System Hang up problem in CS-5 (5.0.0 and 5.02 both ver.)

System Hang up problem in CS-5 (5.0.0 and 5.02 both ver.) I have HP machine with i 7 windows 7 and 8GB RAM. Here I'm pasting information from windows application errors:
09/24/2010 1:43PM Description A problem caused this program to stop interacting with Windows. Faulting Application Path:     C:\Program Files\Adobe\Adobe Premiere Pro CS5\Adobe Premiere Pro.exe  Problem signature Problem Event Name:     AppHangB1 Application Name:     Adobe Premiere Pro.exe Application Version:     5.0.2.0 Application Timestamp:     4c731297 Hang Signature:     db9d Hang Type:     0 OS Version:     6.1.7600.2.0.0.768.3 Locale ID:     1033 Additional Hang Signature 1:     db9d73861cc870992719a1805a937a6a Additional Hang Signature 2:     54f8 Additional Hang Signature 3:     54f896ba0ceb58b7b8c95873e69e4a38 Additional Hang Signature 4:     db9d Additional Hang Signature 5:     db9d73861cc870992719a1805a937a6a Additional Hang Signature 6:     54f8 Additional Hang Signature 7:     54f896ba0ceb58b7b8c95873e69e4a38  Files that help describe the problem AppCompat.txt Adobe Premiere Pro.exe.xml WERInternalMetadata.xml memory.hdmp minidump.mdmp  View a temporary copy of these files Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Hi,
if you post message, it would be great if you could include more information on the errors you are encountering. "startsap does not work" is not useful to give advises. You also may have get a quicker answer if you split up your long messages into smaller ones. In the middle of the text I found a simple question:
How will I create the db2support file? Can you give me the command for this?
Just use the db2support tool, which is described in detail in the DB2 documentation.
I know that multiple customers has managed to setup SAP on DB2 using HACMP. In addition some customers use the new Tivoli System Automation for Multiplatforms (SAMP).
Oh, I currently see that your message is from last year. I suppose you have solved the problems already.
Regards, Jens

Similar Messages

  • Random system hang-ups with Kernel 3.2.1-1 and catalyst 11.12

    Hello,
    i have a very strange problem for the last month or so (i'm afraid i cannot say, when it exactly happened the first time or if it was after a upgrade): My system just randomly crashes. I haven't yet found out when it exactly crashes and how to reproduce it. But it happens almost every 2-3 days.
    When the system hangs up, the last second of sound repeat over and over again. I can't move my mouse anymore as well as typing has no effect. I cannot change to another terminal. I cannot ssh into the laptop nor can i ping it.
    In /var/log/messages.log, there is nothing usefull.. It just ends with the old kernel messages and then the new ones, when the system restarts. No error or so.
    System runs on a Thinkpad X121e with AMD E-350 CPU. I have installed catalyst 11.12 with xorg-server 1.11.3. I will now compile catalyst 12.1 and see if it happens again.
    Does anyone have a clue why the system crashes? Has it anything to do with catalyst?
    Best regards,
    pyro

    isofluran wrote:Again, as I metioned before, the problem is likely not a hardware one but it is actually related to the kernel update (2.6.19)  or to an update which was performed at the same time.
    Can anyone give a proposal for a step by step procedure to isolate the problem?
    As I don't believe these crashes are related to anything but the kernel, one way of debugging your issues could be:
    * boot Knoppix
    * zcat /proc/config.gz | some non-volatile media
    * boot arch
    * get the current ABS
    * replace config in kernels/kernel26 with the one from Knoppix
    * makepkg
    * install and test
    When that kernel runs, try to diff the two configs and see what's changed in arch. Also comparing both kernel versions if no significant changes exist might hint on the kernel being the problem.

  • Hibernation does not work - System hangs

    Hi, I have T41 laptop with Windows XP. When I tried Hiberation option, system hangs ( message - hibernating......) and does't hibernate. Can you help me with this..
    thanks
    -G
    Solved!
    Go to Solution.

    Right,
    Based on the info you supplied, there's one glaring issue that prevents you from using the hibernate feature successfully - the low disk space. Hibernation requires a minimum of 3GB (mostly 3.5GB as a minimum depending on what you're running - processes, etc).
    Alas, one of the only ways to fix that is to upgrade to a larger capacity hard drive or remove some software to make space.

  • System Hangs on X-kill, reboot, or shutdown [an fglrx problem].

    I'm pretty sure this is linked with my new monitor somehow. I got a new monitor, its hooked up with the DVI cable. Whenever I try to:
    exit openbox
    ctrl-alt-backspace to kill x
    restart (shutdown -r now)
    or shutdown (shutdown - now)
    my system hangs. My screen shuts off, and starts blinking the power button, and its not responding.
    Last edited by heleos (2007-06-16 18:03:04)

    heleos wrote:
    I'm pretty sure this is linked with my new monitor somehow. I got a new monitor, its hooked up with the DVI cable. Whenever I try to:
    exit openbox
    ctrl-alt-backspace to kill x
    restart (shutdown -r now)
    or shutdown (shutdown - now)
    my system hangs. My screen shuts off, and starts blinking the power button, and its not responding.
    I've no idea whether it's possible for a new monitor to somehow cause this... are you running ATI or nVidia drivers? Is direct rendering working, do you know?
    Try doing
    $ sudo chown -r yourNonRootUser /path/to/yourNonRootUsersHome
    and seeing whether that remedies the problem with exiting openbox.
    Also, look in /var/log/ for your Xorg.#.log files (I forget whether they're in a subdirectory in there... maybe under /var/log/x11/  ). See whether the most recent log file has any warnings or errors (EE or WW in brackets) that may indicate the source of the problem.

  • Are FF4.0.12 and Adobe win,2,159,1 compatable? Since I updated both 5 days ago, I cannot use Facebook or play games. Adobe says it is a FF4 problem so I downloaded 3.6.17 but no help. System hangs.

    XP, 128 bit,ff3.6.17 now but no help.
    Since I updated both, in Facebook my system hangs repeatedly
    Only hard reboot and open new session will let me back on. I have been talking to Adobe support for 3 days and got the advice to put FF3.6.17 back on. It is worse when trying to scroll or trying to play a game. Cursor freezes and system hangs. I need some help pls. Which plugin is best when trying to use facebook and games on FF4.12? DOESN'T ANYONE KNOW OF ANY HELP? Just give me the name of a plugin that FF likes and a Web address. I need to be able to use my browser and would like to play some of my games. PLEASE!!!

    Hey, I really need some help. Doesn't anyone know?
    Just tell me a plugin that will work and not hang FF and give me a website. PLEASE.

  • IMac G5 system hang - 2 bad 1GB memory modules?

    I am experiencing intermittent system hangs, requiring power off / on to recover. Applications run fine for hours, then everything freezes; a few seconds later the fans spool up full bore. There seems to be no logic to the failure. It happens on many different applications, including Disk Utility. No new software has been added recently (other than Apple software updates). This has been occuring for several weeks.
    I repair permissions & run disk verify. When disk utility runs completely without hanging (on verify), everything is ok.
    Applecare had me trash the ~/Library/Caches & system caches. No joy. They recommended archive & install beginning with Panther. Reinstall went ok until downloading updates for 10.4.8, then hang (might this suggest a hardware prob?).
    Rebooted in target firewire mode the cloned drive, then zero'ed the G5 HDD and restored from clone (SuperDuper!). Everything appeared ok for several days, then the same system hang reappeared. I should mention that in the course of sudying this one, I discovered Virex 7.5 was sucking the processing life from the G5; used the uninstaller to get rid of it & the iMac is quiet again!
    I have run the Applecare version of Techtools and the Hardware Test Disk, everything passes.
    I could do a clean install of Tiger, then use migration assistant to move data from the clone...if I felt it had a chance to solve it. On the other hand, maybe its a flaky hardware gremlin and I'm wasting my time doing reinstalls, and I should hustle it over to the local Apple store.
    Update - took iMac for service at Apple store where it failed under stress test with my 2 GB of memory but ran for an extended period with Apple memory. In an attempt to isolate which of the two 1 GB modules was bad, removed one module. Identical failure after 24 hrs. Howver, swapping out that failing module with the second module, identical hand. That suggests either both 1 GB modules are bad (unikely), or some other hardware issue is the problem.
    Problem seems to occur most often when starting playing iTunes, or running Disk Utility (repair permissions).
    I suppose the next step is to buy 1 GB of memory from Apple and make it fail again. Any suggestions?

    Thank you for your posts, I appreciate it.
    Skip - I tried a spare keyboard & mouse. Still failed.
    MGW - all software is up to date.
    DaddyPaycheck - I downloaded memtestosx. It fails testing each 1GB memory module separately (in different sockets). I'm running in multiuser mode and when it fails the entire iMac freezes up (just like it always does), requiring power off / power on. Is this normal behavior when the memtestosx test fails?
    I will plan to test in single user mode as the supplied doc states that if the onboard cache is failing it would pass singleuser (cache apparently disabled in singleuser mode) but fail multiuser. Maybe the onboard cache is bad?
    Thanks.

  • Close Front Panel Causes System Hang.

    I have an application where there are several front panels that I would like to have open at once, but where when they stop they would close.  I was using the scripting function fp.close - but as the application has got more complicated this seems to work less and less well.  Basically when i hit close, the system hangs for a few seconds, then the time critical stuff i have tends to timeout and then crash, and everything goes funny for a while. 
    My (uneducated) guess is that when it closes a front panel it drops loads of stuff straight out of memory - in an uncontrolled way. 
    After going for a cup of coffee it usually sorts itself out.  But clearly this isn't a sustainable solution for my application or my kidneys.
    Am I doing something wrong? - Is there something i should do to allow the Vi to finish before i try to close it? Should i be releasing references or somethign to make things better.  I thought about running the close vi sub as a new thread - but not sure if this would actually do anything different.
    Attached - the subroutine that i pass a vi ref to.
    Attachments:
    RunningVis_CloseSubVi.vi ‏17 KB

    There's nothing in the attached VI that would necessarily cause your problem. I would, however, suggest that you feed your reference through the nodes in proper flow control method rather than branching off like you've done.
    When a VI fails to close quickly, I have most often found it's due to open references which aren't explicitly closed. File references, VI references, multiple calls in a loop acquiring the same reference over and over without releasing it, .NET calls not being closed - that kind of thing.
    Richard

  • [SOLVED]System Hang in Arch Linux

    I have tried distributions like ubuntu and fedora in hope for finding a stable system . So I move on to Arch Linux
    But this problem also exist on Arch. While using my Arch Linux (including ubuntu and fedora) my system hangs with a black screen with something written on the whole screen which cannot be pasted here as my system hangs and I have to push power button to restart.
    So I check my errors.log file and found these errors
    Jul  8 22:59:24 localhost kernel: [    1.680013] ata3: softreset failed (device not ready)
    Jul  8 22:59:24 localhost kernel: [    7.298612] SP5100 TCO timer: mmio address 0xfec000f0 already in use
    Jul  8 22:59:31 localhost kdm_greet[792]: Cannot load /usr/share/apps/kdm/faces/.default.face: No such file or directory
    I have a HCL K21 pdc notebook
    Note: In Ubuntu my notebook start with ata1: softreset failed error at boot time
    Most often this error occur while watching videos or listening music with VLC
    Last edited by Manuj19 (2011-07-09 10:13:24)

    ewaller wrote:It might be better to just post the output of lspci -nn  It will tell us a great deal more about the hardware related to the PCI bus, including specific chip set identifiers.
    Thanks for suggestion
    Here is output of lspci -nn
    00:00.0 Host bridge [0600]: ATI Technologies Inc Device [1002:5a31] (rev 01)
    00:01.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a3f]
    00:04.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a36]
    00:05.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a37]
    00:06.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a38]
    00:07.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a39]
    00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380]
    00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387]
    00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388]
    00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389]
    00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a]
    00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b]
    00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386]
    00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 13)
    00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c]
    00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383]
    00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d]
    00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384]
    01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RC410 [Radeon Xpress 200M] [1002:5a62]
    02:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5001 Wireless Network Adapter [168c:001c] (rev 01)
    08:01.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b3)
    08:01.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394 Controller [1180:0552] (rev 08)
    08:01.2 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 17)
    08:01.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 08)
    08:07.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
    Last edited by Manuj19 (2011-07-09 07:20:08)

  • Just updated to Yosemite, can't update or uninstall adobe flash, system hangs

    Just updated to Yosemite, can't update or uninstall adobe flash, system hangs, have to force quit,.
    Is this a problem with the new operating system and how do I fix this?

    If you can't install or update Flash, follow these instructions.

  • System hangs when copying large quantity of files from external HD

    A little background:
    I was having some problems with the original OS (10.4.1), including periodic freezes. I bought the Mac Box Set '09 and installed Snow Leopard (10.6.5), but ran into some problems and in the process had to reformat my internal hard drive. I backed up all of my photos (~16GB), Documents (~1.5GB) and Music (~50GB) on a WD external hard drive (My Passport 750GB).
    *The problem*: After the 10.6.5 install, the computer works great (no random freezing when I click around in Finder), but I am having trouble copying files back to the internal HD from the external. I can copy up to about 1GB at a time without any problems, but any time I try to copy more than that, the system hangs (first the spinning disk cursor, then it totally freezes) and I have to do a hard reset. I have tried copying a number of different folders (pictures and music), and the same holds true: small folders with a few files copy without a hitch, but any time I try to copy a lot of files at once: freeze city. This problem occurs whether I am using Finder to copy the files or iPhoto/iTunes to import them.
    I have verified both disks using the Disk Utility AND restructured/verified them using DiskWarrior. I also had no problem copying all of my files from My Passport to a second external HD using this MacBook, so I assume the Passport is fine. Is this a physical problem with my internal HD? If so, why can't DiskWarrior or DiskUtility catch it? I just noticed that there is an internal HD recall for this model of macbook, although I have never gotten the question mark on startup that would qualify me for a replacement HD from Apple. Maybe it's a problem with Snow Leopard... I would love to know if anyone has had this problem before or has some advice.
    Thanks,
    Sam

    External USB/FW drives 'falling off' or drives spinning down (going to sleep) and I would assume since you have been running 10.4 that the Passport might be older model, perhaps not the latest firmware, maybe not compatible with Macs and with Snow Leopard.
    Obviously you want FW800 but for some, USB worked where FW fails.
    Hard Reset: do you have another hard drive to boot from to run Disk Warrior? is that updated to 4.2 or later? you never want to run DW from CD. Else, boot from OS X 10.6.5; or Single User and run FSCK. HFS+ doesn't take kindly to hard restarts even though a Safe Boot helps a little, that isn't as good as FSCK or one of the other options.
    Disk Warrior Rebuild is more thorough, but if you hold OPTION while clicking on REBUILD it brings up more choices. And you want to scan the full hard drive.
    Going back to Aug/Sept 2009, there were a lot of threads about external hard drive issues. Wish I could point to a good one.

  • Cannot install OS (system hangs) on K7N2GM-L

    I've just put together a (mostly) new system.  The system posts OK, but when I try to install either Slackware or Win2k, the system hangs.  Slackware consistently hangs after recognizing the cd drive, with a message about a kernel bug, while Win2k hangs while loading hardware files, with a message about a registry error (As in a hardware registry, not the windows registry).  At one point, I was able to get slackware further in the install process, and even partitioned the hd, but I kept getting segfaults and then it would crash.
    [Update]:  Slackware actually hangs in one of two places.  Sometimes it hangs right after initializing the Ramdisk, at which poing it gives an eror about being "Unable to handle kernel NULL pointer dereference at virual address"  I get the CD error when FSB spectrum is set to .50, I get the ramdisk error when it is set to 1.00
    Things I've tried:
    I've tested both ram sticks individually.
    I've tried relaxing the memory timings, and changing the ram voltage.
    I've tried disabling external cache.
    Other info:
    System temperature: 30 degrees celsius
    CPU temp: 50 degrees celsius
    I had to manually tweak the FSB to 166 (was being registered at 100) and set the FSB/DDR ratio to 1:1 (otherwise my PC2700 showed a 100mhz clock)
    Voltages appear to be within tolerance.
    Can anyone suggest what might be wrong?  My power supply is rather cheap, but again, voltages look OK in the bios, and would that create such consistent problems?  Is it my RAM?  Or do I just have a faulty motherboard or CPU?
    I've been at this for hours and I'm going nuts.  Please help!

    qui3ote it's so hard to say just exactly what your rig is going to take to run properly...some ppl spend hours trying different component configurations trying to make them work together only to find out that they have 1 or even 2 components in the "mix" failing at the same time thus leaving them to scratch their heads in disbelievement...I've been there myself...your best bet is to do as the "pro" builders do...
    Homework, homework, homework...many of us now look around the net for others who have already built systems around a certain motherboard not being the first pioneers to venture into the unknown...saving ourselves countless hours because we've taken the time to talk to the experienced out there as to what will and will not work...
    Some of us who do build a lot of systems for other folx out there take the time to buy different brands of memory, PSU's, CPU's, MB's, etc...and play with different configs in order to find "what works" and then post results in different forums in order to let others know what they've tried and not tried...this usually takes a bit of capital in order to buy what's known as "troubleshooting parts" and can get quite expensive...
    To the occasional home builder: The days of buying and building with no problems is long past...with todays high speed systems, a lot of these home builders only remember the brand names that they used in the past thinking that they can go out and buy a really full featured high end MB, cheap generic or "Value" RAM memory, use the same case (usually 3 to 5 yrs old with a PSU in it that couldn't jump start someone's heart if they were dying, much less start up a power hungry high end gaming rig), as well as other peripherals...
    Then they head on down to the MB mfg's website (if they even have one these days) and (thankfully not in your case) begin to trash and bash the company about how they have a crappy product, blah, blah, blah...
    See where I'm going with this? In any case, as long winded as I've been here, you must now rise above the "occasional home builder" status and approach building with a new outlook as to "how to" and do that homework if you don't want to end up in this boat each and everytime...technology advances and it's up to us humans to advance our thought processes with it...
    I wish you luck in your build here...my biggest advice I can give you atm is to go read the sticky posts at the top of the forum for some excellent tips on Memory, troubleshooting, etc, in order to gain some insight into how to do what you're doing...also, as Raven here points out, that PSU is way out of it's league in being able to supply the power needed for the build you're doing...take a step up into the world of high speed computing and lay down some cash for some higher end components that will leave you tearing out less of your hair and give you some peace of mind...
    Apacer, OCZ, Corsair, Infineon, and, of course, Mushkin are all decent memory lines that have been known to work with these MB's...DO NOT buy cheap "Value" RAM memory for your board, it's likely to only give you more headaches...Mid to high end memory will cost you considerably more money but will save you countless hours of time trying to troubleshoot which to me is more valuable these days...a PSU with AT LEAST the amperage specs that Raven lists in his post, +3.3v-28, +5v-35A, +12V-18A, or even better is in most cases a requirement these days...and yes you're going to spend 60 to 100 dollars US or more to get one that gives you that spec...sales are a good thing to watch for all of this...
    Sorry to go on for so long but I just wanted to give you some insight into the "new age" of computer building! Hope I've enlightened some things for you...if not sorry I rambled on so much *chuckles*
    Good luck and let us know if you need any more help!

  • Win7 black-screen-hanging-cursor problem on brand new rMBP

    I am sorry but a face a problem similar to (surprisingly) many in this thread.
    I have a brand new rMBP 15'' with bootcamp Win7 installed (90GB partition). Installation went painless ONLY with a fresh Yosemite 10.10.3 installation, otherwise I fell into said black screen-hanging cursor trap already during installation. After installation I could enter Windows and install some software there. Upon re-boot, black-screen-hanging cursor in top left problem.
    Here is what sudo gpt -vv -r show /dev/disk0 says:
    gpt show: /dev/disk0: mediasize=1000555581440; sectorsize=512; blocks=1954210120
    gpt show: /dev/disk0: Suspicious MBR at sector 0
    gpt show: /dev/disk0: Pri GPT at sector 1
    gpt show: /dev/disk0: Sec GPT at sector 1954210119
           start        size  index  contents
               0           1         MBR
               1           1         Pri GPT header
               2          32         Pri GPT table
              34           6        
              40      409600      1  GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
          409640  1772843400      2  GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
      1773253040     1269536      3  GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
      1774522576        1840        
      1774524416   179685376      4  GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
      1954209792         295        
      1954210087          32         Sec GPT table
      1954210119           1         Sec GPT header
    And here for sudo fdisk /dev/disk0:
    Disk: /dev/disk0    geometry: 121643/255/63 [1954210120 sectors]
    Signature: 0xAA55
             Starting       Ending
    #: id  cyl  hd sec -  cyl  hd sec [     start -       size]
    1: EE 1023 254  63 - 1023 254  63 [         1 -     409639] <Unknown ID>
    2: AC 1023 254  63 - 1023 254  63 [    409640 - 1772843400] <Unknown ID>
    3: AB 1023 254  63 - 1023 254  63 [1773253040 -    1269536] Darwin Boot
    *4: 07 1023 254  63 - 1023 254  63 [1774524416 -  179685376] HPFS/QNX/AUX
    Any help greatly appreciated

    If you built a USB using BCA and Windows ISO/DVD, it will show Windows and EFI boot both as options, when Alt Key is held.
    W7 USB has the following structure .
    W8+ USB has the following structure.
    Does the behavior change if you
    a. Resetting the System Management Controller (SMC) on your Mac - Apple Support
    b. How to Reset NVRAM on your Mac - Apple Support

  • Strange system hang using rmi

    Hi, I read for several hours now, but I can't find a hint what problem I'm experiencing. Perhaps someone has an idea?
    I have a small java application (jdk1.3.1_08) which starts a RMIRegistry, binds an object name. It then starts another java application in another jvm using Runtime.exec(...).
    Everything fine until here. The second application starts and works fine.
    BUT: Now I close app2 and start it again from app1. Basically everything works also this time. But there is a delay at startup from app2 which I cannot explain. App2 hangs for 10 secondes up to 70 seconds, between two debug outputs!!!
    Every little hint is appreciated!!
    Torsten.

    I think the hanging of app2 is not depending on what it actually does. But I try to explain some more, you're right:
    App1 is kind of a starter environment, a launch center for several applications. One of these applications is my app2. The reason for using rmi and the second jvm is that I now can use a System.exit(0) in app2 without killing the launch center (app1). When I start app2 standalone from command line without rmi, then it starts without the strange system hang.
    What does app2 do?
    App2 has a starting time of about 30 seconds (standalone) where several things are initialized. In detail, it is a Swing application using the oracle framework JClient for data binding of Swing components and the oracle framework BC4J for mapping to an oracle database. The system hang when started in the second jvm occurs in the startup process, but not at a specific point in the programm. This means: on PC1 it hangs everytime between the same two debug outputs, on PC2 (a bit faster) it hangs later in the code. Thats the reason why I think, there could be a rmi problem.
    What I did not mention yet: The launch center (app1) builds a kind of transfer object which is passed via rmi to app2 in the second jvm.
    Does this help to solve my problem? I really run out of ideas what to do...

  • System hangs while I save or activate Message mapping

    Hi all,
    After performing the required message mapping whenever I save the Message Mapping the system hangs, it does respond but after a very long time say some 20+ minutes.
    But I don't encounter such problems while saving data types , message types , message interfaces etc..
    can any one help me with this?
    Thanks in advance.
    Ajay

    Hi Michal,
    I have a freshly installed PI 7.1
    Im able to run file to file scenarios without mapping.
    Im able to activae DT, MT, SI etc..but i dont receive any response from the system when I save a message mapping.
    It takes ages to go to test tab, executes after a long time but target shows no message...
    can u kindly help me on this?
    has ne one faced sch an error before.. Im using PI 7.1

  • IBM OS ISSUE: SYSTEM HANG WITH JFS2 AND HEAVY LOAD

    제품 : ORACLE SERVER
    작성날짜 : 2004-11-24
    IBM OS ISSUE: SYSTEM HANG WITH JFS2 AND HEAVY LOAD
    ==================================================
    PURPOSE
    이 문서는 IBM AIX5L OS 상에서 Arch Process가 online redo log
    를 release하지 못하고 OS의 kill 명령으로 kill조차 되지 않을 경우
    조치 방법이다.
    Problem Description
    이 문서는 다음 OS 정보와 Oracle version인 경우에 해당한다.
    Oracle Server - Enterprise Edition - Version: 9.2.0.5.0
    Oracle Server - Enterprise Edition - Version: 8.1.7.4.0
    AIX5L Based Systems (64-bit) or (32-bit)
    문제 발생 당시의 증상은 다음과 같다.
    - arch-process doesn't release redolog files
    - arch-process doesn't die after database shutdown
    - arch-process can't be killed
    genclntsh 수행 시 hang 상태이다.
    (sleeping...)28590: kwaitpid(0x2FF22470, -1, 4, 0x00000000, 0x00000000)
    또는 이 문제로 인하여 ORA-600[2103] 에러가 발생하기도 한다.
    이 에러가 발생하는 원인은 IBM AIX5L 64bit, 32bit OS 이슈에 있다.
    IBM OS issue: SYSTEM HANG WITH JFS2 AND HEAVY LOAD.
    Workaround
    none
    Solution Description
    OS AIX5L ML4.0(5.2.0.40)의 bos.up / bos.mp / bos.mp64 fileset level을
    갖는 JFS2 file system을 갖는 경우에 해당한다.
    AIX 5.3 APAR IY59387은 IY58143에 포함되어 있다.
    JFS2 file system에 Heavy I/O activity가 발생하면 database process에
    HANG 문제를 야기시킬 수 있다. 이 때 database process가 kill -9
    명령으로 kill되지 않는다. 데이타베이스를 SHUTDOWN하여도 Process가
    계속 살아 있게 된다.
    Process에게 SIGKILL 함수가 issue되었지만 영향을 주지 않게 된다.
    Process를 제거하는 유일한 방법은 OS를 reboot하는 것이다.
    문제를 예방하는 방법은 IBM APAR-FIX IY59082 를 적용하는 것이다.
    이 APAR는 bos.64bit 5.2.0.42에 포함되어 있다.
    Fix :
    Need to install the IBM APAR-FIX IY59082, this APAR is included on
    bos.64bit 5.2.0.42.
    (주) IBM 엔지니어에게 확인 결과 이 Patch 안에 AIX5L 32bit 용과 64bit
    용이 모두 포함되어 있는 것으로 확인됨.
    Reference Documents
    <Note:285158.1>

    b,
    The install was from my original Dell XP Pro-SP1 'Reinstallation' CD along with the complete MS XP-SP2 download that I burned to another CD. I also had all the latest Dell drivers from their website burned to a CD. Install went as follows:
    - Format HD
    - Install XP Pro SP1
    - Install SP2
    - Install Dell Drivers
    - Obtain any MS patches from their site
    - Install Office
    - Update Office from the MS website
    - Install iTunes
    - Tweak MS settings
    - Install many software programs
    - Make an interim Image of system and store to ExHD
    - Install other software programs (mostly security programs)
    - Make another 'complete' Image to ExHD
    - Restore backup data and music
    After additional testing last night, I determined that it is not iTunes at all (or to blame). I get intermittent hangs/freezes/pauses in other media players (WMP, etc.).
    Seems that something is causing the 'System' process to periodically jump up in CPU %age (though not more than 30-50%). Even this relatively small amount is enough to pause the playback of music or video, hang the mouse movement for a brief moment, or delay a menu opening. All very subtle - you have to be looking for it to notice (except with real-time audio-video, which is quite noticeable whenever this happens).
    I had this problem a year ago, which is why I reimaged then and stayed with SP1 on the advice of Dell and Webroot. I'm stumped as to where to look for the culprit. Every time I go back to the original HD with SP1, everything runs smoothly. Some sort of system call is generating this complete pause....
    I'll be limited in my Internet ability for the next several days, so I may be out of touch until Friday. I'll keep testing and playing with the limited equipment I take along....
    Any thought you or others want to toss out, I'll attempt when possible.
    Thanks!

Maybe you are looking for

  • Photo will not attach to text message

    I have an iPhone 5s and iOS 8.1. Ever since I've had the phone (it's been 3 months), I have not been able to text a photo from the photo app.  I go to the app, then albums, pick a photo, hit the box with the arrow (gives me several options to share:

  • I want a refund for app

    i purchased drivesafe.ly about an hour ago. none of the features work , so i wanted a refund. i went into i tunes. clicked on purchase history. picked report a problem selected drivesafe.ly. and it opens the itunes support page. unclear how to procee

  • To change assignment field (ZUONR) in accounting document when doing PGI

    Hi Gurus, I have one requirement. I will create one sales order with the reference of contract and then i will do the delivery and I will do PostGoodsIssue(PGI).In standard at that time it creates an accounting document in background.At that time I n

  • Format column in Numbers for zip code

    how do I get a leading zero for zip codes??

  • Creating SQLSERVER source module in OWB 10gR2

    I need to import the data from Sqlserver2005. For that I followed the steps: 1. Crated the System DSN. 2. Modified the tnsnames.ora,listner.ora. 3. Add a file like 'inithsodbc.ora' in /hs/admin 4. Listner started at server machine. 5. Created a datab