System error -no entry in table T093 for the chart of depreciation or ccode

When checking “Depreciation Areas of Company Codes” in overview for experts (transaction SPRO) I first get a warning message “inconsistent rounding entries were corrected”.
After saving once in the maintenance transaction (as recommended in the help text) I get the following system error: “there is no entry in table T093 for the chart of depreciation or company code”. I checked table T093 and all entries are in there!
What else I have to correct?
Regards
Cordula Speh

hi ,
yours is customizing problem only, check all steps once again in customizing. T093 is initial customizing for asset accounting. just go through below things and check based on this order all customizing.
1.     Copy Reference Chart of Accounts Depreciation / Depreciation Areas.
2.     Specify Description of Chart of Depreciation (COD).
3.     Copy / Delete Depreciation Areas.
4.     Creation of  ‘0’ Tax Codes for Non-Taxable Transaction.
5.     Assign Tax Codes for Non-Taxable Transactions.
6.     Assign COD to Company Code.
7.     Specify Account Determination.
8.     Create Screen Layout Rules.
9.     Define Number Intervals.
check one by one and if you find anything missedout do it, i think max you prblm solve, if not give some more details about your problem.
thanks and regards
vk.

Similar Messages

  • No entry in table T510 for the key 4004033MANAGER 1 on 01.04.2008

    Hi,
    When trying to save entry in 0008 infotype i am getting the error "No entry in table T510 for the key 4004033MANAGER 1 on 01.04.2008"
    I had removed the integration PLOGi ORGA for some testing purpose. is it because of this. now i have set the integration switch back. still i am not able to resolve this.
    Can anybody help me in this.
    thanks

    Hi,
    Maintian the table V_t510, go to V_t510, enter the values like
    40- Country Grouping
    04- PS type
    03- PS ARea
    3- CAP(collective agreement Provision) which you have assigned to your employee subgroups in table V_T503Z.
    MANAGER - Ps group
    1 - Ps level
    on 01.04.2008- start date.
    in this table enter the wage type, which you have created under basic pay.
    like
    3 manager 1 1000 01012008 31129999
    3 manager 1 1010 01012008 31129999
    Regards
    Devi

  • Error "No entry in table T589A for P" while creating new Infotype

    HI,
    I've created a new infotype (9605). All the tables, structures, screens etc. have been created using transaction PM01 successfully. But upon execution of Infotype from PA30, the infotype screen is displayed with the following error:
    "No entry in table T589A for P"
    Any input will be highly appreciated.
    Thank you,
    Farooq.

    Hi Farooq,
    Untill and unless the the field PSYST-IOPER is cleared explicitly in the program MP960500 (in PBO modules), this error should not occur.
    Also is this error is coming only for 9605 infotype ? Also is any other info availaible in the error message such as entry in table t589a is not available for which value of OPERA (INS, MOD, DEL, LIS etc) ?
    Regards,
    Shrinivas

  • Payroll error:          No entry in table T549A for key

    Hi whilw running payroll, there is a error
             No entry in table T549A for key
    what could be the possible reason. there are 2 payroll areas one for monthly and the other for semi monthly. this is for semi monthly. monthly is running fine.
    -request help on this

    Hi,
    Go to the perticular table and check whether you have maintained any entries for Payroll area and date modifier for semi monthly period parameter also check whether run payroll bos is checked or not.
    Regards

  • No entry in table T527X for E

    Hi,
    The HR IDOCs are ending in error in our production system with the error:
    No entry in table T527X for E
    Message no. RP301
    Diagnosis
    The entry values must be stored in table T527X. The "   E" value(s) are not in this table.
    When the IDOC is reprocessed manually or by the standard program, the IDOC has OK status.
    The error just started from today and we do not know as to what is causing this error.
    I have checked in the FM that is processing the IDOC and I could not find nay reference to the table T527X or that message number.
    Can anyone please help?
    Regards,
    Archana

    The IDOC is being processed by a custom Function module but this program was modified
    and the changes were moved to the system last week.
    If IDOC was getting processes Successfully till last week, Customization done recently is the Culprit
    I am thinking about the complexity of the Standard Function (which almost processes all
    types of HR master data and how developer must have managed to write Custom code for all of this.
    Quite Complex I think.
    The main change was that in some updation BDC is now used to update the screens
    directly and then PA41 tcode is being called. Do you think this might cause the issue?
    But then it works in reprocessing - strange.
    In some places, the standard function module is used (code not changed for this) -HR_MASTER_MAINTAIN -
    (i think).
    Well what all I can say is track the error message while running the IDOC for first time and
    that will only give you the solution.
    Regards
    Shital

  • No entry in table T512W for key 40 9913

    Dear Guru
    When I am running simulation payroll run, system is throwing this error "No entry in table T512W for key 40 9913".
    9913 is the wage type which is getting updated due to INCS rule.
    In the log, 9913 value is same as value of EDLI Contribution
    /3F7 EDLI contri0101                                                    32.50
    9913            0101                                                    32.50
    I checked 40EPF feature and checked master data in 587, all are correct.Is there something I need to check? Please guide
    Regards
    Vikas K Sharma

    Hi
    I checked the customized WT entry table and there is no 9 series WT at all.
    Recently patches were updated in development. Do I have to check 40EPF features or something. I was reading some reply here but I am not clear how to do such changes.
    Please guide.
    Regards
    Vikas K Sharma

  • Error "No entry in table T551A" while creating set work schedule rule.

    Dear Team,
    I am getting following error while creating set work schedule rule.
    Error "No entry in table T551A" for key 22 BBB [ here BBBB is my period work schedule]
    The actual prob is i configured all the necessary steps but when i tried to create work schedule rule im getting this error. Also, in the same screen there is one field DWS grouping initially value in this is 00 and gread mode. But after giving ES grp, holiday calander ID etc etc when i try to save that screen that value is chainging to 22 from 00.
    My ES grop=2 and PS grop=2 . Is that value is my ES and PS grouping..?? or some other thing.
    Request you to please help me out.
    Regards
    Shab.

    HI, there are 8 steps you need to do below:
    1. Group Personnel Subareas for the Daily Work Schedule
    2. Group Personnel Subareas for the Work Schedule
    3. Define Break Schedules
    4. Define Daily Work Schedules
    5. Define Period Work Schedules
    6. Define Employee Subgroup Groupings
    7. Define Groupings for the Public Holiday Calendar
    8. Set Work Schedule Rules and Work Schedules
    All of them belong to TIME MANAGEMENT. I think you miss some steps above.
    Please check it again.
    Regards!
    Minh

  • No entry in table T001P for key - PT60

    Hi Folks,
    I´ve got the same error people have reported since some time in this forum, but I didn't find a clear reason or way to fix the issue.
    The error "No entry in table T001P for key" is displayed for only 1 employee during time evaluation.I've checked table T001P, IT 0001, IT 0007, and everything seems tom be OK. I have other employee in same Work Schedule and other guy with same information in IT0001, but only this guy has the issue.
    In other thread someone put "Make a blank entry in table and this fixes the issue", but it's not clear in how to do it or why this fixes the issue.
    Thanks for any help.
    (rewarded with points)

    HI,
    Check IT 2006 and IT0001. A valid record must exist in IT 0001 for the last 2006 record. Check BEGDA of IT2006 and review that is greater than BEGDA and lesser than ENDDA of any valid record in IT0001
    If this is not happening, then RPTIME program returns empty values in table T001P and this causes the "no entry in table" message.
    Regards,

  • No entry in table T549Q for key 01 at 20120131

    Hi Experts,
    I am getting this error "No entry in table T549Q for key 01 at 20120131". On running time evaluation.I have generated payroll period frm 1999 to 2020.employee hire date is
    1.1.2012.runnig TE for first month upto 31.1.2012.control record set to correction in 1.1.2012-31.1.2012(11th payroll period of
    2011).this error is not at all going.
    Help is appreciated...
    Thanks in advance

    Hi Sujit,Pradeep,ERP12345
    Issue resolved...
    I have not used period parameter 01.but copied it to my customized one.I changed it to 01 and TE run successfully.
    But my question is why after copying it is throwing this error? i cant find any logic
    sorry I cant give any forum points because its already resolved...
    But anybody can tell the logic then i will definitely give the points.
    Thanks in advance...

  • No entry in table T596F for key RADDSG       on 00000000

    Dear SAP Experts,
    Currently we have created a new personnel area for Singapore. However, when we perform a payroll retroactive run, it hits the below error
    No entry in table T596F for key RADDSG       on 00000000
    I have checked table T596F and the entry for RADDSG being maintained to 31.12.9999. Please advice what could possibly causing this error. Thank you.
    Best Regards,
    Vickee

    No entry in table T596F for key RSDFSG  on 00000000
    Hi Vickee Chong,
    Do you resolved the issue?
    I am facing similar kind issue(No entry in table T596F for key RSDFSG on 00000000) in singapore payroll.
    Please help to provide the solution.
    Thank you.

  • PM01 - Custom Infotype "No entry in table T589A for P"

    I created a custom PA Infotype with PM01 and now get error "No entry in table T589A for P". T589A is a table with function codes e.g. DIS, INS, LIS and also "P" & "Z". T589A is read when the dynamic PF-STATUS processing is done for Infotypes. I'm trying to do an insert with INS, but as the program tries to read from T589A, field PSYST-IOPER is blank. Any advice? Please assist. Thanks, Adrian

    Just had to regenerate

  • No entry in table T512W for key 40 0NPA

    Hi ! all
    i have some problem in payroll processing.
    i have delimited the wage type 0NPA with end date as 26.11.2008. This wage type was a used for EPF calculation. Now there is change in policy with effect from 25.11.2008. This wage type is no longer a part of EPF calculation. So i delimited the same wef from 26.11.2008. Now am trying to process the salary for period 01.04.2009 to 30.04.2009, i am getting an error
    " No entry in table T512W for key 40 0NPA for time 30.04.2009 ".
    This is an indian salary senario.
    Kindly  suggest the solution.
    regards
    Sanjay Petkar

    Hi !  partha
    Thanks for the reply.
    I tried what you said
    in SM30 modified V_512W_D for 0NPA and removed tick from cummulation item 11(EPF)
    and processed the paybill i am till getting the same error.
    I missed to mentioned that, i created the new wage type copy of the 0NPA  as NPBS. As NPA is to be paid to employees but this should not be taken for EPF calculation. so i am using the new code for NPA and discontinue 0NPA.
    Kindly suggest solution to overcome this problem
    Regards
    Sanjay Petkar

  • No Entry in Table T510 when the entry should be pointing to T710?

    Hello Guruu2019s,
    When we process an IT0008 change, we are receiving an error that there is u201CNo Entry in Table T510 for the key 10*###** **** on 2/20/2011u201D.  This is a new entry in PM Compensation Management Job pricing  Pay Structures  Define Pay Grades and levels.
    With that said, I did not set this up originally and I am new in to this area of configuration.  Also, I configured this new entry based on the instructions that were left by the previous co-worker.
    Now, from the research that I have done so far, the configuration that I was instructed to key in uses Table T710 which is why I am receiving the No entry in T510.  From the entire configuration that I have checked in our system, we have never used table T510. So why it is yelling at me now, I cannot figure that out.  I checked the feature TARIF and there is no configuration with any of our employee group/settings, but it is active and the otherwise is calling a program RPCADD00.
    Just a little more history, we have been in the process of implementing Performance Management & Enterprise Compensation Management with consultants.  The consultants are gone, so I am not sure if they turned something on which is forcing this to look at table T510 now or not?
    We are on ECC 6 with EHP4 and any direction would be highly appreciated because I am at a lost here.
    Thanks,
    Mike

    Hi,
    On the IT0008 screen menu bar, go to Edit>Change remuneration type. This will toggle between Salary (T710) and Pay Scale (T510). For your case, you need to keep it as Salary.
    Hope this helps.
    Donnie

  • IndVal of wage type 1BA0: No entry in table T7INA9 for key 40TL101BA0A on 2

    Hi,
    I have configure  allowance grouping,wage type model,Pay scale type,Pay scale Level, employee group,Employee subgroup,Level.After that I hire one employee useing "T-CODE PA40".But same time system has giving following error message :- "IndVal of wage type 1BA0: No entry in table T7INA9 for key 40TL101BA0A on 20070824" so I am unable to update infotype 8.Please give me reply as early as possiable.
    Regards
    Subhedar B.

    table t510
    MANDT MOLGA TRFAR TRFGB TRFKZ TRFGR    TRFST LGART  ENDDA      BEGDA      BETRG
    100   IQ    01    01    1     GRADE 13 1            31.12.9999 01.01.2012              0.00
    100   IQ    01    01    3     GRADE 13 1            31.12.9999 01.01.2012              0.00
    t511
    MANDT    100
    MOLGA    IQ
    LGART    1019
    ENDDA    31.12.9999
    BEGDA    01.01.1992
    ABTYZ       1
    WKTYZ     11
    OPKEN
    ZEINH    030
    KOMBI    2
    BTMIN    0
    BTMAX    0
    ADSUM    X
    MODNA    TARIF
    MODSP
    RUTYP
    RUDIV    0
    ADDJN
    MOD01    1
    MOD02
    MOD03    A
    ANMIN    0.00
    ANMAX    0.00
    V_511_B
    Wage Type       1019 Bonus Percentage                  01.01.1992 31.12.9999
    EE Subgroup grouping   Personal subarea
    0  1  2  3  4  5  6  7  8  9     0  1  2  3  4  5  6  7  8  9
              1                          1  1

  • No entry in table T556P for key    24000                       at 20130301

    Hi Friends,
    While generating time eveluation i'm getting another issue.
    sytem throwing error as "
    No entry in table T556P for key    24000                       at 20130301
    Person rejected: 00007240"
    Could you please suggest me y system  throwing above error.
    Regards,
    M.Basha.

    Hi,
    Are you using attendance quotas in your solution? Also, are you using a copy of schema TM00?
    If you are not using attendance quotas in your solution, can you comment out the line:
    P2007 TS20  GEN
    Let me know if this is the case or not.
    Thanks and regards,
    Vivek Barnwal

Maybe you are looking for

  • Adding alt text tags in InDesign (and Acrobat Pro)

    I am having real difficulty adding alternative text tags. I created an INDD doc with rollover buttons linked to URLs firstly in InDesign CS4. I couldn't add alt text tags in CS4 so I then tried to add them in Acrobat X Pro but failed. Acrobat keeps w

  • Is there a note app that features encryption, folders, backup, and import/export?

    Hi friends, I have been searching for a month for a Notetaking app for the iphone which has these attributes: able to import/export notes from some form of text file suchas csv. I need to bring over a large number of notes from my android phone. I ca

  • External DVD Drive Problems - Mountain Lion

    hello, I am having problems using external DVD Drives on my 2012 Mac Mini. I have tried using 2 plug and play devices that are stared to work with Macs. The drive powers up but it does not appear anywhere on the mac. essentially it wont mount. the la

  • Dynamic type variable creation

    I want to create a variable with a pre-defined TYPE, but the latter will only be known at runtime. For instance: Consider that I my DEFINITIONS1 include file is: TYPES: BEGIN OF type1,                 field1 TYPE i,                 field2 TYPE i,    

  • How can I clean up my "Other" Storage?!!!

    I have used OmniDiskSweeper, Disk Inventory X, Disk Doctor, etc! It helps clean up storage that I can see but cannot find what is taking up 65GB of Other storage!! PLEASE HELP!