System.getProperty(String key) - where I can find all available keys ?

Subject, and concrete I want to give phone info (name, id, vendor). Thanks!

have you search on nokia forums and in this forum(use top right field to search)?
i'm sure that it has been ever asked and answered...

Similar Messages

Seach table like tmsbuffer where I can find all date of transaction order

Hi I seach table where I can find all transaction order 'TRKORR' with all system 'SYSNAM' like this table and all date of creation of the order.
The problem is I should use RFC connection for that and search this in table E070 and I don't want use RFC
Is a table exsite with this? (date of creation of transaction by system)

you will have to write code to check individually in all systems for creation date in those systems.
transports generally get created in only 1 system the development system and are then imported into other systems.
so you can track by looking at E070Create in Dev and later, you can look for import date / time for other systems in E070 etc
Good luck.
Regards,
Siddhesh

Need table name where i can find all infopackages and what are data targets

Hi Guys,
Could you tell me the table name in SAP BW, where i can find what are the data targets in Info Package.
I need to do this job for 200 infopackages.
Thanks in advance.

Hi
I had similiar problem.
Look at RSLDPSEl-selupdic.
THX
Adam

Is there a place where I can find all the field values for RH_STRUC_GET

Hello Gurus,
I there a place or maybe some documentation that will explain or give the different values for the FM RH_STRUC_GET fields ?
Thank you,
JZ

Hi Jorge
In this link you have an example .
RH_STRUC_GET Performance
Now when I needed that for crm I used to a class
'CL_CRM_PPM_UM_TOOLKIT.
In sdn you can find examples about used the FM or class

System.getProperty(String key) keys.

HI All
Anyone can tell me, what key I must use for getting devise IMEI on Nokia 7610 or any other Nokia, I have tried evry combinations on my phone, like "com.nokia.mid.imei", "com.nokia.phone.imei" etc..
Please help me
Thank you.
P.S.
If there are any other ways to know about my question please write me.

have you search on nokia forums and in this forum(use top right field to search)?
i'm sure that it has been ever asked and answered...

Where we can find the detail infomation about the Value String of automatic

Where we can find the detail infomation about the Value String of automatic?
such as WE06,WE01 and so on.

Hai,
           Value string keys are for SAP internal usage. It is just a pointer to the transaction event key which is necessary for automatic account determination.
           Movement types are linked to transaction keys via valuation string in OMWN T-code.
           The R/3 System automatically determines the value string assigned to a specific transaction. It depends partly on entered parameters manually and partly on parameters derived internally by the system. The value string contains all posting transactions that are possible for a certain transaction. The program decides which of these posting transactions lead to G/L account postings in individual cases. You cannot define this in Customizing.
Value string WE01, for the goods receipt for a purchase order into stock, contains transactions BSX and WRX.
WE01: BSX, WRX, PRD, KDM, EIN, EKG, BSV, FRL, FRN, BSX, UMB.
WA14: BSX ,PRD, BSX, UMB
WA01: BSX, GBB, PRD, BSX, UMB
Value string RE05 contains transactions BSX and UMB.
In the standard system, value string WE01 is assigned to goods receipts (and also cancellations and return deliveries) for Standard and Subcontracting purchase order items without account assignment concerning valuated material into stock. In the case of (valuated) goods receipts for purchase order items not subject to account assignment,
post the items to a stock account using the transaction key BSX and make an offsetting entry to a GR/IR clearing account. A price difference posting (transaction key PRD) is only used if the valuated material is subject to standard price control and if the order price (or invoice price) is different from the standard price. Transaction key KDM is required in Inventory Management for purchase orders in foreign currencies because of differences in exchange rates between goods receipts and invoice receipts, unless the material can not be debited or credited because it is subject to standard price control.
The transaction keys EIN and EKG (and possibly FRE see account determination for delivery costs) are only used in company codes where purchase account management is active (as required in France and Belgium for example).
The transaction keys BSV, FRL, and FRN are only used for the Subcontracting item category.
Value string WA14 is defined for deliveries without charge (movement type 511).
The following scenarios are possible:
Delivery without charge for material subject to moving average price control → No accounting document
Delivery without charge for material subject to standard price control (and if the posting date is in the previous period standard price in the posting period = standard price in the current period) → Inventory posting (receipt at standard price) and offsetting entry to price differences account
Delivery without charge for material subject to standard price control, with posting date in the previous period and the standard price in the posting period is different to the standard price in the current period → Inventory posting (receipt at standard price) and offsetting entry to price differences account (posting in the previous period) → Stock correction posting and Revenue/expense from revaluation (posting in the current period)
In the standard system, value string WA01 is assigned to goods issues and other goods receipts. The R/3 System uses an additional influencing factor, account grouping, to differentiate further between the various movements during account determination.
Hope it will be Helpful 4 u.
Reward Point if Useful.

Can anyone tell me where I can find a beginners guide to the filing system?

Can anyone tell me where I can find a beginners guide to the filing system on the Macbook Air iOS 10.9.4?

So, does this mean you have given up and decided to return to the MS Windows (PC) embrace?
The link that dominic23 provided has parts 1, 2, and 3 — did you review all of these? What remaining question(s) do you have about the Apple file system?
Videos that you may find on the Apple site are not updated regularly, and steps/techniques shown in them may be outdated, or not work as shown on the current operating system release.
Did you look into the Apple Retail Store One to One learning assistance?
Did you consider either of the following books as a learning aide?
Switching to the Mac: The Missing Manual, Mavericks Edition
OS X Mavericks: The Missing Manual

Where I can find and use "Java Desktop System Management Tools "

With Solaris 10, you not only get the Java Desktop System desktop environment, but also the Java Desktop System Management Tools and a selection of free and trial Development Tools, which are available for download only.
I found only an information about JDS release 2
but today it's release 3 already and it's said it already integrated in JDS
and above sentence it state that it already come with solaris 10?
where i can find that , where i can use it
http://docs.sun.com/app/docs/doc/817-7575/6mmsrpduj?a=view
this page said how to install but ...where I can find CD/
regards please help

Good question. It appears to have been installed with Solaris 11/06, as I have all of the packages listed here:
http://docs.sun.com/app/docs/doc/817-7575/6mmsrpdus?a=view
However, it does not appear in the Java Web Console. I tried adding it using the wcadmin command, but haven't managed to get it to run as per the docs. The documentation assumes that it is already installed and visible in the Java Web Console...
According to this documentation:
http://docs.sun.com/app/docs/doc/817-1985/6mhm8o5l6?a=view#gdjpi
An application for the Java Web Console should have a WEB-INF directory and an app.xml file. The apoc packages come with neither, so something is missing.

Where i can find the deleted transport request in SAP development system?

where i can find the deleted transport request in SAP development system?

Hi,
When you delete the transport request from SE10 , you can not find the request entry from E070 and E071.
and only local change request are possible to delete from SE10 /SE09
if you are try to delete the change request with target system then it's gives you the error that request cannot be deleted because it contains locked objects.
It's not possible to find out the deleted request from SE10.
regards,
kaushal

Where I can find documentation platforms (operating systems) CERTIFICATES for earlier versions of ASE (15.5, 15.0, 12.5, etc)?

Hi....
Where I can find documentation platforms (operating systems) certificates for earlier versions of ASE versions of ASE (15.5, 15.0, 12.5, etc)?

The detailed certification information that used to be available on the Sybase web site is not currently externally accessible since SAP decommissioned the site - all that is currently available is the basic information in the SAP Product Availability Matrix (PAM) and the base release information available in the ASE documentation.
ASE support is looking into ways of restoring external access to the certification reports, possibly here as SCN documents or on the SCN wiki. I don't have any estimate for when this will be available, though.
If you have a support contract, you can open an incident to ask about specific versions/platforms; we still have internal access to the reports. If the support engineer doesn't know how to access the reports, ask them to get in touch with me.
-bret

Where we can find General Modifier Keys

Hi,
where we can find General Modifier Keys.and where we control the field status of movement types.
Thanks,
Samsunder

Hello,
Modifiers you can find in acccount assignment category . E.g. For account assignment category K we have modifier assigned as VKA.
You can also create your own modifier and assigned to account assignment category and also on OBYC >> GBB
You can also create and assign to moevement type also.
Regards,
Shailesh

Where I can find an example for an ADF application

where I can find an example for an ADF application where the view layer is JSF and the Business service layer is JAVA with JSF controller as controller layer
Edited by: belal on Jun 18, 2011 11:59 PM

I created new Fusion web application so I have now to parts in the application navigator (model, viewcontroller)
I want to write java class in the Model part as following:
package persistence;
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.PreparedStatement;
import java.sql.ResultSet;
import java.sql.SQLException;
import java.sql.Statement;
public class DBManager {
Connection connection = null;
public DBManager() {
super();
public void init() {
try {
// Load the JDBC driver
String driverName = "oracle.jdbc.driver.OracleDriver";
Class.forName(driverName);
// Create a connection to the database
String serverName = Constant.DB_SERVER_NAME;
String portNumber = Constant.DB_PORT_NUMBER;
String sid = Constant.DB_SID;
String url =
"jdbc:oracle:thin:@" + serverName + ":" + portNumber + ":" +
sid;
String username = Constant.DB_USER_NAME;
String password = Constant.DB_PASSWORD;
connection = DriverManager.getConnection(url, username, password);
System.out.println("*");
System.out.println(connection.getCatalog());
} catch (ClassNotFoundException e) {
System.out.println("Could not find the database driver");
} catch (SQLException e) {
System.out.println("Could not connect to the database");
e.printStackTrace();
and wrote JSP page in the view controller part as following :
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<%@page import="persistance.*"%>
<% persistance.DBManager manager = new DBManager(); %>
<%@ page contentType="text/html;charset=windows-1252"%>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=windows-1252"/>
<title>Browse</title>
</head>
<body>
<table>
</table>
</body>
</html>
but this I have the following error in the jsp page :*type persistance.DBManager not found*
my job is to build simple ADF application using JSF and java without any ADF faces or JPA or any another technology
thanks
Edited by: belal on Jun 19, 2011 12:51 AM

XP Drivers to Satelite A200-13o - where I can find?

Hej!
I looking/waiting for a drivers to OS: Windows XP to Toshiba Satelite A200-13o. Unfortunatly I buy notebook with Vista.
On support site are drivers only to Vista. Could You tell me where I can find a drivers to XP, or when will be update on download site?
Regards. Pawel.

Hej Pedro!
I get drivers from @k.lebzuch to wifi and bluetooth:
Wifi:
http://downloadcenter.intel.com/filter_results.aspx?strTypes=all&ProductID=2753&OS FullName=Windows*+XP+Professional&lang=eng&strOSs= 44&submit=Go%21
Bluetooth:
http://www.toshiba-tro.de/tools/bluetooth/BT-stack.zip?Submit=Download
So... I allready install this drivers and wifi working perfect... But I still have a problem with a bluetooth. I use FN+F8 & my mobile can't still find a notebook... Meybe I must install Nokia Pc-Suite or different soft to create connection with my mobile... I will check this idea later.
BTW: When I install drivers (from rapid) from my third post in this topic and the last one to wifi and bluetooth - I don't have any errors in "managment devices" (in polish "Menad?er urz?dze?") in system in control panel.
Waiting 4 answers.
Regards. Pawel.

Where I can find Jumper J203

When I try update my operating system from solaris 7 to solaris 8 on my ultrasparc enterprise 2, system tell me need update fireware to support 64 operating system by setting jumper J203 to 2 and 3 pin connected. But I am sorry, I can't found this jumper anywhere in motherboard.
Who can tell me, where I can find the jumper J203?
Thank you!
Cidy

If, in fact it, is an Ultra 2 then you need to move J2003 from 1-2 to 2-3, not J203. See: http://sunsolve.Sun.COM/handbook_pub/Devices/System_Board/SYSBD_Ultra2.html#3132
for the location of J2003, Below FPROM & beside NVRAM. You will hve to remove SBUS cards that may be installed over this Jumper

Where I can find documentations on how to use MyComponse API ?

Where I can find documentation on how to use MyComponse API ?
Any example ?
Thanks

not 100% sure at which point the callout to BEFOREPROCESSCOMPOSE is done, but during the process logs phase, the data in the CVR$ tables is copied into the clg$ tables, and the cvr$ table dml flags cleared
unles the query is very complex/long running why not join the clg$ tables (only have the data that has changed, so smaller than the cvr$ tables, to your base tables for determining if relevant within the MyCompose needCompose method?
an example from one of our MyCompose classes is
public int needCompose(Connection conn, String clientid) throws Throwable{
boolean baseDirty = false;
Statement st = conn.createStatement();
String sql = null;
int rowCount = 0;
int fetchCount = 0;
ResultSet rows;
// log user
// sql = "INSERT INTO qpub_log (TIMESTMP,message) "
// + " values (sysdate, '" + clientid + " assd' )";
// rowCount += st.executeUpdate(sql);
// need to compose if there are any relevant changes to assessment details FOR
// TIR / SOLO assessments
// Inspection history checklists
// PIJ marking sheets
// INSSI
// Risk Assessment)
// also changes to (in case of underlying alterations causing data to be withdrawn)
// STATUS_LOGS
// ROLE_ASSGNTS
if(this.baseTableDirty("CDB_OWNER", "ASSESSMENT_DETAILS")){
return oracle.lite.sync.MyCompose.YES;
if(this.baseTableDirty("CDB_OWNER", "STATUS_LOGS")){
sql = "SELECT count(clg.context_key) "
+ "FROM CDB_OWNER.ROLE_ASSGNTS rola "
+ " ,CDB_OWNER.USER_ACCOUNTS usra "
+ " ,CDB_OWNER.CLG$STATUS_LOGS clg "
+ "WHERE usra.user_name = '" + clientid + "' "
+ "AND rola.rolat_rol_code IN ('INSPECTOR','COVER_INSP','DELEG_INSP') "
+ "AND rola.context_key_by=to_char(usra.par_id) "
+ "AND rola.context_key_for=clg.context_key "
+ "AND clg.staa_seq_no=47 ";
rows = st.executeQuery(sql);
rows.next();
fetchCount = rows.getInt(1);
if (fetchCount != 0) {
sql = "INSERT INTO qpub_log (TIMESTMP,message) "
+ " values (sysdate, '" + clientid + " assd stal" + fetchCount + "' )";
rowCount += st.executeUpdate(sql);
return oracle.lite.sync.MyCompose.YES;
if(this.baseTableDirty("CDB_OWNER", "ROLE_ASSGNTS")){
sql = "SELECT count(clg.id) "
+ "FROM CDB_OWNER.ROLE_ASSGNTS rola "
+ " ,CDB_OWNER.USER_ACCOUNTS usra "
+ " ,CDB_OWNER.CLG$ROLE_ASSGNTS clg "
+ "WHERE usra.user_name = '" + clientid + "' "
+ "AND rola.rolat_rol_code IN ('INSPECTOR','COVER_INSP','DELEG_INSP') "
+ "AND rola.context_key_by=to_char(usra.par_id) "
+ "AND rola.id=clg.id ";
rows = st.executeQuery(sql);
rows.next();
fetchCount = rows.getInt(1);
if (fetchCount != 0) {
sql = "INSERT INTO qpub_log (TIMESTMP,message) "
+ " values (sysdate, '" + clientid + " assd rola" + fetchCount + "' )";
rowCount += st.executeUpdate(sql);
return oracle.lite.sync.MyCompose.YES;
// if no relevant changes do not compose
return oracle.lite.sync.MyCompose.NO;
}

System.getProperty(String key) - where I can find all available keys ?

Similar Messages

Maybe you are looking for