System Fan Not monitor and working
Hello,
I have the 875 Neo version 1.0 with Bios 2.2
I have a Thermaltake Tsunami case and the 120mm fans are really noisy so i wanted to connect a small Thermaltake Fan Speed Controller and when i try to change the speed nothing happend even in CoreCenter, the System Fan is not seen (i see 0).
In the Bios no option availbale to enable or disable that can someone help Me ?????
Pentium IV 3.2C Ghz 800Mhz
Ventilateur CPU Zalman CNPS-7000A-AlCu
CM MSI 875P Neo-FISR PCB 1.0 Bios 2.2
1Gb [2x256MB DDR-400 PC3200 Infineon] + [2x256MB DDR-400 PC3200 Kingston]
DD WD 40 Gb 7200RPM 2Mb
DD Maxtor 120 Gb 7200RPM 8Mb
Club 3D Radeon 9700
Graveur Samsung SW-216B
Graveur DVD Nu-Tech DDW-081
Moniteur Philips 190S5FS 19"
Boitier Thermaltake Tsunami Black
Souris Logitech MX500
Clavier Logitech Internet Navigator SE
Alimentation Tagan TG380-U01
Windows XP Home SP2
Direct X 9.0c
Connection : Cable 4Mb/512Kb
Similar Messages
-
I just recently installed mountain lion and an update for SMC firmware to install power nap. Everything is working except for the menu bar, the icons native to the system do not respond, and features like the clock and battery meter freeze.
When I mouse over the icons, the rainbow appears as if it was processing something. The problem is eliminated when I restart my computer but it comes back after a while.
I guess I cant make a backup copy and restore the whole disk because the copy would be made with this error.
Can anyone help me? Anyone with the same issue?Update: I was able to test out the HDMI adapter as well and the same issue occured. I'm stumped. 10.8.1 maybe.
-
HP pavillion Elite HPE-541F ... system will not start and monitor keeps going into sleep mode
Good Morning:
Having an issue with my Hp Pavilion Elite HPE-541F and Monitor HP2311x
Yesterday, thinking I was updating Java ... clicked on it and agreed to things being allowed on computer ... started adding icons to my desktop .... then pop ups kept coming up to register etc ... I assumed that something was wrong so I attempted to restore system to previous ... since then my system will not boot up ... will say "starting windows" and I can hear the fans working but thats it ... second part of the issue is that the monitor keeps going to sleep, so even if I try to restart the computer in "safe" mode or anything else monitor goes to sleep and there's nothing on the screen so don't know if anything is doing anything .... Very sorry I'm also not very tech savy with computers ... just trying to save time and money before I have to bring system to computer repair person .... Any help would be appreciated .... Thanks so very muchI am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at
http://h30499.www3.hp.com/t5/Business-PCs-Compaq-Elite-Pro/bd-p/bsc-271
and for the monitor:
http://h30499.www3.hp.com/t5/Monitors-Experts-Online-Now/bd-p/bsc-1255
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping! -
Hi All
I have put mac os update from 10.9 to 10.9.5 from mac app store. Update wants restart and I do that. First it shows installing updates on monitor and then after waiting for more than 30 minutes, it did not restart. On monitor it shows no signal now. I have checked all the connections. Mac mini LED light is showing blue color and i think its signalled the ON mode. Also mouse lights are on. Please provide help, as I need to solve it asap.
ThanksBoot to recovery and first try repairing the startup disk via dis utility.
Next reinstall the OS via Recovery
OS X: About OS X Recovery -
My ASA5540 8.2.4(4) can not monitor and failover on certain interfaces
the story is
we configure the
monitor interface inside
monitor interface outside
monitor interface partner
and save configue
but when i show run monitor-interface
the configure do not show the 3 montitor interfaces, it only show other monitor interfaces,which can failover , but not the above 3 interfaces, however they are all showed interface monitor in the ASDM configure
here is the show version
==================================
Cisco Adaptive Security Appliance Software Version 8.2(4)4
Device Manager Version 6.4(5)
Compiled on Thu 03-Mar-11 17:18 by builders
System image file is "disk0:/asa824-4-k8.bin"
Config file at boot was "startup-config"
dcm-lidc-fw1 up 9 days 18 hours
failover cluster up 16 days 20 hours
Hardware: ASA5540, 2048 MB RAM, CPU Pentium 4 2000 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash Firmware Hub @ 0xffe00000, 1024KB
Encryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)
Boot microcode : CN1000-MC-BOOT-2.00
SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
IPSec microcode : CNlite-MC-IPSECm-MAIN-2.05
0: Ext: GigabitEthernet0/0 : address is 30e4.db7b.6f82, irq 9
1: Ext: GigabitEthernet0/1 : address is 30e4.db7b.6f83, irq 9
2: Ext: GigabitEthernet0/2 : address is 30e4.db7b.6f84, irq 9
3: Ext: GigabitEthernet0/3 : address is 30e4.db7b.6f85, irq 9
4: Ext: Management0/0 : address is 30e4.db7b.6f86, irq 11
5: Int: Internal-Data0/0 : address is 0000.0001.0002, irq 11
6: Int: Not used : irq 5
7: Ext: GigabitEthernet1/0 : address is 30e4.db02.1f96, irq 255
8: Ext: GigabitEthernet1/1 : address is 30e4.db02.1f97, irq 255
9: Ext: GigabitEthernet1/2 : address is 30e4.db02.1f98, irq 255
10: Ext: GigabitEthernet1/3 : address is 30e4.db02.1f99, irq 255
11: Int: Internal-Data1/0 : address is 0000.0003.0002, irq 255
Licensed features for this platform:
Maximum Physical Interfaces : Unlimited
Maximum VLANs : 200
Inside Hosts : Unlimited
Failover : Active/Active
VPN-DES : Enabled
VPN-3DES-AES : Enabled
Security Contexts : 2
GTP/GPRS : Disabled
SSL VPN Peers : 2
Total VPN Peers : 5000
Shared License : Disabled
AnyConnect for Mobile : Disabled
AnyConnect for Cisco VPN Phone : Disabled
AnyConnect Essentials : Enabled
Advanced Endpoint Assessment : Disabled
UC Phone Proxy Sessions : 2
Total UC Proxy Sessions : 2
Botnet Traffic Filter : Disabled
This platform has an ASA 5540 VPN Premium license.
==========here is the show monitor interface, it does not show outside/inside/partner====================
-fw1# sh run monitor-interface
monitor-interface app
monitor-interface dmz
monitor-interface data
monitor-interface dev-app
monitor-interface dev-data
no monitor-interface management
-fw1#
-fw1(config)# sh run all | in monitor
banner motd * This is a private and monitored system. *
monitor-interface app
monitor-interface dmz
monitor-interface data
monitor-interface dev-app
monitor-interface dev-data
no monitor-interface management
===============failover test =============
- unplug the outside interface cable on primary , led go off, but failover does not happen-
- upplug the cable on inside, or parner , it still do not failover
- only unplug the cable on other monitor interface , it failover.
=======clear config monitor-interface, and enter monitor-interface command for all the interface, re test, again, same result=======fw1# sh failover
Failover On
Failover unit Secondary
Failover LAN Interface: failover GigabitEthernet1/3 (up)
Unit Poll frequency 1 seconds, holdtime 15 seconds
Interface Poll frequency 5 seconds, holdtime 25 seconds
Interface Policy 1
Monitored Interfaces 8 of 210 maximum
Version: Ours 8.2(4)4, Mate 8.2(4)4
Last Failover at: 15:44:00 EST Nov 24 2011
This host: Secondary - Standby Ready
Active time: 767625 (sec)
slot 0: ASA5540 hw/sw rev (2.0/8.2(4)4) status (Up Sys)
Interface outside (209.202.65.132): Normal
Interface inside (10.100.161.2): Normal
Interface app (10.100.171.2): Normal
Interface dmz (10.100.172.2): Normal
Interface data (10.100.173.2): Normal
Interface dev-app (10.100.174.2): Normal
Interface dev-data (10.100.175.2): Normal
Interface management (10.7.4.9): Failed (Not-Monitored)
Interface partner (10.100.160.14): Normal
slot 1: ASA-SSM-4GE hw/sw rev (1.0/1.0(0)10) status (Up)
Other host: Primary - Active
Active time: 77823 (sec)
slot 0: ASA5540 hw/sw rev (2.0/8.2(4)4) status (Up Sys)
Interface outside (209.202.65.131): Normal
Interface inside (10.100.161.1): Normal
Interface app (10.100.171.1): Normal
Interface dmz (10.100.172.1): Normal
Interface data (10.100.173.1): Normal
Interface dev-app (10.100.174.1): Normal
Interface dev-data (10.100.175.1): Normal
Interface management (10.7.4.8): Normal (Not-Monitored)
Interface partner (10.100.160.13): Normal
slot 1: ASA-SSM-4GE hw/sw rev (1.0/1.0(0)10) status (Up)
Stateful Failover Logical Update Statistics
Link : failover GigabitEthernet1/3 (up)
Stateful Obj xmit xerr rcv rerr
General 1001073 0 443701 25
sys cmd 194284 0 194283 0
up time 0 0 0 0
RPC services 0 0 0 0
TCP conn 262196 0 45389 2
UDP conn 342196 0 47480 3
ARP tbl 202397 0 156529 20
Xlate_Timeout 0 0 0 0
IPv6 ND tbl 0 0 0 0
VPN IKE upd 0 0 10 0 -
I Have a mid 2011 iMac with windows 8.1 on it and constantly get system thread exception not handled and kernel security check failur
I Have a mid 2011 iMac with windows 8.1 on it and constantly get system thread exception not handled and kernel security check failur
-
How can I run Photoshop Elements4 with Windows7. The operating system will not open and run it.
My New computer has windows 7 installed, and it will not open and run my photoshop elements 4 programme. Do I need an upgrade, or can it be run in any other format on this computer.
Did it install and you're just getting errors trying to run it? If so, try clicking on your Start button. Then, go to All Programs, find the entry for Adobe Photoshop Elements 4 and "right click" on it. Select Properties, and in the Properties dialogue click the Compatibility Tab and try running it in XP Compatibility mode and see if it works that way.
If not, then it is really not compatible. Just buy the latest (Photoshop Elelments 9) while they offer $40 mail-in rebate (Ends January 5, 2011)
http://www.adobe.com/products/photoshopel/ -
System fan not working properly
i have a hp 15 notebook 15-r004ne laptop and when i turn it on, it states the fan is not working correctly, then shuts down after 15 seconds or continues to windows if you press enter. I dont know what to do now please i need help .
Answers will be appriciated.
Thank You.The fan may simply be clogged with dust, pet hair,etc. Pick up a can of compressed air and use it to blow out all vents really well.
If the problem continues try a hard reset.Disconnect all external devices first.
1-remove power cord and battery
2-press power button for 30 seconds
3-reinstall only power cord for first startup.
4-power on
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
Touchpad not recongnized and working as mouse
Hello,
I don't have a physical mouse on my dell m4600 laptop, just using the touchpad. It works, but works as a mouse. So i can't do any two finger scrolling etc, and in Mouse & Touchpad system settings there's only a mouse tab.
xinput list
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ PS/2 Generic Mouse id=12 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Video Bus id=7 [slave keyboard (3)]
↳ Power Button id=8 [slave keyboard (3)]
↳ Sleep Button id=9 [slave keyboard (3)]
↳ Laptop_Integrated_Webcam_FHD id=10 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=11 [slave keyboard (3)]
↳ Dell WMI hotkeys id=13 [slave keyboard (3)]
i've installed xf86-input-synaptics and here's the 10-synaptics.conf
Section "InputClass"
Identifier "touchpad catchall"
Driver "synaptics"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
EndSection
Xorg.0.log
[ 11.582]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 11.582]
X.Org X Server 1.10.3.901 (1.10.4 RC 1)
Release Date: 2011-07-29
[ 11.582] X Protocol Version 11, Revision 0
[ 11.582] Build Operating System: Linux 3.0.0-ARCH x86_64
[ 11.582] Current Operating System: Linux precision 3.0-ARCH #1 SMP PREEMPT Wed Aug 17 21:55:57 CEST 2011 x86_64
[ 11.582] Kernel command line: root=/dev/sda6 ro
[ 11.582] Build Date: 08 August 2011 08:24:13AM
[ 11.582]
[ 11.582] Current version of pixman: 0.22.2
[ 11.582] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 11.582] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 11.582] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Aug 31 10:05:33 2011
[ 11.584] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 11.586] (==) No Layout section. Using the first Screen section.
[ 11.586] (==) No screen section available. Using defaults.
[ 11.586] (**) |-->Screen "Default Screen Section" (0)
[ 11.586] (**) | |-->Monitor "<default monitor>"
[ 11.586] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 11.586] (==) Automatically adding devices
[ 11.586] (==) Automatically enabling devices
[ 11.588] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 11.588] Entry deleted from font path.
[ 11.589] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 11.589] Entry deleted from font path.
[ 11.589] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 11.589] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 11.589] Entry deleted from font path.
[ 11.589] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 11.589] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 11.589] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 11.589] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 11.589] (II) Loader magic: 0x7d3620
[ 11.589] (II) Module ABI versions:
[ 11.589] X.Org ANSI C Emulation: 0.4
[ 11.589] X.Org Video Driver: 10.0
[ 11.589] X.Org XInput driver : 12.2
[ 11.589] X.Org Server Extension : 5.0
[ 11.590] (--) PCI:*(0:1:0:0) 1002:6740:1028:04a3 rev 0, Mem @ 0xd0000000/268435456, 0xe3820000/131072, I/O @ 0x00007000/256, BIOS @ 0x????????/131072
[ 11.590] (II) Open ACPI successful (/var/run/acpid.socket)
[ 11.590] (II) LoadModule: "extmod"
[ 11.593] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 11.595] (II) Module extmod: vendor="X.Org Foundation"
[ 11.595] compiled for 1.10.3.901, module version = 1.0.0
[ 11.595] Module class: X.Org Server Extension
[ 11.595] ABI class: X.Org Server Extension, version 5.0
[ 11.595] (II) Loading extension MIT-SCREEN-SAVER
[ 11.595] (II) Loading extension XFree86-VidModeExtension
[ 11.595] (II) Loading extension XFree86-DGA
[ 11.595] (II) Loading extension DPMS
[ 11.595] (II) Loading extension XVideo
[ 11.595] (II) Loading extension XVideo-MotionCompensation
[ 11.595] (II) Loading extension X-Resource
[ 11.595] (II) LoadModule: "dbe"
[ 11.595] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 11.596] (II) Module dbe: vendor="X.Org Foundation"
[ 11.596] compiled for 1.10.3.901, module version = 1.0.0
[ 11.596] Module class: X.Org Server Extension
[ 11.596] ABI class: X.Org Server Extension, version 5.0
[ 11.596] (II) Loading extension DOUBLE-BUFFER
[ 11.596] (II) LoadModule: "glx"
[ 11.596] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 11.599] (II) Module glx: vendor="X.Org Foundation"
[ 11.599] compiled for 1.10.3.901, module version = 1.0.0
[ 11.599] ABI class: X.Org Server Extension, version 5.0
[ 11.599] (==) AIGLX enabled
[ 11.599] (II) Loading extension GLX
[ 11.600] (II) LoadModule: "record"
[ 11.600] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 11.601] (II) Module record: vendor="X.Org Foundation"
[ 11.601] compiled for 1.10.3.901, module version = 1.13.0
[ 11.601] Module class: X.Org Server Extension
[ 11.601] ABI class: X.Org Server Extension, version 5.0
[ 11.601] (II) Loading extension RECORD
[ 11.601] (II) LoadModule: "dri"
[ 11.601] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 11.603] (II) Module dri: vendor="X.Org Foundation"
[ 11.603] compiled for 1.10.3.901, module version = 1.0.0
[ 11.603] ABI class: X.Org Server Extension, version 5.0
[ 11.603] (II) Loading extension XFree86-DRI
[ 11.603] (II) LoadModule: "dri2"
[ 11.603] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 11.604] (II) Module dri2: vendor="X.Org Foundation"
[ 11.604] compiled for 1.10.3.901, module version = 1.2.0
[ 11.604] ABI class: X.Org Server Extension, version 5.0
[ 11.604] (II) Loading extension DRI2
[ 11.604] (==) Matched ati as autoconfigured driver 0
[ 11.604] (==) Matched vesa as autoconfigured driver 1
[ 11.604] (==) Matched fbdev as autoconfigured driver 2
[ 11.604] (==) Assigned the driver to the xf86ConfigLayout
[ 11.604] (II) LoadModule: "ati"
[ 11.604] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 11.605] (II) Module ati: vendor="X.Org Foundation"
[ 11.605] compiled for 1.10.1, module version = 6.14.2
[ 11.605] Module class: X.Org Video Driver
[ 11.605] ABI class: X.Org Video Driver, version 10.0
[ 11.605] (II) LoadModule: "radeon"
[ 11.605] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 11.610] (II) Module radeon: vendor="X.Org Foundation"
[ 11.610] compiled for 1.10.1, module version = 6.14.2
[ 11.610] Module class: X.Org Video Driver
[ 11.610] ABI class: X.Org Video Driver, version 10.0
[ 11.611] (II) LoadModule: "vesa"
[ 11.612] (WW) Warning, couldn't open module vesa
[ 11.612] (II) UnloadModule: "vesa"
[ 11.612] (II) Unloading vesa
[ 11.612] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 11.612] (II) LoadModule: "fbdev"
[ 11.612] (WW) Warning, couldn't open module fbdev
[ 11.612] (II) UnloadModule: "fbdev"
[ 11.612] (II) Unloading fbdev
[ 11.612] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 11.612] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, ATI Radeon HD 4200, ATI Radeon 4100,
ATI Mobility Radeon HD 4200, ATI Mobility Radeon 4100,
ATI Radeon HD 4290, ATI Radeon HD 4250, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, AMD Radeon HD 6900 Series,
AMD Radeon HD 6900 Series, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS
[ 11.619] (++) using VT number 7
[ 11.622] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 11.622] (II) [KMS] Kernel modesetting enabled.
[ 11.623] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 11.623] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 11.623] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 11.623] (==) RADEON(0): Default visual is TrueColor
[ 11.623] (==) RADEON(0): RGB weight 888
[ 11.623] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 11.623] (--) RADEON(0): Chipset: "TURKS" (ChipID = 0x6740)
[ 11.623] (II) RADEON(0): PCIE card detected
[ 11.623] drmOpenDevice: node name is /dev/dri/card0
[ 11.623] drmOpenDevice: open result is 9, (OK)
[ 11.623] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 11.623] drmOpenDevice: node name is /dev/dri/card0
[ 11.623] drmOpenDevice: open result is 9, (OK)
[ 11.623] drmOpenByBusid: drmOpenMinor returns 9
[ 11.623] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 11.623] (II) Loading sub module "exa"
[ 11.623] (II) LoadModule: "exa"
[ 11.623] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 11.624] (II) Module exa: vendor="X.Org Foundation"
[ 11.624] compiled for 1.10.3.901, module version = 2.5.0
[ 11.624] ABI class: X.Org Video Driver, version 10.0
[ 11.625] (II) RADEON(0): KMS Color Tiling: disabled
[ 11.625] (II) RADEON(0): KMS Pageflipping: enabled
[ 11.625] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 11.625] (II) RADEON(0): Output LVDS has no monitor section
[ 11.636] (II) RADEON(0): Output DisplayPort-0 has no monitor section
[ 11.650] (II) RADEON(0): Output DisplayPort-1 has no monitor section
[ 11.663] (II) RADEON(0): Output DisplayPort-2 has no monitor section
[ 11.683] (II) RADEON(0): Output VGA-0 has no monitor section
[ 11.684] (II) RADEON(0): EDID for output LVDS
[ 11.684] (II) RADEON(0): Manufacturer: LGD Model: 2d9 Serial#: 0
[ 11.684] (II) RADEON(0): Year: 2010 Week: 0
[ 11.684] (II) RADEON(0): EDID Version: 1.4
[ 11.684] (II) RADEON(0): Digital Display Input
[ 11.684] (II) RADEON(0): 6 bits per channel
[ 11.684] (II) RADEON(0): Digital interface is undefined
[ 11.684] (II) RADEON(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 11.684] (II) RADEON(0): Gamma: 2.20
[ 11.684] (II) RADEON(0): No DPMS capabilities specified
[ 11.684] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 11.684] (II) RADEON(0): First detailed timing is preferred mode
[ 11.684] (II) RADEON(0): Preferred mode is native pixel format and refresh rate
[ 11.684] (II) RADEON(0): redX: 0.617 redY: 0.349 greenX: 0.313 greenY: 0.595
[ 11.684] (II) RADEON(0): blueX: 0.151 blueY: 0.056 whiteX: 0.313 whiteY: 0.329
[ 11.684] (II) RADEON(0): Manufacturer's mask: 0
[ 11.684] (II) RADEON(0): Supported detailed timing:
[ 11.684] (II) RADEON(0): clock: 139.5 MHz Image Size: 344 x 194 mm
[ 11.684] (II) RADEON(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2096 h_border: 0
[ 11.684] (II) RADEON(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
[ 11.684] (II) RADEON(0): Supported detailed timing:
[ 11.684] (II) RADEON(0): clock: 93.0 MHz Image Size: 344 x 194 mm
[ 11.684] (II) RADEON(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2096 h_border: 0
[ 11.684] (II) RADEON(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
[ 11.684] (II) RADEON(0): MC6JN156WF1
[ 11.684] (II) RADEON(0): Unknown vendor-specific block 0
[ 11.684] (II) RADEON(0): EDID (in hex):
[ 11.684] (II) RADEON(0): 00ffffffffffff0030e4d90200000000
[ 11.684] (II) RADEON(0): 00140104902213780a15d59e59509826
[ 11.684] (II) RADEON(0): 0e505400000001010101010101010101
[ 11.684] (II) RADEON(0): 0101010101017e3680b070381f403020
[ 11.684] (II) RADEON(0): 350058c210000018542480b070381f40
[ 11.684] (II) RADEON(0): 3020350058c210000018000000fe004d
[ 11.684] (II) RADEON(0): 43364a4e813135365746310a00000000
[ 11.684] (II) RADEON(0): 000041319e0000000002010a20200030
[ 11.684] (II) RADEON(0): EDID vendor "LGD", prod id 729
[ 11.685] (II) RADEON(0): Printing DDC gathered Modelines:
[ 11.685] (II) RADEON(0): Modeline "1920x1080"x0.0 139.50 1920 1968 2000 2096 1080 1083 1088 1111 -hsync -vsync (66.6 kHz)
[ 11.685] (II) RADEON(0): Modeline "1920x1080"x0.0 93.00 1920 1968 2000 2096 1080 1083 1088 1111 -hsync -vsync (44.4 kHz)
[ 11.685] (II) RADEON(0): Printing probed modes for output LVDS
[ 11.685] (II) RADEON(0): Modeline "1920x1080"x59.9 139.50 1920 1968 2000 2096 1080 1083 1088 1111 -hsync -vsync (66.6 kHz)
[ 11.685] (II) RADEON(0): Modeline "1920x1080"x39.9 93.00 1920 1968 2000 2096 1080 1083 1088 1111 -hsync -vsync (44.4 kHz)
[ 11.685] (II) RADEON(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 11.685] (II) RADEON(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz)
[ 11.685] (II) RADEON(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
[ 11.685] (II) RADEON(0): Modeline "1440x900"x59.9 106.50 1440 1528 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 11.685] (II) RADEON(0): Modeline "1280x960"x59.9 101.25 1280 1360 1488 1696 960 963 967 996 -hsync +vsync (59.7 kHz)
[ 11.685] (II) RADEON(0): Modeline "1280x854"x59.9 89.25 1280 1352 1480 1680 854 857 867 887 -hsync +vsync (53.1 kHz)
[ 11.685] (II) RADEON(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 11.685] (II) RADEON(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz)
[ 11.685] (II) RADEON(0): Modeline "1152x768"x59.8 71.75 1152 1216 1328 1504 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 11.685] (II) RADEON(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 11.685] (II) RADEON(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 11.685] (II) RADEON(0): Modeline "848x480"x59.7 31.50 848 872 952 1056 480 483 493 500 -hsync +vsync (29.8 kHz)
[ 11.685] (II) RADEON(0): Modeline "720x480"x59.7 26.75 720 744 808 896 480 483 493 500 -hsync +vsync (29.9 kHz)
[ 11.685] (II) RADEON(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
[ 11.696] (II) RADEON(0): EDID for output DisplayPort-0
[ 11.710] (II) RADEON(0): EDID for output DisplayPort-1
[ 11.723] (II) RADEON(0): EDID for output DisplayPort-2
[ 11.743] (II) RADEON(0): EDID for output VGA-0
[ 11.743] (II) RADEON(0): Output LVDS connected
[ 11.743] (II) RADEON(0): Output DisplayPort-0 disconnected
[ 11.743] (II) RADEON(0): Output DisplayPort-1 disconnected
[ 11.743] (II) RADEON(0): Output DisplayPort-2 disconnected
[ 11.743] (II) RADEON(0): Output VGA-0 disconnected
[ 11.743] (II) RADEON(0): Using exact sizes for initial modes
[ 11.743] (II) RADEON(0): Output LVDS using initial mode 1920x1080
[ 11.743] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 11.743] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:40000000 visible:f7d7000
[ 11.743] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 11.743] (**) RADEON(0): Display dimensions: (340, 190) mm
[ 11.743] (**) RADEON(0): DPI set to (143, 144)
[ 11.743] (II) Loading sub module "fb"
[ 11.743] (II) LoadModule: "fb"
[ 11.743] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 11.745] (II) Module fb: vendor="X.Org Foundation"
[ 11.745] compiled for 1.10.3.901, module version = 1.0.0
[ 11.745] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11.745] (II) Loading sub module "ramdac"
[ 11.745] (II) LoadModule: "ramdac"
[ 11.745] (II) Module "ramdac" already built-in
[ 11.745] (--) Depth 24 pixmap format is 32 bpp
[ 11.745] (II) RADEON(0): [DRI2] Setup complete
[ 11.745] (II) RADEON(0): [DRI2] DRI driver: r600
[ 11.745] (II) RADEON(0): Front buffer size: 8100K
[ 11.746] (II) RADEON(0): VRAM usage limit set to 221119K
[ 11.748] (==) RADEON(0): Backing store disabled
[ 11.748] (II) RADEON(0): Direct rendering enabled
[ 11.749] (II) RADEON(0): Setting EXA maxPitchBytes
[ 11.749] (II) EXA(0): Driver allocated offscreen pixmaps
[ 11.749] (II) EXA(0): Driver registered support for the following operations:
[ 11.749] (II) Solid
[ 11.749] (II) Copy
[ 11.749] (II) Composite (RENDER acceleration)
[ 11.749] (II) UploadToScreen
[ 11.749] (II) DownloadFromScreen
[ 11.749] (II) RADEON(0): Acceleration enabled
[ 11.749] (==) RADEON(0): DPMS enabled
[ 11.749] (==) RADEON(0): Silken mouse enabled
[ 11.751] (II) RADEON(0): Set up textured video
[ 11.751] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 11.751] (--) RandR disabled
[ 11.751] (II) Initializing built-in extension Generic Event Extension
[ 11.751] (II) Initializing built-in extension SHAPE
[ 11.751] (II) Initializing built-in extension MIT-SHM
[ 11.751] (II) Initializing built-in extension XInputExtension
[ 11.751] (II) Initializing built-in extension XTEST
[ 11.751] (II) Initializing built-in extension BIG-REQUESTS
[ 11.751] (II) Initializing built-in extension SYNC
[ 11.751] (II) Initializing built-in extension XKEYBOARD
[ 11.751] (II) Initializing built-in extension XC-MISC
[ 11.751] (II) Initializing built-in extension SECURITY
[ 11.751] (II) Initializing built-in extension XINERAMA
[ 11.751] (II) Initializing built-in extension XFIXES
[ 11.751] (II) Initializing built-in extension RENDER
[ 11.751] (II) Initializing built-in extension RANDR
[ 11.751] (II) Initializing built-in extension COMPOSITE
[ 11.751] (II) Initializing built-in extension DAMAGE
[ 11.810] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 11.810] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 11.810] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 11.810] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 11.810] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 11.811] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r600_dri.so
[ 11.811] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 11.813] (II) RADEON(0): Setting screen physical size to 508 x 285
[ 11.896] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 11.896] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 11.896] (II) LoadModule: "evdev"
[ 11.896] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 11.897] (II) Module evdev: vendor="X.Org Foundation"
[ 11.897] compiled for 1.10.0, module version = 2.6.0
[ 11.897] Module class: X.Org XInput Driver
[ 11.897] ABI class: X.Org XInput driver, version 12.2
[ 11.897] (II) Using input driver 'evdev' for 'Power Button'
[ 11.897] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 11.897] (**) Power Button: always reports core events
[ 11.897] (**) Power Button: Device: "/dev/input/event4"
[ 11.897] (--) Power Button: Found keys
[ 11.897] (II) Power Button: Configuring as keyboard
[ 11.897] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 11.897] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 11.897] (**) Option "xkb_rules" "evdev"
[ 11.897] (**) Option "xkb_model" "evdev"
[ 11.897] (**) Option "xkb_layout" "gb"
[ 11.934] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[ 11.934] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 11.934] (II) Using input driver 'evdev' for 'Video Bus'
[ 11.934] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 11.934] (**) Video Bus: always reports core events
[ 11.934] (**) Video Bus: Device: "/dev/input/event13"
[ 11.934] (--) Video Bus: Found keys
[ 11.934] (II) Video Bus: Configuring as keyboard
[ 11.934] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:29/LNXVIDEO:00/input/input13/event13"
[ 11.934] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 11.934] (**) Option "xkb_rules" "evdev"
[ 11.934] (**) Option "xkb_model" "evdev"
[ 11.934] (**) Option "xkb_layout" "gb"
[ 11.935] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 11.935] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 11.935] (II) Using input driver 'evdev' for 'Power Button'
[ 11.935] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 11.935] (**) Power Button: always reports core events
[ 11.935] (**) Power Button: Device: "/dev/input/event2"
[ 11.935] (--) Power Button: Found keys
[ 11.935] (II) Power Button: Configuring as keyboard
[ 11.935] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 11.935] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 11.935] (**) Option "xkb_rules" "evdev"
[ 11.935] (**) Option "xkb_model" "evdev"
[ 11.935] (**) Option "xkb_layout" "gb"
[ 11.935] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 11.935] (II) No input driver/identifier specified (ignoring)
[ 11.935] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 11.935] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 11.935] (II) Using input driver 'evdev' for 'Sleep Button'
[ 11.935] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 11.935] (**) Sleep Button: always reports core events
[ 11.935] (**) Sleep Button: Device: "/dev/input/event3"
[ 11.935] (--) Sleep Button: Found keys
[ 11.935] (II) Sleep Button: Configuring as keyboard
[ 11.935] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[ 11.935] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 11.935] (**) Option "xkb_rules" "evdev"
[ 11.936] (**) Option "xkb_model" "evdev"
[ 11.936] (**) Option "xkb_layout" "gb"
[ 11.937] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP (/dev/input/event14)
[ 11.937] (II) No input driver/identifier specified (ignoring)
[ 11.938] (II) config/udev: Adding input device Laptop_Integrated_Webcam_FHD (/dev/input/event6)
[ 11.938] (**) Laptop_Integrated_Webcam_FHD: Applying InputClass "evdev keyboard catchall"
[ 11.938] (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_FHD'
[ 11.938] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 11.938] (**) Laptop_Integrated_Webcam_FHD: always reports core events
[ 11.938] (**) Laptop_Integrated_Webcam_FHD: Device: "/dev/input/event6"
[ 11.938] (--) Laptop_Integrated_Webcam_FHD: Found keys
[ 11.938] (II) Laptop_Integrated_Webcam_FHD: Configuring as keyboard
[ 11.938] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input6/event6"
[ 11.938] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_FHD" (type: KEYBOARD)
[ 11.939] (**) Option "xkb_rules" "evdev"
[ 11.939] (**) Option "xkb_model" "evdev"
[ 11.939] (**) Option "xkb_layout" "gb"
[ 11.939] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 11.939] (II) No input driver/identifier specified (ignoring)
[ 11.940] (II) config/udev: Adding input device HDA Intel PCH Mic at Ext Left Jack (/dev/input/event10)
[ 11.940] (II) No input driver/identifier specified (ignoring)
[ 11.940] (II) config/udev: Adding input device HDA Intel PCH Line Out at Sep Left Jack (/dev/input/event11)
[ 11.940] (II) No input driver/identifier specified (ignoring)
[ 11.940] (II) config/udev: Adding input device HDA Intel PCH HP Out at Ext Left Jack (/dev/input/event12)
[ 11.940] (II) No input driver/identifier specified (ignoring)
[ 11.941] (II) config/udev: Adding input device HDA Intel PCH Mic at Sep Left Jack (/dev/input/event9)
[ 11.941] (II) No input driver/identifier specified (ignoring)
[ 11.945] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 11.945] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 11.945] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 11.945] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 11.945] (**) AT Translated Set 2 keyboard: always reports core events
[ 11.945] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 11.945] (--) AT Translated Set 2 keyboard: Found keys
[ 11.945] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 11.945] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 11.945] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 11.945] (**) Option "xkb_rules" "evdev"
[ 11.945] (**) Option "xkb_model" "evdev"
[ 11.945] (**) Option "xkb_layout" "gb"
[ 11.946] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event15)
[ 11.946] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
[ 11.946] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
[ 11.946] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 11.946] (**) PS/2 Generic Mouse: always reports core events
[ 11.946] (**) PS/2 Generic Mouse: Device: "/dev/input/event15"
[ 11.946] (--) PS/2 Generic Mouse: Found 3 mouse buttons
[ 11.946] (--) PS/2 Generic Mouse: Found relative axes
[ 11.946] (--) PS/2 Generic Mouse: Found x and y relative axes
[ 11.946] (II) PS/2 Generic Mouse: Configuring as mouse
[ 11.946] (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
[ 11.946] (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 11.946] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input15/event15"
[ 11.946] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
[ 11.946] (II) PS/2 Generic Mouse: initialized for relative axes.
[ 11.946] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
[ 11.946] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
[ 11.946] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[ 11.946] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[ 11.946] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse0)
[ 11.946] (II) No input driver/identifier specified (ignoring)
[ 11.947] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 11.947] (II) No input driver/identifier specified (ignoring)
[ 11.948] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event7)
[ 11.948] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 11.948] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[ 11.948] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 11.948] (**) Dell WMI hotkeys: always reports core events
[ 11.948] (**) Dell WMI hotkeys: Device: "/dev/input/event7"
[ 11.948] (--) Dell WMI hotkeys: Found keys
[ 11.948] (II) Dell WMI hotkeys: Configuring as keyboard
[ 11.948] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event7"
[ 11.948] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD)
[ 11.948] (**) Option "xkb_rules" "evdev"
[ 11.948] (**) Option "xkb_model" "evdev"
[ 11.948] (**) Option "xkb_layout" "gb"
[ 11.964] (II) RADEON(0): EDID vendor "LGD", prod id 729
[ 11.964] (II) RADEON(0): Printing DDC gathered Modelines:
[ 11.964] (II) RADEON(0): Modeline "1920x1080"x0.0 139.50 1920 1968 2000 2096 1080 1083 1088 1111 -hsync -vsync (66.6 kHz)
[ 11.964] (II) RADEON(0): Modeline "1920x1080"x0.0 93.00 1920 1968 2000 2096 1080 1083 1088 1111 -hsync -vsync (44.4 kHz)
[ 12.873] (II) RADEON(0): EDID vendor "LGD", prod id 729
[ 12.873] (II) RADEON(0): Printing DDC gathered Modelines:
[ 12.873] (II) RADEON(0): Modeline "1920x1080"x0.0 139.50 1920 1968 2000 2096 1080 1083 1088 1111 -hsync -vsync (66.6 kHz)
[ 12.873] (II) RADEON(0): Modeline "1920x1080"x0.0 93.00 1920 1968 2000 2096 1080 1083 1088 1111 -hsync -vsync (44.4 kHz)
[ 12.941] (II) RADEON(0): EDID vendor "LGD", prod id 729
[ 12.941] (II) RADEON(0): Printing DDC gathered Modelines:
[ 12.941] (II) RADEON(0): Modeline "1920x1080"x0.0 139.50 1920 1968 2000 2096 1080 1083 1088 1111 -hsync -vsync (66.6 kHz)
[ 12.941] (II) RADEON(0): Modeline "1920x1080"x0.0 93.00 1920 1968 2000 2096 1080 1083 1088 1111 -hsync -vsync (44.4 kHz)
[ 13.004] (II) RADEON(0): EDID vendor "LGD", prod id 729
[ 13.004] (II) RADEON(0): Printing DDC gathered Modelines:
[ 13.004] (II) RADEON(0): Modeline "1920x1080"x0.0 139.50 1920 1968 2000 2096 1080 1083 1088 1111 -hsync -vsync (66.6 kHz)
[ 13.004] (II) RADEON(0): Modeline "1920x1080"x0.0 93.00 1920 1968 2000 2096 1080 1083 1088 1111 -hsync -vsync (44.4 kHz)
[ 13.072] (II) RADEON(0): EDID vendor "LGD", prod id 729
[ 13.072] (II) RADEON(0): Printing DDC gathered Modelines:
[ 13.072] (II) RADEON(0): Modeline "1920x1080"x0.0 139.50 1920 1968 2000 2096 1080 1083 1088 1111 -hsync -vsync (66.6 kHz)
[ 13.072] (II) RADEON(0): Modeline "1920x1080"x0.0 93.00 1920 1968 2000 2096 1080 1083 1088 1111 -hsync -vsync (44.4 kHz)
[ 14.499] (II) RADEON(0): EDID vendor "LGD", prod id 729
[ 14.499] (II) RADEON(0): Printing DDC gathered Modelines:
[ 14.499] (II) RADEON(0): Modeline "1920x1080"x0.0 139.50 1920 1968 2000 2096 1080 1083 1088 1111 -hsync -vsync (66.6 kHz)
[ 14.499] (II) RADEON(0): Modeline "1920x1080"x0.0 93.00 1920 1968 2000 2096 1080 1083 1088 1111 -hsync -vsync (44.4 kHz)
[ 3592.056] (II) RADEON(0): EDID vendor "LGD", prod id 729
[ 3592.056] (II) RADEON(0): Printing DDC gathered Modelines:
[ 3592.056] (II) RADEON(0): Modeline "1920x1080"x0.0 139.50 1920 1968 2000 2096 1080 1083 1088 1111 -hsync -vsync (66.6 kHz)
[ 3592.056] (II) RADEON(0): Modeline "1920x1080"x0.0 93.00 1920 1968 2000 2096 1080 1083 1088 1111 -hsync -vsync (44.4 kHz)
Thanks.Have a look at this thread, you might have the same problem, and installing the AUR package from eworm might give you vertical scrolling.
https://bbs.archlinux.org/viewtopic.php?id=117109 -
HP Envy 15" TouchScreen Power LED shows up, but fans not running and screen does not come on
Hello there!
I am a 1A Software Engineering student at University of Waterloo, and I am running into a very serious problem with my HP Envy 15" TouchSmart laptop running Windows 8.1. This is a problem that just started today, and I would rather get some support from here first before I go see the technical support office sometime tomorrow; it has to do with the screen and fans where the Power LED lights up white, just as when the laptop is running properly.
(I do have warranty on the laptop since it was bought last June, except that if I find out I need to get a replacement, I'll lose all of my work I've been doing on it ever since I started my semester. It's so ridiculous of me to not have all of my work saved on a backup, as I do have an external hard drive. Trouble is, I got way too many problems in getting myself organized, I am not being open-minded as I should, and worst, I am not finding a balance between homework and life.)
Before I had my MATH 117 (Calculus 1 for Engineering) lecture, I was in a lab nearby where my laptop was opened and turned on, functioning properly. I had NetBeans IDE running since I wanted to work on the second part of my current CS 137 (Programming Principles) assignment. Because it was almost time for my lecture, I closed the laptop by simply moving the screen back down onto the keyboard, where it goes into sleep mode. (Anytime I flip up the screen, the laptop is supposed to come back on, and the login sliding screen from Windows 8.1 shows up.)
When I took my seat for the lecture, I wanted to spend a little bit of time to work on my programming assignment. However, upon flipping the screen back up, instead of having the login screen show up, I encountered the problem: the Power LED is showing a white light, but I can't hear the fans running from the vents on the left side of the laptop, and the screen does not turn on. I did try to hold the power button for several seconds, and once at least 10 seconds, except that the Power LED keeps on showing a white light. The light for the Wi-Fi board does not show up.
Whatever it is, I don't want to pull the battery out because I did do that on my last laptop, and it was from there that I couldn't turn the old one back on again. If I pull the battery out from the Envy laptop, it'll short-circuit the connections from the battery to the computer, and thus several components will fry. For now, what I'm doing is leaving the laptop as is to drain the charge on the battery. And then, once I notice that the Power LED does not show a white light anymore, plug the AC adapter, then try turning the laptop back on using the Power Button.
It's going to take a little while for the circuit to drain the charge on my battery though...
Anyway, would you please be so kind as to help me out with this issue? I would really appreciate it if you can give me several recommendations. Thank you!
This question was solved.
View Solution.Hello @GregPDesWHP,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your notebook computer is not powering on, and I would be happy to assist you in this matter!
In order to regain functionality of your computer once again, I recommend following the steps in this document on Computer does not start (Windows 8). If the issue continues after exhausting all of the steps in this document, I recommend contacting our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping! -
RE6500 system time not set and, why set a DNS address?
How do I set the RE6500 system time to current day if it's showing January 1970? It is connected to the router on both frequencies and the extender output is working on both frequencies. I have set the RE6500 to a static address of 192.168.1.3 as the router address is 192.168.1.1. In the RE6500 the default gateway is set to the router address of 192.168.1.1. Is it necessary to set the DNS address in the RE6500 as the router is the default gateway?
Hi Chadster766; thanks for the prompt reply. I tried using the external primary DNS address set in the router - saving and rebooting - and when that didn't work, I used the same IP address as the router 192.168.1.1. That didn't work either; I did a warm re-boot of the computer after setting the DNS in the RE6500. What am I missing or, should I reinstall the RE6500 and use the default DNS settings? I'm using Windows 7 Sp1 and the RE6500 icon does not appear in Network, so it appears to be an issue between Windows and the RE6500.
-
Knowing if the fan is Ok and working...
Yesterday I accidently spilt some chocolate milk on my Macbook, near the back end where the hinge for the laptop opens and closes. In less than a second I unconnected everything dried it down and put it near the window to get some air. Now I know that usually you hear the fan at work or feel the air come out of that area. But now, I haven't heard any fan going on down there...and wanna know if there's anything wrong, or was that the result of reseting the PRAM with the tech on the phone. So how would I know if the fan is ok?
ZeroXH wrote:
1. I figured as much, but since I'm college, using it for less than 15-30 minutes shouldn't be harmful should it?
2. I was expecting as much for the fan, but, logic board? How would I know if the logic board was damaged?
3. I'm outside my warranty period anyways, I was expecting to pay a large sum of money. But since this laptop is very important and I need it soon, how long would this take to be fixed if I were to take it to an apple store over the weekend? And after they replace the fan would they also remove any remains of the liquid while its open? Cause Chocolate milk isn't like water and doesn't really go away into thin air...I'm just worried that it won't be like normal after this repair.
The fan is attached to the logic board and the sensors and motor may be together with the logic board (logic board = motherboard in standard computer-speak). It's all theoretical until someone takes a look at the system. -
Finder Find command is suddenly not speedy and works weirdly
I have a number of small, and one large, problems when I use command-F to find things in the Finder.
After upgrading to Leopard from Tiger, like all users I experienced a WONDERFUL increase in the usefulness of this command. So I use it a lot, and for a long time it worked perfectly. My current problem is that when I type command-F, it opens a new finder window, and...
(1) ... when I click on the box to type the words I want to find, the insertion point doesn't appear, but the letters do appear there after I type something [minor], and...
(2) ... a FEW results of the search do appear instantly, but the window seems to enter a semi-frozen state [major; see below], and ...
(3) ... the Finder window which is finding shows signs of being inactive (scroll bar bubble is gray, not colored; columns do not sort when column header is clicked); window is in some ways unresponsive [middling], and ...
(4) ... after awhile (often as long as 30 or 40 seconds) the window suddenly finishes whatever was holding it up and the full set of results appear, the scroll bar bubble becomes colored, column-header-clicking sorts the column instantly.
In short, there is now a long, weird, semi-inactive period between the initial appearance of a few Find results and the final appearance of the entire list, when I have gotten used to the seemingly 100% instantaneous appearance of a Find request's results. I'm spoiled, and I want my wonderful Find command back!
The only thing I can think of that I might have done to contribute to this is that I HATE the behavior of the Finder searching using the title bar's oval Find window, so I removed that part from the default window setup. That is, I've changed my preferences so that when a new Finder window appears, there is no oval Find window in its upper right-hand corner. Thus, when I type command-F the Finder notices that there is no Find window to put the insertion point into, so it opens a few window with a search field at the top (the "Search for" box). (And then it refuses to put an insertion point into the window where I'm supposed to type the Search string.)
Am I being clear?Did you read my hint at http://www.macosxhints.com/article.php?story=20080229204517495 ?
-
XServe G4 System Drive not found and 2PFW/2/3:FireWire
I tried to Google "2PFW/2/3:FireWire" and only got one answer:
http://macgroup.infopop.cc/eve/forums/a/tpc/f/418609942/m/7401083361
I thought it maybe a drive module problem, as this is the only thing I haven't tried yet.
I changed slot, tried diskutil, fsck but I haven't change disk in drive module.
Is there any other feedback on this ?
How could I repair a disk I even can't see in disk utility ?
OS: 10.3.9 Server.With the Hardware Test CD, sorry, I forgot to tell that. I've tried about everything (diskutil, fsck, PRAM, slots and drive modules) during last night in the datacenter and I think I won't be able to recover data from this disk. I'm not sure this error is related to the faulty drive. I fthis is only a firewire bus error I don't care as I don't use FW on my server.
Too bad I didn't get preventive information from smart. -
Old QT refuses to uninstall...causing iTunes to not install and work.
How can I uninstall QT?
I've gone to the Add/Remove Programs and tried to uninstall it, but a window pops up titled InstallShield Wizard and says: Quicktime setup is preparing the InstallShield Wizard, which will guide you through the Program Setup Process. Please wait.
Can anyone who knows what I'm talking about help?
Windows XPOkay. First: you are amazing!
& thank you so much for helping me.
Second: I changed the Folder Options, and I did another search, and instead of just searching drives C and D, I searched the whole computer, and came up with a lot more (42) files. Although almost half was Apple/QuickTime history from the web, the others were actual QT files, and most of them deleted right away. The leftovers are 2 notepad files that can be deleted, but I don't know if they'd have anything important in them, so I just left them. As for the other 2, one is a File Folder that is holding that QTtask. The other is an MPP file (not sure what that is), and when it's right-clicked, deleting isn't even an option.
♦ http://img262.imageshack.us/img262/3818/appletemp4ny9.png
Thanks so much! =D
Maybe you are looking for
-
Need help to trace the place where error occuring in Web UI of type System
Hi All, Need help to trace the place where error occurring in Web UI of type System error, this error coming while saving the corporate account creation, error message description : - System error: Interruption in Routine READ TABLE GT_CHAR_VAL, CHAR
-
Live View and Inspect BROKEN in DW CS5 & Drupal
I successfully navigated through the confusing instructions for setting up a local Drupal website in Dreamweaver's site manager and was very excited the first time I did a "discover" and DW found all the Drupal files on my local testing server. Yay!
-
How to retain new line characters when using Node.getNodeValue()
Hi, I have xml as shown bellow *<DETAILS>* this is line one this is line two thi is line three *</DETAILS>* when I parse this using dom( Node.getNodeValue() ), the value I am getting is as shown bellow this is line onethis is line twothis is line thr
-
Change in Prompt definition between R2 and R3
We are upgrading our BO environment from R2 to R3 we found that the universe conditions change @Select(Vw Tt Site Visits Facts\Monitor) IN @Prompt('Enter Monitors','A','Vw Tt Site Visits Facts\Monitor',multi,free,not_Persistent,,USER:0) changed to @S
-
How to use Presets on Priemere pro cs6? Wie kann ich Presets in Premiere pro cs6 freischalten?
HEy, i get some new Presets for premiere pro. this are coller correction Presets. But i cant find the Presets in premiere pro. What i have to do to use the Presets in Premiere pro? ( i also put it in the "Presets folder" but Nothing Happens. hey Hal