System fails to install win 7pro

good day all,
i transferred a working harddisk ,40GB, from one desktop A to another B, then went to the BIOS to set it as the first booting device. when i tried to install windows 7 pro on desktop B( hp compaq evo, 2GHZ, 40GB HDD, 512MB RAM) , after deleting the partitions and clicked next, i got this error message "windows cannot be installed on this disk, this computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu". error code 0x800705AA.
presently i am stuck here.

>a) Would going into the same user in Safe Mode have fixed it?
not alone, unless the problem was with a component instead of an installer confusion in the temp folder.
>b) I gave up on clearing temp folders a long time ago because of a lack of results. Explain to me the steps of clearing temp folders, maybe I've always done it wrong
I usually leave mine alone too- well every now and then. just delete all the files from them you can (c:\docs & settings\user\local settings\temp, c:\temp, c:\windows\temp)
usually there's no problem but occasionally an installer will leave part of itself in temp where by odd coincidence (or not so odd, because there are relatively few install apps that systems use - wise and install shield probably 2 of the most used) has a file that's got the same name as one the new installer expects. so it starts reading from that one instead. now the whole install gets screwy.
>However I have seen some success with grabbing the hidden Install Wizard folder and dragging it to the desktop, doing the install, the putting it back.
yes, me too. saves time when troubleshooting and the app that fails to install keeps deleting the install files! :)
> The way I see it, just get on a new admin install the thing, then delete the user. Who cares "why?" if it works, right?
oh, i misunderstood. i thought you were advocating KEEPING that new admin user as the main user. that's what i mean is a pita having to move settings over from the old acct. to the new one... i guess that CAN work, sometimes, but not always. some apps (not sure if photoshop is among them) want you to install under the user account that will be running it.
just another tool to keep in the arsenal... :)

Similar Messages

Photoshop 7 Fails to Install WIN XP SP3

Hi: I can not get a new in the box version of PS 7 to install on WIN XP SP3. Using D:\Photoshop\Setup.exe sometimes nothing happens, then 10 minutes later the opening screen shows up, click NEXT, then accept the T&Cs, then the progress bar shows no progress. <CTRL><ALT><DEL> shows not responding. There are a couple of FAQs relating to permissions. This computer has a single user and in Control Panel - User Accounts - this account is the administrator. Please help since Adobe does not support this product. Brooke Clarke [email protected]

>a) Would going into the same user in Safe Mode have fixed it?
not alone, unless the problem was with a component instead of an installer confusion in the temp folder.
>b) I gave up on clearing temp folders a long time ago because of a lack of results. Explain to me the steps of clearing temp folders, maybe I've always done it wrong
I usually leave mine alone too- well every now and then. just delete all the files from them you can (c:\docs & settings\user\local settings\temp, c:\temp, c:\windows\temp)
usually there's no problem but occasionally an installer will leave part of itself in temp where by odd coincidence (or not so odd, because there are relatively few install apps that systems use - wise and install shield probably 2 of the most used) has a file that's got the same name as one the new installer expects. so it starts reading from that one instead. now the whole install gets screwy.
>However I have seen some success with grabbing the hidden Install Wizard folder and dragging it to the desktop, doing the install, the putting it back.
yes, me too. saves time when troubleshooting and the app that fails to install keeps deleting the install files! :)
> The way I see it, just get on a new admin install the thing, then delete the user. Who cares "why?" if it works, right?
oh, i misunderstood. i thought you were advocating KEEPING that new admin user as the main user. that's what i mean is a pita having to move settings over from the old acct. to the new one... i guess that CAN work, sometimes, but not always. some apps (not sure if photoshop is among them) want you to install under the user account that will be running it.
just another tool to keep in the arsenal... :)

Failed to install win 8.1 app package on Windows 10

Hi all,
The app package complied with VS2013 on Windows 8.1 fails to install on Windows 10. This is expected ??
The package could be successfully installed on Window 8.1, bug failed on Windows 10. Here is the screen shot.

Hi Dong,
The error message you show give you instructions for looking up the activity ID. Please so that and let us know the result.
Jeff Sanders (MSFT)
@jsandersrocks - Windows Store Developer Solutions
@WSDevSol
Getting Started With Windows Azure Mobile Services development?
Click here
Getting Started With Windows Phone or Store app development?
Click here
My Team Blog: Windows Store & Phone Developer Solutions
My Blog: Http Client Protocol Issues (and other fun stuff I support)
Hi Jeff,
I got the log, paste it here. Thanks.
PS C:\Users\dong> Get-AppxLog -ActivityID a1fac9b5-6bd0-0003-b06a-29a4d06bd001
Time ID Message
4/2/2015 9:37:26 AM 301 The calling process is C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe
4/2/2015 9:37:26 AM 604 Started deployment Add operation on a package with main parameter: file:///D:/pr
ojects/win81app/AppPackages/win81app/win81app_1.0.0.0_Win32_Test/win81app_1.0.0.
0_Win32.appx, dependency parameters: file:///D:/projects/win81app/AppPackages/wi
n81app/win81app_1.0.0.0_Win32_Test/Dependencies/x86/Microsoft.VCLibs.x86.12.00.a
ppx, file:///D:/projects/win81app/AppPackages/win81app/win81app_1.0.0.0_Win32_Te
st/Dependencies/x64/Microsoft.VCLibs.x64.12.00.appx and Options:
ForceApplicationShutdownOption. See
http://go.microsoft.com/fwlink/?LinkId=235160 for help diagnosing app
deployment issues.
4/2/2015 9:37:26 AM 157 The app package signature was validated for core content of the app package
published by CN=dong. Payload won't be validated until the files are read.
4/2/2015 9:37:26 AM 170 The streaming reader was created successfully for app package
fec010c0-306b-4e7e-88fd-52bdfdcb8fda_1.0.0.0_x86__92cw22eayst0g.
4/2/2015 9:37:26 AM 157 The app package signature was validated for core content of the app package
published by CN=Microsoft Corporation, O=Microsoft Corporation, L=Redmond,
S=Washington, C=US. Payload won't be validated until the files are read.
4/2/2015 9:37:26 AM 170 The streaming reader was created successfully for app package
Microsoft.VCLibs.120.00_12.0.21005.1_x86__8wekyb3d8bbwe.
4/2/2015 9:37:26 AM 157 The app package signature was validated for core content of the app package
published by CN=Microsoft Corporation, O=Microsoft Corporation, L=Redmond,
S=Washington, C=US. Payload won't be validated until the files are read.
4/2/2015 9:37:26 AM 170 The streaming reader was created successfully for app package
Microsoft.VCLibs.120.00_12.0.21005.1_x64__8wekyb3d8bbwe.
4/2/2015 9:37:26 AM 10002 Creating Resiliency File C:\ProgramData\Microsoft\Windows\AppRepository\4f281c8e
-bfc1-465e-bd8d-538fd2991196_S-1-5-21-1213812938-303559523-3196125145-1000_3.rsl
c for Add Operation on Package
fec010c0-306b-4e7e-88fd-52bdfdcb8fda_1.0.0.0_x86__92cw22eayst0g.
4/2/2015 9:37:26 AM 607 Deployment Add operation on package
fec010c0-306b-4e7e-88fd-52bdfdcb8fda_1.0.0.0_x86__92cw22eayst0g has been
de-queued and is running for user WIN-TNFE02CEC5L\dong.
4/2/2015 9:37:26 AM 613 Adding uri to the list of Uris: file:///D:/projects/win81app/AppPackages/win81ap
p/win81app_1.0.0.0_Win32_Test/win81app_1.0.0.0_Win32.appx.
4/2/2015 9:37:26 AM 613 Adding uri to the list of Uris: file:///D:/projects/win81app/AppPackages/win81ap
p/win81app_1.0.0.0_Win32_Test/Dependencies/x86/Microsoft.VCLibs.x86.12.00.appx.
4/2/2015 9:37:26 AM 613 Adding uri to the list of Uris: file:///D:/projects/win81app/AppPackages/win81ap
p/win81app_1.0.0.0_Win32_Test/Dependencies/x64/Microsoft.VCLibs.x64.12.00.appx.
4/2/2015 9:37:26 AM 605 The last successful state reached was BundleProcessed. Failure occurred before
reaching the next state Indexed.
4/2/2015 9:37:26 AM 401 Deployment Add operation with target volume C: on Package
fec010c0-306b-4e7e-88fd-52bdfdcb8fda_1.0.0.0_x86__92cw22eayst0g from: (file:///
D:/projects/win81app/AppPackages/win81app/win81app_1.0.0.0_Win32_Test/win81app_1
.0.0.0_Win32.appx) failed with error 0x80073CF9. See
http://go.microsoft.com/fwlink/?LinkId=235160 for help diagnosing app
deployment issues.
4/2/2015 9:37:26 AM 404 AppX Deployment operation failed for package
fec010c0-306b-4e7e-88fd-52bdfdcb8fda_1.0.0.0_x86__92cw22eayst0g with error
0x80073CF9. The specific error text for this failure is: Deployment Add
operation with target volume C: on Package
fec010c0-306b-4e7e-88fd-52bdfdcb8fda_1.0.0.0_x86__92cw22eayst0g from: (file:///
D:/projects/win81app/AppPackages/win81app/win81app_1.0.0.0_Win32_Test/win81app_1
.0.0.0_Win32.appx) failed with error 0x80073CF9. See
http://go.microsoft.com/fwlink/?LinkId=235160 for help diagnosing app
deployment issues.
PS C:\Users\dong>
Regards.
Dong.

System failed after install essbase client on 11.1.2.3

I have done a install and config of 11.1.2.3 for essbase and planning
after completion I run the diagnostics green light all the way
i install the EAS Client Restart the server and then everything fails
Diagnostics
Generated on 08/31/2013 00:51 AM
Validation run on NextLevelServer
Build version: 11.1.2.3.0.8719
EPM System Diagnostics info: 11.1.2.3.0 drop 27 build 8414-on-03/21/2013 10:40 AM
OS name: Windows Server 2008 R2
OS version: 6.1
EPM System Instance location: C:\Oracle\Middleware\user_projects\epmsystem1
Test Status Service Test Description Duration
Hyperion Foundation
FAILED Audit Validating that Audit has been initialized
Error: Checker execution failed.
Recommended Action: Refer to the validation logs for exception details.
4 seconds
FAILED CES Validating that CES has been initialized
Error: Checker execution failed.
Recommended Action: Refer to the validation logs for exception details.
4 seconds
WARNING CFG: Configuration Validating that configuration tasks have been completed
EPMVLD-01004: The following configuration tasks have not been completed:
Configure Web Server: Pending
Configure Database: Pending
Configure: Pending
Configure Common Settings: Pending
Configure Oracle Configuration Manager: Pending
0 seconds
FAILED CSS Validating that CSS has been initialized
Error: Checker execution failed.
Recommended Action: Refer to the validation logs for exception details.
4 seconds
FAILED EXT: External Authentication Checker execution failed.
Error: EPMCSS-00000: Failed to process request. Internal server error. Refer EPM Shared Services Security log file for related errors.
Recommended Action: Refer to the validation logs for exception details.
8 seconds
FAILED HUB Validating that HUB has been initialized
Error: Checker execution failed.
Recommended Action: Refer to the validation logs for exception details.
4 seconds
PASSED WEB: Permissions All HIT entries are present in system-jazn-data.xml
0 seconds
FAILED LCM Validating that LCM has been initialized
Error: Checker execution failed.
Recommended Action: Refer to the validation logs for exception details.
4 seconds
FAILED Single Sign-On Checker execution failed.
Error: Checker execution failed.
Recommended Action: Refer to the validation logs for exception details.
2 seconds
FAILED LNK: Registry Checking that all components in the registry have a link to host
Error: Checker execution failed.
Recommended Action: Refer to the validation logs for exception details.
0 seconds
PASSED CFG: Environment Checking whether system path variable length exceeds 2,000
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component SHARED_SERVICES_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
FAILED Registry Validating that Registry has been initialized
Error: Checker execution failed.
Recommended Action: Refer to the validation logs for exception details.
4 seconds
EPM System Registry
Essbase / Essbase
WARNING CFG: Configuration Validating that configuration tasks have been completed
EPMVLD-01004: The following configuration tasks have not been completed:
Configure Essbase Server: Pending
Register with Shared Services: Pending
Configure: Pending
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component ESSBASE_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
Essbase / Essbase Administration Services
WARNING CFG: Configuration Validating that configuration tasks have been completed
EPMVLD-01004: The following configuration tasks have not been completed:
Configure Database: Pending
Register with Shared Services: Pending
Configure: Pending
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component ESSBASE_ADMINISTRATION_SERVICES_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component ESSBASE_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
Essbase / Essbase Integration Services
WARNING CFG: Configuration Validating that configuration tasks have been completed
EPMVLD-01004: The following configuration tasks have not been completed:
Configure Essbase Integration Services: Pending
Configure: Pending
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component ESSBASE_INTEGRATION_SERVER_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component ESSBASE_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
Essbase / Essbase Studio
WARNING CFG: Configuration Validating that configuration tasks have been completed
EPMVLD-01004: The following configuration tasks have not been completed:
Configure Database: Pending
Register with Shared Services: Pending
Configure: Pending
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component ESSBASE_STUDIO_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component ESSBASE_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
Essbase / Provider Services
WARNING CFG: Configuration Validating that configuration tasks have been completed
EPMVLD-01004: The following configuration tasks have not been completed:
Configure: Pending
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component ESSBASE_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
Foundation / Calculation Manager
WARNING CFG: Configuration Validating that configuration tasks have been completed
EPMVLD-01004: The following configuration tasks have not been completed:
Configure Database: Pending
Register with Shared Services: Pending
Configure: Pending
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component CALC_MANAGER_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
Foundation / Performance Management Architect
FAILED AppMgrLoadAdf Launch external checker with next command: C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_35/bin/java -DEPM_ORACLE_HOME=C:\Oracle\Middleware\EPMSystem11R1 -DEPM_ORACLE_INSTANCE=C:\Oracle\Middleware\user_projects\epmsystem1 -Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration -Doracle.core.ojdl.logging.config.file=C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.appmanager.AppMgrLoadAdf
Error: AppMgrLoadAdf failed on initialization. Please check all registry information is valid and that HSS is running.
Recommended Action: Make sure external checker is working.
11 seconds
WARNING CFG: Configuration Validating that configuration tasks have been completed
EPMVLD-01004: The following configuration tasks have not been completed:
Create EPMA Virtual Directory: Pending
Configure Database: Pending
Register with Shared Services: Pending
Configure: Pending
0 seconds
FAILED DimEditorLoadAdf Launch external checker with next command: C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_35/bin/java -DEPM_ORACLE_HOME=C:\Oracle\Middleware\EPMSystem11R1 -DEPM_ORACLE_INSTANCE=C:\Oracle\Middleware\user_projects\epmsystem1 -Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration -Doracle.core.ojdl.logging.config.file=C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.dimeditor.DimEditorLoadAdf
Error: DimEditorLoadAdf failed on initialization. Please check all registry information is valid and that HSS is running.
Recommended Action: Make sure external checker is working.
12 seconds
FAILED EnumApplications Launch external checker with next command: C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_35/bin/java -DEPM_ORACLE_HOME=C:\Oracle\Middleware\EPMSystem11R1 -DEPM_ORACLE_INSTANCE=C:\Oracle\Middleware\user_projects\epmsystem1 -Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration -Doracle.core.ojdl.logging.config.file=C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.repository.EnumApplications
Error: EnumApplications failed on initialization. Please check all registry information is valid and that HSS is running.
Recommended Action: Make sure external checker is working.
11 seconds
FAILED EnumDataSyncs Launch external checker with next command: C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_35/bin/java -DEPM_ORACLE_HOME=C:\Oracle\Middleware\EPMSystem11R1 -DEPM_ORACLE_INSTANCE=C:\Oracle\Middleware\user_projects\epmsystem1 -Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration -Doracle.core.ojdl.logging.config.file=C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.repository.EnumDataSyncs
Error: EnumDataSyncs failed on initialization. Please check all registry information is valid and that HSS is running.
Recommended Action: Make sure external checker is working.
11 seconds
FAILED EnumDimensions Launch external checker with next command: C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_35/bin/java -DEPM_ORACLE_HOME=C:\Oracle\Middleware\EPMSystem11R1 -DEPM_ORACLE_INSTANCE=C:\Oracle\Middleware\user_projects\epmsystem1 -Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration -Doracle.core.ojdl.logging.config.file=C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.dimeditor.EnumDimensions
Error: EnumDimensions failed on initialization. Please check all registry information is valid and that HSS is running.
Recommended Action: Make sure external checker is working.
11 seconds
FAILED PMAJ: EPMA Service Validating whether jobmanager service is available.
Error: EPMVLD-01006: The EPMA service is not available. Check the log files for details.
Recommended Action: Check that the server is running.
0 seconds
FAILED DSC: EPMA DimensionServer Server Configuration Validating EPMA Dimension Server hyperion-bpma-server startup... Failed...
Error: Dimension server was not found in Shared Services Registry.
Recommended Action: Check application is started.
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component EPMA_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
Foundation / Workspace
PASSED CFG: Configuration Validating that configuration tasks have been completed
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component WORKSPACE was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
PASSED REG: Registry All links are present in the registry.
0 seconds
Planning
WARNING CFG: Configuration Validating that configuration tasks have been completed
EPMVLD-01004: The following configuration tasks have not been completed:
Configure Database: Pending
Register with Shared Services: Pending
Configure: Pending
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component PLANNING_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
Test start time: 08/31/2013 00:49 AM
Test end time: 08/31/2013 00:51 AM
Total test duration: 102 seconds
Please advise
this is the second time this has happen

What I am doing is again running the Start EPM system from Foundation services
and then I will check to see if the service are up
Thanks I try that
Restarted the epmsystem
but the Oracle database is down
have to find out how to start
database error
Database Instance: Hyperion
Enterprise Manager is not able to connect to the database instance. The state of the components are listed below. Page Refreshed Aug 31, 2013 2:19:45 AM EDT
Database Instance
Host localhost
Port 1521
SID Hyperion
Oracle Home C:\app\Administrator\product\11.2.0\dbhome_1
Listener
Status Down
Host localhost
Port 1521
Name LISTENER
Oracle Home C:\app\Administrator\product\11.2.0\dbhome_1
Location C:\app\Administrator\product\11.2.0\dbhome_1\network\admin
Details TNS-12541: TNS:no listener
Agent Connection to Instance
Status Failed
Details ORA-12541: TNS:no listener (DBD ERROR: OCIServerAttach)
SQL*Plus: Release 11.2.0.1.0 Production on Sat Aug 31 02:50:09 2013
Copyright (c) 1982, 2010, Oracle. All rights reserved.
SQL> Connected to an idle instance.
SQL> SQL> ORA-00119: invalid specification for system parameter LOCAL_LISTENER
ORA-00132: syntax error or unresolved network name 'LISTENER_HYPERION'
Disconnected
i went to server server and start the oracle listener
but the database will not start up
Please advise

Service for network file system fails to install

Installation of the File Service and Service for NFS in Windows 2008 R2 server fails. Following are the steps used to perform the install.
Open Server Manager from Start> All Programs> Administrative Tools> Server Manager.
Click on the Roles node in the left pane, and then click the
Add Roles link.
On the Add Roles Wizard welcome page, click Next to continue.
From the list of roles to install, select File Services, and click
Next to continue.
On the Introduction to File Services page, click Next to continue.
On the Select Role Services page, keep the File Server box checked and select
Services for Network File System. Click Next to continue.
On the Confirmation page, review the settings and click the Install button.
Click Close when the wizard completes.
ServerManager Log:
From the ServerManager.log file under C:/Windows/Logs I can see the below.
2272: 2013-02-12 16:13:51.479 [CBS] IsCacheStillGood: True.
2272: 2013-02-12 16:14:05.534 [Provider] System changed since last refresh: False
2272: 2013-02-12 16:15:45.816 [InstallationProgressPage] Loading progress page...
2272: 2013-02-12 16:15:45.831 [InstallationProgressPage] Begining Sync operation...
2272: 2013-02-12 16:15:45.842 [Sync]
Sync Graph of changed nodes
==========
name : File Services
state : Changed
rank : 1
sync tech: CBS
guest[1] : File Server
guest[2] : Distributed File System
guest[3] : File Server Resource Manager
guest[4] : Services for Network File System
guest[5] : Single Instance Storage
guest[6] : Windows Search Service
guest[7] : Windows Server 2003 File Services
guest[8] : BranchCache for network files
provider : FileServerRoleProvider
name : Services for Network File System
state : Changed
rank : 2
sync tech: CBS
provider : FileServerRoleProvider
name : File Server
state : Changed
rank : 2
sync tech: CBS
provider : FileServerRoleProvider
2272: 2013-02-12 16:15:45.842 [Sync] Calling sync provider of Services for Network File System ...
2272: 2013-02-12 16:15:45.843 [FileServer] Sync:: guest: 'Services for Network File System', guest deleted?: False
2272: 2013-02-12 16:15:45.843 [FileServer] Begin installation of 'Services for Network File System'...
2272: 2013-02-12 16:15:45.843 [FileServer] Install: Guest: 'Services for Network File System', updateElement: 'ServicesForNFS-ServerAndClient;ClientForNFS-Infrastructure;NFS-Administration;ServerForNFS-Infrastructure'
2272: 2013-02-12 16:15:45.843 [FileServer] Installation queued for 'Services for Network File System'.
2272: 2013-02-12 16:15:45.843 [Sync] Calling sync provider of File Server ...
2272: 2013-02-12 16:15:45.843 [FileServer] Sync:: guest: 'File Server', guest deleted?: False
2272: 2013-02-12 16:15:45.843 [FileServer] Begin installation of 'File Server'...
2272: 2013-02-12 16:15:45.843 [FileServer] Install: Guest: 'File Server', updateElement: 'CoreFileServer'
2272: 2013-02-12 16:15:45.843 [FileServer] Installation queued for 'File Server'.
2272: 2013-02-12 16:15:45.844 [CBS] installing 'ServicesForNFS-ServerAndClient ClientForNFS-Infrastructure
NFS-Administration ServerForNFS-Infrastructure CoreFileServer ' ...
2272: 2013-02-12 16:15:46.315 [CBS] ...parents that will be auto-installed: '<none>'
2272: 2013-02-12 16:15:46.316 [CBS] ...default children to turn-off: '<none>'
2272: 2013-02-12 16:15:46.325 [CBS] ...current state of 'ServicesForNFS-ServerAndClient': p:
Staged, a: Staged, s: UninstallRequested
2272: 2013-02-12 16:15:46.325 [CBS] ...setting state of 'ServicesForNFS-ServerAndClient' to
'InstallRequested'
2272: 2013-02-12 16:15:46.335 [CBS] ...current state of 'ClientForNFS-Infrastructure': p: Staged,
a: Staged, s: UninstallRequested
2272: 2013-02-12 16:15:46.336 [CBS] ...setting state of 'ClientForNFS-Infrastructure' to 'InstallRequested'
2272: 2013-02-12 16:15:46.345 [CBS] ...current state of 'NFS-Administration': p: Staged, a:
Staged, s: UninstallRequested
2272: 2013-02-12 16:15:46.345 [CBS] ...setting state of 'NFS-Administration' to 'InstallRequested'
2272: 2013-02-12 16:15:46.354 [CBS] ...current state of 'ServerForNFS-Infrastructure': p: Staged,
a: Staged, s: UninstallRequested
2272: 2013-02-12 16:15:46.354 [CBS] ...setting state of 'ServerForNFS-Infrastructure' to 'InstallRequested'
2272: 2013-02-12 16:15:46.363 [CBS] ...current state of 'CoreFileServer': p: Staged, a: Staged,
s: UninstallRequested
2272: 2013-02-12 16:15:46.363 [CBS] ...setting state of 'CoreFileServer' to 'InstallRequested'
2272: 2013-02-12 16:15:46.373 [CBS] ...'ServicesForNFS-ServerAndClient' : applicability: Applicable
2272: 2013-02-12 16:15:46.390 [CBS] ...'ClientForNFS-Infrastructure' : applicability: Applicable
2272: 2013-02-12 16:15:46.408 [CBS] ...'NFS-Administration' : applicability: Applicable
2272: 2013-02-12 16:15:46.426 [CBS] ...'ServerForNFS-Infrastructure' : applicability: Applicable
2272: 2013-02-12 16:15:46.435 [CBS] ...'CoreFileServer' : applicability: Applicable
2272: 2013-02-12 16:15:46.493 [CbsUIHandler] Initiate:
2272: 2013-02-12 16:15:46.494 [InstallationProgressPage] Installing...
2272: 2013-02-12 16:15:51.958 [CbsUIHandler] Error: -2147021879 :
2272: 2013-02-12 16:15:51.958 [CbsUIHandler] Terminate:
2272: 2013-02-12 16:15:52.035 [InstallationProgressPage] Verifying installation...
2272: 2013-02-12 16:15:52.049 [CBS] ...done installing 'ServicesForNFS-ServerAndClient
ClientForNFS-Infrastructure NFS-Administration ServerForNFS-Infrastructure CoreFileServer '.
Status: -2147021879 (80070bc9)
2272: 2013-02-12 16:15:52.052 [FileServer] Skipped configuration of 'Services for Network File System' because install operation failed.
2272: 2013-02-12 16:15:52.053 [FileServer] Skipped configuration of 'File Server' because install operation failed.
2272: 2013-02-12 16:15:52.053 [Provider]
[STAT] ---- CBS Session Consolidation -----
[STAT] For
 'Services for Network File System',
 'File Server'[STAT] installation(s) took '6.2058637' second(s) total.
[STAT] Configuration(s) took '0.0002143' second(s) total.
[STAT] Total time: '6.206078' second(s).
2272: 2013-02-12 16:15:52.053 [Provider] Error (Id=0) Sync Result - Success: False, RebootRequired: True, Id: 105
2272: 2013-02-12 16:15:52.053 [Provider] Error (Id=0) Sync Message - OperationKind: Install, MessageType: Error, MessageCode: -2147021879, Message: <null>, AdditionalMessage: The requested operation failed. A system reboot
is required to roll back changes made
2272: 2013-02-12 16:15:52.053 [Provider] Error (Id=0) Sync Result - Success: False, RebootRequired: True, Id: 255
2272: 2013-02-12 16:15:52.053 [Provider] Error (Id=0) Sync Message - OperationKind: Install, MessageType: Error, MessageCode: -2147021879, Message: <null>, AdditionalMessage: The requested operation failed. A system reboot
is required to roll back changes made
2272: 2013-02-12 16:15:52.054 [InstallationProgressPage] Sync operation completed
2272: 2013-02-12 16:15:52.054 [InstallationProgressPage] Performing post install/uninstall discovery...
2272: 2013-02-12 16:15:52.056 [Provider] C:\Windows\system32\ServerManager\Cache\CbsUpdateState.bin does not exist.
2272: 2013-02-12 16:15:52.056 [CBS] IsCacheStillGood: False.
2272: 2013-02-12 16:15:52.526 [CBS] >>>GetUpdateInfo--------------------------------------------------
2272: 2013-02-12 16:15:59.342 [CBS] Error (Id=0) Function: 'ReadUpdateInfo()->Update_GetInstallState' failed:
80070bc9 (-2147021879)
2272: 2013-02-12 16:15:59.342 [CBS] <<<GetUpdateInfo--------------------------------------------------
2272: 2013-02-12 16:15:59.380 [DISCOVERY] hr: -2147021879 -> reboot required.
2272: 2013-02-12 16:15:59.390 [InstallationProgressPage] About to load finish page...
2272: 2013-02-12 16:15:59.390 [InstallationFinishPage] Loading finish page
2272: 2013-02-12 16:15:59.401 [InstallationFinishPage] Finish page loaded
In Windows Event long I can see the following events logged:
Event 3002, Port Map:
Windows(R) failed a request to register RPC Port Mapper on TCP port 111. RPC Port Mapper cannot start.
Network File System (NFS) clients use RPC Port Mapper (also known as Portmap and Rpcbind) to discover NFS protocols on remote servers. Without RPC Port Mapper, Server for NFS
cannot start and NFS clients cannot access files on this server.
Verify that no other software is registered on TCP port 111, then start Server for NFS manually (which will also start RPC Port Mapper).
Event 7000, Service Control Manager:
The Server for NFS Open RPC (ONCRPC) Portmapper service failed to start due to the following error:
A device attached to the system is not functioning.
Event 7001, Service Control Manager:
The Server for NFS Driver service depends on the Server for NFS Open RPC (ONCRPC) Portmapper service which failed to start because of the following error:
A device attached to the system is not functioning.
Event 7001, Service Control Manager:
The Server for NFS service depends on the Server for NFS Driver service which failed to start because of the following error:
The dependency service or group failed to start.
Based on a technet forum I have already checked and made sure there is no other service running on port 111 (command used is netstat -a -b -o).
Dependent Service Status:
During the installation process “Client for NFS” seems to have gone well and the service started successfully. But the “Server for NFS” failed, when checked for the status of the dependent process “portmap” service failed to start with the WIN32_EXIT_CODE
“31 (0x1f)”. Please find below the query result.
C:\Users\CMMAdmin>sc query rpcxdr
SERVICE_NAME: rpcxdr
 TYPE : 1 KERNEL_DRIVER
 STATE : 4 RUNNING
 (STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)
 WIN32_EXIT_CODE : 0 (0x0)
 SERVICE_EXIT_CODE : 0 (0x0)
 CHECKPOINT : 0x0
 WAIT_HINT : 0x0
C:\Users\CMMAdmin>sc query msnfsflt
SERVICE_NAME: msnfsflt
 TYPE : 2 FILE_SYSTEM_DRIVER
 STATE : 4 RUNNING
 (STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)
 WIN32_EXIT_CODE : 0 (0x0)
 SERVICE_EXIT_CODE : 0 (0x0)
 CHECKPOINT : 0x0
 WAIT_HINT : 0x0
C:\Users\CMMAdmin>sc query portmap
SERVICE_NAME: portmap
 TYPE : 1 KERNEL_DRIVER
 STATE : 1 STOPPED
 WIN32_EXIT_CODE : 31 (0x1f)
 SERVICE_EXIT_CODE : 0 (0x0)
 CHECKPOINT : 0x0
 WAIT_HINT : 0x0
C:\Users\CMMAdmin>
As the EXIT CODE is 31 ( A device attached to the system is not functioning), I have checked device manager and made sure there is no yellow warning shown against any hardware device. Further I am not sure how to proceed and debug this issue.
Please let me know if you have any suggestion on how debug this issue further.
Thanks
-Poopesh

Hey,
I had this same problem running MS Server 2008 R2 and server log is as follow:
name : Services for Network File System
state : Changed
rank : 2
sync tech: CBS
ant. : empty
pred. : File Services
provider : FileServerRoleProvider
5676: 2014-01-14 14:08:57.474 [Sync] Calling sync provider of Services for Network File System ...
5676: 2014-01-14 14:08:57.521 [FileServer] Sync:: guest: 'Services for Network File System', guest deleted?: False
5676: 2014-01-14 14:08:57.536 [FileServer] Begin installation of 'Services for Network File System'...
5676: 2014-01-14 14:08:57.536 [FileServer] Install: Guest: 'Services for Network File System', updateElement: 'ServicesForNFS-ServerAndClient;ClientForNFS-Infrastructure;NFS-Administration;ServerForNFS-Infrastructure'
5676: 2014-01-14 14:08:57.536 [FileServer] Installation queued for 'Services for Network File System'.
5676: 2014-01-14 14:08:57.536 [CBS] installing 'ServicesForNFS-ServerAndClient ClientForNFS-Infrastructure NFS-Administration
ServerForNFS-Infrastructure ' ...
5676: 2014-01-14 14:09:00.173 [CBS] ...parents that will be auto-installed: '<none>'
5676: 2014-01-14 14:09:00.173 [CBS] ...default children to turn-off: '<none>'
5676: 2014-01-14 14:09:00.204 [CBS] ...current state of 'ServicesForNFS-ServerAndClient': p: Staged, a: Staged, s: UninstallRequested
5676: 2014-01-14 14:09:00.204 [CBS] ...setting state of 'ServicesForNFS-ServerAndClient' to 'InstallRequested'
5676: 2014-01-14 14:09:00.235 [CBS] ...current state of 'ClientForNFS-Infrastructure': p: Staged, a: Staged, s: UninstallRequested
5676: 2014-01-14 14:09:00.235 [CBS] ...setting state of 'ClientForNFS-Infrastructure' to 'InstallRequested'
5676: 2014-01-14 14:09:00.266 [CBS] ...current state of 'NFS-Administration': p: Staged, a: Staged, s: UninstallRequested
5676: 2014-01-14 14:09:00.266 [CBS] ...setting state of 'NFS-Administration' to 'InstallRequested'
5676: 2014-01-14 14:09:00.282 [CBS] ...current state of 'ServerForNFS-Infrastructure': p: Staged, a: Staged, s: UninstallRequested
5676: 2014-01-14 14:09:00.282 [CBS] ...setting state of 'ServerForNFS-Infrastructure' to 'InstallRequested'
5676: 2014-01-14 14:09:00.313 [CBS] ...'ServicesForNFS-ServerAndClient' : applicability: Applicable
5676: 2014-01-14 14:09:00.360 [CBS] ...'ClientForNFS-Infrastructure' : applicability: Applicable
5676: 2014-01-14 14:09:00.422 [CBS] ...'NFS-Administration' : applicability: Applicable
5676: 2014-01-14 14:09:00.469 [CBS] ...'ServerForNFS-Infrastructure' : applicability: Applicable
5676: 2014-01-14 14:09:01.624 [CbsUIHandler] Initiate:
5676: 2014-01-14 14:09:01.624 [InstallationProgressPage] Installing...
5676: 2014-01-14 14:09:35.117 [CbsUIHandler] Error: -2147021879 :
5676: 2014-01-14 14:09:35.117 [CbsUIHandler] Terminate:
5676: 2014-01-14 14:09:41.170 [InstallationProgressPage] Verifying installation...
5676: 2014-01-14 14:09:41.264 [CBS] ...done installing 'ServicesForNFS-ServerAndClient ClientForNFS-Infrastructure NFS-Administration
ServerForNFS-Infrastructure '. Status: -2147021879 (80070bc9)
5676: 2014-01-14 14:09:41.279 [FileServer] Skipped configuration of 'Services for Network File System' because install operation failed.
5676: 2014-01-14 14:09:41.279 [Provider]
[STAT] ---- CBS Session Consolidation -----
[STAT] For
 'Services for Network File System'[STAT] installation(s) took '43.7368586' second(s) total.
[STAT] Configuration(s) took '0.0062843' second(s) total.
[STAT] Total time: '43.7431429' second(s).
5676: 2014-01-14 14:09:41.279 [Provider] Error (Id=0) Sync Result - Success: False, RebootRequired: True, Id: 105
5676: 2014-01-14 14:09:41.279 [Provider] Error (Id=0) Sync Message - OperationKind: Install, MessageType: Error, MessageCode: -2147021879, Message: <null>, AdditionalMessage: The requested operation failed. A system reboot is required to roll back changes
made
5676: 2014-01-14 14:09:41.279 [InstallationProgressPage] Sync operation completed
5676: 2014-01-14 14:09:41.279 [InstallationProgressPage] Performing post install/uninstall discovery...
5676: 2014-01-14 14:09:41.295 [Provider] C:\windows\system32\ServerManager\Cache\CbsUpdateState.bin does not exist.
5676: 2014-01-14 14:09:41.295 [CBS] IsCacheStillGood: False.
5676: 2014-01-14 14:09:43.900 [CBS] >>>GetUpdateInfo--------------------------------------------------
5676: 2014-01-14 14:09:57.394 [CBS] Error (Id=0) Function: 'ReadUpdateInfo()->Update_GetInstallState' failed: 80070bc9 (-2147021879)
5676: 2014-01-14 14:09:57.410 [CBS] <<<GetUpdateInfo--------------------------------------------------
5676: 2014-01-14 14:09:57.488 [DISCOVERY] hr: -2147021879 -> reboot required.
5676: 2014-01-14 14:09:57.613 [InstallationProgressPage] About to load finish page...
5676: 2014-01-14 14:09:57.628 [InstallationFinishPage] Loading finish page
5676: 2014-01-14 14:09:57.644 [InstallationFinishPage] Finish page loaded
My solution was to run netstat -ano to identify what process was running on port TCP/UDP :111, then with the command tasklist I got PID matching with the task name. Once identified I stopped the process, rebooted and installed
the NFS service. On top of that, before installing NFS services I disabled firewall and antivirus. It worked fine for me. I hope this will be usefull for you. By the way, don't forget to enable all process back!
Have a good one!

LabVIEW 2011 Development System fails to install

I have just tried several times to install my new copy of LabVIEW 2011 Dev Suite, but get an unknown exception (with no details - see attached picture) right at the start of installing the development system (English 32-bit). I have rebooted and closed all applications including virus scanning but still the same. I am using WinXP Pro SP3, and already have LV 8.6, 2009, and 2010 installed. I'm completely baffled as this type of problem has never occurred before and there is no information about the cause of the exception.
Mike
Solved!
Go to Solution.
Attachments:
LV2011 Unknown Exception.JPG ‏10 KB

Hi John,
After clicking on Details, the words "No information" or similar are displayed. I have tried again today but with the same result. I have attached a new screenshot showing the installer initialisation progress window. I have checked the DVD and it looks undamaged, and there is plenty of free disk space.
Attachments:
LV2011 Unknown Exception.JPG ‏64 KB

HP C4380 software fails to install on Win 7 64 bit

My HP C4380 printer scanner stopped working, so I added another printer with working scanner to my wireless network, but then I could not get my HP C4380 to run even though it was default, so I uninstalled the other printer because I prefer my HP. After uninstalling the other printer, I could not run my HP at all. I received the message it wasn't connected. I tried to hardwire it. No luck. Then, I followed scan and print doctor which told me to uninstall and reinstall software. I uninstalled and then used my HP cd to reinstall and got message it did not meet system requirements (Win 7 64 bit). I went online and tried to reinstall the C4380 software. The software appears to be installed but my printer shows up as an "unspecified" rectangular box under devices instead of a printer under "printers." So now I have no printer. How do I correct this problem?? Thank you.
This question was solved.
View Solution.

Hi EvelynMae,
Welcome to the HP Forums! I see that, your HP Photosmart c4380 software is failing to install on Windows 7. I am
happy to help you with this issue! I have a couple of questions for you:
Can you make copies with the printer?
Is the power cable plugged directly into the wall, or a surge protector? Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
In the meantime, I would try uninstalling the software, and then re-installing again, using the HP Printer Install Wizard for Windows.
Hope to hear from you, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

X64 Oracle 11g R2 Install On i7 3770 Windows 7 x64 Enterprise System Fails

x64 Oracle 11gR2 installation on my new Windows 7 x64 Enterprise system fails after the "Desktop/Server Class" screen. I click Next, and then nothing happens. The install app closes and no installation logs are available. I checked the Windows logs and there is nothing obvious.
My new system has an Intel i7 3770 cpu with 32GB of ram. My old system had twin Intel Xeon EM64T cpus with 3GB of ram. Both systems ran Windows 7 x64 Enterprise. x64 Oracle 11gR2 installed and ran fine on the old system, but the old system started making "funny" noises and had to be replaced.
This is my personal system, not a commercial installation. I got Win 7 x64 Enterprise from my community college, which is a Microsoft Partner. I need Oracle for my relational database classes.
The story so far:
1. I downloaded win64_11gR2_database_1of2 and win64_11gR2_database_2of2 and unpacked both of them into a folder named win64_11gR2_database_install, replacing as necessary.
2. I set up a loopback adapter and added the following entry to c:\Windows\System32\drivers\etc\hosts:
10.10.10.10 localhost PaulK-PC # Loopback Adapter for Oracle 11gR2 Install
3. After creating the loopback adapter, I restarted my PC. I can ping the adapter with no problems.
4. I ran c:\Users\PaulK\Downloads\Oracle\win64_11gR2_database_install\database\setup.exe as Administrator.
5. I skipped email notification, since I don't have a support agreement.
6. I select "Create and configure a database".
7. Whether I select Desktop Class or Server Class, when I click Next, the installation app dies.
Page 2-2 of Oracle Database Installation Guide 11g Release 2 (11.2) for Windows E24186-01 states that an x64 installation of Oracle requires an AMD64 or EM64T cpu. Does this mean I need to install the x86 version of Oracle 11gR2, or is there some other problem?
Suggestions?
Thanks.

And Part II:
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : localhost
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: localhost
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: E:\app\PaulK\product\11.2.0\dbhome_1, and user: SYS
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.DatabaseChecks updateAccountStatus
CONFIG: SYSMAN password modified
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.DatabaseChecks updateAccountStatus
CONFIG: Unlocked SYSMAN account
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : localhost
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: localhost
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: E:\app\PaulK\product\11.2.0\dbhome_1, and user: SYSMAN
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : localhost
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: localhost
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: E:\app\PaulK\product\11.2.0\dbhome_1, and user: SYS
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.EMDBPreConfig invoke
CONFIG: Passed repository configuration check
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter GLOBAL_DB_UNIQUE_NAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.DatabaseChecks getGlobalDbUniqueName
CONFIG: No Global database unique name available. Will try to retrieve it from DB itself
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : localhost
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: localhost
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: E:\app\PaulK\product\11.2.0\dbhome_1, and user: SYS
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_DOMAIN.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.DatabaseChecks getDbDomain
CONFIG: No db domain available. Will query db for db_domain parameter
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: GLOBAL_DB_UNIQUE_NAME value: orcl
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emd.properties to E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emd.properties.emca.tmp
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emd.properties has been copied to E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emd.properties.emca.tmp
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emoms.properties to E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emoms.properties.emca.tmp
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emoms.properties has been copied to E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emoms.properties.emca.tmp
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file E:\app\PaulK\product\11.2.0\dbhome_1\sysman\emd\targets.xml to E:\app\PaulK\product\11.2.0\dbhome_1\sysman\emd\targets.xml.emca.tmp
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file E:\app\PaulK\product\11.2.0\dbhome_1\sysman\emd\targets.xml has been copied to E:\app\PaulK\product\11.2.0\dbhome_1\sysman\emd\targets.xml.emca.tmp
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.ClusterUtil isHASInstalled
CONFIG: isHAInstalled: false
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.ClusterUtil isCRSInstalled
CONFIG: isCRSInstalled: false
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: Cluster.isCluster: false. Skip call to getLocalNode
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_CENTRAL_AGENT_RECONFIG' set to false
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.CentralAgentUtil isCentralAgentConfigured
CONFIG: Sid: orcl Host: localhost Node: null OH: E:\app\PaulK\product\11.2.0\dbhome_1 agentHome: null isCentral: false
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: orcl Host: localhost Node: null OH: E:\app\PaulK\product\11.2.0\dbhome_1 isDBC: false
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_CENTRAL_AGENT_CONFIGURED' set to false
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_DBCONTROL_CONFIGURED' set to false
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: orcl Host: localhost Node: null OH: E:\app\PaulK\product\11.2.0\dbhome_1 isDBC: false
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter PORTS_FILE.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT_localhost.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT_localhost.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_localhost.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT_localhost.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to E:\app\PaulK\product\11.2.0\dbhome_1\oui
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Homes to scan for used ports: [E:\app\PaulK\product\11.2.0\dbhome_1]
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Searching all DBConsole instances for used ports under ORACLE_HOME E:\app\PaulK\product\11.2.0\dbhome_1
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking JMS port: null from E:\app\PaulK\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking RMI port: null from E:\app\PaulK\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking HTTP port: null from E:\app\PaulK\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager getAgentPort
CONFIG: Cannot parse EMD_URL correctly. No port identified
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking Agent port: null from E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emd.properties
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Cannnot parse EMD_URL correctly. No port identified
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.FileUtil getProperties
CONFIG: Error reading file E:\app\PaulK\product\11.2.0\dbhome_1\install\staticports.ini
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager getFreePorts
CONFIG: E:\app\PaulK\product\11.2.0\dbhome_1:localhost:null:orcl:{}:null:{DBCONTROL_HTTP_PORT=1158, RMI_PORT=5520, JMS_PORT=5540, AGENT_PORT=3938}
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT_localhost.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: AGENT_PORT_localhost value: 3938
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_localhost.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DBCONTROL_HTTP_PORT_localhost value: 1158
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT_localhost.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: JMS_PORT_localhost value: 5540
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT_localhost.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: RMI_PORT_localhost value: 5520
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.EMDBPreConfig getFreePorts
CONFIG: Ports assigned for Node: localhost : {DBCONTROL_HTTP_PORT=1158, RMI_PORT=5520, JMS_PORT=5540, AGENT_PORT=3938}
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.EMDBPreConfig copyAgentTimeStampFile
CONFIG: File: E:\app\PaulK\product\11.2.0\dbhome_1\localhost_orcl\sysman\emd\agntstmp.txt:localhost does not exists.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : localhost
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: localhost
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: E:\app\PaulK\product\11.2.0\dbhome_1, and user: SYS
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.EMReposConfig unlockAccounts
CONFIG: Unlocking dbsnmp and sysman
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.EMReposConfig invoke
CONFIG: Successfully unlocked relevant accounts
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : localhost
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: localhost
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: E:\app\PaulK\product\11.2.0\dbhome_1, and user: SYS
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.EMReposConfig createOutOfBoxJobs
CONFIG: Finished executing emreposoutofbox.sql
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : localhost
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: localhost
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: E:\app\PaulK\product\11.2.0\dbhome_1, and user: SYSMAN
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.EMReposConfig createOutOfBoxJobs
CONFIG: Submitting dbms job: E:\app\PaulK\product\11.2.0\dbhome_1\sysman\admin\emdrep\sql\core\latest\admin\admin_submit_dbms_jobs.sql
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.EMReposConfig createOutOfBoxJobs
CONFIG: Successfully submitted dbms job
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.ParamsManager checkListenerStatusForDBControl
CONFIG: connectDesc : (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=orcl)))
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : localhost
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: localhost
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: E:\app\PaulK\product\11.2.0\dbhome_1, and user: SYSMAN
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.ParamsManager checkListenerStatusForDBControl
CONFIG: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
     at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1655)
     at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeSql(SQLEngine.java:1903)
     at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:3230)
     at oracle.sysman.emcp.EMReposConfig.unlockMGMTAccount(EMReposConfig.java:1001)
     at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:346)
     at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:158)
     at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)
     at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:583)
     at oracle.sysman.assistants.dbca.backend.PostDBCreationStep.executeImpl(PostDBCreationStep.java:968)
     at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
     at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
     at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2667)
     at java.lang.Thread.run(Thread.java:595)
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM Configuration Assistant again .
Refer to the log file at E:\app\PaulK\cfgtoollogs\dbca\orcl\emConfig.log for more details.
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM Configuration Assistant again .
     at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:3245)
     at oracle.sysman.emcp.EMReposConfig.unlockMGMTAccount(EMReposConfig.java:1001)
     at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:346)
     at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:158)
     at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)
     at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:583)
     at oracle.sysman.assistants.dbca.backend.PostDBCreationStep.executeImpl(PostDBCreationStep.java:968)
     at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
     at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
     at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2667)
     at java.lang.Thread.run(Thread.java:595)
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.EMConfig restoreOuiLoc
CONFIG: Restoring oracle.installer.oui_loc to E:\app\PaulK\product\11.2.0\dbhome_1\oui

ITunes fails to install automatically on Win 7 64-bit computer

iTune always fails to install automatically, and advises me to select to only download the updates, and then to install them manually. Well, there are five files that download: 1) AppleMobileDeviceSupport64.msi, 2)iTunes64.msi, 3)QuickTime.msi, 4) QuickTimeInstallerAdmin.exe, and 5)SetupAdmin.exe.
There are no further instructions as to which to install or in what sequence. So, I selected the iTunes64.msi, and after several "...verify that you have access to that directory" dialogue boxes, it installed -- (I do have version 10 now). But my iTunes doesn't say whether it is the 64-bit or 32-bit version that has been installed. How can I determine if I have installed the 64- or 32- bit version? And what do I do with the other files that were downloaded? Help, please!
I would truly 'perciate any advise!

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall press on)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Pr 6 of CS6 failed to install due to language error. System: Mac OS 10.9.4. Any idea?

Pr 6 of CS6 failed to install due to language error. System: Mac OS 10.9.4. Any idea?

attach a screenshot of the error message.

MS Office 365 fails to install in default on Win 8.1 new laptop S75-A7221

Hello,
New license MS Office 365 fails to install in default on Win 8.1 new laptop S75-A7221.
I downloaded software from Microsoft MS Office 365 site.
What is the contact for helpdesk in India for quick resolution?
Thanks,
Miroslaw

Run Microsoft FixIt in the following link to check the result.
http://support.microsoft.com/kb/2822317
If your Office installation problem continues to occur, try to perform the steps provided by the same link for general troubleshooting.
Tony Chen
TechNet Community Support

"Non-system disk Press any key to reboot"- Trying to install Win 7 on Mac Mini

Hello. I'm trying to install Windows 7 on a new-model Mac Mini ('Late 2012'), which I just bought from Apple. [Specs: 1 TB Fusion drive, 2.6 GHz intel Core i7, 16 GB RAM, OS X Mavericks (latest), Graphics: Intel HD graphics 4000, Screen: LG Flatron 24"].
After following instructions on Bootcamp, I tried installing it through my external USB Apple Superdrive (DVD), but for some reason as soon as the system finishes getting things ready and reboots to begin installing Windows 7, I get a black screen with an error message as follows: "No bootable device -- insert boot disk and press any key". Pressing the keys on my keyboard does nothing (even though it's a wired model, not a wireless one.) I'm forced to do a hard shutdown using the power button and hold down the Option key in order to get the system to show the Mac HD where OS X is. It also shows the Windows DVD as another option, but when I select it and the system boots, I just get the same error message again. So I go back to a hard shutdown and reboot to go into OS X again.
Not sure what to do, I did some online research and in one post in the Frequently Asked Questions for Bootcamp, it says for installing Win 7 and Win 8, the computer won't work with external USB drives (*totally nuts in my opinion - Apple has to fix this stuff if they want to entice Windows users into buying their sleek, quiet hardware). Instead, the post recommends creating a Windows 7 ISO file from my Windows 7 DVD and putting it on a USB thumbdrive that Bootcamp is going to use to put all the Apple/Windows drivers on for the installation process. I'm also told I have to unplug my Superdrive (no explanation given for why). So I do all this and get Bootcamp Assistant running again. Unfortunately, as soon as the system reboots after going through all the usual preparation steps, I get another black screen with a new error message: "Non-system disk Press any key to reboot". So I'm at a loss for what to do next.
(I've also have an iMac that I bought more than a year ago that I also put Windows 7 on, with no problems that time. Go figure.)
If anyone here has an good answer for how to proceed, I need to know. Thanks in advance!

Here they are:
cygnus-x1:~ LantS$ diskutil list
/dev/disk0
 #: TYPE NAME SIZE IDENTIFIER
 0: GUID_partition_scheme *121.3 GB disk0
 1: EFI EFI 209.7 MB disk0s1
 2: Apple_CoreStorage 121.0 GB disk0s2
 3: Apple_Boot Boot OS X 134.2 MB disk0s3
/dev/disk1
 #: TYPE NAME SIZE IDENTIFIER
 0: GUID_partition_scheme *1.0 TB disk1
 1: EFI EFI 209.7 MB disk1s1
 2: Apple_CoreStorage 443.3 GB disk1s2
 3: Apple_Boot Recovery HD 650.0 MB disk1s3
 4: Microsoft Basic Data BOOTCAMP 556.0 GB disk1s4
/dev/disk2
 #: TYPE NAME SIZE IDENTIFIER
 0: Apple_HFS Freedom (Mac HD 1 TB) *555.8 GB disk2
/dev/disk3
 #: TYPE NAME SIZE IDENTIFIER
 0: FDisk_partition_scheme *16.0 GB disk3
 1: DOS_FAT_32 WININSTALL 16.0 GB disk3s1
cygnus-x1:~ LantS$ diskutil cs list
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group DB9C188B-5B09-43DE-BA9A-1CBB53ED19C4
 =========================================================
 Name: Macintosh HD
 Status: Online
 Size: 564333961216 B (564.3 GB)
 Free Space: 49152 B (49.2 KB)
 |
 +-< Physical Volume 415AE4A2-2CDB-4C8B-AE00-7A14014B3EA0
 | ----------------------------------------------------
 | Index: 0
 | Disk: disk0s2
 | Status: Online
 | Size: 120988852224 B (121.0 GB)
 |
 +-< Physical Volume 829492A1-0BC2-4358-A778-C008C03D00F7
 | ----------------------------------------------------
 | Index: 1
 | Disk: disk1s2
 | Status: Online
 | Size: 443345108992 B (443.3 GB)
 |
 +-> Logical Volume Family C37DA9C0-00E7-46A4-90EC-548204BFB908
 Encryption Status: Unlocked
 Encryption Type: None
 Conversion Status: NoConversion
 Conversion Direction: -none-
 Has Encrypted Extents: No
 Fully Secure: No
 Passphrase Required: No
 |
 +-> Logical Volume B769E601-F56F-4F83-A5B5-4378159FF8B9
 Disk: disk2
 Status: Online
 Size (Total): 555826479104 B (555.8 GB)
 Conversion Progress: -none-
 Revertible: No
 LV Name: Freedom (Mac HD 1 TB)
 Volume Name: Freedom (Mac HD 1 TB)
 Content Hint: Apple_HFS
cygnus-x1:~ LantS$

Installing win XP on external esata drive failed

Hello,
I have a problem with a lenovo T520. I installed win XP sp3 on its internal harddrive and it working fine. I have an external harddrive that I connect to the laptop via the eSata port. I want now to install additional win XP sp3 on the external drive to get a multiboot system.
But while setup, and after the first booting screen of windows, a blue screen of death appears with c0000218 unknown hardware error message.
I examined a little bit, and I saw that while win XP is booting it switch off the external harddrive (or reset the eSata port), and I think that what create the problem,
So is there a way to solve this problem.
Thanks for any help!

I'm not sure if you can get it to boot normally out of the eSATA port. With XP on USB installs, you have to get it to load the USBSTOR driver early in boot.
You'd probably get better luck on the MSFN XP subforum with this question.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

How to install Linux on UEFI systems where GRUB fail to install?

A few of us are asking:
How to install Linux on UEFI systems where GRUB fail to install? Because after installing Linux, my MBR is messed up, and I get a "no operating system found" at system startup.
abvasili
I'm just a volunteer. I like to help others where I can. Do my ideas work? I hope so. o_O
Who helped you today? Do not forget to thank him.
My hardware: TP x120e 0596-2ru. Windows 7, sp1, 64Bit, English, installed in UEFI mode.
Solved!
Go to Solution.

Hi again,
I would like to answer to another question, just in case:
Question: Can I dual boot Win7 and Linux on a UEFI capable bios?
Answer: Yes you can. If your HDD is formatted in MBR partition table (or msdos) than you can install first windows 7 and than the distro of your choice. BUT, careful, if you install windows from a DVD media it will convert your HDD in GPT partition table and dual boot will be almost impossible... (or will give you a lot of headache) to avoid this, dump the win7 iso to an usb using Windows 7 USB/DVD Download Tool. Installing from USB will not change the hdd in GPT partition table.
take care
abvasili
I'm just a volunteer. I like to help others where I can. Do my ideas work? I hope so. o_O
Who helped you today? Do not forget to thank him.
My hardware: TP x120e 0596-2ru. Windows 7, sp1, 64Bit, English, installed in UEFI mode.

Shared Technologies have failed to install Photoshop Elements 12 on my Win 7

Shared Technologies have failed to install Photoshop Elements 12 on my Win 7

Hi,
Could you please share the logs from the location(s) mentioned below:
%temp%\PREInstall.log, PRE11.log,
PDApp.log,
amt.log,
C:\Program Files\Common Files\Adobe\Installers\<*PRE11*>.log.gz
I'd be able to comment & suggest better once I have the logs but meanwhile, you might like to upgrade the Adobe Application Manager from the following location just to rule out any incompatibilities or upgrade failures of AAM:
Win: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774
Thanks.

System fails to install win 7pro

Similar Messages

Maybe you are looking for