System hangs up when trying to add a folder in "shared folders"

I'm able to access all my files through a PC when I use the IP of my mac. (After I enable SMB). But instead of giving access to all folders, I would like to share only a couple of them. And whenever I try to add the required folder(s) the MAC hangs up (The menu bar disappears, right click doesn't work.finder doesn't open when clicked). And I have to hard shut down it. Happens everytime I try to add a folder.

Investigate whether the target topic is actually in the project when you look using Windows Explorer. If these broken links are attributable to the folder bug, then right clicking and selecting Restore does fix the problem. I think there is more to the problem in this case.
See www.grainge.org for RoboHelp and Authoring tips
Follow me @petergrainge

Similar Messages

  • Distiller 8 crashing when trying to add watched folder

    *** Reposted from Distiller Server forum ***
    Hi,
    I am running Distiller 8.0 and am  having issues trying to add watched folders. Adding watched folders in  the past has generally been trouble free, and nothing a quick restart  won't solve at worst.
    However, Distiller is now crashing when I try to  add a new watched folder. An empty dialog box shows and then the app  quits. It also does this when going into the watched folder dialog and  cancelling rather than attempting to add a folder.
    PDFs are  still being successfully created, so there isn't a problem on that side.  There is one oddity though - a PDF file has made it onto the watched  folder list. It obviously shouldn't be there, and won't budge when  attempting to remove it.
    Has anyone come across anything like this before.  Or, crucially, does anyone know what might be going wrong?
    Here's a  screenshot (with some blanked out business info) of the dialog that  comes up. This is just after trying to add a watched folder, and just  before it quits/crashes.
    Thanks,
    Kurt

    Please repost in the Acrobat forum. This forum is for a server based version of Distiller, not the version of Distiller that comes with Acrobat.

  • Computer freezes up when trying to add contacts for photo sharing.

    I am using Potoshop Elements 8. I have a short list of contacts for sharing photos from my previous Version 3. However, when I follow the instructions for adding a contact to my list my computer is freezing up forcing me to Cntrl>Alt>Delete.
    Can anyone help?

    can you preview it? -
    Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
    If that works fine and you still have problems boot into safe mode and try again
    LN

  • Labview crashes when trying to add CLIP

    When trying to add component level IP into Labview FPGA the program crashes (non-gracefully) when performing the check syntax.
    Steps to reproduce
    Load Project (Happens with a new unsaved project as well).
    Under FPGA Target (<Any Device>) -> Properties -> Component-Level IP
    Select Create File
    Add any VHDL file (also used the DemoClipAdder.vhd from the High-Throughput Example)
    Choose User-defined IP
    Check Syntax
    As syntax is being checked, the following appears in the log :
       Built simulation executable x.exe
       Fuse Memory Usage: 136412 KB
       Fuse CPU Usage: 468 ms
    Labview hangs for a couple of seconds then crashes
    Alternatively :
    Load Project (Or create a new project)
    Under FPGA Target (<Any Device>) -> New -> VI
    In Block Diagram, add IP Integration Block
    Save VI
    Double click IP Block
    Add Synthesis File -> DemoClipAdder.vhd
    Check Syntax (Completes successfully in this flow)
    Generate
    The following is produced in the log:
       Built simulation executable x.exe
       Fuse Memory Usage: 136668 KB
       Fuse CPU Usage: 421 ms
    Labview Hangs for a couple of seconds then Crashes
    I have tested this multiple times with multiple projects and FPGA devices with the same result every time.

    Hi ThatOtherGuy
    I have followed the steps to try to reproduce your problem but I have not been able to reproduce the error. I used this link to create the file and used notepad to create the file.
    The Check sintax is successful and I do not get any error.
    Have you try to do this in a different computer?
    Which operating system do you have?
    Which version of LabVIEW and drivers are you using?
    Regards
    Esteban R.

  • Error message when trying to add signature. An error has occurred that may be fixed by installing the latest version of the Japanese Language Support package.

    Error message when trying to add signature. An error has occurred that may be fixed by installing the latest version of the Japanese Language Support package.  How can I fix this?
    Thanks
    [email protected]

    What is your operating system?  Reader version?

  • Ora 12154 error when trying to add a database to VS Server Explorer

    Hi Everyone,
    I get the Ora 12154 error when trying to add a database to VS Server Explorer.
    How do I get around this problem.
    The database service is running and I can connect to the database with pl/sql.
    I can also tnsping the database and that is also ok.
    Looks like a problem with the odp.net software.
    I am running the 32 bit Oracle 11g on a Windows7 Home Premium 64 bit PC.
    I am new to this stuff so please help me step by step.
    Thanks.
    Emad

    Hi J. B.
    I have a question related to this. After you told me about the //host:1521/database alias I tried it in a VB 2008 program and it worked and returned data. At least I know that it can be used in a VB program without issues. I just now need to be able to add a connection with the Server Explorer.
    Anyway here is the VB coding I used. I'm new to this and still learning:
    Imports Oracle.DataAccess.Client ' Visual Basic ODP.NET Oracle managed provider
    Public Class Form1
    ' String to connect to the database.
    Dim strConnectionString As String = _
    "Data Source=//emad-pc:1521/emadeva;User ID=scott;Password=tiger;" '
    ' Associate the connection string with a connection object.
    Dim objOracleConnection As New OracleConnection(strConnectionString)
    ' SQL query for returning data rows.
    Dim strSqlQuery As String = _
    "Select dname, deptno " & _
    "From dept " & _
    "Where deptno = 10" '
    ' Command object to make this query work.
    Dim objOracleCommand As New OracleCommand(strSqlQuery, objOracleConnection)
    Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
    ' Identify what type of command is being used.
    objOracleCommand.CommandType = CommandType.Text
    Try
    objOracleConnection.Open()
    ' Set up a Data Reader and load it with data.
    Dim objOracleDataReader As OracleDataReader = _
    objOracleCommand.ExecuteReader()
    objOracleDataReader.Read()
    ' Convert the department number to a string.
    lblDepartmentNumberFromOracle.Text = _
    CStr(objOracleDataReader.Item("deptno"))
    Catch ex As Exception
    MessageBox.Show(ex.Message, "Error")
    End Try
    End Sub
    End Class
    I still want to thank you for the help you are providing.
    Truly,
    Emad

  • FRM-40735 Error when trying to add an employee as key member for a project

    FRM-40735: ON Insert trigger raised unhandled exception ORA-06502 in PAXPREPR when trying to add an employee as key member for a project
    Tried generating FND log messages to see if it shows any error messages but it didn't show any specific error.

    Error ORA-06502 says PL/SQL: numeric or value error.
    The Error could be in the data already exist in the system for key members. If this Project was created using APIs, there are possibilities that some other character( i.e. next line chracter ) got entered in the column value which Form "PAXPREPR" is not able to fetch or update.
    You can query the key member data from back-end to check if any data corruption is there. you may require data-fix to correct that.
    AB

  • CUPC goes offline when trying to add user

    CUPC 8.03 will go offline and reconnect when trying to add a user and it will say something about unable to add user to group. I would have to check again to see exactly what it says. This is only happening on a few users. I have tried logging in with my account on their computer and I can add the same people they could not. I have tried deleting everything in their local settings and application data related to cisco with no luck.
    I attached a detailed and simple log.
    The user that I was trying to add was Patti
    Has anyone seen this before? We have had nothing but trouble since upgrading to CUPC 8

    Hello,
    Please go the user option page of the user for CUPS and check the privacy policy if they are blocked or not
    if that fails try re-licensing the users from callmanager > system > licensing > capabilities assignment > "concerned user"
    and then restart the "intercluster sync agent" service from CUPS.
    Thanks

  • Error when trying to add a project to Subversion source control

    When trying to add a project to source control from within the OPM 10 studio (File - Source Control - Add Project to Source Control), the following error occurs:
    "There was a problem accessing the source control system, probably due to network or contention issues. A retry is recommended."
    This has been tried with Subversion versions 1.6.2, 1.6.5 and 1.6.6, with local repositories and repositories on a Apache webserver.
    Once the project has been added to a repository, by using TortoiseSVN for example, working with source control is no problem.
    Does anyone have a clue what the problem (and a solution) might be?
    Thanks,
    Theo.

    Hi,
    Davin mentioned:
    This appears to be an issue with the source control integration. We are looking into it.I am using OPM 10.0.1.14
    The OPM help on collaborating mentions:
    Open a rulebase project from source control
    To open an existing Oracle Policy Modeling project from a source control repository:
    In Oracle Policy Modeling, select File | Source Control | Open Existing Project from Source Control. When I open the File menu I do not see the "Source Control" at all.
    Is this caused by an installation error or part of the "issue with the source control integration" ?
    Please let me know if I'm the only one experiencing this problem ....
    Thankx,
    Paul

  • Error when trying to add transitions and titles

    I'm getting an error message on iMovie HD 5 when trying to add a title or transition that says, "error in system operation (-4960)" can anyone help me out here?
    thanks!

    Hi minD:
    This error usually indicates an OS problem, rather than iMovie problem.
    Prevent Mac Disasters
    Eight Simple Steps You Can Take Now to Keep Your Mac from Falling Apart
    http://www.macworld.com/2005/01/features/preventmacdisasters/index.php
    (Article is in 3 parts, don't miss parts 2 and 3)
    Sue
    (Thanks to Lennart Thelander for the copy & paste)

  • Visual Studio 2013 hangs/freezes when trying to click the designer view

    my Visual Studio 2013 update 1 hangs/freezes when trying to click the designer view, after clicking "Design" I can not click "split" neather "Source". What can I do ? I already tried to set the "HTML (Web Forms) Editor
    " as "Default"... thanks for support.
    In VS2010 the same worked fine.
    I "Run as Administrator".
    ty for help

    Hi,
    I assume that you are not using VS2013 Express version. In order to get the reason about the hang issue, please use devenv /log to gather activity.xm log and find HR error from this log.If it shows some package corrupt, try to repair your VS.
    Here are my general suggestions:
    Please try to run devenv /ResetSettings (in command prompt) to eliminate the related potential settings problem.
    Try disabling Add-ins (e.g. “Tools” | “Add-in Manager”) or run “devenv.exe /SafeMode”.This can eliminate the possibility that third party Add-ins or packages are causing problems. Also you can try these command lines:
    devenv.exe /resetskippkgs and devenv.exe /resetuserdata 
    Try to create a new user account. This can help isolate user profile corruption related causes.
    If the suggestions above are no help, please reinstall your VS.
    Thanks,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • I get error message when trying to add key tags

    I get error message when trying to add key tags

    You should always backup your iPad before ever doing anything major that coould result in a catastrophic loss is something goes wrong. You can then usually restore from the backup when your iPad has recovered.
    You should also be sure to have transfered any new purchases directly to your iPad to the iTunes app on your computer on a regular basis.

  • System error message when trying to preview catalog

    Hi there, we are putting together an e-commerce site, and continually get System Error Messages when trying to open the catalog
    http://shoprachbjewelry.businesscatalyst.com/black-lemon-collection
    An Error Occurred
    An error occurred processing your last request.
    Please go back and try again.

    Now my products are mising under the catagory.
    http://shoprachbjewelry.businesscatalyst.com/black-lemon-collection/Bracelets

  • When trying to add music to a slide show from my PC to TV through Apple Tv the photos are fine but I get an error message that says the music cannot be downloaded.

    When trying to add music to a slide show from my PC to TV through Apple Tv the photos are fine but I get an error message that says the music cannot be downloaded.

    Because the location for each song in your library is on your hard drive.  If the hard drive isn't there, how can iTunes play it?
    You'll have to move/copy the music from your hard drive to your computer's hard drive.
    Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
    -Delete EVERYTHING from iTunes, so that your library is now empty.
    -Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down.  You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
    -Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes.  Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked.  You can close Preferences now.
    -Now, drag and drop your music from your hard drive into your iTunes library.  iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
    Shouldn't have any more problems...

  • Error  message when trying to add new user

    Hello,
    Customer is working on 2005B (2005B 7.40.252 SP00 PL39).
    They are working on this database since 2009.
    No upgrade was recently done.
    when trying to add a new user they get athe following error:
    "A user was added outsite the application. Delet it, or preform'Restore Numbering' [Message 3512-7]"
    Could you please advice.
    Regards,
    Maya

    Hi Maya......
    Go to Administration--> Utility and select the restore no. series.
    Update this and try to add User.
    But do it first in your test DB.....
    Regards,
    Rahul

Maybe you are looking for