System failure after critical updates auto downloaded on HP-DV7 17.3" AMD Quad Core

After critical updates system auto reboot closed programs and went into reboot mode but system will not reboot and cannot run recovery successfully. Windows tries to load files and get to the start windows screen but will not complete. Not sure if it will bring me back to orig. format, was not able to find a restore point and do not have any reboot disks. Still under warranty but no list of available service people in area. Easy to buy hard to get service! UGH! HELP PLEASE. Thanks

Hi:
Make your own windows 7 repair/reinstallation disk and use the repair option to see if you can get it fixed.
Use the repair with command prompt method and try the fixboot command.
http://support.microsoft.com/kb/927392
Here's how to make a W7 installation/repair disk.
I just copy and paste my standard instructions for using this disk to reinstall windows.
You don't need to enter the product key to repair windows, only to use this disk as a last resort to reinstall windows.
If you can read the 25 character Microsoft windows 7 product key, you can download plain Windows 7 ISO files to burn to a DVD for the version of windows that came installed on your PC, and that is listed on the Microsoft COA sticker on your PC's case.
Burn the ISO using the Burn ISO option on your DVD burning program and burn at the slowest possible speed your program will allow. This will create a bootable DVD.
Or use the Windows 7 USB/DVD installation tool to compile the ISO file you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB method of compilation.
http://www.microsoftstore.com/store/msstore/html/pbPage.Help_Win7_usbdvd_dwnTool
Use the 25 character product key on the PC to activate the installation.
The key will activate either a 32 or 64 bit installation.
Then go to the PC's support and driver page to install the drivers you need.
Link to the W7 ISO file downloads is below.
http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/
Paul

Similar Messages

System failure after recent update.

Hello. I just ran pacman -Syu on one of my systems and now the console screen resolution is down to low (default linux not what Arch is normally set to) and the network won't come up.
journalctl -xe gives the error of
Job sys-subsystem-net-devices-enp0s4fu4.device/start failed with result 'timeout' <- an USB network card
Job sys-subsystem-net-devices-enp5s0.device/start timed out <- Internal eth0 card.
~ # pacman -Syu
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
:: Starting full system upgrade...
resolving dependencies...
looking for conflicting packages...
Packages (20) curl-7.41.0-1 e2fsprogs-1.42.12-2 gnupg-2.1.2-2 iproute2-3.19.0-1 kmod-20-1 libtasn1-4.3-1 libutil-linux-2.26.1-3 linux-3.19.2-1 logrotate-3.8.9-1 lua-5.2.4-1
openssh-6.8p1-2 openssl-1.0.2.a-1 pacman-mirrorlist-20150315-1 patch-2.7.5-1 shadow-4.2.1-3 tcpdump-4.7.3-1 unzip-6.0-10 util-linux-2.26.1-3 vim-minimal-7.4.663-1
vim-runtime-7.4.663-1
Total Download Size: 72.29 MiB
Total Installed Size: 141.58 MiB
Net Upgrade Size: 1.86 MiB
:: Proceed with installation? [Y/n]
:: Retrieving packages ...
openssl-1.0.2.a-1-x86_64 2.6 MiB 1292K/s 00:02 [#####################################################################] 100%
libutil-linux-2.26.1-3-x86_64 295.2 KiB 523K/s 00:01 [#####################################################################] 100%
e2fsprogs-1.42.12-2-x86_64 757.1 KiB 2.38M/s 00:00 [#####################################################################] 100%
libtasn1-4.3-1-x86_64 104.8 KiB 6.02M/s 00:00 [#####################################################################] 100%
curl-7.41.0-1-x86_64 721.3 KiB 4.49M/s 00:00 [#####################################################################] 100%
gnupg-2.1.2-2-x86_64 1840.7 KiB 4.14M/s 00:00 [#####################################################################] 100%
iproute2-3.19.0-1-x86_64 510.1 KiB 4.66M/s 00:00 [#####################################################################] 100%
kmod-20-1-x86_64 108.4 KiB 5.29M/s 00:00 [#####################################################################] 100%
shadow-4.2.1-3-x86_64 1071.6 KiB 4.55M/s 00:00 [#####################################################################] 100%
util-linux-2.26.1-3-x86_64 1631.3 KiB 4.77M/s 00:00 [#####################################################################] 100%
linux-3.19.2-1-x86_64 55.5 MiB 4.73M/s 00:12 [#####################################################################] 100%
logrotate-3.8.9-1-x86_64 33.7 KiB 5.48M/s 00:00 [#####################################################################] 100%
openssh-6.8p1-2-x86_64 703.9 KiB 4.91M/s 00:00 [#####################################################################] 100%
pacman-mirrorlist-20150315-1-any 3.3 KiB 0.00B/s 00:00 [#####################################################################] 100%
patch-2.7.5-1-x86_64 79.2 KiB 4.55M/s 00:00 [#####################################################################] 100%
lua-5.2.4-1-x86_64 197.8 KiB 560K/s 00:00 [#####################################################################] 100%
tcpdump-4.7.3-1-x86_64 317.4 KiB 1644K/s 00:00 [#####################################################################] 100%
unzip-6.0-10-x86_64 125.2 KiB 5.32M/s 00:00 [#####################################################################] 100%
vim-runtime-7.4.663-1-x86_64 4.8 MiB 5.00M/s 00:01 [#####################################################################] 100%
vim-minimal-7.4.663-1-x86_64 1078.4 KiB 5.01M/s 00:00 [#####################################################################] 100%
(20/20) checking keys in keyring [#####################################################################] 100%
(20/20) checking package integrity [#####################################################################] 100%
(20/20) loading package files [#####################################################################] 100%
(20/20) checking for file conflicts [#####################################################################] 100%
(20/20) checking available disk space [#####################################################################] 100%
( 1/20) upgrading openssl [#####################################################################] 100%
( 2/20) upgrading libutil-linux [#####################################################################] 100%
( 3/20) upgrading e2fsprogs [#####################################################################] 100%
( 4/20) upgrading libtasn1 [#####################################################################] 100%
( 5/20) upgrading curl [#####################################################################] 100%
( 6/20) upgrading gnupg [#####################################################################] 100%
( 7/20) upgrading iproute2 [#####################################################################] 100%
( 8/20) upgrading kmod [#####################################################################] 100%
( 9/20) upgrading shadow [#####################################################################] 100%
==> Warning: /etc/group or /etc/gshadow are inconsistent.
Run 'grpck' to correct this.
(10/20) upgrading util-linux [#####################################################################] 100%
(11/20) upgrading linux [#####################################################################] 100%
>>> Updating module dependencies. Please wait ...
>>> Generating initial ramdisk, using mkinitcpio. Please wait...
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 3.19.2-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [modconf]
-> Running build hook: [block]
-> Running build hook: [encrypt]
-> Running build hook: [lvm2]
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip-compressed initcpio image: /boot/initramfs-linux.img
==> Image generation successful
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 3.19.2-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: aic94xx
==> WARNING: Possibly missing firmware for module: wd719x
-> Running build hook: [encrypt]
-> Running build hook: [lvm2]
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip-compressed initcpio image: /boot/initramfs-linux-fallback.img
==> Image generation successful
(12/20) upgrading logrotate [#####################################################################] 100%
(13/20) upgrading lua [#####################################################################] 100%
(14/20) upgrading openssh [#####################################################################] 100%
warning: /etc/ssh/sshd_config installed as /etc/ssh/sshd_config.pacnew
(15/20) upgrading pacman-mirrorlist [#####################################################################] 100%
warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
(16/20) upgrading patch [#####################################################################] 100%
(17/20) upgrading tcpdump [#####################################################################] 100%
(18/20) upgrading unzip [#####################################################################] 100%
(19/20) upgrading vim-runtime [#####################################################################] 100%
(20/20) upgrading vim-minimal [#####################################################################] 100%
~ # reboot

Fairly I didn't set up anything in the tty, it's the same setting Arch boots from CD so I always thought it just takes it from default settings.
BTW I just found, that the pacman cache has two versions of the Linux kernel 3.18 and 3.19 but only one version of linux-api-headers which is the same sub as that of the working kernel: 3.18.
Could this cause the problem that there is no 3.19 kernel headers or are they not simultaneously updated with the kernel?
As for the bugtrack link you gave, I don't know if it's related. In the comments they say its possible to load the module but then after a short connection time it went down, however in my case it does not get loaded at all as I see in journalctl -b
Last edited by piwwo (2015-03-25 14:26:20)

Internal camera failure after software updates...first skype couldn't......

Hello!
I am having internal camera failure after software updates...first skype couldn't find the camera, and now photo booth also says camera is not connected. Its a brand new MacBook Pro which has been working fine for a month, but after a software update (the blinking message said i had 13 new things to update...you know what I'm talking about right?) all of a sudden Skype couldnt find a camera, so i went to the skype community and tried some things (like trashing skype) but now photo booth says no camera detected, which is weird cause the camera is built into the computer..
Please help!
Thanks
O

First, reset the SMC:
http://support.apple.com/kb/HT3964
If that doesn't help, then take it to an Apple Store for examination.

Hp Pvillion G6 2005ax with AMD Quad Core is showing blank Screen after latest BIOS Update

Hi
I have strange issue after the Hp Software Update. Recently i have connected to High Speed internet and Hp Asistant shown a Bios update for my System and i chose download. after that my Hp Pvillion G6 2005ax with AMD Quad Core is showing blank Screen and Caps Lock button Blinks Randomly and F12 Button also on. Kindly Suggest a Solution for this. I have been irritated by Hp Customer Care support.
My Mobile No. [Personal Information Removed]
Email ID is [Personal Information Removed]
for any help you can send or i am availbale on above contact address.

Hello , Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel. I read your post about the BIOS, and wanted to assist you! The blank screen and blinking of your Caps Lock, is the system trying to give you the error code for the issue your notebook is having. You can review the following document for further assistance, if needed:HP Notebook PCs - Computer Does Not Start and Emits an LED or Beep Code Please note the blinking sequence of your Caps Lock, and follow the instructions in the document above. From the information that you provided, it is possible that the blink code will be related to a BIOS error. You can always try performing a System Restore, to set the notebook back to a previous working point. You can also try checking this site for BIOS drivers. Once there, you can select your Operating System and click "Update", you should be able to access and download the BIOS drivers. If you downloaded the latest driver from that site, try uninstalling the driver and installing the previous version. Please let me know if this information was helpful by clicking the thumbs up below.
Have a great weekend!

TouchSmart 520 Windows 7 Home premium Problems after critical updates

After my TouchSmart 520 auto ran critical updates on 13 Feb 2013,I cannot connect to Internet at all.It was still able to connect to my home wireless network.
I did a systerm recovery, to restore up to just before the critical updates on 13 Feb, then it's able to connect to internet. After that, it auto ran critical updates 2 times, and the same problem started.I have done the system recovery again and now turn off the downloading and installation of critical updates completely, but this should not be long term solution.
Has anyone encounter same problem or is able to help me on this? What else do I need to do?
Appreicate any help.TIA!

Hello sgcosimo,
You’re not able to connect to the internet after updates have run. I’ve had that happen before and usually Microsoft will send out an update that fixes the problem a few days later.
You can try to run the updates again to see if you still get the error.
If you’re still not able to get online, go into device manger and uninstall the Wi-Fi adapter and restart the computer.
Here is a link to uninstall the adapter.
Let me know if this helps.

Major drama's after critical update

I purchased Windows 8 disc in the first 3 months of it being released. When 8.1 became available on line, I installed it also. I had my backups set for monthly and everything was running ok, I say ok, because I have found that Windows 7 seems to be a lot
easier for browsers hence, the internet is faster when using 7. In December I woke up one morning to find my system was turned off, I usually leave it on. Windows 8.1 would not boot, however post was/is fine. I did the usual repair attempts and finally restored
to just before last update. Next critical update attempt (that day) my system crashed. This time I could not restore so i used my system image, which was, at that time, two weeks old. The message I got was that the system image was different architecture and
was invalid. In the end I re-installed. However, I soon found out that my Win 8 disc was an upgrade so i had to start at Win 7 Pro, install with updates, then win 8 with updates, then 8.1. Lesson learnt, I thought, backups weekly WITH sys image weekly.
Fast forward to Feb 2015, critical update and win 8.1 is crashed AGAIN! Same routine only this time I could not get the updates to install for 8. So I re-installed 8, three times! Before updates would install. Because...unless Windows 8 is up to date, it
will NOT let me install Windows 8.1!
Then, this week my OS RAID array (5 x 240GB SandDisk Extreme SSD in RAID 0) failed...install AGAIN! Understandable...errors happen, discs fail, although is unexpected for an SSD less than 8 months old (intermittent failure that I have not gone into yet).
It just made matters feel worse AFTER the first two crashes!
Microsoft advertises that Windows 8.1 AND 10 are/will be free upgrades for those who have purchased 8 however, this is NOT the case because if I have to re-install then I need a product key, my Windows 8 key will not suffice. Can anyone help with this? I
don't see why I should have to pay for an error caused by Microsoft. I run Trend Micro Titanium and Malwarebytes Premium. I try to be proactive with my passwords so i am not suffering from virus, malware etc...but I am VERY frustrated and am for the moment,
going back to Windows 7! If there are any more issues I am at the point of changing to Ubuntu, Apple or chrome OS.
I need help! Has anyone else found these issues? Can anyone suggest a course of action for me?
ASRock z87 Extreme9a/c / i7 4770K / 32GB DDR3 2400MHz RAM / 2 x GeForce GTX770 Ac 4GB RAM in SLI / OCZ ZX-1250W PSU
I know hardware will not be an issue here but I included anyway, to clarify.

Hi Bluismycat,
What is the main issue here ? How to upgrade to Windows 8.1 from Windows 8 ?
If we want to upgrade the windows 8.1 from windows 8,we can refer to the following link :
Update to Windows 8.1 from Windows 8
http://windows.microsoft.com/en-hk/windows-8/update-from-windows-8-tutorial
As for failuring to install the updates ,have you got any error messages ? We can try the following steps to have a check(Turn off the antivirus software temporarily ):
1.Run "dism /online /cleanup-image /restorehealth " to check the health of the system
2.Run the built-in troubleshoot tool to have a diagnostic:
Control Panel\All Control Panel Items\Troubleshooting\All Categories\Windows update
3.Clear the windows update cache.
Net stop wuauserv
cd %systemroot%
Ren SoftwareDistribution SoftwareDistribution.old
Net start wuauserv
4.Reset Windows update components
How do I reset Windows Update components?
http://support.microsoft.com/kb/971058
Considering the Windows 10 is still in testing ,it is not recommended to install it for working environment.If we want to enjoy this system in advance , we can refer to the following link :
A preview for PC experts
http://windows.microsoft.com/en-hk/windows/preview-faq
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

HP Pavilion Elite e9220f crashing repeatedly after critical update

HP Pavilion Elite e9220f, Windows 7 64-bit.
Crashed on 5/9/13, wouldn't reboot. Freezed with blinking cursor in upper left corner of blank screen after HP splash screen.
Changed HD from RAID to IDE mode in BIOS and Windows started but crashed with blue screen on trying to install the IDE controller driver automatically after start-up. Blue screen crash codes indicated the hard drive controller was the source.
System Restore lists several critical updates for Windows over the last few weeks. I ran System Restore in safe mode to 5/4/13 restore point, then rebooted to safe mode for confirmation of restore, and it then booted normally and successfully installed the IDE controller driver, but then crashed again as soon as subsequent critical updates were reinstalled. Disabling Windows Update via services.msc then restoring to 5/4/13 again finally stabilized the system, able to use normally without crashing.
To try to solve the underlying problem preventing further critical updates and allow me to turn on Windows Update again, I found the firmware update on HP's site for the hard drive, WDC WD10EADS-65M2B0, from version B0 to BX. However, after updating the firmware to BX, Windows now crashes upon starting even still at restore point 5/4/13 or even all the way back to 4/28/13, and now before it can even attempt to install the IDE controller. In otherwords, updating the firmware made it worse. The system is again unsable.
Anyone else having this problem?
JoEbYX

I agree that it is inexplicable, if that was indeed the case.
If the PC has a single drive, then it makes zero sense to use RAID mode. RAID is an acronym which stands for redundant array of inexpensive disks. The use of any form of RAID (0-5) requires a minimum of two physical hard disks.
AHCI and IDE are the only viable options with a single hard disk.
Did you make a backup or image of the hard disk?
What is the installed OS?
You will need to enable the SATA msAHCI driver in the operating system as this Microsoft document explains. Use the Microsoft Automated Fixit on the document to resolve the issue. It will take care of the registry change required. Afterwards you will need to enter the BIOS and verify the SATA mode is set to AHCI and if not, change it to AHCI before the next boot into Windows.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Internal HDD no longer detected after Critical Update Windows 8.1

After installing the critical update that was released on Jan 2015 for Windows 8.1, my internal backup HDD started acting up. First, issues arose when it took an usual amount of time to open any folder. However, after trying a few times I was able to see
thumbnails and was even able to load a .mov file. Concerned something was failing, I tried to copy a folder with .jpg and .mov to my primary HDD but froze. I rebooted to see if it would resolve the issue but now no thumbnails would display and upon clicking
a .jpg, I get an 'Invalid File' in red with black background on Picture Viewer. I did a system restore back to the date before the critical update and now my HDD is completely gone from my computer. I tried working with MS tech support where he controlled
my PC to 'repair system update' which was successful then tried to do 'sfc /scannow' in cmd prompt which detected corrupt files.
Any suggestions please?

Hi HarryVeeh,
Till now no compatible issue about update Jan 2015 and storage device in Windows 8.1 has been reported. And since you mentioned that there is system corrupt files, it might be caused by corruption in boot section area of hard drive.
Please reconnect your hard drive first and make sure it is visible in BIOS.
Open Disk Manager and check if you could see your 2nd hard drive, if it is visible try to assign a letter to it.
Right Click on the Drive > Change Drive Letter and Paths > Choose a letter.
Once this is done you'll be find your 2nd HDD when you open My Computer.
If you can't then you'll definitely need to format it.
Repair your system corruption by using DISM tools:
To use DISM, make sure you have connected to internet.
1. Press the Windows Key on your keyboard and X to open up the Power User Tasks Menu
2. Run Command Prompt as a administrator.
3. When command prompt opens, copy and paste the following commands into it, press enter
DISM.exe /Online /Cleanup-image /Restorehealth
Wait for this to finish before you continue (approximately 15-20 minutes)
For more information about DISM tool:
https://technet.microsoft.com/en-us/library/hh824869.aspx
Regards

After today's auto download, firefox will not start, at all, any way!

after today's auto upload, Firefox will not come up, at all, no matter what I try
== This happened ==
Every time Firefox opened
== auto update ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; DigExt; GTB6.5; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

Have you tried to start Firefox in [[Safe Mode]]?
What about [[Managing profiles]]?
Try to download the latest Firefox (3.6.4) from website. I hope your settings will not be lost; possibly, it was something with network connection, and Firefox updated only one half of itself; that's why I recommend to download it from website and install manually.

System Crashes After Bios Update

Hi all,
I got into a big problem after upgrading my system bios. I update all my drivers after windows install and with that i have also install the bios update after that when my laptop automatically restarts my laptop is not turning on it shows no display on and power button light keeps on caps locks buton light keeps blinking and with that wifi button light also keeps on. My notebook model is HP 2000-2116tu..Please Somebody Help me fast i will be very thankfulll..Please response fast..

Try this process to rollback to earlier version of BIOS.
1-Immediately after powering on hold/tap the Esc key.
2-When the menu appears, tap F2 for System Diagnostics.
3-In the list of items will be BIOS Management.Use the arrow key to move down & highlight it.Press Enter key.
4-You should now have a Rollback BIOS option.Use arrow key again to highlight and press Enter key.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

System crash after recent update

Hi all,
As of yesterday, my laptop has started crashing after a little while open (sometimes right away, sometimes ten minutes in, sometimes right after bios). I believed it was to do with the recent alsa-utils update and I downgraded that package which helped for a little bit. When it updated again and the core dump from the previous update disappeared, I upgraded and the problem starting happening again. Then I downgraded and no change.
So I think it is not to do with alsa anymore...but I can find no information at all in dmesg or journalctl. There seem to be no errors, warnings whatsoever. I have tried chrooting in and looking at all the logs but to no avail.
The update that broke my system installed the following:
alsa-lib alsa-utils gcc-libs gcc isl kmod libcdio-paranoia pyalpm namcap
I have since downgraded both isl and kmod and it looks my laptop is running okay so far. After this update I also updated the kernel, but running from the fallback initramfs did not change the issue so I don't think it was that either.
I have trawled the forums for recent problems with recent updates .ut did not find anything apart from the alsactl core dump.
Does anyone know if there are any problems with the above packages? Or if there are other important logs other than journactl, dmesg, and pacman.log I can try looking at to troubleshoot this? I apologise for not being able to provide much more information, as I said I can't seem to find anything out of the ordinary in the aforementioned logs.
Any help would be appreciated.

Crash still occurs...now found this in dmesg
[ 2.425173] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20121018/utaddress-251)
[ 2.425179] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.425250] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251)
[ 2.425254] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.425258] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[ 2.425260] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.425261] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[ 2.425263] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.425264] lpc_ich: Resource conflict(s) found affecting gpio_ich
I have looked online about these though, and so far it looks like it doesn't actually make anyone crash
EDIT: Also found that this is not actually a kernel bug...hmm.
Last edited by thesystematic (2013-04-16 00:51:03)

Speed of processor is being limited by system firmware after BIOS update

Hello,
I have updated the BIOS of my G510 to the latest version, which is 3.09. But after this update, I have noticed "The speed of processor is being limited by system firmware" entries at the Windows System event log. They are like that:
"The speed of processor 0 in group 0 is being limited by system firmware. The processor has been in this reduced performance state for 5 seconds since the last report."
I'm getting this message for all the cores, from 0 to 3.
Why is this happening? And what can I do, should I downgrade the BIOS to the previous version?
Thanks

Hello pka4916,
You’re having a problem with the speed of your processor.
Do a hard reset.
Turn the computer off.
Remove the power cable and the battery.
Hold down the power button for 15 sec while booth power sources are removed.
This should reset the hardware in the computer.
As you turn it back on tap the F10 key. This will load BIOS setup utility.
Press F9 to load defaults.
Press F10 to save and exit.
When the computer boots back up, check to see if everything is working.
If the problem is still not fixed Try to roll back you BIOS to a version that was working correctly.
Here is a link that will walk you through the steps.
Let me know how everything goes.
Have a good day.

N97 system error after software update

hello there...
I've recently updated my N97 software to 21.0.045 (the last one)... and right after the update is finished, it gave me "system error" on installing... and now I can't get access to the clock, the calender and others... it even stops responding for a while each time I open sittings... and there is no theme effects when the screen flips to landscape even if it is on... please people, I really need help in that, the clock, alarms and the calender are soooo important for me !!!
thanks
Any fool can make things bigger, more complex and more violent. It takes a touch of genius and a lot of courage to move in the opposite direction.
Solved!
Go to Solution.

psychomania wrote:
I'm not being offensive. Just stating facts.
I am simply highlighting the fact so that the user will see it and be aware of what you suggested would do. Sorry if you took offence at that but the user comes first.
of course customer first , i'm doing this with happiness , cause i'll be very happy to help them without reaso
psychomania wrote:
starting petty arguments to cover up your mistakes like you did yesterday.
i'm not covering up my mistakes , what mistakes do u mean ?? yesterday , i said that i said that because it's in Nokia warranty of the authourised nokia resellers in my region and didn't know that this doesn't apply all over the world
psychomania wrote:
This forum exists to help people, not for you to spam posts without thinking about the consequences.
it's not for me, it's for all NOKIA users, and i'm not spamming as if i was that, so how could i stay all that time, solving others problems with alot of thanx
even if i solved 2 problems , that proves that i'm not spamming
so .... welcome bro in NOKIA USERS discussion board
-you can show appreciation to my posts if it helped or useful by pressing the green Kudo star beside my post that hepled
-if my answer was the solution , so click accept as solution button
Started From Nokia 3310 , Now with Nokia N97 v.22.0.110 + N900 PR1.2

Data Plan Activation Failure after I updating to 8.0.2

After I updated my Ipad2 to 8.0.2, I have not been able to use my cellular date. It keeps "searching" for connection and then pops up "Data Plan Activation Failure". What do I do?

I turned gmail off and turned on iCloud email. It won't load either.

Complete Startup Failure after software update (?)

Hello,
I just updated my computer - G4 Silver Desktop - with the latest offering from Apple, which I think included updates for OS X, iTunes, & Quicktime.
However, immediately after this update, the computer will now no longer get past the initial 'Grey/Apple' screen. It begins and spins for a while, and then just shuts down completely.
I am searching for my Startup Disk in my stacks of stuff right now, but I am wondering if anyone can provide other suggestions to help.
thank you!
John

Try starting in "Safe Mode" (hold shift at startup)
http://docs.info.apple.com/article.html?artnum=107393
If your computer starts up, repair permissions, verify disk (both in Applications/Utilities/Disk Utility)
If you are able to get to apple.com, download the "Combo" update and avoid the "Software Update..." (use that to see what is needed and get them from the apple.com site) re-apply the update and restart.
I'd start there. Post any results.
Good Luck

System failure after critical updates auto downloaded on HP-DV7 17.3" AMD Quad Core

Similar Messages

Maybe you are looking for