System file not suitable for running msdos or windows files ???

Please help...
I download the itunes 6.0.5 setup.exe file.
I open it and I see a pop up with Quicktime and Itunes on it. It quickly loads and then a new application opens (a C:// black box
It quickly gets an error (16 Bit MSDOS Subsystem Box) error reads that the system file is not suitable for running msdos or window files. Close or Ignore (neither allow me to load 6.0.5
I am using windows xp

You use probably a UFS file system, right ? Then in this case, use the "-i" option with a value less as 8192. 8192 is the default value for a UFS filesystem that is between 3GB and 1 TB size.
But if you want to store 10M of files, UFS will be limited to 1M per TB : 64-bit: Support of MultiterabyteUFS File Systems (System Administration Guide: Devices and File Systems)
In this case, use instead UFS a ZFS filesystem that supports 2^48 entries !!!

Similar Messages

TS4071 I am trying to download Itunes but it is saying my system is not modified for it. I am running on a 32 bit system whatever that means. Please help!!!

I am trying to download itunes and it's not letting me it keeps telling me that my system is not modified for it. What do I do??? Help!!!

This is a Microsoft Windows Issue.
From a MS Support Engineer:
"Hi,
· Is the computer on a domain?
· Is the issue isolated to only this software or you get the same error message with other software’s as well?
Try the steps below and check if it helps.
Step 1:
Run the software setup file as an administrator and check if it helps.
a. Right click on the setup file of the software that you are trying to install.
b. Select “Run as administrator”.
Step 2:
Temporarily disable the antivirus software running on the computer and check if you are able to install the software.
Disable antivirus software
Warning:
Antivirus software can help protect your computer against viruses and other security threats. In most cases, you shouldn't disable your antivirus software. If you have to temporarily disable it to install other software, you should re-enable it as soon as you're done. If you're connected to the Internet or a network while your antivirus software is disabled, your computer is vulnerable to attacks.
Step 3:
a. Click Start, type "Local Security Policy" (without quotes) and press enter.
b. Click on Software Restriction Policies.
c. In the right pane, double click on the "enforcement".
d. Select “All users except local administrators”.
e. Click Ok and restart the computer and check if the issue is fixed."

In iPhoto how do I stop files from auto resizing as they import? I don't want my files reduced to 72. The option to choose size on the export menu not suitable for up sizing, as you can't restore the quality removed?

in iPhoto how do I stop files from auto resizing as they import? I don't want my files reduced to 72. The option to choose size on the export menu not suitable for up sizing, as you can't restore the quality removed.

Short answer: They are not resizing, there is no quality lost. The dpi is only set when you decide what size you're printing at
Longer answer: Dpi means nothing in the digital world of your computer. There are no "inches" to have "dots per..." Size is measured in pixels. That's the same on your camera. It doesn't take 10 x 8 or 6 x 4 shots. It takes shots measured in megapixels. For instance 4,000 x 3,000 is a 12 megapixel camera.
Using that example, that shot from that camera has 12 million pixels. So that's how many "Dots" there are. To decide the ratio of dots per inch, you now need to decide the "inches" part. And that's printing. Print at 10 x 8 and the dpi will be 4,000/10 or about 400 dpi. At 6 x 4 then it's 4,000/6 or 660 dpi. Work the other way: Print at 300 dpi and the resulting image will be about 13 inches on the longer side.
So, your photo as a fixed number of pixels. Changing the dimensions of the print will vary the dpi, changing the dpi will vary the dimensions of the print.
For more see http://www.rideau-info.com/photos/mythdpi.html
Regards
TD

MiniSAP - SE80 Prompts Error "Printer not suitable for job step..."

Hi all,
I bought an ABAP Objects book. I installed the MiniSAP. When I run SAP GUI and SE80, both with BCUSER and DDIC, it gives me error message "Printer not suitable for job step. Automatic printing not possible."
If I double-click on the message, it does not show the description of the error message, instead it displays an Internet Explorer error message "The page cannot be found."
Furthermore, the same error message, "The Page cannot be found", also appears in the area where the listbox and textbox for selecting Development Class, Program, Function Group, etc. Making these function becomes unavailabale. I cannot see the listbox and textbox in the Object Navigator. The only development class show is "$_TMP_BCUSER" (if I recall correctly). But nothing is in the development class.
How do I solve this problem?
OS: Windows XP Professional
Browser Installed: Internet Explorer and Firefox
Other info: I put incorrect IP Address in the Hosts file while installation was in progress. This created error. I then correct the IP Address in the Hosts file and resume installation. I still encountered error until I restarted my computer and resume installtion. I use IP Address 10.10.0.10.
Thanks in advance.
Regards,
Goh Tiam Tjai

I searched the solution in the other SDN sub forum (ABAP Programming). The following patch solves the problem.
http://www.sap-press.de/download/dateien/473/sapgui_patch.zip
Regards,
Goh Tiam Tjai

Error :No operating system credentials were set for running the program

i am getting this error when i am trying to execute a shell script in cmc. i got the status as failed, when clicked on that failed message this is what i got
Title: delete_month
Document Type: Program
Status Failed
Destination: Unmanaged Disk destination properties have been set to the chosen Job Server's defaults.
Owner: boadmin
Server Used: cms_451.ProgramJobServer
PID: 15010
Folder Path: Temp/
Remote Instance: No
Creation Time: 12/1/2010 7:21 PM
Expiry: 12/1/2020 7:21 PM
Start Time: 12/1/2010 7:21 PM
End Time: 12/1/2010 7:21 PM
Error Message: No operating system credentials were set for running the program.
what might be the reason

what do u mean by pm application, i didn't get that
we r using boe xi 3.1 sp3.on sun solaris
my exact scenerio is
I wrote a shell script to delete the reports which r one month old. the reports generated by the boe r placed in unix machine(in a specific folder for example abc) and my boe server is also on unix .I imported the the shell script into boe.I assigned the path /xx/yy/abc (the path where our reports r stored) to the arguments and i gave the working directory path as the xx/yy/bobj/bobje/data/frsinput/a0_89/ ( this is the path where my shell script is present).after giving these details i am unable to delete any of the content from that folder. I am getting the failed message when i am trying to execute the object in cmc. i am pasting the shell script as well as the error message here if any body knows anything help me. do i need to set anything in cmc or what i need to do
this is the shell script to delete the files in the specified directory
#!/bin/ksh
# set -x
if [[ $# != 1 ]]; then
echo "Usage : $0 [Directory Path]"
exit 0
fi
echo "Source directory : " $1
# To display the list of files more than a month older
for v_fname in $(find "$1"/ -name "*" -mtime +30 -type f)
do
echo "$v_fname"
done
# To delete the files of more than 1 month older
find "$1"/ -name "*" -mtime +30 -type f -exec rm {} \;

Serial Number not suitable for movement when doing goods issue or sto ?

Dear all ,
I have a issue , when doing sto or goods issue ,
i have a material code serial number profile is off physical quantity is laying 20 and my requirement is active the serial no
and assign to serial number for the material ,
Tcode is iq01 put the material , serial number and category after save when i am doing ma1a putting material ,quantity
and that serial number click on save , geting error like
Stock data of serial number 1234 not suitable for movement
when i am checking iq02 serial number is showing but checking in MMbe there is not showing
Regards
Shiv

hello,
to activate the serial numbers you first have to clear all the stock for this material (MVT 562 / 502 or other)
Than activate the serial in the material muster.
in your situation (if i understood correctly) what you need is:
1. disable the serial numbers for the material (move them to another material)
2. deactivate the serial number in the material master
3. get rid of all the stack - post it with 562 or 502
4. activate serial numbers
5. post the material back to stock - 561 / 501 - than the system will require a serial number for each unit

Serial Number not suitable for movment

Dear Friends,
while doing PGI through movement type-601 we are getting error message "Stock Data for serial number xxxxx not suitable for movement"
please suggest.
thanks

Hi,
While doing PGI give the serial number which is assigned to your exsisting in stock.
Go To MMBE
and see which valuation stock and wich storage location you want to issue and righ click and check the equipment/serial number in system and give the appropriate serial number available in stock

IO231: Stock data of serial number &1 not suitable for movement

Hi experts,
I have unique problem with serialized material posting.We are having serialized managed materials which are posted to quality inspection stock.The user was able to post partial quantity to unrestricted after usage decision but when tried to post remainig quantity it is giving error 'IO231: Stock data of serial number &1 not suitable for movement".I checked serial number history in iq02 & it shows that same serial numbers were used for some order in the past which is already delivered.I am not able to understand how it allowed to post same serial numbers again for the same material and if it is normal why it is giving above error when we try to post remaining quantity?
I tried by changing serial profile in the material master with all optional fields and without stock check and equipment and try to post but its not working.
I want to somehow post material to unrestricted use from quality inspection with or without serial numbers.
I am working on 4.7 system
Can u guys help me.
Thanks & Regards,
Sachin.

Hi,
Please check this SAP Note: 213861, 1229108
From Note 213861
Release 4.0A or 4.0B:
Table T156S
Maintain the data using Transaction SM31.Flag for transport using Transaction SE16.
All entries for movement types 645 and 647 should be filled with '****' in field T156S-VRGNG.
Release 4.5A or 4.5B:
Table T156S
Maintain the data using Transaction SM31.Flag for transport using Transaction SE16.
All entries for movement types 645, 647 and 675 to 678 should be filled with '****' in field T156S-VRGNG.
Release 4.6A to 4.6C:
Table T156SY
Maintain the data using Transaction SM30 using view V_T156SY.If necessary, manually flag for transport in this transaction.
All entries for posting string references 645 or 647 should be filled in field T156SY-VRGNG_S or T156SY-VRGNG_H with '****'.
For Note 1229108
A correction instructions has given Please take help from BASIS Team....
This will solve the Problem...
Regards
GK.
Edited by: Gnana Kumar on Nov 3, 2010 7:16 AM

System is not configured for WS Securitylogon

Greetings,
I've created and attempted to begin transport of my first provider service.
I'm having some issues in our QA system
The SE80 objects attached to a transport & transported no problem.
I had to manually add the ICF objects onto a transport but I got 'em there
I had to manually create the Service and Endpoint definition in SOAMANAGER
Unfortunately in our QA system I'm getting the following error in SOAMANAGER.
has anyone else seen this error, and if so, how did you or your BASIS team resolve it?
Error: ICF: Cannot generate ICF information from SOAP information[System is not configured for WS Securitylogon (SAP Note 1319507)]

Hi Doug,
I haven't seen this before but I had a quick look at SAP Note 1319507 & it gives a clear indication of how to fix this with report WSS_SETUP. Did this approach in the note not work?
One more point...I'm not sure which ICF objects you manually added but in general you would just transport the SE80 objects. Once the SE80 objects are QA you would then re-do the SOAMANAGER (service & endpoint) configuration, this would then add the ICF nodes automatically.
Regards, Trevor

With out goods issue for order system should not allow for order confirmati

Dear all
with out goods issue system should not allow for order/operation confirmation.
how it is possible.
Regrads
Srinivas

Dear ,
In some cases we required to do confirmation or TECO without GI .
We can change it as per req using user exit
Regards,
Ishwar

Stock data of serial number not suitable for movement

We have a situation where we have had to put some serialized parts on a rework production order. When we are trying to bring them back into stock, we're getting a message that says "Stock data of serial number not suitable for movement." I'm guessing that this is because this serial number had existed in stock before (since this is a rework of an existing material/serial number.) We need to receive this back into stock using this same serial number. How is that possible?
Thanks in advance for your help.
Sybil

Dear,
Please refer these threads,
Re: Removing Serial number Profile
IQ02 Shows Blocked Stock for Serial Number
Hope it will help you.
Regards,
R.Brahmankar

Stock data of serial number 90645 not suitable for Movement.

HI Friends,
We are having issue while doing return delivery for a service/Repair order, the serial number related error messages are coming.
the error messages are
1. Stock data of serial number 90645 not suitable for Movement.
2 . Serial number can not be used here.
3 termination of gods issue posting for delivery note 855222.
The following points explain the scenario..
1. The Previous and next documents are through with the post Goods receipt for the same material with different serial numbers.
2. The movemnt is 653 E
3 Client placing one service/repair order and creating return delivry against this order and assign serial number and trying to post Goods receipt.
4 The serial number profile is having Exist/ indicator for SDRE return delivery serial usage is 'optional' and Equipe' with equirement'
Robert

Hi Anybody come across this requirement.

On my iPhone 4s, I sent a picture via email and asked to size it down. However, it seems now that the pic stored on my iphone is now forever the smaller size which is not suitable for printing. Is there any way to get the larger size back?

On my iPhone 4s, I sent a picture via email and asked to size it down. However, it seems now that the pic stored on my iphone is now forever the smaller size which is not suitable for printing. Is there any way to get the larger size back?

sure pretty simple. make a backup of your current settings
http://support.apple.com/kb/HT1766?viewlocale=en_US
then restore device from old backup you need pics off of
then import pics to computer
http://support.apple.com/kb/HT4083
you may need to save pics to camera roll first
then restore the new backup and sync pics back to phone via itunes
Peace, Clyde

Device not suitable for charging

My friends has been trying to charge his iPhone 4 however when he plugs it to the wall (using the white USB cable charger that came with the phone), he gets a message "device not suitable for charging" (something like that). It just started doing this yesterday. He shut down his phone and rebooted and still the issue remains. He also tried another cord and the same thing.
Thanks!

have you tried a different charger, or a different phone on the same charger? That would be the next step.

New connection not suitable for needs

I had total bb installed a few weeks back for my sons online gaming and ever since being installed he has had constant packet loss and dc's meaning that the line is not suitable for what he needs it for. I went ahead and called technical support and they went through the mumble jumble that I expected them to such as check master socket etc...etc.. at the end I was told the problem would be elevated and someone would be in touch, nobody got intouch and I called the cancellation department today only to be told that I'd be charged £400 if I tried to cancel and that the line speed was fine. I tried to explain that the line speed was not the problem but the quality of the line and the constant packet loss and dc's from any form of gaming.
Anyone any ideas on how I can get my problems through to someone that will actually help me, I refuse to pay £400 to cancel a service that is not working correctly.

wired or wireless. Plz post your router stats and try a ping test@ pingtest.net posting the results here
I am no expert. Correct me when I am wrong. Learning is good!

System file not suitable for running msdos or windows files ???

Similar Messages

Maybe you are looking for