System hardlocks when ejecting firewire drives
Anyone else having this issue? I've had it since the 2.6.16 kernels, and I'm currently running -8. I have both an ipod and an external hard drive that will hang the system about 75% of the time when I "safely remove" or use the eject command and unhook them. Both are firewire. I can't find anything in the logs.
I may have solved this. Sometime during recent upgrades my system started loading the eth1394 module along with the regular 1394 modules. I've never seen this before, and have no use at all for it - more to the point, it was screwing with my existing ethernet. Reasoning there might be a connection, I've added eth1394 to my blacklist, and so far have not been able to make my box hang. I've also upgraded to 2.6.16.2 w/o issue.
Similar Messages
-
I've been using a collection of 500GB firewire G-Drives for pro-audio & time machine backups.
Up until now, they work great with my old 2006 MBP (OS 10.4) , and my late 2008 MBP (OS 10.5.6)
I just got a new 2009 MBP with Leopard 10.5.6 and whenever I mount the drives, I cannot eject them.
Its a mystery. No applications are open. Spotlight is not running. Everytime I try to eject a drive I get a message saying its in use.
My only remedy is to shut down the computer, and turn them off.
Any ideas?Means corrupted system files. You should reinstall OS X. You may try this:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update. -
MacBook Doesn't Wake Up (when External FireWire Drives attached)
Anybody else notice their MacBook not waking up from sleep when Fire Wire drives are attached, specifically through the FW port or the Express Card port.
Granted, the MacBook wakes up 50% of the time in general with nothing attached...kind of a crap shoot.Hi, I have a macbook air for some time now. It works fine, starts reasonable fast and with one exception I'm pleased with it.If I closed the LID or press the on-off button the system sleeps. When I open the lid the next day (8 -12 hrs later) the system doesn't wake up. The log file which I presume is send to Apple did lead to a patch. I saw on the support site various conversations in respect to this issue with various results.
I see that the problem of James even returned and was not reported to be resolved until now.
In my log I have the following messages, "Sleep failure" of last few days. What should I do to resolve this, or is Apple delivering a patch for this?
<Start log copy>
17-09-14 03:14:01,755 powerd[16]: com.apple.message.domain: com.apple.sleep.failure
com.apple.message.signature: Capability Failure
com.apple.message.summarize: YES
Sender_Mach_UUID: 83C854AA-0FB9-30C2-8443-D10D781E0E25
17-09-14 09:24:37,960 powerd[16]: com.apple.message.domain: com.apple.sleep.failure
com.apple.message.signature: Platform Failure
com.apple.message.summarize: YES
Sender_Mach_UUID: 83C854AA-0FB9-30C2-8443-D10D781E0E25
20-09-14 03:31:14,288 powerd[16]: com.apple.message.domain: com.apple.sleep.failure
com.apple.message.signature: Capability Failure
com.apple.message.summarize: YES
Sender_Mach_UUID: 83C854AA-0FB9-30C2-8443-D10D781E0E25
20-09-14 09:56:41,453 powerd[16]: com.apple.message.domain: com.apple.sleep.failure
com.apple.message.signature: Platform Failure
com.apple.message.summarize: YES
Sender_Mach_UUID: 83C854AA-0FB9-30C2-8443-D10D781E0E25
<end log copy>
regards, Roderick. -
Finder crashes when ejecting external drive
Hi have had my Macbook Pro (i5 early 2011) a month now and its crashed about 8-9 times, mostly it happens when trying to eject my external hard drive, the drive won't eject, so I tried a relaunch on finder, then finder disappears completely although everything else continues to work, I can access the Dock and utilities, Finder doesn't show up in Activity monitor. I have no choice but to do a hard restart. I thought it was the external drive as I had it partioned to MS-DOS and exfat but I just did a format and now its HFS with an exfat partition. Anyone any ideas? is it my Macbook, Lion or the drive you think?
I have the same issue by the sounds of it.
I am on clean install number three and all goes well, updates, move pics and music from external and reinstall all applications from fresh but when I complete a backup of the machine t an external drive, Finder seems to crash at random poionts or when thte backups try to eject the drive. I am at the end of my teather!
Will -
Disk Utility Fails When Partitioning FireWire Drive
I am getting this error when attempting to partition my FireWire drive.
"Disk utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility."
I know that Panther users have been having this same error pop up when they attempt to repair permissions. Something about the iTunes 6.0.2 update. I attempted to remove the package files, which was the fix for that issue, and then partition the drive, but it didn't help. This is a different issue. I can repair permissions fine, as well.
Booting from the Mac OS X Tiger install DVD, and using Disk Utility from there, works just fine. I want Disk Utility to work from the startup volume, however.
Has anyone else experienced this issue?
Does anyone have any suggestions as to how I can correct it?
Thanks!10.4.6 Combo Update has fixed the issue.
Thanks so much! I'm glad you happened to be awake and reading this board. I think something strange happened with the 10.4.6 update in the first place, because my Dock is always restored to the default look (I customize it with TransparentDock) every time Apple updates the OS. Also (maybe I shouldn't say this on an Apple board), my iBook is running Front Row, and it wasn't broken after the update, but it is now, which is fine, as long as Disk Utility works.
Thanks again for your help! -
Hi,
Whenever I mount a firewire drive, I cannot eject it again - I always get a -47 error, saying the drive is busy. I have TimeMachine turned OFF, so that shouldn't be causing the problem. Also, I never had any problems with this under Tiger.
Any ideas? I have tried all possible ways of unmounting the drive, but nothing works (except pulling the plug obviously.....)Hi,
Whenever I mount a firewire drive, I cannot eject it again - I always get a -47 error, saying the drive is busy. I have TimeMachine turned OFF, so that shouldn't be causing the problem. Also, I never had any problems with this under Tiger.
Any ideas? I have tried all possible ways of unmounting the drive, but nothing works (except pulling the plug obviously.....) -
Odd Issue when using Firewire drive with Leopard-Locks up Dock, etc.
I have an odd issue that has developed on my MBP using OS X 10.5.1 Leopard. It only appears to occur when I plug in my External Firewire Lacie Rugged Hard Drive. I only use that Hard Drive approximately once a week when doing a complete mirror backup of my MBP's Hard Drive using SuperDuper. As far as I can tell the issue occurs only once the Hard Drive is plugged in, not because of SuperDuper or the Backup.
Here is the issue: For some reason within a minute of plugging in my hard drive my Dock doesn't work. It scrolls when I put the mouse pointer down to the Dock but it won't open up any icons I click on. It's just like it doesn't recognize the left mouse button. Also, I am unable to select any menus at the top of the screen. I can left click on them and even right click on an icon such as Macintosh HD on the desktop and there is no response. I am able to drag Windows across my desktop though but it seems overall that my keyboard becomes inactive. For example in a open Numbers spreadsheet I am able to use the left mouse button (so it works then) to select a textbox and get the blinking cursor but yet if I type and use even the delete key there is no response. Even after I'm done with the Hard Drive if I drag the Lacie to the trash to eject it won't eject. The only way to eject it is simply pull the Firewire cable out.
I had a few issues with my system earlier and found out I had some bad memory. The memory was replaced and the problems went away. I am worried I had some corrupted files from that time but what puzzles me is I have used my laptop for weeks with no problems. It is only while I plug in this hard drive. In a worse case if I can't figure out how to fix it I feel I'll have to do a complete format and reinstall Leopard and I don't want to have to do that. This only occurs when I do the backup but can be a pain. Any ideas if I can fix this?Erase and reformat the ext HD. Then, redo the SuperDuper! backup.
-
Airport disconnects when external firewire drive is connected.
Hi,
This is a weird one. I bought an external firewire/USB2 enclosure a few days ago which I paired up with Western Digital 320GB drive. I haven't used it a lot as it's only for backups.
Today I was having trouble connecting to my Airport Express network in Windows XP (Bootcamp). Well it was Windows so I just thought it was being flaky. Then when I rebooted into OS X I had the same problem. I thought long and hard trying to work out what was different and pretty soon realised it was the drive. I had it connected to back up the Windows partition. It seems that airport just dies the minute the drive is connected via Firewire (but not USB2).
It's an el cheapo from ST Labs, called the S-111
System profiler lists the following:
Manufacturer: Prolific PL3507 Combo Device
Model: 0x1
GUID: 0x50770E00071002
Maximum Speed: Up to 400 Mb/sec
Connection Speed: Up to 400 Mb/sec
Sub-units:
(1394-ATAPI rev1.10) Unit:
Unit Software Version: 0x10483
Unit Spec ID: 0x609E
Firmware Revision: 0x12804
The system.log says the following:
Sep 16 19:29:02 josh diskarbitrationd[67]: disk1s2 hfs 3D4319C6-A855-366D-AC5D-3856B6826C3E Backup /Volumes/Backup
Sep 16 19:29:03 josh diskarbitrationd[67]: disk1s3 msdos 00000000-0000-0000-0000-000000000000 UNTITLED /Volumes/UNTITLED
Sep 16 19:29:22 josh kernel[0]: vmnet: bridge-en1: interface en is going DOWN
Anyone have any ideas?
JoshOK. I know no one answered this one but I'm going to update this just in case anyone has a similar problem.
Seems I jumped the gun (a little).
I hadn't tried both firewire 400 ports on the external drive. I tried the other and the problem disappeared.
So the lesson I've (re)learned is that you should try every possible port/cable configuration possible before seeking help.
Josh -
Screen flickering and system freezes when using Nouveau driver.
I'm testing the Nouveau driver on my computer, I really want to keep this driver installed because it makes XFCE to use less resources than the Nvidia proprietary driver. But when I start some apps like firefox or make changes to the desktop, the system stop responding and then the screen breaks.
I can't use the computer in that state so I force a shutdown.
I don't know how to see what is going wrong, because the proprietary driver don't give me these problems, I don't get any errors at dmesg log and Xorg log don't have any helpful information.
dmesg output:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.3-2-ARCH (tobias@testing) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Sun Mar 17 13:38:16 CET 2013
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000057feffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000057ff0000-0x0000000057ff2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000057ff3000-0x0000000057ffffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000058000000-0x000000005fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: Acer Aspire T180/EM61SM/EM61PM , BIOS R01-B4 06/15/2007
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x57ff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 base 0040000000 mask FFE0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000f3c90-0x000f3c9f] mapped at [c00f3c90]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x377fdfff]
[ 0.000000] [mem 0x00000000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x373fffff] page 2M
[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
[ 0.000000] kernel direct mapping tables up to 0x377fdfff @ [mem 0x01bfa000-0x01bfffff]
[ 0.000000] RAMDISK: [mem 0x37a46000-0x37d1afff]
[ 0.000000] Allocated new RAMDISK: [mem 0x37529000-0x377fd69f]
[ 0.000000] Move RAMDISK from [mem 0x37a46000-0x37d1a69f] to [mem 0x37529000-0x377fd69f]
[ 0.000000] ACPI: RSDP 000f8370 00014 (v00 ACRSYS)
[ 0.000000] ACPI: RSDT 57ff3040 0003C (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 57ff30c0 00074 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 57ff3180 0631A (v01 ACRSYS AWRDACPI 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 57ff0000 00040
[ 0.000000] ACPI: SSDT 57ff95c0 001C4 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 57ff9800 00038 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000098)
[ 0.000000] ACPI: SLIC 57ff9880 00176 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000001)
[ 0.000000] ACPI: MCFG 57ff9a40 0003C (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 57ff9500 0007C (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 519MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
[ 0.000000] HighMem [mem 0x377fe000-0x57feffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x57feffff]
[ 0.000000] On node 0 totalpages: 360319
[ 0.000000] free_area_init_node: node 0, pgdat c15ab3c0, node_mem_map f6a28200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1040 pages used for memmap
[ 0.000000] HighMem zone: 132066 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] e820: [mem 0x60000000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f6a05000 s32640 r0 d20608 u53248
[ 0.000000] pcpu-alloc: s32640 r0 d20608 u53248 alloc=13*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 357503
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=bb82c8c9-614f-4ce3-85f2-3597507c391d ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 2883328 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:00057ff0)
[ 0.000000] Memory: 1415956k/1441728k available (4184k kernel code, 25320k reserved, 1679k data, 560k init, 532424k highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc15ba000 - 0xc1646000 ( 560 kB)
.data : 0xc141613e - 0xc15b9d80 (1679 kB)
.text : 0xc1000000 - 0xc141613e (4184 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f6008000 soft=f600a000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1908.551 MHz processor
[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.003338] Calibrating delay loop (skipped), value calculated using timer frequency.. 3818.14 BogoMIPS (lpj=6361836)
[ 0.003343] pid_max: default: 32768 minimum: 301
[ 0.003404] Security Framework initialized
[ 0.003415] AppArmor: AppArmor disabled by boot time parameter
[ 0.003432] Mount-cache hash table entries: 512
[ 0.006819] Initializing cgroup subsys cpuacct
[ 0.006822] Initializing cgroup subsys memory
[ 0.006834] Initializing cgroup subsys devices
[ 0.006837] Initializing cgroup subsys freezer
[ 0.006840] Initializing cgroup subsys net_cls
[ 0.006842] Initializing cgroup subsys blkio
[ 0.006879] CPU: Physical Processor ID: 0
[ 0.006882] CPU: Processor Core ID: 0
[ 0.006885] mce: CPU supports 5 MCE banks
[ 0.006896] LVT offset 0 assigned for vector 0xf9
[ 0.006902] process: using AMD E400 aware idle routine
[ 0.006911] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
tlb_flushall_shift: 4
[ 0.007021] Freeing SMP alternatives: 16k freed
[ 0.007977] ACPI: Core revision 20121018
[ 0.015366] ftrace: allocating 18273 entries in 36 pages
[ 0.023490] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.024036] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.059250] smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ (fam: 0f, model: 6b, stepping: 01)
[ 0.059999] Performance Events: AMD PMU driver.
[ 0.059999] ... version: 0
[ 0.059999] ... bit width: 48
[ 0.059999] ... generic registers: 4
[ 0.059999] ... value mask: 0000ffffffffffff
[ 0.059999] ... max period: 00007fffffffffff
[ 0.059999] ... fixed-purpose events: 0
[ 0.059999] ... event mask: 000000000000000f
[ 0.078439] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.083409] CPU 1 irqstacks, hard=f60ba000 soft=f60bc000
[ 0.083412] smpboot: Booting Node 0, Processors #1 OK
[ 0.006666] Initializing CPU#1
[ 0.176732] Brought up 2 CPUs
[ 0.176736] smpboot: Total of 2 processors activated (7637.24 BogoMIPS)
[ 0.177423] devtmpfs: initialized
[ 0.177423] PM: Registering ACPI NVS region [mem 0x57ff0000-0x57ff2fff] (12288 bytes)
[ 0.178162] RTC time: 21:06:38, date: 03/21/13
[ 0.178225] NET: Registered protocol family 16
[ 0.178397] node 0 link 0: io port [8000, ffff]
[ 0.178401] TOM: 0000000060000000 aka 1536M
[ 0.178404] node 0 link 0: mmio [a0000, bffff]
[ 0.178408] node 0 link 0: mmio [60000000, efffffff]
[ 0.178411] node 0 link 0: mmio [f4000000, fe02ffff]
[ 0.178414] node 0 link 0: mmio [f0000000, f03fffff]
[ 0.178418] bus: [bus 00-04] on node 0 link 0
[ 0.178421] bus: 00 [io 0x0000-0xffff]
[ 0.178423] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.178425] bus: 00 [mem 0x60000000-0xf3ffffff]
[ 0.178428] bus: 00 [mem 0xf4000000-0xffffffff]
[ 0.178495] ACPI: bus type pci registered
[ 0.178575] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.178579] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.178581] PCI: Using MMCONFIG for extended config space
[ 0.178583] PCI: Using configuration type 1 for base access
[ 0.178677] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.178679] mtrr: probably your BIOS does not setup all CPUs.
[ 0.178681] mtrr: corrected configuration.
[ 0.180670] bio: create slab <bio-0> at 0
[ 0.180670] ACPI: Added _OSI(Module Device)
[ 0.180670] ACPI: Added _OSI(Processor Device)
[ 0.180670] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.180670] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.181260] ACPI: EC: Look up EC in DSDT
[ 0.186070] ACPI: Interpreter enabled
[ 0.186077] ACPI: (supports S0 S3 S4 S5)
[ 0.186098] ACPI: Using IOAPIC for interrupt routing
[ 0.193127] ACPI: No dock devices found.
[ 0.193134] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.193752] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-04])
[ 0.193756] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.193890] pci_root PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.193894] pci_root PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.195031] pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af] (ignored)
[ 0.195034] pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7] (ignored)
[ 0.195037] pci_root PNP0A08:00: host bridge window [io 0x8000-0xffff] (ignored)
[ 0.195040] pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df] (ignored)
[ 0.195044] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.195047] pci_root PNP0A08:00: host bridge window [mem 0x60000000-0xefffffff] (ignored)
[ 0.195050] pci_root PNP0A08:00: host bridge window [mem 0xf4000000-0xfe02ffff] (ignored)
[ 0.195053] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] (ignored)
[ 0.195057] pci_root PNP0A08:00: host bridge window [io 0x4700-0x470b] (ignored)
[ 0.195060] pci_root PNP0A08:00: host bridge window [io 0x1c00-0x1c80] (ignored)
[ 0.195063] pci_root PNP0A08:00: host bridge window [mem 0xfec80000-0xfecbffff] (ignored)
[ 0.195066] PCI: root bus 00: hardware-probed resources
[ 0.195117] PCI host bridge to bus 0000:00
[ 0.195121] pci_bus 0000:00: root bus resource [bus 00-04]
[ 0.195124] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.195127] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.195130] pci_bus 0000:00: root bus resource [mem 0x60000000-0xf3ffffff]
[ 0.195134] pci_bus 0000:00: root bus resource [mem 0xf4000000-0xffffffff]
[ 0.195161] pci 0000:00:00.0: [10de:03ea] type 00 class 0x050000
[ 0.195341] pci 0000:00:01.0: [10de:03e0] type 00 class 0x060100
[ 0.195384] pci 0000:00:01.1: [10de:03eb] type 00 class 0x0c0500
[ 0.195397] pci 0000:00:01.1: reg 10: [io 0xfc00-0xfc3f]
[ 0.195414] pci 0000:00:01.1: reg 20: [io 0x1c00-0x1c3f]
[ 0.195421] pci 0000:00:01.1: reg 24: [io 0xf400-0xf43f]
[ 0.195452] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.195469] pci 0000:00:01.2: [10de:03f5] type 00 class 0x050000
[ 0.195516] pci 0000:00:02.0: [10de:03f1] type 00 class 0x0c0310
[ 0.195527] pci 0000:00:02.0: reg 10: [mem 0xfe02f000-0xfe02ffff]
[ 0.195564] pci 0000:00:02.0: supports D1 D2
[ 0.195567] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.195583] pci 0000:00:02.1: [10de:03f2] type 00 class 0x0c0320
[ 0.195595] pci 0000:00:02.1: reg 10: [mem 0xfe02e000-0xfe02e0ff]
[ 0.195639] pci 0000:00:02.1: supports D1 D2
[ 0.195642] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.195665] pci 0000:00:04.0: [10de:03f3] type 01 class 0x060401
[ 0.195711] pci 0000:00:05.0: [10de:03f0] type 00 class 0x040300
[ 0.195723] pci 0000:00:05.0: reg 10: [mem 0xfe028000-0xfe02bfff]
[ 0.195768] pci 0000:00:05.0: PME# supported from D3hot D3cold
[ 0.195791] pci 0000:00:06.0: [10de:03ec] type 00 class 0x01018a
[ 0.195814] pci 0000:00:06.0: reg 20: [io 0xf000-0xf00f]
[ 0.195850] pci 0000:00:08.0: [10de:03f6] type 00 class 0x010185
[ 0.195860] pci 0000:00:08.0: reg 10: [io 0x09f0-0x09f7]
[ 0.195866] pci 0000:00:08.0: reg 14: [io 0x0bf0-0x0bf3]
[ 0.195872] pci 0000:00:08.0: reg 18: [io 0x0970-0x0977]
[ 0.195877] pci 0000:00:08.0: reg 1c: [io 0x0b70-0x0b73]
[ 0.195883] pci 0000:00:08.0: reg 20: [io 0xdc00-0xdc0f]
[ 0.195889] pci 0000:00:08.0: reg 24: [mem 0xfe02d000-0xfe02dfff]
[ 0.195922] pci 0000:00:08.1: [10de:03f6] type 00 class 0x010185
[ 0.195932] pci 0000:00:08.1: reg 10: [io 0x09e0-0x09e7]
[ 0.195938] pci 0000:00:08.1: reg 14: [io 0x0be0-0x0be3]
[ 0.195944] pci 0000:00:08.1: reg 18: [io 0x0960-0x0967]
[ 0.195949] pci 0000:00:08.1: reg 1c: [io 0x0b60-0x0b63]
[ 0.195955] pci 0000:00:08.1: reg 20: [io 0xc800-0xc80f]
[ 0.195961] pci 0000:00:08.1: reg 24: [mem 0xfe02c000-0xfe02cfff]
[ 0.196000] pci 0000:00:09.0: [10de:03e8] type 01 class 0x060400
[ 0.196032] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.196051] pci 0000:00:0b.0: [10de:03e9] type 01 class 0x060400
[ 0.196081] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.196098] pci 0000:00:0c.0: [10de:03e9] type 01 class 0x060400
[ 0.196128] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.196146] pci 0000:00:0d.0: [10de:03d0] type 00 class 0x030000
[ 0.196154] pci 0000:00:0d.0: reg 10: [mem 0xfb000000-0xfbffffff]
[ 0.196162] pci 0000:00:0d.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.196169] pci 0000:00:0d.0: reg 1c: [mem 0xfc000000-0xfcffffff 64bit]
[ 0.196177] pci 0000:00:0d.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.196209] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.196233] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.196253] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.196273] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.196335] pci 0000:01:09.0: [104c:8024] type 00 class 0x0c0010
[ 0.196350] pci 0000:01:09.0: reg 10: [mem 0xfdfff000-0xfdfff7ff]
[ 0.196359] pci 0000:01:09.0: reg 14: [mem 0xfdff8000-0xfdffbfff]
[ 0.196412] pci 0000:01:09.0: supports D1 D2
[ 0.196415] pci 0000:01:09.0: PME# supported from D0 D1 D2 D3hot
[ 0.196444] pci 0000:00:04.0: PCI bridge to [bus 01] (subtractive decode)
[ 0.196448] pci 0000:00:04.0: bridge window [io 0xb000-0xbfff]
[ 0.196452] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.196456] pci 0000:00:04.0: bridge window [mem 0xfd800000-0xfd8fffff pref]
[ 0.196459] pci 0000:00:04.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.196462] pci 0000:00:04.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.196465] pci 0000:00:04.0: bridge window [mem 0x60000000-0xf3ffffff] (subtractive decode)
[ 0.196469] pci 0000:00:04.0: bridge window [mem 0xf4000000-0xffffffff] (subtractive decode)
[ 0.196493] pci 0000:00:09.0: PCI bridge to [bus 02]
[ 0.196498] pci 0000:00:09.0: bridge window [io 0xa000-0xafff]
[ 0.196501] pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.196506] pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.196548] pci 0000:03:00.0: [11ab:4364] type 00 class 0x020000
[ 0.196565] pci 0000:03:00.0: reg 10: [mem 0xfdcfc000-0xfdcfffff 64bit]
[ 0.196575] pci 0000:03:00.0: reg 18: [io 0x9c00-0x9cff]
[ 0.196604] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.196648] pci 0000:03:00.0: supports D1 D2
[ 0.196651] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.203353] pci 0000:00:0b.0: PCI bridge to [bus 03]
[ 0.203357] pci 0000:00:0b.0: bridge window [io 0x9000-0x9fff]
[ 0.203361] pci 0000:00:0b.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.203365] pci 0000:00:0b.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.203390] pci 0000:00:0c.0: PCI bridge to [bus 04]
[ 0.203394] pci 0000:00:0c.0: bridge window [io 0x8000-0x8fff]
[ 0.203398] pci 0000:00:0c.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.203402] pci 0000:00:0c.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.203413] pci_bus 0000:00: on NUMA node 0
[ 0.203424] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.203569] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.242482] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.242536] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.242587] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.242639] ACPI: PCI Interrupt Link [LNK4] (IRQs *5 7 9 10 11 14 15)
[ 0.242689] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.242741] ACPI: PCI Interrupt Link [LNK6] (IRQs *5 7 9 10 11 14 15)
[ 0.242791] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.242842] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.242894] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 *11 14 15)
[ 0.242944] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.242996] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15)
[ 0.243045] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.243098] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
[ 0.243148] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.243204] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)
[ 0.243265] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)
[ 0.243315] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.243375] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15)
[ 0.243432] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)
[ 0.243524] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.243606] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 0.243688] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 0.243770] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
[ 0.243851] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[ 0.243933] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
[ 0.244014] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[ 0.244095] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 0.244176] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0
[ 0.244258] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[ 0.244340] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
[ 0.244422] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.244504] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[ 0.244586] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 0.244669] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[ 0.244751] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 0.244833] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.244921] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.245004] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[ 0.245086] vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.245086] vgaarb: loaded
[ 0.245086] vgaarb: bridge control possible 0000:00:0d.0
[ 0.245086] PCI: Using ACPI for IRQ routing
[ 0.246696] PCI: pci_cache_line_size set to 64 bytes
[ 0.246745] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 0.246748] e820: reserve RAM buffer [mem 0x57ff0000-0x57ffffff]
[ 0.246902] NetLabel: Initializing
[ 0.246904] NetLabel: domain hash size = 128
[ 0.246906] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.246923] NetLabel: unlabeled traffic allowed by default
[ 0.246950] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.246956] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
[ 0.246961] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.256702] Switching to clocksource hpet
[ 0.264319] pnp: PnP ACPI init
[ 0.264346] ACPI: bus type pnp registered
[ 0.264605] system 00:00: [io 0x1000-0x107f] has been reserved
[ 0.264609] system 00:00: [io 0x1080-0x10ff] has been reserved
[ 0.264613] system 00:00: [io 0x1400-0x147f] has been reserved
[ 0.264616] system 00:00: [io 0x1480-0x14ff] has been reserved
[ 0.264620] system 00:00: [io 0x1800-0x187f] has been reserved
[ 0.264623] system 00:00: [io 0x1880-0x18ff] has been reserved
[ 0.264628] system 00:00: [mem 0xfefe0000-0xfefe01ff] has been reserved
[ 0.264631] system 00:00: [mem 0xfefe1000-0xfefe10ff] has been reserved
[ 0.264635] system 00:00: [mem 0x58000000-0x5fffffff] has been reserved
[ 0.264641] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.265431] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.265434] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.265438] system 00:01: [io 0x0290-0x0297] has been reserved
[ 0.265442] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.265458] pnp 00:02: [dma 4]
[ 0.265495] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.265606] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.265670] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.265714] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.265772] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.266190] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.266522] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.266948] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.267129] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.267201] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.267285] system 00:0c: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.267290] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.267506] system 00:0d: [mem 0x000d0000-0x000d3fff] has been reserved
[ 0.267510] system 00:0d: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.267514] system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.267517] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.267521] system 00:0d: [mem 0xfeff0000-0xfeff00ff] has been reserved
[ 0.267525] system 00:0d: [mem 0x57ff0000-0x57ffffff] could not be reserved
[ 0.267528] system 00:0d: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.267532] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.267535] system 00:0d: [mem 0x00100000-0x57feffff] could not be reserved
[ 0.267539] system 00:0d: [mem 0x58000000-0x5fffffff] has been reserved
[ 0.267543] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.267546] system 00:0d: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.267550] system 00:0d: [mem 0xfefff000-0xfeffffff] has been reserved
[ 0.267554] system 00:0d: [mem 0xfff80000-0xfff80fff] has been reserved
[ 0.267557] system 00:0d: [mem 0xfff90000-0xfffbffff] has been reserved
[ 0.267561] system 00:0d: [mem 0xfffed000-0xfffeffff] has been reserved
[ 0.267565] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.267589] pnp: PnP ACPI: found 14 devices
[ 0.267590] ACPI: ACPI bus type pnp unregistered
[ 0.305593] pci 0000:00:0d.0: BAR 6: assigned [mem 0x60000000-0x6001ffff pref]
[ 0.305599] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.305603] pci 0000:00:04.0: bridge window [io 0xb000-0xbfff]
[ 0.305608] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.305612] pci 0000:00:04.0: bridge window [mem 0xfd800000-0xfd8fffff pref]
[ 0.305617] pci 0000:00:09.0: PCI bridge to [bus 02]
[ 0.305621] pci 0000:00:09.0: bridge window [io 0xa000-0xafff]
[ 0.305625] pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.305629] pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.305635] pci 0000:03:00.0: BAR 6: assigned [mem 0xfdb00000-0xfdb1ffff pref]
[ 0.305638] pci 0000:00:0b.0: PCI bridge to [bus 03]
[ 0.305641] pci 0000:00:0b.0: bridge window [io 0x9000-0x9fff]
[ 0.305645] pci 0000:00:0b.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.305649] pci 0000:00:0b.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.305654] pci 0000:00:0c.0: PCI bridge to [bus 04]
[ 0.305657] pci 0000:00:0c.0: bridge window [io 0x8000-0x8fff]
[ 0.305661] pci 0000:00:0c.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.305665] pci 0000:00:0c.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.305677] pci 0000:00:04.0: setting latency timer to 64
[ 0.305686] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.305689] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.305692] pci_bus 0000:00: resource 6 [mem 0x60000000-0xf3ffffff]
[ 0.305696] pci_bus 0000:00: resource 7 [mem 0xf4000000-0xffffffff]
[ 0.305699] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.305702] pci_bus 0000:01: resource 1 [mem 0xfdf00000-0xfdffffff]
[ 0.305706] pci_bus 0000:01: resource 2 [mem 0xfd800000-0xfd8fffff pref]
[ 0.305709] pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
[ 0.305712] pci_bus 0000:01: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.305715] pci_bus 0000:01: resource 6 [mem 0x60000000-0xf3ffffff]
[ 0.305718] pci_bus 0000:01: resource 7 [mem 0xf4000000-0xffffffff]
[ 0.305722] pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
[ 0.305725] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.305729] pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.305732] pci_bus 0000:03: resource 0 [io 0x9000-0x9fff]
[ 0.305735] pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 0.305738] pci_bus 0000:03: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.305742] pci_bus 0000:04: resource 0 [io 0x8000-0x8fff]
[ 0.305745] pci_bus 0000:04: resource 1 [mem 0xfda00000-0xfdafffff]
[ 0.305748] pci_bus 0000:04: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.305804] NET: Registered protocol family 2
[ 0.305997] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.306061] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.306122] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.306184] TCP: reno registered
[ 0.306188] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.306204] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.306279] NET: Registered protocol family 1
[ 0.306537] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[ 0.370181] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 0.370249] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.370299] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.370357] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.370411] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.370469] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.370531] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.370598] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.370606] pci 0000:00:0d.0: Boot video device
[ 0.370621] PCI: CLS 64 bytes, default 64
[ 0.370687] Unpacking initramfs...
[ 0.455995] Freeing initrd memory: 2900k freed
[ 0.459106] apm: BIOS not found.
[ 0.459448] audit: initializing netlink socket (disabled)
[ 0.459468] type=2000 audit(1363899998.456:1): initialized
[ 0.474029] bounce pool size: 64 pages
[ 0.474052] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.476263] VFS: Disk quotas dquot_6.5.2
[ 0.476327] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.476593] msgmni has been set to 1731
[ 0.476998] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.477042] io scheduler noop registered
[ 0.477044] io scheduler deadline registered
[ 0.477053] io scheduler cfq registered (default)
[ 0.477195] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
[ 0.477269] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X
[ 0.477329] pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X
[ 0.477469] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 0.477471] vesafb: scrolling: redraw
[ 0.477474] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.477558] vesafb: framebuffer at 0xe0000000, mapped to 0xf8080000, using 1216k, total 1216k
[ 0.484141] Console: switching to colour frame buffer device 80x30
[ 0.490611] fb0: VESA VGA frame buffer device
[ 0.490704] GHES: HEST is not enabled!
[ 0.490719] isapnp: Scanning for PnP cards...
[ 0.802592] isapnp: No Plug & Play device found
[ 0.802671] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.823231] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.843779] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.844469] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.844915] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.844951] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.845087] mousedev: PS/2 mouse device common for all mice
[ 0.845182] rtc_cmos 00:04: RTC can wake from S4
[ 0.845358] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.845400] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 0.845435] cpuidle: using governor ladder
[ 0.845437] cpuidle: using governor menu
[ 0.845439] EFI Variables Facility v0.08 2004-May-17
[ 0.845489] drop_monitor: Initializing network drop monitor service
[ 0.845593] TCP: cubic registered
[ 0.845736] NET: Registered protocol family 10
[ 0.845940] NET: Registered protocol family 17
[ 0.845958] Key type dns_resolver registered
[ 0.846129] Using IPI No-Shortcut mode
[ 0.846264] PM: Hibernation image not present or could not be loaded.
[ 0.846279] registered taskstats version 1
[ 0.846851] Magic number: 5:851:146
[ 0.846912] acpi device:17: hash matches
[ 0.846972] rtc_cmos 00:04: setting system clock to 2013-03-21 21:06:39 UTC (1363899999)
[ 0.847246] Freeing unused kernel memory: 560k freed
[ 0.847645] Write protecting the kernel text: 4188k
[ 0.847679] Write protecting the kernel read-only data: 1284k
[ 0.858078] systemd-udevd[45]: starting version 198
[ 0.864682] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.904637] ACPI: bus type usb registered
[ 0.904681] usbcore: registered new interface driver usbfs
[ 0.904697] usbcore: registered new interface driver hub
[ 0.904815] usbcore: registered new device driver usb
[ 0.906826] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.908458] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.908536] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 0.908541] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 0.908550] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 0.908594] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000
[ 0.910252] ehci-pci: EHCI PCI platform driver
[ 0.910290] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 0.910329] firewire_ohci 0000:01:09.0: setting latency timer to 64
[ 0.912040] SCSI subsystem initialized
[ 0.915768] ACPI: bus type scsi registered
[ 0.918637] libata version 3.00 loaded.
[ 0.962268] hub 1-0:1.0: USB hub found
[ 0.962279] hub 1-0:1.0: 10 ports detected
[ 0.962535] ehci-pci 0000:00:02.1: setting latency timer to 64
[ 0.962539] ehci-pci 0000:00:02.1: EHCI Host Controller
[ 0.962547] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 2
[ 0.962559] ehci-pci 0000:00:02.1: debug port 1
[ 0.962589] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[ 0.962617] ehci-pci 0000:00:02.1: irq 22, io mem 0xfe02e000
[ 0.970035] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 0.970261] hub 2-0:1.0: USB hub found
[ 0.970268] hub 2-0:1.0: 10 ports detected
[ 0.970681] pata_amd 0000:00:06.0: version 0.4.1
[ 0.970736] pata_amd 0000:00:06.0: setting latency timer to 64
[ 0.971618] scsi0 : pata_amd
[ 0.972200] scsi1 : pata_amd
[ 0.972449] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 0.972452] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 0.972517] sata_nv 0000:00:08.0: version 3.5
[ 0.972721] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
[ 0.972802] sata_nv 0000:00:08.0: setting latency timer to 64
[ 0.973161] scsi2 : sata_nv
[ 0.973470] scsi3 : sata_nv
[ 0.973598] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 21
[ 0.973602] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 21
[ 0.973822] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
[ 0.973886] sata_nv 0000:00:08.1: setting latency timer to 64
[ 0.974209] scsi4 : sata_nv
[ 0.974369] scsi5 : sata_nv
[ 0.974488] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 20
[ 0.974491] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 20
[ 1.130346] ata1.00: ATAPI: HL-DT-ST DVDRAM_GSA-H40N, RA00, max UDMA/66
[ 1.130357] ata1: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (30:600:0x13)
[ 1.143604] ata1.00: configured for UDMA/66
[ 1.149515] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM_GSA-H40N RA00 PQ: 0 ANSI: 5
[ 1.149876] ata2: port disabled--ignoring
[ 1.297028] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.297032] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.633688] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.643352] firewire_ohci 0000:01:09.0: failed to read phy reg
[ 1.643576] firewire_ohci: probe of 0000:01:09.0 failed with error -16
[ 1.730033] usb 1-4: new low-speed USB device number 2 using ohci_hcd
[ 1.936808] usbcore: registered new interface driver usbhid
[ 1.936814] usbhid: USB HID core driver
[ 2.100049] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.107021] ata6.00: ATA-7: Hitachi HDS721616PLA380, P22OAB3A, max UDMA/133
[ 2.107025] ata6.00: 321672960 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.120325] ata6.00: configured for UDMA/133
[ 2.120524] scsi 5:0:0:0: Direct-Access ATA Hitachi HDS72161 P22O PQ: 0 ANSI: 5
[ 2.125055] sd 5:0:0:0: [sda] 321672960 512-byte logical blocks: (164 GB/153 GiB)
[ 2.125119] sd 5:0:0:0: [sda] Write Protect is off
[ 2.125123] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.125149] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.131113] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.131120] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.131457] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 2.146217] sda: sda1 sda2 sda3
[ 2.146831] sd 5:0:0:0: [sda] Attached SCSI disk
[ 2.206694] usb 1-8: new full-speed USB device number 3 using ohci_hcd
[ 2.407819] Initializing USB Mass Storage driver...
[ 2.408184] scsi6 : usb-storage 1-8:1.0
[ 2.408335] usbcore: registered new interface driver usb-storage
[ 2.408337] USB Mass Storage support registered.
[ 2.542664] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.014632] systemd[1]: Smack is not enabled in the kernel, not loading access rules.
[ 3.097131] systemd[1]: systemd 198 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 3.097800] systemd[1]: Set hostname to <acer-aspire>.
[ 3.352860] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 3.352959] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.352983] systemd[1]: Expecting device sys-subsystem-net-devices-enp3s0.device...
[ 3.353005] systemd[1]: Starting Remote File Systems.
[ 3.353024] systemd[1]: Reached target Remote File Systems.
[ 3.353041] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 3.353091] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.353108] systemd[1]: Starting LVM2 metadata daemon socket.
[ 3.353156] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.353173] systemd[1]: Starting Delayed Shutdown Socket.
[ 3.353206] systemd[1]: Listening on Delayed Shutdown Socket.
[ 3.353222] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 3.353253] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.353274] systemd[1]: Starting Journal Socket.
[ 3.353366] systemd[1]: Listening on Journal Socket.
[ 3.354821] systemd[1]: Starting Apply Kernel Variables...
[ 3.357143] systemd[1]: Mounting Huge Pages File System...
[ 3.363518] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.370154] systemd[1]: Mounting Debug File System...
[ 3.385832] systemd[1]: Starting Journal Service...
[ 3.393610] systemd[1]: Started Journal Service.
[ 3.393800] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 3.393975] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.407359] systemd[1]: Started Set Up Additional Binary Formats.
[ 3.407389] systemd[1]: Starting Encrypted Volumes.
[ 3.407409] systemd[1]: Reached target Encrypted Volumes.
[ 3.407431] systemd[1]: Starting Setup Virtual Console...
[ 3.410492] systemd[1]: Starting udev Kernel Socket.
[ 3.410553] systemd[1]: Listening on udev Kernel Socket.
[ 3.410641] systemd[1]: Starting udev Control Socket.
[ 3.410689] systemd[1]: Listening on udev Control Socket.
[ 3.410760] systemd[1]: Starting udev Coldplug all Devices...
[ 3.417037] systemd[1]: Starting udev Kernel Device Manager...
[ 3.418761] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 3.436758] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 3.441505] systemd[1]: Started Load Kernel Modules.
[ 3.441546] systemd[1]: Mounted FUSE Control File System.
[ 3.441570] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 3.441652] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.441693] systemd[1]: Mounting Configuration File System...
[ 3.465751] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 3.476732] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 3.505747] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 3.516728] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[ 3.549724] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[ 3.553823] systemd[1]: Expecting device dev-disk-by\x2duuid-bb5a3cc3\x2d55fd\x2d4830\x2d8177\x2ddd32df9bd303.device...
[ 3.553856] systemd[1]: Mounting Temporary Directory...
[ 3.571730] sd 6:0:0:3: [sde] Attached SCSI removable disk
[ 3.744908] systemd-udevd[126]: starting version 198
[ 3.777101] systemd[1]: Started File System Check on Root Device.
[ 3.777142] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 3.790819] systemd[1]: Started udev Kernel Device Manager.
[ 3.800185] systemd[1]: Started Apply Kernel Variables.
[ 4.118718] EXT4-fs (sda2): re-mounted. Opts: data=ordered
[ 4.205364] systemd-journald[122]: Received SIGUSR1
[ 5.423026] thermal LNXTHERM:00: registered as thermal_zone0
[ 5.423033] ACPI: Thermal Zone [THRM] (40 C)
[ 5.463049] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 5.484558] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 5.484570] ACPI: Power Button [PWRB]
[ 5.484693] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 5.484697] ACPI: Power Button [PWRF]
[ 5.491085] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 5.542488] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
[ 5.542524] i2c i2c-1: nForce2 SMBus adapter at 0xf400
[ 5.547898] Linux agpgart interface v0.103
[ 5.558914] ACPI: Fan [FAN] (on)
[ 5.559089] [drm] Initialized drm 1.1.0 20060810
[ 5.565468] microcode: AMD CPU family 0xf not supported
[ 5.567533] microcode: AMD CPU family 0xf not supported
[ 5.642735] wmi: Mapper loaded
[ 5.645076] kvm: Nested Virtualization enabled
[ 5.649689] powernow-k8: fid 0xb (1900 MHz), vid 0xc
[ 5.649696] powernow-k8: fid 0xa (1800 MHz), vid 0xd
[ 5.649699] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[ 5.649987] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ (2 cpu cores) (version 2.20.00)
[ 5.685561] checking generic (e0000000 130000) vs hw (e0000000 10000000)
[ 5.685568] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
[ 5.685594] Console: switching to colour dummy device 80x25
[ 5.685773] nouveau 0000:00:0d.0: setting latency timer to 64
[ 5.686326] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 23
[ 5.686707] nouveau [ DEVICE][0000:00:0d.0] BOOT0 : 0x04c000a2
[ 5.686715] nouveau [ DEVICE][0000:00:0d.0] Chipset: C61 (NV4C)
[ 5.686722] nouveau [ DEVICE][0000:00:0d.0] Family : NV40
[ 5.687642] nouveau [ VBIOS][0000:00:0d.0] checking PRAMIN for image...
[ 5.733281] nouveau [ VBIOS][0000:00:0d.0] ... appears to be valid
[ 5.733287] nouveau [ VBIOS][0000:00:0d.0] using image from PRAMIN
[ 5.733560] nouveau [ VBIOS][0000:00:0d.0] BIT signature found
[ 5.733565] nouveau [ VBIOS][0000:00:0d.0] version 05.61.32.25.04
[ 5.733746] nouveau [ PFB][0000:00:0d.0] RAM type: unknown
[ 5.733749] nouveau [ PFB][0000:00:0d.0] RAM size: 128 MiB
[ 5.733752] nouveau [ PFB][0000:00:0d.0] ZCOMP: 0 tags
[ 5.761373] [TTM] Zone kernel: Available graphics memory: 443504 kiB
[ 5.761379] [TTM] Zone highmem: Available graphics memory: 709716 kiB
[ 5.761381] [TTM] Initializing pool allocator
[ 5.761831] nouveau [ DRM] VRAM: 125 MiB
[ 5.761838] nouveau [ DRM] GART: 512 MiB
[ 5.761844] nouveau [ DRM] BIT BIOS found
[ 5.761848] nouveau [ DRM] Bios version 05.61.32.25
[ 5.761852] nouveau [ DRM] TMDS table version 1.1
[ 5.761855] nouveau [ DRM] DCB version 3.0
[ 5.761859] nouveau [ DRM] DCB outp 00: 01000310 00000023
[ 5.761863] nouveau [ DRM] DCB outp 01: 00110204 98830003
[ 5.761865] nouveau [ DRM] DCB conn 00: 0000
[ 5.761869] nouveau [ DRM] DCB conn 01: 1131
[ 5.761872] nouveau [ DRM] DCB conn 02: 0110
[ 5.761875] nouveau [ DRM] DCB conn 03: 0111
[ 5.761877] nouveau [ DRM] DCB conn 04: 0113
[ 5.762420] nouveau W[ DRM] DCB type 4 not known
[ 5.762425] nouveau W[ DRM] Unknown-1 has no encoders, removing
[ 5.763281] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 5.763283] [drm] No driver support for vblank timestamp query.
[ 5.763931] nouveau [ DRM] 1 available performance level(s)
[ 5.763937] nouveau [ DRM] 0: core 425MHz shader 425MHz fanspeed 100%
[ 5.763939] nouveau [ DRM] c:
[ 5.765435] nouveau [ DRM] MM: using M2MF for buffer copies
[ 5.811870] sky2: driver version 1.30
[ 5.812122] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
[ 5.812188] sky2 0000:03:00.0: Yukon-2 EC Ultra chip revision 2
[ 5.812268] sky2 0000:03:00.0: irq 43 for MSI/MSI-X
[ 5.812560] sky2 0000:03:00.0 eth0: addr 00:19:21:28:95:2d
[ 5.814804] composite sync not supported
[ 5.815267] nouveau [ DRM] allocated 1440x900 fb: 0x9000, bo f63fa000
[ 5.815425] fbcon: nouveaufb (fb0) is primary device
[ 5.829143] IT8726 SuperIO detected.
[ 5.829405] parport_pc 00:09: reported by Plug and Play ACPI
[ 5.829453] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 5.856121] ppdev: user-space parallel port driver
[ 5.877128] Console: switching to colour frame buffer device 180x56
[ 5.878923] nouveau 0000:00:0d.0: fb0: nouveaufb frame buffer device
[ 5.878929] nouveau 0000:00:0d.0: registered panic notifier
[ 5.878952] [drm] Initialized nouveau 1.1.0 20120801 for 0000:00:0d.0 on minor 0
[ 5.879707] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
[ 5.879730] hda_intel: Disabling MSI
[ 5.879786] snd_hda_intel 0000:00:05.0: setting latency timer to 64
[ 6.023710] systemd-udevd[151]: renamed network interface eth0 to enp3s0
[ 6.497697] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:02.0/usb1/1-4/1-4:1.0/input/input4
[ 6.498447] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:02.0-4/input0
[ 6.533068] Adding 997756k swap on /dev/sda3. Priority:-1 extents:1 across:997756k
[ 6.633135] sky2 0000:03:00.0 enp3s0: enabling interface
[ 6.633209] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 6.846889] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:05.0/input/input5
[ 7.603865] input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input6
[ 7.604089] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input7
[ 7.604265] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input8
[ 7.604442] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:05.0/sound/card0/input9
[ 7.604616] input: HDA NVidia Line Out Side as /devices/pci0000:00/0000:00:05.0/sound/card0/input10
[ 7.604791] input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:05.0/sound/card0/input11
[ 7.604969] input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:05.0/sound/card0/input12
[ 7.605141] input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:05.0/sound/card0/input13
[ 8.208529] composite sync not supported
[ 8.244451] composite sync not supported
[ 8.450333] sky2 0000:03:00.0 enp3s0: Link is up at 100 Mbps, full duplex, flow control both
[ 8.450367] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[ 20.811802] composite sync not supported
[ 23.142014] EXT4-fs (sda2): re-mounted. Opts: data=ordered,commit=0
[ 84.047784] usb 1-4: USB disconnect, device number 2
[ 85.606696] usb 1-4: new low-speed USB device number 4 using ohci_hcd
[ 85.814008] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:02.0/usb1/1-4/1-4:1.0/input/input14
[ 85.814445] hid-generic 0003:093A:2510.0002: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:02.0-4/input0
[ 389.250323] composite sync not supported
Xorg log:
[ 7.949]
X.Org X Server 1.14.0
Release Date: 2013-03-05
[ 7.949] X Protocol Version 11, Revision 0
[ 7.949] Build Operating System: Linux 3.8.2-1-ARCH i686
[ 7.949] Current Operating System: Linux acer-aspire 3.8.3-2-ARCH #1 SMP PREEMPT Sun Mar 17 13:38:16 CET 2013 i686
[ 7.949] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=bb82c8c9-614f-4ce3-85f2-3597507c391d ro quiet
[ 7.949] Build Date: 09 March 2013 11:46:22AM
[ 7.949]
[ 7.949] Current version of pixman: 0.28.2
[ 7.949] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 7.949] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 7.949] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 21 15:06:46 2013
[ 7.988] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 8.001] (==) No Layout section. Using the first Screen section.
[ 8.001] (==) No screen section available. Using defaults.
[ 8.001] (**) |-->Screen "Default Screen Section" (0)
[ 8.001] (**) | |-->Monitor "<default monitor>"
[ 8.011] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 8.011] (==) Automatically adding devices
[ 8.011] (==) Automatically enabling devices
[ 8.011] (==) Automatically adding GPU devices
[ 8.060] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 8.060] Entry deleted from font path.
[ 8.060] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 8.060] Entry deleted from font path.
[ 8.060] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 8.060] Entry deleted from font path.
[ 8.060] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 8.060] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 8.060] Entry deleted from font path.
[ 8.060] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 8.060] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 8.060] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 8.060] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 8.069] (II) Loader magic: 0x825b620
[ 8.069] (II) Module ABI versions:
[ 8.069] X.Org ANSI C Emulation: 0.4
[ 8.069] X.Org Video Driver: 14.1
[ 8.069] X.Org XInput driver : 19.1
[ 8.069] X.Org Server Extension : 7.0
[ 8.069] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 8.072] (--) PCI:*(0:0:13:0) 10de:03d0:1019:2601 rev 162, Mem @ 0xfb000000/16777216, 0xe0000000/268435456, 0xfc000000/16777216, BIOS @ 0x????????/131072
[ 8.073] Initializing built-in extension Generic Event Extension
[ 8.073] Initializing built-in extension SHAPE
[ 8.073] Initializing built-in extension MIT-SHM
[ 8.073] Initializing built-in extension XInputExtension
[ 8.073] Initializing built-in extension XTEST
[ 8.073] Initializing built-in extension BIG-REQUESTS
[ 8.073] Initializing built-in extension SYNC
[ 8.073] Initializing built-in extension XKEYBOARD
[ 8.073] Initializing built-in extension XC-MISC
[ 8.073] Initializing built-in extension SECURITY
[ 8.073] Initializing built-in extension XINERAMA
[ 8.073] Initializing built-in extension XFIXES
[ 8.073] Initializing built-in extension RENDER
[ 8.073] Initializing built-in extension RANDR
[ 8.073] Initializing built-in extension COMPOSITE
[ 8.073] Initializing built-in extension DAMAGE
[ 8.073] Initializing built-in extension MIT-SCREEN-SAVER
[ 8.073] Initializing built-in extension DOUBLE-BUFFER
[ 8.073] Initializing built-in extension RECORD
[ 8.073] Initializing built-in extension DPMS
[ 8.073] Initializing built-in extension X-Resource
[ 8.073] Initializing built-in extension XVideo
[ 8.073] Initializing built-in extension XVideo-MotionCompensation
[ 8.073] Initializing built-in extension XFree86-VidModeExtension
[ 8.073] Initializing built-in extension XFree86-DGA
[ 8.073] Initializing built-in extension XFree86-DRI
[ 8.073] Initializing built-in extension DRI2
[ 8.073] (II) LoadModule: "glx"
[ 8.099] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 8.133] (II) Module glx: vendor="X.Org Foundation"
[ 8.133] compiled for 1.14.0, module version = 1.0.0
[ 8.133] ABI class: X.Org Server Extension, version 7.0
[ 8.133] (==) AIGLX enabled
[ 8.134] Loading extension GLX
[ 8.134] (==) Matched nouveau as autoconfigured driver 0
[ 8.134] (==) Matched nvidia as autoconfigured driver 1
[ 8.134] (==) Matched nv as autoconfigured driver 2
[ 8.134] (==) Matched nouveau as autoconfigured driver 3
[ 8.134] (==) Matched nvidia as autoconfigured driver 4
[ 8.134] (==) Matched nv as autoconfigured driver 5
[ 8.134] (==) Matched vesa as autoconfigured driver 6
[ 8.134] (==) Matched modesetting as autoconfigured driver 7
[ 8.134] (==) Matched fbdev as autoconfigured driver 8
[ 8.134] (==) Assigned the driver to the xf86ConfigLayout
[ 8.134] (II) LoadModule: "nouveau"
[ 8.134] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 8.154] (II) Module nouveau: vendor="X.Org Foundation"
[ 8.154] compiled for 1.14.0, module version = 1.0.6
[ 8.154] Module class: X.Org Video Driver
[ 8.154] ABI class: X.Org Video Driver, version 14.1
[ 8.154] (II) LoadModule: "nvidia"
[ 8.155] (WW) Warning, couldn't open module nvidia
[ 8.155] (II) UnloadModule: "nvidia"
[ 8.155] (II) Unloading nvidia
[ 8.155] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 8.155] (II) LoadModule: "nv"
[ 8.155] (WW) Warning, couldn't open module nv
[ 8.155] (II) UnloadModule: "nv"
[ 8.155] (II) Unloading nv
[ 8.155] (EE) Failed to load module "nv" (module does not exist, 0)
[ 8.155] (II) LoadModule: "vesa"
[ 8.156] (WW) Warning, couldn't open module vesa
[ 8.156] (II) UnloadModule: "vesa"
[ 8.156] (II) Unloading vesa
[ 8.156] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 8.156] (II) LoadModule: "modesetting"
[ 8.156] (WW) Warning, couldn't open module modesetting
[ 8.156] (II) UnloadModule: "modesetting"
[ 8.156] (II) Unloading modesetting
[ 8.157] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 8.157] (II) LoadModule: "fbdev"
[ 8.157] (WW) Warning, couldn't open module fbdev
[ 8.157] (II) UnloadModule: "fbdev"
[ 8.157] (II) Unloading fbdev
[ 8.157] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 8.157] (II) NOUVEAU driver
[ 8.157] (II) NOUVEAU driver for NVIDIA chipset families :
[ 8.157] RIVA TNT (NV04)
[ 8.157] RIVA TNT2 (NV05)
[ 8.157] GeForce 256 (NV10)
[ 8.157] GeForce 2 (NV11, NV15)
[ 8.157] GeForce 4MX (NV17, NV18)
[ 8.157] GeForce 3 (NV20)
[ 8.158] GeForce 4Ti (NV25, NV28)
[ 8.158] GeForce FX (NV3x)
[ 8.158] GeForce 6 (NV4x)
[ 8.158] GeForce 7 (G7x)
[ 8.158] GeForce 8 (G8x)
[ 8.158] GeForce GTX 200 (NVA0)
[ 8.158] GeForce GTX 400 (NVC0)
[ 8.158] (++) using VT number 7
[ 8.175] (II) [drm] nouveau interface version: 1.1.0
[ 8.175] (II) Loading sub module "dri"
[ 8.175] (II) LoadModule: "dri"
[ 8.175] (II) Module "dri" already built-in
[ 8.175] (II) NOUVEAU(0): Loaded DRI module
[ 8.175] (--) NOUVEAU(0): Chipset: "NVIDIA NV4c"
[ 8.175] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 8.175] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 8.175] (==) NOUVEAU(0): RGB weight 888
[ 8.175] (==) NOUVEAU(0): Default visual is TrueColor
[ 8.175] (==) NOUVEAU(0): Using HW cursor
[ 8.175] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 8.175] (==) NOUVEAU(0): Page flipping enabled
[ 8.175] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[ 8.208] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[ 8.244] (II) NOUVEAU(0): EDID for output VGA-1
[ 8.244] (II) NOUVEAU(0): Manufacturer: ACR Model: ada8 Serial#: 1937803344
[ 8.244] (II) NOUVEAU(0): Year: 2007 Week: 38
[ 8.244] (II) NOUVEAU(0): EDID Version: 1.3
[ 8.244] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 8.244] (II) NOUVEAU(0): Sync: Separate Composite
[ 8.244] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 37 vert.: 23
[ 8.245] (II) NOUVEAU(0): Gamma: 2.20
[ 8.245] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 8.245] (II) NOUVEAU(0): Default color space is primary color space
[ 8.245] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 8.245] (II) NOUVEAU(0): redX: 0.590 redY: 0.349 greenX: 0.328 greenY: 0.547
[ 8.245] (II) NOUVEAU(0): blueX: 0.155 blueY: 0.138 whiteX: 0.313 whiteY: 0.329
[ 8.245] (II) NOUVEAU(0): Supported established timings:
[ 8.245] (II) NOUVEAU(0): 720x400@70Hz
[ 8.245] (II) NOUVEAU(0): 640x480@60Hz
[ 8.245] (II) NOUVEAU(0): 640x480@67Hz
[ 8.245] (II) NOUVEAU(0): 640x480@72Hz
[ 8.245] (II) NOUVEAU(0): 640x480@75Hz
[ 8.245] (II) NOUVEAU(0): 800x600@56Hz
[ 8.245] (II) NOUVEAU(0): 800x600@60Hz
[ 8.245] (II) NOUVEAU(0): 800x600@72Hz
[ 8.245] (II) NOUVEAU(0): 800x600@75Hz
[ 8.245] (II) NOUVEAU(0): 832x624@75Hz
[ 8.245] (II) NOUVEAU(0): 1024x768@60Hz
[ 8.245] (II) NOUVEAU(0): 1024x768@70Hz
[ 8.245] (II) NOUVEAU(0): 1024x768@75Hz
[ 8.245] (II) NOUVEAU(0): 1152x864@75Hz
[ 8.245] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 8.245] (II) NOUVEAU(0): Supported standard timings:
[ 8.245] (II) NOUVEAU(0): #0: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 8.245] (II) NOUVEAU(0): #1: hsize: 1280 vsize 800 refresh: 75 vid: 3969
[ 8.245] (II) NOUVEAU(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 8.245] (II) NOUVEAU(0): #3: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 8.245] (II) NOUVEAU(0): Supported detailed timing:
[ 8.245] (II) NOUVEAU(0): clock: 106.5 MHz Image Size: 367 x 229 mm
[ 8.245] (II) NOUVEAU(0): h_active: 1440 h_sync: 1520 h_sync_end 1672 h_blank_end 1904 h_border: 0
[ 8.245] (II) NOUVEAU(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 934 v_border: 0
[ 8.245] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 215 MHz
[ 8.245] (II) NOUVEAU(0): Monitor name: Acer AL1716W
[ 8.245] (II) NOUVEAU(0): Serial No: LA8040344303
[ 8.245] (II) NOUVEAU(0): EDID (in hex):
[ 8.245] (II) NOUVEAU(0): 00ffffffffffff000472a8ad50888073
[ 8.245] (II) NOUVEAU(0): 261101036c251778ee10d59759548c27
[ 8.246] (II) NOUVEAU(0): 235054bfee8081c0810f9500950f0101
[ 8.246] (II) NOUVEAU(0): 0101010101019a29a0d0518422305098
[ 8.246] (II) NOUVEAU(0): 36006fe510000006000000fd00384c1f
[ 8.246] (II) NOUVEAU(0): 5315000a202020202020000000fc0041
[ 8.246] (II) NOUVEAU(0): 63657220414c31373136570a000000ff
[ 8.246] (II) NOUVEAU(0): 004c41383034303334343330330a00aa
[ 8.246] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[ 8.246] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 +hsync +vsync (55.9 kHz eP)
[ 8.246] (II) NOUVEAU(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 8.246] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752I got again a total system freeze today when I wanted to launch firefox using only the openbox menu, without wbar running.
So I decided to try now the 'nouveau.noaccel=1' kernel command line parameter, and to use again wbar for my frequently used applis.
In the Xorg log, the differences are:
without 'nouveau.noaccel=1'
[ 30.761] (II) UnloadModule: "nv"
[ 30.761] (II) Unloading nv
[ 30.761] (--) Depth 24 pixmap format is 32 bpp
[ 30.762] (II) NOUVEAU(0): Opened GPU channel 0
[ 30.765] (II) NOUVEAU(0): [DRI2] Setup complete
[ 30.765] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 30.765] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 30.776] (II) EXA(0): Driver allocated offscreen pixmaps
[ 30.777] (II) EXA(0): Driver registered support for the following operations:
[ 30.777] (II) Solid
[ 30.777] (II) Copy
[ 30.777] (II) Composite (RENDER acceleration)
[ 30.777] (II) UploadToScreen
[ 30.777] (II) DownloadFromScreen
[ 30.777] (==) NOUVEAU(0): Backing store disabled
[ 30.777] (==) NOUVEAU(0): Silken mouse enabled
with 'nouveau.noaccel=1'
[ 1191.621] (II) UnloadModule: "nv"
[ 1191.621] (II) Unloading nv
[ 1191.621] (--) Depth 24 pixmap format is 32 bpp
[ 1191.621] (EE) NOUVEAU(0): Error creating GPU channel: -19
[ 1191.621] (EE) NOUVEAU(0): Error initialising acceleration. Falling back to NoAccel
[ 1191.621] (==) NOUVEAU(0): Backing store disabled
[ 1191.621] (==) NOUVEAU(0): Silken mouse enabled
[ 1191.621] (==) NOUVEAU(0): DPMS enabled
So now 3D acceleration is disabled.
I will see now if the system is stable enough for my daily usage and gives satisfactory performances.
I am almost sure that the mesa nouveau dri driver is the cause of the freezes.
Last edited by berbae (2013-03-27 10:07:42) -
Has anyone got iSight working when a firewire drive is connected?
I have tried numerous drives but they all stop iSight working. For sure I would not have bought it had I known this. It will work if I disconnect all drives. Irony is that the internal is so slow that I run off a firewire.
I have had problems with connecting an external firewire hard drive and isight camera at the same time. I have problems copying or reading files off my hard drive when my isight camera is connected at the same time. Just the other day, I forgot to disconnect my isight camera when I hooked up my external hard drive to view some old family photos that I scanned in and saved to that hard drive months ago. I kept getting a message that the files could not be read and had an error message. I thought that I had lost all the photos or had not scanned them properly or that my hard drive was going bad. Luckily I remembered that there is a firewire problem when my isight is connected and I disconnected the camera and was able to open the files. It would be nice if Apple could address this problem. I also have problems copying files to my idisk on occassion when my isight camera is connected. It tends to be slow and sometimes the wheel spins for a very long time. Also have noticed that when I copy large number of files at one time to a CD that things seem to never work right. I have learned to copy files in smaller lots and this seems to help.
I love my isight camera and it is so much better than my ibot camera, but wish they could fix the issues with the firewire.
-Joan
PowerBook G4 Mac OS X (10.4.2) -
TS3742 Kernel Panic/System Restart when disconnecting thunderbolt drive
I have isolated the kernel panic to the connected thunderbolt devices. More specifically, every time I disconnect an external thunderbolt drive, there is a kernel panic and the system restarts. Any ideas?
Hardware Overview:
Model Name: Mac Pro
Model Identifier: MacPro6,1
Processor Name: 6-Core Intel Xeon E5
Processor Speed: 3.5 GHz
Number of Processors: 1
Total Number of Cores: 6
L2 Cache (per Core): 256 KB
L3 Cache: 12 MB
Memory: 32 GB
Yosemite 10.10.2Are you ejecting the device before disconnecting it? If not, then you need to.
-
System freeze when using catalyst driver and xorg 1.16
As the title says, my computer freezes up when using the catalyst drivers. This happens even when I haven't run startx (happens even when I ssh). Typically I would check my syslog after a crash, right? However, I don't see a syslog in /var/log. How would I go about troubleshooting this?
EDIT:
Okay I discovered journalctl . I ran journalctl --since=today and the point in time at which my computer froze and had to be rebooted was blank. Here is the relevant part of the log...
Feb 26 21:56:47 kodi systemd[554]: Starting Default.
Feb 26 21:56:47 kodi systemd[554]: Reached target Default.
Feb 26 21:56:47 kodi systemd[554]: Startup finished in 11ms.
-- Reboot --
Feb 26 22:04:36 kodi systemd-journal[141]: Runtime journal is using 8.0M (max allowed 84.6M, trying to leave 127.0M free of 838.9M available → current limit 8
Feb 26 22:04:36 kodi systemd-journal[141]: Permanent journal is using 64.0M (max allowed 2.7G, trying to leave 4.0G free of 22.3G available → current limit 2.
Feb 26 22:04:36 kodi systemd-journal[141]: Time spent on flushing to /var is 1.152ms for 2 entries.
My computer froze at about 22:03. That portion is missing from the log so I have no way of knowing what caused the freeze.
EDIT2:
I should also mention that I recently upgraded so I'm running kernel 3.18.6-1-ARCH. Will the catalyst drivers work with this kernel? I did not have a problem with the old kernel, which I think was 3.16
Last edited by necbot (2015-02-27 02:34:49)necbot wrote:I should also mention that I recently upgraded so I'm running kernel 3.18.6-1-ARCH. Will the catalyst drivers work with this kernel? I did not have a problem with the old kernel, which I think was 3.16
First of all - I'm AMD APU user but I've not used Catalyst for a long time, then please be carefull with my opinion. When we can read on Release note, the latest Catalyst driver works with:
- Xorg/Xserver 7.4 and above (up to 1.16)
- Linux kernel 2.6 or above (up to 3.17)
- glibc version 2.2 or 2.3
- POSIX Shared Memory (/dev/shm) support is required for 3D applications
see: http://support.amd.com/en-us/kb-article … Notes.aspx but on AUR we can read, that this driver is for linux < 3.19 (then kernel 3.18 is supported). This is possible because lano1106_fglrx-13.8_proc.patch but, of course, it's not official, upstream patch. From the other hand, I know that Ubuntu's users has seriously problem with Catalyst on Xorg 1.16. -
Can firewire drives in series sometimes cause system failure?
We have had problems with a 2007 iMac (23") locking up at times. We have AppleCare, and have run numerous tests to try to elucidate the problem.
After the Apple service center here could not find any problem during several days of testing, we've been doing some testing back in our office. Here's what we seemed to have discovered:
Problems SOMETIMES seem to arise when two firewire drives are connected in series to the firewire 800 port. One is a LaCie d2 Big Disk USB 2.0 & FireWire 800 , the other is an OWC Mercury Elite Firewire 800 Pro. Our normal way of running these has been with the LaCie as the outermost of the two. We discovered that we seem to be free of problems if the order is reversed and the LaCie is off, though she can also run for (at least) a while with the LaCie on, as well.
I'm theorizing that our problems may be related to one of two things:
1) Conflict between the way the two drives, and the iMac, implement the firewire 800 standard.
2) Startup problems when the firewire drives are turned on more-or-less simultaneously. One drive could be in a state where its interface is transitioning from "pass through" (drive off) stage to the "active" (drive on) state.
My question is this: Is anyone aware of any problem like this? Is it understandable that such a problem could affect the system enough to even freeze up the system?Sure external devices can cause issues with your Mac if it's causing some kind of hardware problem with the Firewire bus-- drawing too much power, over or under voltage etc.. Some iMacs just have problems with the FW ports themselves. Sometime resetting the SMC will fix it: http://support.apple.com/kb/HT1543?viewlocale=en_US
I have two FW800 drives from OWC daisy chained and I have not had any issues at all. I would try and isolate the two drives if possible to see if the problem persists. Disconnect one of the drives for a few days and use just one drive. Then switch and connect only the other drive for a few days. Then maybe try one of them on FW800 and the other on USB. The FW400 and 800 share the same bus so it may not be any differnt testing one on each if it ends up being a power issue. I wouldn't think it's a power issue though because the external drives have their own power and should not be drawing any power from the computer. But you never know
George -
would love any info that might help.
i have three 250gb firewire drives dasiychained to my computer, and today i changed my ownership and permissions so that other users on the computer could not access those drives. i then restarted after installing the new java update, and none of the firewire drives will mount to the desktop. they're all there in disk utility and i can mount/unmount and eject them, hearing them spinning up and down as they should, so i know they're not physically damaged, but why cant i see them anymore?You wrote: "everytime i tried to change anything it gave me an error code -60002, which i cant find any documentation on"That's a rare error code. A Google search finds exactly two references, both to the same post on another forum and without a solution.
I suspect you can't fix this while logged in as root because the immutable flag is set on the drives. If you log in as root and look at the Get Info window for the drives in question, suspect "Locked" will be checked in the top (General) panel and you can't change that. Correct?
You're going to have to start up in start up in single user mode to fix this. I'm trying to put together some instructions for you but it would first help to know how the system is seeing the FireWire drives.
From your Admin account or in root, type the following command in Terminal:
ls -alh /Volumes
then press Return.
If that command does not list your FireWire drives when used from your Admin account, try the command.
sudo ls -alh /Volumes
then press Return. Type your Admin password when prompted, then press Return.
The command above should list all mounted volumes. It should give you an output similar to the following:<pre>total 24
drwxrwxrwt 11 root admin 374B May 2 05:08 .
drwxrwxr-t 35 root admin 1K May 1 15:48 ..
-rw-rw-rw- 1 drsmoke admin 6K Feb 2 05:43 .DS_Store
drwxr-xr-x 20 drsmoke staff 714B Dec 2 17:38 Backup Sets
lrwxr-xr-x 1 root admin 1B May 1 15:49 Macintosh HD -> /
drwxrwxrwx 17 drsmoke staff 680B May 1 15:47 Our Work
drwxrwxrwx 15 drsmoke staff 544B Mar 17 17:56 Our Work Duplicate
drwxrwxrwx 31 drsmoke staff 1K Apr 26 00:47 Spare
drwxrwxr-t 34 root admin 1K May 1 15:26 Tiger1
drwxrwxr-t 31 root admin 1K Apr 4 14:33 Tiger2
drwxrwxr-t 35 root admin 1K Apr 15 18:55 iBook</pre>Copy and paste the output into a reply here, being sure to note the following in your response:
• Specify which drives/volumes are the FireWire drives or volumes. The drive/volume names are shown in the last column in the sample output above.
• If your FireWire drives are partitioned into more than one partition per drive, please also note that.
• Likewise if any of the FireWire drives or partitions are supposed to be bootable, please also specify which ones.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X -
Loud electronic screeching noise when ejecting CD
I was copying CDs to iTunes using the "Import Songs and Eject" feature (iTunes > Preferences > Advanced > Importing, set "On CD insert" to "Import Songs and Eject"). When ejecting the drive occasionally makes a loud electronic screeching noise. Is there something wrong with my drive or is this normal?
Thanks in advance,
cmy
MacBook Pro Mac OS X (10.4.5)
MacBook Pro Mac OS X (10.4.5)
MacBook Pro Mac OS X (10.4.5)
MacBook Pro Mac OS X (10.4.5)Are you sure it is electronic? I looked at my MBP and it seems like the flaps they have covering the drive are just a little too long and rigid and make a screeching sound when ejecting a disc.
I would pop in a disk, without using iTunes, and then eject it and listen to if the noise is coming from the flap on the drive or somewhere else.
Maybe you are looking for
-
How do I deal with missing pixel-widths?
I apologize if this is the wrong forum. I am currently writing a GUI in swing, and I seem to be having some sort of a pixel mismatch problem. There are two verifiable symptoms so far. I have a BufferedImage that is intended to serve as a ribbon acros
-
Can I move an iPhoto book to another iPhoto library (which contain the photo's used for the book)
I have imported a lot of photos from a travel from friends in my iPhoto library. I created and ordered a beautiful book for them, but I do want to get rid of all the photo;s from my library. So I have used iPhoto Library Manager to create a library f
-
Editable region with ecommerce
Can client without dreamweaver update content in an editable region containing Paypal ecommerce buttons? My client wants to be able to update region with seasonal item photo and add to cart button.
-
Error in the PC editor. Continue with the line editor. Word 2010
We have just completed upgrade to ECC6.0 eph4. We are evaluating new workstion build to depoly windows 7 and office 2010. We are installing SAP GUI 7.2 patch 1 on the workstations. While testing the build, we are finding that when creating/changing
-
CS4 et ma palette graphique trust
bonjour j'ai un petit soucis avec ma palette graphique une Trust TB 6300 (je sais on va me dire que c'est de la me... que rien ne vaut une wacum, mais mon banquier pense autrement et pour mon usage c'est suffisant ;-) ) le problème à l'ouverture d'un