System gets slow

Dear Experts,
Please solve my query,
Today my server is getting slow and I checked my buffer levels and I found that buffer levels are in red color and shows below 75% and after some time it increased automatically up to normal buffer levels
I donu2019t know what happened to my system this is not first time, last 10 days onwards it is like this only
I think we need to increase buffer levels
So please help in this issue how can I increase buffer levels and which parameters can I increase
Regards

hi Srinivas ,
thanks for reply and here i checked in my system
here some times my server buffer levels goes to very low like below
Buffer cache - 84% between 80 :90 % -84 <80 : 90 3: cache hit ratio below thresh
Library cache - 100 % >90 %
Redo Log buffer - 74 > 5000
mostely it shows like below
Buffer cache - 95 % > 90 %
Library cache - 100 % >90 %
Redo Log buffer - 34533 > 5000
please reply what can i do for this
Regards

Similar Messages

System get slow

hello all
can u please tell me why my system get slow.
however, it is working good early days.
since i m installed enterprise edition on my home system,
it is for learning purpose. my system having--
RAM-- 128
O/S --- WINDOS XP.
ORACLE 9 i installed.
if it is due to coockies then tell me how could i remove this?
thanx
with regards
ashish

if it is due to coockies then tell me how could i remove this?
Most likely that's not cookie related.
If your sole purpose is to test Oracle, it will be better to install XE instead of EE on your PC. XE will require few memory than EE. With 128M it's hard to test any advanced feature of EE anyway.

New HD and OS installed, but system gets slower as time goes by

I have just put in a new 250GB HD, a new DVD-R drive, and installed a new OS(10.4.11). When the Powerbook first boots up, it works fine, but as time goes by(just a few minutes even), the system gets bogged down and eventually grinds to a halt. I've been told the HD is "leaking" to a file and the file is getting bigger and bigger to the point that the system can't run. I've watched the HD and I don't see any files getting bigger, but the HD "GB available" gets smaller and smaller(starting at 221GB and going down to below 200GB. Not sure what to do next. Please help.

Use Activity Monitor to see what is hogging your CPU cycles and slowing the machine down. The difference between 200GB available and 221GB available is not causing the slowdown. The process that is consuming enough CPU cycles to write 21GB of data to the hard drive is your problem.

System gets Slow after 10.6.5 update

So, I just updated it using standalone combo installer and straight away notice that to repair the disc permitions now takes 3 mins, before it took only 1min. even if there is nothing to repair. and futher more my whole system gets very slow after a few hours of using safari, skype, vuze, together and wasn't able to shut down just after using safari alone, had to press the power. havent been using anything else for so long so dont know how about it, but it seems to be ok. ah, im using airport to get to the internet if that's important.

See:
Mac Maintenance Quick Assist,
Mac OS X speed FAQ,
Speeding up Macs,
Macintosh OS X Routine Maintenance
Essential Mac Maintenance: Get set up,
Essential Mac Maintenance: Rev up your routines,
Maintaining OS X,
Five Mac maintenance myths, and
Myths of required versus not required maintenance for Mac OS X for information.

OC to 200FSB and system gets slower, huh?

I have a MSI K7N2-L with a TbredB 1800+. It will post at 200x10 (2000MHz) and run but my games and anything related to 3d are actually SLOWER then when it runs at 166x12.5 (2000MHz). And I'm not talking like 5FPS slower I mean like 50-80FPS slower. In 3DMark01SE I get avarage 200fps at 166MHz FSB in test 1, it slows to about 80fps when running at 200MHz FSB. Can anyone explain this?

Quote
Originally posted by symtrax
I have a MSI K7N2-L with a TbredB 1800+. It will post at 200x10 (2000MHz) and run but my games and anything related to 3d are actually SLOWER then when it runs at 166x12.5 (2000MHz). And I\'m not talking like 5FPS slower I mean like 50-80FPS slower. In 3DMark01SE I get avarage 200fps at 166MHz FSB in test 1, it slows to about 80fps when running at 200MHz FSB. Can anyone explain this?
Your ram (that's just a guess - as I'm not as knowledgable as most of the others)? Maybe you'd get the desired result with pc3200.

FCPX and whole system gets slower by the day

I am using FCPX on Mountian Lion on a mid 2010 MacBookPro with full RAM and a boot drive that is more than half empty.
My computer can barely cope anymore with video editing and is generally very laggy even when video is not rendering.
What should I do? Should I get new MBP or iMac?

Is your question about the specs of the raw original media I am editing?
Yes I am using a seperate drive connected by FW800. Projects and events are all on the same drive.
My computer is generally laggy even when not editing or rendering.
When I switch back to FCPX from another program the system just freezes and i get the spinning circle of death for up to thirty seconds.

System getting slow

my system takes too much time to boot up and to open files or folders. I tried to recover the system using recovery file created in my hard disk, but recovery is also not working. Is it possible to recover my notebook into normal form with out changing OS.

Hi:
Test the hard drive and memory from BIOS - do a compete and extensive testing. Wait for everything to finish, keep a note of failure ID if any:
http://support.hp.com/us-en/document/c01443317
If hard drive has failed and recovery partition is not working, you can try using recovery media you must have created age you setup the laptop.
If you've not done so, you've to order Recovery USB from HP directly.
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

NI Session Manager gets slower and slower from call to call!

I have the following problem with NI-Session-Manager:
I use Session Manager a lot on my test systems. Now that I have a test system running that makes many Session Manager Calls I noticed that after a while the system gets slower and slower. I�ve attached a Sequence File, which demonstrates this problem.
This sequence file is based on the LV Session Manager Example, which ships with TestStand.
Instructions: In the UI-Msg Field of the Sequence Editor you will see how long the actual run took to execute. Every run makes 500 calls to Session Manager. You will notice that every run takes a little bit longer than the previous. After 100 runs the difference is significant.
Although my example uses a COM
port to demonstrate the problem this problem is really related to Session Manager because the same happens if I use an IVI-Instrument (i.e. NI-DMM, NI-Switch, �)
Any help appreciated!
Regards
Herbert
Herbert Koltschik
Sagem Communication Austria
[email protected]
Attachments:
sessionmgr_-_slow_down_problem.zip ‏63 KB

Herbert -
Thanks for the feedback. I will look into item (1).
The design of the session manager was to solve the problem of only having to share an instrument within a multithread application. If the session already exists, than you get the same session and thus the same handle, and the instrument is only initialize once and closed after the session no longer exists.
In the case of a C++ based program you would have to add the session as a member variable that has a specific lifetime. When the object is release, so will the session.
In the case of an application like TestStand, you just attach the session to the execution. Once the execution goes away, the session may go away if no other execution is using it.
In the case of L
abVIEW being called from TestStand, you are using VIs as subroutines, so either the application (TestStand) must manage the lifetime of the session, or the VI subroutine must deligate the lifetime control to a "global" VI. The item you attach to the global could be the refnum itself or the SMgr session. One way of doing this would be to create a VI that serves the refnum to you but internally manages the lifetime of the ActiveX references to the Session Manager sessions. This would be a simple vector of names and their sessions. When called the VI would lookup and return a refnum from an existing session or create a new session and return a refnum for it.
Scott Richardson
Scott Richardson
National Instruments

Aperture getting slower and slower

When I first got my Mac, and installed Aperture it was lightening fast. The sliders worked in real time, I never got the spinning wheel, every reason I wanted a Mac in the first place had come true. Fast forward to today - about 6 months into owning the Mac and using Aperture, the software is running slower and slower. Even clicking on an adjustment often takes time for the adjustment to load. Brush HUD's don't show up right away; adjustments don't show in real time - all of this makes tasks with brushes painful if not sometimes impossible. I've read the posts and threads related to slowness - faces is off; I'm not sharing photo's with I-life or I-work; all other apps and software are closed and shut down; my HDD is under 60% utilized; my library resides on my computer. Why is the system getting slower, and what can I do? Obviously, I can add RAM, but my question would be why would it have worked so fast previously and work so slow now with the same RAM? Any suggestions for adjustments, or suggestions. Anybody else experience progressively slower Aperture?

How much RAM do you have?
In any case:
Repair your Library.
Then:
Copy your repaired Aperture Library to an external drive. Rename the version on your system drive. Run Aperture from the external drive and confirm that the copy is whole and working. Delete the re-named version on your system drive. Empty the system trash. Just for giggles, using Disk Utility, repair your system drive. Then copy your Aperture Library back to your system drive.
How does it run?
(This will repair your Library, possibly clean up your disk, and defragment your Aperture Library (many of which contain hundreds of thousands -- even millions -- of files).)
There is one other thing to do -- PRAM flush? -- I'll see it I can turn it up.

Java Thread.. System Clock gets slower..

Hello All!
I have never came accross such problem in my last 4 years of java development but right now its sucking my brain like any thing..
Let me clerify what my application is doing.
A node which is basically thread is executed and as it performs its job it is stopped by breaking the while loop like logic and then a method isRunnable() is called to calculate the time to run the thread again on the basis of pre-defined schedule (e.g. after 1 minute). so what i was doing in this method i was calling wait (sheduledMinutes*60*1000).
There are multiple nodes which can be run in parallel. Problem occured when some nodes started immediately or after a time much shorter than the value defined in wait() method.
So as an alternative way i decided to not rely on wait() and wrote my own implementaion i.e. i call wait(1000) in isRunnable() and the check if the current system time is less then the scheduled time. But it didn't work either.
The problem revealed when i printed the valued of current time taken by the system and the scheduled one. The System clock gives the current time which is less than the actual System time shown on windows clock. I dont know why but it seems like as my threads continue to run the system clock gets slower or something and returns an old time. Hence nodes start immediately.
Any solution to this problem would be highly appreciable.
Regards,

Well yeah u r right. I figured it out that it was just my threads running slowly. But the threads ran immediately there was another reason for that. My threads were waiting for the sheduled minutes to run again. In the mean while if i presed the stop button to stop the thread i was just setting the stop variable value to true. Which was basically the check in the while loop in run method. U can notice the thread still sleeping due to the call to wait method. And then if again mean while i press start button i called System.gc(). and then pass the current thread to new Thread like Threa t = new Thread(node); t.start();
Now u can c another thread has been created but the last one was not collected by the garbage collector as it was still waiting and doing something ofcourse not dead. So now when new thread stops these was a possiblity of last thread ( one in waiting state) to run according to schedule and it make the current thread run immediately.
I hope u can understand how difficult it was for me to figure this thing out :)
But after 3/4 hours hair tearing i got the bug and then when i was stopping a thread i infact broke the waiting loop as well. Now the thread was dead and collected by garbage collector before new thread could start :)
Hhhhhhhhhhhhhh sometimes programmign really sucks.
Have fun. and thanx for ur concern..
Regards

Hello, I have a macbook pro 15 ", it has 4GB of memory, when I try to run a video in full hd hd in the system it gets slow. Is this normal?

Hello, I have a macbook pro 15 ", it has 4GB of memory, when I try to run a videoin full hd hd in the system it gets slow. Is this normal?

Glauco Neves wrote:
Where can I find this new version? Thank you
10.7.4 is the latest update of MacOS X Lion. Run Software Update in System Preferences.
Since you state to run 10.7.2, Software Update will have to use the combo updater to bring it up to 10.7.4. This will entail a large download that will take some time so have patience. I suggest the following steps:
Restart the Mac, press and hold Command-R to start up in Recovery Mode (More info: http://www.apple.com/macosx/recovery/ ).
If needed, select the desired language to move to the next screen (only if it is the first time in Recovery Mode).
Select Disk Utility in the bottom of the list, Continue...
Choose the hard disk drive device on the list ( xxx.xx GB APPLE HDD ...) by clicking on it.
Click on Repair Disk button, wait for it to finish.
Choose the Lion boot volume, Macintosh HD, by clicking on it.
Click the Repair Disk button, wait for it to finish. If any errors are found and the process does not end with a "The volume Macintosh HD appears to be OK." message, click on Repair Disk again.
Click on the Repair Disk Permissions button. This will take awhile to finish.
Quit Disk Utilities, choose Restart from the menu.
Now run Software Update in System Preferences, choose to apply all missing updates. This will take quite awhile, depending on how fast your Internet connection is. The Mac will need to be restarted when the updating is done.
Run Software Update again to have Safari updated to the latest version. This is necessary since Safari 5.1.7 needs OS X 10.7.4 to be running already.

ALSA: snd-via82xx - No sound but system gets very slow

Hello!
I'm using the Onboard sound chip on my Fujitsu-Siemens D1607 mainboard. It' A Sigmatel STAC9758/59 Chip and runs with snd_via82xx module (worked with SuSE 9.1 so far, at least stereo-out but no LineIn). Now when i load the module as discribed in the ALSA howto an unmute Master and PCM i still get no sound, but my system gets very slow (applications start ten times slower, loading websites also takes much more time). But snd_via82xx seems to load without errors.
ArchLinux is uptodate and i'm using a custom Kernel 2.6.7 because i need some special settings for my AVM Fritz!Card DSL.
Does anybody have any hint?
CU ActionNews

Hmm ... is tried it at root only . Strange is that even CD doesn't work. No sound. Unfortunally this config works perfectly under WindowsXP so speakers should work so far. Realy strange .... this is was amixer says:
amixer
Simple mixer control 'Master',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 31 [100%] [on]
Front Right: Playback 31 [100%] [on]
Simple mixer control 'Master Mono',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 31
Mono: Playback 31 [100%] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 0 [0%] [off]
Front Right: Playback 0 [0%] [off]
Simple mixer control 'Headphone +3dB Boost',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Headphone Amp',0
Capabilities:
Mono:
Simple mixer control '3D Control - Switch',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control '3D Control Sigmatel - Depth',0
Capabilities: volume volume-joined
Playback channels: Mono
Limits: 0 - 3
Mono: 0 [0%]
Simple mixer control 'PCM',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 31 [100%] [on]
Front Right: Playback 31 [100%] [on]
Simple mixer control 'PCM Out Path & Mute',0
Capabilities:
Mono:
Simple mixer control 'Surround',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 0 [0%] [off]
Front Right: Playback 0 [0%] [off]
Simple mixer control 'Center',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 31
Mono: Playback 31 [100%] [off]
Simple mixer control 'Center/LFE Jack',0
Capabilities:
Mono:
Simple mixer control 'LFE',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 31
Mono: Playback 0 [0%] [off]
Simple mixer control 'Line',0
Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 31 [100%] [on] Capture [on]
Front Right: Playback 31 [100%] [on] Capture [on]
Simple mixer control 'Line Input Source',0
Capabilities:
Mono:
Simple mixer control 'LineIn Jack',0
Capabilities:
Mono:
Simple mixer control 'CD',0
Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 31 [100%] [on] Capture [off]
Front Right: Playback 31 [100%] [on] Capture [off]
Simple mixer control 'Mic',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Playback channels: Mono
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono: Playback 0 [0%] [off]
Front Left: Capture [off]
Front Right: Capture [off]
Simple mixer control 'Mic Boost (+20dB)',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Mic Input Source',0
Capabilities:
Mono:
Simple mixer control 'Mic Select',0
Capabilities:
Mono:
Simple mixer control 'Mic1 Jack',0
Capabilities:
Mono:
Simple mixer control 'Video',0
Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 0 [0%] [off] Capture [off]
Front Right: Playback 0 [0%] [off] Capture [off]
Simple mixer control 'Phone',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Playback channels: Mono
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono: Playback 0 [0%] [off]
Front Left: Capture [off]
Front Right: Capture [off]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'IEC958 Output',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'IEC958 Playback AC97-SPSA',0
Capabilities: volume volume-joined
Playback channels: Mono
Limits: 0 - 3
Mono: 3 [100%]
Simple mixer control 'PC Speaker',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 15
Mono: Playback 0 [0%] [off]
Simple mixer control 'Aux',0
Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 0 [0%] [off] Capture [off]
Front Right: Playback 0 [0%] [off] Capture [off]
Simple mixer control 'Mono Output Select',0
Capabilities:
Mono:
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 15
Front Left: Capture 15 [100%] [on]
Front Right: Capture 15 [100%] [on]
Simple mixer control 'Mix',0
Capabilities: cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Capture channels: Front Left - Front Right
Front Left: Capture [off]
Front Right: Capture [off]
Simple mixer control 'Mix Mono',0
Capabilities: cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Capture channels: Front Left - Front Right
Front Left: Capture [off]
Front Right: Capture [off]
Simple mixer control 'Exchange Center/LFE',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'External Amplifier',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Front Jack',0
Capabilities:
Mono:
Simple mixer control 'Input Source Select',0
Capabilities:
Mono:
Simple mixer control 'Input Source Select',1
Capabilities:
Mono:
Simple mixer control 'Rear Jack',0
Capabilities:
Mono:
Simple mixer control 'Sigmatel 4-Speaker Stereo',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Sigmatel Surround Phase Inversion Playback ',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'VIA DXS',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 30 [97%]
Front Right: Playback 30 [97%]
Simple mixer control 'VIA DXS',1
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 31 [100%]
Front Right: Playback 31 [100%]
Simple mixer control 'VIA DXS',2
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 31 [100%]
Front Right: Playback 31 [100%]
Simple mixer control 'VIA DXS',3
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 31 [100%]
Front Right: Playback 31 [100%]
Should be ok, but perhaps you guys find something wrong.
in dmesg and /var/log/messages i do not find anything uncommon. Most of the messages are status messages from pppd .
CU ActionNews

My 24" IMac is slow and getting slower and over heats

24" IMac 2.8Ghz, 4G of Ram 320G Intel HD O/S Mavericks 10.9.5
Computer is slow and getting slower.
Seems to overheat and freeze when processing video
Sepearte issue blue tooth not working Computer says now hardware

EtreCheck version: 1.9.15 (52)
Report generated 7 October 2014 3:14:24 pm AEDT
Hardware Information: ?
iMac Intel Core 2 Duo (aluminum enclosure) (Early 2008)
iMac - model: iMac8,1
1 2.8 GHz Intel Core 2 Duo CPU: 2 cores
4 GB RAM
Video Information: ?
ATI Radeon HD 2600 Pro - VRAM: 256 MB
iMac 1920 x 1200
System Software: ?
OS X 10.9.5 (13F34) - Uptime: 0 days 1:3:9
Disk Information: ?
WDC WD3200AAJS-40VWA1 disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 319.21 GB (179.11 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information: ?
Apple, Inc. Keyboard Hub
Mitsumi Electric Apple Optical USB Mouse
Apple, Inc Apple Keyboard
Apple Inc. Built-in iSight
Apple Computer, Inc. IR Receiver
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[not loaded] com.elgato.driver.DontMatchAfaTech (1.1) Support
[not loaded] com.elgato.driver.DontMatchCinergy450 (1.1) Support
[not loaded] com.elgato.driver.DontMatchCinergyXS (1.1) Support
[not loaded] com.elgato.driver.DontMatchEmpia (1.1) Support
[not loaded] com.elgato.driver.DontMatchVoyager (1.1) Support
[not loaded] com.microsoft.driver.MicrosoftMouse (7.0.0) Support
[not loaded] com.microsoft.driver.MicrosoftMouseBluetooth (7.0.0) Support
[not loaded] com.microsoft.driver.MicrosoftMouseUSB (7.0.0) Support
[not loaded] com.wdc.driver.1394HP (1.0.9) Support
[not loaded] com.wdc.driver.USBHP (1.0.11) Support
Startup Items: ?
EyeConnect: Path: /Library/StartupItems/EyeConnect
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[running] com.wdc.SmartwareDriveService.plist Support
[running] com.wdc.WDSmartWareService.plist Support
User Launch Agents: ?
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.divx.agent.postinstall.plist Support
[loaded] com.google.keystone.agent.plist Support
User Login Items: ?
iTunesHelper
AdobeResourceSynchronizer
Skype
EyeTV Helper
MicrosoftMouseHelper
Dropbox
WDQuickView
Internet Plug-ins: ?
Google Earth Web Plug-in: Version: 5.1 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
OfficeLiveBrowserPlugin: Version: 12.3.3 Support
OVSHelper: Version: 1.1 Support
AdobePDFViewerNPAPI: Version: 10.1.12 Support
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
DivXBrowserPlugin: Version: 2.1 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
QuickTime Plugin: Version: 7.7.3
AdobePDFViewer: Version: 10.1.12 Support
EPPEX Plugin: Version: 10.0 Support
Safari Extensions: ?
DivXHTML5
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
DivX Support
Flash Player Support
Flip4Mac WMV Support
Microsoft Mouse Support
Time Machine: ?
Skip System Files: NO
Auto backup: YES
Time Machine not configured!
Top Processes by CPU: ?
      2% WindowServer
      0% fontd
      0% MicrosoftMouseHelper
      0% Dropbox
      0% aosnotifyd
Top Processes by Memory: ?
221 MB Safari
147 MB com.apple.IconServicesAgent
139 MB com.apple.WebKit.WebContent
135 MB com.apple.WebKit.Plugin.64
131 MB Solitaire
Virtual Memory Information: ?
604 MB Free RAM
1.93 GB Active RAM
1010 MB Inactive RAM
504 MB Wired RAM
451 MB Page-ins
0 B Page-outs

After loading mavericks on MacBook Pro (mid2010 i7) the entire system has slowed considerably?

A new software package required a minimum upgrade to OS 10.7. After speaking with an Apple Store rep. He suggested Mavericks as my system was compatible for this upgrade and assured me this would be a "seamless" transition. So I purchased the new software and downloaded/installed Mavericks (10.9.1), the system immediately slowed down significantly, this included Apple apps, my ISP and several Adobe programs as well. As I had opened/unsealed the new software, returning it would be very difficult, so I loaded it...no change.
I would appreciate any positive suggestions.
Thanks

The ISP provides anti virus
Start by removing that. It's completely worthless and also quite likely to be the cause of your problem.
Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
I never install system modifications myself, and I don't know how to uninstall them. You'll have to do your own research to find that information.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmymac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button.
Back up all data before making any changes.
You will generally have to reboot in order to complete an uninstallation. Until you do that, the uninstallation may have no effect, or unpredictable effects.
If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
WARNING: Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" such as "AppCleaner" and the like that purport to remove software.

IMac early 2008 getting slow. EtreCheck summary in french

Hello all,
I have tgis problem with my iMac for a while (I guess since I switched to OS X 10.9).
Some applications are getting slow opening and closing (Mail, Calendar, AddressBook, iPhoto, ...)
For example, active windows of Mail won't close immediately when I click onto the red button. I need to do it many times, switch to another app and back to Mail, and then try again. It is an erratic process. And this happens with other apps.
Rather frustrating.
Here under is the description of my problem in french (pretty much the same as I wrote here in english) and the picture of my iMac by Etrcheck.
If anyone can help, that would be great.
Thank you for your attention.
Description du problème :
Depuis assez longtemps maintenant, mon iMac ralentit.
Il y a en particulier des applications qui demandent à ce que je clique plusieurs fois dessus pour les activer.
Mail par exemple est très lent à l’ouverture. Ouvrir un mail exige parfois que je clique en dehors de la fenêtre pour reclouer dedans à nouveau et tenter d’effacer des mails ou en ouvrir.
iPhoto est également devenu lent.
Carnet d’Adresse aussi.
L’utilisation devient très lente et laborieuse.
EtreCheck version: 2.1.6 (109)
Report generated 20 janvier 2015 12:32:15 UTC+1
Télécharger EtreCheck à http://etresoft.com/etrecheck
Cliquez sur les liens [Aide] pour l’assistance avec les produits non-Apple.
Cliquez sur les liens [Détails] pour plus d'informations sur cette ligne.
Cliquez sur les liens [Adware] pour l’assistance avec la suppression d’adware.
Informations matérielles : ℹ️
Mac (24-inch, Early 2008) (Caractéristiques techniques)
iMac - modèle : iMac8,1
1 2.8 GHz Intel Core 2 Duo CPU : 2-core
4 GB RAM Extensible
BANK 0/DIMM0
2 GB DDR2 SDRAM 800 MHz ok
BANK 1/DIMM1
2 GB DDR2 SDRAM 800 MHz ok
Bluetooth: Vieux - Handoff/Airdrop2 pas disponible
Wireless: en1: 802.11 a/b/g/n
Informations vidéo : ℹ️
ATI Radeon HD 2600 Pro - VRAM : 256 MB
iMac 1920 x 1200
Logiciel du système : ℹ️
OS X 10.10.1 (14B25) - Temps depuis le démarrage : 14 jours 16:11:21
Informations des disques : ℹ️
WDC WD3200AAJS-40VWA0 disk0 : (320,07 GB)
EFI (disk0s1) <non monté> : 210 Mo
Macintosh HD (disk0s2) / : 319.21 Go (58.53 Go libre)
Recovery HD (disk0s3) <non monté> [Restauration] : 650 Mo
Informations USB : ℹ️
Apple, Inc. Keyboard Hub
Apple, Inc Apple Keyboard
Apple Inc. Built-in iSight
Seagate Backup+ SL 1 TB
EFI (disk1s1) <non monté> : 210 Mo
Time Machine 500 Go (disk1s2) /Volumes/Time Machine 500 Go : 500.10 Go (89.15 Go libre)
Stockage 500 Go (disk1s3) /Volumes/Stockage 500 Go : 499.62 Go (323.68 Go libre)
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Gatekeeper : ℹ️
Mac App Store et développeurs identifiés
Extensions du noyau : ℹ️
/Library/Application Support/Roxio
[désengagé] com.roxio.TDIXController (1.1) [Aide]
/System/Library/Extensions
[désengagé] com.wacom.kext.wacomtablet (6.3.3) [Aide]
Agents de lancement systèmes avec un problème : ℹ️
[tué] com.apple.AirPlayUIAgent.plist
[tué] com.apple.CallHistoryPluginHelper.plist
[tué] com.apple.cmfsyncagent.plist
[tué] com.apple.Maps.pushdaemon.plist
[tué] com.apple.printtool.agent.plist
[tué] com.apple.sbd.plist
[tué] com.apple.telephonyutilities.callservicesd.plist
7 processus tués à cause de la pression de mémoire
Daemons de lancement systèmes avec un problème : ℹ️
[tué] com.apple.AssetCacheLocatorService.plist
[tué] com.apple.ctkd.plist
[tué] com.apple.emond.aslmanager.plist
[tué] com.apple.ifdreader.plist
[tué] com.apple.nehelper.plist
[tué] com.apple.periodic-monthly.plist
[tué] com.apple.periodic-weekly.plist
[tué] com.apple.wdhelper.plist
[tué] com.apple.xpc.smd.plist
9 processus tués à cause de la pression de mémoire
Agents de lancement : ℹ️
[engagé] com.google.keystone.agent.plist [Aide]
[en marche] com.wacom.wacomtablet.plist [Aide]
[engagé] org.macosforge.xquartz.startx.plist [Aide]
Daemons de lancements : ℹ️
[engagé] com.adobe.fpsaud.plist [Aide]
[engagé] com.google.keystone.daemon.plist [Aide]
[engagé] com.microsoft.office.licensing.helper.plist [Aide]
[engagé] org.macosforge.xquartz.privileged_startx.plist [Aide]
Agents de lancement pour l’utilisateur : ℹ️
[engagé] com.adobe.ARM.[...].plist [Aide]
Éléments Ouverture : ℹ️
Dropbox Application (/Applications/Dropbox.app)
BitTorrent Application (/Users/[expurgé]/.Trash/BitTorrent.app)
Plug-ins internets : ℹ️
o1dbrowserplugin : Version : 5.38.6.0 - SDK 10.8 [Aide]
WacomNetscape : Version : 1.1.1-1 [Aide]
Default Browser : Version : 600 - SDK 10.10
Flip4Mac WMV Plugin : Version : 2.2.1.11 [Aide]
WacomTabletPlugin : Version : WacomTabletPlugin 2.1.0.2 [Aide]
Silverlight : Version : 4.0.51204.0 [Aide]
FlashPlayer-10.6 : Version : 16.0.0.257 - SDK 10.6 [Aide]
Flash Player : Version : 16.0.0.257 - SDK 10.6 [Aide]
QuickTime Plugin : Version : 7.7.3
googletalkbrowserplugin : Version : 5.38.6.0 - SDK 10.8 [Aide]
SharePointBrowserPlugin : Version : 14.4.4 - SDK 10.6 [Aide]
AdobePDFViewer : Version : 9.5.5 [Aide]
iPhotoPhotocast : Version : 7.0
JavaAppletPlugin : Version : Java 7 Update 51 Vérifier la version
Plug-ins internets pour l’utilisateur : ℹ️
RealPlayer Plugin : Version : Inconnu [Aide]
Extensions de Safari : ℹ️
Awesome Screenshot [Installé]
Searchme [Installé] Adware ! [Remove]
Panneaux de préférences tiers : ℹ️
BDSPrefPane [Aide]
Déjà Vu [Aide]
Flash Player [Aide]
Flip4Mac WMV [Aide]
Time Machine : ℹ️
Ignorer les fichiers du système : NON
Sauvegardes mobiles : Désactivé
Sauvegarde automatique : OUI
Disques sauvegardés :
Macintosh HD : Taille de disque : 319.21 Go Disque utilisé : 260.68 Go
Destinations :
Time Machine 500 Go [Local]
Taille totale : 500.10 Go
Nombre de sauvegardes total : 89
Sauvegardes la plus agée : 2013-11-06 19:50:55 +0000
Dernière sauvegarde : 2015-01-20 10:36:45 +0000
Taille de la disque de sauvegarde : Trop petit
Taille de sauvegarde 500.10 Go > (Disque utilisé 260.68 Go X 3)
L’utilisation du CPU par processus : ℹ️
      6% WindowServer
      0% mds_stores
      0% AppleSpell
      0% iPhoto
      0% launchd
L’utilisation de la RAM par processus : ℹ️
172 Mo Mail
146 Mo iPhoto
146 Mo Finder
116 Mo Numbers
86 Mo Automator
Informations de la mémoire virtuelle : ℹ️
53 Mo RAM Disponible
1.41 Go RAM Active
1.37 Go RAM Inactive
629 Mo RAM Résidente
90.67 Go Pages entrants
2.51 Go Sorties pages
Informations du diagnostic : ℹ️
Jan 20, 2015, 12:45:19 AM /Users/[expurgé]/Library/Logs/DiagnosticReports/garcon_2015-01-20-004519_[expur gé].crash
Jan 20, 2015, 12:29:21 AM /Library/Logs/DiagnosticReports/Automator_2015-01-20-002921_[expurgé].hang
Jan 19, 2015, 08:02:10 PM /Library/Logs/DiagnosticReports/discoveryd_2015-01-19-200210_[expurgé].crash
Jan 19, 2015, 04:37:19 PM /Library/Logs/DiagnosticReports/Mail_2015-01-19-163719_[expurgé].cpu_resource.d iag [Détails]
Jan 18, 2015, 09:45:13 PM /Library/Logs/DiagnosticReports/discoveryd_2015-01-18-214513_[expurgé].crash

Hello there,
Thank you for your interest to my problem.
I've completed the Etrecheck process.
It came up with this:
EtreCheck version: 2.1.6 (109)
Report generated 20 janvier 2015 20:59:05 UTC+1
Télécharger EtreCheck à http://etresoft.com/etrecheck
Cliquez sur les liens [Aide] pour l’assistance avec les produits non-Apple.
Cliquez sur les liens [Détails] pour plus d'informations sur cette ligne.
Cliquez sur les liens [Adware] pour l’assistance avec la suppression d’adware.
Informations matérielles : ℹ️
Mac (24-inch, Early 2008) (Caractéristiques techniques)
iMac - modèle : iMac8,1
1 2.8 GHz Intel Core 2 Duo CPU : 2-core
4 GB RAM Extensible
BANK 0/DIMM0
2 GB DDR2 SDRAM 800 MHz ok
BANK 1/DIMM1
2 GB DDR2 SDRAM 800 MHz ok
Bluetooth: Vieux - Handoff/Airdrop2 pas disponible
Wireless: en1: 802.11 a/b/g/n
Informations vidéo : ℹ️
ATI Radeon HD 2600 Pro - VRAM : 256 MB
iMac 1920 x 1200
Logiciel du système : ℹ️
OS X 10.10.1 (14B25) - Temps depuis le démarrage : 1:23:20
Informations des disques : ℹ️
WDC WD3200AAJS-40VWA0 disk0 : (320,07 GB)
EFI (disk0s1) <non monté> : 210 Mo
Macintosh HD (disk0s2) / : 319.21 Go (107.86 Go libre)
Recovery HD (disk0s3) <non monté> [Restauration] : 650 Mo
Informations USB : ℹ️
Apple Inc. Built-in iSight
Seagate Backup+ SL 1 TB
EFI (disk1s1) <non monté> : 210 Mo
Time Machine 500 Go (disk1s2) /Volumes/Time Machine 500 Go : 500.10 Go (86.53 Go libre)
Stockage 500 Go (disk1s3) /Volumes/Stockage 500 Go : 499.62 Go (323.68 Go libre)
Apple, Inc. Keyboard Hub
Apple, Inc Apple Keyboard
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper : ℹ️
Mac App Store et développeurs identifiés
Extensions du noyau : ℹ️
/Library/Application Support/Roxio
[désengagé] com.roxio.TDIXController (1.1) [Aide]
/System/Library/Extensions
[désengagé] com.wacom.kext.wacomtablet (6.3.3) [Aide]
Agents de lancement : ℹ️
[engagé] com.google.keystone.agent.plist [Aide]
[en marche] com.wacom.wacomtablet.plist [Aide]
[engagé] org.macosforge.xquartz.startx.plist [Aide]
Daemons de lancements : ℹ️
[engagé] com.adobe.fpsaud.plist [Aide]
[engagé] com.google.keystone.daemon.plist [Aide]
[engagé] com.microsoft.office.licensing.helper.plist [Aide]
[engagé] org.macosforge.xquartz.privileged_startx.plist [Aide]
Agents de lancement pour l’utilisateur : ℹ️
[engagé] com.adobe.ARM.[...].plist [Aide]
Éléments Ouverture : ℹ️
Dropbox Application (/Applications/Dropbox.app)
Plug-ins internets : ℹ️
o1dbrowserplugin : Version : 5.38.6.0 - SDK 10.8 [Aide]
WacomNetscape : Version : 1.1.1-1 [Aide]
Default Browser : Version : 600 - SDK 10.10
Flip4Mac WMV Plugin : Version : 2.2.1.11 [Aide]
WacomTabletPlugin : Version : WacomTabletPlugin 2.1.0.2 [Aide]
Silverlight : Version : 4.0.51204.0 [Aide]
FlashPlayer-10.6 : Version : 16.0.0.257 - SDK 10.6 [Aide]
Flash Player : Version : 16.0.0.257 - SDK 10.6 [Aide]
QuickTime Plugin : Version : 7.7.3
googletalkbrowserplugin : Version : 5.38.6.0 - SDK 10.8 [Aide]
SharePointBrowserPlugin : Version : 14.4.4 - SDK 10.6 [Aide]
AdobePDFViewer : Version : 9.5.5 [Aide]
iPhotoPhotocast : Version : 7.0
JavaAppletPlugin : Version : Java 7 Update 51 Vérifier la version
Plug-ins internets pour l’utilisateur : ℹ️
RealPlayer Plugin : Version : Inconnu [Aide]
Panneaux de préférences tiers : ℹ️
BDSPrefPane [Aide]
Déjà Vu [Aide]
Flash Player [Aide]
Flip4Mac WMV [Aide]
Time Machine : ℹ️
Ignorer les fichiers du système : NON
Sauvegardes mobiles : Désactivé
Sauvegarde automatique : OUI
Disques sauvegardés :
Macintosh HD : Taille de disque : 319.21 Go Disque utilisé : 211.36 Go
Destinations :
Time Machine 500 Go [Local]
Taille totale : 500.10 Go
Nombre de sauvegardes total : 89
Sauvegardes la plus agée : 2013-11-06 19:50:55 +0000
Dernière sauvegarde : 2015-01-20 14:14:55 +0000
Taille de la disque de sauvegarde : Trop petit
Taille de sauvegarde 500.10 Go > (Disque utilisé 211.36 Go X 3)
L’utilisation du CPU par processus : ℹ️
      17% sandboxd
      7% QuickLookSatellite
      7% WindowServer
      2% Finder
      1% VTDecoderXPCService
L’utilisation de la RAM par processus : ℹ️
223 Mo mds_stores
159 Mo Mail
142 Mo Finder
129 Mo Dock
103 Mo Dropbox
Informations de la mémoire virtuelle : ℹ️
52 Mo RAM Disponible
1.77 Go RAM Active
1.73 Go RAM Inactive
552 Mo RAM Résidente
17.83 Go Pages entrants
273 Mo Sorties pages
Informations du diagnostic : ℹ️
Jan 20, 2015, 08:33:10 PM /Users/[expurgé]/Library/Logs/DiagnosticReports/quicklookd_2015-01-20-203310_[e xpurgé].crash
Jan 20, 2015, 07:36:21 PM Examen de soi - succès
From comparaison with previous check, it appears i recovered Hard Drive memory: from 58.53 to 107.86 Go.
I don't see the Safari item anymore. Nor the Bit Torrent stuff.
Mail seems to be more efficient. But when OS X reinstalled, Mail opened at first with re-load of all mails; i saw 23 569 mails total reloaded from SENT, to DRAFT, RECEIVED, etc ... for the last 10 years. Some of the mails have files included. Could be the problem for Mail being so slow. Even now when I open Mail it takes time to order properly all emails by date (and this is only for the INBOX display)
I don't know for the RAM. Kind of expensive and the result might not be as expected.
I still can't take screenshot with the keyboard shortcuts... something went wrong i don't know what. If someone has a clue I could then send shots of some of my windows to make sure I have things right.
Lionnel

System gets slow

Similar Messages

Maybe you are looking for