System Error- restart not possible - Error Message in MONI

Hi,
Though my flow is running fine. with success flags, there are couple of below error messages.
System Error- restart not possible
Message ID D59F2131E30E45E21D5BADCC8C0F8656 for pipeline CENTRAL version 000 already exists in system
why am I getting these errors..
Regards,
Varun

What was the status of your server (XI/ PI and the receiving application) at the time of processing of these messages? Also check if the payload was sent with all the required information.
Regards,
Abhishek.

Similar Messages

System Error- Restart Not Possible

Hi All,
I have Synchronous scenario.
I am trying to handle system error in BPM. so if system error comes i m cancelling process.
So in sxmb_moni, my scenario is successful as it is not getting stuck into queue.
But it is giving me error as "System Error - restart not possible" .
But I need to resend / restart this message again.
So can u please guide me for same
Regards,
Manisha

When your WS id down you are handling the esception in your BPM perfectly....what more you can do is in the exception branch throw an alert to the support team from SAP saying that the processing for a particluar IDOC failed as there was an error while connecting to the end system......in this case you can ask them to restart this particular process once the WS is up....
One option wil also be to increase the default retry attempts of AE while connecting to the end system....affects performance....maximum retry attempts is 10 (if i am not wrong).....so if your WS comes up during this time you can send the message......
We have a similar case wherein same logic has been applied in BPM...which asks the support team to restart the process if the process fails due to a communication error with the end system.
Regards,
Abhishek.

Restart not possible (Xml message)

Hi All,
I am facing the following error in SXMB_MONI , restart is not possible & unable to check the payload.
can any one please let me know what is the cause for it & how to resolve it.
INTEGRATION_SERVER_PIP - -
Sender Component
urn:wssprocessorWsd/wssprocessorVi/document -
sender name space
wssprocessorVi_Document----
Sender Interface
"Current Status"----
>Version
Synchronous----
>Type
BE -
>QOS
PROXY----
Outbound Proxy
& The Receiver components are Blank.
Message Status is System Error RESTART NOT POSSIBLE(RED colour Round Button)

Have you configured Receiver Determination with the appropriate target system and interfaces? Looks like your target system is down or connectivity errror...
Go to SXMB_MONI and pick that message and navigate pipeline steps and see where it fails.. Also the steps it fails you check the payload or response mesg and you will see the details of error.
Also go to RWB and check your communication channel monitoring area. See any help you get.
Also go to RWB and go to message monitoring. See the inbound side of the interface and see what is the reason for the error.. Sometime if the receiver comm channel or target system has issue you mesg stop.
Check SMQ1 and SMQ2 and see any locks for those mesgs. If so remove locks and activate again.

Aplication Error - Restart not possible

HI all,
We are getting CCMS alerts because synchronus messages that failed in the processing, the problem is that we are getting everything alerts for the same failed messages. I wonder if there is any way to cancel those messages to avoid received that CCMS alerts.
Any help will be appreciated.
Thanks
Ivan

Hi, Ivan.. ::)
Maybe this can help.
Continuous CCMS alerts on failed synchronous messages
Regards.

Server0 getting down and logon not possible ( error in license check)

Hi Guys,
I rebooted my SAP server and after that server0 is in disabled mode, well both the boxes seems to be green but the server0 node in disable mode as if it is maintained by some parameter and I have changed it, which is not the case, also there is no log with dev_server0 since then. I have followed 723909 note and also copied the parameters of a running server but didn't get success. Also when I am trying to login through SAPGUI its giving me error " Logon not possible( error in license check)" while the license is already installed.
dev_w0 log says
M Wed Sep 01 14:42:14 2010
M *** ERROR => sap license, no valid license found [likeyapi_w.c 2260]
M *** ERROR => wlikey_check_webas: There is a permanent license key for "NetWeaver_ADA" in the system but it has never been checked successfully. In this situation a temporary license key mustn't be installed. [sliclikey.c 1314]
M *** ERROR => The temporary license key for NetWeaver_ADA could not be installed [likeyapi_w.c 2305]
SAP ECC 6.0 release 700
DB: MaxDB
OS: Win2k3 server
Please help.
Regards
Mridul Gupta

License issue is resolved but server0 node is still in disable status while the instances shows green, I checked dev_jcontrol log and found :
[Thr 2168] [Node: server0] java home is set by profile parameter
     Java Home: C:\j2sdk1.4.2_25-x64
[Thr 2168] JStartupICheckFrameworkPackage: can't find framework package E:\usr\sap\W6Q\DVEBMGS12\exe\jvmx.jar
JStartupIReadSection: read node properties [ID123322550]
-> node name          : server0
-> node type          : server
-> node execute       : no
-> jlaunch parameters :
-> java path          : C:\j2sdk1.4.2_25-x64
I think the node execute sud be yes, I just wanted to know how I can enable this.
Regards,
Mridul Gupta

System error and restart not possible

Hi
I have developed the Proxy to SOAP scenario and it used to work normally as designed, But suddenly it started giving the System error and restart not possible,
I see the following error in the Runtime work bench on the Receiver CC
SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error
Can anyone let me know what the error is
Thanks
PR

Hii
If this channel was in working state earlier, then this error would mean that the receiver webserver hosting the webservice has some problem. You may contact the receiver system for checking out if they have problem at their end and if they agree resend the messages and it should pass through.
It may be problem with certificates even.
Best Regards

Error : Modification not possible- while creating source system in BI7

Hi BI Guru's,
We are using BI7 and source system ECC6 ,We are about to move to production, When creating the source system in BI PRD system we getting the Error Modification not possible.we created RFC connection, background user and remote connection works fine.
Is there any body put some light on this issue
thanks in advance,
Regards,
Mohan

Mohan,
Check if your logical systems are in place in SCC4 and also in the transport connection.
Also check if you are connecting to the source system by IP Address or by logical name.
Accordingly you would have to maintain the source system connections.
Arun

Logon not possible (error in license key)

dear sir
I had a temporary license which got expired yesterday. but i received the permanent license today
and i wanted to install it on the solution manager server, but when i 'am trying to log in ,it throws
an error at the bottom that " logon not possible (error in license key ) "
pl given a solution
thanks
john

Logon using SAP* in client 000.
Probably you need to maintain profile parameter login/no_automatic_user_sapstar = 0 and restart the system before you are able to logon with user SAP*

Navigation Not Possible error

Hi All,
We are getting navigation not possible error while creating Travel Expenses.
Recently our system was upgraded from EHP5 to EHP6.
We have copied standard launchpad and we have assigned that custom launchpad role to the user.
We have debugged the method NAVIGATE_TO_OBJECT in class CL_FITV_NAVIGATION and came to know that in the code launchpad value "ESS" is hardcoded.
Please let us know how to proceed further to get our custom Launchpad Parameter into that method?
Regards,
Ravi

Hi,
Yes this shouldnt be hardcoded, this should be either an application parameter or defined in customizing as it is done in many other standard functionnalities... but for FITV it is not the case...
I think that you only have 3 options here :
- Create an OSS message.
- Modify CL_FITV_NAVIGATION...
- Just edit ESS/MENU directly using transaction LPD_CUST
Regards

"Logon Not Possible (Error in License Check)" at DR Site

Hi,
I am doing DR ( Disaster Recovery ) Site. I used Tivoli Storage Manager ( TSM ) to take FS Backup & DB Backup.
On the DR site I restore the same backup successfully and the resultant is I am able to run my SAP server.
When I try to connect through SAP Logon. it gives me first screen.
Problem none of the user is permitted to enter except sap*. for other user following message come.
"Logon Not Possible (Error in License Check)".
i know how to apply new license but in requesting permanent license the SAPnet is not asking hardware key.
Best Regards,
Syed Saifuddin
Software Architect ( JEE 5 )
SAP BASIS Administrator

Hi Syed,
Please check the SAP Note
Note 94998 - Requesting license keys and deleting systems.
Also check the sapms<sid> port.
Thanks,
Prabhat

Posting of retirement/transfer not possible (error in the asset) Mes: AA465

Dear Experts,
while doing ABUMN, i am getting the following error
Posting of retirement/transfer not possible (error in the asset)
Message no. AA465
Diagnosis
An inconsistency was found for the asset 01 during the last recalculate values.
System Response
Posting is rejected.
Procedure
Choose the function Recalculate values in the master data maintenance transaction, and remove any inconsistencies.
Regards,
Venkat

Thanks ravi,
I run the AFAR but nothing is visible in test run.
I am defined the cut off key(5%) and assigned in to the dep key.
we run the depreciation for the last 5 months. some of the assets fully depreciated before lagacy data upload. in AW01N those assets showing the error message. Now that asset(fully depreciated asset) is transfer to another business area. then it showing that:
Posting is rejected.
Procedure
Choose the function Recalculate values in the master data maintenance transaction, and remove any inconsistencies.
Run the depreciation in AFAR means. in which period i can run.
Thanks
Venkat

Sap license error--error is "login not possible (error in license check)u0094

Hi,
I we are not able to login in our IDES r/3 system, it is showing login not possible (error in license check), only sap* is able to login . I have already applied sap license that will
Expires on 31-12-9999, I have old license also it was expired on 07-02-1996 it is under red light, second one under green light. I tried to del old one but system says through sap* not possible, only sys admin will do..what I can do now..

Hi,
When your license expired you can only login to the system with SAP* user.When you are login using sap* and deleting old license you will get a popup with this message <b>SAP* WHEN THE VALID SYSTEM LICENSES HAS EXPIRED,ONLY THE SAP* CAN LOG ON TO THE SYSTEM.IN THIS CASE,IT WOULD BE DANGEROUS TO LICENSE
THIS IS WHY THE SAP* IS NEVER ALLOWED TO DELETE A LICENSE</b>
So can cannot delete the expired license with SAP*.If u want to delete means try to login with <b>dilog user</b> and go to slicense T-code.
Select the expired license in menu goto EDIT->Delet license(shift+f2)
kiran kumar.v

Adobe Acrobat XI pro version, Windows 7, running on iMac parallels, converting pdf to a pdf with reduced size is not possible, error: error in converting the file! What to do? Its a bit annoying not to be able to store pdf files in reduced size, any idea?

Adobe Acrobat XI pro version, Windows 7, running on iMac parallels, converting pdf to a pdf with reduced size is not possible, error: error in converting the file! What to do? Its a bit annoying not to be able to store pdf files in reduced size, any idea?? Thanks, Jörg

Hi Jorg ,
Are you trying to reduce the file size with the "Reduced size PDF" in the save as other option.
Give it a try if you haven't done it prior.
Open that PDF>File>Save as Other>Reduced size PDF.
If possible ,please share the snapshot of the error message with us so that we can have a look in order to assist you further.
Regards
Sukrit Dhingra

Document Contains Errors - Approval not possible

Hi,
We are having issue in our Invoice Workflow.
When ever the approver is trying to approve the document, he is getting the error message "Document Contains Errors -> Approval not possible".
We have verified the document and check for error messages and found the below error messages on the Document.
E BBP_PD 047 Posting period 006 2011 is not open.
The document was submitted some time in the first week of December and as part of AP process the posting period will be closed during the first week of every month. This is a common business case and why is it stopping from posting the doc?
FYI..this Invoice is posted against the WBS element.
Pls give some insight on this and how to address the issue.
Regards,
Satya

Hi,
The posting date in the invoice is referring to the past period which is closed.You will have to change the invoice posting date to current period date and then process.
Regards,
Sanjeev

System Landscape directory not available error,

I am still a beginner, and I am having some slight trouble understanding, what tools would be needed, and how to install. I am using the forums.
We have the MII Discovery Server up and running.
NWDS Server installation is done.
We have the MII track ready to be used for Development(SLD URL is available) , Userid and password available
I am working on installing the NWDS 7.3 Developer Workspace.
Would I also need to do NWDS Server install on my laptop?
Would these steps be sufficient?
1. Download and install JDK 1.6
2. Copy the file nwds-extsoa-7.3-SP00-PAT0000-win32.zip from:
<your download location>\51039309\DATA_UNITS\JAVA_IDE\distros\com.sap.netweaver.developerstudio.distribution.complete.extsoa\8.30.0.101020102100
to a convenient folder.
3. Extract the content and you will have a folder with name eclipse.
4. Launch the Netweaver Developer Studio from folder eclipse, you may want to create a shortcut on the Desktop.
5. If you haven't maintained JAVA_HOME property or if it's pointing to some other java version, eclipse will complain about it. In the dialog window locate the JDK 1.6 installation. Path to JDK 1.6 should be something like
C:\Program Files\Java\jdk1.6.0_25\bin
6. Restart the NWDS after this and select a suitable workspace.
7. Set the run time engine in NWDS, by going through the menu path:
Window->Preferences->SAP AS JAVA
Question:
1. I am unable to Set the run time engine in NWDS, please could you give me details steps with what I would need to enter for Instance Hostname and Instance Number...etc
2. As part of Development installation do I have to Modifying the Logon Page? Do I have to go thru the Server installation in order to start developing on eclipse environment?
I do not have the war file. How do i Copy the war file tcsecumelogonui.war from
<Installation drive>:\usr\sap\<SID>\J00\j2ee\cluster\apps\sap.com\com.sap.security.core.logon\servlet_jsp\logon_ui_resources\tcsecumelogonui.war
3. System Landscape directory not available error,
In the Component Browser when I right click and select New u2013 Development Configuration u2013 Import From System Landscape Directory (SLD) u2013 Next (Enter UserID and Password)
Thank you

Hello,
For the SLD error, please, configure SLD following as per this docuemtnation:
http://help.sap.com/saphelp_nw04/helpdata/EN/bb/c2b6421a75da11e10000000a155106/frameset.htm
Regarding the settings to enter NWDS to connect to AS Java, you have to enter the java instance data so that NWDS can connect to it in order to make deployments, etc....
Please, see also the following documentation that explains stp by step how to work with NWDS.
http://help.sap.com/saphelp_nw04/helpdata/en/fe/a3996fa314f94f8a0c3475b08636d0/frameset.htm
I hope this helps you.
Regards,
Blanca

System Error- restart not possible - Error Message in MONI

Similar Messages

Maybe you are looking for