System error with 64MB MMC for 6680

I have had my phone for six months and all of a sudden the MMC has packed in. It works in my wifes phone but when it goes in mine it reads system error and i cant access any saved files. I've only used 18MB so it cant be full. could it be a prob with my phone?
Any help appreciated
Richard

Tools -> Memory -> Options -> Format Mem. card.
If you are getting a system error you may have to format the mmc in your wife's phone, but I would try it in yours first.
dmz

Similar Messages

  • SYSTEM ERROR:NO Posted data for 5_CPR_EXTID 5(INCLUDE LCATS_ITSF 10)

    Hello Experts,
    CAN you please help me Regarding this error ,its very urjent for me.
    The problem is we are not able to create timesheet through ESS CATW transaction. In the below the link to the ESS Create Time sheet CATW is giving. Use the link to enter the ESS timesheet. Ignore all columns and use only A/A column and give any leave type.  When we enter the timesheet with A/A any vacation type and give number of hours and when we try to save or save and release button it gives a error message and it locks the user.
    The error message it gives is :
    <b>SYSTEM ERROR:NO Posted data for 5_CPR_EXTID 5(INCLUDE LCATS_ITSF 10)</b>
    Please Help me ....
    Thank you and regards,
    Durga.K

    Hi Durga,
    We have exactly the same error. Were you able to fix this? Any help is appreciated.
    Thanks,
    Doug

  • " SYSTEM ERROR" with ERROR CATEGORY: Message and ERROR ID : GENERAL

    HI all
    I m doing JDBC -> XI -> SOAP -> XI -> FILE ( XML) scenario .I have implemented it using  BPM .
    But ,In MONI , i am getting a "SYSTEM ERROR " with "ERROR CATEGORY : MESSAGE" and "ERROR ID : GENERAL" .and 
    One thing more is there my all adapters are active (JDBC,FILE) in runtime workbench but SOAP adapters i am not able to see it there as its services are not defined in there .Is this problem is because SOAP adapters are not defined in runtime workbench ?

    Hi Colin
    I are using SP 3.0
    I have checked the Communication channel monitoring and Adapter monitering also but in mine case when i want to see the SOAP adapter in adapter monitoring , the SOAP ICON is disabled there ,so i am not able to see whats the status of my SOAP adapter i have used in my scenario
    Thanks and Regards
    Abhishek

  • System error: NO posted data for 4_CPR_OBJGEXTID 4 (Include LCATS_ITSF10)

    Dear experts!
    I use internet service transaction catw in release 6.0 and the following error occurs:
    System error: NO posted data for 4_CPR_OBJGEXTID 4 (Include LCATS_ITSF10) .
    Thank you in advance!
    Vana Sounta

    CATw is not supported in ECC 600 , You need to use new service of CATS, called record working time
    Please read the note 870126 and also refer help.sap.com about record working time

  • System error: NO posted data for 8_CPR_EXTID 8 (Include LCATS_ITSF10)

    Hi Exters
    I am getting error like this System error: NO posted data for 8_CPR_EXTID 8 (Include LCATS_ITSF10) .Can anyone help me.
    Thanks & Regards
    Sandya

    Hi !
    I have the same error "System error: NO posted data for 4_CPR_OBJGEXTID 4 (Include LCATS_ITSF10)".
    How did you solve it?
    Thank you in advance!
    Vana Sounta

  • Error with Function Module for Automatically Reversing FI Documents

    We are trying to use BAPIACREV to automatically reverse a document as part of workflow but get an error with 2 of the import parameters stating they were never transferred:
    1) OBJ_KEY_R
    2) OBJ_SYS
    Does anyone know how to resolve this?

    Hi,
    OBJ_KEY : Reference Key
    This key value must be created while posting the document and this key must be maintained in any of SAP tables
    for example : If the it is Accounting document then all detail found in BKPF and BSEG table, you can find OBJ_KEY in BKPF-AWKEY field.
    OBJ_SYS : Logical system of source document
    Logical system may be maintained in some table.
    for example : If the it is Accounting document then all detail found in BKPF and BSEG table, you can find OBJ_SYS in BKPF-AWSYS field.
    or you can use following FM to get logical system
    CALL FUNCTION 'OWN_LOGICAL_SYSTEM_GET'
    IMPORTING
    OWN_LOGICAL_SYSTEM = L_V_OWN_LOGICAL_SYSTEM
    EXCEPTIONS
    OWN_LOGICAL_SYSTEM_NOT_DEFINED = 1
    OTHERS = 2

  • OBIEE 10g iBots SA System error : No Devices found for User ###

    Hi All,
    I have implemented SA System in my RPD as I wanted to send emails to obi/non-obi users.
    But its giving error - No Devices found for User ....
    I found this error in S_NQ_ERR_MSG table.
    I have an entry in SA_User table, and when I login to OBI using same user, I can see my delivery profile automatically set as expected because of SA System Implementation.
    But its not working when I want to send mail to same user using iBots conditional request.
    Please advise what I am doing wrong here??
    Thanks in Advance !!..
    Well .. now the No devices issue is resolved if i select the checkbox for Interactive Dashboard and Active Delivery Profile in the Destination tab of iBot.
    But still No mail received :(
    Getting below data from S_NQ_ERR_MSG table.
    ERROR_MSG_TEXT
    1:6:Device16:/shared/_ibots/19:6045043489:6045043489:dashboard7:ibotapi6:9719.0:_:
    2:6:Device16:/shared/_ibots/19:6058035879:6058035879:dashboard7:ibotapi6:9719.0:_:
    Please help !!!
    Edited by: 995726 on Apr 11, 2013 7:04 AM

    Solved !!! :)
    Its was a small mistake..
    The SA System columns in Presentation and logical area should be exactly as expected.
    In my case, the correct column should be 'Time Zone' but I had it as 'Timezone'. :)
    Small mistakes are hard to find... neways.. hope this will help some another soul ;)
    Cheersss !!!

  • System object with same credentials for all users?

    Hi everyone
    I would like to create a system object in Portal, which can be used by users in a specific group. However, I want all users to use the same credentials for this system. Is this possible?
    I've tried creating systems, but they all seem to require user mapping to work correctly. Is there some way I can create a system object with the credentials as part of the object, and then just assign permissions to it as required?
    Please let me know if this raises any questions.
    Thanks
    Stuart

    i dont think it is possible to create a system object for all the users with same credentials.anyways you are trying to create system object for some users who belong to a particular group.so you need to do only one time user mapping for that group
    go to user administration-search for the group-go to user mapping tab-give username and password..
    reward points if helpful

  • E71 system error with meeting entry

    Hello everyone, I just bought my E71 and I have the following problem: when I try to add a meeting, after i do "done" it gives me:system error.
    when I try to insert a "to do" or memo, it works fine but when I write a meeting I have this error.
    I tried to add a meeting on outlook and then I syncronized, after this I have a "to do" or task on my phone and not a meeting.
    The sync works fine.
    Thanks a lot for your support.

    pippobaudo:
    Thanks for the info. After many redundant backups and original setting realoadings I managed by trial and error to work out that the error is caused by the backup utility whenever you backup calender or todo notes.
    So I fixed it by making a full backup of my phone, but excluding calender and todo notes. Then I reset to original settings, and loaded the backup. Works fine now.
    Its a bit of a hack that the backup utility cannot restore calender entries correctly...

  • N85: System error with Maps

    Hello
    I have a N85 for a few days now. Everything is working except the Maps: when I try to launch the Maps application I have an error message "System Error" ("Erreur système" in french).
    Does anybody know how to fix this problem ?
    Thanks

    Hello
    Thanks for your answer. In fact when I have a look to the installed apps, Nokia Maps is not in the list of installed applications (which is probably the cause of the error). I have already noticed this and I have tried to install Nokia Maps but the result is the same: Nokia Maps not in the list of installed apps and "System error" when I try to use the maps. The Nokia support has sent me some steps to perform (among them reinitialize the phone to its primary state or even format it) to fix the problem. I will try this.
    I'll let you know if it is has worked
    Thanks
    Regards

  • N97 system error with photos

    When I go to photos on my new N97 it shows the icon of one picture I took earlier in the week (the others have all been transferred off onto my PC). However when I click on the captured area to open it, I get the broken image icon and a General: system error when I try to delete it. The picture isn't visible on the file explorer on the phone or when connected to my PC. How do I remove the image completely?
    If it necessitates a hard reset etc (nokias answer to control-alt-delete it seems but which takes 100 times longer) does this hard reset also wipe the mass storage memory or is it just the phone settings? Is there any way to protect the mass storage memory during a hard reset as having to back up several Gb of data and then restore it just to delete an icon seems completely OTT. Surely there is a database file somewhere that can be deleted/recreated?
    thanks
    Craig

    Hmm, not heard of that before. My N97 refers to captured "items" as opposed to "image or video", your phone seems to think there's a media file somewhere anyway. Try rebooting phone. Also if you rename the Private folder to "Private_old" or something, this will wipe all databases. Reboot, then open Photos and phone will look for pics (and hopefully not find the one you mention). Video and music databases will also rebuild when you access them. I've not had to do this procedure myself, but I've seen it work for others, up to you.
    I can appreciate it's irritating trying to get rid of such a thing without having to format any drives, if problem persists hopefully someone else can offer a simple workaround. Otherwise you'll need to back up and format I reckon. Sorry, all I can think of right now, mate.

  • "Internal System Error" with Envy 114 (110 series)

    I have tried repeatedly to set up web services with this printer, and I continue to get the "internal system error message.  It's maddening!  I have a mac system 10.7.4.  I have the printer set up to work wirelessly, but when I try to deal with web services feature, I fail every time--with this particular message.  
    Has anyone had this problem?

    Are you receiving this error on the front screen of the printer after pressing the web services icon (piece of paper with rings behind it) or are you receiving this through the EWS (embedded web server) of the printer?
    The EWS would be accessed using the printer's IP address and a web browser on a computer.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Error with SAP GUI for Java 6.40 rev6

    Hello,
    we have a problem with the print preview on SAPGUI for Java Version 6.40rev6.
    The problem occurs on Linux  (Ubuntu and Suse) but also on WindowsXP.
    So i guess it's a problem with the Sap Client?
    Instead of the print preview only the message:
    "No pilot configured for 'application/pdf'"
    On the  Ubuntu and WindowsXP systems we testet the SAPGUI for Java 7.10rev5 which works perfectly, but we can't use it on the Suse systems because their libc is too old.
    regards,
    Piotr

    Hello Rolf-Martin,
    i don't have access to this website to view the note.
    The version of the Suse libc is:
    GNU C Library stable release version 2.3.2, by Roland McGrath et al.
    Copyright (C) 2003 Free Software Foundation, Inc.
    This is free software; see the source for copying conditions.
    There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
    PARTICULAR PURPOSE.
    Compiled by GNU CC version 3.3 20030226 (prerelease) (SuSE Linux).
    Compiled on a Linux 2.4.20 system on 2003-03-13.
    Best Regards,
    Piotr Brostovski

  • Got error with newfs command for disk on a Storagetek ST2540.

    Hi,
    It's the first time that use forum and I have pour english language.
    I have Solaris 9 on Sunfire V480 with Qlogic HBA qla2340 connected to SAN ST2540.
    I have 3 LUNs on virtual disk on ST2540 (2 X 2TB and 1 about 730 GB).
    I can create a UFS file system on one of those 3 LUNs.
    A UFS file sytem of 2 TB.
    I got error on ohters like this.
    newfs /dev/rdsk/c6t3d2s0
    newfs: construct a new file system /dev/rdsk/c6t3d2s0: (y/n)? y
    Warning: 2128 sector(s) in last cylinder unallocated
    /dev/rdsk/c6t3d2s0: 4095981488 sectors in 666664 cylinders of 48 tracks, 128 sectors
    1999991.0MB in 4662 cyl groups (143 c/g, 429.00MB/g, 448 i/g)
    super-block backups (for fsck -F ufs -o b=#) at:
    32, 878752, 1757472, 2636192, 3514912, 4393632, 5272352, 6151072, 7029792,
    7908512,
    Initializing cylinder groups:
    ...........................write error on sector 1182585152: I/O error
    Log message in /var/adm/messages
    scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/QLGC,qla@1/sd@3,2 (sd99):
    SCSI transport failed: reason 'aborted': retrying command
    I don't know which trace look for.
    It is somebody has a idea?

    try the -T param for newfs. beware that you need a later edition of solaris 9.. 08/03 or so...
    Edited by: sid_sanders on Sep 12, 2008 2:47 PM

  • Windows operating system error with a Zen Sleek and windows 2

    I have tried to install the creative disk that came with the Zen Sleek. After launch I get this message "windows operating system running on this computer is not supported by this product and can get no further. I am running windows 2000 pro. I have downloaded the creative media source program from the creative.com site and it will install beautifully but when you launch it, I get the error " CTCMS.exe has generated errors and will be closed by windows. You will need to restart program." I figure that these two problems are probably related. We have been able to transfer songs by using the play for sure, but I am disappointed otherwise.
    thanks, Kathy

    On the packaging it should say the player is Win XP only. I'm not sure if the Sleek ships with the Easy CD that allows MTP/PlayForSure based players to work with earlier Windows versions.

Maybe you are looking for