System Extensive Test Failed

I've been experiencing some blue screens of death.After running recovery from the hard drive partitiion, I still experience blue screens and often can't boot. Here are my logs from the HP PC Diagnostics UEFI.Where do I go from here? 

The notebook passes the system extensive test with either of the two 8 gb memory modules placed in the slot closest to the motherboard.  It appears that the RAM itself is okay. I am going to try each module in the other slot.  Although it fails a test, I've never had an issue with the optical drive. I may not need to replace it. The notebook has the model number m7-j178ca.  I do appreciate your help, Huffer. We can wait on looking for parts until I check the other slot. 

Similar Messages

  • Define R/3 system in EP: System Connection Test failes

    Hi all
    I want to configure a R/3 system (fixed application server) in SAP EP Netweaver 04. I am pretty sure that the connection details and the user mapping is ok. When I test the connection I get
    Test Connection with Connector
      Test Details:
    The test consists of the following steps:
    1. Retrieve the default alias of the system
    2. Check the connection to the backend application using the connector defined in this system object
      Results
    Retrieval of default alias successful
    Connection failed. Make sure that Single Sign-On is configured correctly
    I now used the tool described in OSS Note 785029:
    - When I test connection for the JCO Client Service using the system alias the test is successful
    - When I test connection for the Connector Gateway Service for the same system alias I get an exception:
    com/sap/portal/connectivity/ConnectivityRuntimeException
    Any idea? What can go wrong between the Connector Gateway Service and the JCO?
    Bye
    Michael

    Hi Jan
    Thanks for your help.  I could only find trace files under
    /usr/sap/<SID/><instance>/j2ee/cluster/server0. They seem to contain only the successful calls from testing the JCO Client Service.
    I guess the UIDPW and JCO must be working because the JCO Client Service returns success. Only the Connector Gateway Service returns an exception.
    I looked at various traces and log files, also used the RFC trace on the backend instance (SAP R/3 4.7). It looks like the Connector Gateway Service returns and exception before as actual call is done. Where would I find more information about the exception thrown in the  Connector Gateway Service ?
    Thanks
    Michael

  • VI Analyzer Front Panel Size and Postion Test fails

    Hi
    We make a lot of use of the VI Analyser and I have been playing with the configuration settings to try and make it only fail the tests that matter to us and I have one test I do not understand correctly.
    From the LabVIEW help
    Panel Size and Position—Checks that a front panel
    completely resides within the bounds of the screen. The test also checks whether
    the front panel is larger than the maximum specified width and height. If you
    are using a multi-monitor system, the test fails if the panel does not reside
    entirely within the bounds of the primary monitor. This test works only on
    standard, control, and global VIs.
    I would like to apply this test, a simple check developers are not creating huge VI, it sounds simple enough, but I cannot seem to get this test to pass.
    I am working with two monitors and this test fails when my VI is on either monitor with the message  "This VI's front panel does not reside entirely within the specified bounds (1280 x 1024)" my current screen resolutionis 1280 x 1024, so I assume as long as my VI front panel fits within one screen it should be a pass.
    I can clearly see my that VI front panel (and block diagram for that matter) fits within the screen of either monitor. If I look at the VI properties of my VI the Window Size is 474 x 513, could anybody please suggest when why this might be failing.
    cheers 
    Dannyt
    Danny Thomson CLAD
    Sub10 Systems Ltd
    Solved!
    Go to Solution.

    Hi Norbert,
    Thanks for the prompt reply, my asking the question and your reply has made me play with this a little deeper and I have managed to solve my problem.
    In case anyone else has a similar problem here are the details.
    When you have two monitors and look at the Windows properites you see one monitor is identified as 1 and the other as 2, thses identities are based on the graphics card and the which monitor is plugged into which ouptput connector. You can then chose which monitor you wish to act as your primary monitor. You would suspect it would not matter once you have selected your primary monitor BUT IT DOES.
    My inital set-up   
    Left Hand Monitor    - idenity 2 selected to be primary monitor
    Right Hand Monitor - identiy 1 
    With this set-up everything looks and acts as I expect it to task bar, icons etc on my primarry monitor.  However if you run the VI Analyser it will fail Panel Size and Position on BOTH the left and right hand monitors.
    I crawlled under my desk and swapped the monitors cables round so now the set-up is
    Left Hand Monitor    - idenity 1 selected to be primary monitor
    Right Hand Monitor - identiy 2
    Now the VI Analysers Panel Size & Position Tests will pass on the left hand monitor but fail on the right hand monitor, just as would expect.
    It appears that LabVIEW is looking not only at the windows "Primary Monitor" setting but also the identies, this does not seem the behaviour I would expect nor the correct behaviour.
    cheers 
    Dannyt
    Danny Thomson CLAD
    Sub10 Systems Ltd

  • HP Pavilion DV7; System will not boot; Memory Test Failed using Advanced System Diagnostic​s

    Not sure exactly how, but I managed to contracted several variants of the nasty Rovnix virus and now my system will not even boot into Safe Mode after trying to restore to several different restore points.  Enabled bootlogging, but not sure how to retrieve the log.
    Currently am able to get into HP Advanced Diagnostics and began Start-Up Test.  Test failed on Memory Module:
    Failure ID: Q0AE6C-5LS79T-MFH15G-406N03
    Any next steps or directional assistance would be greatly appreciated.  Thank you in advance!

    Hello @GarrettBishop,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how your notebook computer has failed a memory test in the advanced system, and I would be happy to assist you in this matter!
    Since the Failure ID has come up with Q0AE6C-5LS79T-MFH15G-406N03, I recommend contacting our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assis​t.html
    I hope this helps!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • WebDynpro for Abap Test failed (System Admin/Support/WD)

    Hello,
    I'm using EP 7.0 and I'm trying to test travel&expenses (Ehp3) WD for Abap from System Admin/Support Desk: Integration of SAP Applications/WebDynpro and we get the following error: Exception in SAP Application Integrator occured: Unable to parse template...the problem occured at position 275. Cannot process expression &lt;IView.PCDUnit.ShortID&gt; because Unable to get PCD Unit com.sap.portal.appintegrator.sap.WebDynpro.
    System contector test is ok. Please, could you help me?
    Thank you

    Hello Michael,
    Ok, I forget system connector and support tests. Web AS parameter are supposed to be ok:
    Web AS Host Name: host.domain:port (from smicm tx)
    Web AS Host Name: /sap/bc/webdynpro/sap/
    Web AS Protocol:     http
    but the SAP Web AS Connection test fails. When trying to execute the iView it works. Does it mean that is it correct? Why WAS connection test fails?
    In the other hand, when iView is displayed, it asks for user and password because the R/3 user is locked. Why R/3 user is locking everytime?
    Thank you&Regards

  • System Landscape connection test fail

    Dear EP expert,
    I try to do a System Connection Tests for my system landscape and some part of the test failed.. Anyone have idea what is wrong with the configuration. Below are the test result and mainly are the HTTP/S connection and user mapping failed.
    Test Details:
    The test consists of the following steps:
    1. Check the validity of the system ID in the system object
    2. Check whether the system can be retrieved
    3. Check whether a SAP system is defined in the system object
    4. Validate the following parameters: WAS protocol; WAS host name
    5. Check HTTP/S connectivity to the defined backend application
      Results
    1. The system ID is valid
    2. Retrieval of the system was successful
    3. The system object represents an SAP system
    4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (devportal01:50000)
    5. HTTP/S connection failed
    ITS Connection
      Test Details:
    The test consists of the following steps:
    1. Check the validity of the system ID in the system object
    2. Check whether the system can be retrieved
    3. Check whether the system object has a valid system alias
    4. Check whether a SAP system is defined in the system object
    5. Validate the following parameters: ITS protocol; ITS host name
    6. Check the validity of any user mapping in the system object
    7. Check HTTP/S connectivity to the defined backend application
      Results
    1. The system ID is valid
    2. Retrieval of the system was successful
    3. Retrieval of the default alias was successful
    4. The system object represents an SAP system
    5. The following parameters are valid: ITS Protocol (http) ITS Host Name (absmrq01:8001)
    6. User mapping is not valid
    7. HTTP/S connection failed
    Test Connection with Connector
      Test Details:
    The test consists of the following steps:
    1. Retrieve the default alias of the system
    2. Check the connection to the backend application using the connector defined in this system object
      Results
    Retrieval of default alias successful
    Connection failed. Make sure user mapping is set correctly and all connection properties are correct.
    Thanks,
    Regards
    Bryan

    Hello gurus,
    I am facing the same problem, could  you please help me, the problem is http error detailed below
    SAP Web AS Connection
      Test Details:
    The test consists of the following steps:
    1. Check the validity of the system ID in the system object
    2. Check whether the system can be retrieved
    3. Check whether a SAP system is defined in the system object
    4. Validate the following parameters: WAS protocol; WAS host name
    5. Check HTTP/S connectivity to the defined backend application
      Results
    1. The system ID is valid
    2. Retrieval of the system was successful
    3. The system object represents an SAP system
    4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name
    5. HTTP/S connection failed
    ITS Connection
      Test Details:
    The test consists of the following steps:
    1. Check the validity of the system ID in the system object
    2. Check whether the system can be retrieved
    3. Check whether the system object has a valid system alias
    4. Check whether a SAP system is defined in the system object
    5. Validate the following parameters: ITS protocol; ITS host name
    6. Check the validity of any user mapping in the system object
    7. Check HTTP/S connectivity to the defined backend application
      Results
    1. The system ID is valid
    2. Retrieval of the system was successful
    3. Retrieval of the default alias was successful
    4. The system object represents an SAP system
    5. The following parameters are valid: ITS Protocol (http) ITS Host Name
    6. User mapping is valid
    7. HTTP/S connection failed
    Test Connection with Connector
      Test Details:
    The test consists of the following steps:
    1. Retrieve the default alias of the system
    2. Check the connection to the backend application using the connector defined in this system object
      Results
    Retrieval of default alias successful
    Connection successful
    Thanks
    Edited by: Akbar Gudur on Jan 15, 2009 6:24 PM
    Edited by: Akbar Gudur on Jan 15, 2009 6:24 PM

  • WebDynpro Abap test failed (System admin/suport)

    Hello,
    I'm using EP 7.0 and I'm trying to test travel&expenses (Ehp3) WD for Abap from System Admin/Support Desk: Integration of SAP Applications/WebDynpro and we get the following error: Exception in SAP Application Integrator occured: Unable to parse template...the problem occured at position 275. Cannot process expression &lt;IView.PCDUnit.ShortID&gt; because Unable to get PCD Unit com.sap.portal.appintegrator.sap.WebDynpro.
    System contector test is ok. Please, could you help me?
    Thank you

    Hello,
    Ok, I forget system connector and support tests. Web AS parameter are supposed to be ok:
    Web AS Host Name: host.domain:port (from smicm tx)
    Web AS Host Name: /sap/bc/webdynpro/sap/
    Web AS Protocol: http
    but the SAP Web AS Connection test fails. When trying to execute the iView it works. Does it mean that is it correct? Why WAS connection test fails?
    In the other hand, when iView is displayed, it asks for user and password because the R/3 user is locked. Why R/3 user is locking everytime?
    Thank you&Regards

  • Workflow configuration error - System Account connection test failed

    Hi,
    Has anybody faced a problem with Workflow configuration? The version we are using is 2.6.2 on Oracle database 9.2.0.5 on AIX5L. The workflow installation from 9.2.0.1 installation CDs goes through without any problem. But when the workflow configuration tool comes up it fails with the following error.
    "SYSTEM account connection test failed".
    The system and sys accounts are fine as verified by sqlplus. Any help is greatly appreciated.
    The log file is shown below.
    Workflow Configuration Assistant-AIX
    WorkflowCA:
    WorkflowCA: Workflow Configuration in progress...
    WorkflowCA:
    WorkflowCA: Screen width -2304-, screen height -1024-
    WorkflowCA: Graphics User Interface mode
    WorkflowCA:
    WorkflowCA: Language - US
    WorkflowCA:
    WorkflowCA: Start testing connection, which takes less than 3 minutes.
    WorkflowCA:
    WorkflowCA: Account connection test for SYSTEM
    WorkflowCA: SQL Thread: Thread[TstSQL,5,main]
    WorkflowCA: chkSQL: true
    WorkflowCA: cmdLine: /app/oracle/product/9.2.0/bin/sqlplus system/<Masked Password> @/app/oracle/product/9.2.0/wf/sql/wftstcon.sql
    WorkflowCA: envVar[0]: -ORACLE_SID=rsdb-
    WorkflowCA: envVar[1]: -ORACLE_HOME=/app/oracle/product/9.2.0-
    WorkflowCA: envVar[2]: -WF_RESOURCES=/app/oracle/product/9.2.0/wf/res/wfus.res-
    WorkflowCA: envVar[3]: -TZ=EST5EDT-
    WorkflowCA: envVar[4]: -WF_NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1-
    WorkflowCA: envVar[5]: -PATH=/app/oracle/product/9.2.0/bin:/app/oracle/product/9.2.0/lib:$PATH-
    WorkflowCA: envVar[6]: -LD_LIBRARY_PATH=/app/oracle/product/9.2.0/lib-
    WorkflowCA: envVar[7]: -WF_TNS_ADMIN=/app/oracle/product/9.2.0/network/admin-
    WorkflowCA: envVar[8]: -WF_SHLIB_PATH=/app/oracle/product/9.2.0/lib-
    WorkflowCA: Exit Val : 126
    WorkflowCA: chkSQL is alive after 1 seconds: false
    WorkflowCA: SYSTEM account connection test failed.
    WorkflowCA: Terminating...
    Thanks,
    Chethan

    We had this problem on 2 machines.
    On the 1st machine, we tried the local install option after a few days (Local option with no connect string) and it worked with no problems!
    On the 2nd machine, we could never get it to work even after opening a tar with Oracle. Finally we did a remote install from the 1st machine into the database on the 2nd machine. During the remote install while running wfinstall on the 1st machine, we just had to choose the remote option and the database service name for the connect string.
    Thanks,
    Chethan

  • The Group Policy client-side extension Scripts failed ...

    This is an error I've been seeing forever and it was always the impression that upgrading would resolve it, but it never has even in 10.3. 100% of our users get these errors in the Event Viewer:
    Event Type: Error
    Event Source: Userenv
    Event Category: None
    Event ID: 1085
    Date: 10/21/2010
    Time: 8:04:52 AM
    User: NT AUTHORITY\SYSTEM
    Computer: XXXXXX
    Description:
    The Group Policy client-side extension Scripts failed to execute. Please look for any errors reported earlier by that extension.
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    We also seem to have flakey policy issues where once in awhile a user will not be able to logon to Windows with Workstation Only while getting the " not allowed to logon interactively" message, other times the users report not being able to access the Windows Date and Time Properties and further sometimes they are unable to make system changes.
    We have troubleshooted this and the only resolutions we've found are to run zac cc, zac ref, zac pl and sometimes it seems like deleting c:\windows\system32\grouppolicy will help.
    In regards to the Event Viewer entry I posted, on any given machine I can issue the command gpupdate and it will put another entry into the Event Viewer (sometimes multiple ones). I've learned through research that if I "clean up" c:\windows\system32\grouppolicy\gpt.ini the errors go away, but once the policy is refreshed they come right back.
    This is the version ZenWorks gives the users:
    [General]
    gPCFunctionalityVersion=2
    gPCFunctionalityVersion=2
    gPCMachineExtensionNames=[{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{0F6B957D-509E-11D1-A7CC-0000F87571E3}][{3610EDA5-77EF-11D2-8DC5-00C04FA31A66}{0F6B957D-509E-11D1-A7CC-0000F87571E3}][{42B5FAAE-6536-11D2-AE5A-0000F87571E3}{40B6664F-4972-11D1-A7CA-0000F87571E3}][{4CFB60C1-FAA6-47F1-89AA-0B18730C9FD3}{0F6B957D-509E-11D1-A7CC-0000F87571E3}][{827D319E-6EAC-11D2-A4EA-00C04F79F83A}{803E14A0-B4FB-11D0-A0D0-00A0C90F574B}]
    Version=6488106
    gPCUserExtensionNames=[{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{42B5FAAE-6536-11D2-AE5A-0000F87571E3}{40B66650-4972-11D1-A7CA-0000F87571E3}][{4CFB60C1-FAA6-47F1-89AA-0B18730C9FD3}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{A2E30F80-D7DE-11D2-BBDE-00C04F86AE3B}{FC715823-C5FB-11D1-9EEF-00A0C90347FF}]
    This is the version I cleaned up:
    [General]
    gPCFunctionalityVersion=2
    gPCUserExtensionNames=[{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{4CFB60C1-FAA6-47F1-89AA-0B18730C9FD3}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{A2E30F80-D7DE-11D2-BBDE-00C04F86AE3B}{FC715823-C5FB-11D1-9EEF-00A0C90347FF}]
    gPCUserExtensionNames=[{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{A2E30F80-D7DE-11D2-BBDE-00C04F86AE3B}{FC715823-C5FB-11D1-9EEF-00A0C90347FF}]
    I'm not sure how to get Zenworks to use the cleaned up version nor and I too sure what those extra extensions are and how they got in there. I may need to contact Novell in regards to this, but since I'm already working on an SR with them I figured I'd go ahead and post here first.
    Any help or advice would be greatly appreciated.

    Here are the groups I'm using. NOTE: These have been in affect throughout the issues experienced. Users will work perfectly fine then suddenly the problem will start happening without any policy change on our side.
    -Member of-
    Network Configuration Operators+
    Remote Desktop Users+
    Users+
    -Assigned Rights under a group I called "Other Rights"-
    Access this computer from network
    Change the system time
    Log on locally
    Shut down the system
    The only condition I have is that these issues happen when logging in Workstation Only and I'm not able to recreate the problem on demand with tests.
    Originally Posted by craig_wilson
    The "Interactive Logon" is a Windows Security Permission.
    It is generally assigned to certain local groups such as "User".
    Which groups are assigned this right can be changed manually and
    controlled by local security policies.
    When user's get this error, it generally means their account is not in a
    local group that has been assigned that right.
    If using "DLU", make sure the user accounts are a member of "Users".
    And If anyone was messing with security policies, make sure they did not
    take away "Interactive Logons" from anyone.
    On 10/29/2010 7:06 AM, jcsmith1 wrote:
    >
    > Thanks for replying craig.
    >
    > My policy woes have only grown since my first post. We are currently
    > testing the removal of administrative rights and now we're having
    > teleworkers (who login Workstation Only) getting the message "policy
    > does not allow interactive login". What -seems- to fix it is a zac cc,
    > zac ref and zac pl, however we just started getting call backs from
    > users.
    >
    > I seem to have no further leads and Novell's ZenWorks tech supports
    > seems to be going through some kind of painful-to-the-customer
    > transition as one of my thoughts on resolving the issue is to go to 10.3
    > or 10.3.1, but my Satellites appear to be upgrading but in reality do
    > not upgrade (but the primary servers upgraded) (See SR 10655976331).
    >
    > Does anyone knows how to troubleshoot policy issues when the users
    > aren't loggin into ZCM?
    >
    > craig_wilson;2036646 Wrote:
    >> See: 'Group Policy Error: The Group Policy client-side extension Script
    >> failed to execute.'
    >> (Group Policy Error: The Group Policy client-side extension Script failed to execute.)
    >>
    >> This would never be fixed in any patch, since it would be the job of
    >> GPEDIT to properly maintain the GPT.INI.
    >>
    >> Most of the Time these errors are cosmetic and caused by stray script
    >> extensions.
    >>
    >> You may want to create an Enhancement Request to allow the creation of
    >> "Filters" so certain errors are discarded and not sent to the DB/ZCC.
    >> This way an Admin could choose to filter out various error messages
    >> that
    >> they deem are not actually of concern.
    >>
    >> On 10/21/2010 9:36 AM, jcsmith1 wrote:
    >>>
    >>> This is an error I've been seeing forever and it was always the
    >>> impression that upgrading would resolve it, but it never has even in
    >>> 10.3. 100% of our users get these errors in the Event Viewer:
    >>>
    >>> -Event Type: Error
    >>> Event Source: Userenv
    >>> Event Category: None
    >>> Event ID: 1085
    >>> Date: 10/21/2010
    >>> Time: 8:04:52 AM
    >>> User: NT AUTHORITY\SYSTEM
    >>> Computer: XXXXXX
    >>> Description:
    >>> The Group Policy client-side extension Scripts failed to execute.
    >>> Please look for any errors reported earlier by that extension.
    >>>
    >>> For more information, see Help and Support Center at
    >>> http://go.microsoft.com/fwlink/events.asp.
    >>> -
    >>> We also seem to have flakey policy issues where once in awhile a
    >> user
    >>> will not be able to logon to Windows with Workstation Only while
    >> getting
    >>> the " not allowed to logon interactively" message, other times the
    >> users
    >>> report not being able to access the Windows Date and Time Properties
    >> and
    >>> further sometimes they are unable to make system changes.
    >>>
    >>> We have troubleshooted this and the only resolutions we've found are
    >> to
    >>> run zac cc, zac ref, zac pl and sometimes it seems like deleting
    >>> c:\windows\system32\grouppolicy will help.
    >>>
    >>> In regards to the Event Viewer entry I posted, on any given machine
    >> I
    >>> can issue the command gpupdate and it will put another entry into
    >> the
    >>> Event Viewer (sometimes multiple ones). I've learned through
    >> research
    >>> that if I "clean up" c:\windows\system32\grouppolicy\gpt.ini the
    >> errors
    >>> go away, but once the policy is refreshed they come right back.
    >>>
    >>> This is the version ZenWorks gives the users:
    >>>> [General]
    >>>> gPCFunctionalityVersion=2
    >>>> gPCFunctionalityVersion=2
    >>>>
    >> gPCMachineExtensionNames=[{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{0F6B957D-509E-11D1-A7CC-0000F87571E3}][{3610EDA5-77EF-11D2-8DC5-00C04FA31A66}{0F6B957D-509E-11D1-A7CC-0000F87571E3}][{42B5FAAE-6536-11D2-AE5A-0000F87571E3}{40B6664F-4972-11D1-A7CA-0000F87571E3}][{4CFB60C1-FAA6-47F1-89AA-0B18730C9FD3}{0F6B957D-509E-11D1-A7CC-0000F87571E3}][{827D319E-6EAC-11D2-A4EA-00C04F79F83A}{803E14A0-B4FB-11D0-A0D0-00A0C90F574B}]
    >>>> Version=6488106
    >>>>
    >> gPCUserExtensionNames=[{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{42B5FAAE-6536-11D2-AE5A-0000F87571E3}{40B66650-4972-11D1-A7CA-0000F87571E3}][{4CFB60C1-FAA6-47F1-89AA-0B18730C9FD3}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{A2E30F80-D7DE-11D2-BBDE-00C04F86AE3B}{FC715823-C5FB-11D1-9EEF-00A0C90347FF}]
    >>>>
    >>>>
    >>>
    >>> This is the version I cleaned up:
    >>>> [General]
    >>>> gPCFunctionalityVersion=2
    >>>>
    >> gPCUserExtensionNames=[{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{4CFB60C1-FAA6-47F1-89AA-0B18730C9FD3}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{A2E30F80-D7DE-11D2-BBDE-00C04F86AE3B}{FC715823-C5FB-11D1-9EEF-00A0C90347FF}]
    >>>>
    >> gPCUserExtensionNames=[{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{A2E30F80-D7DE-11D2-BBDE-00C04F86AE3B}{FC715823-C5FB-11D1-9EEF-00A0C90347FF}]
    >>>>
    >>>>
    >>>
    >>> I'm not sure how to get Zenworks to use the cleaned up version nor
    >> and
    >>> I too sure what those extra extensions are and how they got in there.
    >> I
    >>> may need to contact Novell in regards to this, but since I'm already
    >>> working on an SR with them I figured I'd go ahead and post here
    >> first.
    >>>
    >>> Any help or advice would be greatly appreciated.
    >>>
    >>>
    >>
    >>
    >> --
    >> Craig Wilson - MCNE, MCSE, CCNA
    >> Novell Knowledge Partner
    >>
    >> Novell does not officially monitor these forums.
    >>
    >> Suggestions/Opinions/Statements made by me are solely my own.
    >> These thoughts may not be shared by either Novell or any rational
    >> human.
    >
    >
    Craig Wilson - MCNE, MCSE, CCNA
    Novell Knowledge Partner
    Novell does not officially monitor these forums.
    Suggestions/Opinions/Statements made by me are solely my own.
    These thoughts may not be shared by either Novell or any rational human.

  • System Image Restore Fails "No disk that can be used for recovering the system disk can be found"

    Greetings    
                                        - Our critical server image backup Fails on one
    server -
    Two 2008 R2 servers. Both do a nightly "Windows Server Backup" of Bare Metal Recovery, System State, C:, System Reserved partition, to another storage hard drive on the same machine as the source. Active Directory is on the C: The much larger D: data
    partition on each source hard drive is not included.
    Test recovery by disconnecting 500G System drive, booting from 2008R2 Install DVD, recovering to a new 500G SATA hard drive.
    Server A good.
    Server B fails. It finds the backed-up image, & then we can select the date we want. As soon as the image restore is beginning and the timeline appears, it bombs with "The system image restore failed. No disk that can be used for recovering the system
    disk can be found." There is a wordy Details message but none of it seems relevant (we are not using USB etc).
    At some point after this, in one (or two?) of the scenarios below, (I forget exactly where) we also got :
    "The system image restore failed. (0x80042403)"
    The destination drive is Not "Excluded".
    Used   diskpart clean   to remove volumes from destination drive. Recovery still errored.
    Tried a second restore-to drive, same make/model Seagate ST3500418AS, fails.
    Tried the earliest dated B image rather than the most recent, fail.
    The Server B backups show as "Success" each night.
    Copied image from B to the same storage drive on A where the A backup image is kept, and used the A hardware to attempt restore. Now only the latest backup date is available (as would occur normally if we had originally saved the backup to a network location).
    Restore still fails.         It looks like its to do with the image rather than with the hardware.
    Tried unticking "automatically check and update disk error info", still fail.
    Server A  SRP 100MB  C: 50.6GB on Seagate ST3500418AS 465.76GB  Microsoft driver 6.1.7600.16385   write cache off
    Server B  SRP 100MB  C: 102GB  on Seagate ST3500418AS 465.76GB  Microsoft driver 6.1.7600.16385   write cache off
    Restore-to hard drive is also Seagate ST3500418AS.
    http://social.answers.microsoft.com/Forums/en-US/w7repair/thread/e855ee43-186d-4200-a032-23d214d3d524      Some people report success after diskpart clean, but not us.
    http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/31595afd-396f-4084-b5fc-f80b6f40dbeb
    "If your destination disk has a lower capacity than the source disk, you need to go into the disk manager and shrink each partition on the source disk before restoring."  Doesnt apply here.
    http://benchmarkreviews.com/index.php?option=com_content&task=view&id=439&Itemid=38&limit=1&limitstart=4
    for 0x80042403 says "The solution is really quite simple: the destination drive is of a lower capacity than the image's source drive." I cant see that here.
    Thank you so much.

    Hello,
    1. While recovering the OS to the new Hard disk, please don't keep the original boot disk attached to the System. There is a Disk signature for each hard disk. The signature will collide if the original boot disk signature is assigned to the new disk.
    You may attach the older disk after recovering the OS. If you want to recover data to the older disk then they should be attached as they were during backup.
    2. Make sure that the new boot disk is attached as the First Boot disk in hardware (IDE/SATA port 0/master) and is the first disk in boot order priority.
    3. In Windows Recovery Env (WinRE) check the Boot disk using: Cmd prompt -> Diskpart.exe -> Select Disk = System. This will show the disk where OS restore will be attempted. If the disk is different than the intended 2 TB disk then swap the disks in
    correct order in the hardware.
    4. Please make sure that the OS is always recovered to the System disk. (Due to an issue: BMR might recover the OS to some other disk if System disk is small in size. Here the OS won't boot. If you belive this is the case, then you should attach the
    bigger sized disk as System disk and/or exclude other disks from recovery). Disk exclusion is provided in System Image Restore/Complete PC Restore UI/cmdline. 
    5. Make sure that Number and Size of disks during restore match the backup config. Apart from boot volumes, some other volumes are also considered critical if there are services/roles installed on them. These disks will be marked critical for recovery and
    should be present with minimum size requirement.
    6. Some other requirements are discussed in following newsgroup threads:
    http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/871a0216-fbaf-4a0c-83aa-1e02ae90dbe4
    http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/9a082b90-bd7c-46f8-9eb3-9581f9d5efdd
    http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/11d8c552-a841-49ac-ab2e-445e6f95e704
    Regards,
    Vikas Ranjan [MSFT]
    ------- This information is provided as-is without any warranties, implicit or explicit.-------

  • Unit test fails after upgrading to Kodo 4.0.0 from 4.0.0-EA4

    I have a group of 6 unit tests failing after upgrading to the new Kodo
    4.0.0 (with BEA) from Kodo-4.0.0-EA4 (with Solarmetric). I'm getting
    exceptions like the one at the bottom of this email. It seems to be an
    interaction with the PostgreSQL driver, though I can't be sure. I
    haven't changed my JDO configuration or the related classes in months
    since I've been focusing on using the objects that have already been
    defined. The .jdo, .jdoquery, and .java code are below the exception,
    just in case there's something wrong in there. Does anyone have advice
    as to how I might debug this?
    Thanks,
    Mark
    Testsuite: edu.ucsc.whisper.test.integration.UserManagerQueryIntegrationTest
    Tests run: 15, Failures: 0, Errors: 6, Time elapsed: 23.308 sec
    Testcase:
    testGetAllUsersWithFirstName(edu.ucsc.whisper.test.integration.UserManagerQueryIntegrationTest):
    Caused an ERROR
    The column index is out of range: 2, number of columns: 1.
    <2|false|4.0.0> kodo.jdo.DataStoreException: The column index is out of
    range: 2, number of columns: 1.
    at
    kodo.jdbc.sql.DBDictionary.newStoreException(DBDictionary.java:4092)
    at kodo.jdbc.sql.SQLExceptions.getStore(SQLExceptions.java:82)
    at kodo.jdbc.sql.SQLExceptions.getStore(SQLExceptions.java:66)
    at kodo.jdbc.sql.SQLExceptions.getStore(SQLExceptions.java:46)
    at
    kodo.jdbc.kernel.SelectResultObjectProvider.handleCheckedException(SelectResultObjectProvider.java:176)
    at
    kodo.kernel.QueryImpl$PackingResultObjectProvider.handleCheckedException(QueryImpl.java:2460)
    at
    com.solarmetric.rop.EagerResultList.<init>(EagerResultList.java:32)
    at kodo.kernel.QueryImpl.toResult(QueryImpl.java:1445)
    at kodo.kernel.QueryImpl.execute(QueryImpl.java:1136)
    at kodo.kernel.QueryImpl.execute(QueryImpl.java:901)
    at kodo.kernel.QueryImpl.execute(QueryImpl.java:865)
    at kodo.kernel.DelegatingQuery.execute(DelegatingQuery.java:787)
    at kodo.jdo.QueryImpl.executeWithArray(QueryImpl.java:210)
    at kodo.jdo.QueryImpl.execute(QueryImpl.java:137)
    at
    edu.ucsc.whisper.core.dao.JdoUserDao.findAllUsersWithFirstName(JdoUserDao.java:232)
    at
    edu.ucsc.whisper.core.manager.DefaultUserManager.getAllUsersWithFirstName(DefaultUserManager.java:252)
    NestedThrowablesStackTrace:
    org.postgresql.util.PSQLException: The column index is out of range: 2,
    number of columns: 1.
    at
    org.postgresql.core.v3.SimpleParameterList.bind(SimpleParameterList.java:57)
    at
    org.postgresql.core.v3.SimpleParameterList.setLiteralParameter(SimpleParameterList.java:101)
    at
    org.postgresql.jdbc2.AbstractJdbc2Statement.bindLiteral(AbstractJdbc2Statement.java:2085)
    at
    org.postgresql.jdbc2.AbstractJdbc2Statement.setInt(AbstractJdbc2Statement.java:1133)
    at
    com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
    at
    com.solarmetric.jdbc.PoolConnection$PoolPreparedStatement.setInt(PoolConnection.java:440)
    at
    com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
    at
    com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
    at
    com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
    at
    com.solarmetric.jdbc.LoggingConnectionDecorator$LoggingConnection$LoggingPreparedStatement.setInt(LoggingConnectionDecorator.java:1
    257)
    at
    com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
    at
    com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
    at kodo.jdbc.sql.DBDictionary.setInt(DBDictionary.java:980)
    at kodo.jdbc.sql.DBDictionary.setUnknown(DBDictionary.java:1299)
    at kodo.jdbc.sql.SQLBuffer.setParameters(SQLBuffer.java:638)
    at kodo.jdbc.sql.SQLBuffer.prepareStatement(SQLBuffer.java:539)
    at kodo.jdbc.sql.SQLBuffer.prepareStatement(SQLBuffer.java:512)
    at kodo.jdbc.sql.SelectImpl.execute(SelectImpl.java:332)
    at kodo.jdbc.sql.SelectImpl.execute(SelectImpl.java:301)
    at kodo.jdbc.sql.Union$UnionSelect.execute(Union.java:642)
    at kodo.jdbc.sql.Union.execute(Union.java:326)
    at kodo.jdbc.sql.Union.execute(Union.java:313)
    at
    kodo.jdbc.kernel.SelectResultObjectProvider.open(SelectResultObjectProvider.java:98)
    at
    kodo.kernel.QueryImpl$PackingResultObjectProvider.open(QueryImpl.java:2405)
    at
    com.solarmetric.rop.EagerResultList.<init>(EagerResultList.java:22)
    at kodo.kernel.QueryImpl.toResult(QueryImpl.java:1445)
    at kodo.kernel.QueryImpl.execute(QueryImpl.java:1136)
    at kodo.kernel.QueryImpl.execute(QueryImpl.java:901)
    at kodo.kernel.QueryImpl.execute(QueryImpl.java:865)
    at kodo.kernel.DelegatingQuery.execute(DelegatingQuery.java:787)
    at kodo.jdo.QueryImpl.executeWithArray(QueryImpl.java:210)
    at kodo.jdo.QueryImpl.execute(QueryImpl.java:137)
    at
    edu.ucsc.whisper.core.dao.JdoUserDao.findAllUsersWithFirstName(JdoUserDao.java:232)
    --- DefaultUser.java -------------------------------------------------
    public class DefaultUser
    implements User
    /** The account username. */
    private String username;
    /** The account password. */
    private String password;
    /** A flag indicating whether or not the account is enabled. */
    private boolean enabled;
    /** The authorities granted to this account. */
    private Set<Authority> authorities;
    /** Information about the user, including their name and text that
    describes them. */
    private UserInfo userInfo;
    /** The set of organizations where this user works. */
    private Set<Organization> organizations;
    --- DefaultUser.jdo --------------------------------------------------
    <?xml version="1.0"?>
    <!DOCTYPE jdo PUBLIC
    "-//Sun Microsystems, Inc.//DTD Java Data Objects Metadata 2.0//EN"
    "http://java.sun.com/dtd/jdo_2_0.dtd">
    <jdo>
    <package name="edu.ucsc.whisper.core">
    <sequence name="user_id_seq"
    factory-class="native(Sequence=user_id_seq)"/>
    <class name="DefaultUser" detachable="true"
    table="whisper_user" identity-type="datastore">
    <datastore-identity sequence="user_id_seq" column="userId"/>
    <field name="username">
    <column name="username" length="80" jdbc-type="VARCHAR" />
    </field>
    <field name="password">
    <column name="password" length="40" jdbc-type="CHAR" />
    </field>
    <field name="enabled">
    <column name="enabled" />
    </field>
    <field name="userInfo" persistence-modifier="persistent"
    default-fetch-group="true" dependent="true">
    <extension vendor-name="jpox"
    key="implementation-classes"
    value="edu.ucsc.whisper.core.DefaultUserInfo" />
    <extension vendor-name="kodo"
    key="type"
    value="edu.ucsc.whisper.core.DefaultUserInfo" />
    </field>
    <field name="authorities" persistence-modifier="persistent"
    table="user_authorities"
    default-fetch-group="true">
    <collection
    element-type="edu.ucsc.whisper.core.DefaultAuthority" />
    <join column="userId" delete-action="cascade"/>
    <element column="authorityId" delete-action="cascade"/>
    </field>
    <field name="organizations" persistence-modifier="persistent"
    table="user_organizations" mapped-by="user"
    default-fetch-group="true" dependent="true">
    <collection
    element-type="edu.ucsc.whisper.core.DefaultOrganization"
    dependent-element="true"/>
    <join column="userId"/>
    <!--<element column="organizationId"/>-->
    </field>
    </class>
    </package>
    </jdo>
    --- DefaultUser.jdoquery ---------------------------------------------
    <?xml version="1.0"?>
    <!DOCTYPE jdo PUBLIC
    "-//Sun Microsystems, Inc.//DTD Java Data Objects Metadata 2.0//EN"
    "http://java.sun.com/dtd/jdo_2_0.dtd">
    <jdo>
    <package name="edu.ucsc.whisper.core">
    <class name="DefaultUser">
    <query name="UserByUsername"
    language="javax.jdo.query.JDOQL"><![CDATA[
    SELECT UNIQUE FROM edu.ucsc.whisper.core.DefaultUser
    WHERE username==searchName
    PARAMETERS java.lang.String searchName
    ]]></query>
    <query name="DisabledUsers"
    language="javax.jdo.query.JDOQL"><![CDATA[
    SELECT FROM edu.ucsc.whisper.core.DefaultUser WHERE
    enabled==false
    ]]></query>
    <query name="EnabledUsers"
    language="javax.jdo.query.JDOQL"><![CDATA[
    SELECT FROM edu.ucsc.whisper.core.DefaultUser WHERE
    enabled==true
    ]]></query>
    <query name="CountUsers"
    language="javax.jdo.query.JDOQL"><![CDATA[
    SELECT count( this ) FROM edu.ucsc.whisper.core.DefaultUser
    ]]></query>
    </class>
    </package>
    </jdo>

    I'm sorry, I have no idea. I suggest sending a test case that
    reproduces the problem to support.

  • HP Laser Printer message saying "System Extension Cannot Be Used"

    I am trying to install a laserjet printer but while it was installing, a message came up which read, "'System Extension Cannot Be Used'   The system extension, "/System/Library/Extensions/AppleUSBEthernetHost.kext' was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an update." We tried the printer out and it seems to work, however, the scanner does not work.
    When I got this Mac Book Pro, 4 or 5 years ago, I had a HP inkjet printer which I can never use the scanning feature because it did not work. I don't remember what the error message was, but it never worked when I tried to use it. I wonder if the problems with scanning have to do with this particular file that is supposedly installed wrongly.
    We tested the printer out and it worked fine. But no scanning. It can't find the scanner.
    My computer is Mac OS X - 10.6.8. The printer is HP Laserjet  Pro 200 color MFP.
    Anyone have any idea what I should do to fix this error? Thanks.

    Open the Script Editor in the /Applications/AppleScript/ folder, copy and paste the entire following line into it, and press the Run button:
    do shell script "chown -R root:wheel /System/Library/Extensions/AppleUSBEthernetHost.kext" with administrator privileges
    If it doesn’t work, choose Go to Folder from the Finder's Go menu, provide /System/Library/Extensions/ as the path, throw the AppleUSBEthernetHost.kext item away, and reinstall iTunes.
    (118910)

  • Hard disk test failed on HP Pavillion dv6-1100eo notebook

    I have a HP Pavilion dv6-1100eo Entertainment Notebook PC  (P/N: NR597EA) with Vista 32-bit.  Unfortunately no warranty left in and general I have been very happy with this notebook.
    However suddenly Wondows would not start up - and it did not even find Startup Recovery partition on the harddisk. As I wasn't sure if this Startup Recovery was on hard disk or not - I ordered System Recovery DVDs for this Scandinavian language version.
    These disks did not work - so I figured I have probably not done my homework before ordering those disks.
    Then I ran system Diagnostics (even if I have a old BIOS version F.03).  On the diagnositics - both Quick and Full Hard disk test failed during the first 1% of the scan.
    Is there anything that can be done - or is the only option new hard disk? In case - what hard disk is recommended that is not too expensive - as I don't want to invest too much into a soon 3 year old notebook.
    I recently bougth an external harddisk (1 TB) based on USB connection. Can that be used bypassing internal HD. In this way I would increase HD capacity and not invest anymore into this notebook - since I already have the recovery DVDs
    It is probably only a time question before I will buy a new HP notebook - that is why I don't want any long permanent fix of this problem.
    This question was solved.
    View Solution.

    Hi,
    Sorry to say, but you won't be able to install or boot Vista from the external HDD, so if you need to get the notebook working, you're going to have to replace the internal drive.
    The drive on the link below is an example of one that would be fine for your notebook.
    500Gb Hard Drive
    The procedure to replace the Hard Drive starts on Page 57 of your Maintenance & Service Guide.
    Once done, simply use your Recovery DVDs to reinstall the Operating System on the new drive.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Could not open error log file ''. Operating system error = 5(failed to retrieve text for this error. Reason: 15105).

    Hello
    When I try to start the SQl server service i get the following error:
    Event id 17058
    Could not open error log file ''. Operating system error = 5(failed to retrieve text for this error. Reason: 15105).
    As a test I have made sure the errorlog file ,and the entire drive it is, has everyone full control permissions, but to no avail. Does anyone have any ideas to resolve this issue?
    Thank you

    Hi,
    Try running:
    SELECT SERVERPROPERTY('ErrorLogFileName')
    Then verify that the account being used to run the SQL Server service account has access to the path output above.  If possible, you could try logging onto the server with the same account used to run SQL Server then navigate to the errorlog folder.
    Thanks,
    Andrew Bainbridge
    SQL Server DBA
    Please click "Propose As Answer" if a post solves your problem, or "Vote As Helpful" if a post has been useful to you

  • System Connection Test was not fully tested but all web dynpro java app and Transaction iviews working fine.Any problem for this Kind of activity Lets give some idea.

    System Connection Tests
    You can test the connectivity to the backend application represented by the current system object. Choose the relevant tests.
    Note: The test is based on the properties currently defined in the system object. It does not check if the system properties are correct.
    System Connection Tests
    Test Name
    Description
    Status
    SAP Web AS Connection
    Tests the connection to an SAP Web Application Server
    ITS Connection
    Tests the connection to an SAP ITS server
    Connection Test for Connectors
    Tests the connection to a backend system using an associated connector
    Test
    Clear Results
    Results
    SAP Web AS Connection
    Test Details:
    The test consists of the following steps:
    1. Checks the validity of system ID in the system object.
    2. Checks if the system can be retrieved from the PCD.
    3. Check whether a SAP system is defined in the system object
    4. Validate the following parameters: WAS protocol; WAS host name
    5. Checks if the host name of the server can be resolved.
    6. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
    7. Checks HTTP/S connectivity to the defined back-end application
    Results
    1. The system ID is valid
    2. The system was retrieved.
    3. The system object represents an SAP system
    4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name 
    5. The host name ssprdxi.stylespasapnet.com was resolved successfully.
    6. The Web AS ping service was pinged successfully.
    7. An HTTP/S connection to was obtained successfully.
    ITS Connection
    Test Details:
    The test consists of the following steps:
    1. Checks the validity of system ID in the system object.
    2. Checks if the system can be retrieved from the PCD.
    3. Check whether the system object has a valid system alias
    4. Check whether a SAP system is defined in the system object
    5. Validate the following parameters: ITS protocol; ITS host name
    6. Checks if the host name of the server can be resolved.
    7. Checks HTTP/S connectivity to the defined back-end application
    Results
    1. The system ID is valid
    2. The system was retrieved.
    3. Retrieval of the default alias was successful
    4. The system object represents an SAP system
    5. The following parameters are valid: ITS Protocol (http) ITS Host Name ()
    6. The host name ssprdxi.stylespasapnet.com was resolved successfully.
    7. An HTTP/S connection to was obtained successfully.
    Test Connection with Connector
    Test Details:
    The test consists of the following steps:
    1. Retrieve the default alias of the system
    2. Check the connection to the backend application using the connector defined in this system object
    Results
    Retrieval of default alias successful
    Connection failed. Make sure that Single Sign-On is configured correctly
    regards
    Antony

    Hi Stefan,
    This correct see SAP Note [947081|https://service.sap.com/sap/support/notes/947081]
    If the locale for the Web Dynpro iView is changed in the portal (through portal personalization), this is not reflected in the running login session. The user needs to logoff and login again, in order to see the locale change in the Web Dynpro iView.
    Regards,
    Leo

Maybe you are looking for