System Freezes when trying to copy GL Budget Scenerio

All-
I have a Business One 2007 PL 4 customer that is trying to copy a budget scenerio. After hitting 'execute', no message is displayed, but the user gets stuck showingthe same GL account number on the bottom left of the screen. (where the error line would normally appear).  The only way out is to End Task on the process. They have copied budgets before without a problem.  Is there anything about an existing account that might cause the copy to fail?  Any feedback would be greatly appreciated.  Thanks in advance.
Pat

hi
the problemmay be like the number of accounts assignedunder budgets could be lot many this would take time togive u the result the second reason could be because of RAM in your computer
Regards,
Manish

Similar Messages

  • Any ideas why InCopy would freeze when trying to copy content?

    Any ideas why InCopy would freeze when trying to copy content? This is occurring on a corporate computer running Windows. We've uninstalled and reinstalled InCopy and are still runnng into the same problem.
    Any ideas would be appreciated. Thanks!

    I am also having the same issue when Syncing my 5th gen Nano. I can sync my iPhone, iPad and my sons iPod Touch but not my Nano. When I click to sync I just get the rainbow wheel.

  • [SOLVED]System freezes when trying to suspend

    Hi everyone,
    I have a hard time to make suspend-to-ram working. Under Debian a
    echo mem > /sys/power/state
    would put my computer to sleep without any problems. On Arch the same command freezes the system. Both screens stay on and show exactly the same picture as before entering the command, but the system is completely unresponsive and the only way to use it again is to turn off the power and reboot.
    I then tried to suspend using uswsusp (s2ram), after installing it as described in the wiki. This yields exactly the same results. I have also tried all of the options for s2ram (-f -p -s etc.) listed here.
    My system is as follows:
    Arch x86_64
    Mainboard: EP43-S3L (Note: the options listed here don't work either)
    Graphics card: ATI RADEON HD 5800 (using the catalyst driver)
    I suspect that I have overlooked something and that it isn't really a problem with my hardware, as (like I said) suspend worked flawlessly under Debian.
    Thank you very much for your help!
    Last edited by bugfix (2012-07-19 08:36:44)

    Problem solved. Turns out, there was nothing wrong with the suspend process itself, rather it was the catalyst driver causing the trouble.
    I fixed this by adding nomodeset and vga=0 to my start-up options in GRUB's menu.lst.
    kernel /vmlinuz-linux root=/dev/sda6 ro nomodeset vga=0
    nomodeset disables KMS which was responsible for freezing my system when trying to suspend. As I found out, it also froze when trying to shutdown or to switch from X to a Terminal.
    vga=0 disables the framebuffer. When the framebuffer is activated with catalyst, the system will suspend properly but show a black screen on resume.

  • System freeze when trying to connect to wireless PEAP network

    This is reproducible everytime. May I know which logs I may find to debug this, and also any possible solutions?
    Thanks!

    Solution - don't know
    Logs: in /var/logs
    kernel.log, dmesg.log, messages.log, everything.log, possibly daemon.log (contents may overlap between these)
    If problem is with X: Xorg.0.log.old
    If you use wicd: /var/logs/wicd/wicd.log
    There has been a fairly widespread problem the past 2-3 months with untraceable system freezes (screen goes black, keyboard & mouse freeze, requires hard reset) that probably involve a kernel panic (flashing CAPS & Scroll Lock LED's) but nothing is found in the logs.  Search this forum, e.g. for "freeze".  Example of one thread: http://bbs.archlinux.org/viewtopic.php?id=88594
    I've been experiencing this for >2 months, and sometimes suspect that in my case it comes from wlan (using WPA/PSK) which frequently disassociates and then reassociates but I find nothing in the logs.  Maddening!

  • System freeze when trying to install 10.2 (Jaguar) on a biege G3

    I'm trying to install 10.2 on a partition on my G3 hard drive. The machine specs are:
    400Mhz G3
    384 Meg RAM
    OS9.2.2
    ROM Id $77D.45F2
    When I try to restart with the install CD, the machine freezes completely. The only way I've been able to recover is by removing the backup battery for about 45 minutes. Then the machine will restart in 9.2.
    What am I missing? I'm following the 'read me' directions and the on-screen prompts.
    Thanks
    G3   Mac OS 9.2.x   Desktops and powerbooks

    Andrew -
    Guess I wasn't too clear as to what is happening.
    But first, yes I am using a perfectly legal (purchased) copy of Jaguar. And I checked the update criteria - since I don't have an Apple SCSI card, there are no updates for a G3.
    Now, as to what happens. When I insert disk 1 and click "install" I get a message that the computer will be restarted and the installation will begin. The screen goes blank. And nothing happens! No restart, no CD activity - nothing. And I can't restart into OS9!
    The machine is dead until I remove the backup battery for a while. Then I can restart in OS9, and everything works.
    Hope this clears up what my problem is.
    Ken

  • I get the pinwheel and the program freezes when trying to copy and paste in Word.  Does anyone know how to fix this?

    In Word I get the spinning pinwheel when I try to copy and paste.  I can switch to other programs just fine but I can't perform the copy and paste and I need to perform a hard reboot to close Word.  Does anyone know how to fix this?

    Hi Ibo,
    This is what just worked for me:
    In Finder, I've dragged all Pages files from the iCloud Drive to the Documents folder on my iMac. (Finder asks your confirmation to remove the files from iCloud; confirm that)
    Once they were on my local hard drive, the files could be opened again.
    It looks to me as if something has changed in iCloud quite recently, leading to this mess. Not the first time, I've had this before. Now it's back. Sigh. And, as you wrote, it renders iCloud fairly useless. Back to Dropbox I suppose.

  • K7N2 Delta2 Platinium - System freezes when copying or writing to HDD

    I am experiencing a strange problem. I don't know what I have changet to my system but since 3 days ago I am geting this system lock up when I move or copy files from one HDD to another. Windows doesn't show any error message. When copying files, either in the midle of the proces or at the end the system LOCKS UP  and there is nothing i can do except a hot restart. I never had this problems and it was months that my computer was very stable. I have no ide how to test to get some info about this issue. Any opinions ?
    Thanx

    The tems are cool. CPU varies from 44°(idle) to 58° celcius (full load). Motherboard also 35° celcius. Now i dont know whats the start but let me tell the whole story. First of all i have this system since long time ago. Normally i install the computer once, than I optimize the system as i want it to be and than i back it up. Now Since i have all my programs installed in the way i want i dont like to reinstall the computer often, because it will take me two week to complete all the tweaks and changes that i do normally. So this system that is now runing has passed to three different motherboards (computer changes). Maybe the process of installing and reinstalling drivers in the system has degraded it. I am very carefull to clean drivers, registry and all. Although the system shows now errors, about 7 months ago i used to suffer system freezes when burning DVD. I couldn't resolve the issue since the problem was Nero being victim of SERVICE PACK 2. Anyway i have read that Windows XP SP has some Buffer and Cache problems and it makes conection with the burning problems. Since then i don't know how, after some times the burning problem disappeared ... i could burn DVD with the same version of NERO and everything was fine untill 3 days ago  . So i got the new NERO 7 with its new EXTRA BUFFER feature whitch works fine. Soon after installing NERO 7 one of my HDD crashed (i dont thing it has any conection with nero), it lost the partition table and it was recognised as UNALLOCATED. I recovered all the datas using a software calle R-Studio (very good by the way it can recover FDISK, Format, Delete, everything). After i had reformated the drive that crashed, I copyed back all the rescued files. Its there that the Copy Hang Ups started. WINDOWS doesn't show any ERROR at all, that means that there is no controller or HDD problem. I checked the drive and its fine. What reasured me that the drive was not the cause, was that even when i started copying between the other drives of my system i got the same problem.  So maybe my system is in a very very bad shape, or i dont have a clue of this thing        What is strange its that WINDOWS DOESN'T SHOW ANY ERROR MESSAGE, and PRIME STRESS TEST GOES ON FOR HOURS WITHOUT THE SMALLEST PROBLEM.
    Thanx Dr. Stu I also tried copying at stock speed and i got the same problem.

  • IPhoto freezing when trying to import photos from iPhone

    iPhoto has started freezing when trying to import photos from an iPhone. The device is recognised but just get "loading . . . " message with no photos appearing. Has anyone else seen this?

    There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

  • My mac freezing when trying to connect to a web site

    My Mac freezes when trying to connect to a website

    What browser are you using? Try using another one to see if it is an application problem or a system wide problem.
    Firefox

  • Lightroom 2.6 freezes when trying to export images

    I have been using LR successfully on a Windows XP machine for several years and using version 2.6 for the past several weeks . As of a few days ago, LR would freeze when trying to export images. The export functions of 'Export with Previous' and 'Export with Preset' seem to work without crashing LR but most of my exporting needs me the ability to adjust the export settings. Any advise?

    I would guess LR only goes by drive-letter so if you've kept that the same it should be ok.  Look for something else.
    I would look in your Lightroom Preferences files to see if there is any drive letter that no longer exists.
    On Vista/Win7 my LR prefs file is in:
    C:\Users\[user name]\AppData\Roaming\Adobe\Lightroom\Preferences
    XP has something similar under C:\Documents and Settings\Local Settings (or Application Data)
    If you open that file in a simple text-editor like NotePad then about halfway down (at least in mine) there are some export-related things that include the drive-letter and path on your hard-drive to various folders.  You can find it by searching for:
    AgMRUPopupList_AgExport_destinationFolderPathPrefix
    Look through those and see if any of the drive-letters or paths are wrong and look around for other paths.  The paths will contain
    or
    instead of \ because the low-level language routines LR is written with need it that way so if you change anything, keep the number of slashes consistent.
    It could very well be that there is nothing wrong with any of the paths, so another approach would be to rename or move your preferences file to see if LR will recreate it with defaults for everything, and see if that clears up the lockups. 
    Whether you decided to edit or rename your preferences file, please make a backup copy so you can put it back in case something even worse happens and you need it back.

  • ITunes freezes when trying to access "burning" tab in advanced preferences

    iTunes freezes when trying to access "burning" tab in advanced preferences and also when attempting to hit burn cd button in lower left corner.

    Thank you SO much!!! This is Exactly the problem I was having. I have spent untold hours in the last couple of days trying to resolve not only iTunes freezing up, but my network connectivity went bust as well. I like Blink so I'm undecided about whether to uninstall it yet, so I just disabled all of its firewall settings, and presto!... I can not only get my CD/DVD player to read and burn CD's, but iTunes and my computer remain functional. I got my computer to reconnect to the internet by doing a System Restore at a point prior to my trying to burn a CD. Thanks again so much. You saved my entire week!

  • Need advise, I have purchased compressor 4.1 to compress my movie file, particularly MKV files. Problem is, that the software freezes when trying to import the 10GB MKV. Any one that can help?

    Need advise, I have purchased compressor 4.1 to compress my movie file, particularly MKV files. Problem is, that the software freezes when trying to import the 10GB MKV. Any one that can help?

    Afraid Compressor won't work with MKV. If you have access to a system running an earlier version than Mavericks, and with Perian installed you can use MPEG Streamclip or Quick Time Pro to convert to a mov.
    Russ

  • Preview freezes when trying to open images - other programs have no trouble

    Preview freezes when trying to open images - other programs have no trouble with the same file. This problem is somewhat intermittent.
    I have replaced the Preview application by moving a copy from another equivalent machine - no luck.
    Did not find any preferences file trash, though I looked.
    Is there one?
    Any suggestions?
    Thanks.

    Edwin,
    The .plist for Preview should be located @ ~/Library/Preferences/com.apple.Preview.plist (where "~" is your Home folder).
    Trash the file, logout/login or reboot your computer and try opening the app and opening the offending file again.
    Let us know if any luck with finding the .plist there and opening your file?
    littleshoulders [:-)

  • Apple Mail 10.5.2 freezes when trying to IMAP sync Apple To Do Items folder

    Hi - my Apple Mail freezes when trying to IMAP sync Apple To Do Items folder. This only started after Leopard 10.5.2.
    A copy of my console log is shown below. Looks like there is some calendar with a nil UID -- and the program has a bug that it can't handle this.
    Does anyone now how I get rid a nil UID (either an empty folder or an item with a null UID) to workaround this bug?
    2/20/08 8:45:19 AM Feb 20 Mail[9754] * -[CalCalendarStore calendarWithUID:]: UID is nil during invocation of -[ToDoReconciler requestReconciliation:]
    Stack Trace: (
    2498794059,
    2525638907,
    2498793515,
    2498793578,
    6043006,
    9130735,
    9129278,
    9129058,
    8690574,
    8687453,
    8665789,
    8664608,
    2498816893,
    2498815336,
    9279289,
    9278235,
    2418472365,
    2418471252,
    2513136725,
    2513136402
    ))

    It looks as if you've the problem discussed in this -> https://discussions.apple.com/thread/4766577?tstart=0 (and other) threads.
    Basically the soldering on your GPU is defective and the GPU probably needs to be reballed: if you take it to Apple they will just want to replace the logic board. If you're still under AppleCare, or if they will replace it gratis, that may fix your problem temporarily. A reball may also be temporary, but it's less expensive and there are repair centers that offer up to a one-year warranty: much better than Apple's 90-day warranty.
    Have a look at the thread above: no need to read it all - just give it a glance and leave a message there if you wish.
    Good luck,
    Clinton
    MacBook Pro (15” Late 2011), OS X 10.??, 16GB Crucial RAM, 960GB M500 Crucial SSD, 27” Apple Thunderbolt Display

  • System freezes when link to Google Hangouts

    Hello, 
    Can anyone help with an answer why my System freezes when I try to link to Google Hangouts
    I am using a Samsung Notebook N150 , windows 7 starter , service pack 1 .
    I have tried a system restore but get a "shadow error " , have also tried in Safe mode
    I am not sure how to post the event viewer here ?
    Thank you  

    Hi，
    For event log, you can upload it to a public folder like OneDrive, then paste the download link here for further analyzing.
    When does this issue happen? I mean something you have changed might causes this issue, or this plug-in doesn't work since you installed to Windows 7 Starter. Hangouts doesn't support certain mics and webcams.
    Since this plug-in is related with audio\video, I suggest you update the drivers for your audio\video device.
    Some thirty audio\video packages can also cause a crash.
    Try to uninstall and reinstall the plug-in.
    For Product Google Hangouts, It's better to contact this support, they're more familiar with this product
    https://support.google.com/hangouts/?hl=en#
    NOTE
    This response contains a reference to a third party World Wide Web site. Microsoft is providing this information
    as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites.
    Yolanda Zhu
    TechNet Community Support

Maybe you are looking for