System failure during locking GL 401000

Dear All,
At the time of J1IIN following error is displayed
"System failure during locking GL 401000"
This is Basic excise duty GL
Please help to solve the issue.
Regards,
Pravin

Dear Pravin
It seems some transaction is going on related to that particular G/L account which is open in somebody's system. Just wait for a few minutes and try later.
thanks
G. Lakshmipathi

Similar Messages

System failure during locking GL account 5555 by 13113910 Message no. 8I076 and the time of saving out going excise invoice.

Hi SAP Gurus,
We are configuring the CIN Settings for our client and at the time of testing, while saving the Out going excise invoice the system is giving the error as “Balance in Transaction Error” and when pressed enter the system displays the error as “ system failure during locking GL account 5555 by 13113910.”
We have configured Out going excise duty condition types in the SD pricing procedure
and
also maintained the same condition types as mentioned below in the path IMG / LOGISTICS GENERAL / TAX ON GOODS MOVEMENT / INDIA / BASIC SETTINGS/ DETERMINATION OF EXCISE DUTY / MAINTAIN EXCISE DEFAULTS
under the headings
AR BED Cond – JEXP
AR Cess Cond – JECS
ECS AR – JHEC
And also maintained the settings in the Path IMG / LOGISTICS GENERAL / TAX ON GOODS MOVEMENT / INDIA / SPECIFY EXCISE ACCOUNTS PER EXCISE TRANSACTION and also in SPECIFY G/L ACCOUNTS PER EXCISE TRANSACTION .
But still the above mentioned error is comming.
Note : error in not coming when I am removing the JHEC condition type from the path IMG / LOGISTICS GENERAL / TAX ON GOODS MOVEMENT / INDIA / BASIC SETTINGS/ DETERMINATION OF EXCISE DUTY / under the heading ECR AR, But we need the JHEC(ie. Higher education cess) also in out going excise invoice.
Please let me know what is the issue and how to resolve it.
Thanks & Regards
Shashi

Dear We faced the same issue and almost for 20 days to get it resolved.
For this kind of error firstly Check have you activated the Liable for AT1 indicator in(IMG>>Log.General>>Tax on goods Movement>>India>>Basic Settings>>Maintain Excise registrations)
Also Have you assigned Proper GL account in (IMG>>Log.General>>Tax on Good Movement>>>India>>>Account Determination>>Account determination per Excise transaction type.
Here pl check the relevant GL has been assigned for
1.RG23A BED(for Both incoming and outgoing excise invoice updations against your ETT)
2 RG23C BED, (for Both incoming and outgoing excise invoice updations against your ETT)
3 .OFF SET,(for Both incoming and outgoing excise invoice updations against your ETT)
4 MODVAT.CLEARING, (for Both incoming and outgoing excise invoice updations against your ETT)
5 PLA BED& AED & SED,(for Both incoming and outgoing excise invoice updations against your ETT at the time of utilizations)
6 PLA CESS(for Both incoming and outgoing excise invoice updations against your ETT at the time of utilizations)
7 CENVAT ON HOLD(for Both incoming and outgoing excise invoice updations against your ETT at the time of utilizations)
8.CENVAT SUSPENSE(for Both incoming and outgoing excise invoice updations against your ETT at the time of invoice posting)
9.PLA ON HOLD((for Both incoming and outgoing excise invoice updations against your ETT at the time of TR6c)
10. CENVAT REVERSAL(For cancellations vs ETT)
11. RG23A ECS(for Both incoming and outgoing excise invoice updations against your ETT)
12. RG23C ECS(for Both incoming and outgoing excise invoice updations against your ETT)
13. PLA ECS(for Both incoming and outgoing excise invoice updations against your ETT )
14. RG23A AT1(check this more carefully)
15. RG23C AT1(check this more carefully)
16. PLA AT1(check this more carefully)
Hope this helps you...
Phanikumar

System Failure during locking GL Account 13113910 - Cenvat Suspense Account

Dear All,
While creating Excise Invoice ( in India) using J1IIN, system is giving error " System Failure during locking GL Account 13113910 " The error message No. is 8i076.
System is not allowing to create Excise Invoice.
Can anybody help me how to overcome this problem?
Thanks & regards,
Govind

<a href="https://service.sap.com/sap/support/notes/867529">Apply SAP note 867529</a>

System failure during locking GL account "co.code" by "GL a/c"

HI Experts,
When posting an excise invoice in J1IIN we are getting the following error.
"system failure during locking GL account 1800 by 13113910"
Any one have idea why we get this error?
Thanks and Regards
Om Prakash RA
FI/CO Consultant

Hi ,
This error could be caused because of many reasons,
As per my understanding, the error is encountered only
when multiple user press the SAVE button simultaneously(the error
is not encountered when multiple users run the transaction J1IIN).
While creating the excise invoice, at the time of saving system tries to
lock the GL account that is getting updated with the new balances.
Probably some one else could be changing the GL account data at that
point of time. This is a very short phenomena and is meant to keep the
data consistency.It is the intended behaviour of the system. Two users
cannot perform simultaneously on the same G/L account.
Also, Please note that while saving the Excise invoice through J1iin
you must click on the save icon only once even if you get any messages
Just press 'enter' key, instead of clicking again on the save icon.
This will not give the GL account locking error.
If you press the save icon the GL account will be locked and if you click
on the save icon again it tries to lock the GL account again and since
the GL is already locked this error will come.
So please do not click on the save icon more than once
Regards
V V

System failure, during call of function module RSWR_RFC_SERVICE_TEST

Hi Team,
     I am working with BW and Portal Integration, with the Netweaver
2004s SP 11 version. I have a issue when i run the RSPOR_SETUP program
to test the configuration.
The error is on status 5 and 12, i get the following error:
System failure, during call of function module RSWR_RFC_SERVICE_TEST,
and when i enter at the dev_jrfc.trc log file, i have the following
error:
Exception thrown [Tue Jul 10 16:12:16,687]:Exception thrown by
application running in JCo Server
java.lang.RuntimeException: call FM RSWR_RFC_SERVICE_TEST to ProgId
smxpedvc_PORTAL_EPD on host smxpedvc.grupoempresarialangeles.com.mx
with SSO not authorized: No login module succeeded.
        at
com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest
(RFCDefaultRequestHandler.java:79)
        at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest
(RFCJCOServer.java:156)
        at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java:7785)
        at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest
(MiddlewareJRfc.java:2405)
        at com.sap.mw.jco.MiddlewareJRfc$Server.listen
(MiddlewareJRfc.java:1728)
        at com.sap.mw.jco.JCO$Server.listen(JCO.java:8145)
        at com.sap.mw.jco.JCO$Server.work(JCO.java:8265)
        at com.sap.mw.jco.JCO$Server.loop(JCO.java:8212)
        at com.sap.mw.jco.JCO$Server.run(JCO.java:8128)
        at com.sap.engine.core.thread.impl3.ActionObject.run
(ActionObject.java:37)
        at java.security.AccessController.doPrivileged(Native Method)
        at com.sap.engine.core.thread.impl3.SingleThread.execute
(SingleThread.java:100)
        at com.sap.engine.core.thread.impl3.SingleThread.run
(SingleThread.java:170)
Could you help me to solve this issue.
Thanks so much.

Have you checked the user that is used to connect from J2EE back to ABAP?
I had a similar problem, went into the Visual Administrator and found the incorrect password (or possibly outdated password) was being used to communicate back to ABAP, and updating that sorted out my problem.
Hope this helps.
Cheers,
Andrew

Problem while determining receivers using interface mapping: "SYSTEM FAILURE" during JCo call. Bean SMPP_CALL_JAVA_RUNTIME3 not found

We have a SOAP to PROXY scenario Which is in Production.
We keep getting the Error:
" Problem while determining receivers using interface mapping: "SYSTEM FAILURE" during JCo call. Bean SMPP_CALL_JAVA_RUNTIME3 not found on host XXXXXX, ProgId =AI_RUNTIME_XXX.
We are using Standard Receiver Determination with single receiver without any condition. And no mapping being used in interface determination.
What are all the possible situation where we face such as this issue in Production.

Please check the SAP note
# 1706936 - messages fails with error java.lang.RuntimeException Bean SMPP_CALL_JAVA_RUNTIME3 not found
1944248 - PI unstable due to JCO_SYSTEM_FAILURE mapping issues

System failure during call of function module RSWR_RFC_SERVICE_TEST in BW

Hello All,
            I am doing configuration with BW and EP portal when we run the program (RSPOR_SETUP) in step - 12 Maintain User Assignment in Portal = (System failure during call of function module RSWR_RFC_SERVICE_TEST) giving this error SSO is working fine.
RFC connection is working fine with BW and portal
When i execute the FM - RSWR_RFC_SERVICE_TEST it is giving error (SYSTEM_FAILURE) and in Portal side log file it is giving below error.
dev_jrfc.trc
Exception thrown [Fri Sep 05 15:14:57,928]:Exception thrown by application running in JCo Server
java.lang.RuntimeException: Bean RSWR_RFC_SERVICE_TEST not found on host (Hostname), ProgId=EPP_PORTAL_SID: Object not found in lookup of RSWR_RFC_SERVICE_TEST.
        at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:138)
        at com.sap.engine.services.rfcengine.RFCJCOServer$J2EEApplicationRunnable.run(RFCJCOServer.java:269)
        at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
        at java.security.AccessController.doPrivileged(Native Method)
        at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
        at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Please help me find the solution.
Thanks
Gurpal

Hi Gurpal,
Please go through the below SAP notes
878455
- Information broadcasting: No portal user exists
814083
- Inf. broadcasting: Changed RFC settings as of NW 04 SP11
1135947 - Bean not found
Hope this solves your problem.
Regards,
Prithviraj.

"SYSTEM FAILURE" during JCo call.java.lang.reflect.UndeclaredThrowableExcep

Hi All
I have developed Java mapping program where I am calling three BAPI in sequence and trying to map all three bapi data to single Target XML file or Multiple target xml files depends on the in coming data.
Now I want these files name should be genereted dynamically .So I have used below Dynamic Configuration code in my java mapping program.********************************************************************************************************************************************************************
try
     String currDate = new String();
     String currTime= new String();
     DateFormat dFormat=new SimpleDateFormat("yyyyMMdd");
     DateFormat tFormat = new SimpleDateFormat("HHmmss");
     java.util.Date date = new Date();
     TimeZone cetTimeZone = TimeZone.getTimeZone("CET");
     tFormat.setTimeZone(cetTimeZone);
     currDate = dFormat.format(date);
     currTime= tFormat.format(date);
     String pubDate=currDate + currTime;
     String ext=".xml";
     String event="-1_1-";
     trace.addInfo("******** Before Dynamic Configuration ***************" );
     DynamicConfiguration conf =(DynamicConfiguration)container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
                                        DynamicConfigurationKey key = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/File","FileName" );
     trace.addInfo("******** After Dynamic Configuration ***************" );
     String tempFileName="NL09-"eventponum+ "-" pubDateext;
     trace.addInfo("The name of the file is : " + tempFileName);
     conf.put(key, "tempFileName");
            catch (Exception e)
                 trace.addWarning("Error While creating File Name"+e.getMessage());
                 throw new Exception("Error While creating File Name",e);
Now the problem is when I am using above code I am getting following error
"SYSTEM FAILURE" during JCo call.
java.lang.reflect.UndeclaredThrowableException
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">JCO_SYSTEM_FAILURE</SAP:Code>
<SAP:P1>java.lang.reflect.UndeclaredThrowableException</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>"SYSTEM FAILURE" during JCo call.
java.lang.reflect.UndeclaredThrowableException</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
Could please tell me why I am facing this problem only when I am using Dynamic configuration code.
If I dont use Dynamic configuration code then I am not getting any error .But my requirement is to generate dynamic file name (Note I have tried with Variable Substution also, It is also not solving my problem as I need time stamp of ("CET") time zone).

Hi Abhishek,
Yes I have appended throws StreamTransformationException and imported the relevant StreamTransformationException class also.
Here I am getting strange thing when I am adding dynamic configuration code " SYSTEM FAILURE" during JCo call. But Jco cal is something to internal systems which does not relate to Dynamic Configuration.
If I run my code with out any Dynamic Configuration code then it is running with out any errors.
But I need this Dynamic Configuration inorder to generate dyanamic file name.

"SYSTEM FAILURE" during JCo call. max no of 100 conversations exceeded

Hi Experts,
My scernario is : RFC->File Asynch
When i do testing this scenario in Configuration (ID) -> tools-> test configuration I got below error.
Interface Mapping
Runtime error
"SYSTEM FAILURE" during JCo call. max no of 100 conversations exceeded / CPIC-CALL: 'ThSAPCMRCV' : cmRc=17 thRc=45
1) I have created incremented 100 to 300: Set the following environment variable CPIC_MAX_CONV=300
2) In sender RFC communication channel i have all correct parameters like: gateway service,Program ID, client number, password, userid etc
Pleas help me out.
thanks
siva grandhi

hi,
se this
/thread/174978 [original link is broken]
Look at SAP note 314530,316877
set this enviroment Variables:
set CPIC_MAX_CONV = 500 (WINDOWS)
setenv CPIC_MAX_CONV 500 (unix)
also check the rfc destination JCO_RUNTIME_JCOSERVER
AI_RUNTIME_JCOSERVER. if u have any error in this RFC plz refer to this link
http://help.sap.com/saphelp_nw04s/helpdata/en/9b/da0f41026df223e10000000a155106/frameset.htm
Thanks
Rodrigo
ps:reward points if useful
Edited by: Rodrigo Pertierra on Mar 26, 2008 11:59 AM

IDVD encoding causes system failure during burn process

I have iDVD 5 on my work computer (dual 2.7Ghz G5 / 2.5 G RAM), and have burned successfully before my current project.
My current project has a 28:45 movie and I have tried two different themes with different combinations of drop zones (one with the movie as the drop zone and one with stills only) and everything previews okay, but when I start the burn process it will get to a certain point in the encoding and then the whole system crashes. I come back to check on the process, and my screen is filled with black squares with error info in it... (looks like a DOS screen or something) and it says something about system failure and that I need to restart my computer.
I'm so stubborn that I keep trying different combinations of possibilities but I'm having no luck. The movie that it's hangin up on was captured in Final Cut Pro from a VHS, edited in Final Cut to trim the excess black, and exported as a Final Cut Movie that I imported into iDVD.
As I said above, I have burned successfully on this computer and this iDVD, so the fact that this one project refuses to burn is perplexing.
any thoughts?

A gap in video would be a space between one clip and another. This is a problem when you are editing your footage, not capturing it. In other words, it is a user introduced problem.
In FCP when you say "Ignore Timecode Breaks" it just means to continue capturing video even if there is a timecode break. If you do not select this option, FCP would immediately stop catpturing whenever it hit a timecode break. A timecode break is not the same thing as a gap you create during editing. A timecode break could be as simple as rewinding your camera footage and then recording over it... the timecode now has a break because it is not continuous timecode, it jumps from one timecode to another.
Depending on what device you are capturing from, your audio may come in a few frames before or after the video. This would be especially true for a non-controllable device. It is a simple fix to adjust this as you would have noticed any sync issues right in the timeline during playback.
A system reboot in the middle of encoding is a serious crash... I doubt if it is the footage per se that is causing this to happen. Footage has been known to force an application to abort a process (or stay in an infinite loop), but an actual system shutdown would be extremely rare.
Consider recapturing the footage into a new FCP project and then creating a new iDVD project for it, this will eliminate either a corrupted FCP file or an iDVD project from the equation. Also, are you burning directly to disc or are you preparing a disc image? I'd go with the disc image approach because you can test your final build that way.

System error during lock operation. Execute diagnostics in SM12

When I am executing sm12 I am getting below error...
Diagnosis
An error occurred in the SAP lock management whilst trying to to lock an object by calling the ENQUEUE function module.
System Response
The SAP System is unable to enter the required locks in the lock tables managed in the ENQUEUE server. The ENQUEUE function module therefore triggers an exception. If this exception is not handled by the application program, the current transaction will be automatically terminated.
when trying to see sm12>Extras>statistitics
Unable to open statistics file: /usr/sap/PP1/DVEBMGS56/data/ENQSTAT
(I changed this permissions to 777 but still getting the same error)
when trying to open connection i am unable to changes in su01
getting error--System lock administration error. Please notify
your administrator
+++++++++++++++++++
I am not able to change as well in su01, but able to display.
some one pls help me out from here.

Although the post is old - I thought we can post a small input that can help any future searches on the same error " System Lock Administration Error. Please Notify your administrator"
The issue has been resolved by our Basis Team. They did notice issues with Replication and one of the enqueue is on a different note in a multi node setup. The team had to restart the system and make sure the enqueue is on the same node as of replication.
Hope it helps.
Regards,
Sri

System Error occured during lock management in activating BI Content.

In trying to activate BI content, 'InfoObject Actual for Netweaver Demo', on clicking install after selecting the grouping settings, i get the error message
"System error occurred during lock management"
What causes this problem and how do i successfully install BI content?. Please assist.

Hi,
The error indicates missing or inactive message/enqueue server or network problems.
Please follow the steps below to help troubleshoot the problem
1. Logon to each server separately and goto SM12->Extras->Diagnostics to test the connections for the enqueue server. This will test the access of each server.
2 Use SMGW and SM59 to test the RFC connections. See SAP Note 47682.
You may want to have your network administrator/Basis people test the connections & analyse the network.
Use the message server/logon group testing tool "lgtst" (Note 64015), & the "niping" program (Note 500235) to diagnose the network.
Have a look at attached note 124562 in order to check if you have a hostname resolution problem.
Check your DNS / network setting that this kind of problems can not lead to blocking situations of the dispatcher.
To avoid the blocking of the dispatcher you can set the parameter
rdisp/reverse_name_lookup = 0 to avoid such situations.
Best of luck.
Rgds,
Colum

System error occur during lock managment?

Hi all !
When I open the adminstrator workbench I am gettting the error " System lock occured during lock managment.
I can open other sessions such as RSPC, RRMX etc.
Can anyone help in this regard?
Regards
Durai

Hi,
I can suggest how to access administratoe workbench without using T.code:RSA1.
Go to T.code RSD1 then in Menu >Environment>Object Browser via AWB.
Try this for time being to access RSA1 and inform to BASIS guy he will solve the problem.
Assign points if helpful
Thanks & Regards,
Bala

After Effects can't continue: unexpected failure during application startup

Im running 10.10, Mac OSX, it was running fine before a minor update came out, and now I can not open AE CS6. I have uninstalled, reinstalled it, installed the trial of CC 2014. No messages beside "After Effects can’t continue: unexpected failure during application startup" come up.
System log:
Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: WARNING: The Gestalt selector gestaltSystemVersion is returning 10.9.0 instead of 10.10.0. Use NSProcessInfo's operatingSystemVersion property to get correct system version number.
            Call location:
Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 0   CarbonCore                          0x00007fff82bb637d ___Gestalt_SystemVersion_block_invoke + 113
Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 1   libdispatch.dylib                   0x00007fff8bf70fa2 _dispatch_client_callout + 8
Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 2   libdispatch.dylib                   0x00007fff8bf70f00 dispatch_once_f + 79
Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 3   CarbonCore                          0x00007fff82b5e932 _Gestalt_SystemVersion + 987
Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 4   CarbonCore                          0x00007fff82b5e51f Gestalt + 144
Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 5   AdobeCrashDaemon                    0x0000000100002e69 -[MyDaemon GetOSVersionMajor] + 33
Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 6   AdobeCrashDaemon                    0x0000000100002d4a -[MyDaemon isRunningOnLeopard] + 25

Well, looks like a bug in Yosemite. You might wanan read the pertinent announcements, anyway. At this point Adobe apps are not compatible with OSX 10.10.
Mylenium

Product Instance Registration Error Message: "System Failure: Error while retrieving xml file from database"

Hi Planning installation Gurus,
Did u get any luck to resolve this problem as i am also facing same problem "Error creating instance" during install of Planning 9.3.1. i tried 30-50 times reconfiguration every time same problem..
OS: Vista Premium
SQL Server 2005
Essbase:9.3.1
Error Message: "System Failure: Error while retrieving xml file from database"
Details of error:::::::::::::::::::::::::
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
java.lang.NullPointerException
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
java.lang.NullPointerException
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
Pls provide Solution

Hi John,
though i am trying with SQl server authentication with different user but still status is same of planningSystemDB.properties
SYSTEM_DB_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
SYSTEM_DB_URL=jdbc:hyperion:sqlserver://neeraj-PC:1433
SYSTEM_DB_USER=windowsAuthentication
SYSTEM_DB_PASSWORD=CAFBAEFNBGEAABHEDOADFKADACBGBIFHBLCDFBAFFH
SYSTEM_DB_CATALOG=plandb
SYSTEM_DB_TYPE=SQL
INSTANCE=
my steps:
Using SQL Server Management Studio
Changed Widows authentication to SQL server authentication mode
In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
To restart SQL Server from SQL Server Management Studio
To enable the sa login by using Management Studio
In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
On the General page, you might have to create and confirm a password for the sa login.
On the Status page, in the Login section, click Enabled, and then click OK.
In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
On the General page, you might have to create and confirm a password for the sa login.
On the Status page, in the Login section, click Enabled, and then click OK.}}}
anything else should i change.................

System failure during locking GL 401000

Similar Messages

Maybe you are looking for