System Error in program SAPLRRS2 and form GET_SID-1 -(see long text)

Hello all,
One of the users is trying to run a report in Production using BEx analyser and gets the following error.
BI Server error:
Program error in class SAPMSSY1 method: UNCAUGHT_EXCEPTION
System Error in program SAPLRRS2 and form GET_SID-1 -(see long text)
I have already run the SAP Note 1237190 but there is no use as the error comes up again.
Could any one please help to resolve this issue.
Thanks
Phani.

Hi Dipika
Thanks for the reply.
But I dont think that note is applicable for this error as this error pops as soon as the selection screen is past and before the report is displayed.
This is not happening with all the users though.
Its a random problem only.
Thanks
Phani.

Similar Messages

  • System error in program CL_RSR and form GET_PROVID-02-(see long text)

    Hi,
    If i execute a cube contents,i am getting  this message "System error in program CL_RSR and form GET_PROVID-02- (see long test)" , due to this error data has not appeared,only structure appeared in the cube.
    When we execute a query in the BEX,I got the message "System error in program CL_RSR and form GET_PROVID-02- (see long test)"
    Please let us know what can be the problem and the solution.
    Thanks in advance and best regards.
    kumar

    Hello,
    Open the query in query designer and perform query check. The query might have erroraneous elements.
    Regards,
    Shashank

  • System error in program CL_RSR and form GET_PROVID-02- (see long test)

    Hi,
    If i execute a cube contents,i have getting this message  "System error in program CL_RSR and form GET_PROVID-02- (see long test)" , due to this error no data has appeared only structure appeared
    If I execute a query in BEX, the message "System error in program CL_RSR and form GET_PROVID-02- (see long test)"
    Please let us know what can be the problem and the solution.
    Thanks in advance and best regards.
    kumar

    can you post the message in st22 and sm21 for the error?

  • Abort System Error in program SAPLRRS2 and form INITFL_ASSIGN-01 error

    Hi All,
    When I refresh a query/workbook getting following error message and can not proceed further..
    Abort System Error in program SAPLRRS2 and form INITFL_ASSIGN-01
    We are using BW 3.5 and BEX reports.
    I'd appreciate if you could help me on this

    I don't know if you have since been able to resolve this problem.
    Anyway, for future reference, I have just had the same error message and was able to resolve it by simply removing and then reinstalling one of the characteristics, together with its variables and filters, in the free characteristics section of the query.
    Hope that this is of help to someone.

  • System error in program SAPLRRS2 and form SELOPT_ASSIGN-01-

    Hi there
    I get the error message
    "System error in program SAPLRRS2 and form SELOPT_ASSIGN-01-"
    when trying to run a web template from the portal. If I run it from WAD, it runs perfectly. If I then run the same template from the portal, with the same user, I get the above error message.
    If I click on the message, I get further information, which says
    "Portal Runtime Error
    An exception occurred while processing a request for :
    iView : com.sap.portal.contentfetching.BWTunnel
    Component Name : com.sap.portal.contentfetching.BWTunnel"
    Any ideas on what this can be?
    I am able to run other templates as this user.
    Cheers,
    Andrew

    Go to RSRT transaction and Generate the report (query) once again.
    Hope it works.
    Regards

  • System error in program SAPLRRS2 and form SELOPT_ASSIGN-01- (SAP BW 3.5)

    Hi,
    The following error occured when executed a query :
    "System error in program SAPLRRS2 and form SELOPT_ASSIGN-01-"
    I have read OSS note 907533 but from what I see in this note, I conclude the repair instruction
    only for SAP BI 7.0 so this note not for SAP BW 3.5.
    I have use button "Check query" and everthing is fine.
    Is there someone who can solve my problem?Thank you
    Regards,
    Satria

    This question is interesting. 
    One of my users got the same message today.  Wednesday, she ran some queries that had 3 variables on them.  She had no problems.  Yesterday, she tried to run the same queries, and one of the three variables did not show up on the variable screen.  The characteristic in question is not authorization relevent.  Others had no problems with these queries. 
    Today, I created a new query using the characteristic with no variables.  It ran fine for her.  I added the variable and she got the error message.
    So, I would really appreciate an answer to this thread!
    Ginny

  • System error in program SAPLRRI2 and form GET_QUERY_PROPERTIES-01

    Hi All,
    I'm configuring the integration between BW 7 SP 11 and Portal 7 SP11. I have problems in the IP functions.
    The following error ocurrs in QueryDesigner when trying to execute a Query that is on an <b>Agregation Level</b> :
    <i>The initial exception that caused the request to fail, was:
    Termination message sent
    ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
      MSGV1: SAPMSSY1
      MSGV3: UNCAUGHT_EXCEPTION
    com.sap.ip.bi.base.application.exceptions.AbortMessageRuntimeException: Termination message sent
    ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
      MSGV1: SAPMSSY1
      MSGV3: UNCAUGHT_EXCEPTION
    at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessageInternal(MessageManager.java:148)
    at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessage(MessageManager.java:113)
    ABEND: Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
    ABEND: System error in program SAPLRRI2 and form GET_QUERY_PROPERTIES-01- (see long text)</i>
    When I execute Querys that are on Infoproviders, everything is ok.
    Any Idea??
    Thnks a lot!!!
    Yolanda.

    Hi,
    Are you getting an ST22 dump in the backend, we used to get this kind of error in case of hierarchies, please check 2 things
    1. Agg level is active
    2. Check the query (option is available on query designer)
    thanks

  • System error in program SAPLRRI2 and form INPUTABLE_CHAFREE-02

    Hello experts,
    I get the following error when I execute the input ready query which was created on the aggregation level in BI IP.
    The system information is SAP BI Add on 7.X(based on 7.10) SP 2,Patch 1, Revision 490.
    Thanks
    Terminate: System error in program SAPLRRI2 and form INPUTABLE_CHAFREE-02- (see long text) [A299(BRAIN)]
    Diagnosis
    This internal error is an intended termination resulting from a program state that is not permitted.
    Procedure
    Analyze the situation and inform SAP.
    If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
    For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.

    You may wish to check this
    Note 1048923 - BRAIN X299 in SAPLRRI2; form INPUTABLE_CHAFREE-02-
    Hopeit Helps
    Chetan
    @CP..

  • System error in program SAPLRRI2 and form BEST_WGR_02-01-

    Hi Friends,
    When I am trying to execute a query i get the error message below.
    System error in program SAPLRRI2 and form BEST_WGR_02-01- (see long text)
    Error when generating dataProvider
    The Same query can be executed after restarting BI server.( Hope No one recommends restarting BI server always).
    I am using SAP BI Patch level 3.
    Internet explorer 7
    Gui 6.4
    At the same time it is unable to disply variable screen in BEx Analyser with IE 7(Variable entry Screen appeares but No Input boxes are seen). Its Working fine with IE 6.
    Any Solution For This.
    Many Thanks,
    Anand

    Hi
    IE 7 is not so compitable with BEx. It always has the Popups problem..
    See the Note :919196 and  Note 1159538 - Issues in Internet Explorer   Note 950975 - SAP GUI for Windows: Support for IE7 (Internet Explorer 7)
    Hope it helps

  • System error in program CL_RSR and form GET_CHANMID-02-

    System error in program CL_RSR and form GET_CHANMID-02- (see long text)
    Message no. BRAIN299
    Diagnosis
    This internal error is an intended termination resulting from a program state that is not permitted.
    Procedure
    Analyze the situation and inform SAP.
    If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
    For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
    I got this error in SCM IDES 7.0,  Planning Area Initialization and Display MPOS...Please help me...

    Hi,
    One of our planning sequence is failing in production with similar error. Could you please let us know what is the fix for the issue you faced.
    System error in program CL_RSR and form GET_CHANM-01
    Please advice as this is very critical.
    Thanks,
    Tintu

  • Executing query error: System error in program SAPLRRI2 and form REP_A

    Hello Experts,
    I am facing problem while executing query.
    I have activated a query from BI content. The query is activated successfully in development and running successfully in development, so I transported the same into QA.
    When I execute this query into quality, automatically debuger opens. After I come out of debuger I get following error message:
    " >> Row: 82 Inc: LRRMSU13 Prog: SAPLRRMS
    System error in program SAPLRRI2 and form REP_ASSIGN_INITIAL_OPT-01- (see long text)
    Error when generating dataProvider "
    This query is using some standard structures, which are running successfully in other queries in QA.
    what would be an issue?
    Regards,
    Nirav Shah

    Hi,
      Try to regenerate the query in RSRT t.code.
       ie) RSRT - give the query name - Generate report ( icon will be there near to Execute + debug) .
    After generating the report, (logoff and login )try to execute the query again ..if the above solution doesn't work, check the below OSS notes which may help for you.
    OSS notes : 1. 1121766
                       2. 1117966
                       3. 1225856
    Regards,
    Siva.

  • System error in program CL_RSR_RRK0_PARTITION and form NOTIFY_READ_REQUEST-

    Hi,
    I am getting following error while running BI -Query
    "System error in program CL_RSR_RRK0_PARTITION and form NOTIFY_READ_REQUEST-01- (see long text)"
    I generated query in RSRT yesterday and it fixed the problem. But , today morning again i am seeing the same error.
    Thanks in advance,

    you may wish to check this note
    Note 1049671 - CL_RSR_RRK0_PARTITION and IF_RSR_RRK0_PARTITION~BROWSE-01-
    use tcode - SNOTE to download this note for implementation and if do not work can revert it back to original.
    Hope it Helps
    Chetan
    @CP..

  • "abort system error in program CL RSR and form GET_PROVID-02-(see long text

    Hi All,
    When i try to excuting bex query in analyser and whaen i have to exucuting cube contents, i got this error message :
    "abort system error in program CL RSR and form GET_PROVID-02-(see long text)"
    System error in program CL_RSR and form GET_PROVID-02- (see long text)
    Message no. BRAIN299
    Diagnosis
    This internal error is an intended termination resulting from a program state that is not permitted.
    Procedure
    Analyze the situation and inform SAP.
    If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
    For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
    Can anyone help me?
    kumar.

    Hi , could you please check note 1166294 and check if the issue will be fixed ?
    1166294-BRAIN 299 in CL_RSR, form GET_CHANMID-02-
    Thanks,
    Walter Oliveira.

  • System error in program CL_RSR_RRK0_CURR and form GET_SX_CURR-01

    When i execute a report after entering the selection criteria, I get the following error:
    System error in program CL_RSR_RRK0_CURR and form GET_SX_CURR-01- (see long text)
    Recently we upgraded to BW EHP1, release 7.01.
    Any help would be grealty appreciated.

    Error while executing report : Error in program CL_RSR_RRK0_CURR
    OSS Note 1030657

  • System error in program CL_RSPLS_DELTA_BUFFER_B and form _CR_DERIVE-01- (se

    Dear All,
    when I execute a planning sequence,  i am getting the following error :" System error in program CL_RSPLS_DELTA_BUFFER_B and form CRDERIVE-01- (see long text)".
    We are on BI 700 sp18 level.
    We applied 1250076 already but no luck.
    please some one suggest some OSS notes.
    Regards,
    Veera

    Hi Veera,
    Check for the characteristic relatioship maintained at the infoprovider level,usually you get this error only when you are trying to post something which is not as per characteristic relatioship.For example:-
    If you have maintained Currency as an attribute of  buisness area and you are deriving it through the Characteristic relatioship then It has to be the same as  that of maintained in master data.
    The following entries are maintained in master data:-
    BA        0currency
    BA10    GBP
    Now if you are trying to post the entries with :
    BA10    INR
    It will through an error message.
    Regards,
    Indu

Maybe you are looking for