System Error in Query

Hi Friends,
When i executing the query in BW3.5, i get the error message like
' System error in program SAPLRRI2 and form CHECK_MAX_MEMMERS-01-'.
Give the solution to me, i'm also using 100 key figure in that query
Thanks in Advance.
Regards,
R. Gopinath
Edited by: Gopi Nath on Sep 29, 2008 10:03 AM

Try executing the quey in RSRT.Check if it works fine there.
If it works here.
Try closing the excel and logging in again and execute (Log in log out method)
Hope this helps.

Similar Messages

System error in opening a query

hi guys,
this is the error i'm getting when opening this query which i need for my CR
Abort System error in program in SAPLRR12 and form cell_fuellen_acell-01
Diagnosis:
This internal error is a targeted termination since the program has an
incorrect status.
what is needed to be done here
Your help will be rightly appreciated
Thanks

Hi Vj,
Please check the SAP notes as below, which seems to be relevant for your issue.
Assign points it useful.....
Symptom
There are errors in Business Explorer components such as Analyzer, Browser, Form Reporting, Web Application Designer, Query Designer, Map, OLE DB for OLAP Provider
Solution General information
This note contains information about BW 3.0A front end patch 3. Here, you will find the most important information on:
Installation
Error corrections
New features
Additional general information that is not specifically for this BW front end patch.
Procedure
Downloading BW front end patches via FTP from sapserv
Downloading a BW front end patch via Online Correction Support (SAPnet)
Preparing the Installation Server
Checking the Installation Server
Installation on PC
Checking the PC
Problems during the installation of the BW front end Patch
Distributing a patch per script (for administrators only)
Installation
During the installation of the BW front end patch, note the following:
(This area is constantly updated)
The BW 3.0A front end patch 3 is based on the SAP GUI 6.10 Presentation CD 1 (6.10 Final Compilation 3, material number 50051811) and the SAP GUI 6.10 patch 12 or higher.
The BW 3.0A front end patch 3 contains all files, to convert a BW 2.0B/2.1C front end into a BW 3.0A front end.
The BW 3.0A front end is downward-compatible to BW 2.0B/2.C.Thus, it can also be used on BW 2.0B/2.1C backend systems.
When you use the Web Application Designer, implement at least BW 3.0A Support Package 03 (see note 425995).
Error corrections
This BW front end patch corrects the following errors in particular:
in SAP Business Explorer Analyzer
Displaying document links on filter cells and text elements
Improved performance for low-speed connections (WAN)
Bug:Incorrect language when starting documents in the Web browser (refer to note 450200)
Bug:Import of missing styles does not import the color palette anymore (refer to note 450194)
Bug:Various problems during the server logon as of Release 2.0 (incorrect list of Goto destinations, incorrectly indented hierarchy symbols...)
Bug: Starting jump destinations in the Web does not work
in BEx Query Designer
The system does not correctly interpret characteristics that were selected as being unique in each cell and when it checks these characteristics, it mistakenly reports them as being defined non-uniquely.
After you called the cell editor, you had to press the toolbar buttons twice to call the required function.
In the cell editor, you could change the formula cells but not the formulas of the columns or of the rows because the system displayed all references to other columns or rows as 25 digit numbers.
When you use Save as ... for queries with formula cells, these cells are not copied.
When you used the Save as ... function for queries with cells, the copied query sometimes displayed the message "Brain 299 SAPLRRI2 Form CELL_FUELLEN_ACELL-01-" when it was executed.
When you used the Save as ... function for queries with formula cells, these cells were not copied.
in Variable Editor
Formula variables that were replaced with the "To" value in intervals, were displayed without the "To" selection when you changed them.
in SAP Business Explorer Browser
Drag&Drop of Japanese file names on Japanese WinNT computers is now supported
Temporary files are automatically deleted when the BEx Browser is exited
New features
New features delivered with this BW front end patch:
SAP Business Explorer Analyzer
Delete function in dialog "Open -> Views"
Displaying documents for text elements and filter values
Now the BW front end is installed in a separate program folder in the start menu. The folder is called 'Business Explorer'.The setup only allows you to change the name of the folder of the SAP front end.
Procedure
1. Downloading the BW front end patch via FTP or SAPnet
2. Preparing and checking the installation server
3. Installing and checking on the PC
Note that you cannot install a BW front end patch directly on a PC (also see the 'Distribution of a patch by script' section).
The check of every step with SAPBEXC.XLA avoids unnecessary subsequent problems.
Downloading BW front end patches via FTP from sapserv
Downloading patches from the sapserv is described in note 96885, "Downloading a front end patch from SAPSERVx".
The BW 3.0A front end patches and the SAP GUI 6.10 patches are in the directory
   sapservX/general/frontend/patches/rel610/Windows/Win32
The file name of the BW front end patch is
   BW30A_n.EXE (where 'n' is the number of the BW front end patch)
The file name of the SAP GUI patch is
   GUI610_n.EXE (where 'n' is the number of the SAP GUI patch)
In general, you can use the highest existing SAP GUI patch.The above-mentioned number of the SAP GUI patch is the minimum requirement.
Downloading a BW front end patch via Online Correction Support (SAPnet)
You can also download BW front end patches in the SAPnet.The URL for the SAP Online Correction Support is:
   http://service.sap.com/swcenter-main
After you select SAP BW/SAP BW 3.0A/Binary Patches/SAP GUI for Windows 6.10/Win32 in the tree on the right side, the SAP Download Area appears on the left side.
Here you can select BW30A.EXE and, if necessary, GUI610.EXE for downloading.
In general, you can use the highest existing SAP GUI patch.The above-mentioned number of the SAP GUI patch is the minimum requirement.
Preparing the Installation Server
The installation of patches on the installation server is described in note 361222. Follow the instructions in this note.
A BW front end patch contains all files from the previous patches, so that you only need to install the latest patch.
Checking the Installation Server
Note 197460, "BW front end Checktool sapbexc.xla", describes how easily and quickly you can check the installation server.
Installation on PC
The BW front end patch is installed by executing the SAP GUI setup.In the setup, you must select the BW add-ons component to install the BW front end.
See also the section distribution of a patch per script.
Checking the PC
Note 197460, "BW front end Checktool sapbexc.xla", describes how simple and fast the local installation checks a PC
The local execution of SAPBEXC.XLA is necessary if you sent problems to the SAP Support (see note 142705).The status of a PC can be checked with the result of SAPBEXC.XLA.
Problems during the installation of the BW front end patch
If problems occur during the installation of the BW front end patches, you should install the BW front end patch again and use the following method for this:
First, remove the BW front end with "Remove" menu option under "SAP front end" from your local PC.
Afterwards you can install the front end programs again with the setup program of your setup server.The setup program has been delivered with the front end CD.You must have administrator rights on the local PC.During the setup, no other programs (for example, Excel) should run.
Certain programs save information on OLE components in special files.These files are not updated automatically during a new installation, therefore, when you change the OLE component during the installation, old information may remain in the system.We recommend you delete all files with the extensions ".EXD" and ".OCA" before you carry out the new installation.
Distributing a patch per script (for administrators only)
There is a large number of products for the distribution of software (for example, Microsoft SMS, IBM Tivoli, NetSupport NetInstall), so that no individual Support is possible when you use SAP and BW.There are two general notes about the front end installation (153341 and 194859), to which the system also refers.
The following remarks are intended for administrators who want to distribute a BW front end patch with such a software.
A BW front end patch consists of several files in different directories. These directories correspond to the directories on the installation server or on the CD.The files are usually distributed into the following directories on the local PC:
c:\program files\common files\sap\system
c:\program files\sappc
c:\winnt\system32 or c:\windows\system
In the sapbexc.xla file on the "Version" tab, there are notes about where the file must be copied to and whether it must be registered.
For the preparation of a script, first you should make a normal installation on a local PC from the installation server which must be checked with sapbexc.xla (see note 197460).Afterwards you can localize the corresponding directory of a file using this PC.In general, each DLL and each OCX must be registered if it can be registered.After the installation per script, a deinstallation may no longer work, therefore, before registering a file with regsvr32.exe <Path\File>, you should execute the script for an unregistration with regsvr32.exe /U <path\file>.
Currently, the sapbexc.xla checktool may not be able to recognize certain installation errors (copy without registrations) (see note 206609).
SAP offers support for problems with incorrect scripts for distributing patches.
Best Regards,
DMK
Assign Points if it helps....

Serious system error while executing the query: java.lang.OutOfMemoryError

From ALSB, we are trying to insert records in a table, by calling the ALDSP webservice. It is working fine when the xml (ie., given as input to the ALDSP webservice) is small. But facing the following error when the input xml size is large.
<ALDSP> <BEA-000000> <Product> <Serious system error while executing the query:
{ld:ABC/Test}createTest:1
java.lang.OutOfMemoryError: Java heap space
We do not want to increase the heap size. Is there any other way we can solve this problem?

In logical dataservice of ALDSP we have created a procedure called createTest, which is used to insert mulitple rows in the table. We have created a webservice for that logical DataService.
Using the ALSB, we are calling the webservice -> createTest Operation and we are passing xml as input to that createTest function.
Input xml:
<ns1:createTest>
<ns1:createTemps>
<ns0:createTemp>
     <ns0:field1>1</ns0:field1>
          <ns0:field10>test1</ns0:field10>
</ns0:createTemp>
<ns0:createTemp>
     <ns0:field1>2</ns0:field1>
          <ns0:field10>test2</ns0:field10>
</ns0:createTemp>
     </ns1:createTemps>
</ns1:createTest>
each ns0:createTemp represent a row that need to be inserted in the table.
When the number of ns0:createTemp is less ( when the number of rows that need to be inserted is less) then no problem occurs, it is getting inserted properly. But when there are more number of ns0:createTemp then we are getting the following error
<ALDSP> <BEA-000000> <Product> <Serious system error while executing the query:
{ld:ABC/Test}createTest:1
java.lang.OutOfMemoryError: Java heap space

System error when I refresh a query/WB

Hi All,
When I refresh a query/workbook getting following error message and can not proceed further..
<b>Abort System Error in program SAPLRRS2 and form INITFL_ASSIGN-01</b>
We are using BW 3.5 and BEX reports.
I'd appreciate if you could help me on this
Thanks
BI Consultant

What variables are you using in your query? This error essentially occurs when the variable values are not correctly transferred resulting in a high volume data selection. Do you have any mandatory variables in the query? Are they getting filled the first tiem round?

Executing query error: System error in program SAPLRRI2 and form REP_A

Hello Experts,
I am facing problem while executing query.
I have activated a query from BI content. The query is activated successfully in development and running successfully in development, so I transported the same into QA.
When I execute this query into quality, automatically debuger opens. After I come out of debuger I get following error message:
" >> Row: 82 Inc: LRRMSU13 Prog: SAPLRRMS
System error in program SAPLRRI2 and form REP_ASSIGN_INITIAL_OPT-01- (see long text)
Error when generating dataProvider "
This query is using some standard structures, which are running successfully in other queries in QA.
what would be an issue?
Regards,
Nirav Shah

Hi,
Try to regenerate the query in RSRT t.code.
   ie) RSRT - give the query name - Generate report ( icon will be there near to Execute + debug) .
After generating the report, (logoff and login )try to execute the query again ..if the above solution doesn't work, check the below OSS notes which may help for you.
OSS notes : 1. 1121766
                   2. 1117966
                   3. 1225856
Regards,
Siva.

Abort system error when opening the BEx query

When runing the Bex query I get this error
' SQL Error 1578 - Abort system error in program SAPLRRKO and form RSRDR;SRRK0F30_01_'
Diagnosis: Internal error is a targetted termination since the program has an incorrect status.
Please advice me how to correct this issue.
Thanks in advance.
Taj

Hey,
Thanks for your answer , I assigned a points to you. still I need more info on this then what to do further.If this was caused due to program error then what I have to do.
Version: 3.50, Package :SAPak35012 .
Please let me know is this something basis needs to take care of this? .
Looking forward to hear from you.
Taj
Message was edited by: Tamkris Taj
Message was edited by: Tamkris Taj

Change Own Data - System error: query could not be found

Hi Experts,
Please help me on the above issue.
Change Own data is not working in QA environment. Configuration changes related to Change own data does not prompt for a transport request. I have trasnsported T77WWW_WHO entries to QA.
Here is the table entry.
08     /SAPQUERY/HR_XX_PA_ESS     Y ESS_WHOS_WHO GB     SY000000000142     SY000000000143
I dont have any clue about this issue. No ST22 dump is also generated.
Thanks in advance.
Cheers
Jay

Critical Error
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator.
System error: query could not be found
System error: query could not be found:com.sap.pcuigp.xssfpm.java.FPMRuntimeException: System error: query could not be found
     at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:112)
     at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:122)
     at com.sap.xss.hr.cod.FcCodBusinessLogicComp.callRFCGetDetails(FcCodBusinessLogicComp.java:480)
     at com.sap.xss.hr.cod.FcCodBusinessLogicComp.onInit(FcCodBusinessLogicComp.java:228)
     at com.sap.xss.hr.cod.wdp.InternalFcCodBusinessLogicComp.onInit(InternalFcCodBusinessLogicComp.java:512)
     at com.sap.xss.hr.cod.FcCodBusinessLogicCompInterface.onInit(FcCodBusinessLogicCompInterface.java:115)
     at com.sap.xss.hr.cod.wdp.InternalFcCodBusinessLogicCompInterface.onInit(InternalFcCodBusinessLogicCompInterface.java:147)
     at com.sap.xss.hr.cod.wdp.InternalFcCodBusinessLogicCompInterface$External.onInit(InternalFcCodBusinessLogicCompInterface.java:227)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:922)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:891)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1084)
     at com.sap.xss.hr.cod.start.VcCodStartComp.onInit(VcCodStartComp.java:196)
     at com.sap.xss.hr.cod.start.wdp.InternalVcCodStartComp.onInit(InternalVcCodStartComp.java:156)
     at com.sap.xss.hr.cod.start.VcCodStartCompInterface.onInit(VcCodStartCompInterface.java:161)
     at com.sap.xss.hr.cod.start.wdp.InternalVcCodStartCompInterface.onInit(InternalVcCodStartCompInterface.java:144)
     at com.sap.xss.hr.cod.start.wdp.InternalVcCodStartCompInterface$External.onInit(InternalVcCodStartCompInterface.java:220)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:564)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:756)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:291)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:733)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:668)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:869)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:229)
     at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1344)
     at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:356)
     at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:549)
     at com.sap.portal.pb.PageBuilder.wdDoRefresh(PageBuilder.java:593)
     at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:865)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:684)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:219)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)

BW Jump query - System error in program CL_RSR_REQUEST-VQUERY_FOCUS_IOBJNM

I am trying to perform a jump query from two cubes and when I use the Go to function I received the following message:
System error in program CL_RSR_REQUEST and form
EXECUTE_VQUERY:VQUERY_FOCUS_IOBJNM_MISSING
Message no. BRAIN299
My replacement path variable is perform into a dimension called 0BATCH (Lenght 10) and the SENDER dimension is called ZC_SERIAL (lenght 12).
Is it due to the lenght difference of the field?
Regards,

Hi,
It seems, that you use in one of your variables values from the other one which is missing in your query, and system cannot find the source because of the CHAR length MISS MATCH.
Hope this helps.
Regards

BEx Query : System error in program CL_RSR_LFMM and form GET_CHANM-01

Hi Guru's,
I have a query built over an Infoset (with 3 ODS's and 2 master data Objects)and when I am trying to run the query by selecting Currency Conversion in the Amount key figures I am getting BRAIN 299 System error in program CL_RSR_LFMM and form GET_CHANM-01 Error. If I run without Currency Conversion setting It runs ok.
Any Advice will be appreciated

Solved on my own

Abort system error in program CL_RSDM_READ_MASTER_DATA and form_sidval_dire

HI All,
The following error is thrown when I execute the query.
abort system error in program CL_RSDM_READ_MASTER_DATA and form_sidval_direct_
However, earlier today, I ran this query successfully several times.This Query is on a multiprovider.
Appreciate your help in advance.
Regards,
Harika

Dear Harika,
Try to repair at RSRV and check.
Check: Re: SID error for characteristic
Srini

BW-WebI Report: MDDataSetBW.GetCellData. System error in program

Hi,
I'm trying to run a WebIntelligence Report connected with BW Query but return error before showing the results.
The error is:
Error in MDDataSetBW.GetCellData. System error in program CL_RSDRC_MULTIPROV and form SETRESOLVE-01- (consid.TxtDescrit.). (WIS 10901)
My query in BO contain 8 dimensions and 2 measures.
Someone has been there?
Tks!
Edited by: Peeter Cassiano Antunes Bonomo on Sep 6, 2011 7:33 PM

Ingo,
running the query in RSRT with the same elements works perfectly.The results are displayed.
But tested the MDX query in the transaction MDXTest and entered in the ABAP Debugger, press F8 and the following message appeared:
"The current application triggered a termination with a short dump".
"The current application program detected a situation which really should not occur. Therefore, a termination with a short dump was triggered on purpose by the key word MESSAGE (type x)."
"Short text of error message:
System error in program SAPLRRK0 and form CHECK_KHANDLE (consid.TxtDescrit)."
Does that help?
Tks,
Edited by: Peeter Cassiano Antunes Bonomo on Sep 9, 2011 3:18 PM

Abort System Error in Program SAPLRRV and for RRSV_CHAVL_TO_VALUE_CONVERT

Hello SDN
While refreshing a query in a Workbook, I have received this error message and getting disconnecting form the BW server.
"Abort System Error in Program SAPLRRV and for RRSV_CHAVL_TO_VALUE_CONVERT"
Does anyone has any idea? It is happening in Production and need to fix it as soon as possible.
Appreciate any help and points will be assigned for useful information.
Thanks
kumar

Hi Dinesh
It is stopping at the BREAK-POINT in Function LRRMSU13(RRMS_X_MESSAGE)
variable_screen=X&template_id=0QUERY_TEMPLATE
In the messages , For generation, it display:
&CAUSE&
The query contains selection elements with "Constant Selection". Such a
query cannot be run in the read mode 'Read Everything at Once'.
&SYSTEM_RESPONSE&
The read mode is automatically converted.
&SYS_ADMIN&
In the Variables, I see
&CAUSE&
Variable <(>&<)>V1& is used in the query in such a way, that an
optional entry is not possible.
For example, you might be using an "Exclude", or the variable might be
connected using OR to additional selections for <(>&<)>V2& in the
global filter, but is still displayed in the columns selections.
It is also not possible to use an optional parameter variable to fill
an interval selection in either the from-field or the to-field.
&SYSTEM_RESPONSE&
&WHAT_TO_DO&
If you are able to accept the mandatory entry, you need not do
anything. Otherwise you must work with several variables in the query.
You can use an optional interval variable to do this.
&SYS_ADMIN&
For Key Figs :
&CAUSE&
Quantities are multiplied with values for the key figure &V2& (&V1&).
This is not sensible.
A basic key figure was probably defined that contain a price. Only
addable amounts should be written on the database. Ratios and prices
are calculated as key figures. Therefore, the system maintains the
correct sequence, meaning summing takes place on every place and then
the quotient is formed.
If a 'price amount' is saved as a basic key figure after all then the
'non-aggregated indicator' can be undone using 'Change key figure'.
Therefore, the system carries out the multiplication (or division)
before the summing. The key figure is then assigned to the group 'Other
columns'.
&WHAT_TO_DO&
Please check the definition of the key figure &V2& (&V1&).
<DS:TRAN.KDNN>Check or change key figure &V1&</>
Can you please let me know how to fix this issue?
Thanks
Kuamr

Error in Query (Pls help)

Hi friends,
When i executed one of the queries, i get this error:
Abort System error in program <b>CL_RSDM_READ_MASTER_DATA and form_sidval_direct</b>
Diagnosis
This internal error is a targeted termination since the program has an incorrect status.
Procedure
Analyse the situation and inform SAP.
I have check all my infoobjects and master data...everything is in active but still i dont understand why i get this....
please suggest how to get rid of this error? its urgent
Regards
Balaji

Hi balaji,
This can be program error, need to apply support package or correction,
seems no oss found for form_sidval_direct .....
perhaps it's sid error, try to analyze and repair the infoprovider where the query created on, use transaction RSRV.
hope this helps.
assign points if useful
Regards,
Archna

Error in Query Execution : SQL Error: 1110

Dear Experts,
     We did the system copy from production to Sandbox system. Executing one query got terminated with the following error.
     Error SQL Error: 1110
     Abort System error in program SAPLRRK0 and form RSRDR;SRRK0F30-01-
     I copy this query to the new one and remove all the filter. It works!!!
     Any suggestion on this issue?
Regards

Hi,
check these threads
BEx query error
BEx Query Error
Regards
harikrishna N

Error in Query during Execution CHECK_MAX_MEMMERS-01-??

Hi Experts,
We have faced with a situation like we are unable to refresh the query since there is a error given " Abort System Error in Program SAPLRR12 and form CHECK_MAX_MEMMERS-01-" there was a sap note for this and the latest patch already been installed.We are working on BW release v.3.1 . we did the splitting of the query and it did work for somedays and again same error enocountered..
Is there a restriction from BW to increase number of records to be executed apart from SAP's restriction to 999? Please need a expert advise on this and its time critical for us..
Points will be awarded for helpful answers only...!
Thanking you.

Hi Lasitha,
were u able to sort out this error, i am also facing this problem, i have a huge report with lots of calculation....whenever i execute the query i get the same error........how can this limit be increased ?

System Error in Query

Similar Messages

Maybe you are looking for