System Errors in fault Message.

Hi All,
Is it required to capture the system errors in an Inbound proxy scenario from class CX_AI_SYSTEM_FAULT. , or the fault message  will automatically get filled while a system error happen?
We are using the method CL_PROXY_FAULT=>RAISE to raise the application errorrs from BAPI return.
Regards,
Sunil

Hi,
   fault message are specific to application errors
    at inbound side and reported back to sender.
  which is different from system error class i.e
   CX_AI_SYSTEM_FAULT.
please check the help content and blog on fault message types.
http://help.sap.com/saphelp_nw04s/helpdata/en/dd/b7623c6369f454e10000000a114084/frameset.htm
Fault Message Types - A Demo (Part 1)
warm regards
mahesh.

Similar Messages

  • SYSTEM-ERROR. Tokens: MESSAGE = Io exception: NL Exception was generated;

    Hello,
    When I am running a page in jdev, I am getting the following error:
    NVFactory: _readNVPair expected )
    NVFactory: _readNVPair expected )
    NVFactory: _readNVPair expected )
    NVFactory: _readNVPair expected )
    oracle.apps.fnd.framework.OAException: Application: FND, Message Name: SYSTEM-ERROR. Tokens: MESSAGE = Io exception: NL Exception was generated; (Could not lookup message because there is no database connection)      at oracle.apps.fnd.framework.OACommonUtils.processAOLJErrorStack(OACommonUtils.java:884).....
    Till yesterday the page was running fine but suddenly I am encountering this exception.
    The DBC file is also fine without any slashes(/).
    The DataBase connection is getting established successfully.
    Please give your suggetions on to solve this issue.
    Thank you.

    Right click on the DB connection you are using and check whether you able to connect and open the "Sql Worksheet"?
    --Shiv                                                                                                                                                                                                                                                       

  • SOAP:Server, System Error SystemError , code MESSAGE.GENERAL /code

    Hi!!!
    I am testing a webservice and I am getting the following error
    <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
       <SOAP:Body>
          <SOAP:Fault>
             <faultcode>SOAP:Server</faultcode>
             <faultstring>System Error</faultstring>
             <detail>
                <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
                   <context/>
                   <code>MESSAGE.GENERAL</code>
                   <text/>
                </s:SystemError>
             </detail>
          </SOAP:Fault>
       </SOAP:Body>
    </SOAP:Envelope>
    Kindly help me with the same.
    Thanking all of you in anticipation
    Regards,
    Kiran

    Hi Michal,
    Thanks for your prompt response. The above stated error is what I got after accessing it from soapUI.
    I tried to access it from the browser and it gave the following message
    - <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
      <SOAP:Header />
    - <SOAP:Body>
    - <SOAP:Fault xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
      <faultcode>SOAP:Client</faultcode>
      <faultstring>Empty HTTP request received</faultstring>
      <faultactor>http://sap.com/xi/XI/Message/30</faultactor>
    - <detail>
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIProtocol</SAP:Category>
      <SAP:Code area="MESSAGE">EMPTY_HTTP_REQUEST_RECEIVED</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Empty HTTP query received; message processing not possible</SAP:Stack>
      </SAP:Error>
      </detail>
      </SOAP:Fault>
      </SOAP:Body>
      </SOAP:Envelope>
    Thanks for your help.
    Regards,
    Kiran

  • ABAP provider proxy error using Fault Message Type

    Hello experts,
    I'm using a provider ABAP proxy with a fault message type in the inbound service interface.
    In the ABAP code on the backend system, I need to fill a database table.
    in case the record exist --> fault + message back to SAP PI to be alerted.
    I do this with a RAISE EXCEPTION TYPE.
    I generated all necessary proxies.
    The error I got on the backend system (SXMB_MONI) is this:
    Application Error - Call Inbound Proxy
    SAP:Category>Application</SAP:Category>
      <SAP:Code area="ABAP">APPLICATION_ERROR</SAP:Code>
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="xxxxx">FMT_xxxxxx</SAP:ApplicationFaultMessage>
      <SAP:Stack>The application triggered an exception</SAP:Stack>
      <SAP:Retry>N</SAP:Retry>
    Can it be that I need to use something else instead of the RAISE EXCEPTION TYPE. to get something back to SAP PI?
    Now the error is logged in SXMB_MONI on the backend system.
    Please advice.
    Thanks a lot
    Dimitri

    Hi Dimitri,
    Check out these links -
    1. /people/shabarish.vijayakumar/blog/2006/11/02/fault-message-types--a-demo-part-1
    2. http://help.sap.com/saphelp_nw04/helpdata/en/5d/a45c3cff8ca92be10000000a114084/frameset.htm
    Regards,
    Sunil Chandra

  • 'System Error' status at Message Monitoring( HTTP to FILE )

    I have created a scenario HTTP to FTP. I sent message to XI server using the HTTP Client.
    After sending the message I am getting the response at browser.
    Result:
    http-Status:  200 Message accepted
    Payload:
    But when I look in to the Message monitoring at RWB, I am getting the message status as
    System error. while going to the details i can see below error category.
    Error Category       MAPPING
    Error Code      EXCEPTION_DURING_EXECUTE
    (Is the password different for port 50000 and 8000)
    Please help me to solve this issue.
    Thanks in Advance,
    John

    This is the trace message that I got for this error
    <Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:46) at com.sap.aii.mappingtool.tf3.Transformer.checkParserException(Transformer.java:41) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:70) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:231) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:63) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:77) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:88) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:63) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:80) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy24.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:95) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)</Trace>
      <Trace level="1" type="T">Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_HTTP2File_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:46)</Trace>
      <Trace level="1" type="T">com.sap.aii.ibrun.server.mapping.MappingRuntimeException: Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_HTTP2File_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:46) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:72) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:77) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:88) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:63) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:80) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy24.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:95) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162) Root Cause: com.sap.aii.utilxi.misc.api.BaseRuntimeException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:46) at com.sap.aii.mappingtool.tf3.Transformer.checkParserException(Transformer.java:41) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:70) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:231) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:63) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:77) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:88) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:63) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:80) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy24.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:95) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)</Trace>

  • Automizing error message with Fault Message Type

    (Request F6)  (Request F6)
    System -
    > XI -
    >        SAP (Doesn't have F6)
              <-- XI <--
          SAP (Doesn't have F6)
       (Respons: error)    (Respons. error)
    (Problem) When the request message doesn't content sufficient information that is required for respons then the XI team will get the message error and the responsibility to solve the problem. In this scenario it is the XI team that sends the error respons to the System.
    (Request (eg. F6) )  (Request (eg. F6))
    System -
    > XI -
    >        SAP (Doesn't have F6)
              <-- XI <--
          SAP (Doesn't have F6)
       (Respons: error)    (Respons. error)
    (Solution) We want to automatize the process so that the error message goes directly to the System via XI. In other words we only want an acknowledgment of the error in XI, we don't want to solve the error since we believe that it is the sender System that is responsible.
    We have seen that there is a Fault Message Type in the Message Interface and we are wondering if that is the way to do it? And it that case, how?

    Hi,
    Fault message is a error meesage. Its like an exception in simple terms. The fault message is used to
    store a log for application error. Fault messages is defined in IR.
    To give a overview on Fault messages it is mostly used in synchronous communication. When an error
    occurs at the inbound side instead of sending the response message back it sends a fault message back
    to the sender system to handle error.
    Fault Message are Msg type that provided whenever u create a namespace..they are usually used to get
    the exception or error mapped which has occured while execution of Application at the sender/receiver
    end....
    One scenario where i had used it from Soap to RFC where i defined the exception in rfc source code at
    r/3 end...I mapped that exception to Fault msg type that i created of my own type(didnt used the
    default)..
    Fault messages are used to propogate / send back the error message to the calling application. This is
    used when there is a failure and the sending system needs to know what the error was. This is more of
    catching Application Errors
    check this nice blog also
    /people/shabarish.vijayakumar/blog/2006/11/02/fault-message-types--a-demo-part-1
    http://help.sap.com/saphelp_nw2004s/helpdata/en/5d/a45c3cff8ca92be10000000a114084/content.htm
    Asynchronus RFC  exception handling
    XI Alerts are not getting triggered from proxy servers
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ee5bc490-0201-0010-e9b5-
    a258cf083bca
    /people/sap.user72/blog/2006/01/16/xi-propagation-of-meaningful-error-information-to-soap-client
    Fault Message
    Regards
    Seshagiri
    Edited by: N V Seshagiri on Feb 29, 2008 12:19 PM

  • Fault message handling in syn proxy

    Hi Experts,
    I have implemented Proxy to Web service synchronization scenario and implemented request response and fault message mapping.
    But when the scenario is getting the Application error the fault message is visible in sxmb_moni but not visible in the proxy or not being forward to proxy ?
    Can you help if there is any more config or  any other follow up is required, all the mapping and other part of fault message is as per PI standard only including the proxy ABAP code?
    regards,.

    Hi,
    But when the scenario is getting the Application error the fault message is visible in sxmb_moni but not visible in the proxy or not being forward to proxy ? - In your R/3 system by transaction SXMB_ADM, then integration engine configuration - specific configuration - in RUNTIME add parameter for logging and tracing and set it to maximum level...........also LOGGING_SYNC parameter should be enabled................
    then re-run your scenario..........then for a application fault msg in SXMB_MONI of XI, you should see a fault msg in SXMB_MONI of your r/3 system.
    Regards,
    Rajeev Gupta

  • Convert application error to system error

    Iam facing an issue in BPM, Iam triyng to access to a webservice using synchronous send step, and I ahve an exception branch to catch the syetm error and fault message. Eventhough I specified fault messages, application error was not properly recognized. For this Iam trying to write an adapter module.
    In that adapter module I want to access the error in runtime environment, massage the application error look like system error.
    Iam lookign for info like, how do I access the error in runtime environment and covert it to look like system error so that BPM could see that as a system error.

    Hi Vamsi,
    As per my understandiong Application errors different with System errors. so i dont think we can convert application error to system error.
    you need to find other way to handle applications error.
    Regards,
    Raj

  • About Fault messages?

    Hi experts,
    i have a senario where i have to create fault message,What is the use off fault message........To create the fault message sholud i create complete source structrue in data type of fault messsage.....can any one please send doc's and information on Fault message.
    thanks & regards,
    Phnani

    Hi Phani,
    Fault message is a error meesage. Its like an exception in simple terms. The fault message is used to store a log for application error. Fault messages is defined in IR.
    To give a overview on Fault messages it is mostly used in synchronous communication. When an error occurs at the inbound side instead of sending the response message back it sends a fault message back to the sender system to handle error.
    Fault Message are Msg type that provided whenever u create a namespace..they are usually used to get the exception or error mapped which has occured while execution of Application at the sender/receiver end....
    One scenario where i had used it from Soap to RFC where i defined the exception in rfc source code at r/3 end...I mapped that exception to Fault msg type that i created of my own type(didnt used the default)..
    Fault messages are used to propogate / send back the error message to the calling application. This is used when there is a failure and the sending system needs to know what the error was. This is more of catching Application Errors.
    Also please go through the link below to get the details for fault messages...
    http://help.sap.com/saphelp_nw04/helpdata/en/5d/a45c3cff8ca92be10000000a114084/content.htm
    check this nice blog also
    /people/shabarish.vijayakumar/blog/2006/11/02/fault-message-types--a-demo-part-1
    http://help.sap.com/saphelp_nw2004s/helpdata/en/5d/a45c3cff8ca92be10000000a114084/content.htm
    Asynchronus RFC  exception handling
    XI Alerts are not getting triggered from proxy servers
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ee5bc490-0201-0010-e9b5-a258cf083bca
    /people/sap.user72/blog/2006/01/16/xi-propagation-of-meaningful-error-information-to-soap-client
    Fault Message
    Cheers...
    Vasu
    <b>** REward POints if found useful **</b>

  • BPM synchronous send step - Fault message extraction

    Hello Experts,
    I am developing a BPM with Asynch RFC -> synch Webservice -> Asynch RFC scenario.
    I have defined fault message in the synchronous interface used in the send step for web service, and also defined
    exception branch where an alert is thrown.
    In the alert, i want to send the fault text from the fault message. How can i do that??
    Thanks

    Hi Mona,
    SOAP adapter doesnt support fault messages.
    check stephan's reply @ How catch the SOAP Fault Message ?
    > SOAP adapter does not support fault message.
    > Any fault is treated as error.
    > fault messages are only supported for XI messages (ABAP or Java proxies) and RFCs.
    Fault message handling is not possible inside BPM.

  • Keep getting iTunes.exe system error: program can't start because iAdCore.dll is missing

    When I try to open iTunes on my desktop computer (Windows 7), I keep getting an iTunes.exe - System Error.  The message states iTunes was not installed correctly - Error 7 (Windows error 126).  Each time I uninstall and reinstall iTunes, it works again.  But then the next time I use my computer I get the error message all over again and have to uninstall/reinstall to get iTunes running again. Does anybody know why this would keep happening?

    See iTunes launch errors caused by iAdCore.dll.
    Review the rest of the user tip if required.
    tt2

  • SYSTEM ERROR WHILE OPENING CHECK IN

    I format my C7 recently, After that while opening check in it shows SYSTEM ERROR, The same message shows while opening signal boost . . .
    Whats a remedy . . ?

    @MUHAMMEDYASIN
    Is your C7-00 running Ovi Maps v3.06 or 3.08 with Weather?
    Happy to have helped forum with a Support Ratio = 42.5

  • SOAP to RFC using fault message

    Hi All,
    I get a request from Web-service by using the SOAP adapter and pass the same to the SAP ECC for geting the response. I do not need a message mapping as i am passing the same data to SAP ECC. I need to track the errors in fault messages.
    Q1. Can i use the fault message handling without using the message mapping.
    Q2. If web-service is down and i can't send the response back then do i need to using the fault messageing concept or is there any other way i can get the details back in XI.
    If we can use the fault message without using message mapping concept, can someone help me out.
    Thanks,
    JGD

    You are using SOAP sender and Proxy receiver synchronous
    >>Q1. Can i use the fault message handling without using the message mapping.
    Request mapping, Response mapping and fault message mapping - all these three constitutes message mapping.
    >>Q2. If web-service is down and i can't send the response back then do i need to using the fault messageing concept or is there any other way i can get the details back in XI.
    If the webservice is down , you dont get message, then you dont need fault message.  Fault message is used only for business exceptions and more. If your ECC is down due to some exceptions or errors, you can trace those messages in  proxy coding and pass  it up to soap as fault message as response.
    In this case, you dont need at all.

  • SOAP adapter engine with system error, problem with fault message.

    HI,
    I have IDOC -> PI -> SOAP scenario.
    Idoc to PI is async. I have no problem in receiving the idoc in PI. The message mapping is carried out and sent to the adapter engine. I can also see the technical routing payload. It is sucessful at XML monitoring in SXMB_MONI.
    The error is at PI -> SOAP.
    I have wsdl provided by the receiver webservice. Which I have imported.
    And created a service interface against this wsdl. I tried changing it to both sync and async.
    I have also provided fault message.
    I have set a receiver soap communication channel and provided the target URL like "http://xxx/services" and soap
    action = processDocument. Also provided user id and password.
    I have a
    Sender Agreement
    Receiver determination
    Interface determination
    Receiver Agreement
    I check in RWB adapter engine, this message goes to system error. The error log is as shown at the bottom.
    When I see the message content, the SOap document shows me the details about IDOC, Instead I feel it should match
    with the wsdl, where they have specified the corresponding interface name and address location etc.Please correct me.
    How does the receiver know which service interface is it? The Service Interface which I created in the ER is
    different from the WSDL, Does this have to be same? I see that the soap document in the adapter engine has the
    Service interface name which I created in the  ER. Where in the document the Reciever interface name is sent?
    Where can I see the generated soap document for the receiver?
    Is there some setting/configuration required in PI for this to work?
    I tried using the tcpgw to see the error. If I dont provide the service interface name in the communication channel
    then I get the following error in the TCPGW. "The service cannot be found for the endpoint reference"
    When I provide the service interface name in the communication channel I get a valid fault message.
    Similarly
    When I use SOAPUI, I can see the fault exception being return. The adapter engine doesnot show an equivalent message
    instead it goes into system error as shown at the bottom. I guess this is expected, if so what is the work around? (I found this weblog /people/alessandro.guarneri/blog/2011/01/10/soap-fault-in-sap-pi-hijack-it, do I need to implement this? Or use ALEAUD?
    The fault message what I see in SOAPUI has the below format.
    <soapenv:Fault xmlns:axis2ns1="http://schemas.xmlsoap.org/soap/envelope/">
             <faultcode>axis2ns1:Server</faultcode>
             <faultstring>nested exception is: psdi.util.MXApplicationException: BMXAA7136E - Validation failed when the
                                database default values were set. See the associated message for more information.
               BMXAA4190E - Country NZ is not in the value list.</faultstring>
             <detail>
                <Exception>org.apache.axis2.AxisFault: nested exception is: psdi.util.MXApplicationException: BMXAA7136E
                          - Validation failed when the database default values were set. See the associated message for more information.
         BMXAA4190E - Country NZ is not in the value list.
                /Exception>
             </detail>
      </soapenv:Fault>
    And the fault message in my ER service interface is stanadard datatype ExchangeFaultData, which is different from
    the above. Is this the problem? Can I change the data type here to be the same as above?
    Audit log in the RWB adapter engine.
    Time Stamp Type Description
    30.09.2011 15:10:57 Information MP: processing local module Localejbs/sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean
    30.09.2011 15:10:57 Information SOAP: request message entering the adapter with user J2EE_GUEST
    30.09.2011 15:10:57 Information SOAP: completed the processing
    30.09.2011 15:10:57 Information SOAP: sending a delivery error ack ...
    30.09.2011 15:10:57 Information SOAP: sent a delivery error ack
    30.09.2011 15:10:57 Error MP: exception caught with cause
    com.sap.engine.interfaces.messaging.api.exception.MessagingException
    30.09.2011 15:10:57 Error Adapter Framework caught exception: null
    30.09.2011 15:10:57 Error Delivering the message to the application using connection
    SOAP_http://sap.com/xi/XI/System failed, due to:
    com.sap.engine.interfaces.messaging.api.exception.MessagingException.
    30.09.2011 15:10:57 Information The message status was set to WAIT.
    30.09.2011 15:10:57 Information The asynchronous message was successfully scheduled to be delivered at Fri Sep 30
    15:15:57 NZDT 2011.

    I tried changing it to both sync and async.
    I have also provided fault message.
    dont feel that you need to do above steps.
    I have a
    Sender Agreement
    ideally you dont need a sender agreement (and a channel) for IDOC --> PI flow.
    When I see the message content, the SOap document shows me the details about IDOC
    this is fine...you may see fields as seen in EDI_DC40 of the IDOC...
    How does the receiver know which service interface is it?
    receiver need not know about the SI created in PI.
    The Service Interface which I created in the ER is
    different from the WSDL, Does this have to be same?
    you should the WSDL (external definition) as the Request Message in your service interface.
    Is there some setting/configuration required in PI for this to work?
    nothing specific...AFAIK
    I have set a receiver soap communication channel and provided the target URL like "http://xxx/services" and soap action
    can you open the URL from Internet explorer...from your machine or from the machine which is in the same network as your PI server?
    Things to check:
    WSDL structure in PI and in target system is exactly the same.
    does the target system require mesage in SOAP format (SOAP envelope - SOAP Header + SOAP body)?
    target system is up and running?

  • System Error in Message Monitoring while it shows checked flag in SXMB_MONI

    Hia,
    We are working on ABAP Proxy --> SAP PI 7.1 --> SOAP (Asynchronous Scenario).
    (ECC -> PI -> Legacy CRM)
    I have following queries:
    1. While sending messge across to Legacy system, we can see CHECKED flag in SXMB_MONI but there is System Error in Message Monitoring. When checked legacy system is unable to receive any message. Cannot understand the issue.
    2. Is there any way to check in PI system whether the message has reached Legacy System other than making scneario synchronous?
    Regards

    System is getting connected and able to send asynchronous messages to legacy system. But getting following error while sending synchronous error:
    2010-05-10 13:15:05     Information     Delivering to channel: CC_SOAP_SOReject_Out
    2010-05-10 13:15:05     Information     SOAP: request message entering the adapter with user J2EE_GUEST
    2010-05-10 13:15:05     Information     SOAP: completed the processing
    2010-05-10 13:15:05     Information     SOAP: continuing to response message f33caa90-5c07-11df-c659-96d147c2ff0f
    2010-05-10 13:15:05     Error     SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.
    2010-05-10 13:15:05     Error     Adapter Framework caught exception: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.
    2010-05-10 13:15:05     Error     Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.. Setting message to status failed.
    2010-05-10 13:15:06     Error     The message status was set to FAIL.
    I have already checked Data Structure and it is fine.
    Regards
    In this scenarios we are using XSLT mapping using CDATA.
    Please suggest solution.

Maybe you are looking for

  • Downloads in wrong account

    Hey guys, so i mistakenly bought a tv series on the wrong icloud account on my iphone which downloaded to my mac. Then i signed into the correct account in itunes on my mac and the tv series began downloading again. However, when i try to view it on

  • Custom Ribbon tab does not show in generic list

    Hi. I'm deploying the following definiton on a generic list, but the new custom tab does not show up. Anyone that can see what I have done wrong? Thanks! <Elements xmlns=”http://schemas.microsoft.com/sharepoint/“> <CustomAction Id=”Ribbon.MyTab” Titl

  • Vsftpd and large downloads - cache problem

    Today I have raised vsftpd to transfer a lot of files (~30 GB) to my friend's machine. At start all was ok - full download speed was 2 MB/s, and iotop showed these MB's read from FS. When about 4 GB where downloaded  from me, strange things happened.

  • Transports successful, but changes made in Dev. are not visible in the QA.

    Hi, I have made a couple of transports from Dev. to QA relating to few queries. Query elements include newly added variables and formula chages. All the transports were successfully and none of them produced niether an error nor a warning message. Bu

  • How to create new view in WebUI for Product

    Hello, We want to create a new view (Z) based on the fields of the BOL object and show it in the WebUI. Is there any step by step explanation how to do it? Thanks in advance, Sergey Kozyrev