System hang during installation of Solaris 10

Dear all,
Solaris 10 x86 6/06 installation on Magic-Pro MP-P6PE-1000
mainboard.
I have tried on PC and VMware 5.5.1, but fail the installation.
Moreover, I have tried append "-kd" at "kernal ...cdrom" in GRUB edit mode, and then boot the system.
type "use_mp/W 0 :c"
But it still hang at:
SunOS Release 5.10 Version Generic_118855-14 32-bit
Copyright 1983-2005 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
or
configuring devices
hang!!
I've also try disable/enable ACPI, but no success.
Have any ideas?
Thanks!

Try to boot the kernel with the "-v" option, any maybe even set
"moddebug to 80000000", so that we can get a better idea
where it is hanging.
Check the following web page for details:
http://blogs.sun.com/roller/page/dmick?entry=diagnosing_kernel_hangs_panics_with

Similar Messages

Mac OSX Installer Hangs During Installation

Macbook Pro 15"
Core 2 Duo 2.53Ghz
4Gb RAM
9400M
Erased Hard Disk,
Boot from CD
Mac OSX installer hangs during installation
Time remaining remains the same for >3 hours
After clicking get spinny beachball cursor.
What should I do?
Thanks.

The installer may actually not be hunging, in my installation on Win XP, I have seen it "pause" at this point for 5 min or more before continuing with the installation to a successful completion, I did not try to do anything to assist it. Try giving it more time and see what happens.
Regards,
Joseph

Ipad system hang during itune upgrading

ipad system hang during itune upgrading

Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.

SAP ECC6.0 SR3 on Oracl 10 g solaris 10 hangs during installation!!!

Hi,
I am installting SAP ECC 6.0 SR3 with DB oracle 10g OS solaris 10 jdk version java version "1.4.2_16"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_16-b05)
Java HotSpot(TM) Client VM (build 1.4.2_16-b05, mixed mode)
H/W : T6320 Blade server
Memory : 16GB
during installation at Import ABAP phase while importing last package SAPSSEXC it hung on me there were no error logs as such nor the FS was full...
it resumed after couple of hrs..
but hung again at IMport Java Dump phase
and again no error logs...
so, my concern here is that is there any bug in SR3 or i am not able to find the error logs
the logs i check are:
import_monitor.java.log:
tail -100f import_monitor.java.log
java version "1.4.2_16"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_16-b05)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_16-b05, mixed mode)
Import Monitor jobs: running 1, waiting 1, completed 26, failed 0, total 28.
Loading of 'SAPSSEXC' import package: OK
Import Monitor jobs: running 0, waiting 1, completed 27, failed 0, total 28.
Import Monitor jobs: running 1, waiting 0, completed 27, failed 0, total 28.
Loading of 'SAPVIEW' import package: OK
Import Monitor jobs: running 0, waiting 0, completed 28, failed 0, total 28.
jload.java.log>>while import java dump phase:
tail -100f jload.java.log
INFO: trying to create table CAF_RT_NUMRNG
Sep 12, 2008 12:47:46 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_NUMRNG created
Sep 12, 2008 12:47:46 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_NUMRNG loaded (0 rows)
Sep 12, 2008 12:47:46 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_PERM_REL
Sep 12, 2008 12:47:47 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_PERM_REL created
Sep 12, 2008 12:47:47 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_PERM_REL loaded (0 rows)
Sep 12, 2008 12:47:47 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_PK_GEN
Sep 12, 2008 12:47:48 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_PK_GEN created
Sep 12, 2008 12:47:48 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_PK_GEN loaded (0 rows)
Sep 12, 2008 12:47:48 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_SRVMODULE
Sep 12, 2008 12:47:48 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_SRVMODULE created
Sep 12, 2008 12:47:48 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_SRVMODULE loaded (0 rows)
Sep 12, 2008 12:47:48 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_SVCCFG
Sep 12, 2008 12:47:49 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_SVCCFG created
Sep 12, 2008 12:47:49 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_SVCCFG loaded (0 rows)
Sep 12, 2008 12:47:49 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_SVCDEF
Sep 12, 2008 12:47:51 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_SVCDEF created
Sep 12, 2008 12:47:51 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_SVCDEF loaded (0 rows)
Sep 12, 2008 12:47:51 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_SVCLCK
Sep 12, 2008 12:47:51 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_SVCLCK created
Sep 12, 2008 12:47:51 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_SVCLCK loaded (0 rows)
Sep 12, 2008 12:47:51 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_SYSCFG
Sep 12, 2008 12:47:52 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_SYSCFG created
Sep 12, 2008 12:47:52 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_SYSCFG loaded (0 rows)
Sep 12, 2008 12:47:52 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_TREX_ATTR
Sep 12, 2008 12:47:53 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_TREX_ATTR created
Sep 12, 2008 12:47:53 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_TREX_ATTR loaded (0 rows)
Sep 12, 2008 12:47:53 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_TREX_FAILED
Sep 12, 2008 12:47:54 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_TREX_FAILED created
Sep 12, 2008 12:47:54 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_TREX_FAILED loaded (0 rows)
Sep 12, 2008 12:47:54 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_TREX_IDX
Sep 12, 2008 12:47:55 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_TREX_IDX created
Sep 12, 2008 12:47:55 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_TREX_IDX loaded (0 rows)
Sep 12, 2008 12:47:55 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_TREX_LINKS
Sep 12, 2008 12:47:56 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_TREX_LINKS created
Sep 12, 2008 12:47:56 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_TREX_LINKS loaded (0 rows)
Sep 12, 2008 12:47:56 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_TYPCEL
Sep 12, 2008 12:47:57 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_TYPCEL created
Sep 12, 2008 12:47:57 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_TYPCEL loaded (0 rows)
Sep 12, 2008 12:47:57 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_TYPCOT
Sep 12, 2008 12:47:58 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_TYPCOT created
Sep 12, 2008 12:47:58 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_TYPCOT loaded (0 rows)
Sep 12, 2008 12:47:58 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_TYPELE
Sep 12, 2008 12:47:58 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_TYPELE created
Sep 12, 2008 12:47:58 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_TYPELE loaded (0 rows)
Sep 12, 2008 12:47:58 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_TYPMES
Sep 12, 2008 12:48:00 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_TYPMES created
Sep 12, 2008 12:48:00 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_TYPMES loaded (0 rows)
Sep 12, 2008 12:48:00 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_TYPMMP
Sep 12, 2008 12:48:00 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_TYPMMP created
Sep 12, 2008 12:48:00 PM com.sap.inst.jload.Jload dbImport
jload.log>>while import java dump phase :
tail -100f jload.log
12.09.08 12:48:18 com.sap.inst.jload.Jload dbImport
INFO: CAF_UM_RELGR_MEMBS loaded (0 rows)
12.09.08 12:48:18 com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_UM_RELGR_TEXTS
12.09.08 12:48:19 com.sap.inst.jload.Jload dbImport
INFO: table CAF_UM_RELGR_TEXTS created
12.09.08 12:48:19 com.sap.inst.jload.Jload dbImport
INFO: CAF_UM_RELGR_TEXTS loaded (0 rows)
12.09.08 12:48:19 com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_UM_RELGR_WORDS
12.09.08 12:48:20 com.sap.inst.jload.Jload dbImport
INFO: table CAF_UM_RELGR_WORDS created
12.09.08 12:48:20 com.sap.inst.jload.Jload dbImport
INFO: CAF_UM_RELGR_WORDS loaded (0 rows)
12.09.08 12:48:20 com.sap.inst.jload.Jload dbImport
INFO: trying to create table J2EE_CONFIG
12.09.08 12:48:21 com.sap.inst.jload.Jload dbImport
INFO: table J2EE_CONFIG created
12.09.08 12:48:49 com.sap.inst.jload.Jload dbImport
INFO: J2EE_CONFIG loaded (9195 rows)
12.09.08 12:48:49 com.sap.inst.jload.Jload dbImport
INFO: trying to create table J2EE_CONFIGENTRY
12.09.08 12:48:50 com.sap.inst.jload.Jload dbImport
INFO: table J2EE_CONFIGENTRY created
12.09.08 13:44:02 com.sap.inst.jload.Jload dbImport
INFO: J2EE_CONFIGENTRY loaded (20235 rows)
12.09.08 13:44:02 com.sap.inst.jload.Jload dbImport
INFO: trying to create table J2EE_KEYSEQUENCE
12.09.08 13:44:03 com.sap.inst.jload.Jload dbImport
INFO: table J2EE_KEYSEQUENCE created
12.09.08 13:44:03 com.sap.inst.jload.Jload dbImport
INFO: J2EE_KEYSEQUENCE loaded (1 rows)
12.09.08 13:44:03 com.sap.inst.jload.Jload dbImport
INFO: trying to create table SP_PLUG_IN_SAVES
12.09.08 13:44:04 com.sap.inst.jload.Jload dbImport
INFO: table SP_PLUG_IN_SAVES created
12.09.08 13:44:04 com.sap.inst.jload.Jload dbImport
INFO: SP_PLUG_IN_SAVES loaded (0 rows)
12.09.08 13:44:04 com.sap.inst.jload.Jload dbImport
INFO: trying to create table SP_RESULTS
12.09.08 13:44:04 com.sap.inst.jload.Jload dbImport
INFO: table SP_RESULTS created
12.09.08 13:44:04 com.sap.inst.jload.Jload dbImport
INFO: SP_RESULTS loaded (0 rows)
12.09.08 13:44:04 com.sap.inst.jload.Jload dbImport
INFO: trying to create table SP_STORAGE
12.09.08 13:44:05 com.sap.inst.jload.Jload dbImport
INFO: table SP_STORAGE created
12.09.08 13:44:06 com.sap.inst.jload.Jload dbImport
INFO: SP_STORAGE loaded (2 rows)
12.09.08 13:44:06 com.sap.inst.jload.Jload dbImport
INFO: trying to create table TC_WDRR_FGUID
12.09.08 13:44:07 com.sap.inst.jload.Jload dbImport
INFO: table TC_WDRR_FGUID created
12.09.08 13:44:07 com.sap.inst.jload.Jload dbImport
INFO: TC_WDRR_FGUID loaded (0 rows)
12.09.08 13:44:07 com.sap.inst.jload.Jload dbImport
INFO: trying to create table TC_WDRR_LAYERS
12.09.08 13:44:08 com.sap.inst.jload.Jload dbImport
INFO: table TC_WDRR_LAYERS created
12.09.08 13:44:08 com.sap.inst.jload.Jload dbImport
INFO: TC_WDRR_LAYERS loaded (2 rows)
12.09.08 13:44:08 com.sap.inst.jload.Jload dbImport
INFO: trying to create table TC_WDRR_MRO_FILES
12.09.08 13:44:09 com.sap.inst.jload.Jload dbImport
INFO: table TC_WDRR_MRO_FILES created
PLEASE HELP ASAP!!!!!!
Regards,
Sohal....

Hi Ashok,
Thanks for prompt response
Yes Oracle is up....it bounced the Db once before performing Post Load activities...step
now, it resumed the installation and currently updating the DB statistics.
please chk the logs below:
tail -200f sapinst.log:
INFO 2008-09-12 14:12:05.250
Execution of the command "/oracle/RGP/102_64/bin/lsnrctl status LISTENER" finished with return code 0. Output:
LSNRCTL for Solaris: Version 10.2.0.1.0 - Production on 12-SEP-2008 14:12:05
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=RGP.WORLD))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for Solaris: Version 10.2.0.1.0 - Production
Start Date                11-SEP-2008 20:28:39
Uptime                    0 days 17 hr. 43 min. 25 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   /oracle/RGP/102_64/network/admin/listener.ora
Listener Log File         /oracle/RGP/102_64/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=RGP.WORLD)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=RGP)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=FLGPPSAP01)(PORT=1527)))
Services Summary...
Service "RGP" has 1 instance(s).
Instance "RGP", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
INFO 2008-09-12 14:12:13.667
Execute step createOracleStatisticsSynonyms of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_ORA|ind|ind|ind|ind|0|0
INFO 2008-09-12 14:12:14.023
Account orargp already exists.
INFO 2008-09-12 14:12:14.033
Account 0 already exists.
INFO 2008-09-12 14:12:14.049
Account dba already exists.
INFO 2008-09-12 14:12:14.058
Account 104 already exists.
INFO 2008-09-12 14:12:14.078
Account 0 already exists.
INFO 2008-09-12 14:12:14.096
Account 105 already exists.
INFO 2008-09-12 14:12:15.836
Creating file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/brconnect.log.
INFO 2008-09-12 14:12:15.972
Output of /usr/sap/RGP/SYS/exe/run/brconnect -u / -c -f crsyn -o SAPSR3 is written to the logfile brconnect.log.
INFO 2008-09-12 14:12:18.817
Execution of the command "/usr/sap/RGP/SYS/exe/run/brconnect -u / -c -f crsyn -o SAPSR3" finished with return code 0. Output:
BR0801I BRCONNECT 7.00 (32)
BR0280I BRCONNECT time stamp: 2008-09-12 14.12.17
BR0833I Creating public synonyms for database log owner SAPSR3...
BR0925I Public synonym SAP_SDBAH created successfully for table SAPSR3.SDBAH
BR0925I Public synonym SAP_SDBAD created successfully for table SAPSR3.SDBAD
BR0925I Public synonym SAP_MLICHECK created successfully for table SAPSR3.MLICHECK
BR0925I Public synonym SAP_SAPLIKEY created successfully for table SAPSR3.SAPLIKEY
BR0925I Public synonym SAP_DBAML created successfully for table SAPSR3.DBAML
BR0925I Public synonym SAP_DBARCL created successfully for table SAPSR3.DBARCL
BR0925I Public synonym SAP_DBAFID created successfully for table SAPSR3.DBAFID
BR0925I Public synonym SAP_DBAEXTL created successfully for table SAPSR3.DBAEXTL
BR0925I Public synonym SAP_DBAREOL created successfully for table SAPSR3.DBAREOL
BR0925I Public synonym SAP_DBABARL created successfully for table SAPSR3.DBABARL
BR0925I Public synonym SAP_DBADFL created successfully for table SAPSR3.DBADFL
BR0925I Public synonym SAP_DBAOPTL created successfully for table SAPSR3.DBAOPTL
BR0925I Public synonym SAP_DBASPAL created successfully for table SAPSR3.DBASPAL
BR0925I Public synonym SAP_DBABD created successfully for table SAPSR3.DBABD
BR0925I Public synonym SAP_DBABL created successfully for table SAPSR3.DBABL
BR0925I Public synonym SAP_DBATL created successfully for table SAPSR3.DBATL
BR0925I Public synonym SAP_DBAOBJL created successfully for table SAPSR3.DBAOBJL
BR0925I Public synonym SAP_DBAPHAL created successfully for table SAPSR3.DBAPHAL
BR0925I Public synonym SAP_DBAGRP created successfully for table SAPSR3.DBAGRP
BR0925I Public synonym SAP_DBAERR created successfully for table SAPSR3.DBAERR
BR0925I Public synonym SAP_DBATRIAL created successfully for table SAPSR3.DBATRIAL
BR0925I Public synonym SAP_SVERS created successfully for table SAPSR3.SVERS
BR0925I Public synonym SAP_TGORA created successfully for table SAPSR3.TGORA
BR0925I Public synonym SAP_IGORA created successfully for table SAPSR3.IGORA
BR0925I Public synonym SAP_TSORA created successfully for table SAPSR3.TSORA
BR0925I Public synonym SAP_TAORA created successfully for table SAPSR3.TAORA
BR0925I Public synonym SAP_IAORA created successfully for table SAPSR3.IAORA
BR0925I Public synonym SAP_DD02L created successfully for table SAPSR3.DD02L
BR0925I Public synonym SAP_DD09L created successfully for table SAPSR3.DD09L
BR0925I Public synonym SAP_DDNTT created successfully for table SAPSR3.DDNTT
BR0925I Public synonym SAP_DBCHK created successfully for table SAPSR3.DBCHK
BR0925I Public synonym SAP_DBDIFF created successfully for table SAPSR3.DBDIFF
BR0925I Public synonym SAP_DBSTATC created successfully for table SAPSR3.DBSTATC
BR0925I Public synonym SAP_DBSTATTORA created successfully for table SAPSR3.DBSTATTORA
BR0925I Public synonym SAP_DBSTATIORA created successfully for table SAPSR3.DBSTATIORA
BR0925I Public synonym SAP_DBSTATHORA created successfully for table SAPSR3.DBSTATHORA
BR0925I Public synonym SAP_DBSTAIHORA created successfully for table SAPSR3.DBSTAIHORA
BR0925I Public synonym SAP_DBCHECKORA created successfully for table SAPSR3.DBCHECKORA
BR0925I Public synonym SAP_DBMSGORA created successfully for table SAPSR3.DBMSGORA
BR0280I BRCONNECT time stamp: 2008-09-12 14.12.18
BR0834I Public synonyms for database log owner SAPSR3 created successfully
BR0280I BRCONNECT time stamp: 2008-09-12 14.12.18
BR0802I BRCONNECT completed successfully
INFO 2008-09-12 14:12:23.841
Execute step setOraclePasswords of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_ORA|ind|ind|ind|ind|0|0
INFO 2008-09-12 14:12:25.190
Account orargp already exists.
INFO 2008-09-12 14:12:25.194
Account dba already exists.
INFO 2008-09-12 14:12:25.198
Account orargp already exists.
INFO 2008-09-12 14:12:25.202
Account dba already exists.
INFO 2008-09-12 14:12:25.251
Removing file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/ora_query3_tmp0_1.sql.
INFO 2008-09-12 14:12:25.260
Creating file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/ora_query3_tmp0_1.sql.
INFO 2008-09-12 14:12:28.279
Account orargp already exists.
INFO 2008-09-12 14:12:28.290
Account 0 already exists.
INFO 2008-09-12 14:12:28.305
Account dba already exists.
INFO 2008-09-12 14:12:28.315
Account 104 already exists.
INFO 2008-09-12 14:12:28.335
Account 0 already exists.
INFO 2008-09-12 14:12:28.353
Account 105 already exists.
INFO 2008-09-12 14:12:30.123
Creating file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/brconnect.log.
INFO 2008-09-12 14:12:30.269
Output of /usr/sap/RGP/SYS/exe/run/brconnect -u / -c -f chpass -o SAPSR3 -p XXXXXX is written to the logfile brconnect.log.
INFO 2008-09-12 14:12:31.006
Execution of the command "/usr/sap/RGP/SYS/exe/run/brconnect -u / -c -f chpass -o SAPSR3 -p XXXXXX" finished with return code 0. Output:
BR0801I BRCONNECT 7.00 (32)
BR0280I BRCONNECT time stamp: 2008-09-12 14.12.30
BR0828I Changing password for database user SAPSR3
BR0280I BRCONNECT time stamp: 2008-09-12 14.12.30
BR0829I Password changed successfully in database for user SAPSR3
BR0830I Password inserted successfully into table OPS$RGPADM.SAPUSER for user SAPSR3
BR0280I BRCONNECT time stamp: 2008-09-12 14.12.30
BR0802I BRCONNECT completed successfully
INFO 2008-09-12 14:12:31.574
Account orargp already exists.
INFO 2008-09-12 14:12:31.578
Account dba already exists.
INFO 2008-09-12 14:12:31.583
Account orargp already exists.
INFO 2008-09-12 14:12:31.587
Account dba already exists.
INFO 2008-09-12 14:12:31.641
Removing file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/ora_query3_tmp1_1.sql.
INFO 2008-09-12 14:12:31.649
Creating file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/ora_query3_tmp1_1.sql.
INFO 2008-09-12 14:12:33.918
Account orargp already exists.
INFO 2008-09-12 14:12:33.928
Account 0 already exists.
INFO 2008-09-12 14:12:33.944
Account dba already exists.
INFO 2008-09-12 14:12:33.953
Account 104 already exists.
INFO 2008-09-12 14:12:33.973
Account 0 already exists.
INFO 2008-09-12 14:12:33.991

Multiple cPCI Graphics cards - System Hangs during Boot

We have 2 Kontron dual output CP332 cPCI graphics cards to install into a NI PXI rack in order to give us 4 graphics outputs.
When one card is installed it acts as the Primary graphics card and it is required to disable to NI on-board graphics card in order for this to boot and function correctley.
If a 2nd Kontron CP322 card is added the system will hang during WinXP boot, as it switches from VGA to SVGA mode.
Disabling the 2nd card via device manager allows the system to boot.
Re-enabling the 2nd card once booted, then configuring with the ATI driver application allows the 4 graphics output to work as expected.
If the system is re-powered it will once again hang during WinXp booting.
Is there anything that can be configured on the NI Embedded PC (BIOS) to prevent this ?
Is there anything in windows that can be set to prevent this ?
Can we control the windows device manager from labview in order to enable/disable the 2nd card after power-on and before shutdown.
many thanks

Hi Scott,
I have some more information for you regarding your issue. We have tested the Kontron CP332 with the PXI-8196.
However when we tested the setup, we had 3 monitors working, the on-board graphics and the dual output from the card.
Until we get the on-board graphics working with a single CP332 I don't think we will get bot CP332's working.
So these are the steps to get on-board graphics working with a single Kontron card the steps come from talking to our PXI Product Support Engineer:
"The first thing you need to make sure is that you are using the
driver for Windows XP, and not the one for Windows 2000. Here's a link
to the driver download page:
http://us.kontron.com/index.php?searchword=cp+332&id=363
Notice that the first two driver downloads look just the same, but if
you hover over them and look at the url, you'll notice that the first
one is for Windows 2000 (w2k), and the second one is for Windows XP
(wxp). So, just make sure you are using the second one. The PSE did
mention that she was initially using the Win 2k driver, and was having
some issues with it hanging and all. Here's the information she sent me
about how she was able to get things working:
"Here is the info. My controller has BIOS version 1.3 but have him try this first before updating the BIOS.
The Kontron Board is the CP 332. I was able to get all three monitors working with the PXI-8196.
Configuration steps:
1) Insert both the controller and the kontron board in the chassis.
Note: When the computer is starting it will give you the Windows boot
up screen on the DVI 1 on the Kontron board and then give you the login
screen on the monitor connected to the 8196 so make sure you still have
a monitor connected to the controller.
2) Cancel the NI installation wizard if it comes up.
3)
Unzip the drivers and run the setup.exe file. Make sure you install
both the ATI display driver and the ATI Control Panel. (Check the zip
name to make sure you have the xp version of the driver)
4) After
restart go to the Display Properties and under the Settings tab you
should have monitors 1 and 2 on Mobility Radeon 9000 (Kontron CP-332)."
If you don't have BIOS version 1.20 or higher, please upgrade to BIOS version 1.30, if you need to upgrade the BIOS please make sure you fully understand the readme file. Then follow the steps above to enable triple output on the graphics cards.
When you have this working please try adding the second Kontron card.
Regards
JamesC
NIUK and Ireland

The user name or password is incorrect in the CRM system checks during installation

Hi everyone
I'm installing CRM 2013 on 2 servers (server 2012) - CRM Full server + SQL Server 2012.
I created 2 service accounts for this - CRMSVC + CRMSANDBOX (one for sandbox and another one for all the rest).
I'm getting the following error in the system checks during setup:
I've verified a billion times that the service accounts and passwords are valid - I even tried using different service accounts - same problem. As for now I also added the service accounts to the local admins groups just to be sure that it's not some permissions
issue (I also added them to the 'log on as service' & performance logs groups).
If i try to use NETWORK SERVICES instead of a service account - the installation goes through flawlessly - no issues at all.
I'm also gonna say that i tried another installation on a fresh server - SAME ISSUE.
So for now my ideas are either it's a GPO somehow blocking the service accounts - or some kind of other security issue.
I also found out that the security event log shows these two errors when these show up in the system checks:
Inside i found 'NULL SID' entry - it does not recognize the service accounts account and 0xC0000064 in the Sub
Status Codes
It's not a typo issue so don't bother - if i write a wrong password in purpose - it actually says that the password i typed for domain\service account is incorrect - here it seems that the service account is not being recognized.
Any ideas anyone?
Thanks
Please vote if you find my post helpful - Thanks

Not sure you understood my point.
The installation process necessarily runs under the account of the installing user. The installation will query AD to identify information about the service accounts, and will add them to the relevant CRM AD groups. It is possible that the installing user
account does not have sufficient privileges on the AD objects for the service accounts to be able to identify them, and to add them to groups. This scenario is consistent with the errors that you get, and also with being able to install CRM to run under NetworkServices
(which doesn't have its own AD object)
Microsoft CRM MVP - http://mscrmuk.blogspot.com/ http://www.excitation.co.uk
Hi David
I understand this, but as far as i know running it under NETWORK SERVICES will add the machine names to the OU security groups - hence the user installing still needs to have delegated permissions on that OU. Anyway as mentioned above - ignoring the checks
and running the installation solved this and also added the accounts to the security groups - so this whole mess looks like some bug to me - not sure i will ever find out what it was :)
Please vote if you find my post helpful - Thanks

ITunes won't install on my system: error during installation of assembly

Hey everyone. I've been living a nightmare for the past month. I tried to upgrade my system to Windows7 x64 and had major CPU problems. After nearly a month of trying to fix it, I decided to go back to Vista x64. That solved my CPU problem, but now I can't get iTunes to load!
Here the error message I get during installation:
An error occurred during installation of assembly 'Microsoft.VC80.CRT,publicKeyToken="1fc8b3b9a1e18e3b",type="win32"version="8.0. 50727.762",processArchitecture="x86". Please refer to Help and Support for more information. HRESULT: 0x80070424
Any ideas??

Doublechecking something, paradox. Head into your Windows Update and have a look at your Update History. Have updates also been failing for you? If so, what error code shows up for the failed updates?
(Doubleclick the failed updates to see a small window with more information, including the error codes.)

Solaris 10 11/06 Rev. A hangs during installation

Just received my Solaris 10 DVD package in the mail;
during the boot process to go into the installation process, it hangs no matter what you select in GRUB
this is the screen (when selecting to boot 'Solaris') in which it hangs...
SunOS Release 5.10 Version Generic_118855-33 32-bit
Copyright 1983-2006 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
my hardware;
AMD Athlon 1800+
512 MB of RAM
80 GB HDD
ATI Radeon 9200 AGP

My Computer:
Intel Celeron 2.7GHz
80 GB Hard Drive
512 MB Ram
ATI Radeon 9200 PCI
I'm suspecting that it's the Radeon Graphics card (hope not, using the onboard will cut into system ram, I suspect that is the case for you also?) - but it is listed as working in the HCL last time I checkd.
It displays the copyright message, then the cursor jumps around the screen a bit and it justs there.
What type of computer do you have, and what model (HP, Dell, eMachines, Gateway, etc.)?
I may pull the graphics card out later and turn on the onboard graphics and see what happens then. First I'll try just changing the default display in BIOS and trying to boot the install, though. I'll post back and see if that changes anything.
*Note: Solaris 10 installation DOES boot on my main windows development workstation, which has the same card you have (AGP, instead of PCI like this one, though - but same card) - so I'm skeptical of the cause. Most probably a BIOS/misc. hardware issue. I tried loading the kernel in verbose mode (-v) and there were no errors.

Driver alias changes during installation of Solaris

I have a HP LP1000r Netserver. It's a little 1u box with a hardware pci raid controller that is giving me some grief.
The card is a HP NetRaid-1M. This card is bascially an OEM version of the AMI MegaRaid 475(Express 500). AMI's raid cards were bought out by LSI who doesn't have Solaris drivers for this card.
There is a LSI MegaRaid driver disk for download from Sun but that seem to be just for new MegaRaid cards. Solaris has a AMI MegaRaid driver, "amr". Looking at the driver alias for the latest Solaris 10 x86 release the driver_alias does not contain the pci ids for my card.
The Solaris amr driver seems to be a port of the FreeBSD amr driver (http://blogs.sun.com/roller/page/JoeyGuo?entry=hello_there_welcome_here). The FreeBSD driver lists support for "AMI MegaRAID Express 500 (Series 475)".
So is there any way for me to tell the Solaris installation that my card should use the amr driver? I need to install to hard drives connected to this card.
Would support for this card have been stripped when it was ported from FreeBSD?
Thanks,
-Matt H.

I've installed FreeBSD on the system to verify that the HP NetRAID-1M is supported by the original amr driver, and it is.
At the grub menu I've tried to modify the kernel parameters when launching the install to:
kernel /boot/multiboot kernel/unix -B install_media=cdrom,"target-driver-for-pci103c,60e7"=amr
I've also tried sd instead of amr. The quotes are because of the comma in the key name. I'm kinda guessing on the quote usage based on the info at the end of http://docs.sun.com/app/docs/doc/819-2379/6n4m1vldu?a=view.
I came across http://forum.sun.com/jive/thread.jspa?forumID=291&threadID=89269 which sounds like it might work for me but building an install server just to modify a driver alias for a single machine is just a little much.
If there is no way to just make Solaris see the card correctly during install, is there some way to make a driver disk that just adds extra alias and what ever else is need to make the existing driver work?

-- Oracle Unbreakable Linux hangs during installation --

Hi
I am trying to install the new Oracle Unbreakable Linux on a 2 CPU Intel Pentium 4 64 bits server. During the first CD installation it hangs just after you select if you want to install using the graphical mode or the character base mode (it hangs in both modes).The point where it fails is
mounting /tmp as ramfs....... done
running install...
running /sbin/loader
Has anybody experience the same behavior or do you have any suggestions?
This error does not happen when I try to install either SUSE 9 or 10 nor Red Hat 3 or 4,
so I do not think is the hardware.
Any help will be appreciated.

Ok. New update. I had rejiggered my desktop hard-drives and the DVD drive and in the process had not set the proper Master / Slave settings on the DVD drive. After I fixed that, it did start installing.
I selected the Server configuration and later selected the "Install everything" option. It failed after about 30 minutes while installing the snmp package. It said that it was a serious error due to media error or no disk space. Both of which seemed improbable because the media test resulted fine and I had 160 GB of Hard disk space !. I had to abandon ( well no choice actually ) and restart. This time I chose the Workstation configuration and just added the scientific packages. This time it installed ok, but, new problem.
I do not see ANY applications at all in the Applications drop down menu. Not even as root.
Hmmm. I would hate to start digging around in gnome. It is a distraction from what I really intend to do. To start developing applications on 10g on Linux ! Damn.
Any advise ?

"No Disk Found" error during installation of Solaris 10[11/06] on HP 6710b

Hallo Guys,
I am trying to install Solaris 10 on my HP 6710b lap top but it fails with "No Disk Found" error.
I used "Solaris 10 support tool" to check my system and it reports that my system is supported.
You can find the report bellow. I am sure that my disk is OK and I am also using "CD-ROM" option in BIOS for installing solaris from my Solaris DVD.
I have also updated the drivers using "CPQary3-1.71-solaris10-i386".
Please help me.
Thanks,
Qumar
Report of Sun Device Detection Tool
The table below displays the devices detected in your system along with the corresponding driver status in Solaris 10 8/07 on x86/x64 platforms.
All detected devices are supported by Solaris OS.
Solaris Driver 32-bit
Solaris Driver 64-bit
Device Type
Vendor Name
Device Name
Solaris Bundled Driver: pcic
Solaris Bundled Driver: pcic
Bridge
Ricoh Co Ltd
RL5c476 II
Solaris Bundled Driver: hci1394
Solaris Bundled Driver: hci1394
Firewire
Ricoh Co Ltd
R5C832 IEEE 1394 Controller
Third-Party Driver: bcme (Note-1)
Third-Party Driver: bcme (Note-1)
Network
Broadcom Corporation
NetLink BCM5787M Gigabit Ethernet PCI Express
Solaris Bundled Driver: ahci
Solaris Bundled Driver: ahci
Storage
Intel Corporation
82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #1
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #2
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #3
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Contoller #4
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #5
Solaris Bundled Driver: ehci
Solaris Bundled Driver: ehci
USB
Intel Corporation
82801H (ICH8 Family) USB2 EHCI Controller #1
Solaris Bundled Driver: ehci
Solaris Bundled Driver: ehci
USB
Intel Corporation
82801H (ICH8 Family) USB2 EHCI Controller #2
[W] Solaris Bundled Driver: audiohd
[W] Solaris Bundled Driver: audiohd
Multimedia
Intel Corporation
82801H (ICH8 Family) HD Audio Controller
Solaris Bundled Driver: pci-ide
Solaris Bundled Driver: pci-ide
Storage
Intel Corporation
82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller
[W] Solaris Bundled Driver: vgatext
[W] Solaris Bundled Driver: vgatext
Video
Intel Corporation
Mobile GM965/GL960 Integrated Graphics Controller
Open Solaris Driver: wpi (Note-2)
Open Solaris Driver: wpi (Note-2)
Network
Intel Corporation
PRO/Wireless 3945ABG Network Connection
[W]: (1) No Dedicated Xorg Driver supporting Graphic Interface
(2) Driver support for indicated device not guaranteed
Note-1: http://www.broadcom.com/support/ethernet_nic/.
Note-2: http://opensolaris.org/os/community/laptop/wireless/wpi.

Hallo Guys,
I am trying to install Solaris 10 on my HP 6710b lap top but it fails with "No Disk Found" error.
I used "Solaris 10 support tool" to check my system and it reports that my system is supported.
You can find the report bellow. I am sure that my disk is OK and I am also using "CD-ROM" option in BIOS for installing solaris from my Solaris DVD.
I have also updated the drivers using "CPQary3-1.71-solaris10-i386".
Please help me.
Thanks,
Qumar
Report of Sun Device Detection Tool
The table below displays the devices detected in your system along with the corresponding driver status in Solaris 10 8/07 on x86/x64 platforms.
All detected devices are supported by Solaris OS.
Solaris Driver 32-bit
Solaris Driver 64-bit
Device Type
Vendor Name
Device Name
Solaris Bundled Driver: pcic
Solaris Bundled Driver: pcic
Bridge
Ricoh Co Ltd
RL5c476 II
Solaris Bundled Driver: hci1394
Solaris Bundled Driver: hci1394
Firewire
Ricoh Co Ltd
R5C832 IEEE 1394 Controller
Third-Party Driver: bcme (Note-1)
Third-Party Driver: bcme (Note-1)
Network
Broadcom Corporation
NetLink BCM5787M Gigabit Ethernet PCI Express
Solaris Bundled Driver: ahci
Solaris Bundled Driver: ahci
Storage
Intel Corporation
82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #1
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #2
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #3
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Contoller #4
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #5
Solaris Bundled Driver: ehci
Solaris Bundled Driver: ehci
USB
Intel Corporation
82801H (ICH8 Family) USB2 EHCI Controller #1
Solaris Bundled Driver: ehci
Solaris Bundled Driver: ehci
USB
Intel Corporation
82801H (ICH8 Family) USB2 EHCI Controller #2
[W] Solaris Bundled Driver: audiohd
[W] Solaris Bundled Driver: audiohd
Multimedia
Intel Corporation
82801H (ICH8 Family) HD Audio Controller
Solaris Bundled Driver: pci-ide
Solaris Bundled Driver: pci-ide
Storage
Intel Corporation
82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller
[W] Solaris Bundled Driver: vgatext
[W] Solaris Bundled Driver: vgatext
Video
Intel Corporation
Mobile GM965/GL960 Integrated Graphics Controller
Open Solaris Driver: wpi (Note-2)
Open Solaris Driver: wpi (Note-2)
Network
Intel Corporation
PRO/Wireless 3945ABG Network Connection
[W]: (1) No Dedicated Xorg Driver supporting Graphic Interface
(2) Driver support for indicated device not guaranteed
Note-1: http://www.broadcom.com/support/ethernet_nic/.
Note-2: http://opensolaris.org/os/community/laptop/wireless/wpi.

System restarts during installation of Mac OS 10.3

To start off, this is my system:
1.33 GHz PowerBook G4
2GB RAM
80GB HD
About six months ago my PowerBook began freezing when I would have it running solely on battery power. It would give me the "You must restart your system" message. At first I thought it was the battery, so instead of buying a new battery, I just used my machine on AC power. That is, until two weeks ago. I began seriously looking into buying a new battery, so before I did that I wanted to make sure it was indeed my battery. Turns out it wasn't. It was a kernal panic. Knowing nothing about kernal panics, I did some research and went through all of the tests to find the problem. I ran the hardware test that came with my restore dics. Everything checked out fine, even the RAM (which I thought might be the problem since it was third party after-market RAM). Finally I tried freeing up considerable hard drive space. PROBLEM SOLVED! I could run off of battery power. But I did read that the last resort is alway a clean install of Mac OS X. Because I wanted to make **** sure that this problem did reoccur, I decided to do a clean install using the restore discs that came with my system. Everything started just fine. It checked the installation disc and began installing 10.3. That is, for about 5 minutes. At that time the system appeare to restart. it showed the grey start up screen. But it stayed at that screen... all night long. After doing a hard retart, I tried installing it again. This time is gave me a kernal panic (system froze, text appeared down the screen detailing stuff I couldn't understand). So for two weeks I've been battling this installation. Sometimes it restarts and freezes, sometimes I get a kernal panic. I'm at a loss here. I have no idea what the problem is. And the worst part is, I don't know how to get the restore disc out.

adam:
Welcome to Apple Discussions.
Here are a couple of articles on kernel panics that might help.
1. What's a "kernel panic"? (Mac OS X)
2. Resolving Kernel Panics
It is never a good idea to install before resolving issues with the computer. The first order of business is to determine what is causing the kernel panics and see if it can be resolved, then to the installation.
Good luck.
cornelius

TP tool hangs during installation of PI_BASIS Patch 6

Hello everyone,
I'm facing the problem that I can't get the PI_BASIS Patch (SAPKIPYJ76) installed (on MySAP ERP 2005 on SLES 9). It still does not go on in the phase 'IMPORT_PROPER'. In SM50 the process is in status "On Hold", reason "RFC". There is no error in the regarding logs, and the CPU utilization is near to 0% when no other user is logged in. I have searched through Sapnet and this forum, but couldn't get a hint to solve the problem.
I would be very glad when anybody could help me.
Regards,
Christian

Hi Mike (and everyone else),
i could reproduce the error. When the installation hangs in phase DDIC_ACTIVATION, I can cancel the following work process in SM66:
Work process no.                         6
           Type                          BTC
           Process ID                    8087
           Status                        stopped
           Reason for waiting            CPIC
           Restart                       Yes
           Terminations                  1
Waiting for semaphore
When i now cancel the BGD process in SM50, too, the installation will continue normally.
Have you any idea what the reason is?
Best regards,
Christian

Occasionally system hangs during eject of DVD-drive

I have an irritating problem where I cannot get rid off (yet).
When I am burning cd on nero (latest version) the system starts to hang when the DVD-drive is ejecting the CD -> I have to restart the comp.
Same when I use DVD Decrypter, when I create an ISO file on the hard drive from DVD. It starts to hang when he ejects the DVD.
I started to play around with the automatic eject settings on the drive itself and in the programs and try to set it to "do not eject", but it does't work.
Any hints/ideas?
.

Thanks for the input.
I did not do so much until now...(time)
But what I did is send an email to Nero tech support with all the information included from all there Info utilities, which should help answering some support questions. I can tell you that the support is probably just as "good" as MSI's support. It took them 4 days to send a non helpfull answer... and I had to remind them about the request as well.
I now have latest version of Nero (6.3.1.15) and the drivers from Mega 180 cd.
I assumed that the drivers from my Mega 180 cd were the same from the web (2004-2-17) and that the less helpfull drivers -mentioned in the link by you Normunds- were shipped together with bios 3.0. (I have standard 3.30). But maybe that isn't so...
Anyway Mishima, you have the drivers from the web right (ITB)? And you have let's say half my problem..hmmm
Probably I will try out the following, and if the first of them doesn't help I take the next point and so on:
* Install NEC 2500 latest firmware 1.07
* Install the drivers from the web -ITB- (2004-2-17)
* Install the drivers nVidia nForce 4.24 WHQL
Does anyone have experience with nVidia nForce 4.24 WHQL drivers ??
(http://www.nvidia.com/object/nforce_udp_winxp_4.24)
.

Ovi Suite 2.2.1.23 hangs during installation

Hi there - looking through the forums, this looks like a FAQ - there are several proposed solutions and I think I've tried them all but the same thing still happens: the installer hangs with the bar about a third of the way across.
Tried on both XP and Vista (though I've not tried ALL the proposed solutions on Vista). I *think* the bar went all the way across while I was watching on Vista before proceeding again and stopping about a third of the way.
This is a brand new install (bought a N900 today) and my first experience of Nokia. Not massively impressed so far!
I'm a developer - if anyone from Nokia wants to get in touch I'm happy to help with the investigation...
Clues appreciated!

Sorry, just a quick cut-and-paste on my way out with logs from yesterday. Binary wasn't running twice.
XP:
MSI (s) (58:74) [00:06:10:234]: Executing op: RegOpenKey(Root=-2147483646,Key=SOFTWARE\Nokia\Connectivity Cable,,BinaryType=0)
MSI (s) (58:74) [00:06:10:234]: Executing op: RegCreateKey()
MSI (s) (58:74) [00:06:10:250]: Executing op: RegOpenKey(Root=-2147483646,Key=SOFTWARE\Nokia\ModemOptions,,BinaryType=0)
MSI (s) (58:74) [00:06:10:250]: Executing op: RegCreateKey()
MSI (s) (58:74) [00:06:10:250]: Executing op: ActionStart(Name=CA_USBDriverInstallDrivers_RollBack,Description=Installing [ProductName_Loc],)
MSI (s) (58:74) [00:06:10:250]: Executing op: CustomActionSchedule(Action=CA_USBDriverInstallDrivers_RollBack,ActionType=1378,Source=C:\Program Files\Nokia\Connectivity Cable Driver\,Target="C:\Program Files\Nokia\Connectivity Cable Driver\setupextcmb.exe" uninstall "C:\Program Files\Nokia\Connectivity Cable Driver\",)
MSI (s) (58:74) [00:06:10:250]: Executing op: ActionStart(Name=CA_USBDriverInstallDrivers,Description=Installing [ProductName_Loc],)
MSI (s) (58:74) [00:06:10:250]: Executing op: CustomActionSchedule(Action=CA_USBDriverInstallDrivers,ActionType=1058,Source=C:\Program Files\Nokia\Connectivity Cable Driver\,Target="C:\Program Files\Nokia\Connectivity Cable Driver\setupextcmb.exe" install "C:\Program Files\Nokia\Connectivity Cable Driver\",)
(I don't like the look of the "Rollback"...)
Couldn't find the logs immediately on Vista and need to run - should have time to take another peek this evening...

System hang during installation of Solaris 10

Similar Messages

Maybe you are looking for