System fan error on g62-352ca on startup. are there two fans ie a cpu fan and a system fan?

I get a system fan error on power up? Are there two fans in the G52-352CA? Ie a general system fan and a CPU cooling fan or just the one CPU/heatsink fan?
If it is the CPU/heatsink fan then there are 4 part numbers for different options. Is there some way to tell from the model number or features as to which is needed. I would prefer to have the part in hand before opening everything up. Are there better fans to buy and if so how do I find them? This unit was always running a little on the warm/hot side,

Hi,
Could you add the error message to the next reply?
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Similar Messages

There is no PSA for InfoSource 8ZCCA_O09 and source system BWPCLNT800 RSAOD

Hi All:
We make a Heterogeneous system copy of BW 3.5. from Solaris 9-Oracle 9i to AIX 3.5-Oracle 9i.
We must have to rename the Logical System Name and during the Functional Testing the users configured the conections again in RSA1 transaction, then they start the
testing phase but get the next error in the Monitor-Administrator Workbench:
"@5C@ 28.02.2008 19:59:31 There is no PSA for InfoSource
8ZCCA_O09 and source system BWPCLNT800 RSAODS 203"
We can see that the errors refers to the old (BWPCLNT800) Logical
System Name; during the configuration of the RSA1 they renamed the
Logical System Name of the BW System to BWNIUSA800.
We found the SAP Note 518426 but we are not sure about if we can
execute it without affecting the system or the configuration.
Some one Can help us ?.
Best Regards
Reynaldo Rebolledo.

Hi Reynaldo,
this forum here is related to SAP NetWeaver Master Data Management. Your question seems to be related to SAP BI. Please raise your question in the [BI Forum|/community [original link is broken];, because I do not think that you'll find the experts to answer your question here.
BR Michael

There is no PSA for InfoSource ZOUTNBR_TEXT_CC and source system PCFILE

Hi All
The above subject line shows the error.
I have a custome data source in Development that is ZOUTNBR_TEXT which has a source system PC file.(flatfiles)
when i transported all transfer structures and data sources from Development to Quality, only my transfer rules were not activated. but when i manually activated in Quality it throws with an error
There is no PSA for InfoSource ZOUTNBR_TEXT_CC and source system PCFILE
Please let me know how can i activate my transfer rules.
Archana

Hi,
We also faced the same issue while transporting from dev to QA. We raised a OSS, for which SAP has replied saying that there was some inconsistencies with the infosource and they have repaired the same in debugging mode. The root-cause for the issue is unknown. So they have not given any notes to us.
But meanwhile we created a new data source and transported it. that worked fine.
Regards,
PM

Is there any dependency between third-party adapter and XI system service?

Hi Friends,
I'm developing a thrid-party JCA adapter(deployed under sap.com) on SAP XI? In the adapter, it will use "ModuleProcessor" EJB system service.
I found sometimes if the JCA adapter cannot be started correctly, the other system service also not started. And checking the log, I found the reason the JCA adapter not started, is because the "ModuleProcessor" EJB system service is not started.
so just want to know is there any dependency between third-party adapter and XI system service?
Thanks & Regards,
Jason

Hi soo.richard,
You say it could be intruders cutting in - same problem/solution as for any network I think. Access can be password protected or access limited via MAC address filtering. I'm not sure how Apple Tv works with a hidden SSID but that would be another option.
Airplay itself can be password protected through the airplay settings.
I'm not sure if Apple TV works with other authentication such as a password but maybe the manual will assist with this?
Hope this helps.

High CPU usage and continuously running fan

I recently sent off a logicboard to be repaired for a non-charging issue. Everything worked fine with the exception of the battery would not charge. I received the board back today and noticed immediately that the fan starts running at high speed within 10 seconds of pushing the power button. It also boots extremely slow and when it does finally, eveything takes forever to open. It seems to operate better in safe mode but the fan is still running at about 6200 rpm. Using iStat, I noticed that the temperature itself is not that bad. The CPU is running at about 32 C. And it doesn't feel hot to the touch at all. But the fan never shuts off. I have tried an SMC reset and PRAM reset, no joy. I tried a new hard drive, still no joy. When I can finally get into Activity Monitor, it says that Kernel_task is using upwards of 200% of the CPU. Any suggestions on what I can try to get this kernel_task issue corrected and get the fan to slow back down? Thanks in advance for any light anyone can shed on this.
Macbook Pro 2010 13 inch
Tami

I was able to run the Apple Hardware Test and the error is:
4SNS/1/C0000008: TsOP- - 124
Apparently that has something to do with a temperature sensor. Of course, I can't find any information on how to replace it or even where it might be located. Don't even know if it's replaceable. Can't believe I just got this logic board back from being "fixed" and it's not "fixed!

Have Audigy2 in Vista, why are there two volume control icons in system tr

Hi,
I'm running an Audigy2 on a Windows Vista system. There are two volume control icons in the system tray. One is the Soundblaster control, the other is the Windows control.
Are these two programs supposed to be running at the same time? Do they conflict with one another?
Thanks for your time,
Big Al Mintaka

Hi pgaastra. I don't know why there are two items in the task bar, but you have identified the
recommended fix. The why never bothered me enough to investigate, so maybe we will both
find out now.
Matt
Message Edited by Matthew Williams on 04-16-2008 08:49 PM

Why are there virtually no mobile apps for the Android operating system?

I am trying to find mobile apps for my android tablet. Why are there virtually no mobile apps for this system?

Adobe's attitude is not only incredibly insulting and ignorant, it is also short-sighted, particularly considering the top android handsets would actually allow their apps to be more flexible and powerful as they have more RAM at their disposal and the very popular Galaxy Note series would be a perfect device with its integral stylus. This is not acceptable and makes me reconsider staying with my CC subscription. I guess it is time to start looking for adobe alternatives or at the very least demand a discount in our subscription as we are unable to use a large chunk of the subscription portfolio.

I cannot update my iphone the iphone update will download completely i then recieve an error message that my network settings are incorrect or my network has timed out and to try again later. i have tried 3 different networks

please help i cannot update my iphone . i am running itunes 10.5 and this updated and installed fine.
the iphone update will download all 774 mb but each time the download finishes i recieve the same error message.
this says that the network settings were incorrect or the network timed out please try again later.
i have tried using 3 different internet networks and the connection have been fine.

I've been getting timed out for 2 days now, what finally worked for me was not plugging the phone into the computer and just doing the update through my wifi, worked perfectly, took less than 15 minutes

Flash Player using high CPU constantly and heating system

Hi I am in India ... from last few months I am noticing that Flash Player is using too much CPU when ever I run IE, Explorer or opera ... when I disable Flash Player then IE and opera work on normal CPU ... I have uninstalled Chrome since I was unable to disable flash player on it ... I have 2nd generation i5 .. 3gb ram ... dedicated 1gb nvidia graphics card ... 750 Gb hdd ... win7 home premium 64 bit ... I am able to easily play Crysis 2 ... halo ... far cry ... wolfenstein 2009 and many more intense graphic games on my laptop without over heating it ... but flash player causes excessive CPU constant use and system to over heat if I watch a complete movie on you tube ... any other compatible player available plz do tell ..... rgds

Hi ... I use admin account only to install new software or games ... for all other uses I log in as an ordinary account
But even when logged in with admin account the same prb persists ... cause of this flash player prb I have even stopped playing games on FB & Zynga ...
For this flash player problem I even took it to acer service center and since I have extended service warranty the engineers there ran acomplete check on ram, hdd, graphic card and they also did a complete fresh install of win 7 home premium 64 bit edition. They even completely serviced it, cleaned it and applied new thermal paste ... but even they were baffled that my system can stand up to high intensity graphic games running from HDD or DVD rom or USB pen drive but if I try to run graphic flash player games for long ie castleville or watch a long movie on you tube then flash player can single handedly cause CPU usage to be constantly high leading to system getting heated up.
Guess will just have to be content without flash ... but some sites require flash player to be enabled and therein lies the problem
rgds

Why are there two graphics cards listed in system information?

I have a MacBook Pro 5,1 2.53 Ghz. I am using Photoshop which brings the machine to a standstill, or so it seems. I looked in system information and discovered that there are two different nvidia GEFORCE graphics adapters listed...one 9400 and one 9600. Is there a way to select the 9600 which shows 512 mb or video ram versus the 9400 which only shows 256 mb? I am hoping that the extra video memory will improve performance. Or is this 9600 connected only to the video output and not to the built in screen?
Thanks for your assistance in advance!

Thanks very much Niel!
I guess I knew about that setting, but did not realize it actually changed the graphics card that was selected! Already seems to be better after logging back in on the MBP!
Shawn

Fan error on T42...

FAN ERROR message on T42 (model 2373)
is there a way to clean the fan?
the problem is intermittent

well you can try to clean the fan, just take off the keyboard. And then use a can of compressed air to blow out the dusts (but make sure you hold down the fan vane).
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

SAP system copy error

Hi Experts,
I am currently facing an issue/error while doing a homogeneous system copy with SAP NW 7.4 (SAP ERP 6.0 Ehp7) servers. Both source and target systems are test/demo servers and system copy procedure needs to be established as a part of implementation.
      An error occurred while processing option SAP Business Suite 7i 2013 Support Release 1 > EHP7 for SAP ERP 6.0 ABAP Support Release 1 > SAP ASE > System Copy > Target System > Standard System > Based on AS ABAP > Database Refresh or Move( Last error reported by the step: Assertion failed: Unable to load database RD3. Refer to trace file sapinst_dev.log for further information.)
Sybase ASE version = 15.7_122
sapinst_dev log file description -
Error description (sapinst_dev log file) –
Execution of the command "isql64 -e -w999 -Usa -SSAP-PROD-TEST:4901 -X" finished with return code 0. Output:
Password:
1> use master
1> load database RD3
2> from 'F:/Backup_RD1_04042015/rd1_s1.dmp' stripe on 'F:/Backup_RD1_04042015/rd1_s2.dmp' stripe on 'F:/Backup_RD1_04042015/rd1_s3.dmp'
Backup Server session id is: 33. Use this value when executing the 'sp_volchanged' system stored procedure after fulfilling any volume change request from the Backup Server.
Backup Server: 6.28.1.1: Dumpfile name 'RD11509409BE6    ' section number 1 mounted on disk file 'F:/Backup_RD1_04042015/rd1_s3.dmp'
Backup Server: 6.28.1.1: Dumpfile name 'RD11509409BE6    ' section number 1 mounted on disk file 'F:/Backup_RD1_04042015/rd1_s1.dmp'
Backup Server: 6.28.1.1: Dumpfile name 'RD11509409BE6    ' section number 1 mounted on disk file 'F:/Backup_RD1_04042015/rd1_s2.dmp'
Msg 3105, Level 16, State 4:
Server 'RD3', Line 1:
Data on dump will not fit into current database. Need 101376 Mbyte database.
1> online database RD3
Msg 930, Level 14, State 1:
Server 'RD3', Line 1:
Database 'RD3' cannot be opened because either an earlier system termination left LOAD DATABASE incomplete or the database is created with 'for load' option. Load the database or contact a user with System Administrator (SA) role.
No matter how much I try to execute the commands for loading database (LOAD DATABASE & ALTER DATABASE commands), i's not working. I have already added the size mentioned above. Although it still didnt work the size of the DB grew by 99GB (displayed in the incresed size of F: drive in Windows.server 2012 r2 OS level.
Any help leading to closure of this error is highly appreciated. I have attached all necessary screenshots for your kind reference.
Thanks and regards,
M. Nizam

Hi Nizamuddin,
Message text
Data on dump will not fit into current database. Need %d Mbyte database.
Explanation
This error occurs when an attempt is made to load a database dump into a database smaller than the dumped database. You cannot use dump database or load database to shrink a database, regardless of the amount of actual data in the database.
Action
If your goal is to load the database from the dump, you must increase the size of the database being loaded into to at least the configured size of the dumped database. You can do this with either the alter database command or by dropping and re-creating a larger database.
If your goal is to shrink the total size of a database, you cannot use dump and load. You must copy all the data out of the database using bcp, drop the database and re-create a smaller database, then re-create the database structure with scripts, and reload the data with bcp.
extend your current master *database* on the master *device* to a total size of 101376MB(or more) (use 'alter database' command)
alter database master on master = <size in MB>
If there isn't enough room on the master device AND the master device is either a file system device in a file system that has free space or was created on a raw partition that is actually larger than the master device was defined, then you can use the DISK RESIZE command to enlarge the master device
disk resize name = "master", size = <additional space in MB>
Regards,
V Srinivasan

Error in codepage mapping for source system. Error

Hi BW Experts,
I am facing following error:
Error message: Error in codepage mapping for source system. Error text:
Details: Inbound Processing ( 1000 Records ) : Errors occurred
Error in codepage mapping for source system. Error text:
Update PSA ( 0 Records posted ) : Missing messages
I repeated the delta working and everything fine.
Does anybody know why this error occurs?

Run rsa13 (for bi 7.0) find your source system which one you are using for data transfer and double click on it and find special options there select the optioned i mentioned already.
Please search SDN you can fin threads related to this thread
if not let me know.
Regards.

Integration Gateway External System Contact Error

Hi,
I have to use Integration Broker to Build an inbound interface and to integrate Inventory with Third Party system. It is an ASynchronous Service Operation.
I am using the PSFT_EP as local node for Peoplesoft and I have created an External node and used the HTTPTARGET as the connector for that external
But the ping node is failed for the external node. The error is Integration Gateway External System Contact Error 158,10721. When I copy the URL present in the HTTPTARGET connector and open it in the new tab. The message I am getting is "ACTIVE"
Edited by: 1010088 on Jun 5, 2013 3:00 PM

Please review following notes on MOS:
E-IB:Unable to ping node external server External System Contact Error [ID 637183.1]
https://support.oracle.com/epmos/faces/DocContentDisplay?id=637183.1
Integration Broker: Cannot ping external node [ID 622030.1]
https://support.oracle.com/epmos/faces/DocContentDisplay?id=622030.1

Both time machine drive and startup disk can't be repaired by disk utilities and needs to be formatted!!??

ok so i accidentally remove the USB while my laptop was backing up to the time machine partition on my external HDD. I plug it in again, and no time machine partition. just the other part (fat 32 partition). so i open disk utilities.. the partition is there but grayed out. so I repair it.. and it says it cant repair it i need to back it up and format it. ok great.. i tried to do that and it said it can't access the disk.. super.
any way.. i don't know why i decided to check my other drives and see how they're doing.. and it turns out.. my startup disk has problems.. and you guessed it.. it can not be repaired:D so i restart in recovery mode.. did it again.. and? it can't be repaired.. i need to backup the drive and format it... (like the same problem with the time machine partition) just great! so i restart the laptop.. it safe boots.. I dnno why.. and everything is like it was.. I mean I don't see a problem with my drive.. i can do everything but that "cant repair" thing is scaring me.. what should I do? just leave it? or brace myself for a possible HDD death? I DON'T EVEN HAVE A BACKUP)
help me i feel vulnerable

As you have indicated, you don’t want to touch the partitions on your existing external drive because it has live files in the FAT32 partition for which there are no copies anywhere else. That leaves you with two sets of data that are currently not backed up: your FAT32 partition and your system drive. I suggest you need at least one more external HD for backups.
A “backup” drive should never have live files on it because should that drive fail all the live files on it would be lost. So you need a second external HD anyway for a proper backup scheme.
I would partition a new disk as you have the current one and then copy all the FAT32 files form the old disk to the new one. Then you can try repartitioning the old drive. I would then setup a backup scheme to periodically clone the new FAT32 drive onto the old FAT32 one, using the new disk for your live FAT32 files and dedicating the old disk to backups. You could also continue using the old disk for Time Machine backups.
You can use Mac cloning software such as Carbon Copy Cloner to maintain the cloned backup copy of your FAT32 data.
http://help.bombich.com/kb/usage-scenarios/backing-up-tofrom-network-volumes-and -other-non-hfs-volumes

System fan error on g62-352ca on startup. are there two fans ie a cpu fan and a system fan?

Similar Messages

Maybe you are looking for