System has stopped responding
Hi all,
I am loading data from R3 to BW.
Monitor shows the following Status:
Request still running
Diagnosis
No errors found. The current process has probably not finished yet.
System Response
The ALE inbox of BI is identical to the ALE outbox of the source system
or
the maximum wait time for this request has not yet been exceeded
or
the background job has not yet finished in the source system.
Current status
Data packets were found that have not yet been read
Runtime is close to 6 hours now. I will appreciate your expert suggestion.
Regards,
Saurav
Hi Sourav,
As you have mentioned that the job has finished in source system, please check in WE02 in source system to see if any idocs outbound to BI system are in yellow/ red status. If any idoc is in yellow status, go to BD87 and process this idoc. If the idoc is in red status, check for the error reason.
If everything is fine in WE02, then go to SM58 in source system to check if any entries are there. If you find any entry, process them manually by executing them.
Finally, if everything is fine in source system, check in BI system in WE02 to see if all the inbound idocs are in green status. If different, please follow the same procedure as mentioned above.
Similar Messages
-
Rundll32.exe has stopped responding
When I install Ghost v14 on the T500, after reboot the DVD drive has a yellow exclamation mark on it with "the device is not responding properly" and an error pops up with "rundll32.exe has stopped responding", and also the power Manager icon on the task bar stops showing.
I can correct the problem with the DVD drive by removing an entry in the registry but the rundll32.exe error will never go away.
When I uninstall Ghost, all works fine, and then the error goes away, odd!
Has a anyone experienced this with Ghost and know why it causes these problems, with the DVD drive, Power Manager and the rundll.exe error?
Log Name: Application
Source: Application Error
Date: 17/01/2009 22:33:25
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: 208252G
Description:
Faulting application rundll32.exe, version 6.0.6000.16386, time stamp 0x4549bb52, faulting module ntdll.dll, version 6.0.6001.18000, time stamp 0x4791adec, exception code 0xc015000f, fault offset 0x00000000000603f1, process id 0x1c0, application start time 0x01c978f39520fc13.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2009-01-17T22:33:25.000Z" />
<EventRecordID>4097</EventRecordID>
<Channel>Application</Channel>
<Computer>ST-208252GAEM4T</Computer>
<Security />
</System>
<EventData>
<Data>rundll32.exe</Data>
<Data>6.0.6000.16386</Data>
<Data>4549bb52</Data>
<Data>ntdll.dll</Data>
<Data>6.0.6001.18000</Data>
<Data>4791adec</Data>
<Data>c015000f</Data>
<Data>00000000000603f1</Data>
<Data>1c0</Data>
<Data>01c978f39520fc13</Data>
</EventData>
</Event>
Any help would be greatly appreciated.
Thanks
S
Message Edited by styoda on 01-18-2009 03:29 AM
Message Edited by styoda on 01-18-2009 03:30 AMAnyone installed Ghost v14 on their T500?
-
I have tried every thing suggested i this forum about fixing this. The message I get is that iTunes has stopped responding, Windows is looking for a solution to the problem. Then it wants to close iTunes. This only happens when i try to access the store. My music and podcasts and everything else works fine. Just can't go to the store. Just downloaded the lates and greates version of iTunes. Below is the error i get in the event viewer and of course windows Tech support is no help. Never ever had an error in the event viewer had a solution to a problem of any kind.
Log Name: Application
Source: Application Error
Date: 11/16/2013 9:40:19 AM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: ols2
Description:
Faulting application name: iTunes.exe, version: 11.1.3.8, time stamp: 0x5274a87d
Faulting module name: KERNELBASE.dll, version: 6.3.9600.16408, time stamp: 0x523d4548
Exception code: 0xc06d007e
Fault offset: 0x00012eec
Faulting process id: 0x1a54
Faulting application start time: 0x01cee2ea6a23adb3
Faulting application path: C:\Program Files (x86)\iTunes\iTunes.exe
Faulting module path: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
Report Id: c6cbdcc6-4edd-11e3-bee7-606c6697e8b0
Faulting package full name:
Faulting package-relative application ID:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-11-16T16:40:19.000000000Z" />
<EventRecordID>73904</EventRecordID>
<Channel>Application</Channel>
<Computer>ols2</Computer>
<Security />
</System>
<EventData>
<Data>iTunes.exe</Data>
<Data>11.1.3.8</Data>
<Data>5274a87d</Data>
<Data>KERNELBASE.dll</Data>
<Data>6.3.9600.16408</Data>
<Data>523d4548</Data>
<Data>c06d007e</Data>
<Data>00012eec</Data>
<Data>1a54</Data>
<Data>01cee2ea6a23adb3</Data>
<Data>C:\Program Files (x86)\iTunes\iTunes.exe</Data>
<Data>C:\WINDOWS\SYSTEM32\KERNELBASE.dll</Data>
<Data>c6cbdcc6-4edd-11e3-bee7-606c6697e8b0</Data>
<Data>
</Data>
<Data>
</Data>
</EventData>
</Event>See the following post for how to resolve. The fix involves copying a file from one directory to another. Very easy.
https://discussions.apple.com/message/24271500#24271500 -
When I try to do a system defrag or other maintenance - I get a box up with a green line that states HPASL has stopped responding. I am unable to perform maintenance or defrag. Can someone tell me why this is happening and how to solve it! Thank you!!!! I'm using Windows 7 64 bit
@MADUNV1,
What is the exact model of the unit?
Are you launching defrag through HP Support Assistant or by going to Start>All Programs>Accessories>System Tools? It would seem that HPASL is for HP Active Support Library, but the only downloads I can find for it are for Vista and not Windows 7.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
"iCloud has stopped responding" when logging in safari
ICloud work fine on my mac but when I try to log in in safari I receive the following error: iCloud has stopped responding:
Thanks
SteortHi Steort,
Welcome to Apple Support Communities!
The article linked below provides a lot of great suggestions that should be able to resolve the issue.
iCloud: Troubleshooting web browser issues with iCloud.com
http://support.apple.com/kb/ts4050
Symptoms
When using iCloud.com, you may experience issues such as a web page not loading, or the web browser displaying distorted or outdated content. Learn more about troubleshooting these types of issues.
Resolution
Use a supported web browser
For the best web experience with iCloud.com, make sure you're using a supported web browser. For more information about iCloud system requirements, see this article.
Enable cookies and JavaScript
Cookies and JavaScript need to be enabled in order to properly access iCloud web services. If you're not sure whether you have Cookies or Javascript enabled, visit iCloud.com. If you're missing either Cookies or JavaScript support, iCloud web pages will provide an alert. If you're unclear on how to enable Cookies or JavaScript, refer to the Help menu for your browser.
Troubleshooting the cache
Most web browsers use a feature called "caching" to display frequently used information, images, and web resources. Caching stores or "caches" this information on your computer, so your computer doesn't have to download the same information every time it visits the same webpage. Caching makes subsequent visits to the same website or webpage faster.
If a website or webpage has been updated since your last visit, your browser sees the update and then loads the new content instead of the old cached content. In some cases, this doesn't work as expected and your browser displays the old information instead.
Expand All | Collapse All
Follow the instructions below for clearing your web browser's cache in Safari, Firefox, and Google Chrome on a Mac; or Firefox, Internet Explorer, and Google Chrome on a Windows PC.
To clear Safari's cache on a Mac (Safari 6.0 and later)
Close any open Safari windows.
Choose Safari > Preferences > Advanced.
Select the checkbox labeled "Show Develop menu in menu bar".
Close the Advanced window.
From the Safari menu bar, choose Develop > Empty Caches.
-Jason -
Hi,
i got the below error message in /var/adm/messages
rmclomv: [ID 647266 kern.warning] WARNING: SC has stopped responding
Can Anybody explain the error..
Thanks and Regards
sureshCheck whether the system controller(SC), otherwise known as the Advanced Lights-Out Management interface(ALOM), is accessible using an external connection, rather than from within the operating system. This is to test whether the SC is still alive, regardless of whether there is Solaris access to SC.
To conduct this verification, you must connect to the SC via the serial management port, to confirm whether the SC is responsive. Take note that
connecting to the SC via the Ethernet port (network management port) will depend on whether the SC's Ethernet port has been previously configured to accept
incoming connections. If the SC's Ethernet port is not configured, access to the SC will not be available via the Ethernet.
When a connection has been gained to the SC, there might not be any output. This is normal because the SC default behavior(setting), is to time-out console
redirection within 60 seconds of being booted or reset.
Enter the escape sequence "#." to gain access to the SC prompt "sc> " or a "login:" request by the SC.
If no response is seen from the SC after keying in the escape sequence "#."
or even after a power cycle, consider replacing the SC.
However, if you are able to access the system controller externally, then you might be experiencing Bug.
Bug ID: 5017681
"su driver unloading causes loss of connection from Solaris to ALOM"
Work Around:
You can manually load the driver again using the "modload su"command from Solaris. This is only temporary as Solaris may unload su again later.
Add the line following line to /etc/system and reboot:
forceload: drv/su
This should assist in preventing "su" from unloading.
------------------------------------------ -
ICloud has stopped responding.
Hello
When I try to log in into iCloud I get always the same error: iCloud has stopped responding.
In the web console there is an error about a bad request.
Failed to load resource: https://setup.icloud.com/setup/ws/1/validate?clientBuildNumber=14FPlus30&clientId=
the server responded with a status of 421 (Bad Request)ERROR
URI error
FILE
https://www.icloud.com/
LINE
164
EXCEPTION INFO
column: 69
STACK
decodeURIComponent@[native code]
send@https://www.icloud.com/:164:69
invokeTransport@https://www.icloud.com/system/cloudos/14FPlus30/en-us/javascript-packed.js:499:1071
fire@https://www.icloud.com/system/cloudos/14FPlus30/en-us/javascript-packed.js:498:1596
fireRequestIfNeeded@https://www.icloud.com/system/cloudos/14FPlus30/en-us/javascript-packed.js:509:1242
sendRequest@https://www.icloud.com/system/cloudos/14FPlus30/en-us/javascript-packed.js:509:652
send@https://www.icloud.com/system/cloudos/14FPlus30/en-us/javascript-packed.js:505:667
loginUser@https://www.icloud.com/system/cloudos/14FPlus30/en-us/javascript-packed.js:698:1397
userDidSubmit@https://www.icloud.com/system/cloudos/14FPlus30/en-us/javascript-packed.js:727:1115
tryToHandleEvent@https://www.icloud.com/system/cloudos/14FPlus30/en-us/javascript-packed.js:414:326
sendEvent@https://www.icloud.com/system/cloudos/14FPlus30/en-us/javascript-packed.js:422:934
performSubmit
attemptSubmit
action
_runAction@https://www.icloud.com/system/cloudos/14FPlus30/en-us/javascript-packed.js:335:1436
_action@https://www.icloud.com/system/cloudos/14FPlus30/en-us/javascript-packed.js:335:1300
mouseUp@https://www.icloud.com/system/cloudos/14FPlus30/en-us/javascript-packed.js:334:1444
tryToPerform@https://www.icloud.com/system/cloudos/14FPlus30/en-us/javascript-packed.js:135:1202
sendEvent@https://www.icloud.com/system/cloudos/14FPlus30/en-us/javascript-packed.js:211:339
https://www.icloud.com/system/cloudos/14FPlus30/en-us/javascript-packed.js:222:663
run@https://www.icloud.com/system/cloudos/14FPlus30/en-us/javascript-packed.js:156:138
sendEvent@https://www.icloud.com/system/cloudos/14FPlus30/en-us/javascript-packed.js:222:552
mouseup@https://www.icloud.com/system/cloudos/14FPlus30/en-us/javascript-packed.js:230:493
handle@https://www.icloud.com/system/cloudos/14FPlus30/en-us/javascript-packed.js:176:527
https://www.icloud.com/system/cloudos/14FPlus30/en-us/javascript-packed.js:177:467
MOST RECENT STACK
SC.run
> args: function () {n?r=n.get("pane"):r=this.get("menuPane")||this.get("keyPane")||this.get("mainPane"),i=r?r.sendEvent(e,t,n):null;}, SC.RootResponder:sc965, undefined, undefined, undefined
SC.RootResponder#sendEvent
> args: mouseUp, [object Object], SC.ImageButtonView:sc1908, undefined, undefined
SC.RootResponder#mouseup
> args: [object Object], undefined, undefined, undefined, undefined
function (e) {if(typeof SC=="undefined"||SC.Event.triggered)return YES;var t,n,r,i,s,o,u,a,f,l;o=SC.A(arguments),o[0]=e=SC.Event.normalizeEvent(e||win
> args: [object Object], undefined, undefined, undefined, undefined
function () {return SC.Event.handle.apply(SC.Event._elements[s],arguments);}
> args: [object MouseEvent], undefined, undefined, undefined, undefined
IS FATAL
true
TYPE
client
APPLICATION NAME
cloudos
APP STATECHART
SC.Statechart:sc933
initialized: true
name: cloudos-statechart
current-states: [
active.authUI.fieldsEditable
state-transition:
active: false
suspended: false
handling-event:
state: active.authUI.fieldsEditable
event: userDidSubmit
handler: userDidSubmit
BUILD NUMBER
14FPlus30
TIME
Mon Oct 06 2014 09:09:05 GMT+0200 (CEST) (1412579345018)
HOST
www.icloud.com
USER AGENT
Mozilla/5.0 (Macintosh; Intel Mac OS X 10_9_5) AppleWebKit/600.1.17 (KHTML, like Gecko) Version/7.1 Safari/537.85.10
ENVIRONMENT
PROD
RECENT LOG MESSAGES
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: SC.Module: Attempting to load 'cloudos_foundation/springboard'
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: SC.Module: Module 'cloudos_foundation/springboard' already loaded.
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: SC.Module: Evaluating JavaScript for module 'cloudos_foundation/springboard'.
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: CloudOS.main() missing localized strings, waiting for them...
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: SC.Module: Module 'cloudos_foundation/springboard' has completed loading, invoking callbacks.
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: Got localized strings back AFTER app is loaded and CloudOS.main() has run. Running CloudOS.run() now, because CloudOS.localeDidLoad changed from false to true
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: Loading localized strings and metrics
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: --> Request 1: GET to /applications/pages/current/info.json, headers: Content-Type=text/plain, body: (omitted)
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: --> Request 2: GET to /applications/numbers/current/info.json, headers: Content-Type=text/plain, body: (omitted)
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: --> Request 3: GET to /applications/keynote/current/info.json, headers: Content-Type=text/plain, body: (omitted)
Mon, 06 Oct 2014 07:02:37 GMT: INFO: SC.Statechart<cloudos-statechart, sc933>: BEGIN initialize statechart
Mon, 06 Oct 2014 07:02:37 GMT: INFO: SC.Statechart<cloudos-statechart, sc933>: BEGIN gotoState: __ROOT_STATE__
Mon, 06 Oct 2014 07:02:37 GMT: INFO: SC.Statechart<cloudos-statechart, sc933>: starting from current state: ---
Mon, 06 Oct 2014 07:02:37 GMT: INFO: SC.Statechart<cloudos-statechart, sc933>: current states before: ---
Mon, 06 Oct 2014 07:02:37 GMT: INFO: SC.Statechart<cloudos-statechart, sc933>: --> entering state: __ROOT_STATE__
Mon, 06 Oct 2014 07:02:37 GMT: INFO: SC.Statechart<cloudos-statechart, sc933>: --> entering state: loading
Mon, 06 Oct 2014 07:02:37 GMT: INFO: SC.Statechart<cloudos-statechart, sc933>: current states after: loading
Mon, 06 Oct 2014 07:02:37 GMT: INFO: SC.Statechart<cloudos-statechart, sc933>: END gotoState: __ROOT_STATE__
Mon, 06 Oct 2014 07:02:37 GMT: INFO: SC.Statechart<cloudos-statechart, sc933>: BEGIN gotoState: validatingAuth
Mon, 06 Oct 2014 07:02:37 GMT: INFO: SC.Statechart<cloudos-statechart, sc933>: starting from current state: loading
Mon, 06 Oct 2014 07:02:37 GMT: INFO: SC.Statechart<cloudos-statechart, sc933>: current states before: loading
Mon, 06 Oct 2014 07:02:37 GMT: INFO: SC.Statechart<cloudos-statechart, sc933>: pivot state = __ROOT_STATE__
Mon, 06 Oct 2014 07:02:37 GMT: INFO: SC.Statechart<cloudos-statechart, sc933>: <-- exiting state: loading
Mon, 06 Oct 2014 07:02:37 GMT: INFO: SC.Statechart<cloudos-statechart, sc933>: --> entering state: validatingAuth
Mon, 06 Oct 2014 07:02:37 GMT: INFO: SC.Statechart<cloudos-statechart, sc933>: --> entering state: validatingAuth.gettingReply
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: COS: Sending validate POST request to https://setup.icloud.com/setup/ws/1/validate
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: --> Request 4: POST to https://setup.icloud.com/setup/ws/1/validate?clientBuildNumber=14FPlus30&clientId=0F0175B1-FFE0-485C-84C5-4396BA2C00A4, headers: Content-Type=text/plain, body: (omitted)
Mon, 06 Oct 2014 07:02:37 GMT: INFO: SC.Statechart<cloudos-statechart, sc933>: current states after: validatingAuth.gettingReply
Mon, 06 Oct 2014 07:02:37 GMT: INFO: SC.Statechart<cloudos-statechart, sc933>: END gotoState: validatingAuth
Mon, 06 Oct 2014 07:02:37 GMT: INFO: SC.Statechart<cloudos-statechart, sc933>: END initialize statechart
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: Language check for CloudOS: null -> en-us. We WILL relocalize cloudOS.
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: Language check for app 'mail': null -> en-us. We WILL relocalize 'mail.'
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: Language check for app 'contacts': null -> en-us. We WILL relocalize 'contacts.'
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: Language check for app 'calendar': null -> en-us. We WILL relocalize 'calendar.'
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: Language check for app 'notes': null -> en-us. We WILL relocalize 'notes.'
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: Language check for app 'reminders': null -> en-us. We WILL relocalize 'reminders.'
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: Language check for app 'find': null -> en-us. We WILL relocalize 'find.'
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: Language check for app 'iclouddrive': null -> en-us. We WILL relocalize 'iclouddrive.'
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: Language check for app 'settings': null -> en-us. We WILL relocalize 'settings.'
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: Language check for app 'documentsdev': null -> en-us. We WILL relocalize 'documentsdev.'
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: <-- Response 3: 200 (133ms), headers: Accept-Ranges=bytes, Cache-Control=no-cache, no-store, private, Connection=keep-alive, Content-Encoding=gzip, Content-Language=en-us, Content-Length=349, Content-Type=application/json, Date=Mon, 06 Oct 2014 07:02:37 GMT, ETag="2c0-503a9fa76cf80", Expires=Tue, 06 Oct 2015 07:02:37 GMT, Last-Modified=Mon, 22 Sep 2014 16:31:10 GMT, Server=Apache, Strict-Transport-Security=max-age=31536000; includeSubDomains, Vary=Accept-Encoding body: (omitted)
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: Adding additional data for keynote
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: Springboard: A wait condition became satisfied. Still waiting on 3 conditions. Requirement was: dynamic app keynote
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: <-- Response 1: 200 (149ms), headers: Accept-Ranges=bytes, Cache-Control=no-cache, no-store, private, Connection=keep-alive, Content-Encoding=gzip, Content-Language=en-us, Content-Length=349, Content-Type=application/json, Date=Mon, 06 Oct 2014 07:02:37 GMT, ETag="2be-503a9fa76cf80", Expires=Tue, 06 Oct 2015 07:02:37 GMT, Last-Modified=Mon, 22 Sep 2014 16:31:10 GMT, Server=Apache, Strict-Transport-Security=max-age=31536000; includeSubDomains, Vary=Accept-Encoding body: (omitted)
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: Adding additional data for pages
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: Springboard: A wait condition became satisfied. Still waiting on 2 conditions. Requirement was: dynamic app pages
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: <-- Response 4: 421 (119ms), headers: Cache-Control=no-cache, no-store, private, Content-Type=application/json; charset=UTF-8 body: {"error":"Missing X-APPLE-WEBAUTH-TOKEN cookie","success":false}
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: COS: invoking validateDidFail
Mon, 06 Oct 2014 07:02:37 GMT: INFO: SC.Statechart<cloudos-statechart, sc933>: BEGIN sendEvent: 'authDidNotValidate'
Mon, 06 Oct 2014 07:02:37 GMT: INFO: SC.Statechart<cloudos-statechart, sc933>: validatingAuth.gettingReply: will handle event 'authDidNotValidate'
Mon, 06 Oct 2014 07:02:37 GMT: INFO: SC.Statechart<cloudos-statechart, sc933>: BEGIN gotoState: active.authUI
Mon, 06 Oct 2014 07:02:37 GMT: INFO: SC.Statechart<cloudos-statechart, sc933>: starting from current state: validatingAuth.gettingReply
Mon, 06 Oct 2014 07:02:37 GMT: INFO: SC.Statechart<cloudos-statechart, sc933>: current states before: validatingAuth.gettingReply
Mon, 06 Oct 2014 07:02:37 GMT: INFO: SC.Statechart<cloudos-statechart, sc933>: pivot state = __ROOT_STATE__
Mon, 06 Oct 2014 07:02:37 GMT: INFO: SC.Statechart<cloudos-statechart, sc933>: <-- exiting state: validatingAuth.gettingReply
Mon, 06 Oct 2014 07:02:37 GMT: INFO: SC.Statechart<cloudos-statechart, sc933>: <-- exiting state: validatingAuth
Mon, 06 Oct 2014 07:02:37 GMT: INFO: SC.Statechart<cloudos-statechart, sc933>: --> entering state: active
Mon, 06 Oct 2014 07:02:37 GMT: INFO: SC.Statechart<cloudos-statechart, sc933>: --> entering state: active.authUI
Mon, 06 Oct 2014 07:02:37 GMT: INFO: SC.Statechart<cloudos-statechart, sc933>: --> entering state: active.authUI.downloadingAuthModule
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: SC.Module: Attempting to load 'cloudkit/auth_ui'
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: SC.Module: Module 'cloudkit/auth_ui' is not loaded, loading now.
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: SC.Module: 'cloudkit/auth_ui' depends on 'cloudkit/photo', loading dependency…
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: SC.Module: Attempting to load 'cloudkit/photo'
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: SC.Module: Module 'cloudkit/photo' is not loaded, loading now.
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: SC.Module: Loading JavaScript file in 'cloudkit/photo' -> '/system/cloudos/14FPlus30/cloudkit/photo/14FPlus30/en-us/javascript.js'
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: SC.Module: Loading CSS file in 'cloudkit/auth_ui' -> '/system/cloudos/14FPlus30/cloudkit/auth_ui/14FPlus30/en-us/stylesheet.css'
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: SC.Module: Loading JavaScript file in 'cloudkit/auth_ui' -> '/system/cloudos/14FPlus30/cloudkit/auth_ui/14FPlus30/en-us/javascript-strings.js'
Mon, 06 Oct 2014 07:02:37 GMT: INFO: SC.Statechart<cloudos-statechart, sc933>: current states after: active.authUI.downloadingAuthModule
Mon, 06 Oct 2014 07:02:37 GMT: INFO: SC.Statechart<cloudos-statechart, sc933>: END gotoState: active.authUI
Mon, 06 Oct 2014 07:02:37 GMT: INFO: SC.Statechart<cloudos-statechart, sc933>: END sendEvent: 'authDidNotValidate'
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: SC.Module: Module 'cloudkit/photo' finished loading.
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: SC.Module: Evaluating and invoking callbacks for 'cloudkit/photo'.
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: SC.Module: Module 'cloudkit/photo' has completed loading, invoking callbacks.
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: SC.Module: Module 'cloudkit/auth_ui' finished loading.
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: SC.Module: Evaluating and invoking callbacks for 'cloudkit/auth_ui'.
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: SC.Module: Module 'cloudkit/auth_ui' has completed loading, invoking callbacks.
Mon, 06 Oct 2014 07:02:37 GMT: INFO: SC.Statechart<cloudos-statechart, sc933>: BEGIN gotoState: active.authUI.fieldsEditable
Mon, 06 Oct 2014 07:02:37 GMT: INFO: SC.Statechart<cloudos-statechart, sc933>: starting from current state: active.authUI.downloadingAuthModule
Mon, 06 Oct 2014 07:02:37 GMT: INFO: SC.Statechart<cloudos-statechart, sc933>: current states before: active.authUI.downloadingAuthModule
Mon, 06 Oct 2014 07:02:37 GMT: INFO: SC.Statechart<cloudos-statechart, sc933>: pivot state = active.authUI
Mon, 06 Oct 2014 07:02:37 GMT: INFO: SC.Statechart<cloudos-statechart, sc933>: <-- exiting state: active.authUI.downloadingAuthModule
Mon, 06 Oct 2014 07:02:37 GMT: INFO: SC.Statechart<cloudos-statechart, sc933>: --> entering state: active.authUI.fieldsEditable
Mon, 06 Oct 2014 07:02:37 GMT: INFO: SC.Statechart<cloudos-statechart, sc933>: current states after: active.authUI.fieldsEditable
Mon, 06 Oct 2014 07:02:37 GMT: INFO: SC.Statechart<cloudos-statechart, sc933>: END gotoState: active.authUI.fieldsEditable
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: Preloading background images, but every image was already loaded. Running callback immediately.
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: <-- Response 2: 200 (348ms), headers: Accept-Ranges=bytes, Cache-Control=no-cache, no-store, private, Connection=keep-alive, Content-Encoding=gzip, Content-Language=en-us, Content-Length=349, Content-Type=application/json, Date=Mon, 06 Oct 2014 07:02:37 GMT, ETag="2c4-503a9fa76cf80", Expires=Tue, 06 Oct 2015 07:02:37 GMT, Last-Modified=Mon, 22 Sep 2014 16:31:10 GMT, Server=Apache, Strict-Transport-Security=max-age=31536000; includeSubDomains, Vary=Accept-Encoding body: (omitted)
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: Adding additional data for numbers
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: Springboard: A wait condition became satisfied. Still waiting on 1 conditions. Requirement was: dynamic app numbers
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: At long last, SpringboardView is now allowed to generate button instances!
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: Springboard: A wait condition became satisfied. Still waiting on 11 conditions. Requirement was: initial set of buttons
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: Springboard: A wait condition became satisfied. Still waiting on 10 conditions. Requirement was: Button for mail
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: Springboard: A wait condition became satisfied. Still waiting on 9 conditions. Requirement was: Button for contacts
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: Springboard: A wait condition became satisfied. Still waiting on 8 conditions. Requirement was: Button for notes
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: Springboard: A wait condition became satisfied. Still waiting on 7 conditions. Requirement was: Button for reminders
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: Springboard: A wait condition became satisfied. Still waiting on 6 conditions. Requirement was: Button for find
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: Springboard: A wait condition became satisfied. Still waiting on 5 conditions. Requirement was: Button for iclouddrive
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: Springboard: A wait condition became satisfied. Still waiting on 4 conditions. Requirement was: Button for settings
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: Springboard: A wait condition became satisfied. Still waiting on 3 conditions. Requirement was: Button for keynote
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: Springboard: A wait condition became satisfied. Still waiting on 2 conditions. Requirement was: Button for pages
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: Springboard: A wait condition became satisfied. Still waiting on 1 conditions. Requirement was: Button for numbers
Mon, 06 Oct 2014 07:02:37 GMT: DEBUG: Springboard: Springboard View has become ready to show! All of its wait conditions have been satisfied.
Mon, 06 Oct 2014 07:02:41 GMT: DEBUG: SC.Module: Prefetching module 'cloudkit/error_catcher'.
Mon, 06 Oct 2014 07:02:41 GMT: DEBUG: SC.Module: Loading CSS file in 'cloudkit/error_catcher' -> '/system/cloudos/14FPlus30/cloudkit/error_catcher/14FPlus30/en-us/stylesheet.css'
Mon, 06 Oct 2014 07:02:41 GMT: DEBUG: SC.Module: Loading JavaScript file in 'cloudkit/error_catcher' -> '/system/cloudos/14FPlus30/cloudkit/error_catcher/14FPlus30/en-us/javascript-strings.js'
Mon, 06 Oct 2014 07:02:41 GMT: DEBUG: SC.Module: Prefetching module 'cloudos_foundation/language'.
Mon, 06 Oct 2014 07:02:41 GMT: DEBUG: SC.Module: Loading JavaScript file in 'cloudos_foundation/language' -> '/system/cloudos/14FPlus30/cloudos_foundation/language/14FPlus30/en-us/javascript-strings.js'
Mon, 06 Oct 2014 07:02:41 GMT: DEBUG: SC.Module: Prefetching module 'coreweb/date_formatter'.
Mon, 06 Oct 2014 07:02:41 GMT: DEBUG: SC.Module: Loading JavaScript file in 'coreweb/date_formatter' -> '/system/cloudos/14FPlus30/coreweb/date_formatter/14FPlus30/en-us/javascript-strings.js'
Mon, 06 Oct 2014 07:02:41 GMT: DEBUG: SC.Module: Prefetching module 'cloudos_foundation/alarms'.
Mon, 06 Oct 2014 07:02:41 GMT: DEBUG: SC.Module: Loading CSS file in 'cloudos_foundation/alarms' -> '/system/cloudos/14FPlus30/cloudos_foundation/alarms/14FPlus30/en-us/stylesheet.css'
Mon, 06 Oct 2014 07:02:41 GMT: DEBUG: SC.Module: Loading JavaScript file in 'cloudos_foundation/alarms' -> '/system/cloudos/14FPlus30/cloudos_foundation/alarms/14FPlus30/en-us/javascript-strings.js'
Mon, 06 Oct 2014 07:02:41 GMT: DEBUG: SC.Module: Module 'cloudkit/error_catcher' finished loading.
Mon, 06 Oct 2014 07:02:41 GMT: DEBUG: SC.Module: Module 'cloudkit/error_catcher' was prefetched, not evaluating until needed.
Mon, 06 Oct 2014 07:02:41 GMT: DEBUG: SC.Module: Module 'cloudos_foundation/language' finished loading.
Mon, 06 Oct 2014 07:02:41 GMT: DEBUG: SC.Module: Module 'cloudos_foundation/language' was prefetched, not evaluating until needed.
Mon, 06 Oct 2014 07:02:41 GMT: DEBUG: SC.Module: Module 'coreweb/date_formatter' finished loading.
Mon, 06 Oct 2014 07:02:41 GMT: DEBUG: SC.Module: Module 'coreweb/date_formatter' was prefetched, not evaluating until needed.
Mon, 06 Oct 2014 07:02:41 GMT: DEBUG: SC.Module: Module 'cloudos_foundation/alarms' finished loading.
Mon, 06 Oct 2014 07:02:41 GMT: DEBUG: SC.Module: Module 'cloudos_foundation/alarms' was prefetched, not evaluating until needed.
Mon, 06 Oct 2014 07:02:50 GMT: DEBUG: Sending stats to feedbackws
Mon, 06 Oct 2014 07:02:50 GMT: DEBUG: --> Request 5: POST to https://feedbackws.icloud.com/reportStats, headers: Content-Type=text/plain, body: (omitted)
Mon, 06 Oct 2014 07:02:50 GMT: DEBUG: <-- Response 5: 200 (121ms), headers: Cache-Control=no-cache, no-store, private, Content-Type=application/json; charset=UTF-8 body: (omitted)
Mon, 06 Oct 2014 07:02:50 GMT: INFO: Successfully sent stats to feedbackws
Mon, 06 Oct 2014 07:03:29 GMT: DEBUG: CloudOS window received focus event
Mon, 06 Oct 2014 07:03:29 GMT: DEBUG: CloudOS window received focus event
Mon, 06 Oct 2014 07:03:48 GMT: DEBUG: CloudOS window received focus event
Mon, 06 Oct 2014 07:03:48 GMT: DEBUG: CloudOS window received focus event
Mon, 06 Oct 2014 07:08:38 GMT: DEBUG: CloudOS window received focus event
Mon, 06 Oct 2014 07:08:38 GMT: DEBUG: CloudOS window received focus event
Mon, 06 Oct 2014 07:09:04 GMT: INFO: SC.Statechart<cloudos-statechart, sc933>: BEGIN sendEvent: 'userDidSubmit'
Mon, 06 Oct 2014 07:09:04 GMT: INFO: SC.Statechart<cloudos-statechart, sc933>: active.authUI.fieldsEditable: will handle event 'userDidSubmit'
Mon, 06 Oct 2014 07:09:04 GMT: DEBUG: CloudKit: Sending login POST request to https://setup.icloud.com/setup/ws/1/login
Mon, 06 Oct 2014 07:09:05 GMT: INFO: Spent 35 ms symbolicating
Mon, 06 Oct 2014 07:09:05 GMT: DEBUG: CloudKit: ErrorCatcher dialog invoked.
Mon, 06 Oct 2014 07:09:05 GMT: DEBUG: SC.Module: Attempting to load 'cloudkit/error_catcher'
Mon, 06 Oct 2014 07:09:05 GMT: DEBUG: SC.Module: Module 'cloudkit/error_catcher' already loaded.
Mon, 06 Oct 2014 07:09:05 GMT: DEBUG: SC.Module: Evaluating JavaScript for module 'cloudkit/error_catcher'.
Mon, 06 Oct 2014 07:09:05 GMT: DEBUG: SC.Module: Module 'cloudkit/error_catcher' has completed loading, invoking callbacks. -
Preview has stopped responding
preview has stopped responding, menu items will open with right clicking, cannot access preferences, cannot find plist preferences file to delete it, have done repair disk permissions, now at a loss.
JohnPlease read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
As Guest, test. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode.) Post the results of steps 1 and 2. -
Preview has stopped responding to clicks
Preview has stopped responding to clicks and now only scrolling and hotkeys work. I already tried resetting the preferences and restarting. Once in Preview I can't click on any system menus. The only way to switch is using 4-finger swipe to mission control and switching apps. Restarting doesn't fix it. Any ideas?
If the issue is limited to your user account Did have you try try starting up in Safe Mode and test.
(It will take more time to startup in Safe Mode because it runs a directory check.)
If your apps functions correctly that way, go to System Preferences > Users & Groups > Login Items, and remove them. Boot normally and test. If not Copy & paste this is your "Go" menu hold the option key and choose Library
Then go to/Contextual Menu Items and move whatever is there to the Desktop. Then do the same with /Library/Contextual Menu Items. Lastly, moveUsers/yourname/Library/Fonts to your desktop and restarting*
Log out/in or restart, if that sorts it start putting items back one at a time until you find the culprit.
* Use your Finder "Go" menu holding the option key to choose "Library" -
Spaces has stopped responding to control keys
Spaces has stopped responding to the control keys. I tried rebooting, no dice. Checked preferences for spaces: they're OK. Using an apple keyboard, and 2 monitors. It worked till most recent update (Safari 4.0.1). Can still switch, but only by selecting application based switching (no convenient!). Any suggestions gratefully received.
Hi,
Perhaps the control key settings for Spaces got changed somehow. Open System Preferences, then click on the "Expose & Spaces" icon, and click on the "Spaces" tab of the dialog that opens. At the bottom, you will see the current Keyboard and Mouse Shortcuts currently in effect for Spaces. Check that the key sequences are what you expect them to be, and if they have changed, you can reset them to what you want them to be.
Ken -
Display driver has stopped responding and has recovered - Intel HD (Satelite P75-A7200)
I am trying to play minecraft on my Toshiba Satelite P75-A7200 running Windows 10 preview build 10130 . The game starts up ok and I can start playing it but then, anywhere from 10 seconds to 10 minutes later the Minecraft window locks up. It shows a "Display driver has stopped responding and has recovered" error in the lower right of my laptop screen. The Java Platform SE binary process shows as not responding when I open task manager. I have tried updating drivers direct from Intel, The latest would not install onto Windows 10 (Not a valid OS), Changing the Windows TDR timeout in the registry to 8 (no effect), and simply deleting the display devices and file associated with them and allowing the system to add them back. I am out of ideas at this point. Please help.
When I first got my P750, right out of the box I was having the same type of issue you are describing here. Only mine had to do with playing a dvd in the Toshiba DVD player. Regardless, after many attempts to fix the issue, the following shows a method of how I was able to fix it. It may or may not work for you, all I can say is it worked for me.http://forums.toshiba.com/t5/Video-Display/Display-driver-error/m-p/299816 My solution is down near the bottom of page 2 and basically it had to do with Nvidia and Intel driver compatibility. I hope this helps.
-
Display driver has stopped responding but has recovered ....
I have just rebuilt my system which is now
Windows 7 (64 bit)
Photoshop CS4 11.0.1 (64 bit) ( open GL)disabled in preferences)
Core I7 950
graphics card Gianward nividia gtx 285
Photoshop is installed on OCZ vertex SSD
File info on Western digital caviar black
Mother board ASUS rampage gene
I print to 3 printers incuding an Epson 7900
I am not having any problems till it comes to printing my photos ..
When I print to any of the printers with "print preview " enabled I get the message "display driver has stopped responding but has recovered ...."
The Microsoft event ID = 4101
The screen goes black and remains so for a few seconds before it returns ...
Sometimes I am able to get the printer to go ahead and print... sometimes it wont and I have to start the whole print process again..
Needless to say this is irritating ..( by the way this happens with both of my Epson Printers ..the other is an 3880
I have just downloaded the latest drivers for both printers and the latest Nvidia drivers ... the problem remains
The ASUS probe indicates that all teperatures are within an acceptable range..
I would be most gratefull if some one could help with a solution ?It really depends on what drivers windows uses by default for you. On older versions (vista, xp, etc) it would default to Standard VGA driver which is there only for compatibility purposes so it's barely using the video card but if i remember correctly win7 tends to use drivers from ati/nvidia's site for video cards (not the latest version but still a major step up from Standard VGA).
See if you can enable OpenGL drawing in Photoshop. If you can and you don't get any funky stuff (broken cursors for the brush tool and the like) then there shouldn't be any problem with using those drivers. -
My Macbook built-in keyboard has stopped responding, (even caps lock light does not come on). What can I do as cannot even login to computer?
There has been no spillage and it has not been dropped.Do you have access to a USB wired Apple (or maybe even a PC) keyboard?
That may be used to help troubleshoot the internal keyboard and on startup
be able to access (or see if you can) the System, and attempt to see about
troubleshooting. See if it will start in SafeBoot, (shift key held down just after
startup tone, if it runs in safeboot, then login to see if you can read system
logs in Console) and another idea may be to attempt to start in Recovery &
then attempt to use OS X Utilities there to see if you can verify and then to
repair the hard disk drive, and do some checks on the hardware.
•Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
Was the computer an Apple official refurbished unit bought direct from Apple?
Did you get an extended warranty from Apple - if it were directly bought there?
Usually these are online purchases from Apple Store; other companies offer
repaired or restored used computers and call them 'refurbished' or they may
have bought actual refurbished from Apple stock; these may be resold on ebay
or via amazon, and may or may not have a residual warranty of some kind.
In some cases the keyboard may fail due to some connection on the logic board
not fitting correctly, or some other loose wire; however if the battery may have
swollen, that could contribute to issues with both trackpad and keyboard.
A visit to an authorized Apple service provider is recommended, or contact the
seller you bought yours from to ask if they may offer suggestions or perhaps a
discount on diagnostic + repair if there is no warranty on the product.
Find an Apple Authorized Service Provider
Visit an Apple Retail Store
https://locate.apple.com/country - locate authorized sales, service, by country.
Without more information, you may have to look into your local consumer
protection laws to see if your area may allow you more than others when
it comes to problems with electronics. If in the EU or UK, it may be longer.
You could contact a nearby Apple Store with Genius bar for advice...
Good luck & happy computing! -
I've only had my iphone 5s for a week. I keep getting an error message of "Server has stopped responding." I need the server to work. Does anyone know if there is a "fix" for the problem? Other wise, I probably best return for a refund and get a Samsung. Thanks
sandyzotz wrote:
Other wise, I probably best return for a refund and get a Samsung.
Unlikely. Based on the complete lack of detail of the issue provided it is entirely possible the same issue would occur.
Unless and until the user provides some actual details of the problem, there is nothing the indicate that the issue is with the iPhone. -
Satellite 1130-Z24,system has stopped working altogether
Hi
My system has stopped working altogether, since it was dropped, only from a small distance though. When connected to AC power, the light work, so I suspect power is getting to it, and I suspect I have damaged either the motherboard or power supply, but I am hoping something simple. Has anybody any manuals showing how to dismantle the satellite 1130, or any other suggestions.
Kind Rgrds
ChrisHello Chris
Unfortunately there is no official document how to disassemble/assemble your Satellite. In my opinion the best solution is to contact service partner in your country.
I am pretty sure that they can help you. Who knows which hardware part is damaged.
Good luck!
Maybe you are looking for
-
Installing Oracle9i on Linux Suse 7.1
When I ran the runinstaller of the first CD I got this error message : oracle@spirit:/DISK1/ORACLQA/Disk1> ./runInstaller oracle@spirit:/DISK1/ORACLQA/Disk1> Initializing Java Virtual Machine from /tmp/OraInstall20 03-09-27_02-34-50AM/jre/bin/java. P
-
I have my computer at home that has itunes on it. It is the one that I sync to my iphone. I have a computer at work that I would like to have the same itunes on it. How do I go about doing that?
-
How to share from Macbook(using wifi) to Apple TV (using ethernet)?
Hi- I recently moved in to my college dorm. I brought my Apple TV, and IT said the only way to hook it up was to directly connect the Apple TV with the ethernet cable in my dorm. That works fine, and I can still access Netflix and the other apps usin
-
Why there is no update for WRT54G Ver 7?
Why there is no update for WRT54G Ver 7? I can only see Ver 1, 1.1, 2, 3, 4, 5, 6, 8
-
Ibooks on imac not updating ibooks on ipad
Anybody had this problem ?