System for serious multicam work?

Hello everyone,
I am planning to build a new editing workstation for serious multicam work. I have read lots of discussions here, in Premiere hardware forums, but didn't find help. Sorry, if my research wasn't complete.
Serious multicam - it means in my case 8-10 camera footage (10-bit, 4:2:2), some of them are AVC-Intra100 (P2 cards) and others DNxHD (220Mb/s, recorded by BMD Hyperdeck Studio). Is it possible to build up a system, which can handle all this footage in multicam work (CS6), flawlessly, in real time, or is it just my wet dream for now...?
Planned budget for this system is 6-8k €.
PS! Currently I don't have BMD Hyperdeck Studio - I've heard, that DNxHD wrapped as MXF files are not supported in PPro (even CS6). Is it true?
Thanks!

This is a very hard decision...
As I am quite new in this forum, maybe you can help me to find some forum users with their high-end workstations, who can make a real world test, how hard is 8-10 camera (4:2:2, 10-bit) multicam project without effects (maybe some few color corrections, which should be handled by GPU) compared to single 6 core and Dual Xeon systems? Or should I make a new thread to make a call...?
Anyway, I tried to build my own (dream) system, considering opinions in this great forum.
Case: Cooler Master COSMOS II FULL TOWER
350
MB: ASUS Z9PE-D8 Dual LGA 2011 Intel
500
CPU: 2x Intel Xeon E5-2690
3950
GPU: Palit GeForce 600 Series GTX 680 4GB JetStream
600
RAID: Areca 1882IX-12
800
PSU: Enermax G1600-MA 1600W
850
RAM: Corsair X79 Memory Vengeance Jet Black 64GB DDR3 1600 MHz
500
OS: 1x Intel SSD 240GB 520 SATA 6Gb/s
300
HDD setup in RAID3 configuration: 8x Seagate Constellation ES ST1000NM0011 1TB 7200rpm 64MB SATA 6Gb/s
1000
Total
8850€
Prices are estimated.
So what do you think? Is it good enough to handle my future multicam projects?
Thanks in advance!

Similar Messages

  • Our system for captioning only works now if we remove the textColor attribute. Why?

    We typically include the header elements as follows:
    {QTtext}{timescale:100}{size:16}{font:Arial}{justify:left}{backColor:0,0,0}{text Color:65535,65535,65535}
    {width:480}{height:100}
    [00:00:00]Music.
    But recently, we found we have to remove "{textColor:65535,65535,65535}" to be able to see the text. No big deal, except the text now appears justified center.
    What changed?

    spottedcatfish wrote:
    Here's the catch.  The line that is using the "Smartphones Talk Free" promo has to have a data package attached to it, which means that you would wind up in this situation:
    Your Number (Line 1) - Calling Plan + Data Package
    His Number (Line 2) - $9.99 + Data Package
    New Number (Line 3) - $0 + Data package (as long as the data package is kept on the line)
    You'd have to have 3 data packages, one to keep the promo, and then one on the lines with the smartphones active.  Contracts and promotions are tied to the phone number, so you can't switch the number or contract end date between lines.  If your husband wants to keep his number, the best thing to do will be to wait until he is eligible for an upgrade.
    If there is not a smartphone on line 2, but just a standard phone as was stated by the OP, you do not have to have a data plan on this line. To qualify for the smartphones talk free promotion, you do not have to have a data plan on all lines, just the lines you sign up with the offer for, i.e. just the primary line that is upgrading to the smartphone and the additional line that you are adding so that you can take advantage of the offer.
    If you do want to take advantage of the smartphone talk free offer, though, you will have to leave the smartphone on the line you sign up with. If you move the phone to your 2nd line, I believe that the discount will be stopped.

  • HT1206 I need a work iTunes account for my work system, but used my work email address as an associated email to my personal iTunes account. Now I can't use the work email to create the new iTunes account.  how do I remove the email from my personal accou

    Since I upgraded to Mavericks from Snow Leopard I need a work iTunes account for my work system, but used my work email address as an associated email to my personal iTunes account.
    Now I can't use the work email to create the new iTunes account.  how do I remove the email from my personal account?

    You can long into an account via this page and update the email addresses that you have on it : http://appleid.apple.com

  • I downloaded the latest operating system for my iPhone 5.  It worked fine for about two minutes then the phone requested a password number to continue. Each time I inserted numbers, the phone would lock up for a period of time.  Now, it says "iPhone

    I downloaded the latest operating system for my iPhone 5.  It worked fine for about two minutes then the phone requested a password number to continue. Each time I inserted numbers, which were incorrect, the phone would lock up for a certain period of time.  Now, it says “iPhone is Disabled”.  It said to “Connect to iTunes” which I did, but iTunes does not recognize my phone.  If I scroll the face to the right, it goes to the phone number face and says, "No Service". Can I do something to make the phone work?

    Forgot passcode for your iPhone, iPad, or iPod touch, or ...

  • Work load in system for the spool task

    Dear  Friends,
    I find that the work load in system for the spool task is showing 12785
    Avg resp time in ms as on today . Normally also it remains in thousand
    itself . Kindly suggest how can I make this in better response time.
    Thanks & Best Regards,
    Atul K

    Hi Authul
    I think at that point of time may be more number of user may be requested for resources through spool  process ,why dont you increase the spool work process any try to evalutate the same situation
    regards
    George

  • I have deleloped firefox npapi plugin which is working fine in some system and not loading in some system for firefox 4.

    Npapi plugin developed for application was working absolutely fine for firefox version upto 3.6.
    But in firefox 4.0 Its behavior is not consistent.
    For some computer its working fine bt for some computer its not getting loaded in webpage.Here i have use <embed> tag to load plugin from webpage.
    Thanx in advance

    Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox. <br />
    http://forums.mozillazine.org/viewforum.php?f=25 <br />
    You'll need to register and login to be able to post in that forum.

  • I tried to work this for a telephone system Yvonne but stopped work and not work, what do I do

    Tried to work this phone system iphone3g but stops working system did not speak ..What can I do to restart the phone???

    Post in your native language... your statments make no sense in English.

  • Premiere Pro 7.1 serious Multicam Editing problems

    Hello, I am posting here because the bug report I filed one week ago to Adobe didn't give a result -no response at all from the bug department.
    I have two serious Multicam Editing Problems.
    PC Configuration: Core i7950, Asus P6TD Deluxe, 12GB DDR3 1600MHZ, Quadro K4000, SSD for the system, Seagate Constellation 7200rpm for video editing.
    1. When multicam mode is on at the program monitor, I press play and the program doesn't respond at all. The timeline plays till the end and the program just doesn't let you do anything but wait until playback of the whole timeline is over. Then the program works again (no "not responding" message in Windows).
    2. Sometimes the waveform doesn't even appear at the multicam audio clip. I read in other forums that this problem is found specifically at Premiere Pro version 7.1 (October release).
    I would be grateful with your help.
    Thank you,
    Stavros Symeonidis

    The media is always a combination of HD .MOV (dSLR footage and .MTS (from my Sony Vg-30). However, I also tested it with .mpeg files created by "match sequence settings". GPU acceleration is always on, as I use nVidia Quadro K4000 with the latest drivers (331.82).
    I always create the multicam sequences manually and the problem occurs with any amount of camera angles.
    The problem was not solved by reinstaling Windows (7 and 8). In general, I have no other issue with my PC system, except from this specific one.
    It doesn't appear always, however it will definitely happen if you press twice or three times the letter L, to fast forward the preview of your Multicam Sequence.
    I remind you that this only happens when multicam monitor is toggled at the program monitor.
    Did all these help at all to even reproduce this situation?
    Thank you,
    Stavros Symeonidis

  • Best operating system for music applications( or most popular)

    hi, gonna be buying a mac laptop.
    im not feeling leopard for coupla reasons.
    im new to all this by the way. so dont know about the diff versions of operating systems for mac........i just know tiger 10.4 was one prior.
    for music software, which op system and version is most compatible with the various music apps and vst companies etc out there. like i dont mind not using the latest versions of popular programmes like pro tools and logic and ableton.
    leopared is very specific and not backwards compatiblewith alot of software it seems.
    cheers
    like whats the most popular system in use by music production culture, not necessarily professionals, just hobbyists.
    like if you have service pack 2 XP, i know youre good to go. simple as that.
    whats the mac equivalent?

    Eddie Eagle wrote:
    I'm on 10.4.11 with G5 ond 10.5.4 with macbook.
    Leopard doesn't work well with G5!!
    If you have tiger, stay with it, its solid. There is no reason to use leo at the moment!
    There is nothing you cannot do with tiger concerning audio.
    When its time to upgrade, you can do, but who knows.....
    Cheers Eddie
    What FUD. Seriously. Plenty of people on this board are running leopard with no problem. My leopard is solid, and it runs logic and reason.
    Leopard worked fine on my G5.
    As for the comment about leopard not being able to run tiger....well, that's kinda mind blowing.

  • BioSRC: a Ports-like system for installing bioinformatics software

    While this might not be of great use for people administering their own Arch Linux system, I do know that there are at least a couple other bioinformaticians around these parts who might find it useful anyway. Many bioinformaticians use shared computing resources (clusters), so they do not have administrative permissions to install software system-wide.  Instead, we manually install software to our home directories or shared drives. Unfortunately, bioinformatics software is usually released by biologists, not software engineers, so the packaging standards, if there are any, generally leave something to be desired. Often some amount of manual work needs to be done to compile and install the software.
    I got tired of dealing with this on a personal level and in our group we were setting up a lot of software to be shared between us. So, I hit on the idea of adapting another package that I maintain, GSRC, which uses the Ports-like GARstow system to install GNU software, to produce a dedicated system for easily installing bioinformatics software, called BioSRC.
    BioSRC includes many common bioinformatics tools (under pkg/bio), as well as general tools that are useful in analysis pipelines (pkg/tools), bioinformatics-related libraries or library-dependencies of other BioSRC software (pkg/libs) and the latest versions of common programming languages/environments (pkg/dev...really handy if, like me, your cluster only has ancient versions of Python). New packages are being added as fast as I can and I welcome requests (note that I'm only adding properly licensed free and open source software...no "academic use only", license-free, or otherwise proprietary software will be included in BioSRC).
    Currently there are no formal releases but rather you should just  clone the Git repository. Setting up is simple:
    $ git clone git://gitorious.org/biosrc/biosrc.git
    $ cd biosrc
    $ ./bootstrap
    $ ./configure --prefix=/foo/bio-software
    $ make install
    The last step is optional and just installs the documentation ("info biosrc") and a biosrc script (see below).
    After that, any software can be installed easily to your chosen directory, /foo/bio-software in the above example, with Make:
    $ make -C pkg/bio/ncbi-blast install
    This will fetch the package, verify its checksums, extract it, configure it, build it and finally install it. Under your install prefix, packages are first installed to the "packages" directory and their contents are then symlinked into the standard locations under the prefix (i.e. ${prefix}/bin/bar will be a link to ${prefix}/packages/foo-1.0/bin/bar). Installing a new version of a package does not uninstall the old version; only the links are replaced. Thus, if you still need to use the old version for whatever reason, it  remains available in the packages directory.
    To make your life even easier, the biosrc script automates a lot of stuff for you, allowing you to install, uninstall, search, display info, etc from any directory:
    $ biosrc search alignment
    $ biosrc info hmmer
    $ biosrc install ncbi-blast
    See the documentation for more information.
    Enjoy!
    Website
    Project site on Gitorious
    Mailing List
    Last edited by jakobcreutzfeldt (2014-03-07 13:51:18)

    THIS IS CHEATING!!!!!!!!!!!!!!!!!!!!!!!!!!
    People ranging from system experts to housewives install Adobe software all the time, but most of the times this occurs under very stressfull situations like: an opreating system reinstall or just after unboxing a brand new computrer. People does not come to Adobe website to browse and see if they like something, they come because they are unable to make another piece of software work, lot of them come frustrated or in a hurry, and they do not notice the check box, it is intentionally designed to pass unoticed. Even experts hit "download" without any further reading, just becuase Adobe was believed to be a serious and reliable company. But this kind of practices deminishes your credibility and image. I think, having the checkbox checked by default is not a nice practice, in fact I consider it unethical and fraudulent. A honset company would make very sure to have a checkbox like this cleared by default.
    I used to trust blindly in companies like yours, because I considered them honest and ethical, but sadly this changes everything.
    Too bad you cheat people like this.

  • System crashed with nothing working (question mark, os symbol etc.)

    After leaving system in sleep mode overnight, came back to startup and system had crashed. Once restarting the unit makes a scratchy beeping noise approximately 3 times spaced out by 10-20 seconds. Then screen goes to flashing question mark and os symbol folder.
    I have tried the following to resolve:
    1. Reboot holding down Shift key - Did not work
    2. Reboot holding down Option key - Did not work
    3. Rebooted (holding down the C button) with most recent OS X Tiger system/install cd - This caused the system to start to the Grey Apple symbol and then it went to a grey 'Do Not Enter' symbol and freezes/stops.
    4. Rebooted (holding down the C button) with Hardware Diagnostic CD - Was able to run Hardware diagnosis and found no problems. I used the Restart command in this software and system had same issues.
    5. Rebooted (holding down the C button)with Apple Care Protection CD and this caused flashing diskette with question mark.
    Nothing appears to work and it appears I am on my way to Cafe' Mac (my local Apple store) for serious repairs. I can not lose the hard drive contents (pictures and everything that I do not have backed up).
    Any help or advice to get my system back to normal would be greatly appreciated....
    Thanks in advance.
    iMac G4   Mac OS X (10.4.8)  

    Sure, use either Mac... but it all depends if your old MacBook will boot into Firewire target disk mode.
    If it does just pop in the DVD (in the good DVD drive) and install. I'd suggest a reformat also, under the circumstances.
    To use FireWire target disk mode
    1. Make sure that the target computer is turned off. If you are using a PowerBook or iBook as the target computer, you should also plug in its AC power adapter.
    2. Use a FireWire cable to connect the target computer to a host computer. The host computer does not need to be turned off.
    3. Start up the target computer and immediately press and hold down the T key until the FireWire icon appears. The hard disk of the target computer should become available to the host computer and will likely appear on desktop. (If the target computer is running Mac OS X 10.4 or later, you can also open System Preferences, choose Startup Disk, and click Target Disk Mode. Then restart the computer and it will start up in Target Disk Mode.)
    4. When you are finished copying files, drag the target computer's hard disk icon to the Trash or select Put Away from the File menu (Mac OS 9) or Eject from the File menu (Mac OS X).
    5. Press the target computer's power button to turn it off.
    6. Unplug the FireWire cable.
    If the target computer's hard disk does not become available to the host computer, check the cable connections and restart the host computer.
    -mj
    Message was edited by: macjack

  • Itunes wont open error says I need Quicktime version 7.5 5 for it to work

    Computer wasn't working got a new operation system installed not when I plug my Iphone in it only brings Iphoto up I can't get Itunes to come up and every time I try it says error I need version 7.5 5 Quicktime player for Itunes to work How do I fix this

    Click here and install the software.
    (80824)

  • After patching XI system to SP14, disp+work not running

    Hi All,
    We have finished XI installation, then we also patching it from SP9->SP14 NW04s SR2. it works ok in SP9, but when we completed patching.
    then when we start XI, it runs for 3-4mins, then disp+work in MMC stops.
    following is the developer trace. pls help
    Hardware: NT 2003 server. 3G cpu, 2G memory, 10G virtual memory
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      00
    sid        HXI
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    133
    intno      20050900
    make:      multithreaded, Unicode, optimized
    pid        2732
    Mon Feb 25 15:27:35 2008
    kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
    length of sys_adm_ext is 576 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (00 2732) [dpxxdisp.c   1239]
         shared lib "dw_xml.dll" version 133 successfully loaded
         shared lib "dw_xtc.dll" version 133 successfully loaded
         shared lib "dw_stl.dll" version 133 successfully loaded
         shared lib "dw_gui.dll" version 133 successfully loaded
         shared lib "dw_mdm.dll" version 133 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3900
    Mon Feb 25 15:27:41 2008
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5371]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >CDCXI_HXI_00                            <
    DpShMCreate: sizeof(wp_adm)          18672     (1436)
    DpShMCreate: sizeof(tm_adm)          4270848     (21248)
    DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
    DpShMCreate: sizeof(comm_adm)          528064     (1048)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (96)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1544)
    DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 06D30040, size: 4930904)
    DpShMCreate: allocated sys_adm at 06D30040
    DpShMCreate: allocated wp_adm at 06D32090
    DpShMCreate: allocated tm_adm_list at 06D36980
    DpShMCreate: allocated tm_adm at 06D369B0
    DpShMCreate: allocated wp_ca_adm at 071494B0
    DpShMCreate: allocated appc_ca_adm at 0714F270
    DpShMCreate: allocated comm_adm at 071511B0
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 071D2070
    DpShMCreate: allocated gw_adm at 071D20B0
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 071D20E0
    DpShMCreate: allocated wall_adm at 071D20E8
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    ThTaskStatus: rdisp/reset_online_during_debug 0
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation view
    <EsNT> Using memory model view.
    <EsNT> Memory Reset disabled as NT default
    <ES> 511 blocks reserved for free list.
    ES initialized.
    Mon Feb 25 15:27:42 2008
    J2EE server info
      start = TRUE
      state = STARTED
      pid = 3016
      argv[0] = C:\usr\sap\HXI\DVEBMGS00\exe\jcontrol.EXE
      argv[1] = C:\usr\sap\HXI\DVEBMGS00\exe\jcontrol.EXE
      argv[2] = pf=C:\usr\sap\HXI\SYS\profile\HXI_DVEBMGS00_CDCXI
      argv[3] = -DSAPSTART=1
      argv[4] = -DCONNECT_PORT=65000
      argv[5] = -DSAPSYSTEM=00
      argv[6] = -DSAPSYSTEMNAME=HXI
      argv[7] = -DSAPMYNAME=CDCXI_HXI_00
      argv[8] = -DSAPPROFILE=C:\usr\sap\HXI\SYS\profile\HXI_DVEBMGS00_CDCXI
      argv[9] = -DFRFC_FALLBACK=ON
      argv[10] = -DFRFC_FALLBACK_HOST=localhost
      start_lazy = 0
      start_control = SAP J2EE startup framework
    DpJ2eeStart: j2ee state = STARTED
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1629]
    Mon Feb 25 15:27:43 2008
    ***LOG Q0K=> DpMsAttach, mscon ( CDCXI) [dpxxdisp.c   11799]
    DpStartStopMsg: send start message (myname is >CDCXI_HXI_00                            <)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    Mon Feb 25 15:27:44 2008
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 133
    Release check o.K.
    DpJ2eeLogin: j2ee state = CONNECTED
    Mon Feb 25 15:27:53 2008
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4361]
    ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1460
        (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1177) [nixxi.cpp    4361]
    DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
    DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3016)
    ERROR => DpProcKill: kill failed [dpntdisp.c   371]
    DpIJ2eeShutdown: j2ee state = SHUTDOWN
    Mon Feb 25 15:28:23 2008
    ERROR => DpHdlDeadWp: W0 (pid 3116) died [dpxxdisp.c   14507]
    ERROR => DpHdlDeadWp: W1 (pid 3104) died [dpxxdisp.c   14507]
    ERROR => DpHdlDeadWp: W2 (pid 3072) died [dpxxdisp.c   14507]
    ERROR => DpHdlDeadWp: W3 (pid 3148) died [dpxxdisp.c   14507]
    ERROR => DpHdlDeadWp: W4 (pid 3140) died [dpxxdisp.c   14507]
    ERROR => DpHdlDeadWp: W5 (pid 3120) died [dpxxdisp.c   14507]
    my types changed after wp death/restart 0xbf --> 0xbe
    ERROR => DpHdlDeadWp: W6 (pid 3096) died [dpxxdisp.c   14507]
    my types changed after wp death/restart 0xbe --> 0xbc
    ERROR => DpHdlDeadWp: W7 (pid 3092) died [dpxxdisp.c   14507]
    my types changed after wp death/restart 0xbc --> 0xb8
    ERROR => DpHdlDeadWp: W8 (pid 3136) died [dpxxdisp.c   14507]
    ERROR => DpHdlDeadWp: W9 (pid 3080) died [dpxxdisp.c   14507]
    ERROR => DpHdlDeadWp: W10 (pid 3172) died [dpxxdisp.c   14507]
    my types changed after wp death/restart 0xb8 --> 0xb0
    ERROR => DpHdlDeadWp: W11 (pid 3164) died [dpxxdisp.c   14507]
    my types changed after wp death/restart 0xb0 --> 0xa0
    ERROR => DpHdlDeadWp: W12 (pid 3204) died [dpxxdisp.c   14507]
    my types changed after wp death/restart 0xa0 --> 0x80
    DP_FATAL_ERROR => DpWPCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=1585
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Feb 25 15:28:33 2008
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long)               Mon Feb 25 07:28:33 2008
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program          Cl  User         Action                    Table
    0 DIA     3116 Ended         no      1   0        0                                                                         
    1 DIA     3104 Ended         no      1   0        0                                                                         
    2 DIA     3072 Ended         no      1   0        0                                                                         
    3 DIA     3148 Ended         no      1   0        0                                                                         
    4 DIA     3140 Ended         no      1   0        0                                                                         
    5 DIA     3120 Ended         no      1   0        0                                                                         
    6 UPD     3096 Ended         no      1   0        0                                                                         
    7 ENQ     3092 Ended         no      1   0        0                                                                         
    8 BTC     3136 Ended         no      1   0        0                                                                         
    9 BTC     3080 Ended         no      1   0        0                                                                         
    10 BTC     3172 Ended         no      1   0        0                                                                         
    11 SPO     3164 Ended         no      1   0        0                                                                         
    12 UP2     3204 Ended         no      1   0        0                                                                         
    Dispatcher Queue Statistics               Mon Feb 25 07:28:33 2008
    ===========================
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    NOWP
    0
    2
    2000
    6
    6
    --------++++--
    +
    DIA
    5
    5
    2000
    5
    0
    --------++++--
    +
    UPD
    0
    0
    2000
    0
    0
    --------++++--
    +
    ENQ
    0
    0
    2000
    0
    0
    --------++++--
    +
    BTC
    0
    0
    2000
    0
    0
    --------++++--
    +
    SPO
    0
    0
    2000
    0
    0
    --------++++--
    +
    UP2
    0
    0
    2000
    0
    0
    --------++++--
    +
    max_rq_id          12
    wake_evt_udp_now     0
    wake events           total     8,  udp     7 ( 87%),  shm     1 ( 12%)
    since last update     total     8,  udp     7 ( 87%),  shm     1 ( 12%)
    Dump of tm_adm structure:               Mon Feb 25 07:28:33 2008
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks               Mon Feb 25 07:28:33 2008
    =============================
    Slots: 300, Used: 1, Max: 0
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    0
    DISPATCHER
    -1
    WPCAAD000
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=1585
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Feb 25 15:28:38 2008
    NiISelect: TIMEOUT occured (5000ms)
    DpHalt: shutdown server >CDCXI_HXI_00                            < (normal)
    DpJ2eeDisableRestart
    DpModState: buffer in state MBUF_PREPARED
    NiBufSend starting
    NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIModState: change state to SHUTDOWN
    DpModState: change server state from STARTING to SHUTDOWN
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    Stop work processes
    Stop gateway
    killing process (2992) (SOFT_KILL)
    Stop icman
    killing process (2968) (SOFT_KILL)
    Terminate gui connections
    wait for end of work processes
    wait for end of gateway
    [DpProcDied] Process lives  (PID:2992  HANDLE:1556)
    waiting for termination of gateway ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1585
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Feb 25 15:28:39 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:2992  HANDLE:1556)
    wait for end of icman
    [DpProcDied] Process lives  (PID:2968  HANDLE:1560)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1585
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Feb 25 15:28:40 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:2968  HANDLE:1560)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1585
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Feb 25 15:28:41 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:2968  HANDLE:1560)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1585
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Feb 25 15:28:42 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:2968  HANDLE:1560)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1585
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Feb 25 15:28:43 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:2968  HANDLE:1560)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1585
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Feb 25 15:28:44 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:2968  HANDLE:1560)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1585
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Feb 25 15:28:45 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:2968  HANDLE:1560)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1585
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Feb 25 15:28:46 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:2968  HANDLE:1560)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1585
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Feb 25 15:28:47 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:2968  HANDLE:1560)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1585
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Feb 25 15:28:48 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:2968  HANDLE:1560)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1585
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Feb 25 15:28:49 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:2968  HANDLE:1560)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1585
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Feb 25 15:28:50 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:2968  HANDLE:1560)
    [DpProcDied] Process died  (PID:3016  HANDLE:1540)
    DpStartStopMsg: send stop message (myname is >CDCXI_HXI_00                            <)
    NiIMyHostName: hostname = 'CDCXI'
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
    DpConvertRequest: net size = 189 bytes
    NiBufSend starting
    NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
    MsINiWrite: sent 562 bytes
    send msg (len 110+452) to name                    -, type 4, key -
    DpStartStopMsg: stop msg sent
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 recv would block (errno=EAGAIN)
    NiIRead: read for hdl 3 timed out (0ms)
    DpHalt: no more messages from the message server
    DpHalt: send keepalive to synchronize with the message server
    NiBufSend starting
    NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
    MsINiWrite: sent 114 bytes
    send msg (len 110+4) to name           MSG_SERVER, type 0, key -
    MsSndName: MS_NOOP ok
    Send 4 bytes to MSG_SERVER
    NiIRead: hdl 3 recv would block (errno=EAGAIN)
    NiIPeek: peek successful for hdl 3 (r)
    NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=114
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 114 bytes
    MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
    Received 4 bytes from MSG_SERVER                             
    Received opcode MS_NOOP from msg_server, reply MSOP_OK
    MsOpReceive: ok
    MsSendKeepalive : keepalive sent to message server
    NiIRead: hdl 3 recv would block (errno=EAGAIN)
    Mon Feb 25 15:28:51 2008
    NiIPeek: peek for hdl 3 timed out (r; 1000ms)
    NiIRead: read for hdl 3 timed out (1000ms)
    DpHalt: no more messages from the message server
    DpHalt: sync with message server o.k.
    detach from message server
    ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   12145]
    NiBufSend starting
    NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIDetach: send logout to msg_server
    MsIDetach: call exit function
    DpMsShutdownHook called
    NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
    SiSelNSet: set events of sock 1484 to: ---
    NiBufISelRemove: remove hdl 3 from set0
    SiSelNRemove: removed sock 1484 (pos=3)
    SiSelNRemove: removed sock 1484
    NiSelIRemove: removed hdl 3
    MBUF state OFF
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
    LOCK WP ca_blk 1
    make DISP owner of wp_ca_blk 1
    DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
    MBUF component DOWN
    NiICloseHandle: shutdown and close hdl 3 / sock 1484
    NiBufIClose: clear extension for hdl 3
    MsIDetach: detach MS-system
    cleanup EM
    EsCleanup ....
    EmCleanup() -> 0
    Es2Cleanup: Cleanup ES2
    ***LOG Q05=> DpHalt, DPStop ( 2732) [dpxxdisp.c   10417]
    Good Bye .....

    Yes, I have, following is dev_w0, thank you in advance.
    trc file: "dev_w0", trc level: 1, release: "700"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, MJ
    B 
    B Mon Feb 25 15:40:12 2008
    B  create_con (con_name=R/3)
    B  Loading DB library 'C:\usr\sap\HXI\DVEBMGS00\exe\dboraslib.dll' ...
    B  Library 'C:\usr\sap\HXI\DVEBMGS00\exe\dboraslib.dll' loaded
    B  Version of 'C:\usr\sap\HXI\DVEBMGS00\exe\dboraslib.dll' is "700.08", patchlevel (0.115)
    B  New connection 0 created
    M sysno      00
    M sid        HXI
    M systemid   560 (PC with Windows NT)
    M relno      7000
    M patchlevel 0
    M patchno    133
    M intno      20050900
    M make:      multithreaded, Unicode, optimized
    M pid        2052
    M
    M  kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
    M  length of sys_adm_ext is 576 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2052) [dpxxdisp.c   1301]
    I  MtxInit: 30000 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    M  DpShMCreate: sizeof(wp_adm)          18672     (1436)
    M  DpShMCreate: sizeof(tm_adm)          4270848     (21248)
    M  DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    M  DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
    M  DpShMCreate: sizeof(comm_adm)          528064     (1048)
    M  DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    M  DpShMCreate: sizeof(slock_adm)          0     (96)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M  DpShMCreate: sizeof(file_adm)          0     (72)
    M  DpShMCreate: sizeof(vmc_adm)          0     (1544)
    M  DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
    M  DpShMCreate: sizeof(gw_adm)     48
    M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 06D30040, size: 4930904)
    M  DpShMCreate: allocated sys_adm at 06D30040
    M  DpShMCreate: allocated wp_adm at 06D32090
    M  DpShMCreate: allocated tm_adm_list at 06D36980
    M  DpShMCreate: allocated tm_adm at 06D369B0
    M  DpShMCreate: allocated wp_ca_adm at 071494B0
    M  DpShMCreate: allocated appc_ca_adm at 0714F270
    M  DpShMCreate: allocated comm_adm at 071511B0
    M  DpShMCreate: system runs without slock table
    M  DpShMCreate: system runs without file table
    M  DpShMCreate: allocated vmc_adm_list at 071D2070
    M  DpShMCreate: allocated gw_adm at 071D20B0
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated ca_info at 071D20E0
    M  DpShMCreate: allocated wall_adm at 071D20E8
    M  ThTaskStatus: rdisp/reset_online_during_debug 0
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X 
    X Mon Feb 25 15:40:13 2008
    X  <ES> client 0 initializing ....
    X  Using implementation view
    X  <EsNT> Using memory model view.
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    M  ThInit: running on host CDCXI
    M 
    M Mon Feb 25 15:40:14 2008
    M  calling db_connect ...
    C  Prepending C:\usr\sap\HXI\DVEBMGS00\exe to Path.
    C  Oracle Client Version: '10.2.0.2.0'
    C  Client NLS settings: AMERICAN_AMERICA.UTF8
    C  Logon as OPS$-user to get SAPSR3's password
    C  Connecting as /@HXI on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
    C  Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
    C    0 UTF8                                                      1   073217F8   07326E94   0732671C
    C  Attaching to DB Server HXI (con_hdl=0,svchp=07326668,srvhp=07338264)
    C 
    C Mon Feb 25 15:40:15 2008
    C  *** ERROR => OCI-call 'OCIServerAttach' failed with rc=12541
    [dboci.c      4313]
    C  *** ERROR => CONNECT failed with sql error '12541'
    [dbsloci.c    11044]
    C  Try to connect with default password
    C  Connecting as SAPSR3/<pwd>@HXI on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
    C  Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
    C    0 UTF8                                                      1   073217F8   07326E94   0732671C
    C  Detaching from DB Server (con_hdl=0,svchp=07326668,srvhp=07338264)
    C  Attaching to DB Server HXI (con_hdl=0,svchp=07326668,srvhp=07338264)
    C 
    C Mon Feb 25 15:40:16 2008
    C  *** ERROR => OCI-call 'OCIServerAttach' failed with rc=12541
    [dboci.c      4313]
    C  *** ERROR => CONNECT failed with sql error '12541'
    [dbsloci.c    11044]
    B  ***LOG BY2=> sql error 12541  performing CON [dbsh#2 @ 1204] [dbsh    1204 ]
    B  ***LOG BY0=> ORA-12541: TNS:no listener [dbsh#2 @ 1204] [dbsh    1204 ]
    B  ***LOG BY2=> sql error 12541  performing CON [dblink#5 @ 431] [dblink  0431 ]
    B  ***LOG BY0=> ORA-12541: TNS:no listener [dblink#5 @ 431] [dblink  0431 ]
    M  ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1440]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10380]
    M 
    M  Info for wp 0
    M 
    M    stat = WP_RUN
    M    waiting_for = NO_WAITING
    M    reqtype = DP_RQ_DIAWP
    M    act_reqtype = NO_REQTYPE
    M    rq_info = 0
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = 65535
    M    rq_source =
    M    last_tid = 0
    M    last_mode = 0
    M    semaphore = 0
    M    act_cs_count = 0
    M    csTrack = 0
    M    csTrackRwExcl = 0
    M    csTrackRwShrd = 0
    M    mode_cleaned_counter = 0
    M    control_flag = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M    req.vm = no VM
    M    attachedVm = no VM
    M 
    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Server CDCXI_HXI_00 on host CDCXI (wp 0)
    M  *  ERROR       ThInit: db_connect
    M  *
    M  *  TIME        Mon Feb 25 15:40:16 2008
    M  *  RELEASE     700
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          13
    M  *  MODULE      thxxhead.c
    M  *  LINE        10585
    M  *  COUNTER     1
    M  *
    M  *****************************************************************************
    M 
    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   724]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  261]
    M  Entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 2052) [dpnttool.c   327]

  • New system for CS5.5? Some advice please?

      Hi- I am getting a new system built specifically to work with Production Premium CS5.5.
    I'm afraid I know next to nothing about hardware!
    These are some specs that the guys in the shop said would work?
    Do you have any comments- will it work? Any better suggestions?
    Many thanks
    scott
    Gigabyte GA-X58-USB3 Intel X58 Socke1t. 0103 66 on1b5o0a.r00
    Intel Core i7 950 3.06GHz Socket 13616. 080M B Cac2h3e2 .R00
    6 x Corsair Vengeance 4GB DDR3 1600MHz/P6C.30-01 2800 M3e0m.o00
    2 x Western Digital WD20EARS 2TB Hard Dr2i.v0e0 SATAII7 85.400
    COOLERMASTER RC-502 CENTURION 5 II M1I.D0I0 TOWER 6C0A.S0
    OCZ MODXSTREAM PRO 600W SILENT SLI, 1A.T0X02 MODUL6A6R. 00
    XFX Radeon HD6770 1GB GDDR5 PCI-E 2.11. 0G0r aphic1s1 2C.a00
    MS WINDOW 7 HOME PREMIUM 64-BIT 1PK 1O.E0M0 85.00
    LG BLU-RAY 10 X LIGHTSCRIBE BDRW I1N.T0E0R NAL RE7T2A.I00
     

    There are several major problems with that build:
    1) The two WD Green hard drives are too slow for video editing. They spin at only 5400 RPM, not 7200 RPM.
    2) The i7-950 and X58 combo is about to become obsolesced by the new LGA 2011 Sandy Bridge-E platform with the X79 chipset.
    3) Adobe Premiere Pro CS5.x still does not support OpenCL GPU acceleration at all. In fact, the GPU accelerated mode requires an Nvidia CUDA GPU with 896MB or more VRAM in order to even work at all. As a result, the ATi GPU-equipped systems will run CS5.x only in software-only MPE mode, which is much, much slower than the GPU accelerated mode. In other words, the HD 6770 will be equally as slow as integrated motherboard graphics (as far as performance in CS5.x is concerned).
    4) Windows 7 Home Premium will not see anywhere near the full 24GB of RAM. In fact, that OS is capped at 16GB of RAM total. You will need Windows 7 Professional or Ultimate in order to use more than 16GB of RAM.
    5) That 600W PSU is nowhere near powerful enough to run a video editing system of this class. In fact, that OCZ PSU is not even that good quality-wise. You will need a reallty good quality 750W to 850W 80-Plus Gold rated PSU.
    In other words, the guys in the shop know little to nothing about the stuff that they sell.

  • I cannot get GPS Only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off).  Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX

    It seems like I cannot get GPS only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off).  Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX, garmin blueChart mobile, and a GPS monitoring tool. All show no signal. If I turn on cell and wifi,  it says I get gps signal, but can't tell if that is from the GPS chip, or just from cell and wifi only (maybe with some gps mixed in)?  Any ideas on how to get iPad working with GPS only??

    Roger that.  Thanks for your time.
    System:
    Windows 7 64bit
    Processor: AMD phenom IIX4 965
    RAM:  Gskill Ripsaw F3-12800CL7D-4GBRM (2-2GB sticks)
    GPU:EVGA Classified Nvidia GeForce GTX 560 Ti 448 core
    PSU: Kingwin 1000W laser gold (LZG-1000)
    Yes. tried the one ram stick, no go.  I have been trying to boot off/install the windows 7 disk but am unable to get to the point where windows starts installing after its gathering information portion of the install.  I can get to the disk selection screen of the install with the WD HD on SATA port 2 but then get the "cant install messages" when I try to select the Vertex 3.  Yes I can see the Vertex 3 Drive as well as the WD drive at this point.  some times I have to hit "scan" a couple of times.

Maybe you are looking for

  • Choppy videos on Macbook Pro

    Hi, Ever since I updated to mountain lion on my macbook pro 13 inch. All the videos that contain adobe flash player has been choppy. Please Help!

  • Web app not showing in list of webapps

    In my suscription I have 5 websites. I need to change to put one of the websites in a different App service plan, however in the portal.azure.com just shows 3 of the websites, not showing the one I need to move to a different App service plan.

  • Is it possible to use airplay for image and sound via bluetooth speaker for sound?

    I want to play my presentations using airplay, and it works perfectly, but i tried to use my bluetooth speakers at the same time and it doesn't seems possible! Each time i choose the bt speaker on system preferences it disconnects the airplay. Any su

  • Template Mess

    Hi everyone, this is my very first post. I am creating a site with potentially around 1114 pages. I have started using templates in dreamweaver for the first time and I have run into a small problem (i hope it's small). I began the template to create

  • Air 1.5 webkit : supports image data uri?

    The release notes don't include much about the new version of Webkit in Air 1.5. Does anyone know if the new version of webkit includes support for the image src data uri scheme?