System error info to the sender application

Please check the link that you have given.

sorry for skipping this word that..after trying the blog our case isnt working,
when executing sceario with incorrect server address, it fails giving 2 mesg;
1.response mappin error
2.server error
but at sender only mapping error is transmitted
thanks

Similar Messages

  • Runtime Error While executing the WebDynpro Application

    I am getting the Runtime Error While executing the WebDynpro Application. The error message is "TSV_TNEW_OCCURS_NO_ROLL_MEMORY".
    It says like "
    Short text
        No roll storage space of length 9728 available for OCCURS area.
    What happened?
        Each transaction requires some main memory space to process
        application data. If the operating system cannot provide any more
        space, the transaction is terminated.
    But while executing some other Web Dynpro Applications, i am not facing this problem.

    Generally this error is a result of an infinite loop on internal table or select endselect statement where by severs  temporary memory gets full. With no memory to insert new records in temporary memory system generates the dump.
    Check your application or ask basis consultant to look at the memory parameters in instance profile.
    Regards
    Rohit Chowdhary

  • Custom tool error for COMexception: The report application server failed.

    hi there,
    i am using crystal reports for the last one year onwards, i don't get any errors till know. Yesterday when i modified some information in 40 reports. out of these reports 34 reports are successfully build, but for the remaining six reports the code is not generating.
    Custom tool error: "Code generator 'ReportCodeGenerator' failed.  Exception stack = CrystalDecisions.Shared.CrystalReportsException: Load report failed. ---> System.Runtime.InteropServices.COMException: The Report Application Server failed
       at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options)
       at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options)
       at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
       --- End of inner exception stack trace ---
       at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename)
       at CrystalDecisions.VSDesigner.CodeGen.ReportClassWriter..ctor(String filePath)
       at CrystalDecisions.VSDesigner.CodeGen.ReportClassWriter..ctor(String filePath, String resourceNamespace)
       at CrystalDecisions.VSDesigner.CodeGen.ReportCodeGenerator.GenerateCode(String inputFileName, String inputFileContent)"
    i am not understanding why it is getting for me, Please help me

    Hello,
    Whoever wrote the CustomCodeGenerator will have to help you with this one. We know nothing about the underlying code they are using and therefore can't determine the cause.
    Appears the error is it can't even load the report so there is something wrong with the workings. Open the report again in CR Designer and Verify Database and then check the changes you did. Something is not right or the DB driver their application is using does not match with what you are using.
    Don

  • Error when running the  Webdynpro Application

    Hi All,
    I am getting the following error when testing  the WDA Application. Please let me know what can I do to resolve the error. I appreciate the help. Thanks
    The following error text was processed in the system DRD : Screen output without connection to user.
    The error occurred on the application server DOWNEA023_DRD_06 and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    SYSTEM-EXIT of program SAPLSTRD
    Function: TRINT_POPUP_EDIT_CANCEL_SHOW of program SAPLSTRD
    Form: RAISE_ERROR of program SAPLSTRD
    Function: TRINT_OBJECTS_CHECK_AND_INSERT of program SAPLSTRD
    Function: TR_OBJECTS_CHECK of program SAPLSTRD
    Function: RH_HRPOBJECT_CORR_AT_SAVE of program SAPLRHWM
    Form: UPDATE_PLOG of program SAPLRHAP
    Function: RH_UPDATE_DATABASE of program SAPLRHAP
    Form: UPDATE_DATABASE of program MP100100
    Form: LEAVE_ACTUAL_DYNPRO of program MP100100
    Thanks

    I have the same problem.
    I'm trying to open up excel (Bex Analyzer) using the following code:
      call function 'RSAH_LAUNCH_EXCEL'
        exporting
          i_genuniid                 = '4AW30ILXE3NN5MQTO3SW0GUY0'
         i_workbookid               =
          i_hide_sapgui              = 'X'
        importing
          e_log_handle               = l_log_handle
        exceptions
          excel_wrong_version        = 1
          excel_viewer_not_installed = 2
          bexanalyzer_not_installed  = 3
          others                     = 4.

  • "error occurred setting the server application active"

    Hi All,
    I found following error when I save outline in ASO application. It seems that the application cannot be started correctly. Other applications (BSO/ASO) are running correctly.
    "error occurred setting the server application active"

    try this:
    Issue can be from both server and application side:
    1)Addition of SERVERTHREADS with a proper value. When any database operation is requested then monitor the number of process, memory etc. Idea is to identify which process is trying to use max resource on server level.
    2) Also, if possible try and increase the ulimit setting to "unlimited".
    3) Verify NETDELAY and NETRETRYCOUNT -- Guess you have checked this so values should be fine here.
    4) If the environment is windows then:
    a)Open the Registry
    b)Navigate to Local Machine\System\CurrentControlSet\Services\TCPIP\Parameters
    c)Add new DWORD Value named TcpTimedWaitDelay, right click and select Modify. Select decimal radio button, type in 30. (The default value of this parameter is 2 minutes. This is how long it will take for a TCP/IP port that was used by the network for a connection to be released and made available again. 30 sec is the minimum allowed by Microsoft)
    d)Add new DWORD Value named MaxUserPort, right click and select Modify. Select decimal radio button, type in 65534. (The default value is 5000. This determines the highest port number TCP can assign when an application requests an available user port from the system).
    e)Add new DWORD Value named MaxFreeTcbs, right click and select Modify. Select decimal radio button, type in 6250. (The default value is 2000. This determines the number of TCP control blocks (TCBs) the system creates to support active connections. Because each connection requires a control block, this value determines how many active connections TCP can support simultaneously. If all control blocks are used and more connection requests arrive, TCP can prematurely release connections in the TIME_WAIT state in order to free a control block for a new connection).
    f) Reboot the server.
    5) On application side, look at the cache settings, If they are very high then try lowering them and check.
    Cheers!!
    HA:-)
    Edited by: user9513506 on Sep 2, 2008 5:03 AM

  • All of a sudden I'm getting a 'itunes.exe - system error  It says the program can't start because MSVCR80.dll is missing from your computer.  Try reinstalling the program to fix this problem.  I have tried to reinstall and still can't open itunes.  help!

    all of a sudden I'm getting a 'itunes.exe - system error  It says the program can't start because MSVCR80.dll is missing from your computer.  Try reinstalling the program to fix this problem.  I have tried to reinstall and still can't open itunes.  help!

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Serious system error while executing the query: java.lang.OutOfMemoryError

    From ALSB, we are trying to insert records in a table, by calling the ALDSP webservice. It is working fine when the xml (ie., given as input to the ALDSP webservice) is small. But facing the following error when the input xml size is large.
    <ALDSP> <BEA-000000> <Product> <Serious system error while executing the query:
    {ld:ABC/Test}createTest:1
    java.lang.OutOfMemoryError: Java heap space
    We do not want to increase the heap size. Is there any other way we can solve this problem?

    In logical dataservice of ALDSP we have created a procedure called createTest, which is used to insert mulitple rows in the table. We have created a webservice for that logical DataService.
    Using the ALSB, we are calling the webservice -> createTest Operation and we are passing xml as input to that createTest function.
    Input xml:
    <ns1:createTest>
    <ns1:createTemps>
    <ns0:createTemp>
         <ns0:field1>1</ns0:field1>
              <ns0:field10>test1</ns0:field10>
    </ns0:createTemp>                
    <ns0:createTemp>
         <ns0:field1>2</ns0:field1>
              <ns0:field10>test2</ns0:field10>
    </ns0:createTemp>
         </ns1:createTemps>     
    </ns1:createTest>
    each ns0:createTemp represent a row that need to be inserted in the table.
    When the number of ns0:createTemp is less ( when the number of rows that need to be inserted is less) then no problem occurs, it is getting inserted properly. But when there are more number of ns0:createTemp then we are getting the following error
    <ALDSP> <BEA-000000> <Product> <Serious system error while executing the query:
    {ld:ABC/Test}createTest:1
    java.lang.OutOfMemoryError: Java heap space

  • Getting an error while deploying the Quiz application in NWDEV

    Hi,
    I am getting an error while deploying the Quiz application in NWDEV.
    Please check this error log.
    It looks that it is not getting the Question.properties file but the file is already specified
    in the desired location.
    Error log:
    Detailed Error Information
    Detailed Exception Chain
    java.util.MissingResourceException: Can't find bundle for base name com.sap.tc.webdynpro.tutorials.quiz.resources.Questions, locale en_US
         at java.util.ResourceBundle.throwMissingResourceException(ResourceBundle.java:839)
         at java.util.ResourceBundle.getBundleImpl(ResourceBundle.java:808)
         at java.util.ResourceBundle.getBundle(ResourceBundle.java:702)
         at com.sap.tc.webdynpro.serverimpl.core.localization.AbstractResourceHandler.initResourceBundle(AbstractResourceHandler.java:485)
         at com.sap.tc.webdynpro.serverimpl.core.localization.AbstractResourceHandler.loadResourceBundle(AbstractResourceHandler.java:162)
         at com.sap.tc.webdynpro.tutorials.quiz.QuizComp.wdDoInit(QuizComp.java:108)
         at com.sap.tc.webdynpro.tutorials.quiz.wdp.InternalQuizComp.wdDoInit(InternalQuizComp.java:122)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:429)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:700)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:269)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Regards
    Kaushik Banerjee

    Hi,
    I think it is talking the default browser language as US and seraching for the properties file of that language.
    I think the sol for this prob is change the
    Question.properties -
    >Question_en.properties
    Thanks & Regards,
    Lokesh

  • Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\abc.mdf". Operating system error 2: "2(The system cannot find the file specified.)".

    hi,
    am running the below command for moving sql serevr mdf and ldf files  from one  drive to another : c  drive to d drive:
    but am getting the below error
    SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\abc.mdf". Operating system error 2: "2(The system cannot find the file specified.)".
    use master
    DECLARE @DBName nvarchar(50)
    SET @DBName = 'CMP_143'
    DECLARE @RC int
    EXEC @RC = sp_detach_db @DBName
    DECLARE @NewPath nvarchar(1000)
    --SET @NewPath = 'E:\Data\Microsoft SQL Server\Data\';
    SET @NewPath = 'D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\';
    DECLARE @OldPath nvarchar(1000)
    SET @OldPath = 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\';
    DECLARE @DBFileName nvarchar(100)
    SET @DBFileName = @DBName + '.mdf';
    DECLARE @LogFileName nvarchar(100)
    SET @LogFileName = @DBName + '_log.ldf';
    DECLARE @SRCData nvarchar(1000)
    SET @SRCData = @OldPath + @DBFileName;
    DECLARE @SRCLog nvarchar(1000)
    SET @SRCLog = @OldPath + @LogFileName;
    DECLARE @DESTData nvarchar(1000)
    SET @DESTData = @NewPath + @DBFileName;
    DECLARE @DESTLog nvarchar(1000)
    SET @DESTLog = @NewPath + @LogFileName;
    DECLARE @FILEPATH nvarchar(1000);
    DECLARE @LOGPATH nvarchar(1000);
    SET @FILEPATH = N'xcopy /Y "' + @SRCData + N'" "' + @NewPath + '"';
    SET @LOGPATH = N'xcopy /Y "' + @SRCLog + N'" "' + @NewPath + '"';
    exec xp_cmdshell @FILEPATH;
    exec xp_cmdshell @LOGPATH;
    EXEC @RC = sp_attach_db @DBName, @DESTData, @DESTLog
    go
    can anyone pls help how to set the db offline. currently  i  stopped the sql server services from services.msc and started the  sql server agent.
    should i stop both services for moving from one drive to another?
    note: I tried teh below solution but this didint work:
    ALTER DATABASE <DBName> SET OFFLINE WITH ROLLBACK IMMEDIATE
    Update:
    now am getting the message :
    Msg 15010, Level 16, State 1, Procedure sp_detach_db, Line 40
    The database 'CMP_143' does not exist. Supply a valid database name. To see available databases, use sys.databases.
    (3 row(s) affected)
    (3 row(s) affected)
    Msg 5120, Level 16, State 101, Line 1
    Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\CMP_143.mdf". Operating system error 2: "2(The system cannot find the file specified.)".

    First you should have checked the database mdf/ldf name and location by using the command
    Use CMP_143
    Go
    Sp_helpfile
    Looks like your database CMP_143 was successfully detached but mdf/ldf location or name was different that is why it did not get copied to target location.
    Database is already detached that’s why db offline failed
    Msg 15010, Level 16, State 1, Procedure sp_detach_db, Line 40
    The database 'CMP_143' does not exist. Supply a valid database name. To see available databases, use sys.databases.
    EXEC @RC = sp_attach_db @DBName, @DESTData, @DESTLog
    Attached step is failing as there is no mdf file
    Msg 5120, Level 16, State 101, Line 1
    Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\CMP_143.mdf". Operating system error 2: "2(The system cannot find the file specified.)"
    Solution:
    Search for the physical files(mdf/ldf) in the OS and copy to target location and the re-run sp_attach_db with right location and name of mdf/ldf.

  • Itunes will not open, error message reads: The iTunes application could not be opened. An unknown error occurred (13014)

    iTunes 10.4 will not open on my macbook, error message reads:
    The iTunes application could not be opened. An unknown error occurred (13014).
    It won't let me delete and re-install either, thank you for any help!

    are you running any anti virus software on your machine ?

  • KP06 Cost Center Budget Planning System error when locking the data records

    Hi,
    While updating Cost Center Planning system(KP06) its giving the below error:
    System error when locking the data records.
    Message no. KI502
    Diagnosis
    The lock to protect the data records being processed could not be set. The
    probable reason for this is that the SAP locking table is full and no more
    entries can be added.
    Procedure
    Inform your system administrator immediately
    No planning data has been changed
    Message no. K8038
    Diagnosis
    You used Post. While preparing the data for posting, the SAP System
    determined that no changes were made in the available databank values.
    System Response
    A posting activity price is not necessary
    Please help me how can we rectify the above error..
    Thanks
    VS Rao

    Hi,
    check the locking entries (t-code SM12).
    http://help.sap.com/saphelp_erp2004/helpdata/en/37/a2e3ae344411d3acb00000e83539c3/frameset.htm
    Best regards, Christian

  • System error: Level of the default TXJCD is not eq. 1

    Hi Friends,
    We are encountering the following error while releasing a sales document to accounting:
    "System error: Level of the default TXJCD is not eq. 1" Message Number is FF799
    Please check and revert.
    Tks & Rgds,
    Kunal Vichare

    Hey thanks ....
    This obviously has solved your problem.
    Did you encounter a problem with billing as well ? I was told to enter a dummy taxx jurr  for my export customers
    but i honestly dont like that idea.
    Did you have problems in billing as well and did this solve your problem  ?
    Thanks
    Moon

  • Error while deploying the Composite Application ERROR: (SOAPBC_START_1)

    Hi,
    I have a EJB web service created and deployed in GlassFish. I have created a BPEL which will recieve from the web service and then insert into a SQL table. To track the messages I have also created to File WSDLs to save the WS message and the DB message.
    While deploying the Composite application I am recieving this error. "Component: sun-http-binding
    ERROR: (SOAPBC_START_1) HTTPBC-E00205: Start failed. java.lang.Exception: LifecycleException: PWC3985: Protocol handler initialization failed: java.net.BindException: Already bound: 8080
    Can anyone tell me what this is error is all about ??
    Regards,
    Jai

    This is the Glassfish Server log
    Nov 8, 2008 4:01:16 PM com.sun.enterprise.admin.servermgmt.launch.ASLauncher buildCommand
    INFO:
    C:/Program Files/Java/jdk1.6.0_06\bin\java
    -Dcom.sun.aas.instanceRoot=C:/Program Files/glassfish-v2ur2/domains/domain1
    -Dcom.sun.aas.ClassPathPrefix=
    -Dcom.sun.aas.ClassPathSuffix=
    -Dcom.sun.aas.ServerClassPath=
    -Dcom.sun.aas.classloader.appserverChainJars.ee=
    -Dcom.sun.aas.classloader.appserverChainJars=admin-cli.jar,admin-cli-ee.jar,j2ee-svc.jar
    -Dcom.sun.aas.classloader.excludesList=admin-cli.jar,appserv-upgrade.jar,sun-appserv-ant.jar
    -Dcom.sun.aas.classloader.optionalOverrideableChain.ee=
    -Dcom.sun.aas.classloader.optionalOverrideableChain=webservices-rt.jar,webservices-tools.jar
    -Dcom.sun.aas.classloader.serverClassPath.ee=/lib/hadbjdbc4.jar,C:/Program Files/glassfish-v2ur2/lib/SUNWjdmk/5.1/lib/jdmkrt.jar,/lib/dbstate.jar,/lib/hadbm.jar,/lib/hadbmgt.jar,C:/Program Files/glassfish-v2ur2/lib/SUNWmfwk/lib/mfwk_instrum_tk.jar
    -Dcom.sun.aas.classloader.serverClassPath=C:/Program Files/glassfish-v2ur2/lib/install/applications/jmsra/imqjmsra.jar,C:/Program Files/glassfish-v2ur2/imq/lib/jaxm-api.jar,C:/Program Files/glassfish-v2ur2/imq/lib/fscontext.jar,C:/Program Files/glassfish-v2ur2/imq/lib/imqbroker.jar,C:/Program Files/glassfish-v2ur2/imq/lib/imqjmx.jar,C:/Program Files/glassfish-v2ur2/lib/ant/lib/ant.jar,C:/Program Files/glassfish-v2ur2/lib/SUNWjdmk/5.1/lib/jdmkrt.jar
    -Dcom.sun.aas.classloader.sharedChainJars.ee=appserv-se.jar,appserv-ee.jar,jesmf-plugin.jar,/lib/dbstate.jar,/lib/hadbjdbc4.jar,jgroups-all.jar,C:/Program Files/glassfish-v2ur2/lib/SUNWmfwk/lib/mfwk_instrum_tk.jar
    -Dcom.sun.aas.classloader.sharedChainJars=javaee.jar,C:/Program Files/Java/jdk1.6.0_06/lib/tools.jar,install/applications/jmsra/imqjmsra.jar,com-sun-commons-launcher.jar,com-sun-commons-logging.jar,C:/Program Files/glassfish-v2ur2/imq/lib/jaxm-api.jar,C:/Program Files/glassfish-v2ur2/imq/lib/fscontext.jar,C:/Program Files/glassfish-v2ur2/imq/lib/imqbroker.jar,C:/Program Files/glassfish-v2ur2/imq/lib/imqjmx.jar,C:/Program Files/glassfish-v2ur2/imq/lib/imqxm.jar,webservices-rt.jar,webservices-tools.jar,mail.jar,appserv-jstl.jar,jmxremote_optional.jar,C:/Program Files/glassfish-v2ur2/lib/SUNWjdmk/5.1/lib/jdmkrt.jar,activation.jar,appserv-rt.jar,appserv-admin.jar,appserv-cmp.jar,C:/Program Files/glassfish-v2ur2/updatecenter/lib/updatecenter.jar,C:/Program Files/glassfish-v2ur2/jbi/lib/jbi.jar,C:/Program Files/glassfish-v2ur2/imq/lib/imqjmx.jar,C:/Program Files/glassfish-v2ur2/lib/ant/lib/ant.jar,dbschema.jar
    -Dcom.sun.aas.configName=server-config
    -Dcom.sun.aas.configRoot=C:/Program Files/glassfish-v2ur2/config
    -Dcom.sun.aas.defaultLogFile=C:/Program Files/glassfish-v2ur2/domains/domain1/logs/server.log
    -Dcom.sun.aas.domainName=domain1
    -Dcom.sun.aas.installRoot=C:/Program Files/glassfish-v2ur2
    -Dcom.sun.aas.instanceName=server
    -Dcom.sun.aas.processLauncher=SE
    -Dcom.sun.aas.promptForIdentity=true
    -Dcom.sun.enterprise.config.config_environment_factory_class=com.sun.enterprise.config.serverbeans.AppserverConfigEnvironmentFactory
    -Dcom.sun.enterprise.overrideablejavaxpackages=javax.help,javax.portlet
    -Dcom.sun.enterprise.taglibs=appserv-jstl.jar,jsf-impl.jar
    -Dcom.sun.enterprise.taglisteners=jsf-impl.jar
    -Dcom.sun.updatecenter.home=C:/Program Files/glassfish-v2ur2/updatecenter
    -Ddomain.name=domain1
    -Dhttp.nonProxyHosts=localhost|127.0.0.1|jnambiar2
    -Dhttp.proxyHost=web-proxy.atl.hp.com
    -Dhttp.proxyPort=8088
    -Dhttps.proxyHost=web-proxy.atl.hp.com
    -Dhttps.proxyPort=8088
    -Djava.endorsed.dirs=C:/Program Files/glassfish-v2ur2/lib/endorsed
    -Djava.ext.dirs=C:/Program Files/Java/jdk1.6.0_06/lib/ext;C:/Program Files/Java/jdk1.6.0_06/jre/lib/ext;C:/Program Files/glassfish-v2ur2/domains/domain1/lib/ext;C:/Program Files/glassfish-v2ur2/javadb/lib
    -Djava.library.path=C:\Program Files\glassfish-v2ur2\lib;C:\Program Files\glassfish-v2ur2\lib;C:\Program Files\glassfish-v2ur2\bin;C:\Program Files\glassfish-v2ur2\lib
    -Djava.security.auth.login.config=C:/Program Files/glassfish-v2ur2/domains/domain1/config/login.conf
    -Djava.security.policy=C:/Program Files/glassfish-v2ur2/domains/domain1/config/server.policy
    -Djava.util.logging.manager=com.sun.enterprise.server.logging.ServerLogManager
    -Djavax.management.builder.initial=com.sun.enterprise.admin.server.core.jmx.AppServerMBeanServerBuilder
    -Djavax.net.ssl.keyStore=C:/Program Files/glassfish-v2ur2/domains/domain1/config/keystore.jks
    -Djavax.net.ssl.trustStore=C:/Program Files/glassfish-v2ur2/domains/domain1/config/cacerts.jks
    -Djdbc.drivers=org.apache.derby.jdbc.ClientDriver
    -Djmx.invoke.getters=true
    -Dsun.rmi.dgc.client.gcInterval=3600000
    -Dsun.rmi.dgc.server.gcInterval=3600000
    -client
    -XX:+UnlockDiagnosticVMOptions
    -XX:MaxPermSize=192m
    -Xmx512m
    -XX:NewRatio=2
    -XX:+LogVMOutput
    -XX:LogFile=C:/Program Files/glassfish-v2ur2/domains/domain1/logs/jvm.log
    -cp
    C:/Program Files/glassfish-v2ur2/lib/jhall.jar;C:\Program Files\glassfish-v2ur2\lib\appserv-launch.jar
    com.sun.enterprise.server.PELaunch
    start
    Starting Sun Java System Application Server 9.1_02 (build b04-fcs) ...
    MBeanServer started: com.sun.enterprise.interceptor.DynamicInterceptor
    CORE5098: AS Socket Service Initialization has been completed.
    CORE5076: Using [Java HotSpot(TM) Client VM, Version 1.6.0_06] from [Sun Microsystems Inc.]
    SEC1002: Security Manager is OFF.
    C:/Program Files/glassfish-v2ur2/domains/domain1/config/.__com_sun_appserv_pid
    ADM0001:SunoneInterceptor is now enabled
    SEC1143: Loading policy provider com.sun.enterprise.security.provider.PolicyWrapper.
    WEB0114: SSO is disabled in virtual server [server]
    WEB0114: SSO is disabled in virtual server [__asadmin]
    ADM1079: Initialization of AMX MBeans started
    ADM1504: Here is the JMXServiceURL for the Standard JMXConnectorServer: [service:jmx:rmi:///jndi/rmi://jnambiar2.asiapacific.hpqcorp.net:8686/jmxrmi]. This is where the remote administrative clients should connect using the standard JMX connectors
    ADM1506: Status of Standard JMX Connector: Active = [true]
    JBIFW0010: JBI framework ready to accept requests.
    WEB0302: Starting Sun-Java-System/Application-Server.
    WEB0712: Starting Sun-Java-System/Application-Server HTTP/1.1 on 8080
    WEB0712: Starting Sun-Java-System/Application-Server HTTP/1.1 on 8181
    WEB0712: Starting Sun-Java-System/Application-Server HTTP/1.1 on 4848
    SMGT0007: Self Management Rules service is enabled
    Application server startup complete.
    Registered Status Provider MBean for sun-jdbc-binding.
    Registered Status Provider MBean for sun-sql-engine.
    JBISE6013: JavaEEServiceEngine : Java EE Service Engine started successfully.
    JBIFW1146: Engine sun-javaee-engine has been started.
    Registered runtime configuration MBean for sun-jdbc-binding.
    Registered runtime configuration MBean for sun-sql-engine.
    HTTPBC-R00100: sun-http-binding starting
    FILBC-LCY0006: Component sun-file-binding started (outbound).
    FILBC-LCY0005: Component sun-file-binding started (inbound).
    Started outbound.
    SQLSE started.
    JBIFW1146: Engine sun-sql-engine has been started.
    Started outbound receiver.
    Receiver started.
    Receiver started.
    FILBC-LCY0003: Component sun-file-binding started with the following configuration:
    specification-version: 1.0
    build-number: 080408_1
    Threads: 10
    JBIFW1146: Binding sun-file-binding has been started.
    Started inbound receiver.
    JDBC Binding component started.
    JBIFW1146: Binding sun-jdbc-binding has been started.
    PWC3982: Cannot register MBean for the Protocol
    grizzlyHttpProtocol.selectorRegisterProtocol
    WEB0712: Starting Sun-Java-System/Application-Server HTTP/1.1 on 9080
    XSLTSE-5001:Initialized XSLT service engine successfully!
    XSLTSE-5002:Started XSLT service engine successfully!
    JBIFW1146: Engine sun-xslt-engine has been started.
    HTTPBC-E00153: Failed to read the descriptor file for identity information; descriptor file is 'C:\Program Files\glassfish-v2ur2\domains\domain1\jbi\components\sun-http-binding\install_root/META-INF/jbi.xml'
    java.net.MalformedURLException: unknown protocol: c
    at java.net.URL.<init>(URL.java:574)
    at java.net.URL.<init>(URL.java:464)
    at java.net.URL.<init>(URL.java:413)
    at com.sun.org.apache.xerces.internal.impl.XMLEntityManager.setupCurrentEntity(XMLEntityManager.java:650)
    at com.sun.org.apache.xerces.internal.impl.XMLVersionDetector.determineDocVersion(XMLVersionDetector.java:186)
    at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:771)
    at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:737)
    at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:107)
    at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse(DOMParser.java:225)
    at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:283)
    at javax.xml.parsers.DocumentBuilder.parse(DocumentBuilder.java:180)
    at com.sun.jbi.httpsoapbc.HttpSoapBindingLifeCycle.identity(HttpSoapBindingLifeCycle.java:1103)
    at com.sun.jbi.httpsoapbc.HttpSoapBindingLifeCycle.logComponentInfo(HttpSoapBindingLifeCycle.java:1075)
    at com.sun.jbi.httpsoapbc.HttpSoapBindingLifeCycle.start(HttpSoapBindingLifeCycle.java:476)
    at com.sun.jbi.framework.ComponentFramework.startComponent(ComponentFramework.java:1846)
    at com.sun.jbi.framework.ComponentFramework.startComponent(ComponentFramework.java:1792)
    at com.sun.jbi.framework.ComponentOperation.process(ComponentOperation.java:233)
    at com.sun.jbi.framework.Operation.run(Operation.java:104)
    at java.lang.Thread.run(Thread.java:619)
    HTTPBC-R00101: sun-http-binding started with the following configuration:
    specification-version: unknown
    build-number: unknown
    OutboundThreads (max outbound threads): 10
    HttpDefaultPort: 9080
    HttpsDefaultPort: 9181
    AMConfigDir:
    ProxyType: DIRECT
    ProxyHost:
    ProxyPort: 0
    NonProxyHosts: localhost|127.0.0.1
    ProxyUserName:
    UseJVMProxySettings: false
    ApplicationVariables: {  }
    ApplicationConfigurations: {  }
    JBIFW1146: Binding sun-http-binding has been started.
    EJBSCLookup:: sc.getEjbContainerAvailabilityEnabledFromConfig() ==> false
    JTS5014: Recoverable JTS instance, serverId = [3700]
    About to load the system app: MEjbApp
    POARemoteRefFactory checking if SFSBVersionPolicy need to be added
    EJBSCLookup:: sc.getEjbContainerAvailabilityEnabledFromConfig() ==> false
    POARemoteRefFactory addSFSBVersionPolicy? false
    POARemoteRefFactory checking if SFSBVersionPolicy need to be added
    EJBSCLookup:: sc.getEjbContainerAvailabilityEnabledFromConfig() ==> false
    POARemoteRefFactory addSFSBVersionPolicy? false
    LDR5010: All ejb(s) of [MEjbApp] loaded successfully!
    About to load the system app: __ejb_container_timer_app
    EJB5109:EJB Timer Service started successfully for datasource [jdbc/__TimerPool]
    LDR5010: All ejb(s) of [__ejb_container_timer_app] loaded successfully!
    BPJBI-5001:BPEL service engine initialized
    BPJBI-5002:Starting BPEL service engine
    BPELSEInOutThread.Started_BPEL_service_engine_in-out_thread
    BPELSEInOutThread.Started_BPEL_service_engine_in-out_thread
    BPELSEInOutThread.Started_BPEL_service_engine_in-out_thread
    BPELSEInOutThread.Started_BPEL_service_engine_in-out_thread
    BPELSEInOutThread.Started_BPEL_service_engine_in-out_thread
    BPELSEInOutThread.Started_BPEL_service_engine_in-out_thread
    I18N:
    BPJBI-5003: BPEL service engine started with following configurations:
    Persistence Enabled : false
    Monitor Enabled : false
    Persistence Database NonXA JNDI ResourceName : jdbc/bpelseNonXA
    Persistence Database XA JNDI Resource Name : jdbc/bpelseXA
    Engine Expiry Interval (failover setting) : 60 seconds
    Debug Enabled : false
    Debug Port : 3,343
    Thread Count 10
    Engine Installed on Application Server Cluster : false
    BPELSEInOutThread.Started_BPEL_service_engine_in-out_thread
    BPELSEInOutThread.Started_BPEL_service_engine_in-out_thread
    BPELSEInOutThread.Started_BPEL_service_engine_in-out_thread
    BPELSEInOutThread.Started_BPEL_service_engine_in-out_thread
    JBIFW1146: Engine sun-bpel-engine has been started.
    JBIMA0452: Successfully processed 0 Service Assemblies during startup.
    JBIFW0012: JBI framework startup complete.
    javax.management.InstanceNotFoundException: No object matches the specified name "server.security-service.message-security-config.SOAP.provider-config.XWS_ClientProvider.property.signature.key.alias"
    javax.management.InstanceNotFoundException: No object matches the specified name "domain.applications.lifecycle-module.JBIFramework.property.com.sun.jbi.home"
    javax.management.InstanceNotFoundException: No object matches the specified name "server.security-service.message-security-config.SOAP.provider-config.XWS_ServerProvider.property.encryption.key.alias"
    javax.management.InstanceNotFoundException: No object matches the specified name "server.security-service.message-security-config.SOAP.provider-config.ClientProvider.property.security.config"
    javax.management.InstanceNotFoundException: No object matches the specified name "server.security-service.message-security-config.SOAP.provider-config.ClientProvider.property.encryption.key.alias"
    javax.management.InstanceNotFoundException: No object matches the specified name "server.security-service.message-security-config.SOAP.provider-config.ServerProvider.property.security.config"
    javax.management.InstanceNotFoundException: No object matches the specified name "server.applications.lifecycle-module.JBIFramework.property.com.sun.jbi.home"
    javax.management.InstanceNotFoundException: No object matches the specified name "server.security-service.message-security-config.SOAP.provider-config.ClientProvider.property.dynamic.username.password"
    javax.management.InstanceNotFoundException: No object matches the specified name "server.security-service.message-security-config.SOAP.provider-config.ServerProvider.property.signature.key.alias"
    javax.management.InstanceNotFoundException: No object matches the specified name "server.security-service.message-security-config.SOAP.provider-config.XWS_ClientProvider.property.dynamic.username.password"
    javax.management.InstanceNotFoundException: No object matches the specified name "server.security-service.message-security-config.SOAP.provider-config.XWS_ClientProvider.property.encryption.key.alias"
    javax.management.InstanceNotFoundException: No object matches the specified name "server.security-service.message-security-config.SOAP.provider-config.ClientProvider.property.signature.key.alias"
    javax.management.InstanceNotFoundException: No object matches the specified name "server.security-service.message-security-config.SOAP.provider-config.ServerProvider.property.encryption.key.alias"
    javax.management.InstanceNotFoundException: No object matches the specified name "server.security-service.message-security-config.SOAP.provider-config.XWS_ServerProvider.property.signature.key.alias"
    wsgen successful
    DPL5306:EJB Web Service Endpoint [HPAdaptorWS] listening at address [http://jnambiar2.asiapacific.hpqcorp.net:8080/HPAdaptorWSDLService/HPAdaptorWS]
    deployed with moduleid = HPAdaptorWSEJB
    Container com.sun.enterprise.webservice.JAXWSContainer@1fae7b1 doesn't support class com.sun.xml.ws.api.server.Module
    LDR5010: All ejb(s) of [HPAdaptorWSEJB] loaded successfully!
    The log message is null.
    javax.ejb.EJBException
    at com.sun.ejb.containers.BaseContainer.processSystemException(BaseContainer.java:3869)
    at com.sun.ejb.containers.BaseContainer.completeNewTx(BaseContainer.java:3769)
    at com.sun.ejb.containers.BaseContainer.postInvokeTx(BaseContainer.java:3571)
    at com.sun.ejb.containers.WebServiceInvocationHandler.invoke(WebServiceInvocationHandler.java:200)
    at $Proxy62.hpAdaptorWSDLOperation(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.sun.enterprise.webservice.InvokerImpl.invoke(InvokerImpl.java:81)
    at com.sun.enterprise.webservice.EjbInvokerImpl.invoke(EjbInvokerImpl.java:82)
    at com.sun.xml.ws.server.InvokerTube$2.invoke(InvokerTube.java:146)
    at com.sun.xml.ws.server.sei.EndpointMethodHandler.invoke(EndpointMethodHandler.java:257)
    at com.sun.xml.ws.server.sei.SEIInvokerTube.processRequest(SEIInvokerTube.java:93)
    at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:595)
    at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:554)
    at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:539)
    at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:436)
    at com.sun.xml.ws.api.pipe.helper.AbstractTubeImpl.process(AbstractTubeImpl.java:106)
    at com.sun.enterprise.webservice.MonitoringPipe.process(MonitoringPipe.java:147)
    at com.sun.xml.ws.api.pipe.helper.PipeAdapter.processRequest(PipeAdapter.java:115)
    at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:595)
    at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:554)
    at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:539)
    at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:436)
    at com.sun.xml.ws.api.pipe.helper.AbstractTubeImpl.process(AbstractTubeImpl.java:106)
    at com.sun.enterprise.webservice.CommonServerSecurityPipe.processRequest(CommonServerSecurityPipe.java:218)
    at com.sun.enterprise.webservice.CommonServerSecurityPipe.process(CommonServerSecurityPipe.java:129)
    at com.sun.xml.ws.api.pipe.helper.PipeAdapter.processRequest(PipeAdapter.java:115)
    at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:595)
    at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:554)
    at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:539)
    at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:436)
    at com.sun.xml.ws.server.WSEndpointImpl$2.process(WSEndpointImpl.java:243)
    at com.sun.xml.ws.transport.http.HttpAdapter$HttpToolkit.handle(HttpAdapter.java:444)
    at com.sun.xml.ws.transport.http.HttpAdapter.handle(HttpAdapter.java:244)
    at com.sun.xml.ws.transport.http.servlet.ServletAdapter.handle(ServletAdapter.java:135)
    at com.sun.enterprise.webservice.Ejb3MessageDispatcher.handlePost(Ejb3MessageDispatcher.java:113)
    at com.sun.enterprise.webservice.Ejb3MessageDispatcher.invoke(Ejb3MessageDispatcher.java:87)
    at com.sun.enterprise.webservice.EjbWebServiceServlet.dispatchToEjbEndpoint(EjbWebServiceServlet.java:226)
    at com.sun.enterprise.webservice.EjbWebServiceServlet.service(EjbWebServiceServlet.java:155)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:831)
    at com.sun.enterprise.web.AdHocContextValve.invoke(AdHocContextValve.java:114)
    at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
    at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571)
    at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:87)
    at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:206)
    at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
    at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571)
    at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1080)
    at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:150)
    at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
    at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571)
    at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1080)
    at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:272)
    at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.invokeAdapter(DefaultProcessorTask.java:637)
    at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.doProcess(DefaultProcessorTask.java:568)
    at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.process(DefaultProcessorTask.java:813)
    at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.executeProcessorTask(DefaultReadTask.java:341)
    at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:263)
    at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:214)
    at com.sun.enterprise.web.portunif.PortUnificationPipeline$PUTask.doTask(PortUnificationPipeline.java:380)
    at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:265)
    at com.sun.enterprise.web.connector.grizzly.ssl.SSLWorkerThread.run(SSLWorkerThread.java:106)
    Caused by: java.lang.UnsupportedOperationException: Message Recieved Successfully
    at hp.adaptor.gateway.HPAdaptorWS.hpAdaptorWSDLOperation(HPAdaptorWS.java:22)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.sun.enterprise.security.application.EJBSecurityManager.runMethod(EJBSecurityManager.java:1067)
    at com.sun.enterprise.security.SecurityUtil.invoke(SecurityUtil.java:176)
    at com.sun.ejb.containers.BaseContainer.invokeTargetBeanMethod(BaseContainer.java:2895)
    at com.sun.ejb.containers.BaseContainer.intercept(BaseContainer.java:3986)
    at com.sun.ejb.containers.WebServiceInvocationHandler.invoke(WebServiceInvocationHandler.java:189)
    ... 63 more
    EJB5018: An exception was thrown during an ejb invocation on [HPAdaptorWS]
    javax.ejb.EJBException
    at com.sun.ejb.containers.BaseContainer.processSystemException(BaseContainer.java:3869)
    at com.sun.ejb.containers.BaseContainer.completeNewTx(BaseContainer.java:3769)
    at com.sun.ejb.containers.BaseContainer.postInvokeTx(BaseContainer.java:3571)
    at com.sun.ejb.containers.WebServiceInvocationHandler.invoke(WebServiceInvocationHandler.java:200)
    at $Proxy62.hpAdaptorWSDLOperation(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.sun.enterprise.webservice.InvokerImpl.invoke(InvokerImpl.java:81)
    at com.sun.enterprise.webservice.EjbInvokerImpl.invoke(EjbInvokerImpl.java:82)
    at com.sun.xml.ws.server.InvokerTube$2.invoke(InvokerTube.java:146)
    at com.sun.xml.ws.server.sei.EndpointMethodHandler.invoke(EndpointMethodHandler.java:257)
    at com.sun.xml.ws.server.sei.SEIInvokerTube.processRequest(SEIInvokerTube.java:93)
    at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:595)
    at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:554)
    at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:539)
    at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:436)
    at com.sun.xml.ws.api.pipe.helper.AbstractTubeImpl.process(AbstractTubeImpl.java:106)
    at com.sun.enterprise.webservice.MonitoringPipe.process(MonitoringPipe.java:147)
    at com.sun.xml.ws.api.pipe.helper.PipeAdapter.processRequest(PipeAdapter.java:115)
    at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:595)
    at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:554)
    at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:539)
    at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:436)
    at com.sun.xml.ws.api.pipe.helper.AbstractTubeImpl.process(AbstractTubeImpl.java:106)
    at com.sun.enterprise.webservice.CommonServerSecurityPipe.processRequest(CommonServerSecurityPipe.java:218)
    at com.sun.enterprise.webservice.CommonServerSecurityPipe.process(CommonServerSecurityPipe.java:129)
    at com.sun.xml.ws.api.pipe.helper.PipeAdapter.processRequest(PipeAdapter.java:115)
    at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:595)
    at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:554)
    at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:539)
    at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:436)
    at com.sun.xml.ws.server.WSEndpointImpl$2.process(WSEndpointImpl.java:243)
    at com.sun.xml.ws.transport.http.HttpAdapter$HttpToolkit.handle(HttpAdapter.java:444)
    at com.sun.xml.ws.transport.http.HttpAdapter.handle(HttpAdapter.java:244)
    at com.sun.xml.ws.transport.http.servlet.ServletAdapter.handle(ServletAdapter.java:135)
    at com.sun.enterprise.webservice.Ejb3MessageDispatcher.handlePost(Ejb3MessageDispatcher.java:113)
    at com.sun.enterprise.webservice.Ejb3MessageDispatcher.invoke(Ejb3MessageDispatcher.java:87)
    at com.sun.enterprise.webservice.EjbWebServiceServlet.dispatchToEjbEndpoint(EjbWebServiceServlet.java:226)
    at com.sun.enterprise.webservice.EjbWebServiceServlet.service(EjbWebServiceServlet.java:155)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:831)
    at com.sun.enterprise.web.AdHocContextValve.invoke(AdHocContextValve.java:114)
    at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
    at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571)
    at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:87)
    at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:206)
    at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
    at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571)
    at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1080)
    at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:150)
    at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
    at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571)
    at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1080)
    at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:272)
    at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.invokeAdapter(DefaultProcessorTask.java:637)
    at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.doProcess(DefaultProcessorTask.java:568)
    at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.process(DefaultProcessorTask.java:813)
    at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.executeProcessorTask(DefaultReadTask.java:341)
    at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:263)
    at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:214)
    at com.sun.enterprise.web.portunif.PortUnificationPipeline$PUTask.doTask(PortUnificationPipeline.java:380)
    at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:265)
    at com.sun.enterprise.web.connector.grizzly.ssl.SSLWorkerThread.run(SSLWorkerThread.java:106)
    Caused by: java.lang.UnsupportedOperationException: Message Recieved Successfully
    at hp.adaptor.gateway.HPAdaptorWS.hpAdaptorWSDLOperation(HPAdaptorWS.java:22)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.sun.enterprise.security.application.EJBSecurityManager.runMethod(EJBSecurityManager.java:1067)
    at com.sun.enterprise.security.SecurityUtil.invoke(SecurityUtil.java:176)
    at com.sun.ejb.containers.BaseContainer.invokeTargetBeanMethod(BaseContainer.java:2895)
    at com.sun.ejb.containers.BaseContainer.intercept(BaseContainer.java:3986)
    at com.sun.ejb.containers.WebServiceInvocationHandler.invoke(WebServiceInvocationHandler.java:189)
    ... 63 more
    Deploying service assembly HPAdapatorInboundCAwithFault to target server.
    Cannot find CatalogManager.properties
    Retrieving document at 'C:\Program Files\glassfish-v2ur2\domains\domain1\jbi\service-assemblies\HPAdapatorInboundCAwithFault\HPAdapatorInboundCAwithFault-sun-file-binding\sun-file-binding\HPAdaptorInboundBPEL\DBMessageFile.wsdl'.
    Retrieving document at 'C:\Program Files\glassfish-v2ur2\domains\domain1\jbi\service-assemblies\HPAdapatorInboundCAwithFault\HPAdapatorInboundCAwithFault-sun-file-binding\sun-file-binding\HPAdaptorInboundBPEL\MsgInbound_DB.wsdl'.
    Retrieving document at 'C:\Program Files\glassfish-v2ur2\domains\domain1\jbi\service-assemblies\HPAdapatorInboundCAwithFault\HPAdapatorInboundCAwithFault-sun-file-binding\sun-file-binding\HPAdaptorInboundBPEL\Partners\HPAdaptorWSDLService\HPAdaptorWS.wsdl'.
    Retrieving document at 'C:\Program Files\glassfish-v2ur2\domains\domain1\jbi\service-assemblies\HPAdapatorInboundCA

  • Error in deploying the Quiz Application

    hi
    i made the quiz application refering the Sample application given in sdn .
    when i deployed it in the WAS 6.4 server , the application was deployed successfully and ran without any issue
    however , when i deployed it in WAS 7.0 server , deployment was aborted and i faced the following error
    *Jun 30, 2008 2:23:53 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:*
    *[023]Deployment aborted*
    *Settings*
    *SDM host : cgnsap29*
    *SDM port : 50118*
    *URL to deploy : file:/C:/DOCUME~1/ss72883/Local Settings/Temp/temp5563WebDynpro_Quiz.ear*
    *Result*
    *=> deployment aborted : file:/C:/DOCUME~1/ss72883/Local Settings/Temp/temp5563WebDynpro_Quiz.ear*
    *Aborted: development component 'WebDynpro_Quiz'/'local'/'LOKAL'/'0.2008.06.30.14.22.43'/'0':*
    *Caught exception during application deployment from SAP J2EE Engine's deploy service:*
    *java.rmi.RemoteException: Cannot deploy application local/WebDynpro_Quiz.. Reason: Clusterwide exception: Failed to deploy application local/WebDynpro_Quiz. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?; nested exception is:      com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application local/WebDynpro_Quiz. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?*
    *(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)*
    *Deployment exception : The deployment of at least one item aborted*
    the additional information about the deployment
    *Jun 30, 2008 2:23:54 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] INFO:*
    *[023]Additional log information about the deployment*
    *<!LOGHEADER[START]/>*
    *<!HELP[Manual modification of the header may cause parsing problem!]/>*
    *<!LOGGINGVERSION[1.5.3.7185 - 630]/>*
    *<!NAME[F:\usr\sap\EC2\DVEBMGS01\SDM\program\log\sdmcl20080630085256.log]/>*
    *<!PATTERN[sdmcl20080630085256.log]/>*
    *<!FORMATTER[com.sap.tc.logging.TraceFormatter(%24d %s: %m)]/>*
    *<!ENCODING[UTF8]/>*
    *<!LOGHEADER[END]/>*
    *Jun 30, 2008 2:22:57 PM  Info: - Starting deployment -*
    *Jun 30, 2008 2:22:57 PM  Info: Error handling strategy: OnErrorStop*
    *Jun 30, 2008 2:22:57 PM  Info: Prerequisite error handling strategy: OnPrerequisiteErrorStop*
    *Jun 30, 2008 2:22:57 PM  Info: Update strategy: UpdateAllVersions*
    *Jun 30, 2008 2:22:57 PM  Info: Starting deployment prerequisites:*
    *Jun 30, 2008 2:23:14 PM  Info: Loading selected archives...*
    *Jun 30, 2008 2:23:14 PM  Info: Loading archive 'F:\usr\sap\EC2\DVEBMGS01\SDM\program\temp\temp5563WebDynpro_Quiz.ear'*
    *Jun 30, 2008 2:23:21 PM  Info: Selected archives successfully loaded.*
    *Jun 30, 2008 2:23:21 PM  Info: Actions per selected component:*
    *Jun 30, 2008 2:23:21 PM  Info: Update: Selected development component 'WebDynpro_Quiz'/'local'/'LOKAL'/'0.2008.06.30.14.22.43'/'0' updates currently deployed development component 'WebDynpro_Quiz'/'local'/'LOKAL'/'0.2007.08.13.16.02.48'/'0'.*
    *Jun 30, 2008 2:23:21 PM  Info: Ending deployment prerequisites. All items are correct.*
    *Jun 30, 2008 2:23:22 PM  Info: Saved current Engine state.*
    *Jun 30, 2008 2:23:22 PM  Info: Starting: Update: Selected development component 'WebDynpro_Quiz'/'local'/'LOKAL'/'0.2008.06.30.14.22.43'/'0' updates currently deployed development component 'WebDynpro_Quiz'/'local'/'LOKAL'/'0.2007.08.13.16.02.48'/'0'.*
    *Jun 30, 2008 2:23:22 PM  Info: SDA to be deployed: F:\usr\sap\EC2\DVEBMGS01\SDM\root\origin\local\webdynpro_quiz\LOKAL\0\0.2008.06.30.14.22.43\temp5563WebDynpro_Quiz.ear*
    *Jun 30, 2008 2:23:22 PM  Info: Software type of SDA: J2EE*
    **Jun 30, 2008 2:23:22 PM  Info: ***** Begin of SAP J2EE Engine Deployment (J2EE Application) *******
    *Jun 30, 2008 2:23:47 PM  Info: Begin of log messages of the target system:*
    **08/06/30 14:23:22 -  *************************************************************
    *08/06/30 14:23:26 -  Start updating EAR file...*
    *08/06/30 14:23:26 -  start-up mode is lazy*
    *08/06/30 14:23:26 -  EAR file updated successfully for 172ms.*
    *08/06/30 14:23:26 -  Start updating...*
    *08/06/30 14:23:28 -  EAR file uploaded to server for 500ms.*
    *08/06/30 14:23:47 -  ERROR: Not updated. Deploy Service returned ERROR:*
                         *java.rmi.RemoteException: Cannot deploy application local/WebDynpro_Quiz..*
                         *Reason: Clusterwide exception: Failed to deploy application local/WebDynpro_Quiz. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?; nested exception is:*
                         **     com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application local/WebDynpro_Quiz. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?**
                         **     at com.sap.engine.services.deploy.server.DeployServiceImpl.update(DeployServiceImpl.java:681)**
                         **     at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1278)**
                         **     at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:312)**
                         **     at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:199)**
                         **     at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129)**
                         **     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)**
                         **     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)**
                         **     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)**
                         **     at java.security.AccessController.doPrivileged(Native Method)**
                         **     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)**
                         **     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)**
                         *Caused by: com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application local/WebDynpro_Quiz. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?*
                         **     at com.sap.engine.services.webdynpro.WebDynproContainer.deploy(WebDynproContainer.java:1016)**
                         **     at com.sap.engine.services.webdynpro.WebDynproContainer.makeUpdate(WebDynproContainer.java:1259)**
                         **     at com.sap.engine.services.deploy.server.application.UpdateTransaction.makeComponents(UpdateTransaction.java:400)**
                         **     at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:321)**
                         **     at com.sap.engine.services.deploy.server.application.UpdateTransaction.begin(UpdateTransaction.java:164)**
                         **     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292)**
                         **     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:326)**
                         **     at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:3184)**
                         **     at com.sap.engine.services.deploy.server.DeployServiceImpl.update(DeployServiceImpl.java:669)**
                         **     ... 10 more**
                         *For detailed information see the log file of the Deploy Service.*
    **08/06/30 14:23:47 -  *************************************************************
    *Jun 30, 2008 2:23:47 PM  Info: End of log messages of the target system.*
    **Jun 30, 2008 2:23:47 PM  Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *******
    *Jun 30, 2008 2:23:48 PM  Error: Aborted: development component 'WebDynpro_Quiz'/'local'/'LOKAL'/'0.2008.06.30.14.22.43'/'0':*
    *Caught exception during application deployment from SAP J2EE Engine's deploy service:*
    *java.rmi.RemoteException: Cannot deploy application local/WebDynpro_Quiz..*
    *Reason: Clusterwide exception: Failed to deploy application local/WebDynpro_Quiz. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?; nested exception is:*
    **     com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application local/WebDynpro_Quiz. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?**
    *(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)*
    *Jun 30, 2008 2:23:48 PM  Info: Starting to save the repository*
    *Jun 30, 2008 2:23:49 PM  Info: Finished saving the repository*
    *Jun 30, 2008 2:23:49 PM  Info: J2EE Engine is in same state (online/offline) as it has been before this deployment process.*
    *Jun 30, 2008 2:23:49 PM  Error: - At least one of the Deployments failed -*
    please site me the reason
    thanks and regards
    Viswas

    Hi,
    Is this DC, if so check that all used DCs are deployed.
    One more reason of this exception is when there is name conflict between two projects deployed on the same server , eg say projects A & B have same application name, component name.
    When I get this exception, I go to nwa, see logs to find out two conflicting projects and rename one of them and deploy again. It solves my problem.
    from Re: deployment getting aborted
    regards,
    Pradeep

  • Error while running the portal application

    Hi All,
    I have made one sample portal application in Sun Java Studio Enterprise 8.When I build this application it is successfully build.Now when I start the server of Sun Java Studio Enterprise 8 and try to run the project ,the browser opens and gives the following error::
    HTTP Status 404 - /portlet/
    type Status report
    message /portlet/
    description The requested resource (/portlet/) is not available.
    Sun-Java-System/Application-Server
    If anyone having idea about this problem then please let me know.All suggestions are welcome.
    Thanx and Regards,
    Chirag.

    OK, so they are not in the mood for posting on the forum today :-)
    They suggest three things.
    1) Restart the server. Deploying a portlet requires some configuration changes, which will take effect only after the server is restarted. Thus if it failed to restart due to some reason...
    2) Try deleting the JSE userdir and trying again.
    3) If the above two items do not help. Start the studio with the following command:runide.exe -J-Dcom.sun.tools.ide.portletbuilder.log=log,info try the deployment and either post here or email the output which will be output to the console.
    HTH,
    Kirill

Maybe you are looking for

  • How to fetch Excel sheet through File adapter in SAP PI?

    Dear all Can u help me  with this? Regards karan kanotra

  • User Facing Features and Upgrades from 6.x and 7.x (MWI, DND, CFA, ...)

    The 9.1.1 upgrade guide states: "For upgrades from Cisco Unified Communications Manager Release 8.x, changes that are made to the following user-facing features get preserved after the upgrade completes ...". What happens to user facing features like

  • Problem with access to AP 1142

    Hi All, Recently I have connected two AP AIR-LAP1142N-A-K9   to WLC 5508 via switch. I can see both AP on WLC I can ping them but I would like to telnet or ssh to them but this does not work.. I am not fyzicaly at site and I have only remote access t

  • Convert from string to datetime

    I'm getting a date from a textbox in form and i want to insert it into the database....The format of the date i let user key into the textbox is 2003/03/28...But the field of the date in the database is in this format 2003-02-25 00:00:00.000 so when

  • How to pass pushbutton values to a function module

    Hi all, I am required  to move a subroutine in main program to a function module but I am unable to pass in the pushbutton . How do I do that? In main program: SELECTION-SCREEN BEGIN OF BLOCK blk1. PARAMETERS message(10) TYPE c. SELECTION-SCREEN SKIP