System getting shutdown

my system is getting shutdown often and before getting shutdown one blue screen appears and showing some dumping percentage. also some low disk space error...........how can i fix it?

i hav copied evrthng here..............plse copy and paste into a notepad so it will be clear to u....................i cnt understand anythng
==================================================Dump File : 110611-19016-01.dmpCrash Time : 06-11-2011 03:49:30Bug Check String : KERNEL_MODE_EXCEPTION_NOT_HANDLEDBug Check Code : 0x1000008eParameter 1 : 0xc0000005Parameter 2 : 0x915d46bcParameter 3 : 0xb5c07678Parameter 4 : 0x00000000Caused By Driver : dxgmms1.sysCaused By Address : dxgmms1.sys+1d6bcFile Description : DirectX Graphics MMSProduct Name : Microsoft® Windows® Operating SystemCompany : Microsoft CorporationFile Version : 6.1.7601.17554 (win7sp1_gdr.110202-1504)Processor : 32-bitCrash Address : dxgmms1.sys+1d6bcStack Address 1 : dxgmms1.sys+1df53Stack Address 2 : dxgmms1.sys+132bStack Address 3 : dxgkrnl.sys+27491Computer Name : Full Path : C:\Windows\Minidump\110611-19016-01.dmpProcessors Count : 2Major Version : 15Minor Version : 7601Dump File Size : 147,200==================================================
==================================================Dump File : 110511-18189-01.dmpCrash Time : 05-11-2011 20:36:39Bug Check String : KERNEL_MODE_EXCEPTION_NOT_HANDLEDBug Check Code : 0x1000008eParameter 1 : 0xc0000005Parameter 2 : 0x9221d6bcParameter 3 : 0x9c5e4678Parameter 4 : 0x00000000Caused By Driver : dxgmms1.sysCaused By Address : dxgmms1.sys+1d6bcFile Description : DirectX Graphics MMSProduct Name : Microsoft® Windows® Operating SystemCompany : Microsoft CorporationFile Version : 6.1.7601.17554 (win7sp1_gdr.110202-1504)Processor : 32-bitCrash Address : dxgmms1.sys+1d6bcStack Address 1 : dxgmms1.sys+1df53Stack Address 2 : dxgmms1.sys+132bStack Address 3 : dxgkrnl.sys+27491Computer Name : Full Path : C:\Windows\Minidump\110511-18189-01.dmpProcessors Count : 2Major Version : 15Minor Version : 7601Dump File Size : 147,200==================================================
==================================================Dump File : 110511-27924-01.dmpCrash Time : 05-11-2011 20:21:27Bug Check String : KERNEL_MODE_EXCEPTION_NOT_HANDLEDBug Check Code : 0x1000008eParameter 1 : 0xc0000005Parameter 2 : 0x922e56bcParameter 3 : 0x9bdb7678Parameter 4 : 0x00000000Caused By Driver : dxgmms1.sysCaused By Address : dxgmms1.sys+1d6bcFile Description : DirectX Graphics MMSProduct Name : Microsoft® Windows® Operating SystemCompany : Microsoft CorporationFile Version : 6.1.7601.17554 (win7sp1_gdr.110202-1504)Processor : 32-bitCrash Address : dxgmms1.sys+1d6bcStack Address 1 : dxgmms1.sys+1df53Stack Address 2 : dxgmms1.sys+132bStack Address 3 : dxgkrnl.sys+27491Computer Name : Full Path : C:\Windows\Minidump\110511-27924-01.dmpProcessors Count : 2Major Version : 15Minor Version : 7601Dump File Size : 147,200==================================================
==================================================Dump File : 110511-17565-01.dmpCrash Time : 05-11-2011 04:16:38Bug Check String : SYSTEM_THREAD_EXCEPTION_NOT_HANDLEDBug Check Code : 0x1000007eParameter 1 : 0x80000003Parameter 2 : 0x832bd0d8Parameter 3 : 0x8fb37b8cParameter 4 : 0x8fb37770Caused By Driver : drone.sysCaused By Address : drone.sys+11ecFile Description : Bzeek DroneProduct Name : BzeekCompany : BzeekLand LTD.File Version : 0.9.179Processor : 32-bitCrash Address : ntkrnlpa.exe+7b0d8Stack Address 1 : drone.sys+2176Stack Address 2 : drone.sys+51d5Stack Address 3 : drone.sys+48e1Computer Name : Full Path : C:\Windows\Minidump\110511-17565-01.dmpProcessors Count : 2Major Version : 15Minor Version : 7601Dump File Size : 147,200==================================================
==================================================Dump File : 110511-22354-01.dmpCrash Time : 05-11-2011 04:11:23Bug Check String : KERNEL_MODE_EXCEPTION_NOT_HANDLEDBug Check Code : 0x1000008eParameter 1 : 0xc0000005Parameter 2 : 0x90ddc6bcParameter 3 : 0x9c1c0678Parameter 4 : 0x00000000Caused By Driver : dxgmms1.sysCaused By Address : dxgmms1.sys+1d6bcFile Description : DirectX Graphics MMSProduct Name : Microsoft® Windows® Operating SystemCompany : Microsoft CorporationFile Version : 6.1.7601.17554 (win7sp1_gdr.110202-1504)Processor : 32-bitCrash Address : dxgmms1.sys+1d6bcStack Address 1 : dxgmms1.sys+1df53Stack Address 2 : dxgmms1.sys+132bStack Address 3 : dxgkrnl.sys+27491Computer Name : Full Path : C:\Windows\Minidump\110511-22354-01.dmpProcessors Count : 2Major Version : 15Minor Version : 7601Dump File Size : 147,200==================================================
==================================================Dump File : 110311-20560-01.dmpCrash Time : 03-11-2011 22:42:27Bug Check String : KERNEL_MODE_EXCEPTION_NOT_HANDLEDBug Check Code : 0x1000008eParameter 1 : 0xc0000005Parameter 2 : 0x91d086bcParameter 3 : 0xb803f678Parameter 4 : 0x00000000Caused By Driver : dxgmms1.sysCaused By Address : dxgmms1.sys+1d6bcFile Description : DirectX Graphics MMSProduct Name : Microsoft® Windows® Operating SystemCompany : Microsoft CorporationFile Version : 6.1.7601.17554 (win7sp1_gdr.110202-1504)Processor : 32-bitCrash Address : dxgmms1.sys+1d6bcStack Address 1 : dxgmms1.sys+1df53Stack Address 2 : dxgmms1.sys+132bStack Address 3 : dxgkrnl.sys+27491Computer Name : Full Path : C:\Windows\Minidump\110311-20560-01.dmpProcessors Count : 2Major Version : 15Minor Version : 7601Dump File Size : 147,200==================================================
==================================================Dump File : 102411-21465-01.dmpCrash Time : 24-10-2011 22:42:22Bug Check String : SYSTEM_THREAD_EXCEPTION_NOT_HANDLEDBug Check Code : 0x1000007eParameter 1 : 0xc0000005Parameter 2 : 0x8329bae4Parameter 3 : 0xe1813700Parameter 4 : 0xe18132e0Caused By Driver : tcpip.sysCaused By Address : tcpip.sys+10bd5File Description : TCP/IP DriverProduct Name : Microsoft® Windows® Operating SystemCompany : Microsoft CorporationFile Version : 6.1.7600.16385 (win7_rtm.090713-1255)Processor : 32-bitCrash Address : ntkrnlpa.exe+9bae4Stack Address 1 : tcpip.sys+10bd5Stack Address 2 : tcpip.sys+10b93Stack Address 3 : tcpip.sys+76fbdComputer Name : Full Path : C:\Windows\Minidump\102411-21465-01.dmpProcessors Count : 2Major Version : 15Minor Version : 7601Dump File Size : 147,200==================================================
==================================================Dump File : 091311-27128-01.dmpCrash Time : 13-09-2011 13:28:16Bug Check String : KERNEL_DATA_INPAGE_ERRORBug Check Code : 0x0000007aParameter 1 : 0x00000020Parameter 2 : 0xc000009dParameter 3 : 0x8749bbdcParameter 4 : 0x00000000Caused By Driver : ntkrnlpa.exeCaused By Address : ntkrnlpa.exe+74b5cFile Description : NT Kernel & SystemProduct Name : Microsoft® Windows® Operating SystemCompany : Microsoft CorporationFile Version : 6.1.7601.17640 (win7sp1_gdr.110622-1506)Processor : 32-bitCrash Address : ntkrnlpa.exe+74b5cStack Address 1 : ntkrnlpa.exe+34a8bStack Address 2 : ntkrnlpa.exe+b1706Stack Address 3 : ntkrnlpa.exe+7e645Computer Name : Full Path : C:\Windows\Minidump\091311-27128-01.dmpProcessors Count : 2Major Version : 15Minor Version : 7601Dump File Size : 153,568==================================================
ths s hw it appear in upper column

Similar Messages

HP Photosmart Plus B209a-m wireless goes offline after system is shutdown

I am using the HP Photosmart Plus B209a-m on a Dell XPS 16 with Windows 7 64bit. I have setup the printer to connect to the Belkin wireless router so it is on the network. I have setup the printer numerous times and had it working over wireless many times. After the PC is shutdown the printer goes offline. I have to rerun setup over and over again to bring wireless back online. I added the MAC address to the Belkin router, and I have the device trusted in my Norton Firewall. I keep seeing "HP Network Support Automatic (Delayed Start)" in services, but changing it does not seem to make any difference I still need to rerun setup again after the system is shutdown. I am also seeing two printer icons in Devices and Printers. One is just the Photosmart Printer with a generic printer icon; and the second is Photosmart Printer, Scanner, Copier with a picture of the Photosmart which I believe it should be. I have run the setup at least 10 times, and I keep getting a good working wireless system then after the machine is shutdown for the day the printer goes offline and will not print again. How can I prevent the printer from going offline in wireless mode?
This question was solved.
View Solution.

Setting a static IP address may help this issue:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you know what that is, set an IP outside that range but no higher than 254 (the last number in the address). If you do not know this, enter the current IP address.
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Leave the gateway and DNS blank. Click 'Apply
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

After installing Mavericks,it get shutdown frequently

Hi ,
Once i install Mavericks in my MacMini,it get shutdown frequently.

Hello,
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
Also...
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed. Or an errant process eating up RAM.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

While doing PGI I system getting Error

Dear SD Experts,
While doing PGI in delivery system getting Error "The batches are not defined for delivery item 000010".
Error Massage :- Message no. VL605
I already defined Batches to the given item. Its appearing Under Material and its specified in Batch split Tab.
Kindly suggest me where I was wrong and what configuration I missed.
Regards,
Manzoor Ahmad

hi
select the stock against the batch which should be equal to delivery quantity.
that means delivery quanquantity should be equal to picing quantity.
after selecting manually press F3 to go back.
system will give a POP UP message say YES
then the batches against the quantity will be copied in the delivery document
again go back you will come to over view of delivey screen
then in picking tab page you will find all picked quantity if not give it manually
and save the delivery document with out pressing PGI.
hope this clears your issue
balajia

New HD and OS installed, but system gets slower as time goes by

I have just put in a new 250GB HD, a new DVD-R drive, and installed a new OS(10.4.11). When the Powerbook first boots up, it works fine, but as time goes by(just a few minutes even), the system gets bogged down and eventually grinds to a halt. I've been told the HD is "leaking" to a file and the file is getting bigger and bigger to the point that the system can't run. I've watched the HD and I don't see any files getting bigger, but the HD "GB available" gets smaller and smaller(starting at 221GB and going down to below 200GB. Not sure what to do next. Please help.

Use Activity Monitor to see what is hogging your CPU cycles and slowing the machine down. The difference between 200GB available and 221GB available is not causing the slowdown. The process that is consuming enough CPU cycles to write 21GB of data to the hard drive is your problem.

System gets Slow after 10.6.5 update

So, I just updated it using standalone combo installer and straight away notice that to repair the disc permitions now takes 3 mins, before it took only 1min. even if there is nothing to repair. and futher more my whole system gets very slow after a few hours of using safari, skype, vuze, together and wasn't able to shut down just after using safari alone, had to press the power. havent been using anything else for so long so dont know how about it, but it seems to be ok. ah, im using airport to get to the internet if that's important.

See:
Mac Maintenance Quick Assist,
Mac OS X speed FAQ,
Speeding up Macs,
Macintosh OS X Routine Maintenance
Essential Mac Maintenance: Get set up,
Essential Mac Maintenance: Rev up your routines,
Maintaining OS X,
Five Mac maintenance myths, and
Myths of required versus not required maintenance for Mac OS X for information.

After system restore ,we are not able to activate the windows,while login to systems getting an error 0x800700B7

after system restore ,we are not able to activate the windows, while login to systems getting an error 0x800700B7
Cont-8096688758

hi Jain,
you may need to check the transfer structures,
right click infosource and 'change', click 'comm.structure'/expand,
click 'transfer', move the 0BASE_UOM from left to right side,
or if you wont use the comm structure anymore, you can right click infosource and 'delete comm structure'
hope this helps.

While connecting the MSSQL (2000, 2005) to BI 7 in rsa1 source system getti

While connecting the MSSQL (2000, 2005) to BI 7 in rsa1 source system getting below error.
(When calling a function within the database interface, a return value which cannot be processed by the calling function was provided.)
Please help me to solve these issues.
Iu2019m able to connect Oracle 10.g as source system and can view the tables and views.
BI 7
Windows 64 bit
Oracle 10 .2
SAP GUI 7.
Advance Thanks,
KARAN
Edited by: Harish Karan on Jun 26, 2008 2:51 PM

Hello All,
I found the solution for my particular situation!
When checking the runtime object for CLU4, an inconsistency in the runtime object popped up:
- the ABAP dictionary contains the field K5N1
- the DB dictionry contains the field name K5N01
This is a known and documented inconsistency, see note 902817 for the description.
BUT: the solution pointed out there is wrong! The note suggests to delete all content from the physical tables and then activate the table in SE14. This is not possible for cluster tables neither in SE14 nor in SE11.
This solution worked for me for both CLU4 and VER_CLUSTR:
- as the tables should be empty normally I dropped them in the database
- unlock the shadow instance with SAPup
- log on on to the shadow instance
- I then made some arbitrary change to the table definition in SE 11 (like adding a field). Make sure to maintain the size class also, otherwise the table won't be activated
- save the changes and activate the tables
- take back the previous change
- save and activate again
- lock the shadow instance
- restart the upgrade phase
Once the upgrade is done, check whether the physical table exists in the DB.
Hope this helps!
Regards,
Matthias.
Edited by: Matthias Dörfel on Nov 18, 2011 3:14 PM

Weblogic is getting shutdown by calling Class.forName("className")

Hi,
I have written the following code and it's running thru a web application in Weblogic. The problem is when calling Class.forName(), the weblogic server 9.2 gets shutdown.
final static private String[] uib_cn = {
"com.realm.portal.cda.ui.UIBuilder",
"com.realm.rcash.rcoll.cda.ui.RCollUIBuilder",
"com.realm.rcash.rpay.cda.ui.RPayUIBuilder"
static {
// Init the Constructor object for each UI builder class
for (int i = 0; i <uib_cn.length; i++) {
try {
Class<?> c = Class.forName(uib_cn);
uic[i] = c.getConstructor(IRbacParamsBean.class);
} catch (Exception e) {
log.error(e.getMessage(), e);
The class containing this code in a jar file, is trying to load at runtime other class files which are in separate jar but all the jars are in same location WEB-INF/lib.
Plz anyone can help me why this is happening and how to resolve this?
Thanks & Regards
Chanchal

Is it due to an unhandled exception in the static initializer block? Are those classes available?

Display on Qosmio F60-10U Turns Mozaic and System Getting Hang

From The Day I purchased F60-10U; i am facing thins problem. My display occasionally Turns into Mozaic and same time System Getting Hang. only thing i can do is restart with power button.
i had given to service center; they told that its because of virus and need to be formatted. as i was 100% sure that its not because of virus; i took back from there.
I had tried below:
1. Update Display Driver
2. Downgrade Display Driver
3. Factory reset
4. Scan for virus with various engines
5. Updated All Drivers
Nothing works...
Anybody else has got same problem?
Hope that i can get some fix for this.
Here is a Picture of Display when its Happens.
Link:[http://www.glowfoto.com/static_image/11-120740L/7879/jpg/09/2010/img4/glowfoto]
Rgrds,
Chintan

I dont think this issue has anything to do with virus and I believe graphic card is defective. All you have done is right and after factory image installation virus will be killed and everything should work well.
Contact service again, let them test with factory settings and if the same will happen again I presume they will exchange motherboard.

File system getting full // dev_icmmon rapidly increasing

Hello All,
/sapmnt/SID/profile file system getting full
/in this file system dev_icmmon rapidly increasing
more dev_icmmon
[Thr 258] **** SigHandler: signal 1 received
[Thr 01] *** ERROR => IcmReadAuthFile: could not open authfile: icmauth.txt - errno: 2 [icxxsec_mt.c 728]
[Thr 258] **** SigHandler: signal 1 received
[Thr 01] *** ERROR => IcmReadAuthFile: could not open authfile: icmauth.txt - errno: 2 [icxxsec_mt.c 728]
please help me to resolve the issue
Regards
Mohsin M

I have killed icmon process ..now problem is solved

DB NOt Getting Shutdown

HI
db - 9i
shutdown immediteits not getting shutdown
den i closed the sessin.
i tried again..
its telling that its already runing.. how i kill the old one..
thanks

Hi user13025265,
Sometimes we see a line in the alert.log file which is;
Example:
"Active call for process 10061 user 'oracle' program 'oracle@optprod (J001)'
SHUTDOWN: waiting for active calls to complete."
If you do have such error above create another session and login as root. Type kill -9 10061
I have to see your alert.log file whether the shutdown is waiting for a particular session for a rollback transaction or a user.

How to get notify when system get wakeup call and gets connected to internet?

Hi,
In my project I need to get notify when system wakes up from sleep and also while system gets connected to WAN or LAN.Can any one please give suggestion on this.Thanx:).

Your entire Utilities folder and/or its contents was deleted?
If so, I suggest performing an Archive & Install selecting preserve user and network settings. If not and you don't know exactly what your boy deleted (have you checked the Trash?), performing an A&I will take care of everything known or unknown at once.
http://www.thexlab.com/faqs/archiveinstall.html
Now is also a good time to create a backup - preferably a bootable clone backup of your entire hard drive saved to an external firewire drive used for backup purposes only.
And I also suggest creating a computer login account for your boy WITHOUT admin privileges and disable automatic login for your admin account which will require manually entering your log in password for your admin account during a computer startup, restart and with Fast User Switching.
Before stepping away from your Mac or whenever it will be used by anyone that is unattended by you, log out from your account.
Keep the install package for your Mac in a safe place but in a location that is not known by your boy.
http://www.apple.com/macosx/features/family/

CRM-BI when i create infopackage system gets dump

Hi All,
I was changed the source system with BDLS. And in the new system i want to get data from source system to BI system. When i try, system gets the dump.
The dump details:
Trigger Location of Runtime Error
    Program                                 SAPLRSSM
    Include                                 LRSSMU17
    Row                                     2.624
    Module type                             (FUNCTION)
    Module Name                             RSSM_CALL_RSAR_DATA_REQUEST_1
Line                 SourceCde
2601               if p_t_rsldpio-crt_package is initial.
2602                 try.
2603                     if l_s_dta_odsactreq-tlogo = rs_c_tlogo-ods_object and
2604                    l_s_dta_odsactreq-odsotype = rsdod_c_type-write_optimized.
2605                       call function 'RSS2_WRITEOPT_DSO_ACTREQ'
2606                         exporting
2607                           i_rnr = g_rnr
2608                           i_sid = g_rnr_sid
2609                           i_ods = l_upd_icube-infocube.
2610                     endif.
2611                     call method cl_rsodso_update_control=>begin_update
2612                       exporting
2613                         i_request_guid = g_rnr
2614                         i_odsobject    = l_upd_icube-infocube.
2615                   catch cx_rsodso_root.
2616                     loop at l_upd_icube.
2617                       call function 'DEQUEUE_ERSICCONT'
2618                         exporting
2619                           mode_rsiccont = 'E'
2620                           icube         = l_upd_icube-infocube
2621                           _scope        = '3'
2622                           _synchron     = 'X'.
2623                     endloop.
>>>>>                     message x000. // I GET DUMP HERE.
2625                 endtry.
2626               endif.
2627             endif.
2628           endif.
thanks for help,
David.

Hi,
Error code shows that you are trying to update DSO/cube.
Are you able to create any other object in the system, I mean is object chagability allowed.
Regards
Rahul Bindroo

Database is not getting shutdown when using command "stopsap all"

I installed ERP 2005(ECC6.0) using oracle on HP-UX with SID=ER1, The installation was successful, but I am facing two issues now.
1. When I stop sap using command 'stopsap all' only instances is getting shutdown not the database, I have to Explicitly shutdown the database (oracle).
rp34-109:er1adm 26> stopsap all
Checking ER1 Database
ABAP Database is running
Stopping the SAP instance DVEBMGS01
Shutdown-Log is written to /home/er1adm/stopsap_DVEBMGS01.log
Instance on host rp34-109 stopped
Waiting for cleanup of resources............................
Stopping the SAP instance SCS02
Shutdown-Log is written to /home/er1adm/stopsap_SCS02.log
Instance on host rp34-109 stopped
Waiting for cleanup of resources.........
Database is still running on remote DB server
Log on to DB server and stop database
TRANS.LOG
OCI-call failed with -1=OCI_ERROR                   2066 0.175292
4 ETW000 [dev trc     ,00000]     SQL error 942: 'ORA-00942: table or view does not exist'
4 ETW000                                                                              71 0.175363
4 ETW000 [dbsloci.    ,00000] *** ERROR => ORA-942 when accessing table SAPUSER
4 ETW000                                                                             115 0.175478
4 ETW000 [dev trc     ,00000]     set_ocica() -> OCI or SQL return code 942          50 0.175528
4 ETW000 [dev trc     ,00000] Disconnecting from connection 0 ...                  205 0.175733
4 ETW000 [dev trc     ,00000] Rolling back transaction ...                         127 0.175860
4 ETW000 [dev trc     ,00000] Closing user session (con_hdl=0,svchp=0x80000001010858c0,usrhp=0x8000000101075a70)
4 ETW000                                                                             272 0.176132
4 ETW000 [dev trc     ,00000] Now I'm disconnected from ORACLE                     844 0.176976
4 ETW000 [dev trc     ,00000] Try to connect with default password                  42 0.177018
4 ETW000 [dev trc     ,00000] Connecting as SAPER1/<pwd>@ER1 on connection 0 (nls_hdl 0) ... (dbsl 700 010307)
The Second issue that I am facing is with the dbs_ora_schema= SAPSR3,
but my SID is ER1, it should display SAPER1, can anyone help in changing this.
I tried changing this in .dbenv_hostname.csh & sh files but changing that I even unable to start sap again

Hi
Pls follow the notes 400241,662644.
If u follow above notes you get the result.
Feel free to revert back
Pls provide the points if u get the answer.
---venakt.

System getting shutdown

Similar Messages

Maybe you are looking for