System Failure while running Adobe Dreamweaver CS6 for the first time..Why?

When i downloaded the adobe dreamweaver cs6 and during installation ... there is no wrong except screen resolution (required = 1280*800 but available = 1330 * 768)
But when i tried to run the program for the first time, the system had failed.
Can you help me to know the true cause, please?
note: i use Windows XP sp1

CS6 requires a minimum of Windows XP with Service Pack 3. Your vertical resolution also does not meet the minimum requirements.

Similar Messages

I am installing CS6, for the first time, on a Mac, from a CD. I have a valid serial number that I just obtained. When I enter the serial number, it is not validated and I cannot continue.

I am installing CS6, for the first time, on a Mac, from a CD. I have a valid serial number that I just obtained. When I enter the serial number, it is not validated and I cannot continue.

Error "The serial number is not valid for this product" | Creative Suite

Problem running Illustrator CS6 for the first time

Hi!
I just installed Illustrator CS6 from the Creative Cloud and the following message appears as I try to start the program "Unable to set maximum number of files to be opened" and then it closes again.
Can somebody help me?
Many thanks!

This was a known bug for some users in 16.0.0. It seems to have gotten fixed in the latest update (16.1.0) that was released end August. Run the update (look under Help > Updates) and hopefully this issue should get resolved.

I installed adobe digital editions for the first time. But i cannot activate. always the same fealure: Aktivierungsserver-Fehler Code: E_ADEPT_REQUEST_EXPIRED ... but i'm shure, the date &time is correct. I tried all suggestions in the forum

Bei meinen Versuchen Adobe Digital Editions zu aktivieren kommt trotz richtiger ID und PW immer: "Aktivierungsserver-Fehler Code: E_ADEPT_REQUEST_EXPIRED ...
Was kann ich tun?

I have the same problem!! the ID adobe is right and the password as well! fuckk!!!!! please hlp us!!!

IPhone restored while attempting to update it for the first time through Itunes, is there anyway to get my apps, contacts, and photos back?

I purchased an IPhone back in April but have yet to ever update it using the itunes. Today I installed ITunes64 version 10.5.0.142 and connected my IPhone to my PC. After this I went to the IPhone and clicked the check for updates button. After updating my phone was restored and I had lost all of it's contacts, apps, photos, and everytihng. Is there anyway to recover my stuff?
Tom

In the process of updating the iphone,the update process performs a backup of your phone prior to updating the ios software. Connect your phone via usb,if itunes doesn't luanch,then luanch the app manually,on the left side pane of itunes the name of your phone will be listed under devices,right click on the name of your phone,and select restore from backup, then just follow the process. In the future it's very important to backup your iphone on a regular basis via icloud or itunes.Hope it all goes well for you
After rereading your oringinal post, I would first just resync it via itunes on your computer before I did a rstore from backup.

Problem with running Premiere Elements 12 for the first time.

I have just purchased a download version of Premiere Elements 12.0 and have installed it on my PC running on Windows 7 (64 bit). On first running Elements, however, the program gets stuck on loading "mveH264Exporter.prm" and proceeds no further. I've tried uninstalling and reinstalling, but same problem. I previously had Elements 10 installed and that was working. Any advice offered would be appreciated.

First we need to check , whether the LAN settings is set to detect settings Automatically or not.
Follow below steps .
1)Open Control Panel and then click on the option "Network and Internet" .
2)Click on Internet options, click on 'Connections' tab.
3)In the 'Connections' tab, select 'LAN' settings, you will be able to view the Local area network settings box.
4)Check the box-"Automatically Detect Settings" and then "uncheck" all the other check boxes like 'Use automatic configuration script', 'Use a proxy server' , Bypass proxy server' ,then click on ok button .
5)Click on "LAN settings" button again , make sure "Automatically Detect Settings" is the only option selected, keep the LAN properties window open.
Then launch Premiere Elements 12 and try to sign in.
If the settings were already set like that or you face same issue after signing in , let me know

Error occured while creating site collection for the first time in SP2013

While creating a new site collection in SharePoint 2013, I need to do atleast 4 times " Go back to Site" begore it appears properly. Could you please let me know why this error is occuering while we create site collection for the first time.
Is it aknown issue or due to RAM contraints.I am using 16 GB of RAM in Web tier.

You can get by with 16 GB of RAM so I am guessing that is not the cause. Although, you could verify your memory utilization during the process. As long as you don't exceed 95% you should be fine. Next time, I would instead look up the
error in the ULS logs using the correlation id and see if you can get more details of what is causing the error.
Corey Roth - SharePoint Server MVP blog:
www.dotnetmafia.com twitter: @coreyroth |
SP2 Apps

Known Issue while running Adobe Story desktop application for the first time on Mac OS 10.8

You may encounter the following error message while running the Adobe Story desktop application for the first time on Mac OS 10.8:
For resolution, please go to:
http://helpx.adobe.com/story/kb/run-story-app-mac-os.html

The /Developer directory contains the compiler(s) and various tools and libraries.
Does your user account name really contain a single quote? If so, it looks like the quote is getting eaten by one of the build scripts, which is resulting in a file path that doesn't exist.

I am trying to run my registered CS6 Design Standard programs for the first time after install. InDesign runs OK, but Illustrator and Photoshop will only run in trail mode. How do I activate those two?

I can't get my registered versions of CS6 Photoshop and Illustrator to run in full mode. I installed CS6 Design Standard online end of June (an upgrade from CS5.5), on my old MacBook Pro. I didn't run the programs then as I was waiting on arrival of new MacBook Pro. I migrated the programs from my old MacBook to the new, and today tried to run those programs for the first time. InDesign work OK (after an initial hiccup) but Illustrator and Photoshop will only run in trial mode, and won't let me save files. My CS6 Design Standard shows with it's registration in my Adobe Account. All seems in order, but Illustrator and Photoshop won't run in registered mode. Can you please help?

Demons1 in the future please only migrate your documents and settings.
Please use the uninstallers to remove your current installation. They are located in the Applications/Utilities/Adobe Installers folder. Once the uninstall is complete you will also want to run the CC Cleaner Tool. You can find more details at Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.
If you need to download a fresh copy of the installation files for Creative Suite 6 you can do so at Download CS6 products.

I have just installed iTunes for the first time. When I run the application I get a "iTunes not working" message. Operating system Vista (32 bit). I have tried reinstalling with all firewalls off, but still no success. Have other people had this problem?

I have just installed iTunes for the first time. When I run the application I get a "iTunes not working" message. Operating system Vista (32 bit). I have tried reinstalling with all firewalls off, but still no success. Have other people had this problem?

Drrhythm2 wrote:
What's the best solution for this? I
Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer.

Building a system for the first time

I recently posted a few weeks back about buying a system from either Dell or HP http://forums.adobe.com/thread/732545?tstart=0. I quickly learned that those systems were not going to fit my need based on my budget. So, I decided after researching components that I will build a computer by hand for the first time. I am still operating on a budget of around $1000, but I'm giving the budget a bit of flexibility so I don't limit my options. I am a hobbyist who only has experience using Power Director on my laptop, but I had a lot of fun editing for the first time and I want to step up my game. With the new system, I plan to use adobe premiere cs5 and after effects. I will capture my video from either an HD Helmet cam or HD flip format is MPEG-4 AVC/H.264. So where I need help is selecting the right things to optimize my performance. The following is a list of items I'm looking with their prices. Please help me decide what will be right for me. Open to any combo of suggestions or comments. Thanks!
Processor
Intel i7 930 $200 microcenter
Intel i7 950 $230 microcenter
I don't know if I want overclock yet, but it sounds like a good idea. $30 for the upgrade to the i7 950 seems pretty good. ro do I use the money elsewhere?
Motherboard
GIGABYTE GA-X58A-UD3R $210
http://www.newegg.com/Product/Product.aspx?Item=N82E16813128423
Seems like a good mobo. Are there any features that this board lacks that I should look for in another board? Also, newegg offers significant deals on "open box" products. Is this a good way to go?
Ram
I have a few questions for this selection. I've currently budgeted approximately $250 for ram. I'm looking at going with 12GB. I certainly don't have the budget for 24GB, but what about 16GB?
Do I look for 1333 or 1600? 2GB or 4GB sticks? Would I be fine if I bought say 2 packs of 6GB ram, both same manufacturer and same type or would I want to buy 1 pack of 12GB?
GPU
Nvidia Geforce gtx 460 1GB $220
Is it worth it to go to the 470? I know it's a better card but being a budget is really worth the upgrade or can I get away with a 460?
Any recomendations for a 460 as there are many in the same price range?
Drives
I see these drives priced in the $55 range which would leave at around $220 for the lot of em
These are the drives I'm looking at as they are highly recommended on this board:
SAMSUNG Spinpoint F3
WD Caviar Black
Right now, I plan to buy 4 drives. Do I want 4 of the exact same? or say 1 cavier black for os/ programs and 3 samsung f3 for pagefile/scratch/renders? Can I also get a brief description of what these are too? Also, could have a 500gb for os/programs and 1tb for the rest or would it be advisable for 1tb for all? or 500gb for all?
I don't think I can do a raid setup based on my budget, but I saw this as an option on the thread for storage rules is to use the on-board IHCR or Marvell chip. I don't know really anything about this, but what would the price be to explore this option?
Case
Cooler Master Storm Scout $90
http://www.newegg.com/Product/Product.aspx?Item=N82E16811119196
I picked this case for a few reasons. I seem move about every 6 months so the handles on top would be very useful, and it seems to have good cooling. I know a full size case is recommended, but they seem to be significantly more.
Cooling
Noctua NH-U12P SE2 120mm SSO CPU Cooler $75
Everywhere I look this cooler seems to get great reviews. I figure it could be a good idea to get a good cooler if I get a mid-tower case.
The only other option I can think of for case/cooling is to combine the budgeted price for both and look at different options like a full size case with a less quality cooler. Is this a better option
PSU
Looking into an 850 W power supply. I figure to budget $80 towards as I've seen a few in that range
http://www.newegg.com/Product/Product.aspx?Item=N82E16817517003
so would something like this work?
Final Thoughts
So, when you add it all up its about $1350. First question, how does this look overall? Nothing I've chosen is obviously overkill, but is there anything I can afford to go cheaper on? or anything I should invest more into?
Thanks again to everyone for the help. The resources, info and people on this forum have just been awesome.

Seems like we are planning very similar PCs. My build is going to be for: amateur video editing including animation mainly with CS5, application design and coding mainly with MS Visual Studio 2008, HTPC (until I build a cheap dedicated unit for the TV), general family computing. I am new to this stuff, but can at least share some pricing and my decision making process so far.
Here is what I have selected so far regarding the parts:
MotherBoard: Gigabyte GA-X58A-UD3R x58
Seems like one of the lower cost x58 MBs and has some decent reviews. Wait for a sale, you should be able to find this for around $180.00. That is how much I got it for from New Egg (straight up with savings code no rebate), should be arriving on my doorstep tomorrow. Also, I think Fry's has it now for $170.00 in store, but that includes a $20.00 rebate and tax.
PowerSupply: Corsair TX650W
Some might think this is on the low side. On the other hand, I have gotten other conflicting advice, stating that many people overestimate their actual power needs. So who knows. I have read that a PSU works more efficient when it is matched to the power needs - meaning that a 1000w PSU that is generally seeing 200w usage might not be so efficient. Anyway, I got the PSU for $50.00 from New Egg (with rebate), and it has a good reputation, so we will see how it goes.
Graphics Card: GIGABYTE GV-N460OC-1GI GeForce GTX 460 (Fermi) 1GB 256-bit GDDR5
I was planning on a lower cost card, but then noticed this card for sale over the weekend for $178.00 (with rebate), so I ordered one. I have read the GTX460 has reasonable power requirements, and can be made to take advantage of CUDA/Mercury with CS5 (although haven't done much research into that). This particular version based on reviews, seems fairly quite with the twin fans. It's possible I overspent a bit on this card considering my needs, time will tell.
Here is what I am planning to purchase:
CPU: i7 930
I am fortunate to live near a Fry's and MicroCenter ($200.00). From reading the forum, seems like this is generally the lowest CPU folks go in terms of building an editing machine. I understand the argument that for only $30.00 more, one can upgrade to the i7 950. On the other hand, that argument could be made for many of the components, and then before you know it, a little extra here and there, and the budget is shot:) So I am planning to draw the line at the 930.
Here are my undecided’s:
Memory
I am up in the air between 6or12gig/module compatibility/cost. But one thing for you to keep in mind, is the official memory certified for the motherboard you select. For the Gigabyte motherboard, I missed out on a recent RAM deal, because the RAM was not officially certified for the board. Some people tell me this is important, while others say "RAM is RAM" and no big deal. Something to consider.
HardDrives
Same as you, considering the Samsung Spinpoint F3. Good prices now at MicroCenter on the 16MB cache models in 500 and 1TB sizes. I just don't know if larger cache sizes are important or not, since they are also offered in 32MB and higher.
Anyway, good luck with your build and hope it works well.

For the first time, I'm trying to use adobe premiere elements10 that came with my pc Windows 8. I created a single project, saved it but cannot open it. My pc shows the file I created but I get an error message that says this type file is not supported or

For the first time, I'm trying to use adobe premiere elements 10 that came with my pc Windows 8. I created a single project, saved it but cannot open it. My pc shows the file I created but I get an error message that says this type file is not supported or the codex is not installed. As a test, I created another very small project and get the same error message, when I try to open it. Pls give me a simple answer, a refund or a phone

mike frischenmeyer
What computer operating system is your Premiere Elements 10 running on? And, what video card/graphics card does that computer use?
Is this the first time you are using Premiere Elements 10 or have you worked with it before successfully? There is no easy solution until we
know the details and troubleshoot to determined what caused the problem.
1. Can you open a new project?
2. After you saved/closed the problem project, did you move, delete, or rename any of the files/folder that were related to the source media
for that project?
3. Please review the Adobe document on troubleshooting damaged projects.
Troubleshoot damaged projects | Adobe Premiere Elements
4. What are the steps that you are using to reopen this saved closed project.
a. File Menu/Open Project/Name of Project
b. Other
Please review and consider and then we can decide what next based on your further details and results..
Thank you.
ATR

How to find that a java program is running for the first time on daily basi

it is like this
1. i will ran a java program every day and i have to find that it is running for the first time(as i may stop that program and may run again the same day )
Pls share ur ideas

san.kumar wrote:
it is like this
1. i will ran a java program every day and i have to find that it is running for the first time(as i may stop that program and may run again the same day )
Pls share ur ideasAs kajbj said - you need to store a token / file with a run date on the file system. Each time the application runs, have it compare with the date from this file with the current date. If different, it's the first run of the day. If not, it is not the first run of the day. Each time have it update the date on the file.

How can I run 2 Dreamweaver windows at the same time?

How can I run 2 Dreamweaver windows at the same time on my
PC?
basically I have 2 monitors and I want to edit CSS on one
monitor and have the html page open on the other so I can quickly
look from one to another with in a split second instead of taking
that extra time to switch back and forth using the tabs at the top,
I know I should probably invest into a mac so i can work out side
of the Dreamweaver application window and I will in the future but
is there any way i can do this on my windows XP pro PC?
Thank you
Maurice

Open the CSS in DW, and use F10 to open the Code Inspector.
Place the
latter as needed.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Random_Yggdrasil" <[email protected]> wrote
in message
news:gi2htb$j4j$[email protected]..
> How can I run 2 Dreamweaver windows at the same time on
my PC?
> basically I have 2 monitors and I want to edit CSS on
one monitor and have
> the
> html page open on the other so I can quickly look from
one to another with
> in a
> split second instead of taking that extra time to switch
back and forth
> using
> the tabs at the top, I know I should probably invest
into a mac so i can
> work
> out side of the Dreamweaver application window and I
will in the future
> but is
> there any way i can do this on my windows XP pro PC?
>
> Thank you
> Maurice
>
>
>

Getting error while synchronising for the first time to get Device ID

Hi All,
When I am trying to synchronise for the first time to get device ID I am getting following error.
Could any body through some light on this please.
Synchronization started
Connection set up (without proxy) to: http://XYZ:portno/meSync/servlet/meSync?~sysid=MOB&
Connection to server failed.
Synchronisation problems: Transport-layer (http) sync exception raised (root cause: Exception while synchronizing (java.io.IOException: Not in GZIP format))
Regards,
Ameer Baba.

Hi,
please let us know what patch level your middleware is running on.
The mobileengine.config file is placed in the MI client installation directory in subfolder settings. On PC it is in
c:\Program files\Sap Mobile Infrastructure\settings.
From the URL you mentioned above you are using the "old" technology. Please go the service.sap.com/instguides and follow the setup guid for the old technology.
When you enter the URL directly into the browser you should get a LOGON popup. This shows the service is running. I would expect that you do not get this popup due to missing setup.
If you want to use the new sync service in SICF and you have configured this. have a look into the manual. In that case you are missing some settings on the MI client. The problem is, that the old MI client uses old sync service by default.
Regards,
Oliver

System Failure while running Adobe Dreamweaver CS6 for the first time..Why?

Similar Messages

Maybe you are looking for