System freeze after sleep mode
Some times after I click my mouse after system went to energy savings mode, the carosell will start spinning and nothing happens. The system gets completely frozen and my MBP has been this way since I got it (Late 2011). I get through this by pressing power button to hard shut off the computer. When it's booting up it always takes a little longer, not sure if that's interesting or not. Also, some times when system is booting it stops and gets this folder with a blinking question mark in it. This, also has been an out-of-box flaw. I tried reinstalling the entire system but that didn't do much.
I probably shoud've went to apple store right when this happened the first time but at that time there was none in Sweden, that left me with the option of turning the computer in at a apple reseller for trouble shooting. They didn't offer a computer in the mean while so that didn't appeal to me at the time.
Any thoughts on this would be greatly appriciated!
I'm not a super expert but I recommend to try the followings:
1. Open Disk Utility and click Repair Disk Permissions for your Macintosh HD to check if there were any errors.
2. Reinstall OS X by pressing Command + R on startup
3. Erase your hardrive totally and install OS X again.
Similar Messages
-
Hello,
Since I've updated to Tiger, the system always crashes after getting back from sleep mode, upon trying to use Firefox or Thunderbird. I can't even restart using alt-apple-esc and will have to use the power button.
Has anyone experienced the same problem? Does anyone know a solution to that problem?
Thanks a lot in advance!!
Additional info:
I'm using airport to connect to the internet (DSL connection with a Zyxel Prestige 600 Router).
Firefox 1.5.0.2; Thunderbird 1.5; Norton Internet Security 3.0
imac g5 Mac OS X (10.4.6)Hi Pat,
just checked. Firefox is running java 0.9.5
Then you're OK with that...
However upon checking the java version on my mac, I got the following answer: "Exception in thread "main" java.lang.NoClassDefFoundError: version".
What does that mean? How to fix it?
However, there's something wrong with your Java installation:
A NoClassDefFoundError is thrown when a classloader or the Java Virtual Machine tries to load a class and no definition of the class can be found. This could happen when using the new expression or during a normal method call. The reason this would occur at runtime is because the missing class definition existed when the currently executing class was compiled, but now that definition cannot be found.
If that sounds to geeky, then just check (via Software Update) if you're running the latest version of Java or if there's an update waiting to be installed in your system
Did you notice any other problematic Java-related behaviour?
Safari runs OK?
Did you take all the appropriate steps before upgrading to 10.4.6? What version have you been runnig before 10.4.6?
Macs running 9.x, Macs running 10.4.x and SGI workstations running Irix 6.5.x -
My Macbook Pro I5 freezes after sleep mode....help!!.
Please can somebody help me with this problem. I bought my new Macbook Pro three months ago, and this happened two times....I put Macbook in sleep mode and after that it freezes completely. I hear that it is still working but the screen goes just black. No button works and neither the mouse. Everytime I have to switch it off and on with the risk of damaging it. Is there a way to solve this problem?. Please let me know.
Take it in for service while it's under warranty.
+In the future please post in the right forum. This is the MacBook forum, but you state you have a MacBook Pro. There is a separate forum for MBPs.+ -
Mac Mini (late 2012) freezes after sleep mode
My Mac Mini (2.5 GHz Intel Core i5) will not respond or wake from sleep. I can press the power button and the screen appears but my mouse and keyboard is frozen and I am unable to anything except hold the power button to shut it down. This is a recent occurrence over the last 2-3 months. It was sporadic but now it seems to be every time.
I saw one thread that suggested it may be a problem with the memory upgrade. I upgraded the 2GB (1GBx2) to 8GB (4GBx2) when I purchased the Mac Mini in November and just started having the problem recently. The memory is PNY 1333 MHz DDR3 memory modules.
I've reinstalled Mountain Lion and ran several permission repairs with Apple Disk Utility and Drive Genius. I have also run several different Virus scans and nothing unusual was found.
Any help would be appreciated.Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
Hello. My mac pro early 2008 restarts after sleep mode and it works slower. I tested it with apple hardwear test and it seems to be ok. Thank you.
Try this:
clone your system and repair it with Disk Warrior instead
Or try a clean test system install on another drive
A must: SmcFanControl 2.2 - a mere 400 rpm extra to keep air cooling up
Try to run w/o externals. MyBook included.
Is that a 7200.11 1TB? they had a lot of issues.
Run AHT off your OEM DVD.
2008 had to have EFI and SMC updates to deal with freezes on wake from sleep, and like all models, high inrush current. Hopefully you have a UPS and is 1500VA unit.
When you do hard restart from power button, you almost certainly add more directory errors and to files requiring immediate attention to repair and rebuild the directory; and to scan and repair and delete cache and temp files and folders. A must. Invest in bootable backups SuperDuper along with Disk Warrior (or TechTool Pro 6, maybe Drive Genius 3 but I'd rate that #3).
TimeMachine has its own bad habits, especially with Green drives and some externals.
Try to rule out everything and then add back one at a time.
And it may just be time to replace the 8800, very common, a couple threads this week, and it is 3 yrs old. Might want ATI 5870 or 5770. -
Brand new home built system (all new components unless noted otherwise) running Windows 7 64-bit Home Premium on the following hardware:
MSI X58 Pro-E motherboard,
Intel Core i7-920 (2.66) CPU,
Enermax PRO82+ 525W powersupply,
Sapphire ATI HD5670 1GB GDDR5 PCI-E video,
8GB Corsair 1333MHz RAM,
WD Velociraptor 150GB 10,000 RPM boot drive,
WD 500GB Caviar Black for file storage,
Plextor DVD-RW,
CoolerMaster case.
Older Viewsonic VP2030B monitor,
Older Microsoft Desktop 6000 V2 keyboard/mouse.
With standard Windows 7 power saving features enabled, the following
intermittent problems occur:
After the system has gone into sleep mode, the video card provides no signal to the monitor. Moving the mouse or touching keys on the keyboard obviously bring the system back out of sleep mode, but no video signal is received. Unplugging the DVI-D
cable from the card results in the Windows sound indicating a change. Plugging it back in, results in a Windows sound indicating the change. This happens when you unplug one end of the cable, it doesn't matter if it is at the monitor end or the video card
end - as long as the other end is of course still plugged in. The only resolution to this "no video" state is to reboot the computer with the power or reset button.
On some occasions when turning the PC on, there is no video signal. The system boots properly (although the BIOS screen takes about 15 seconds to appear - something MSI says is OK), and can be shut down with the correct keyboard sequence. The monitor
runs through VGA, DVI-A and DVI-D, but no signal is ever received so it goes into standby mode.
When the computer boots properly, usually while it is still loading Outlook (which is set to start automatically), the screen goes completely blank for 5 or more seconds, then comes back on and the monitor menu indicates that it is running at the correct
resolution, and then the video works correctly from there on in - unless it goes to sleep.
On some occasions, when recovering from a "no video after sleep mode" incident, everything on the screen has been moved towards the upper left side of the screen. The Outlook window which is normally quite large (80%) and centred on the screen has been reduced
in size to about 50% and shoved into the top left corner. Also, the 4 gadgets that normally run vertically along the right side of the screen have been moved up and towards the middle of the screen, one or two of them often overlap others.
Things I have done/tried:
All Windows 7 updates,
All motherboard BIOS updates,
All video card drivers and software updates from ATI,
Replaced the DVI-D cable,
Uninstalled the video card and drivers, and moved the card to a different PCI-E slot,
Replaced the video card with another Sapphire ATI HD5450 card (temporarily).
Sapphire thinks it's a hardware problem with the original card, but since temporarily replacing it with another card, the problems continue, so I doubt that is the issue. (Plus I have to pay $25 to ship the apparently defective - under warranty card - back
to them.)
These problems have happened intermittently since the system was built in January 2010 and they seem to be quite random, sometimes not happening for weeks, other times happening every few days. Sometimes the system is in sleep mode for 1/2 hour and it happens,
other times it is in sleep mode for hours and it happens (or doesn't).
Any help would be appreciated.Hi again,
OK, I finally got around to trying this. I still have to check if that actually fixed it, but I managed to get into the "Factory" OSD screen.
I had my system running, disconnected my new monitor and plugged in the flaky old Viewsonic. I then:
1. Depressed and held down the #2 button, then depressed and held down the Power button,
2. Almost immediately the amber power light turned-on, the backlight turned on and the output image from the PC showed up.
3. The On Screen Display (OSD) for all the monitor setting came up (at the bottom of the screen instead of the middle where it normally is), and underneath the Main Menu window in the OSD, along the bottom of the overall OSD window, the word "Factory" appears
in the middle between the control button keys (#1 for exit, and #2 for enter). (It's not normally there.)
4. Using the down arrow key on the face of the monitor, I highlighted the "Factory" menu item, pressed the #2 key and voula! there was a whole new simple white text on bright blue background window, which among all sorts of settings included "Factory Reset"
(which is the default selection).
5. I pressed #2 again to accept and it was done.
All that is left is to do is some user testing to see if the monitor behaves as new.
Additional informtion: in the top of the "Factory" menu it reads: "LOVP AU Ver.0.36"
I took photos of everything and will post them on my Flickr account. To find them go to wwww.flickr.com, click on the search button, then on the next screen click on the People tab, enter my name and click search.
Thanks again for the advice.
Tom -
Satellite Pro A210 PSAFHE - Windows 7 - freezes after sleep/hibernate
I have a Satellite Pro A210 PSAFHE running dual boot Windows XP/7
Using Windows 7 - either 32 or 64 - the system always freezes after sleep/hibernate.
This never happens with XP which sleeps and hibernates OK..
There are no drivers at all for this notebook on the site http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU
I like System 7 and use it on my other computers but without sleep/hibernate I will revert to XP.Hi
> There are no drivers at all for this notebook on the site http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU
Sorry mate but you are wrong.
All Win 7 drivers for Satellite Pro A210 are released on the Toshiba European driver page I recommend checking it again
Since this issue does not appear using Win XP, I can say for sure that this has nothing to do with the hardware but its a software related issue
I recommend updating the graphic card driver
Furthermore there is a new BIOS for Sat Pro A210 PSAFHEits v2.0
Check if you are using the latest version -
[SOLVED] System freeze after upgrade linux-3.12.9-2 to linux-3.13.4-1
After upgrading from kernel 3.12.9 to 3.13.4 (booth x86_64 architecture) i detected system freeze after round about 0.5s of the login screen about 80% of the time.
So i first thought it coulbe be the the ati driver and uninstalled that via livecd/chroot.
But the same thing happens in comand line only mode.
Afterwards i setup at ssh server to get into the maschine if it is still running, but is was also not responding to that.
Downgrading to 3.12.9 solved the issue. In journalctl i could not find any usefull information.
Last edited by schlumpfimsumpf (2014-04-10 19:16:57)Me wrote:
It is same for me. Wont boot, and crash before I can write mine pass to text screen. I use lts at now.
H/W path Device Class Description
===============================================
system GA-970A-UD3
/0 bus GA-970A-UD3
/0/0 memory 128KiB BIOS
/0/4 processor Athlon
/0/4/a memory 128KiB L1 cache
/0/4/c memory 2MiB L3 cache
/0/b memory 128KiB L1 cache
/0/29 memory 8GiB System Memory
/0/29/0 memory DIMM 1600 MHz (0,6 ns) [empty]
/0/29/1 memory DIMM 1600 MHz (0,6 ns) [empty]
/0/29/2 memory 4GiB DIMM 1600 MHz (0,6 ns)
/0/29/3 memory 4GiB DIMM 1600 MHz (0,6 ns)
/0/100 bridge RD890 PCI to PCI bridge (external gfx0 port B)
/0/100/0.2 generic RD990 I/O Memory Management Unit (IOMMU)
/0/100/2 bridge RD890 PCI to PCI bridge (PCI express gpp port B)
/0/100/2/0 display GF106 [GeForce GTS 450]
/0/100/2/0.1 multimedia GF106 High Definition Audio Controller
/0/100/4 bridge RD890 PCI to PCI bridge (PCI express gpp port D)
/0/100/4/0 bus EJ168 USB 3.0 Host Controller
/0/100/4/0/0 usb3 bus xHCI Host Controller
/0/100/4/0/0/2 storage ADATA USB Flash Drive
/0/100/4/0/1 usb2 bus xHCI Host Controller
/0/100/9 bridge RD890 PCI to PCI bridge (PCI express gpp port H)
/0/100/9/0 eth0 network RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
/0/100/a bridge RD890 PCI to PCI bridge (external gfx1 port A)
/0/100/a/0 bus EJ168 USB 3.0 Host Controller
/0/100/a/0/0 usb8 bus xHCI Host Controller
/0/100/a/0/1 usb7 bus xHCI Host Controller
/0/100/11 storage SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]
/0/100/12 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
/0/100/12/1 usb6 bus OHCI Host Controller
/0/100/12/1/5 input M Dongle
/0/100/12.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller
/0/100/12.2/1 usb1 bus EHCI Host Controller
/0/100/13 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
/0/100/13/1 usb9 bus OHCI Host Controller
/0/100/13/1/1 input USB Receiver
/0/100/13.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller
/0/100/13.2/1 usb4 bus EHCI Host Controller
/0/100/14 bus SBx00 SMBus Controller
/0/100/14.2 multimedia SBx00 Azalia (Intel HDA)
/0/100/14.3 bridge SB7x0/SB8x0/SB9x0 LPC host controller
/0/100/14.4 bridge SBx00 PCI to PCI Bridge
/0/100/14.4/7 multimedia SAA7134/SAA7135HL Video Broadcast Decoder
/0/100/14.4/e bus VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller
/0/100/14.5 bus SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
/0/100/14.5/1 usb10 bus OHCI Host Controller
/0/100/15 bridge SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0)
/0/100/16 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
/0/100/16/1 usb11 bus OHCI Host Controller
/0/100/16/1/3 multimedia USB Web Camera
/0/100/16/1/4 multimedia USB Sound Device
/0/100/16.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller
/0/100/16.2/1 usb5 bus EHCI Host Controller
/0/101 bridge Family 15h Processor Function 0
/0/102 bridge Family 15h Processor Function 1
/0/103 bridge Family 15h Processor Function 2
/0/104 bridge Family 15h Processor Function 3
/0/105 bridge Family 15h Processor Function 4
/0/106 bridge Family 15h Processor Function 5
/1 scsi6 storage
Working again. I think problem was the partition was full.
Last edited by gyurman (2014-04-13 07:51:22) -
Macbook pro runs really slow after sleep mode
My MBP ( MacBook Pro (13-inch, medio 2012), 2,5 GHz Intel Core i5, 8 GB 1600 MHz DDR3, Intel HD Graphics 4000 1024 MB), runs very slow after sleep mode. I notice that when I wake it up, my memory usage is nearly 8 GB. After a restart it is back no a normal level, between 2 and 5 GB depending on how many programs I am running. Any ideas what causes this? My IOS is Yosemite 10.10.2
Kind regardsHi Japib
Thanks for your reply. Here is my report:
Problem description:
macbook pro is really slow after sleep mode
EtreCheck version: 2.1.8 (121)
Report generated 4 februari 2015 20:56:34 CET
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Technical Specifications)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 172
Video Information: ℹ️
Intel HD Graphics 4000
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: 1:36:41
Disk Information: ℹ️
APPLE HDD TOSHIBA MK5065GSXF disk0 : (500,11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 498.88 GB (292.17 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Application Support/Hotspot Shield
[not loaded] com.anchorfree.tun (1.0.1) [Click for support]
/Library/Application Support/Kaspersky Lab/KAV/Bases/Cache
[loaded] com.kaspersky.kext.kimul.44 (44) [Click for support]
[loaded] com.kaspersky.kext.mark.1.0.5 (1.0.5) [Click for support]
/Library/Extensions
[loaded] com.kaspersky.kext.klif (3.0.4a41) [Click for support]
[loaded] com.kaspersky.nke (1.6.4a15) [Click for support]
/System/Library/Extensions
[loaded] com.hzsystems.terminus.driver (4) [Click for support]
[not loaded] com.olympus.CamBlockCommandsDeviceUP (3.1.0 - SDK 10.6) [Click for support]
[not loaded] com.roxio.BluRaySupport (1.1.6) [Click for support]
[not loaded] com.sony.driver.prs2 (1.0.3d1) [Click for support]
[not loaded] com.wacom.kext.pentablet (5.3.3 - SDK 10.8) [Click for support]
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) [Click for support]
Launch Agents: ℹ️
[running] com.epson.Epson_Low_Ink_Reminder.launcher.plist [Click for support]
[failed] com.epson.esua.launcher.plist [Click for support] [Click for details]
[running] com.epson.eventmanager.agent.plist [Click for support]
[running] com.kaspersky.kav.gui.plist [Click for support]
[not loaded] com.sony.ReaderDesktop.RunReaderDesktop.plist [Click for support]
[not loaded] com.trusteer.rapport.rapportd.plist [Click for support]
[running] com.wacom.pentablet.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.anchorfree.ajaxserver.plist [Click for support]
[running] com.kaspersky.kav.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Click for support]
[running] com.trusteer.rooks.rooksd.plist [Click for support]
[loaded] com.tunnelbear.mac.tbeard.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Click for support]
[running] com.spotify.webhelper.plist [Click for support]
[loaded] com.valvesoftware.steamclean.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Programma (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Documenten Map (/Users/[redacted]/Documents)
uTorrent UNKNOWN (missing value)
BambooCore UNKNOWN (missing value)
BambooCore UNKNOWN (missing value)
BambooCore UNKNOWN (missing value)
BambooCore UNKNOWN (missing value)
BambooCore UNKNOWN (missing value)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: Java 7 Update 60 Check version
WacomNetscape: Version: 2.1.0-1 - SDK 10.8 [Click for support]
Default Browser: Version: 600 - SDK 10.10
WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 [Click for support]
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.296 - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.296 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Click for support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
MeetingJoinPlugin: Version: Unknown - SDK 10.6 [Click for support]
User internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.1 [Click for support]
Safari Extensions: ℹ️
AdBlock
DuckDuckGo
Save to Pocket
Awesome Screenshot
URL Advisor
Virtual Keyboard
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Squeezebox [Click for support]
Trusteer Endpoint Protection [Click for support]
Time Machine: ℹ️
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 498.88 GB Disk used: 206.70 GB
Destinations:
My Passport [Local]
Total size: 999.83 GB
Total number of backups: 17
Oldest backup: 2013-11-06 17:55:38 +0000
Last backup: 2014-10-14 11:30:39 +0000
Size of backup disk: Adequate
Backup size 999.83 GB > (Disk used 206.70 GB X 3)
Top Processes by CPU: ℹ️
15% mds
5% WindowServer
0% ocspd
0% fontd
0% kav
Top Processes by Memory: ℹ️
223 MB kav
198 MB Safari
155 MB Mail
137 MB mds_stores
77 MB WindowServer
Virtual Memory Information: ℹ️
3.45 GB Free RAM
3.05 GB Active RAM
1.11 GB Inactive RAM
974 MB Wired RAM
1.64 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Feb 4, 2015, 07:21:16 PM /Users/[redacted]/Library/Logs/DiagnosticReports/EPSON Software Updater Agent_2015-02-04-192116_[redacted].crash
Feb 4, 2015, 07:18:08 PM Self test - passed
Hope this will shed some light on the problem. -
Nokia won't wake up after sleep mode! ( Work aroun...
WCH1.... Posted this in my first thread
Found this somewhere, and it worked for me.
Freezing in sleep mode:
Go to the device manager (you can go to control panel and click on SYSTEM and then device manager will be in the upper left corner). Go to the very bottom and find Universal Serial Bus controllers.
Click on the arrow next to it and it will reveal 2 "USB Root Hub" devices. Double click (or double tap).
On each one, choose Power Management tab from the top. Uncheck "Allow the computer to turn off this device to save power". Then click on OK.
Be sure to do this on both device ISB Root Hub listings. ( The Credit is not mine) but much needed because they keep posting in my first thread !Well my solution may not be the most cientific one but it works for me (at least until the real solution comes to the public)...
My computer has the problem that when it goes to sleep mode she never comes back... but it the screen that does not comes back... all the system is workin in behind (its like the brightness level was set on the less power possible) so i had to turn off the computer and had to do for a long time some times i had to wait that the computer cooled off a little and then try again to turn it on... I some tried things that the support page of apple said it could be... but did worked out... i dont know i think is a problem over 2 factors...
1. heating (the screen generates to many heat but, TO MANY!)
2. tiger os the OS "sleep mode" (it knows that the screen its heating a lot and tries to go to sleep to prevent over heating and damage)
So based on this i tried conecting a external monitor to the computer while she was unable to "awake" (or to show some thing in the screen)... and it worked whit no problem at all... so my conclusion was to prevent the over heating (1st factor) and the sleep mode (2nd factor)... so I deactivated the sleep mode setting up the computer to a never sleep mode... and to prevente the over heating well I use a low bright and when i need more brightness (to se the colors of what im doing or some thing like that) I use high brightness... when I away I set the brightness level to no brightness so there is no over heat and no sleep mode (cus if it is deactivated and it over heats it will go to sleep anyway...
Soooooo....
1. deactivate Sleep mode...
2. Activate a Screen saver...
3. And remember to contro your brightness your self... and turn it off when you are not using your computer...
well i hope it works for some body :P cya... -
Monitor won't wake up after sleep mode
Does anyone know how to fix the monitor, so it starts up after sleep mode? When my computer comes out of sleep mode the monitor doesn't always come on. Does anyone else have this problem and do you know the cause? The computer is only a few months old and hadn't had any problems.
Thanks,
ShaneilWell my solution may not be the most cientific one but it works for me (at least until the real solution comes to the public)...
My computer has the problem that when it goes to sleep mode she never comes back... but it the screen that does not comes back... all the system is workin in behind (its like the brightness level was set on the less power possible) so i had to turn off the computer and had to do for a long time some times i had to wait that the computer cooled off a little and then try again to turn it on... I some tried things that the support page of apple said it could be... but did worked out... i dont know i think is a problem over 2 factors...
1. heating (the screen generates to many heat but, TO MANY!)
2. tiger os the OS "sleep mode" (it knows that the screen its heating a lot and tries to go to sleep to prevent over heating and damage)
So based on this i tried conecting a external monitor to the computer while she was unable to "awake" (or to show some thing in the screen)... and it worked whit no problem at all... so my conclusion was to prevent the over heating (1st factor) and the sleep mode (2nd factor)... so I deactivated the sleep mode setting up the computer to a never sleep mode... and to prevente the over heating well I use a low bright and when i need more brightness (to se the colors of what im doing or some thing like that) I use high brightness... when I away I set the brightness level to no brightness so there is no over heat and no sleep mode (cus if it is deactivated and it over heats it will go to sleep anyway...
Soooooo....
1. deactivate Sleep mode...
2. Activate a Screen saver...
3. And remember to contro your brightness your self... and turn it off when you are not using your computer...
well i hope it works for some body :P cya... -
Desktop computer crashes after sleep mode since upgrade to Snow Leopard
Since I upgraded my power Mac to Snow Leopard in December, I've had nothing but problems, all of which appear to stem from when it comes out of sleep mode. This computer and all applications were rock solid in Leopard! I also have a mac book running identical programs and that IS rock solid on Snow Leopard. I have a 2 x 2.8 GHz Quad Core Intel Xeon processor with 10 GB ram.
I did a complete re-install of SL and all programs as per the Apple instructions.
Basically, the computer crashes after sleep mode. I've tried all the fixes I've read on the net. Here is the report thread from the last crash. Does it mean anything or throw any light on the problem to anyone?
Thanks,
David Wright
Interval Since Last Panic Report: 14 sec
Panics Since Last Report: 1
Anonymous UUID: A8309844-77B4-45E9-AB36-6AF2850B84A0
Tue Jan 19 13:01:16 2010
panic(cpu 4 caller 0x2a7ac2): Kernel trap at 0x8722a3a1, type 14=page fault, registers:
CR0: 0x80010033, CR2: 0x00000000, CR3: 0x00100000, CR4: 0x00000660
EAX: 0x87e7a81c, EBX: 0x87e7a804, ECX: 0x10a2dd00, EDX: 0x00000000
CR2: 0x00000000, EBP: 0x87e7a7a8, ESI: 0x000001f8, EDI: 0xffc21000
EFL: 0x00010202, EIP: 0x8722a3a1, CS: 0x00000008, DS: 0x00000010
Error code: 0x00000000
Backtrace (CPU 4), Frame : Return Address (4 potential args on stack)
0x87e7a598 : 0x21b2bd (0x5cf868 0x87e7a5cc 0x223719 0x0)
0x87e7a5e8 : 0x2a7ac2 (0x591c30 0x8722a3a1 0xe 0x591dfa)
0x87e7a6c8 : 0x29d968 (0x87e7a6e0 0x246 0x87e7a7a8 0x8722a3a1)
0x87e7a6d8 : 0x8722a3a1 (0xe 0x48 0x10 0x290010)
0x87e7a7a8 : 0x8722f604 (0x10a2dd00 0x112e48c4 0x1 0x87e7a7e4)
0x87e7a838 : 0x8722ad60 (0x20d83400 0x10a2dd00 0x87e7a86f 0x0)
0x87e7a888 : 0x87306953 (0x10a2dd00 0x2 0x0 0xffffffff)
0x87e7a8e8 : 0x87789a40 (0x129f0d00 0xff91b80 0x1f8 0x2)
0x87e7a978 : 0x87788845 (0x6f40c004 0x12 0x7 0x2)
0x87e7aa48 : 0x87d92525 (0x159a3e00 0x30006 0x12493004 0x159a3e00)
0x87e7aa68 : 0x87d92413 (0x159a3e00 0x87d9e8a0 0x1 0x0)
0x87e7aa98 : 0x87d97df2 (0x159a3e00 0x12493000 0x5ac000 0x1)
0x87e7aad8 : 0x549661 (0x12493000 0x0 0x0 0x0)
0x87e7ab28 : 0x87d958d8 (0x10675f40 0x87d95df0 0x0 0x0)
0x87e7ab58 : 0x5638fc (0x12493000 0x87e7ab80 0x87e7ab84 0x87e7ab88)
0x87e7abd8 : 0x563c74 (0x11d8534c 0x12493000 0x20e35c90 0x0)
0x87e7ac28 : 0x564554 (0x12493000 0x3 0x87e7ac70 0x0)
0x87e7ad48 : 0x284797 (0x12493000 0x3 0x20e35c90 0x0)
0x87e7bdf8 : 0x21d65f (0x20e35c68 0x20c165a0 0x1fd2a0 0x5b17)
0x87e7be38 : 0x2107f7 (0x20e35c00 0x0 0x11434030 0x20e188f0)
Backtrace continues...
Kernel Extensions in backtrace (with dependencies):
com.RME.driver.FirefaceAudioDriver(2.64)@0x87785000->0x8778dfff
dependency: com.apple.iokit.IOAudioFamily(1.7.2fc1)@0x87d8d000
dependency: com.apple.iokit.IOFireWireFamily(4.1.7)@0x872ed000
com.apple.iokit.IOAudioFamily(1.7.2fc1)@0x87d8d000->0x87da4fff
dependency: com.apple.kext.OSvKernDSPLib(1.3)@0x87cf7000
com.apple.driver.AppleFWOHCI(4.4.0)@0x87221000->0x87246fff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x7dfa3000
dependency: com.apple.iokit.IOFireWireFamily(4.1.7)@0x872ed000
com.apple.iokit.IOFireWireFamily(4.1.7)@0x872ed000->0x8732ffff
BSD process name corresponding to current thread: QTKitServer
Mac OS version:
10C540
Kernel version:
Darwin Kernel Version 10.2.0: Tue Nov 3 10:37:10 PST 2009; root:xnu-1486.2.11~1/RELEASE_I386
System model name: MacPro3,1 (Mac-F42C88C8)
System uptime in nanoseconds: 82873577512931
unloaded kexts:
com.apple.driver.AudioAUUC 1.0 (addr 0x878f1000, size 0x16384) - last unloaded 82669937654216
loaded kexts:
com.RME.driver.FirefaceAudioDriver 2.64 - last loaded 82552224025300
com.paceap.kext.pacesupport.snowleopard 5.7.2
tc.tctechnologies.driver.AlesisFirewire 6300
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleHWSensor 1.9.2d0
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.iokit.CHUDUtils 201
com.apple.driver.AppleUpstreamUserClient 3.1.0
com.apple.iokit.CHUDProf 214
com.apple.kext.ATIFramebuffer 6.0.6
com.apple.driver.AppleIntelPenrynProfile 17
com.apple.ATIRadeonX2000 6.0.6
com.apple.driver.AudioIPCDriver 1.1.2
com.apple.driver.AppleHDA 1.7.9a4
com.apple.driver.AppleIntel8254XEthernet 2.1.1b7
com.apple.driver.AirPortBrcm43xx 421.91.26
com.apple.driver.AppleUSBDisplays 2.2
com.apple.driver.AppleMCEDriver 1.1.9
com.apple.driver.Apple_iSight 4.0.1
com.apple.driver.ACPISMCPlatformPlugin 4.0.1d0
com.apple.driver.AppleLPC 1.4.9
com.apple.iokit.SCSITaskUserClient 2.6.0
com.apple.iokit.IOAHCIBlockStorage 1.6.0
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleUSBHub 3.8.4
com.apple.driver.AppleFWOHCI 4.4.0
com.apple.driver.AppleUSBEHCI 3.7.5
com.apple.driver.AppleAHCIPort 2.0.1
com.apple.driver.AppleIntelPIIXATA 2.5.0
com.apple.driver.AppleEFINVRAM 1.3.0
com.apple.driver.AppleUSBUHCI 3.7.5
com.apple.driver.AppleACPIButtons 1.3
com.apple.driver.AppleRTC 1.3
com.apple.driver.AppleHPET 1.4
com.apple.driver.AppleSMBIOS 1.4
com.apple.driver.AppleACPIEC 1.3
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 96.0.0
com.apple.security.sandbox 0
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagement 96.0.0
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOSurface 73.0
com.apple.iokit.IOBluetoothSerialManager 2.2.4f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.CHUDKernLib 207
com.apple.driver.DspFuncLib 1.7.9a4
com.apple.iokit.IONDRVSupport 2.0
com.apple.kext.ATI2600Controller 6.0.6
com.apple.kext.ATISupport 6.0.6
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IO80211Family 310.6
com.apple.iokit.IONetworkingFamily 1.9
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleHDAController 1.7.9a4
com.apple.iokit.IOGraphicsFamily 2.0
com.apple.iokit.IOHDAFamily 1.7.9a4
com.apple.iokit.IOAudioFamily 1.7.2fc1
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleSMC 3.0.1d2
com.apple.driver.IOPlatformPluginFamily 4.0.1d0
com.apple.driver.CSRUSBBluetoothHCIController 2.2.4f3
com.apple.driver.AppleUSBBluetoothHCIController 2.2.4f3
com.apple.iokit.IOBluetoothFamily 2.2.4f3
com.apple.driver.AppleUSBHIDMouse 1.4.0d7
com.apple.driver.AppleHIDMouse 1.4.0d7
com.apple.driver.AppleUSBHIDKeyboard 1.2.0a3
com.apple.iokit.IOUSBHIDDriver 3.8.4
com.apple.driver.AppleHIDKeyboard 1.2.0a3
com.apple.driver.AppleUSBMergeNub 3.8.5
com.apple.driver.AppleUSBComposite 3.7.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.0
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOATAPIProtocolTransport 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.0
com.apple.iokit.IOUSBUserClient 3.8.5
com.apple.iokit.IOFireWireFamily 4.1.7
com.apple.iokit.IOAHCIFamily 2.0.2
com.apple.iokit.IOATAFamily 2.5.0
com.apple.iokit.IOUSBFamily 3.8.5
com.apple.driver.AppleEFIRuntime 1.3.0
com.apple.iokit.IOHIDFamily 1.6.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.TMSafetyNet 6
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 281
com.apple.iokit.IOStorageFamily 1.6
com.apple.driver.AppleACPIPlatform 1.3
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacPro3,1, BootROM MP31.006C.B05, 8 processors, Quad-Core Intel Xeon, 2.8 GHz, 10 GB, SMC 1.25f4
Graphics: ATI Radeon HD 2600 XT, ATI Radeon HD 2600, PCIe, 256 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.91.26)
Bluetooth: Version 2.2.4f3, 2 service, 1 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en2
PCI Card: ATI Radeon HD 2600, Display, Slot-1
Serial ATA Device: WDC WD10EADS-00P8B0, 931.51 GB
Serial ATA Device: ST3500630AS, 465.76 GB
Serial ATA Device: ST3500630AS, 465.76 GB
Serial ATA Device: WDC WD10EADS-00P8B0, 931.51 GB
Parallel ATA Device: OPTIARC DVD RW AD-7170A
USB Device: Hub, 0x05ac (Apple Inc.), 0x912f, 0xfd500000
USB Device: Apple Cinema HD Display, 0x05ac (Apple Inc.), 0x9221, 0xfd520000
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0608, 0xfd300000
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0608, 0xfd340000
USB Device: ProtectExecuter, 0x0819, 0x0101, 0xfd344000
USB Device: iLok, 0x088e, 0x5036, 0xfd343000
USB Device: MS-20 Controller, 0x0944, 0x0101, 0xfd341000
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfd310000
USB Device: Apple Optical USB Mouse, 0x05ac (Apple Inc.), 0x0304, 0xfd313000
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0221, 0xfd312000
USB Device: USB2.0 Printer (Hi-speed), 0x04b8 (Seiko Epson Corp.), 0x0007, 0xfd200000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8206, 0x5d200000
FireWire Device: Vendor 0xA35 Device 0x101800, 0xA35, Up to 400 Mb/sec
FireWire Device: built-in_hub, Up to 800 Mb/sec
FireWire Device: iSight, Apple Computer, Inc., Up to 200 Mb/sec
FireWire Device: unknown_device, Unknowndavidadmusic wrote:
The problem has been identified as the RME fireface400 audio driver. I've spent some considerable time experimenting to identify the culprit. It's clear that this is what is causing all my problems since Snow Leopard. Whether it's exclusively the drivers fault or partly also due to a conflict with apple SL, I don't know, but I have crash reports if apple want to see them.
From your first post, it appears you are using Fireface audio driver version 2.64. RME released a new Snow Leopard compatible driver (version 2.65) last December. It is available at RME: Downloads. (There is also a firmware updater for the Fireface 400 there, which you might want to check out.)
It isn't at all unusual for a new OS version to require new drivers for third party hardware. References to this can be found all over the web, in "read me" files & other documentation, etc. -- it doesn't just apply to OS X but to Windows & other OS's as well. (One of the biggest problems with Vista was poor third party driver support.) In fact, the X-Lab "Resolving Kernel Panics" article specifically cautions users to make sure all such drivers are current. See section 6.1 of that article for more details.
I don't know if you missed all this somehow, but if you haven't already downloaded & installed the new RME driver (& possibly the firmware update as well), then do so now. While you are at it, check for other similar updates for any other third party hardware devices you use, using the info in section 6.1 of the X-Lab article as a guide.
Hopefully, this will resolve your issue, which (as already mentioned) is kernel panics, not crashes. If you still have problems, post more about them, being mindful of the difference between application crashes & kernel panics. Because they are fundamentally different, they have different cures, so we will need to know which type they are to offer effective help. -
Lion autoconnecting after sleep mode, lion autoconnecting after sleep mode
It's really frustrating that my Mac 9/10 times won't reconnect after sleep mode.
Is there something I can download to fix this please.This should be filed under "What Worked for Me". For me this turned out to be a simple fix for a tough problem. Maybe someone else can benefit from my experience so I'm dropping this into the forum to be searchable.
The short answer is to try putting your WiFi station on a low channel number. It fixed my reconnect problem permanently. I can only speculate about why this works, but it's easy to try.
Long version- Fails to autoconnect after sleep, own station not listed in wifi dropdown list.
After almost a year of flawless reconnect, my iMac* suddenly began failing to reconnect or even list my SSID after waking from sleep. It showed everything else in the neighborhood, but my own station had been blacklisted somehow.
I could get a connection eventually, but it took 10 or 20 or more on/off cyles of the wifi radar symbol. It got to be very annoying. All the other computers including macs and PCs and ipads that visit my house had no problem. This included a MacBook with the same operating system (but a different wifi card).
I didn't write anything down at first so I'm not sure if it was triggered by an update. It might have started after some of my neighbors bought new routers.
I tried all the suggestions I could find on all the forums, including clearing the keys from key manager, clearing the preferred stations, etc. No luck. Sometimes it would reconnect immediately but the next time it could be very stubborn.
I knew I was getting closer to the snag when I read about 802.11d and country codes. I looked in the system log (kernel.log) with the console and found these lines repeated:
Mar 23 11:49:52 ZZZZZ-iMac kernel[0]: 72833.117059: performCountryCodeOperation: Not connected, scan in progress[0]
Mar 23 11:49:53 ZZZZZ-iMac kernel[0]: en1: 802.11d country code set to 'TW '.
Mar 23 11:49:53 ZZZZZ-iMac kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 56 60 64 149 153 157 161
I definitely do not live in 'TW '.
The number of times this message appeared exactly matched the number of retries that were necessary. The last entry would have my own country code (Finland) and a much longer list of supported channels:
3/25/13 3:10:21.000 kernel: en1: 802.11d country code set to 'FI '.
3/25/13 3:10:21.000 kernel: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
There are three (illegal ?) routers in my neighborhood advertising TW as the country. (Taiwan maybe?) I discovered how to see the country codes from my neighbors' routers:
(Apple) -> About This Mac -> More info… -> System Report … -> Wi-Fi
Press the Wi-Fi label in the list on the left, not the one on the right-hand side that shows if you hit "Network".
I have an Airport Extreme dual band, and had the 2.4 Ghz on channel 13 and the 5 Ghz on channel 48, to stay clear of other channels in my neighborhood. I began to suspect that these channels may be overlooked or at least given last choice because they were not in the Supported Channels list for TW.
The behavior of protocol 802.11d is to scan for a country code from one of the nearby routers. The question is, what is the search order? You would think it would start with your own router, but maybe they were not on the list because the channels I picked are not valid in all areas. Or maybe it just starts on channel 1 and mine came in last at 13.
So I dropped the 2.4 Ghz channel to channel 2. Immediately the connection became 100% reliable. My explanation could be bogus, but it has worked reliably all week, not a single failure, which means about 30 restarts from sleep, plus a lot of manually run on/off sleep/wake cycles. Before this fix, I could knock myself offline with just one on/off cycle.
Unanswered questions: This is a desktop machine, so why is it so worried that I may have moved to another country since the last session an hour ago? Why can't I set the country code manually?
p.s. Just as one last check I just now switched back to channel 13. It took 10 tries to connect. Back to channel 2, connected immediately.
*configuration info
iMac 21.5 inch mid 2011, OS X Lion 10.7.5
WiFi Card Type AirPort Extreme (0x168C, 0x9A),
Firmware Version: Atheros 9380: 4.0.67.5-P2P
Locale: RoW (?? Does this mean "Rest of World"? I think it should be ETSI, European something or other.)
Maybe this will work for somebody out there.
Jim -
Firewire disk automatically ejects after sleep mode
I have Maxtor OneTouch Firewire drive that occassionally will automatically eject after after my system awakes from sleep mode. Usually just need to power down the disk and then power back up for it to reconnect, but sometimes that doesn't even work. I have latest firmware from Maxtor, but that didn't help. This is really starting to annoy me. Any ideas?
No ideas? anyone??
-
IMac 2007 freezes after sleep and then can't find hard drive after reboot.
I'm having a problem where my mid 2007 iMac (2.4 GHz core duo w/ 6 Gb of ram) freezes after sleep. It seems to happen only when an application was open at the time of sleep. The freeze manifests as the cursor turns into the spinning wheel, but the computer can't do anything. Command-option escape doesn't work. Most of the time after I reboot, the iMac can't find the hard drive. If I leave the computer off for 15 minutes then it will reboot ok. Is my hard drive going out or do I have another problem? I'm running Mountain Lion 10.8.5. I've repaired permissions, verified the hard drive and reset the NVram but I still have the problem.
Here is the console right before the time of the crash.
11/10/13 10:02:13.069 AM SyncServer[18050]: [0x7fe02140bde0] |DataManager|Warning| Client com.apple.Mail sync alert tool path /System/Library/Frameworks/Message.framework/Resources/MailSync does not exist.
11/10/13 10:02:13.912 AM com.apple.time[177]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
11/10/13 10:02:16.947 AM iCalExternalSync[18051]: [ICalExternalSync ]Encountered exception: *** -[__NSArrayM objectAtIndex:]: index 207 beyond bounds [0 .. 205] withStack: (
0 iCalExternalSync 0x000000010186ca60 iCalExternalSync + 125536
1 iCalExternalSync 0x000000010185bac9 iCalExternalSync + 56009
2 iCalExternalSync 0x000000010186b694 iCalExternalSync + 120468
3 libdyld.dylib 0x00007fff8abf17e1 start + 0
4 ??? 0x0000000000000005 0x0 + 5
11/10/13 10:02:16.948 AM iCalExternalSync[18051]: [ICalExternalSync ]NSException name:NSRangeException reason:*** -[__NSArrayM objectAtIndex:]: index 207 beyond bounds [0 .. 205]
11/10/13 10:02:16.959 AM SyncServer[18050]: [0x7fe02140bde0] |Server|Warning| lost connection 0x7fe021496b30 to com.apple.iCal
11/10/13 10:02:31.511 AM com.apple.time[177]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
11/10/13 10:02:32.786 AM iCalExternalSync[18053]: [ICalExternalSync ]Encountered exception: *** -[__NSArrayM objectAtIndex:]: index 207 beyond bounds [0 .. 205] withStack: (
0 iCalExternalSync 0x000000010618ba60 iCalExternalSync + 125536
1 iCalExternalSync 0x000000010617aac9 iCalExternalSync + 56009
2 iCalExternalSync 0x000000010618a694 iCalExternalSync + 120468
3 libdyld.dylib 0x00007fff8abf17e1 start + 0
4 ??? 0x0000000000000007 0x0 + 7
11/10/13 10:02:32.787 AM iCalExternalSync[18053]: [ICalExternalSync ]NSException name:NSRangeException reason:*** -[__NSArrayM objectAtIndex:]: index 207 beyond bounds [0 .. 205]
11/10/13 10:02:32.797 AM SyncServer[18050]: [0x7fe02140bde0] |Server|Warning| lost connection 0x7fe021434b60 to com.apple.iCal
11/10/13 10:04:21.138 AM com.apple.usbmuxd[29]: _SendAttachNotification Device f0:d1:a9:1b:e1:0b@fe80::f2d1:a9ff:fe1b:e10b._apple-mobdev2._tcp.local. has already appeared on interface 5. Suppressing duplicate attach notification.
11/10/13 10:04:46.805 AM iTunes[15640]: Entered:_AMMuxedDeviceDisconnected, mux-device:48
11/10/13 10:04:46.805 AM iTunes[15640]: Entered:__thr_AMMuxedDeviceDisconnected, mux-device:48
11/10/13 10:04:46.806 AM iTunes[15640]: tid:16dcb - Mux ID not found in mapping dictionary
11/10/13 10:04:46.806 AM iTunes[15640]: tid:16dcb - Can't handle disconnect with invalid ecid
11/10/13 10:11:17.664 AM com.apple.time[11]: Next maintenance wake [Backup Interval]: <date: 0x7f8ac9627660> Sun Nov 10 10:47:04 2013 PST (approx)
11/10/13 10:11:17.664 AM com.apple.time[11]: Requesting maintenance wake [Backup Interval]: <date: 0x7f8ac9627660> Sun Nov 10 10:47:04 2013 PST (approx)
Maybe you are looking for
-
Is there a way to do a 'Lite' save for Flash CC so it doesn't take so long to save?
Bonjour mes amis Scenario: I'm doing a hand-drawn (Wacom), black and white, traditional style animation. Nothing fancy at all is being used. No symbols. No tweening. Just black brush strokes on a plain white stage. Lots of keyframes (500+ drawings),
-
CS4 InDesign (and Illustrator) not printing in Lion OS environment
I have had no trouble installing CS4 in a Lion environment on my Mac. However, while I can open and edit files, I cannot print anything. Nor can I edit or change the print presents or anything at all related to printing. InDesign (and Illustrator)
-
Solution to setRollOverIcon (for JButton) problem
Hi all, I've seen a lot of posts asking why setRolloverIcon() didn't work. I had the same problem, and after looking throught the SwingSet example, I found the solution. So far, the only way that I've been able to get the rollover icon to work is thr
-
Cannot turn I msg on...continue to get message check network connection. Network intact.
-
iphone5 went in recovery mode after replacing power button, everything went well in the repair ,I try to restore but it quits in the middle of the process and go back to i tunes logo please help I been without my phone for a week.