System error type 41. Startup problem

I have an iMac (500) G3 (Summer 2000) and it will not complete its startup. It starts, then before it is complete I get a bomb message, 'Sorry, a system error has occurred."Time Synchronizer" Error Type 41. Restart.'
When you restart you get the same message. I have tried restarting from the CD, but the same thing happens. I can't use the computer to try things because it doesn't complete its startup. Any suggestions?

I have been looking around and stumbled across KB 24431, Mac OS: Error Type 41.
Also in KB 30691, Mac OS: When and Why to Perform a Clean Installation it says
Exception: If the computer starts up to a Type 41 error with extensions off, the issue is probably with the Finder alone. Instead of performing a clean installation, drag the Finder file from the System Folder to the Trash, then perform a regular installation over the existing System Folder.

Similar Messages

SYSTEM ERROR : com/adobe.processingexception:Problem accessing data from De

Hi SAP Guru,
We have configured ADOBE for separate ABAP server and Java Server.
But when I am execution report FP_TEST_00 getting below error
ADS: com.adobe.ProcessingException: Problem accessing d(200101) Message no. FPRUNX001
FP_CHECK_DESTINATION_SERVICE
FP_CHECK_HTTP_DATA_TRANSFER giving error
SYSTEM ERROR : com/adobe.processingexception:Problem accessing data from Destination dest :FP_ICF_DATA_IP1//sap/bc/fp/form/layout/FP_FORM_SECURITY_TEST.XDP?fp-language=DE
But report fp_pdf_test_00 is giving postive response.
I have troubles hooted according to note 944221 , my configuration is ok but no success.
Please help to resolve this issue.

Hi,
Check your ADS Connection .
Do one thing
Go to T-code "SM59" - "RFC Destinations (Display/Maintain)"
select "HTTP Connections to External Server" - > ADS
Double click there and check the all the settings " Administrations " , Technical setting , Logon and security , Special option .
Please check the log on and pass word with the help of your SAP BASIS consultant it will work fine .

Recurring system errors lead to massive problems

Hello there,
sorry that I couldn't find a better title for my problem. But I really have problems finding the cause for these errors.
I have an mid 2011 macbook pro running 10.8.3 with an samsung 830 ssd inside.
So every once in a while I get massive system errors mainly after i wake it up from sleep. Mostly all open applications cannot write to the file system throwing different errors. Also my hdd starts reindexing the whole disk from scratch. If I restart my macbook even after unticking "open running applications again at startup" all applications get opend again. In this state I am also not able to open applications anymore. These start just jumping and close themselves after some seconds. Sometimes these errors still persist and only after some restarts I am able to close the applications correctly. E.g Firefox says that an instance of it is already running and that I can't run serveral instances of it. But firefox is not listed in "activity monitor"...
I copied some errors which get thrown by some applications:
Terminal.app:
     - login(.....) malloc: *** error for object 0x7fe173400730: pointer beeing freed was not allocated *** set a breakpoint in malloc_error_break to debug
TextWrangler:
     - MacOS Error code: -50: Invalid parameters were detected for an operation
     - MacOS Error code: -102: No object of that in scrap
Webstorm: throws a java.io.exception
Could all this be a problem of the hdd? because i am at my 4th reinstall and these errors still come up randomly...
I would really be happy if someone could pinpoint the cause for these errors. Thanks in advance!

So I double checked again and I have the latest firmware.
After the reinstall no big problems happend but now I am not able to fully copy some folders from my external hdd saying "finder cannot read/write files" even though I made "chmod -R 777" on that folder.
Also after downloading googlechrome.dmg the os says "the disk images couldn't be opened. Reason: image data corrupted". Even after several atempts of downloading. I tested on a mac pro also with an sasmung ssd and there copying the folder and running the .dmg works..
So it seems that the hdd is faulty. I have to talk to samsung then :/

6110nav system error on camera startup

I have a 6100nav where everytime i start the camera i get "general system error" and then boots back into the main screen
This occured out of nowhere with no additonal programming installed previously.
I have done a system reboot but to no avail.
Any suggestions?

If the messages are gone your only option may be to contact your sim provider and see if they have records, unless of course you have backed up your phone on Nokia Suite in which case they would all be on your computer. As for crashes , the N97 Mini is very old in technology terms, but you may be able to prolong its life by doing a hard reset and installing/reinstalling the latest available software. Whatever you do , back up the phone on a computer and at least you can save whatever data is on it at the moment.
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

"system error type 102"?

OK, I recently had to remove the drive in my PowerMac G3 that had OS X Panther on it and now am using my drive with OS 9.2.2. But when it starts up, it says it cant because of the a type 102 error, and it tells me to restart using no extensions using the shift key. It starts up fine when I do, but how do I fix it from there? I'm planning on reinstalling Panther today so help would be appreciated.

Despite Tom's otherwise excellent advice, I find holding down the spacebar at startup often makes my Mac unstable. Often, it will not proceed to boot after extensions are re-arranged.
I prefer to boot up (using the shift key the first time to get extensions off) then use Extensions Manager in the running system (not at boot-up) to add a few extensions at a time and re-boot. Using a different name for each incremental set allows you to return to a previously-working set after a bad choice, and continue the investigation.

Sytem Error:com.adobe.ProcessingException:Problem accesing data

HI Experts,
We are trying to perform ADS Configuration from ERP(DEV) system to SOlman Java. One more thing is we already have ADS connection(GSD) from another ABAP system to Solman Java.
In GSD,ADS is working fine but in DEV System(2nd ADS connection to Solman) we are getting below error when we execute FP_CHECK_DESTINATION SERVICE but we are able to execute FP_TEST_00 and FP_PDF_TEST_00 reports successfully.
SYSTEM ERROR : com/adobe.processingexception:Problem accessing data from Destination dest :FP_ICF_DATA_DEV//sap/bc/fp/form/layout/FP_FORM_SECURITY_TEST.XDP?fp-language=DE
My question is:
1.Is it possible to create 2 ADS connections to one Java System(in my case GSD,DEV ABAP systems trying to connect to Solman Java system via ADS)?
2.If yes, please tell us how can we rectify the above issue we are facing.
We didnt miss anythig from the config guide, thus we are able to config GSD perfectly.
Thank in advance
Rkumar

Hi Sethu
I rechecked roles and found the below roles assigned to the ADSUSER but not generated. i generated and executed the program FP_CHECK_DESTINATION_SERVICE and now ADS setup is perfectly working fine.
Z_ADS_SAP_BC_FP_ICF
Z_ADS_SAP_BC_FPADS_ICF
Z_ADS_SAP_BC_JSF_COMMUNICATION
It was a mistake that i forgot to generate roles after copying from one system to another system.
my problem is solved.
Thank you

Officejet Pro 8600 error message on startup "Printer or ink system problem"

My networked HP Officejet 8600 ran out of black ink...changed cartridge, then error message that required the C,Y, & M cartridges also be replaced...done...now get a startup "problem printer or ink system" message.
Have reseated the printhead and cartridges multiple times. Same message at startup.
Suggestions please!

Not resolved...Did all items...still got message (as so many others have also).
Not solved...unhappy that this occured the month after warranty
expired...then read the many, many other experiences of others
that seem much too similair to my situation...makes me feel that HP
potentially built-in a failure of this nature...ordered a new printhead.
If this fixes the situation and I get a similar happening 13 months from now...
my ambulance chasing relative may have great grounds for the career making
class action....

At startup-system error and divide by zero

I've been having a lot of problems starting up my beige G3 mini tower, it has 233mhz, 384ram, mac os9.1. I've zapped the pram and held the shift key down to boot with extensions off, didnt work. I've changed the battery twice in case the first replacement was bad, it started up and ran long enough for me to trash all the preferences, I tried to change the extensions, but when restarting it was back to not completely starting up. I've tried pressing the button near the pci slots with the battery out, 30 seconds, waited 30 minutes and held down the button for another 30 seconds, replaced the battery, checked the sound card for looseness then at startup it worked till I changed the time and date. I tried the battery and button again this time waiting over night between pressing the button for 30 seconds, after startup I was able to run disc first aid and it said everything was ok, then crashed again when I tried to change the date and time. I've even tried booting up from command/option/o/f, I'm not sure what firmware is but it would try to start up that way,but was very slow with a os cd in the cd drive. I tried to erase the hard drive but I couldnt get it to start up from a cd, iv'e tried os9, the original cd that came with the computer and a system recovery cd.
Most times when trying to start it up it chimes, then the happy mac with a grey screen, then the mac os screen, then the bomb with "system error" and under that "bus error" under that it says to restart with extensions off. sometimes the button for restart will even work with the cursor. Once, after trying to start up after all the battery removal, pressing button near pci slots , pressing com/opt/o/f, extensions off, the screen getting to the mac os then the bomb dialogue, it said system error and instead of saying "bus error" it said "divide by zero". Thats the first and only time I've seen that one. Also, the grey screen (with the happy mac disc icon) now has horizontal lines with texture? that I havent noticed before.
got any ideas what I should do next? I probably wouldnt bother with my G3 anymore because I just bought a new Imac, but I have a vinyl cutter hooked to it, it has the old round serial port cables and I would have to buy new software, cables and dongle to use it with my new Imac, I also have illustrator, photoshop, scanner, and drawing tablet on my G3 that I cant use on my new Imac (intel) leopard.
Is my hard drive or motherboard dying? is there a way to find out if and what hardware is messed up? and if so, is there still still parts out there for this G3?

Hi, R1camper -
I ran disc first aid from the cd and and it said it couldnt fix-overlapped extent allocation,4,479.
That is a type of disk directory damage, one which Disk First Aid can not repair.
Alsoft's DiskWarrior can usually repair that kind of damage, with no loss of files. If you choose to go this route, suggest you call (or email) Alsoft's sales department, and request an older version of DiskWarrior - the current versions won't run on your Beige G3/MT.
However, if you can manage to live with the loss of files, you can probably replace the hard drive for less cost.
Your Beige G3/MT came with either an ATA (now often referred to as PATA and/or IDE) drive or a SCSI drive - it could have been ordered with either when the machine was new.
With luck it will be an ATA drive, since those are the least expensive and the easiest to install. Such drives are not Mac-specific - any ATA drive designed for internal use and of appropriate size will work. The only item of concern is to set the drive's jumpers properly. The drive should be jumpered as Master (it may come preset as Master or as Cable Select - Cable Select will not work on your model), unless it is a Western Digital in which case it should be set to Single if that is an available choice.
There is probably little to gain by getting a 7200RPM drive, especially if there is extra cost for one vs. a 5400RPM drive - the relatively slow internal bus speed on your machine will not be able to take significant advantage of a faster drive.
Re the RAM, if you have the time you might try replacing any you took out. Over time the contact the module makes in its slot can get iffy - removing and replacing the module usually fixes that problem, by wiping the contacts clean.

SOAP adapter engine with system error, problem with fault message.

HI,
I have IDOC -> PI -> SOAP scenario.
Idoc to PI is async. I have no problem in receiving the idoc in PI. The message mapping is carried out and sent to the adapter engine. I can also see the technical routing payload. It is sucessful at XML monitoring in SXMB_MONI.
The error is at PI -> SOAP.
I have wsdl provided by the receiver webservice. Which I have imported.
And created a service interface against this wsdl. I tried changing it to both sync and async.
I have also provided fault message.
I have set a receiver soap communication channel and provided the target URL like "http://xxx/services" and soap
action = processDocument. Also provided user id and password.
I have a
Sender Agreement
Receiver determination
Interface determination
Receiver Agreement
I check in RWB adapter engine, this message goes to system error. The error log is as shown at the bottom.
When I see the message content, the SOap document shows me the details about IDOC, Instead I feel it should match
with the wsdl, where they have specified the corresponding interface name and address location etc.Please correct me.
How does the receiver know which service interface is it? The Service Interface which I created in the ER is
different from the WSDL, Does this have to be same? I see that the soap document in the adapter engine has the
Service interface name which I created in the ER. Where in the document the Reciever interface name is sent?
Where can I see the generated soap document for the receiver?
Is there some setting/configuration required in PI for this to work?
I tried using the tcpgw to see the error. If I dont provide the service interface name in the communication channel
then I get the following error in the TCPGW. "The service cannot be found for the endpoint reference"
When I provide the service interface name in the communication channel I get a valid fault message.
Similarly
When I use SOAPUI, I can see the fault exception being return. The adapter engine doesnot show an equivalent message
instead it goes into system error as shown at the bottom. I guess this is expected, if so what is the work around? (I found this weblog /people/alessandro.guarneri/blog/2011/01/10/soap-fault-in-sap-pi-hijack-it, do I need to implement this? Or use ALEAUD?
The fault message what I see in SOAPUI has the below format.
<soapenv:Fault xmlns:axis2ns1="http://schemas.xmlsoap.org/soap/envelope/">
         <faultcode>axis2ns1:Server</faultcode>
         <faultstring>nested exception is: psdi.util.MXApplicationException: BMXAA7136E - Validation failed when the
                            database default values were set. See the associated message for more information.
           BMXAA4190E - Country NZ is not in the value list.</faultstring>
         <detail>
            <Exception>org.apache.axis2.AxisFault: nested exception is: psdi.util.MXApplicationException: BMXAA7136E
                      - Validation failed when the database default values were set. See the associated message for more information.
     BMXAA4190E - Country NZ is not in the value list.
            /Exception>
         </detail>
</soapenv:Fault>
And the fault message in my ER service interface is stanadard datatype ExchangeFaultData, which is different from
the above. Is this the problem? Can I change the data type here to be the same as above?
Audit log in the RWB adapter engine.
Time Stamp Type Description
30.09.2011 15:10:57 Information MP: processing local module Localejbs/sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean
30.09.2011 15:10:57 Information SOAP: request message entering the adapter with user J2EE_GUEST
30.09.2011 15:10:57 Information SOAP: completed the processing
30.09.2011 15:10:57 Information SOAP: sending a delivery error ack ...
30.09.2011 15:10:57 Information SOAP: sent a delivery error ack
30.09.2011 15:10:57 Error MP: exception caught with cause
com.sap.engine.interfaces.messaging.api.exception.MessagingException
30.09.2011 15:10:57 Error Adapter Framework caught exception: null
30.09.2011 15:10:57 Error Delivering the message to the application using connection
SOAP_http://sap.com/xi/XI/System failed, due to:
com.sap.engine.interfaces.messaging.api.exception.MessagingException.
30.09.2011 15:10:57 Information The message status was set to WAIT.
30.09.2011 15:10:57 Information The asynchronous message was successfully scheduled to be delivered at Fri Sep 30
15:15:57 NZDT 2011.

I tried changing it to both sync and async.
I have also provided fault message.
dont feel that you need to do above steps.
I have a
Sender Agreement
ideally you dont need a sender agreement (and a channel) for IDOC --> PI flow.
When I see the message content, the SOap document shows me the details about IDOC
this is fine...you may see fields as seen in EDI_DC40 of the IDOC...
How does the receiver know which service interface is it?
receiver need not know about the SI created in PI.
The Service Interface which I created in the ER is
different from the WSDL, Does this have to be same?
you should the WSDL (external definition) as the Request Message in your service interface.
Is there some setting/configuration required in PI for this to work?
nothing specific...AFAIK
I have set a receiver soap communication channel and provided the target URL like "http://xxx/services" and soap action
can you open the URL from Internet explorer...from your machine or from the machine which is in the same network as your PI server?
Things to check:
WSDL structure in PI and in target system is exactly the same.
does the target system require mesage in SOAP format (SOAP envelope - SOAP Header + SOAP body)?
target system is up and running?

Event Type: CLR20r3 Signature Problem: P4:mscorlib.dll P9:System.FormatException

Hello, I'm working on a C#.net app.This is a machine interfacing software , where we use it to control the machine by interacting with it through hardware.The software works fine on all the machines that we have in our company, but fails to open on client's machine.We have Windows XP, Windows 7 (32-bit as well as 64-bit) and the s/w just works smoothly with all of them.Tried checking event log and found this:Log Name: Application
Source : Windows Error Reporting
Date: 30/10/2014 3:07:59 p.m.
Event ID : 1001
Task Category : None
Level : Information
Keywords: Classic
User: N / A
Computer: Pro01PC14101401
Description:
Container 123123135 error type 22
Event Name : Event clr20r3 by Name: clr20r3
Answer: Not available Answer : Not available
CAB ID : 0
Signature of the problem:
P1: vms.exe
P2: 1.2.0.2
P3: 5413cdea
P4: mscorlib
P5: 2.0.0.0
P6: 53a12268
P7: c44
P8: 59
P9 : System.FormatException
P10 :
Attachments:
C: \ Users \ PRO01 \ AppData \ Local \ Temp \ WERB9F0.tmp.WERInternalMetadata.xml
These files may be available here:
C:\Users\Pro01\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_vms.exe_94a436e347f991c21f9b4ed832169b677b88870_0e18144f
Analysis symbol :
New search solution : 0
Report ID : 18edc5d1-603e - 11e4-90e2-74d435f64282
Report Status : 0PLEASE NOTE: THE OS is WINDOWS 7 and IS IN FRENCH LANGUAGE AT CLIENT'S MACHINE WHEREAS WE ARE USING ENGLISH VERSION IN OUR COMPANY. Will it create any problems OR can it be something else?Please Help.

@Niranjan_v ，
I forget to ask whether your client machine means only one machine have this error?
If you have the problem on a specific machine, then please use this tool
.NET
Framework Setup Verification Tool User's Guide - Aaron Stebner's WebLog - Site
Home - MSDN Blogs
Please run this tool and choose .NET Framework 3.5 from program list of the tool and give us the output of this tool. The last few lines will tell you whether the machine has installed .NET 3.5 successfully or not. If verification failed, try use sfc /scannow
to repair this system component.
If you have this problem on more than one client machine. Then you may need to check whether you missed some package on your client machine. Or there are some software prevent your application to install.
Regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Startup problems: I found in log 7 SMC kernel errors

Machine is intel iMac early2008 with the newest ver of Mavericks OSX. I have 4GB RAM, newely installed additional 2GB of the 4GB. Prior to Mavericks upgrade it had Snow Leopard. Disk Utility shows only OSX to be Snow Leopard rather than Mavericks. I had thought I may have installed 2 OSX of Mavericks when checking all files in sysem, but following several disk permissions verify and repair, several scans for duplicates, scans with iBoostup(since it was not much help I trashed it). Disk Permissions scan found this:
Warning: SUID file “usr/libexec/security_authtrampoline” has been modified and will not be repaired. (I am Unable to find anything on this)
Warning: SUID file “usr/libexec/authopen” has been modified and will not be repaired. (I found that this is to be ignored
I have searched for suggestions and have not found exactly what I am dealing with so will appreciate any and all suggestions..
When rebooting from ShutDown I am getting , after long time of grey screen, a dark gray file with a ? mark in the center of it. Also for some time now I get a System Error message from my Avast each time following it's scan.
When the ?file shows I have no chice but to unplug machine and after a while, usually overnight, plug it in and it boots just fine until the next reboot following shutdown. Before the Apple shows up on the screen there are random black pixls and dots on the gray screen. The pixls and dots began following the upgrade to Mavericks OS X then stoped for a while until 2 days ago.
I have reset the PRAM. I have done the following to reset the SCM several times and problems still persist with each Startup from the total Shutdown.
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
So inconvenient to do each time and very scarry for me. Please help and thank you so much.

Thanks Eric. I did uninstall Avast and reinstalled it. I did more checking of everything I could do once again.. The flashing gray ?File was Meteorologist I think when I checked Startup items. I had already checked iTunes as I do not have anything in it. When hilighted the Meteorologist was told it was not recognized. After checking it to not load at startup. I then worked on an item called Aviator with asociated dmg callet whitehat something or other. Tried earlier to remove it and could not. After running disk permissions the umteenth time I ws able to remove the Aviator dmg and the whitehat thingy.
I finally rebooted to Sfe Mode which was terrible. Everything was flashing all ove the place. I was able to check a few things as long as it did not require the use of internet. After all that I was ready to reboot again ans wala!!
On reboot there was no flashing ?file folder even though it did take a very long time for machine to load. I had to wait for everything to load when opening Safari and internet Website. I have spent from 10 AM to now working on this and I think it will be OK. Although machine seems to be using an unusual amount of the extra GB of memory I added yesterday. The APP and File Cache seems to be using much more memory that when I had only 3GB. This is very frusating for me. The only app I stil have that I added yesterday is the Apple easy duplicate finder. I hate to remove it since I had to pay for it.
I don't know what Avast will find next time it runs a scan. I tried to do a full scan but after over an hour I stopped it. Will save that for tonight.
Oh, I also ran a Software Update, nothing there. Might there be any hidden software that needs updating? Perhaps Java. I forgot to do that. BTW, the Avast! Uninstall link you posted did not work for me so I went directly to the site and hunted for uninstaller. Finally discovered that it is very easy, just open Avast Preference and click uninstall .BTW, the reset SMC, 15 sec was not long enough time for my machine, I pluggeg back in after 15 mins and still got the ? file of death so unplugged for 30 mins and finally it loaded for me.
Thank you for the reply and your interest.

System startup Problem grey screen is going regularly and automatically shutdown

Hi
kindly resolve us this problem urgently
error msg. :- System startup Problem grey screen is going regularly and automatically shutdown
thanks
Dhaval Oza

Use RECOVERY MODE.
Boot from another drive with a copy of OS X too is always good.
A Safe Boot at a minimum.

All of a sudden I'm getting a 'itunes.exe - system error It says the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem. I have tried to reinstall and still can't open itunes. help!

all of a sudden I'm getting a 'itunes.exe - system error It says the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem. I have tried to reinstall and still can't open itunes. help!

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Just started getting an APS Daemon.exe-System Error saying my MSVCR80.dll file is missing. I tried to reinstall itunes, but got another error message. Anyone having this problem or know how to fix it?

Just last 2 days started getting an APS Daemon.exe-System Error saying my MSVCR80.dll file is missing when booting up my PC with Windows 7. I tried to reinstall itunes, but got another error message. Anyone having this problem or know how to fix it?
I now see the message from tt2 and will try that. Thanks!

Read this:
MSVCR80.dll missing, cannot install iTunes

Firefox 4 vbc.exe System error - Programt can't start because mozsqlite3.dll is missing from your computer. Try reinstalling the program to fix this problem

Ever since I install Firefox 4 (4.0.1), every time I boot up my computer I get this system error
vbc.exe - System Error
The program can't start because mozsqlite3.dll is missing from your computer. Try reinstalling the program to fix this problem
I tried updating my plugins and tried reinstalling Firefox 4 but no good. The error doesn't seem to cause any problem but it's just extremely annoying seeing it pops up every time I turn on my computer. The error goes away if I reinstall Firefox 3.6
Here is a picture of it. Any help is appreciated!
[http://imageshack.us/photo/my-images/855/unledwbc.png/ link text]

hello.. to fix this problem.. just delate hkcu on start up..

System error type 41. Startup problem

Similar Messages

Maybe you are looking for