System Error on SIM Change

hi
I have Nokia N73 Music Edition. When i changed my SIM Card am getting "System Error". When using the SIM which i used previously there is no problem. Please give my a solution
Regards
P.Bharathiraja

Oh yes, Navigator is correct. I had forgot the voltage thing. Ask your operator to give you a new SIM with the same number, but I don't think this would be an easy task. I think you are from India, here in Sri Lanka, such SIM changes take both time and money and will cost you a few trips to the network's head office probably too.
Mobile Royale - Latest News, Reviews and Software for Mobiles
Aero Everyday - Aviation News and Insights
GoMobile Forums-The best mobile technology discussions
Please visit http://alifeofmisery.blogspot.com or www.miserylife.tk and help someone smile.
Dreaming of a 5320XpressMusic - 128MB RAM makes up for the 2MP cam !

Similar Messages

  • System Folder errors after I changed all permissions on HD to read & write

    Hi,
    Two things may have caused probs on my new 2010 iMac (Snow Leopard), and Applecare is shut so I would really appreciate some help as I have urgent work.
    1) INCORRECT PERMISSIONS
    I have been stupid. I clicked on Macintosh HD and changed all permissions to read & write because I wanted to be sure I could open and edit all documents on other computers.
    I ran Disk Utility Repair Permissions from the install disc, but I am still getting system error messages, and my HP printer won't work.
    The first message, in Repair Permissions, said: Warning: SUID file System/Library/Cores has been modified and will not be repaired. I have read a support doc on this which says no need to worry but I don't like it and would like to fix this.
    More importantly, my HP printer won't work, displays error beside the document in print dialogue box.
    Deleting the printer and readding it didn't work, so I downloaded new drivers and tried to install them, which is when I got the second system error message: System extension System/Library/Extensions/BJUSBLoad.kext was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for an update.
    I checked the permissions on the file and they were still wrong despite Repair Permissions, allowing everyone to read & write. So I have now clicked on the entire System folder and changed the permissions to: System read & write, admin read only, everyone read only.
    Will this fix it or do I need to do something else, such as check ownership, to make sure all permissions on the computer are now correct?
    2) MEMORY STICK SHUT DOWN MY IMAC
    Additionally (though I don't think this had anything to do with my problems), I inserted a Sandisk USB memory stick the other day and it immediately shut down the computer. When I inserted it into my Macbook it initially rejected it and gave me a message saying the device wanted too much power so it had ejected it to prevent damage to my computer. When I tried again it was OK. I totally reformatted the stick in case there was something harmful on it, but should I now bin the stick as faulty? Scared to use it again.
    3) IS IT BEST TO REINSTALL ENTIRE SOFTWARE?
    If I do a reinstall of all the software from the install disc, will it wipe out all my data, such as Mail, documents, bookmarks and other apps?
    I would back-up, but if I try and back up files on my external drive it will automatically do a Time Machine back-up and I don't want to do that in case it backs-up all the corrupted files. Otherwise, I wouldn't mind starting again just to be sure all is well.
    Expert advice would be very much appreciated.
    Thank you
    Sarah

    Oh, silly really. I was in a hurry and working on docs that I needed to take to the office and open on another computer there.
    But when I checked the permissions on the doc it said I could read & write but everyone else was read only.
    I thought if I opened it on another machine I'd be stuck with read only access and not be able to work on there. I think I couldn't change it, so I thought to avoid any future problems like that I would change everything on machine!
    Yikes. Won't do that again
    Sarah

  • BI  Error Logical system name has been changed for this system

    Hello All,
    I have installed the BI system and did a client copy from 000 to 200 client with profile SAP_ALL.
    Now I have loged into the system with client 200 and wen I run RSA1, I am getting the following error
    message: "Logical system name has been changed for this system"
    Thanks
    Sekhar..

    Hi,
    Goto tcode SCC4.
    Switch to change mode. (System will prompt that this table is cross client. Continue)
    Select your client (in this case 200). Click on details button (next to change mode button)
    Enter the proper logical system name in Logical system field.
    Click on Save button.
    Then try RSA1.
    Hope it helps
    regards,
    Pruthvi R

  • Error "Choose a change request with target system..."

    Hi experts,
    I am trying to change an infosource and keep getting this error "Choose a change request with target system BWQ"
    How do I correct this?
    Thanks!

    Hi,
    Check out source system Id's are properly assigned or not.
    go to tools ( CtrlShiftF11)
    assign point if it helps
    Regards,
    sandeep

  • Change Own Data - System error: query could not be found

    Hi Experts,
    Please help me on the above issue.
    Change Own data is not working in QA environment. Configuration changes related to Change own data does not prompt for a transport request. I have trasnsported T77WWW_WHO entries to QA.
    Here is the table entry.
    08     /SAPQUERY/HR_XX_PA_ESS     Y ESS_WHOS_WHO GB     SY000000000142     SY000000000143
    I dont have any clue about this issue. No ST22 dump is also generated.
    Thanks in advance.
    Cheers
    Jay

    Critical Error
    A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
    Please contact your system administrator.
    System error: query could not be found   
      System error: query could not be found:com.sap.pcuigp.xssfpm.java.FPMRuntimeException: System error: query could not be found
         at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:112)
         at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:122)
         at com.sap.xss.hr.cod.FcCodBusinessLogicComp.callRFCGetDetails(FcCodBusinessLogicComp.java:480)
         at com.sap.xss.hr.cod.FcCodBusinessLogicComp.onInit(FcCodBusinessLogicComp.java:228)
         at com.sap.xss.hr.cod.wdp.InternalFcCodBusinessLogicComp.onInit(InternalFcCodBusinessLogicComp.java:512)
         at com.sap.xss.hr.cod.FcCodBusinessLogicCompInterface.onInit(FcCodBusinessLogicCompInterface.java:115)
         at com.sap.xss.hr.cod.wdp.InternalFcCodBusinessLogicCompInterface.onInit(InternalFcCodBusinessLogicCompInterface.java:147)
         at com.sap.xss.hr.cod.wdp.InternalFcCodBusinessLogicCompInterface$External.onInit(InternalFcCodBusinessLogicCompInterface.java:227)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:922)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:891)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1084)
         at com.sap.xss.hr.cod.start.VcCodStartComp.onInit(VcCodStartComp.java:196)
         at com.sap.xss.hr.cod.start.wdp.InternalVcCodStartComp.onInit(InternalVcCodStartComp.java:156)
         at com.sap.xss.hr.cod.start.VcCodStartCompInterface.onInit(VcCodStartCompInterface.java:161)
         at com.sap.xss.hr.cod.start.wdp.InternalVcCodStartCompInterface.onInit(InternalVcCodStartCompInterface.java:144)
         at com.sap.xss.hr.cod.start.wdp.InternalVcCodStartCompInterface$External.onInit(InternalVcCodStartCompInterface.java:220)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:564)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
         at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:756)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:291)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:733)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:668)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
         at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:869)
         at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:229)
         at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1344)
         at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:356)
         at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:549)
         at com.sap.portal.pb.PageBuilder.wdDoRefresh(PageBuilder.java:593)
         at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:865)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:684)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(AccessController.java:219)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)

  • Hallo, - I have a PC running Win 7 Professional. After running Kaspersky Internet Security 2015 the  Creative Cloud isn't working any more. I tryed to delete the cloud and reinstall (system error 1) it but no change. I also can't download Flash - even not

    Hallo, - I have a PC running Win 7 Professional. After running Kaspersky Internet Security 2015 the  Creative Cloud isn't working any more.
    I tryed to delete the cloud and reinstall (system error 1) it but no change. I also can't download Flash - even not shutting down Kaspersky. Help Please!!

    Hallo, - I have a PC running Win 7 Professional. After running Kaspersky Internet Security 2015 the  Creative Cloud isn't working any more.
    I tryed to delete the cloud and reinstall (system error 1) it but no change. I also can't download Flash - even not shutting down Kaspersky. Help Please!!

  • System Error Message "0xc000007b".  What's to change?

    I cannot get Lightroom to open and also can not get Nikon VIEWNX2 to open.  Both report the same system error message.  I don't know where or how the system errors can be fixed to allow these programs to download my pictures from Camera to computer.

    Moving this discussion to the Photoshop Lightroom forum.  You may also want to review Error "Unable to start correctly - 0Xc00007b" - http://helpx.adobe.com/lightroom/kb/error-unable-start-correctly-0xc00007b.html.

  • RSA1 error  Logical system name has been changed for this system

    Hello All,
    Earlier the RSA1 was activated for client 300 on our crm 5.2. after that we changed the client to 500 using SE16 -> Type table RSADMINA / Check Colum BWMANDT -> 500.
    But now when we login to client 500 and execute RSA1 it is showing
    Logical system name has been changed for this system"
    In scc4 we have not made any changes. Can you tell what should be done ? in the pop up it is showing following steps
    Change the name of the logical system (table T000) for client back to SIDCLNT300. This enables you to continue working with the system.
    If you really want to change the logical name, than you can, if and when you:
    change the system name back to SIDCLNT300,
    delete all existing connections between this system and other systems,
    delete all transfer structures that still exist, and
    do not use ALE or Workflow.
    Guys do you know how to fix this ? .
    Also do you know Assignment of Source System to Source System ID (table RSSOURSYSTEM) using RSA1 ?
    Edited by: Sahad K on Mar 17, 2008 10:55 AM

    Hello Hari,
    Both the options you said  cannot be used
    since the logical system SIDCLNT300 is used by client 300 and it cannot be given to client 500.  Also there already exist a logical system SIDCLNT500 which is assigned to client 500.
    I found out the issue. In the table RSBASIDOC  the logical system name that can use rsa1( bw  client )is set as  SIDCLNT300).  Only if we delete that entry and set it to SIDCLNT500 ( 500) we can use it on client 500.
    The solution is specified in /message/3284842#3284842 [original link is broken]
    Let me try the solution 2 and inform you.
    Solution 2:
    You cannot delete the source system. Two cases have to be distinguished:
    The source system still exists.
    Switch to Transaction SM59. Find the destination which has the same name as the logical system of the source system from field SLOGSYS in table RSBASIDOC (see above).
    Such a destination does not exist in Transaction SM59. In this case, you have to create the destination to the source system. Name the destination equal the entry in SLOGSYS from above. Then return to the Administrator Workbench and repeat the deletion.
    The entry exists but a remote login is not possible. Correct the communication parameters.
    Everything works. Change to Transaction SE37, function module RSAR_LOGICAL_SYSTEM_DELETE, Sngl. test. Parameter I_LOGSYS = <log. name of the source system>, I_FORCE_DELETE = 'X'.
    The source system no longer exists or was replaced with another source system with the same IP address.
    Proceed as described in the first case but make sure, that the field 'Target host' contains a not existing server in the maintenance screen of the destination (Transaction SM59). If necessary, change an existing entry. Later when you delete, the system asks you whether you want to delete, although the source system is not available. Select 'Ignore'.
    Incase you have any idea other than this please let me know how to edit the RSBASIDOC table  and change the entry to client 500.
    Edited by: Sahad K on Mar 18, 2008 5:07 AM

  • Error reading table TOBJ - System Error when accessing Analysis of Change Requests

    Hi Experts,
    When I am trying to access Status Report or Processing time I get the following errors:
    Error reading Table TOBJ - system error, An error occurred when getting data from the
    processor and Log not found (in main memory).
    I am not sure how this table gets populated or how to check for inconsistencies.
    We have already checked the patch levels and they are on the same level for all environments.
    We never had these errors in our Dev and Qa environments. We recently got a new TREX environment, could that be causing any of these errors.
    Any ideas how to troubleshoot this problem?
    Thanks
    Riaan

    For info. The problem was revolved with 2 notes.
    1668882  and then apply the NWBC runtime 1963267.

  • Getting "SYSTEM ERROR" while generating a PDF in a Workflow method.

    Dear All,
    I'm getting a "SYSTEM ERROR" when I'm calling the below function module in a Workflow BO Method.
    CALL FUNCTION wa_funcnm
       EXPORTING
         /1bcdwb/docparams  = fp_docparams
         invoice                     = invoice
       IMPORTING
         /1bcdwb/formoutput = fp_formoutput
       EXCEPTIONS
         usage_error        = 1
         system_error       = 2
         internal_error     = 3
         OTHERS             = 4.
    The aim is to generate the PDF and store it in DMS. Please let me know, if I'm going wrong somewhere. Any kind of inputs would be sincerely appreciated.
    Regards,
    Tushar.

    Hi Tushar
    You need to the following parameters when calling FM. Background WF process cannot handle dailog.
    fp_outputparams-nodialog = 'X'.
    fp_outputparams-getpdf   = 'X'.
    Refer to Thread below
    Creating Attachments to Work Items or to User Decisions in Workflows
    CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
        EXPORTING
    i_name     = l_formname
        IMPORTING
    e_funcname = l_fm_name.
    *   E_INTERFACE_TYPE           =
    fp_outputparams-nodialog = 'X'.
    fp_outputparams-getpdf   = 'X'.
      CALL FUNCTION 'FP_JOB_OPEN'
        CHANGING
    ie_outputparams = fp_outputparams
    EXCEPTIONS
    cancel          = 1
    usage_error     = 2
          system_error    = 3
    internal_error  = 4
    OTHERS          = 5.
      IF sy-subrc <> 0.
        CASE sy-subrc.
          WHEN OTHERS.
    ENDCASE. " CASE sy-subrc
      ENDIF.
    fp_docparams-langu = 'X'.
    fp_docparams-country = 'US'.
      fp_docparams-fillable = 'X'.
      CALL FUNCTION l_fm_name
        EXPORTING
    /1bcdwb/docparams  = fp_docparams
    emp_info           = fs_per_info
        IMPORTING
    /1BCDWB/FORMOUTPUT = FP_FORMOUTPUT
    EXCEPTIONS
    usage_error        = 1
          system_error       = 2
    internal_error     = 3
    OTHERS             = 4.
      IF sy-subrc <> 0.
        CASE sy-subrc.
          WHEN OTHERS.
    ENDCASE. " CASE sy-subrc
      ENDIF.                               " IF sy-subrc <> 0
      CALL FUNCTION 'FP_JOB_CLOSE'
    *   IMPORTING
    * E_RESULT             = result
       EXCEPTIONS
    usage_error          = 1
    system_error         = 2
    internal_error       = 3
    OTHERS               = 4
      IF sy-subrc <> 0.
        CASE sy-subrc.
          WHEN OTHERS.
    ENDCASE. " CASE sy-subrc
      ENDIF.                               " IF sy-subrc <> 0.
    ENDFORM.                    " GET_FUNCTION_MODULE
    *& Form  CONVERT_PDF_BINARY
    FORM CONVERT_PDF_BINARY .
      CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
        EXPORTING
    BUFFER                = FP_FORMOUTPUT-pdf
    *   APPEND_TO_TABLE       = ' '
    * IMPORTING
    * OUTPUT_LENGTH         =
        TABLES
    BINARY_TAB            = t_att_content_hex .
    ENDFORM.                    " CONVERT_PDF_BINARY
    Regards
    Sandy

  • SSIS BULK INSERT unsing UNC inside of ForEach Loop Container Failed could not be opened. Operating system error code 5(Access is denied.)

    Hi,
    I am trying to figure out how to fix my problem
    Error: Could not be opened. Operating system error code 5(Access is denied.)
    Process Description:
    Target Database Server Reside on different Server in the Network
    SSIS Package runs from a Remote Server
    SSIS Package use a ForEachLoop Container to loop into a directory to do Bulk Insert
    SSIS Package use variables to specified the share location of the files using UNC like this
    \\server\files
    Database Service accounts under the Database is runing it has full permission on the share drive were the files reside.
    In the Execution Results tab shows the prepare SQL statement for the BULK insert and I can run the same exact the bulk insert in SSMS without errors, from the Database Server and from the server were SSIS package is executed.
    I am on a dead end and I don’t want to re-write SSIS to use Data Flow Task because is not flexible to update when metadata of the table changed.
    Below post it has almost the same situation:
    https://social.msdn.microsoft.com/Forums/sqlserver/en-US/8de13e74-709a-43a5-8be2-034b764ca44f/problem-with-bulk-insert-task-in-foreach-loop?forum=sqlintegrationservices

    Insteresting how I fixed the issue, Adding the Application Name into the SQL OLAP Connection String Fixed the issue. I am not sure why SQL Server wasn't able to open the file remotely without this.

  • Background Processing? how schedule job for "System Error" Message .

    Hello everyone,
    in sap help i have read.
    http://help.sap.com/saphelp_nw04/helpdata/en/5a/f72040599a8f5ce10000000a155106/frameset.htm
    PCK> Monitoring>Message Monitoring-->Background Processing
    you can schedule jobs for various background processing:
    ●     Archiving of messages processed successfully
    ●     Deletion of messages that are not to be archived
    ●     Restarting of messages with errors
    ●     Rescheduling of lost messages
    can anyone understand this docu?
    give me some introduction, how can i define and schedule these jobs ?
    thx in advance!!
    best regards
    Yaning

    Background Processing
    Prerequisites
    You have started the message monitor on the initial screen of the PCK and are in Background Processing.
    Features
    Archiving
    You require two archiving sessions to archive messages:
    ●     One session to write the messages to the archive
    ●     One session to delete the persisted messages that have been archived
    To do this, you schedule an archiving job, which implicitly schedules the sessions to write to the archive and delete the archived messages.
    You can define one or more rules for each archiving job; these rules contain conditions that a message must meet in order to be archived by the job. At least one of the defined rules must be met for archiving to take place.
    All information that is displayed for a message in message monitoring is archived, in addition to the audit log for each message.
    Deleting
    A standard delete job is created automatically. It runs once a day. You can schedule additional delete jobs; however, you cannot define rules for them.
    Restarting
    Instead of restarting messages with errors manually with message monitoring, you can schedule a job to automatically restart these messages. This is possible for all messages for which the number of defined restart attempts has been exceeded (messages with the system error status).
    You can define one or more rules for each job to restart messages; these rules contain conditions that a message must meet in order to be restarted by the job. At least one of the defined rules must be met for archiving to take place.
    Rescheduling
    A standard job to reschedule messages is created automatically. The job runs once a day and ensures that messages lost as a result of database failure, for example, are rescheduled. You can schedule additional rescheduling jobs; however, you cannot define rules for them.
    Thx Aamir.
    But I mean the messages with errors in Adapter Engine , not in Intergrations Engine.
    the situation is like Naveen Pandrangi's WebLog
    II. Errors in Adapter Engine [XI :  How to Re-Process failed XI Messages Automatically|XI :  How to Re-Process failed XI Messages Automatically]
    I
    Till now we have seen how to resubmit/restart message that failed in Integration Engine.  One a message makes it from Integration Engine to Adapter Engine, the message is flagged as checked in Integration Engine. The status of the message in Adapter engine does not effect the processed state in Integration Engine. Now if this message was asynchronous, XI will by default try to restart the message 3 times at intervals of 5 minutes before the status of the message is changed from Waiting to System Error .
    *how can i schedule a job to automatically restart these messages with errors?
    best regards
    Yaning
    Edited by: Yaning Liu on Aug 18, 2008 1:43 PM

  • How to fix system error 5364 in mac on os maverick ?

    Hi,
    I was trying to configure Linksys ADSL router with my iMac on OS maverick. Trying to run the set up disk I get an error message "System error 5364". Please help me fix this.

    Hi,
    I too got the same message. But I solved it by just changing the IP address from 192.168.1.1 to 192.168.1.10 for the router and keeping the same IP of 192.168.1.1 for the ADSL modem.

  • System Error in Comm channel monitoring of RWB

    Dear all,
    I have a Proxy to webservice scenario (HCM-PI-SuccessFactors). At receiver side i am using SOAP AXIS adapter. In RWB, the status of the channel is green and running. But when i ping the channel, it shows System Error.
    I have made changes in respective communication channels, activated and cleared the cache. Still same error.
    Later taken complete restart of system. Still same error.
    How to overcome this ?
    Note : 1) End to end scenario is working fine
              2) Among the three trusted certificates installed, status of one certificate is showing warning (status: which will expire on may 5).
    Regards
    Uday

    Hi Hareesh,
    Thanks for you input. I have used the standard swc SFIHCM01. Here it is mentioned that it is applicable for SWC MESSAGING SYSTEM SERVICE 7.31 as shown below
    What does this MESSAGING SYSTEM SERVICE mean exactly. In general is it our PI system.
    plz correct me if i am wrong
    Regards
    Uday

  • RT target reboots due to system error

    The RT target reboots and displays the following error after the normal setup info:
    Reboot due to system error.
    Redirecting output to log file.
    I don't know where this "log file" is saved and I don't know why the rt engine restarts.
    I have 3 PCI 6143 boards and I'm reading at 250 ksamples/sec. I'm storing the data to an RT FIFO (waveform dbl array type) and using TCP to send this to the host computer where I want to display in a graph. The vi on the target computer runs fine without any connection to the host computer. When the vi on the host computer starts up, however, problems start to happen.
    The host computer gets the data from the target very slowly. It takes about 5 seconds for TCP Read to read the byte size. The byte size is about 600kb. After the byte size is read the rt engine mysteriously restarts and displays the message above. My system works fine if I change all the waveform dbl array types to DBL Array. The reason I want a waveform type is because the host computer is not getting enough data with the DBL Array. For example, instead of getting a steady, straight line in the graph, I get a line jumping from 0 to the value it's supposed to be over and over.
    I'm using vis similar to the vis created by the RT Communication wizard for both the target and host communication.

    hi Kristi,
    thanks for responding.
    I'm using Labview 7.1 Real-time on a dell gpx 270 on a LAN (gigabit connection) using static IPs. I'm currently doing continuous analog acquisition on multiple channels (24 total). I have a normal priority loop managing the TCP connection, a time-critical loop within that acquiring data. On the host computer (another dell) I have all normal priority vis. I have 1 VI that contains 2 vis in it- a vi that handles the GUI and a vi that handles the TCP.
    I gave up on using waveforms so i'm getting the y-component out of the 1D-waveform that i get from the daqmx vi and putting that into a 1D dbl array and storing it in an rt-fifo. By the upload, hopefully, you can see what i'm talking about. Without using waveforms the rt target does not reboot, but i still get jitter. The host computer (with the gui) seems to be reading an empty fifo more times than it has data. When I put a 100ms wait in the TCP loop on the host computer, I get the data slower, but no jitter. I don't know anything about timing so I'm guessing that's my major problem. Am I supposed to put waits inside of various loops?? I varied my time-critical loop wait time from 1ms to 3ms to see if anything would change, but no changes.
    On a side note I will be acquiring data from a total of 13 6143 PCI boards from 5 different PCs when this is all done.
    Attachments:
    simplesystem.JPG ‏15 KB

Maybe you are looking for

  • When I play songs through iTunes, it splits up my albums...

    Sometimes when I listen to music through iTunes on my computer, when I click on a song to play, or click the skip arrow the song I select will dissapear and start a whole new album...same artist name,album etc. What's causing this, its really annoyin

  • Error 7 windows 1114

    I uninstalled iTunes and all of the Apple-related products.  I downloaded and installed .NET 4.0 product.  My version of Windows is Windows 7 64 Bit.  I re-installed the latest iTunes software.  I still get this message and cannot access iTunes from

  • Active Directory Rename

    I am running into an issue with renames for Active Directory in SIM 8.1.12. I am using the standard RenameUser View and setting the identity and and accountId. The first time I run through the workflow everything works as expected. Any future rename

  • Required JAR's for developing custom adapter modules for PI 7.31 SP 09

    Hello experts, I have a new development wherein i have to consume .xlsx files in PI 7.31 i have gone through a lot of blogs but did not find any relevant JAR's specially for PI 7.31, I am planning  to go for custom module development for conversion o

  • Sending Alert in mail?

    Hi All, I have created the Alert category, Alert rules and I have added my name in SU01, but still iam not able to get the mails when any error occures in the scenario IDOC to File. If aimk missing any setting that need to be done please let me know.