System error when installing new itunes update

Cannot install latest itunes update...?

thats a bit confusing, it's a red message but it says warning
I tried the other programm mentioned above but still I get the same warning.
in the report it's clear that the font installed is not used in the output on the screen. I can add the font in my sapscript but the output is not the font specified.
the font installed is Lucida sans EF which is part of the 'company' style but till now not yet implemented in SAP.
oops it's working now, new learning moment for me. never look at preview on screen for the kind of font you want to see , thanks for the input and confirmation of the procedure
Message was edited by:
        A. de Smidt

Similar Messages

  • Error when installing new iTunes, looking for administrator - but I am the administrator?

    error 2426 appears, saying please log on as admin.  I am the admin!

    Hi,
    Weird thing about outlook 2010 which I discovered is that it runs in less than an administrators permission. You have to right click on the icon and look inside to make it run as an administrator and you can make that permanent but it has some drawbacks. I assume that you are trying to delete or do something with the contacts that icloud couldn't sync. When you try to move them or delete them it says you don't have the permission. I ws working on another problem when I learned this by trial and error. Remember that Outlook can also run in safe mode by itself.
    Anyway I don't know if that will help.
    GR

  • Installed new itunes update and now it will not sync with outlook

    installed new itunes update and now it will not sync with outlook. it says it will only do it through the Icloud. How can i change it

    Hello xtremejoe
    I find that changing some settings in your syncing options will get syncing working again, like enabling Manually manage music and videos.
    iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
    http://support.apple.com/kb/PH12313
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • IPod wont sync to laptop after installing newer itunes update

    I installed an itunes update and after restarting my computer it would not sync at all. Also when plugged into my computer it no longer showed up as "Jims iPod" but just "Apple iPod" under devices where i cannot edit it in anyway. I uninstalled iTunes and re-installed it then getting the message " iTunes Library.itl cannot be read because of a newer version of iTunes" i did some tinkering (renamed itunes library as library.itl" and iTunes was able to open again however still couldnt sync. WHAT DO I DO? I have tried everything and its not appearing in iTunes at all.

    Try:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

  • Cannot install new itunes update windows 7

    I get the following error message when I try to update to the new iTunes version:
    "The feature you are trying to use is on a network resource that is unavailable.
    Click OK to try again or enter an alternate path to a folder containing the installation package 'iTunes64.msi' in the box below.
    Use source:
    C:\Users\****\App Data\Local\Apple\Apple Software Update\iTunes64.msi"
    ****=My name
    I am trying to install the latest version and have been receiving the same error message for about a month. After that message this one pops up:
    "The path C:\Users\****\App Data\Local\Apple\Apple Software Update\iTunes64.msi" cannot be found. Verify that you have access to this location and try again, or try to find the installation package 'iTunes64.msi' in a folder from which you can install the product iTunes"
    And then this one:
    "Errors occurred while installing the updates. If the problem persists, choose Tools > Download Only and try installing manually."
    When I use Download Only and try to install manually as suggested, I get this message:
    "The older version of iTunes cannot be removed. Contact your technical support group."
    Can anyone please help me resolve this?
    Thank you!

    "The feature you are trying to use is on a network resource that is unavailable.
    Click OK to try again or enter an alternate path to a folder containing the installation package 'iTunes64.msi' in the box below.
    Use source:
    C:\Users\****\App Data\Local\Apple\Apple Software Update\iTunes64.msi"
    ****=My name
    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Error when installing new license key

    Hi, I am trying to install the license key for the Netweaver 7.01 Basis Test system with saplicense -install ifile=NSP.txt and am getting the following error message:
    SAPLICENSE (Release 701) ERROR ***
         ERROR: Can not set DbSl trace function
         DETAILS: DbSlControl(DBSL_CMD_IMP_FUNC_SET) failed with return code 20
                         dbms_type = <db-type> (e.g. ora)
                         DIR_LIBRARY = <path to db-dll> (e.g. usr/sap/SID/SYS/exe/run)
    Thanks for any help you can give.
    The original license expired and I cannot log into the system any more so I can't use SLICENSE.

    Hi,
    Have you got the SAP License key by providing its relative proper Hardware key ? if its required get a new SAP License key again with its relative hardware key at SAP Service Market Place, , and apply it again by login with sap* user in client.
    The variables DIR_LIBRARY & dbms_type are set correctly for the user Under which you are installing SAP license? 
    Have you tried the same activity with new Saplicense executable for 701 release ? Download new saplicense from SMP and try again.
    Also do this at last.... Set your system date back to a date when the sap license was valid.... then reStart the system, log on to SAP client, go to transactoin SLICENSE, apply the new license using license file, verify the license application & then log off, change system date back to current date, and re-start sap system. The same activity you can do at command level also.
    Regards,
    Bhavik G. Shroff

  • Internal system error when installing directx on windows 7

    i download dxwebsetup.exe from microsoft site and when i try to install it it give s me in error: an internal system error is produced.consult the files DXError.log and DirectX.log from the Windows file.can you please help me?

    Hi,
    Did you require an earlier version of DirectX?
    Firstly please run System Restore to roll back to previous time point , and then follow this install it again in Clean boot for test.
    How to install the latest version of DirectX
    https://support.microsoft.com/kb/179113/?wa=wsignin1.0
    If the issue persist, upload the DXError.log and DirectX.log file to OneDrive and share the link here in order we help you find out the culprit.
    Karen Hu
    TechNet Community Support

  • Disk read error when installing new OS on S10-2

    Hello all.
    I`ve looked thru this forum and knowledge base, but couldn`t find an answer so I`m appealing to the Lenovo community.
    I recently purchased a S10-2 netbook in Mexico. Unfortunetely it`s in Spanish and I need English.(I`m writing a computer book and I need screen captures in English.) I don`t have a phone to call tech support or an external CD drive. I`ve sucessfully setup a dual boot with Ubuntu via USB flash drive.  First I tried installing from a XP disk image (XP Pro and XP Home) using Power Iso, but when it rebooted, I received a disk read error. Then I tried extracting the installation files to the D-drive, rebooting to a command prompt, and installing directly. After going thru the initial setup screens, it went thru the motions of copying the installation files to the system, but when it rebooted, once again I received a disk read error.
    Any help would be greatly appreciated.
    Thanks.
    Garry

    run disk check before installing anything, you may have dead bad sectors on your hard disk.
    if it's possible, remove your hard disk and install it under other computers.

  • N8 System Error when installing apps

    I'm continously getting a 'System error' message whenever I try to install some apps, such as Nokia Battery Monitor, Youtube Downloader and fMobi. This occurence only began recently after updating to Symbian Anna. I've installed many other apps and can still install other apps but I seem to have a problem with a select few. I have attempted to uninstall and reinstall the apps and also done a delete and restore after backup but still no change.
    Thanks in advance for any suggestions 
    Nokia N8 - Symbian Anna  - 059C5Q8 - Unbranded - UK

    I did the update yesterday via OVI.........
    I get a "system error" message every time the phone starts
    Can't get into my contacts at all, the timer pops up and then goes away! (There are 260 in memory and SPB Shell has access!!!)
    Conversations won't run, says not available feature
    Can't install the beta labs sleeping screen
    Took multiple attempts to install OVI chat
    All I want is a working phone!  It was working better before the damn update!
    It looks like there's something missing after the update 
    Tried *#7370# for return to factory defaults, no change
    Tried re-installing Anna, no change
    Anyone else having these issues too? Any solutions you can think of?
    This is a UK UNBRANDED N8 bought directly from Nokia in Finland
    Software version 022.014
    Custom version 022.014.226.06
    N8 (059C5Q5) now running Belle V111.030.0609
    N8 (059C5Q5) previously running Anna V25.007
    Previous [N97, N95 8Gb, N95, N82]
    If in doubt, RTFM! (Read The F***ing Manual)

  • PROBLEMS INSTALLING NEW ITUNES UPDATE

    Hello
    I connected my ipad today and downloaded the latest itunes update. When i unplugged the ipad and tried to open itunes on the desktop, a dialogue box popped up which said that itunes hadn't installed properly, the msvcr80.dll was missing and to uninstall then reinstall itunes.
    I did this and it says the same thing?  Since this happened its affecting other programs on my PC
    Any ideas?

    The most complete instructions for resolution of the iTunes issues are found in the user tip: https://discussions.apple.com/docs/DOC-6562

  • HT201210 Has anyone else received a -39 error since the new itunes update?

    Since the latest itune update, I have completely lost all my uploaded audio books.  When I try to restore from my ipod I get error -39.  Has anyone else had this issue?

    I have no idea which password you mean. Your phone's password? Your Apple ID password? Your iTunes Store password? The Backup encryption password? It is impossible not to have an Apple ID password or iTunes Store password. They are usually the same, but don't have to be.
    If you need the backup encryption password it is cretain that you entered it, but it may have been a long time ago. It is prompted the first time you back up after checking "encrypt backup" in iTunes, and can also be required by your IT Administrator if you have a corporate MS Exchange email account on your phone. It is never again prompted until you need to restore from the encrypted backup.

  • "Access Denied" System Error When Installing Software

    I reintalled the Mac OS 10.4.6 and preserved my users data. Now every time I try to install program, I get the following message: Sorry, the operation could not be completed due to a system error: (Access Denied).
    I tryed repairing the permissions. Any suggestions?
    Thanks in advance,
    Andrew
    iMac 1.8 GHz Power PC   Mac OS X (10.4.6)  
      Mac OS X (10.4.5)  

    Hi Andrew, "Get Info" (command-i) on your Applications folder and turn the disclosure triangle on "Ownership & Permissions" be sure you can "read & write" and that the owner (click the lock to open) is "system" with "read & write" access. Group is "admin" with "read & write" access.
    EDIT: Also, check Permissions inside your Home Folder
    • Navigate to YourHome/Library.
    • Get Info (Command - i) on folders for apps you are having problems with.
    • Open the "Ownership & permissions" disclosure triangle.
    • Make sure you are the owner, with "read and write" access.
    • Click on "apply to all"
    • If this is correct, open the "Applications Support" folder and do the same procedure (Command+I) for the folders with the names of the applications you are having trouble with.
    -mj
    [email protected]

  • "You must restart your system" error when installing Tiger on a new drive

    While trying to install Mac OS 10.4 from the install DVD the install stops during the "Basic Install ..." phase and I get a gray screen that says "You must restart the system by pressing the power button ....." shown four different languages. I restart installation over and over, it never gets past that first section. Gray screen, panic stop.
    I installed a new 200 GB Maxtor DiamondMax Ultra ATA/100 hard drive in my system. The system already had a 120 GB Maxtor. The 200GB is configured as the master and the 120GB as the slave. I have a new SIIG Ultra ATA/133 2 Channel PCI Interface (https://eshop.macsales.com/item/SIIG/SCMP4A12/) also installed.
    Here's my configuration.
    Power Mac G4 (AGP graphics) 1GB RAM, Mac OS 10.4.8
    - SIIG Ultra ATA/133 2 Channel PCI Interface
    - IOGEAR Hi-Speed USB 2.0 / FireWire 400 (1394A) Combo PCI Card
    - MAXTOR STM3200820A (200 GB drive, master)
    - MAXTOR 6B120P0 (120 GB drive, slave)
    I tried disconnecting the 120GB hard drive, leaving just the 200 GB on the bus and I get the same gray screen a few seconds into the basic OS install. Tried removing the IOGEAR USB 2.0 card, same message. Since Mac OS X was originally installed on the 120GB, I can restart Mac OS 10.4.8 from that drive and use that drive. Once restarted on the 120GB drive I see the 200 GB drive, Disk utilities see it just fine, drive reports no error in the Disk Utility. The 200 GB disk even formats, I see it on my current MAC OS 10.4.8 as the second drive. I just want to get Mac OS installed on the 200 GB.
    If you have seen this gray screen before installing on a 200 GB Maxtor or have any insight I would be most appreciated.
    PowerMac G4 (AGP Graphics) Mac OS X (10.4.8) SIIG Ultra ATA/133 2 Channel controller, 200GB Maxtor

    Hi Frank,
    With all that additional third party hardware it will be difficult to get a proper installation. You can either take out ALL 3rd-party hardware (just leave the 200 GB hard disk in there, but also take out the 120 GB) or you can simply clone the system from the 120 GB disk to the 200 GB disk. You can do that with utilities such as Carbon Copy Cloner.
    If this answered your question please consider granting some stars: Why reward points?

  • Error 2234 when installing latest itunes update on Windows 7

    How do I clear error 2234 so latest update can be installed with Windows 7

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • Unable to install new itunes update

    i am unable to sync my phone as my mac requires new version of itunes, but when i try to install it says i have the lastest version. can anyone advise what i can do to install the latest version?

    Hello turley00
    Check to make sure that your computer meets the system requirements for the latest version of iTunes which is running OS X version 10.6.8 or later. You can check to see what operating system you are running by going to the drop down menu  > About This Mac. If you are not running at least 10.6 or higher then you will need to upgrade your operating system. I have provided a link to get that upgrade.
    Download iTunes
    http://www.apple.com/itunes/download/
    Mac OS X 10.6 Snow Leopard
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    Regards,
    -Norm G.

Maybe you are looking for