System error in program SAPLRRK0 and....Value '_' of characteristic 0EMP...

Folks,
We are using ESS/MSS business packages for integration with BW backend, on trying to access status report using,
Manager Self - Service --> Reports --> Development Discussion Status Reports
We are getting the following warning & error messages on the portal screen:
Value '_' of characteristic 0EMPLOYEE is not a number with 000008 spaces
System error in program SAPLRRK0 and form SET_SIDFIX_01-01-
On the face, it looks like a BW error (a BEx query error) being propagated and getting caught by the portal screen.
Any pointers in resolve this will be appreciated with maximum points..
Please let me know.
Cheers
Paras

Thanks Nikhil,
Request your guidance on this, I am new to ESS/MSS business packages and using BW as a backend.
Can I expect to have any errors in configuration (from the portal end) for this kind of error/messages to come up ? If yes, pls gimme pointers to resolve this discrepancy or is this some BEx query error due inconsistencies in employee master data ?
Please let me know.
Paras

Similar Messages

  • System error in program SAPLRRK0 and form LRECH_AGGR_ELSE-01

    Hi...
    Hope someone can help me with this issue.
    Im getting this error in some querys:
    System error in program SAPLRRK0 and form LRECH_AGGR_ELSE-01
    All of these querys were working fine, suddenly im getting this error and i dont have idea why it can be, maybe a bad configuration on the server or i dont know...
    Thanks and regards!

    Hi ,
    I got the same error message  in the following scenario.
    I determine the value of calculated key figure KF1 using if else condition.
    I have to use KF1 in another calculated key figure KF2 .
    I get this error message when I use KF1 in KF2.
    I do not get this error message when I do not use KF1 in any of the calculated key figures.
    Can you please advise how can I resolve this issue .
    Is there any other way to use KF1 in  KF2.
    Thanks
    Srinivas

  • Abort system error in program SAPLRRK0 and from RSRDR(CHECK_NAV_INIT_BACK)

    Hi guys,
    any can help how to solve below error.
    Abort system error in program SAPLRRK0 and from RSRDR(CHECK_NAV_INIT_BACK)
    regards
    raja

    Hello ,
               Check the following note 578948 and see if you could get some help.
    hope it helps
    assign points if useful

  • System error in program SAPLRRK0 and form RSRDR;SRRK0F30-01-

    Hi
    when i execute the query on remote cube we are getting the error like below
    System error in program SAPLRRK0 and form RSRDR;SRRK0F30-01-
    We have Remote cube acessing the oracle views through ud connect .Can any one please let me know whats the issue is ?.we are using BW3.5 PATCH LEVEL 15…

    Hi,
    see that there is master data deletions..  if so how did you delete the master data.. then  check   RSRV to analyse and repair your infocube
    or    tablespace problem (PSAPTEMP),  check with basis.
    check transaction sm21, there may contains tablespace name. ask your basis to fix the tablespace PSAPTEMP problem. after that you should be able to execute the report
    or Go to ST22 and check the shortdumps ( few) and follow the debugger to know the actual cause... it   could be errors in the info object mapping ....

  • System error in program SAPLRRK0 and form LRECH_AGGR_BNR-02

    Hello experts,
    I am facing an issue when executing a query getting the following error
    "System error in program SAPLRRK0 and form LRECH_AGGR_BNR-02"
    In my query I am using replacement path formula variable, I tried without that formula variable also but still getting the same error.
    we are on BI 7.0 & SP14 and searched for OSS notes as well but this error is occuring in SP9, SP12, SP16, SP17 and SP18.
    Just wondering if anyone faced same problem and  have any interim solution apart from upgrading the Support packs.
    Thanks a lot in advance.
    Best Regards
    VJ

    Hi,
    Check with links....This is program error.
    1. Note 1011069 - System error in SAPLRRK0 and form LRECH_AGGR_BNR-02-
    2. Note 961002 - X299: System error in SAPLRRK0 and LRECH_AGGR_BNR-02-
    3. Note 1082605 - Termination BRAIN 299 in SAPLRRK0; LRECH_AGGR_BNR-02-
    4. Note 993288 - Composite note: Formula vars. w/ replacement path BI7.0 SP09
    Regards,
    Srini Nookala

  • System error in program SAPLRRK0 and form MEGA_SORT_H-05-

    Hi,
    Any idea what could be the reason in getting the above error message 'System error in program SAPLRRK0 and form MEGA_SORT_H-05-'.
    We are getting this error while executing the query and activating the hierarchy nodes.
    Regards
    Ramesh Ganji

    Which version of BI are you using-  lots of notes on MEGA_SORT_H -
    also mention your SP Levels.
    BW-BEX-ET 956865 Expanding nodes to level n does not work 28.07.2006
    BW-BEX-OT-OLAP 602070 Missing leaves in a hierarchy display 07.03.2003
    BW-BEX-OT-OLAP 857895 'Suppress results' for the display hierarchy 27.11.2006
    BW-BEX-OT-OLAP 989872 # Entries when sorting in descending order by key or text 09.11.2006
    Arun

  • System Error in program SAPLRRK0 and form NODE_SET_TO_NODE-01

    Encountered this problem in restricting query on hierarchy variable. Let me know if anyone has faced a similar problem.
    Thanks.

    Hi Farhan,
    About Deactivating: This can be done from the report results itself using the context menu. However as in your case the query is not generating the results, I was talking about turning off the hierarchy in the characteristic properties. For the Char on which you have the hierarchy set, right click > properties and uncheck the check box on the right hand side where the hierarchy is set. This will keep the hierarchy available for the report, but not in view initially.
    About your problem: Could it be something to do with the user's authorisation...usually this would give a not authorised message, but still just to check. Can you try to run the report using transaction RSSMQ with the user's ID and look at any messages generated...

  • Error Specify a value for variable-Abort System error in program SAPLRRK0 a

    Dear Experts,
    Could anyone help me to fix this issue?
    I have an Customer exit variable in my query to calulate the first week of the prior year value as per the system calendar. when i execute the query, I am receiving the following error messaged and i am throwing out from the BW server.
    The error message is
    Error Specify a value for variable ZR00**
    Abort System error in program SAPLRRK0 and form APPEND_KHANDLE_1-01-
    Many thanks in advance.
    Regards.
    Krishna.

    Hi Kishor,
    try runnig the same query in RSRT, with execute and debug option.
    Also check in query designer for its correctness.
    Hope this helps...
    Regards,
    umesh

  • System error in program SAPLRRK0

    Hi All,
    Every day morning when I execute a query iam getting these messages
    SQL Error: 768-
    System error in program SAPLRRK0 and form RSRDR;SRRK0F30-01-
    but after some time when i execute the same query its running fine. Iam getting this every day morning when i execute any query for the first time. I tried to look about this in service.sap but unable to figure it out. Does any one had this kind of problem if so please let me know what exactly needs to be done. We are currently using BW 3.5
    Thank you all,
    Padma

    Hi ,
    Wen you run first time,If there are any loads going on the data target on which you are running your query, you may get this error. Make sure there are no loads on the data you are reporting on.
    Regards
    Manga

  • Abort system error in program SAPLRRK0

    Hi All,
    I have gone thru many forums and I also read a post of similar problem but I think mine is diff from all of them.
    When one of user is running the Query he is seeing a error message saying:
    ABORT system error in program SAPLRRK0 and form RSRDR;SRRK0F30-01-.
    Once he close the session and open back he is ok. I tried to refresh on my PC and I am ok and I didn't see any messages. I really don't have any idea why this is happening.
    I read OSS note-734184 but it's not detailed.I don;t think we can apply support pack now because they are crunning their month end reports and there is no time to do that now.
    Your responses are really appreciated!
    Thanks
    AP

    Praveen,
    Thanks for the quick info.
    I went to SM21 and I saw this message on that user    R49 Communication error, CPIC return code 020, SAP return code 223
    But I don't know is this message related to that and because I am seeing same message for another user and she don't have any issues at all with the same query.
    That surprises me!
    Any clues?????

  • Abort System Error in Program SAPLRRV and for RRSV_CHAVL_TO_VALUE_CONVERT

    Hello SDN
    While refreshing a query in a Workbook, I have received this error message and getting disconnecting form the BW server.
    "Abort System Error in Program SAPLRRV and for RRSV_CHAVL_TO_VALUE_CONVERT"
    Does anyone has any idea? It is happening in Production and need to fix it as soon as possible.
    Appreciate any help and points will be assigned for useful information.
    Thanks
    kumar

    Hi Dinesh
    It is stopping at the BREAK-POINT in Function LRRMSU13(RRMS_X_MESSAGE)
    variable_screen=X&template_id=0QUERY_TEMPLATE
    In the messages , For generation, it display:
    &CAUSE&
    The query contains selection elements with "Constant Selection". Such a
    query cannot be run in the read mode 'Read Everything at Once'.
    &SYSTEM_RESPONSE&
    The read mode is automatically converted.
    &SYS_ADMIN&
    In the Variables, I see
    &CAUSE&
    Variable <(>&<)>V1& is used in the query in such a way, that an
    optional entry is not possible.
    For example, you might be using an "Exclude", or the variable might be
    connected using OR to additional selections for <(>&<)>V2& in the
    global filter, but is still displayed in the columns selections.
    It is also not possible to use an optional parameter variable to fill
    an interval selection in either the from-field or the to-field.
    &SYSTEM_RESPONSE&
    &WHAT_TO_DO&
    If you are able to accept the mandatory entry, you need not do
    anything. Otherwise you must work with several variables in the query.
    You can use an optional interval variable to do this.
    &SYS_ADMIN&
    For Key Figs :
    &CAUSE&
    Quantities are multiplied with values for the key figure &V2& (&V1&).
    This is not sensible.
    A basic key figure was probably defined that contain a price. Only
    addable amounts should be written on the database. Ratios and prices
    are calculated as key figures. Therefore, the system maintains the
    correct sequence, meaning summing takes place on every place and then
    the quotient is formed.
    If a 'price amount' is saved as a basic key figure after all then the
    'non-aggregated indicator' can be undone using 'Change key figure'.
    Therefore, the system carries out the multiplication (or division)
    before the summing. The key figure is then assigned to the group 'Other
    columns'.
    &WHAT_TO_DO&
    Please check the definition of the key figure &V2& (&V1&).
    <DS:TRAN.KDNN>Check or change key figure &V1&</>
    Can you please let me know how to fix this issue?
    Thanks
    Kuamr

  • System error in program SAPLRRI2 and form LRECH1_VARIABLE-02- 0

    Hi Experts,
    I have created a query on ODS when i am  executing the Query it is giveing the following System error.
    <b>System error in program SAPLRRI2 and form LRECH1_VARIABLE-02- 0</b>
    Pl.let me know how to resolve it.
    Thanks in Advance
    Sirisha

    Hi,
    Check all variables, you use in your query, together with variables used in restricted KF and text variables. It seems, that you use in one of your variables values from the other one which is missing in your query, and system cannot find the source.
    Hope it helps,
    DL

  • BRAIN299 System error in program CL_RSR and form _CHACONST_SID-02

    I am getting the following error when trying to update and activate my multi providers.
    BRAIN299 System error in program CL_RSR and form CHACONSTSID-02
    Info cubes syntax check is fine.

    Hi,
    try to implement this SAP note:
    InfoObjects: Unintentional characteristic constant
    SAP Note Number: [1080800|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_whm/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d31303830383030%7d] 
    Symptom
    In the maintenance transaction for InfoObjects, the system displays no value in the 'Constant' field. However, you use the InfoObject, for example in a query, and the system behaves as if a value were set. This may cause unexpected behavior or errors.
    Other terms
    InfoObjects, characteristic, characteristic constant, CHACONST, CL_RSR _CHACONST-SID-02-, EXCRT
    Regards
    Andreas

  • System error in program CL_RSR_WWW_RENDERER and form GET_NORM

    when i exicute the query, after exicution if i right click on the character >go to the properties
    iam getting the fallowing error-*System error in program CL_RSR_WWW_RENDERER and form GET_NORM (see long text)*

    Hi Gandapudi,
    The "Only values from Navigation" refers to get data with the posted values only.
    You can specify how filter values are to be selected for query execution:
    ●      Only Posted Values for Navigation
    The system displays posted values only.
    ●      Only Values in InfoProvider
    The system displays only those values that are in the InfoProvider.
    ●      Values in Master Data Table
    The system displays all characteristic values from the master data, independently of transaction data.
    ●      Characteristic Relationships
    The system uses the current restrictions from the filter of the query and only displays the characteristic values that are valid according to the characteristic relationships.
    Refer the link for more information
    http://help.sap.com/saphelp_nw70/helpdata/EN/f1/0a5673e09411d2acb90000e829fbfe/frameset.htm
    Regards,
    Ravi Kanth

  • System error in program cl_rsr and form _chaconst_sid-02-

    Hi,
    last week we upgraded our BW from 3.1 to 7.0 (SP15). Since them we have problems with a query.
    If I execute a querydefinition in BEX, the message "system error in program cl_rsr and form chaconstsid-02-" pops up.
    Please let us know what can be the problem and the solution.
    Thanks in advance and best regards.
    Detlef

    Hi,
    try to implement this SAP note:
    InfoObjects: Unintentional characteristic constant
    SAP Note Number: [1080800|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_whm/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d31303830383030%7d] 
    Symptom
    In the maintenance transaction for InfoObjects, the system displays no value in the 'Constant' field. However, you use the InfoObject, for example in a query, and the system behaves as if a value were set. This may cause unexpected behavior or errors.
    Other terms
    InfoObjects, characteristic, characteristic constant, CHACONST, CL_RSR _CHACONST-SID-02-, EXCRT
    Regards
    Andreas

Maybe you are looking for