System error: RSDRC / FORM DATA_GET_ODS

Hi BW Guys,
While running info spoke i am getting below error....Could you please let me know how can i solve this issue.
System error: RSDRC / FORM DATA_GET_ODS
Thanks in advance
prasanna

THe error message occurs whiulw reading data from ODS.
see the OSS note 848829 for details.
Though the note explains about the error while running report, it holds good in your case too.
cheers,
Srinath

Similar Messages

Abort Syatem Error :RSDRC/FORM DATA_GET_ODS error in RSDRO_READ_ODS_DATA

Hi ,
when I execute the report/query from ODS i'm geting the follwing error and it is disconnecting from BW server.
" SQL Error 4030.
Abort Syatem Error :RSDRC/FORM DATA_GET_ODS error in RSDRO_READ_ODS_DATA .
ABORT system Error :in Program SAPLRSDRC and FORM DATA_GET_ODS "
I have checked the ODS seting and it was enabled and active.
please any body is having solution
Thanks
Ram

I do not have problem loading data into my ODS.
My scenario is as follows:
1. The source field is OPTIME of type P and stores date and time
2. I created a Keyfigure ZOPDATE as date field of type DEC.
3. The aim is to take YYYYMMDD from OPTIME into the ZOPDATE InfoObject (KFG).
4. I Created a conversion routine to pick YYYYMMDD from OPTIME and assign it to ZOPDATE.
5. It worked fine and stored the data in ODS as DD.MM.YYYY.
6. I have a similar IO ZPUBLISH but getting its data from a date field POSTING_DATE
7. The problem is that ZOPDATE cannot be displayed as date in my query wheras ZPUBLISH can.
8. If I insert ZOPDATE in the query I get the error, and if I remove the query runs fine.
If I store the date field as Characterestics I may not be able to use as colunm in the report, that is why I wanted to have it as KFG.
Please someone should help out.
Edited by: SALE MUHAMMAD ABDULLAHI on Jun 4, 2008 6:50 AM

System Error: RSDRC / FORM AUTHORITY_CHECK RSDRC

Hello,
I am having a problem regarding the execution of an Infospoke. This infospoke has an ODS as source and a DB table as a destination. Whenever I try to start the extraction of data a window pops up telling an error has occurred during exportation process. The monitor shows the following message: "System Error: RSDRC / FORM AUTHORITY_CHECK RSDRC". Its ID message is DBMAN.
I have been trying to solve this problem through several ways but I didn't succed. I look forward to receive some helping comment so that I can get throuh this problem.
Many thanks in advanced
Matias

This is a authorization errror. Please make sure you have enuff authorizations to run the infospoke. Refer to the following thread...
RFC destination error in transport
Hope this helps.

System error: RSDRC / FORM AUTHORITY_CHECK USER NOT AUTHORIZED 0SAL_DS01 0S

Hello
I have a big problem, I a have active the ODS 0SAL_DS01 with the update rule 0CRM_SALES_ACT_1.
I have upload the data without problem.
When I want to see the data I have this message :
Your user master record is not sufficiently maintained for object Sales Org
System error: RSDRC / FORM AUTHORITY_CHECK USER NOT AUTHORIZED 0SAL_DS01 0SAL_DS01
Can someone help me please?
Regards.
Farchid

Hi Farchid,
You need auth for the SalesOrg Auth object that is securing this ODS. In RSSM, you can enter 0SAL_DS01 in the check for InfoProvider box and then click display. You should see a check mark against this auth object for SalesOrg. Makre sure that you have the related role assigned to your ID.
Hope this helps...

Infospoke error RSDRC/FORM AUTHORITY_CHECK RSDRC/FORM AUTHORITY_CHECK

HI
I executed the info spoke and in the monitored of the info spoke i got the red request when i check the error it shows
Sytem error:RSDRC/FORM AUTHORITY_CHECK RSDRC/FORM AUTHORITY_CHECK
under data package . so i tried to delete the request but unable to do so.Info poke is delata unable with DB table.
what can be the reason of failing the laod ?
please help me this is in PBI issues
Thanks in advance
PN

Karthik,
First, word of caution with the logical file destinations... Sometimes they don't work as expected... I had a problem once that BW was ignoring it and still trying to copy the file in the default folder...
Ask your Basis or Security guys to activate a "Trace" for your user and then try to do it again... They'll be able to capture any issue in the Trace Log...
Regards,
Luis

RSDRC / FORM DATA_GET CUBETYPE UNKNOWN

Hi Experts,
When I execute a particular MultiProvider to view data via LISTCUBE tcode.
I get the following error.
System error: RSDRC / FORM DATA_GET CUBETYPE UNKNOWN
Message no. DBMAN100
Diagnosis
A system error with the following parameters has occurred in the data manager:
Parameter 1 = &v1&
Parameter 2 = &v2&
Parameter 3 = &v3&
Parameter 4 = &v4&
This Multiproviders includes 3 cubes (X, Y & Z) and 2 cubes out of 3 (X & Y) reading data from other 2 cubes (A & B) usung FM RSDRI_INFOPROV_READ.
Reports are also not shoving me correct values in some cases even I can see data in underlying cubes.
It seems that this is related to this FM. Our system is BW 3.5
Please help me to resolve this.
Thanks in Advance..

Resolved by using RFC FM instead of Local.

Got system error while executing the workbook

Hi All,
While executing the workbook, I m getting the following error:=-
Abort system error:RSDRC/ Function rsdrc_cube datget_disp rfc tas
Abort system error:RSDRC/ Func RSRDC_MULTICUBE_DATA_GET_PARA ERROR IN RSDRC_

Hi Sonika,
I think the DataTarget is not in active status.
Assign points if it helps...
Regards,
ARK

Error CL_RSR_CHABIT form SET_BIT1-02-

Hi!
I execute query on multiprovider.
There is message "Termination System error CL_RSR_CHABIT form SET_BIT1-02- "
What is the problem?

Hi Keu,
You should check the mapping in the multiprovider involved and save the multiprovider again, after that reactivate the aggregation level and regenerate the affected query in RSRT.
This might fix it.
Thanks,
Michael

!!System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE

Hi Gurus,
Mater data text loading from a DSO to a InfoObject has failed in the process Chain at DTP step while trying to extract Data packet 2 from the DSO.
In the log i am getting following error message:
"System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE (see long text)
Message no. BRAIN299".
Please help urgent.
FYI.....
we have recently done upgrade from BI/ABAP SP11 to SP15 and the latest Java SP || 14 (both included in SPS 14).
Points will surely be awarded.
Thanks,
Anurag

Hello Anurag,
Could you solve this problem? If so, please share the solution with me. I'm getting the same error while loading data using DTPs.
Regards,
Neha

Abort System Error in program SAPLRRS2 and form INITFL_ASSIGN-01 error

Hi All,
When I refresh a query/workbook getting following error message and can not proceed further..
Abort System Error in program SAPLRRS2 and form INITFL_ASSIGN-01
We are using BW 3.5 and BEX reports.
I'd appreciate if you could help me on this

I don't know if you have since been able to resolve this problem.
Anyway, for future reference, I have just had the same error message and was able to resolve it by simply removing and then reinstalling one of the characteristics, together with its variables and filters, in the free characteristics section of the query.
Hope that this is of help to someone.

System error: CL_RSR_RRK0_MULTIPROV_BUFH and form _GET_provbit-02 .

Hi
I'm getting the following error while executing a report.
System error: CL_RSR_RRK0_MULTIPROV_BUFH and form GETprovbit-02 .
Experts please suggest a possible solution .
Thanks

check out note :
1275269 Termination:CL_RSR_RRK0_MULTIPROV_BUFH form GETPROVBIT-01-
Edited by: Arun Varadarajan on Feb 27, 2009 5:36 PM

System error in program SAPLRRSV & Form RRSV_CHAVL_TO_VALUE_CONVERT

Hi,
While running a Bw Report I'm getting the following error:
System error in program SAPLRRSV & Form RRSV_CHAVL_TO_VALUE_CONVERT
When checking the report found that one of the Characteristic of the report is in incorrect Internal format. As a result it shows inconsistency when checking the values of the charactersitic for conversion exit.
Tried correctin this error by doing a correct error but it didnt work.
When checked the SID table the characteristics had some invalid records which are not maintained in the Master Data table.
How to correct this error?
-Thanks
Sree

Hi Sree,
We're having the same problem. I'd like to know how to solve it. Could you please tell me how to do it?
Thanks.
Best regards,
Julian.

System error in program SAPLRRI2 and form GET_QUERY_PROPERTIES-01

Hi All,
I'm configuring the integration between BW 7 SP 11 and Portal 7 SP11. I have problems in the IP functions.
The following error ocurrs in QueryDesigner when trying to execute a Query that is on an <b>Agregation Level</b> :
<i>The initial exception that caused the request to fail, was:
Termination message sent
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
com.sap.ip.bi.base.application.exceptions.AbortMessageRuntimeException: Termination message sent
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessageInternal(MessageManager.java:148)
at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessage(MessageManager.java:113)
ABEND: Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
ABEND: System error in program SAPLRRI2 and form GET_QUERY_PROPERTIES-01- (see long text)</i>
When I execute Querys that are on Infoproviders, everything is ok.
Any Idea??
Thnks a lot!!!
Yolanda.

Hi,
Are you getting an ST22 dump in the backend, we used to get this kind of error in case of hierarchies, please check 2 things
1. Agg level is active
2. Check the query (option is available on query designer)
thanks

System error in program SAPLRRI2 and form INPUTABLE_CHAFREE-02

Hello experts,
I get the following error when I execute the input ready query which was created on the aggregation level in BI IP.
The system information is SAP BI Add on 7.X(based on 7.10) SP 2,Patch 1, Revision 490.
Thanks
Terminate: System error in program SAPLRRI2 and form INPUTABLE_CHAFREE-02- (see long text) [A299(BRAIN)]
Diagnosis
This internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.

You may wish to check this
Note 1048923 - BRAIN X299 in SAPLRRI2; form INPUTABLE_CHAFREE-02-
Hopeit Helps
Chetan
@CP..

System error in program SAPLRRI2 and form LRECH_SUMM_FUELLEN_6-01

Hi,
I am trying to execute a report and it gives me this error "system error in program SAPLRRI2 and form LRECH_SUMM_FUELLEN_6-01" I have done a bunch of cell editing stuff and when I go and see each cell looks good,I am not able to figure out where exactly this issue is. Can anyone help me with this. I tried to even switch on the Trace in RSRTRACE but it goes to the debugger and stuck in some SAP code. Don't know what exactly the problem is. Any help would be appreciated.
Thanks
Jay.

Hello Jay,
If valid for your system release and support package level please apply the SAP note 1129450.
Best Regards,
Des

System error: RSDRC / FORM DATA_GET_ODS

Similar Messages

Maybe you are looking for