System error - User not authorized to access requested Info Object!
Hi, Experts,
I have a user ID begin with S***, but when I click some links, the following message shows:
"System error - User not authorized to access requested Info Object!"
How could I have authorization to see these links?
Thanks!
Lorrie
Hi Lorrie,
If you are a superuser, you should not get this error.
If not, you can not change any autohorizations.
Check it out. For your job, you have to be a super user.
Thanks,
Gordon
Similar Messages
-
Internal Error - User not authorized to use the gross profit module
We have a client who has a limited logistics license and just recently moved to 8.8. in the past he could deliver directly from a pick list but now he is getting an error "User not authorized to use the gross profit module". Is this something related to an authorization setting? Before the move this task was not an issue. Please advise.
Thank you.
ReneHi Gordon, one of our user just experienced the same problem in sales order.
In Form Settings he ticked "Display BP Catalog Number", and while he entered the catalog number he got the same error message.
I'm not sure what this has to do with the gross profit base method...maybe the fields "Gross profit" and "Gross profit base price"? Don't know where to set them up.
Thanks. -
ERROR : Application not authorized to access the restricted API
hello every body
I m doin an application related to mmapi and i have written a programm for capturing a live audio , but when i run this programm i get an error
"Application not authorized to access the restricted API"
i m fed up of debuggin it , i m not able to find ne solution , n i m stuck up . If ne one of u have got the smae proble m and have got ne solution pls tell me and pls help me
thanksThis could come when the midlet is not signed and gets installed as untrusted application.
Try signing the midlet using verising java object signing class 3 RSA certificate. Do not use DSA cert as it is not supported by wtk.
Regards,
Raja Nagendra Kumar,
C.T.O,
Offshore Excellence - J2ME
www.tejasoft.com -
Hi everyone,
it's probably just me but I have tried real hard to get a simple AnyConnect setup working in a lab environment on my ASA 5505 at home, without luck. When I connect with the AnyConnect client I get the error message "User not authorized for AnyConnect Client access, contact your administrator". I have searched for this error and tried some of the few solutions out there, but to no avail. I also updated the ASA from 8.4.4(1) to 9.1(1) and ASDM from 6.4(9) to 7.1(1) but still the same problem. The setup of the ASA is straight forward, directly connected to the Internet with a 10.0.1.0 / 24 subnet on the inside and an address pool of 10.0.2.0 / 24 to assign to the VPN clients. Please note that due to ISP restrictions, I'm using port 44455 instead of 443. I had AnyConnect working with the SSL portal, but IKEv2 IPsec is giving me a headache. I have stripped down certificate authentication which I had running before just to eliminate this as a potential cause of the issue. When running debugging, I do not get any error messages - the handshake completes successfully and the local authentication works fine as well.
Please find the current config and debugging output below. I appreciate any pointers as to what might be wrong here.
: Saved
ASA Version 9.1(1)
hostname ASA
domain-name ingo.local
enable password ... encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd ... encrypted
names
name 10.0.1.0 LAN-10-0-1-x
dns-guard
ip local pool VPNPool 10.0.2.1-10.0.2.10 mask 255.255.255.0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif Internal
security-level 100
ip address 10.0.1.254 255.255.255.0
interface Vlan2
nameif External
security-level 0
ip address dhcp setroute
regex BlockFacebook "facebook.com"
banner login This is a monitored system. Unauthorized access is prohibited.
boot system disk0:/asa911-k8.bin
ftp mode passive
clock timezone PST -8
clock summer-time PDT recurring
dns domain-lookup Internal
dns domain-lookup External
dns server-group DefaultDNS
name-server 10.0.1.11
name-server 75.153.176.1
name-server 75.153.176.9
domain-name ingo.local
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network LAN-10-0-1-x
subnet 10.0.1.0 255.255.255.0
object network Company-IP1
host xxx.xxx.xxx.xxx
object network Company-IP2
host xxx.xxx.xxx.xxx
object network HYPER-V-DUAL-IP
range 10.0.1.1 10.0.1.2
object network LAN-10-0-1-X
access-list 100 extended permit tcp any4 object HYPER-V-DUAL-IP eq 3389 inactive
access-list 100 extended permit tcp object Company-IP1 object HYPER-V-DUAL-IP eq 3389
access-list 100 extended permit tcp object Company-IP2 object HYPER-V-DUAL-IP eq 3389
tcp-map Normalizer
check-retransmission
checksum-verification
no pager
logging enable
logging timestamp
logging list Threats message 106023
logging list Threats message 106100
logging list Threats message 106015
logging list Threats message 106021
logging list Threats message 401004
logging buffered errors
logging trap Threats
logging asdm debugging
logging device-id hostname
logging host Internal 10.0.1.11 format emblem
logging ftp-bufferwrap
logging ftp-server 10.0.1.11 / asa *****
logging permit-hostdown
mtu Internal 1500
mtu External 1500
ip verify reverse-path interface Internal
ip verify reverse-path interface External
icmp unreachable rate-limit 1 burst-size 1
icmp deny any echo External
asdm image disk0:/asdm-711.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
object network obj_any
nat (Internal,External) dynamic interface
object network LAN-10-0-1-x
nat (Internal,External) dynamic interface
object network HYPER-V-DUAL-IP
nat (Internal,External) static interface service tcp 3389 3389
access-group 100 in interface External
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server radius protocol radius
aaa-server radius (Internal) host 10.0.1.11
key *****
radius-common-pw *****
user-identity default-domain LOCAL
aaa authentication ssh console radius LOCAL
http server enable
http LAN-10-0-1-x 255.255.255.0 Internal
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec ikev2 ipsec-proposal DES
protocol esp encryption des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal 3DES
protocol esp encryption 3des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES
protocol esp encryption aes
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES192
protocol esp encryption aes-192
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES256
protocol esp encryption aes-256
protocol esp integrity sha-1 md5
crypto ipsec security-association pmtu-aging infinite
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES
crypto map External_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map External_map interface External
crypto ca trustpoint srv01_trustpoint
enrollment terminal
crl configure
crypto ca trustpoint asa_cert_trustpoint
keypair asa_cert_trustpoint
crl configure
crypto ca trustpoint LOCAL-CA-SERVER
keypair LOCAL-CA-SERVER
crl configure
crypto ca trustpool policy
crypto ca server
cdp-url http://.../+CSCOCA+/asa_ca.crl:44435
issuer-name CN=...
database path disk0:/LOCAL_CA_SERVER/
smtp from-address ...
publish-crl External 44436
crypto ca certificate chain srv01_trustpoint
certificate <output omitted>
quit
crypto ca certificate chain asa_cert_trustpoint
certificate <output omitted>
quit
crypto ca certificate chain LOCAL-CA-SERVER
certificate <output omitted>
quit
crypto ikev2 policy 1
encryption aes-256
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 10
encryption aes-192
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 20
encryption aes
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 30
encryption 3des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 40
encryption des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 enable External client-services port 44455
crypto ikev2 remote-access trustpoint asa_cert_trustpoint
telnet timeout 5
ssh LAN-10-0-1-x 255.255.255.0 Internal
ssh xxx.xxx.xxx.xxx 255.255.255.255 External
ssh xxx.xxx.xxx.xxx 255.255.255.255 External
ssh timeout 5
ssh version 2
console timeout 0
no vpn-addr-assign aaa
no ipv6-vpn-addr-assign aaa
no ipv6-vpn-addr-assign local
dhcpd dns 75.153.176.9 75.153.176.1
dhcpd domain ingo.local
dhcpd option 3 ip 10.0.1.254
dhcpd address 10.0.1.50-10.0.1.81 Internal
dhcpd enable Internal
threat-detection basic-threat
threat-detection scanning-threat shun except ip-address LAN-10-0-1-x 255.255.255.0
threat-detection statistics access-list
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
dynamic-filter use-database
dynamic-filter enable interface Internal
dynamic-filter enable interface External
dynamic-filter drop blacklist interface Internal
dynamic-filter drop blacklist interface External
ntp server 128.233.3.101 source External
ntp server 128.233.3.100 source External prefer
ntp server 204.152.184.72 source External
ntp server 192.6.38.127 source External
ssl encryption aes256-sha1 aes128-sha1 3des-sha1
ssl trust-point asa_cert_trustpoint External
webvpn
port 44433
enable External
dtls port 44433
anyconnect image disk0:/anyconnect-win-3.1.02026-k9.pkg 1
anyconnect profiles profile1 disk0:/profile1.xml
anyconnect enable
smart-tunnel list SmartTunnelList1 mstsc mstsc.exe platform windows
smart-tunnel list SmartTunnelList1 putty putty.exe platform windows
group-policy DfltGrpPolicy attributes
vpn-tunnel-protocol ikev1 ikev2 l2tp-ipsec ssl-client ssl-clientless
webvpn
anyconnect profiles value profile1 type user
username write.ingo password ... encrypted
username ingo password ... encrypted privilege 15
username tom.tucker password ... encrypted
class-map TCP
match port tcp range 1 65535
class-map type regex match-any BlockFacebook
match regex BlockFacebook
class-map type inspect http match-all BlockDomains
match request header host regex class BlockFacebook
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 1500
id-randomization
policy-map TCP
class TCP
set connection conn-max 1000 embryonic-conn-max 1000 per-client-max 250 per-client-embryonic-max 250
set connection timeout dcd
set connection advanced-options Normalizer
set connection decrement-ttl
policy-map type inspect http HTTP
parameters
protocol-violation action drop-connection log
class BlockDomains
policy-map global_policy
class inspection_default
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect dns preset_dns_map dynamic-filter-snoop
inspect http HTTP
service-policy global_policy global
service-policy TCP interface External
smtp-server 199.185.220.249
privilege cmd level 3 mode exec command perfmon
privilege cmd level 3 mode exec command ping
privilege cmd level 3 mode exec command who
privilege cmd level 3 mode exec command logging
privilege cmd level 3 mode exec command failover
privilege cmd level 3 mode exec command vpn-sessiondb
privilege cmd level 3 mode exec command packet-tracer
privilege show level 5 mode exec command import
privilege show level 5 mode exec command running-config
privilege show level 3 mode exec command reload
privilege show level 3 mode exec command mode
privilege show level 3 mode exec command firewall
privilege show level 3 mode exec command asp
privilege show level 3 mode exec command cpu
privilege show level 3 mode exec command interface
privilege show level 3 mode exec command clock
privilege show level 3 mode exec command dns-hosts
privilege show level 3 mode exec command access-list
privilege show level 3 mode exec command logging
privilege show level 3 mode exec command vlan
privilege show level 3 mode exec command ip
privilege show level 3 mode exec command failover
privilege show level 3 mode exec command asdm
privilege show level 3 mode exec command arp
privilege show level 3 mode exec command ipv6
privilege show level 3 mode exec command route
privilege show level 3 mode exec command ospf
privilege show level 3 mode exec command aaa-server
privilege show level 3 mode exec command aaa
privilege show level 3 mode exec command eigrp
privilege show level 3 mode exec command crypto
privilege show level 3 mode exec command ssh
privilege show level 3 mode exec command vpn-sessiondb
privilege show level 3 mode exec command vpnclient
privilege show level 3 mode exec command vpn
privilege show level 3 mode exec command dhcpd
privilege show level 3 mode exec command blocks
privilege show level 3 mode exec command wccp
privilege show level 3 mode exec command dynamic-filter
privilege show level 3 mode exec command webvpn
privilege show level 3 mode exec command service-policy
privilege show level 3 mode exec command module
privilege show level 3 mode exec command uauth
privilege show level 3 mode exec command compression
privilege show level 3 mode configure command interface
privilege show level 3 mode configure command clock
privilege show level 3 mode configure command access-list
privilege show level 3 mode configure command logging
privilege show level 3 mode configure command ip
privilege show level 3 mode configure command failover
privilege show level 5 mode configure command asdm
privilege show level 3 mode configure command arp
privilege show level 3 mode configure command route
privilege show level 3 mode configure command aaa-server
privilege show level 3 mode configure command aaa
privilege show level 3 mode configure command crypto
privilege show level 3 mode configure command ssh
privilege show level 3 mode configure command dhcpd
privilege show level 5 mode configure command privilege
privilege clear level 3 mode exec command dns-hosts
privilege clear level 3 mode exec command logging
privilege clear level 3 mode exec command arp
privilege clear level 3 mode exec command aaa-server
privilege clear level 3 mode exec command crypto
privilege clear level 3 mode exec command dynamic-filter
privilege cmd level 3 mode configure command failover
privilege clear level 3 mode configure command logging
privilege clear level 3 mode configure command arp
privilege clear level 3 mode configure command crypto
privilege clear level 3 mode configure command aaa-server
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:41a021a28f73c647a2f550ba932bed1a
: end
Many thanks,
IngoHi Jose,
here is what I got now:
ASA(config)# sh run | begin tunnel-group
tunnel-group DefaultWEBVPNGroup general-attributes
address-pool VPNPool
authorization-required
and DAP debugging still the same:
ASA(config)# DAP_TRACE: DAP_open: CDC45080
DAP_TRACE: Username: tom.tucker, aaa.cisco.grouppolicy = DfltGrpPolicy
DAP_TRACE: Username: tom.tucker, aaa.cisco.username = tom.tucker
DAP_TRACE: Username: tom.tucker, aaa.cisco.username1 = tom.tucker
DAP_TRACE: Username: tom.tucker, aaa.cisco.username2 =
DAP_TRACE: Username: tom.tucker, aaa.cisco.tunnelgroup = DefaultWEBVPNGroup
DAP_TRACE: Username: tom.tucker, DAP_add_SCEP: scep required = [FALSE]
DAP_TRACE: Username: tom.tucker, DAP_add_AC:
endpoint.anyconnect.clientversion="3.1.02026";
endpoint.anyconnect.platform="win";
DAP_TRACE: Username: tom.tucker, dap_aggregate_attr: rec_count = 1
DAP_TRACE: Username: tom.tucker, Selected DAPs: DfltAccessPolicy
DAP_TRACE: Username: tom.tucker, DAP_close: CDC45080
Unfortunately, it still doesn't work. Hmmm.. maybe a wipe of the config and starting from scratch can help?
Thanks,
Ingo -
Java System error: SSO not authorized: authorization Failed
Hi,
I am getting the following error while opening a BEx report designer or WAD and iam unable to design any report or create a dashboard
"Java System Error: Call to FM BICS_CONS_GET_VIEW_DEF_J_PROXY to ProdId ASEP_PORTAL_E01 on host ASEP wiht SSO not authorized . Authentication Failed"
System Details:
BI and EP are installed in Same server
BI Config:
softwarwe component : SAP_BW
Release : 700
Patch Level: 0021
Support Pack : SAPKW70021 (SAP NetWeaver BI 7.0)
EP config:
SAP NetWeaver BI 7.0 SP Level 15
Please suggest .It seems that something wrong in integration between JAVA Stack (from where you accessing BW report) a BW back end system. Try to run Support Desk Tool:
http://<your_server>:<port>/irj/servlet/prt/portal/prteventname/HtmlbEvent/prtroot/com.sap.ip.bi.supportdesk.default
to see what is wrong in this area. -
Having the tab to be not visible for users not authorized to access it
Hello,
I've set up an authorization scheme to certain tabs. However, users who are not allowed to access them still have the tabs visible to them. When they click on the tab, they are redirected to a page that contains the error message that they are not authorize to view the page. Is there a way of not making the tabs available at all to those who are not authorize to use it? thanksHave you set the same authorization scheme to the tab as you set to the page which is started by the tab?
If so, you should not see the tab.
Fred. -
User not authorized for message processing
Hi,
I have a SM59 connection from SAP PI --> SAP R3.
Targethost sapr3T.mydomain.
Path prefix: /sap/xi/engine?type=entry
Process: From PI send a message to R3 (scenarie is a Server Proxy...)
User: PIPROXY has Role SAP_XI_APPL_SERV_USER
This is not enought I get error "User not authorized for message processing" when trying the connection from my PI server. (I tried with SAP_ALL and then it works)
What would be the right user role for this operation ?
Br,
MartinHi all,
I have the same problem in a XI -> BW scenario (Abap proxy).
I get error "User not authorized for message processing" when try to send message from PI to BW.
(I tried with SAP_ALL and then it works)
User: PI1REMOTE has Role SAP_XI_APPL_SERV_USER and SAP_XI_IS_SERV_USER
What would be the right user role for this operation ?
Thanks
Daniele -
System error: RSDRC / FORM AUTHORITY_CHECK USER NOT AUTHORIZED 0SAL_DS01 0S
Hello
I have a big problem, I a have active the ODS 0SAL_DS01 with the update rule 0CRM_SALES_ACT_1.
I have upload the data without problem.
When I want to see the data I have this message :
Your user master record is not sufficiently maintained for object Sales Org
System error: RSDRC / FORM AUTHORITY_CHECK USER NOT AUTHORIZED 0SAL_DS01 0SAL_DS01
Can someone help me please?
Regards.
FarchidHi Farchid,
You need auth for the SalesOrg Auth object that is securing this ODS. In RSSM, you can enter 0SAL_DS01 in the check for InfoProvider box and then click display. You should see a check mark against this auth object for SalesOrg. Makre sure that you have the related role assigned to your ID.
Hope this helps... -
Over the past year, when using iTunes Radio on my iMac, I keep getting the following message: "We could not complete you iTunes Store request. You are not authorized to access the requested resource. There was an error in the iTunes Store. Please try again later." This only happens on my Mac, not on my iPad.
I looked at the Apple Support Communities and the most common workaround is to click on Store/Authorize this Computer. After entering my Apple ID password, the response is "This computer is already authorized." Well, duh. But at least the iTunes Radio starts to work for awhile.
There are other workarounds, but none is easier than the one I just mentioned. But my question is, when will Apple fix this problem? It's just annoying.
ClayHello there, TaylorGraphics.
Some users have seen resolution to this issue by logging out of the iTunes Store and then back in. The following Knowledge Base article provides a reference on how to do that:
Using an existing Apple ID with the iTunes Store, Mac App Store, and iBooks Store
http://support.apple.com/kb/ht2589
Use your Apple ID with the iTunes Store
Open the latest version of iTunes.
Choose Store > Sign In.
Enter your Apple ID and password and click Sign In.
Click Review when asked to review your information.
Enter your billing information.
Click Continue after you enter your credit card and billing information. You can remove or edit your credit card information at any time. Learn more about updating your iTunes Store account information.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Exception Pull packages failed - user is not authorized to access ICE path
Hi experts,
I'm facing with the follow exception when I index content from the server repostory:
#1.5 #CA29D00050030076000000000010306C00049216F4C97794#1286527200622#com.sapportals.wcm.service.ice.wcm.subscriber.ICESubscriber#sap.com/irj#com.sapportals.wcm.service.ice.wcm.subscriber.ICESubscriber#global_user#0##n/a##a35fe704d2b711df90a000002edfd0ee#Thread[ThreadPool.Worker4,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error##Plain###Pull packages failed - java.io.IOException: User 'xyz' is not authorized to access http://myserver:57800/irj/servlet/prt/portal/prtroot/com.sap.km.cm.ice
at com.sapportals.wcm.service.ice.wcm.ICEHttpConnection.checkStatus(ICEHttpConnection.java:290)
at com.sapportals.wcm.service.ice.wcm.ICEHttpConnection.getOutput(ICEHttpConnection.java:165)
at com.sapportals.wcm.service.ice.wcm.subscriber.ICESubscriber.pullPackage(ICESubscriber.java:149)
at com.sapportals.wcm.service.ice.wcm.subscriber.ICESubscriber.run(ICESubscriber.java:101)
at com.sapportals.wcm.service.scheduler.SchedulerEntry.run(SchedulerEntry.java:174)
at com.sapportals.wcm.service.scheduler.crt.PoolWorker.run(PoolWorker.java:108)
at java.lang.Thread.run(Thread.java:770)
Can you help me handling with this exception please?
With best regards
João MacedoAny help?
Thank you
Best regards
João Macedo -
User domain\SPFservice is not authorized to perform request using authentication type Negotiate
Hi,
I have installed WAP/SPF in the same domain via express installation. The SPF domain service account is sysadmin on the SPF database. The SPF domain service account is running as identity in IIS application pool. I have registered SPF in
WAP via SPFcomputeraccount\LocalSPFaccount. The LocalSPFaccount is member of the 4 local groups created by the SPF setup. The domain SPF service account is member of the VMM administrators.
When a new tenant want to subscribe to a hosting plan I get an error "One or more errors occurred while contacting the underlying resource providers. The operation may be partially completed. Details: Failed to create subscription".
When I look in the eventviewer of the SPF server in ManagementODataService, I can see "User domain\SPFservice is not authorized to perform request using authentication type Negotiate".
SPF/VMM are both on the latest update rollup. The VMM console is also updated on the SPF server.
I can successfully reproduce the troubleshooting steps from http://blogs.technet.com/b/privatecloud/archive/2013/11/08/troubleshooting-windows-azure-pack-spf-amp-vmm.aspx.Hi,
During the install it is also asking you to specify groups during the installation (4 x) Is the user you specified als spf runas account also member of those group in the AD?
So you have 4 groups created on the local box by the installation. But also 4 specified during the installation. Check if the account is member of those group(s) as well, reboot the spf and you should be up and running.
Best regards, Mark Scholman. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Getting error message " You are not authorized to access the migration tool "
One of the users is noticed with error message " You are not authorized to access the migration tool " in SAP Cloud for Customer tenant. thanks
Hello Raj,
It seems that this user does not have proper authorization to perform Data Migration.
You need to go to the WorkCenter View Assignment for this user under his access rights & need to assign him the workcenter "Business Configuration" & under it, also assign him relevant access to Data Migration.
This shall fix the issue & the user shall not get this error while trying to perform Data Migration.
Steps:
1. Go to Workcneter: "Application and User Management => Business Users => Seerach for the suer who gets this error => Edit-> Access Rights => Click on Workcenter view Assignment tab & assign the above mentioned worokcenter access and save."
Let me know for any further queries.
BR
Ankur -
I can't get iTunes Radio to work. I get this error message, even when I'm signed in to iTunes:
"We could not complete your iTunes Store request. You are not authorized to access the requested resource. There was an error in the iTunes Store. Please try again later."
What the hey?
Anyone?
thanks!
PS: I'm running 10.8.5 but for some reason this website won't let me display that and keeps changing it to 10.8.2.Relaunched iTunes a few times, signed out, signed in, and it's finally working now. Good grief. But all's well.
-
Watch ESPN - User not authorized error
I'm a U-200 subscriber, I get all of the ESPN channels on u-verse. I recently moved to Kansas City from Chicago, and since the move I haven't been able to access Watch ESPN online. I've tried from my laptop, phone and two different tablets. I just get the User Not Authorized error. Does anyone know how to fix this? I don't have time to spend an hour on hold waiting for tech support.
I'm a U-200 subscriber, I get all of the ESPN channels on u-verse, and also BTN, NBCSN, etc.. I recently upgraded from Internet U-verse only to U-200 and Internet, switching from DirecTV. Unfortunately, when I try to use TV network apps on my iPhone and iPad (like ABC, Watch ESPN, NBC Sports Live Extra, Fox, BTN2Go, etc), after selecting ATT U-verse as my participating TV provider and entering my U-verse credentials, I just get the User Not Authorized error from every single app. Does anyone know how to fix this? I don't have time to spend an hour on hold waiting for tech support, and I am about to switch back to another provider after only three days with U-verse. Examples of errors: NBC Sports Live Extra: "We're Sorry it looks like you're not a subscriber to this channel. Please contact you're provider."ABC: "Error code:400-1. Unfortunately, you cannot access this content. Please contact your TV provider for further assistance."BTN2Go: "User is not authroized to this content."Watch ESPN: "Unable to play video. You are not authorized to play this content. Please contact your provider." Can someone please help??? Talked with two techs who have basically thrown up their hands saying they cannot help. Update on 6/9: So I sent a PM to ATTU-verseCare and quickly got a response from SadathCS. He called me and noticed that when I upgraded from Internet Only Uverse, the database they use to authenticate TV subs on these apps was not properly synched after my upgrade to the TV/Internet account bundle. He forced the sync and it is now working. Thanks SadathCS! issue solved.
-
You are not authorized to access the request resource
I just updated my iMac to the new OS Mavericks, and when I attempt to access the itunes radio, where I have my radio stations created, and I attempt to play them it returns this message: We could not complelte your iTunes Store request. You are not authorized to access the requested resource. Is this an issue with the new OS or is it an issue with iTunes working with the OS. Any suggestions on how to fix this issue so I can access the radio would be helpful.
ThanksHello there, TaylorGraphics.
Some users have seen resolution to this issue by logging out of the iTunes Store and then back in. The following Knowledge Base article provides a reference on how to do that:
Using an existing Apple ID with the iTunes Store, Mac App Store, and iBooks Store
http://support.apple.com/kb/ht2589
Use your Apple ID with the iTunes Store
Open the latest version of iTunes.
Choose Store > Sign In.
Enter your Apple ID and password and click Sign In.
Click Review when asked to review your information.
Enter your billing information.
Click Continue after you enter your credit card and billing information. You can remove or edit your credit card information at any time. Learn more about updating your iTunes Store account information.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.
Maybe you are looking for
-
DBCA error ORA-01034 oracle not available on Windows server 2008 r2 64
Hi All, I have installed oracle 11.2.0.1 on my system having OS Windows server 2008. Then after that through DBCA i was creating the database during that i got ORA-01034 oracle not available. if any body know how to resolve it please reply me. Thanks
-
Selection Markers not appearing in QTPro 7.5.5??
Some time after installing QTPro 7.5.5, I just noticed that my in/out selection markers are no longer appearing. And no, the "hide selectors.." option is not checked in prefs, although I tried toggling that on and off but nothing changed. I'm able to
-
Firefox 3.6.21 does not recognize key remappings by AutoHotKey.
Hello, I have been remapping the left-Windows and left-Alt keys to the mouse buttons using AutoHotKey and to the best of my recollection they were working fine in Firefox. Recently I noticed that the remappings are no longer working in Firefox, 3.6.2
-
Using JDev 10.1.2.1.0 (Build 1913) on XP. When I view the Property Inspector, it's empty. Not just the values, but the entire window. The name of the selected object is in the title bar, and the 7 icons are present, but there is no information in the
-
Adobe Brigde CC down after installing 'output' module.
I've tried to install the Adobe Bridge CC output module (Install Adobe Output Module) on my MacBook pro but after that the program won't open / work any more I've already removed the extra installation and reinstalled Adobe Bridge CC several times, b