SYSTEM IDLE PROCESS SHOWING TOO MUCH CPU USAGE

I Have problem with system idle process showing too much cpu usage.but the process is normal.nothing more else.my laptop is toshiba satelite pro m300.pls give the solution as earliest as possible.

Without knowing the excat model or what software, hardware or external components are running CPU usage is just an average measurement. If you have alot of background components/software running can cause a high reading, as it you allowed updating to runn consistently, or IM Messenger to consistently gain access.

Similar Messages

TS1717 What do I have to do to keep the iTUNES program on my computer BUT NOT RUNNING on Start UP? It requires too much CPU usage on my old computer.

What do I have to do to keep the iTUNES loaded as a program on my computer BUT NOT RUNNING on Start UP? Just opening when I want to use it.
It requires too much CPU usage on my old computer.

You can check you Adobe account online to see if the serial number is registered under your account. If not then your only option will likely be to contact Adobe Support directly thru chat to see if they can provide you with a/the serial number. For them to do so will require you being able to prove ownership.
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

Photos App taking too much CPU usage

Hi everyone,
This morning I just installed Yosemite 10.10.3 and started to new Photos App.
Now, there is a processus taking almost 100% of CPU usage which I can't definitely kill : it always come back, even after I totally rebooted my MacBook Air. The Photos App is not running, but the process is.
See my the screenshot below.
The fan is spinning at more that 6000 rpm.
Anyone else having this issue?

Photos on my iMac uses 150% or more of the processor whenever it is open...even when I'm not doing anything in the app. Once I close the app the processor returns to normal usage. I just converted my Aperture library so perhaps it is doing background housekeeping? I don't know, but this doesn't look right.

Ns-slapd process taking too much cpu time

Dear All,
I am currently using directory server 6.2 and it comes out that the ns-slapd process is taking almost 95% of cpu time. This goes for 2 to 3 hours then it comes back to normal. This is happening every alternate day. I have monitored the log but could not find any suspected activity which may be causing this.
Is this something vulnerable in 6.2?
Any tunings that i should undergo?
Regards,
Scotty

Dear Ludovic,
i am finding alot of the below unindexed searches:
[30/Oct/2007:16:30:27 +0400] - WARNING<20805> - Backend Database - conn=-1 op=0 msgId=-1 - search is not indexed base='cn=changelog' filter='(&(nsroledn=un=xxcccvvvcb823f7,ou=gdf016926,ou=people,ou=2005,ou=r444,ou=mail,o=kas.ac,o=pblebs,o=pab)(|(objectclass=*)(objectclass=ldapsubentry)))' scope='sub'
and prstat is showing
PID USERNAME SIZE RSS STATE PRI NICE TIME CPU PROCESS/LWPID
13433 root 4357M 2727M run 32 0 1:44:10 3.6% ns-slapd/101
13433 root 4357M 2727M run 32 0 2:40:40 3.6% ns-slapd/84
13433 root 4357M 2727M run 33 0 0:55:00 3.5% ns-slapd/97
13433 root 4357M 2727M run 33 0 1:35:56 3.4% ns-slapd/57
13433 root 4357M 2727M run 33 0 0:24:45 3.4% ns-slapd/94
13433 root 4357M 2727M run 43 0 2:06:04 3.1% ns-slapd/86
and even more
Would it be of the unindexed searches?
Thanks,
Scorry

Playing Video files taking too much CPU processing(50 % )

Hello everyone,
My macbook taking too much CPU processing power for playing Video file.Below shared the statistics..Is it a issue..? can you please help me here..I can't play simultaneously 2-3 MKV videos..distorted picture Quality.
Macbook:
mkv
     Qucik Time PLayer (using perian plugin):50%
     vlc:40%
      mplayer:60%
normal(example Mp4)
     Qucik Time PLayer (using perian plugin):30%
     vlc:25%
where a normal Linux system takes
mkv file with VLC : 20-25%
Thanks in advance...

Simple thing to try would be to disable composite and see how you fare then
Check the logs first, though

System Idle process at Exchange server too high

Hi there everyone,
I am having an issue since a long period of time regarding the usage of CPU by system idle process at my exchange server 2010.I am hereby attaching the screenshots for more details.
What might be the issue guys as per your experience?
Regards,
Sufiyan

This one may help.
http://blogs.technet.com/b/maliks/archive/2012/04/25/exchange-2010-store-exe-service-takes-high-memory-utilization.aspx
or ask them more over here.
https://social.technet.microsoft.com/Forums/exchange/en-US/home?forum=exchange2010
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Firefox uses too much CPU ff3.6.3 any HELP?

Firefox uses way too much CPU. Running MAC OSX and ff 3.6.3 using "activity monitor" shows Firefox uses typically 96% of my CPU !!
== This happened ==
Every time Firefox opened
== I noticed my computer was getting s- l -o w- e -r

Hello Kr.
This kind of issues are, unfortunately, more common and the we'd like. Thankfully, 99% of the cases are very easy to solve. However, you do need to diagnose what your exact problem is. Do this:
#run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe-mode] to disable all extensions, themes and plugins. If this fixes your issues, be them with RAM or CPU usage, then you know it's a problem with plugins, themes or extensions. Proceed to number 2. If safe-mode doesn't fix the issues, then read bellow, after this list;
#update all extensions, themes and plugins in your Firefox. If this doesn't solve the issues, proceed to the following number;
#disable all extensions, themes and plugins in your Firefox (not running safe-mode). Being certain that, as in safe-mode, the problems you're having have gone away, enable one plugin at a time. You should be certain that you WANT that plugin to be enabled, so keep your overall number of plugins as low as possible. When you encounter the problems, you know you've found a problematic plugin, so disable it for good. Keep enabling all plugins (except problematic ones) until you've gone through them all.
#enable one extension at a time. Again, be certain that you WANT that extension to be enabled, so keep your overall number of extensions as low as possible. Also, try the theme you want to have installed so see if that is what's causing the problem. When you encounter the problems, you know you've found a problematic extension/theme, so disable it for good. Keep enabling all your extensions (except problematic ones) until you've gone through them all;
#you're done! You've fixed your problems with problematic add-ons. If you want to keep using those problematic add-ons, please contant their author for support.
Ok, if disabling all extensions and plugins through safe-mode didn't work to bring Firefox's CPU and RAM usage to good levels, then you have different issue. The most likely scenario is that you have a third party software running on your computer that is messing with Firefox. Do as follows:
#try reinstalling Firefox. No data will be lost. You can get the latest version for free at [http://www.getfirefox.com/ getfirefox.com]. If that doesn't fix the problem, proceed;
#do a virus/malware check on your computer. If this doesn't fix it, proceed;
#disable all software running in the background that you don't want to have running in the background (in windows, this is done by pressing WINDOWS+R in your keyboard, typing "msconfig" (without the commas) and pressing enter. Now, under the "Startup" tab, you can uncheck the software you don't want, and reboot your system for changes to take effect. If you're unsure of what software you want running, ask someone with more experience). If this doesn't fix your issues with Firefox, proceed;
#check your firewall/antivirus/security suite for enabled functions/features that you don't want and/or may be conflicting with Firefox. You'll find that these features are most likely tied to Internet Security features, such as link scanners or URL checkers and the like. If you're not sure they are conflicting with Firefox, simply try to disable them to see whether or not that's true. As long as you don't browse the web with your antivirus completely off and your firewall completely turned off, there should be no problems. If this doesn't solve the issues, proceed to the following number;
#check your operating system security options, mainly advanced options that are not configured by default. While it's very unlikely that this may be the cause of the problem (after all, it's the last item on the list), it's remotely possible. If this doesn't work, proceed to the following point;
#update your modem/router software. There have been some reports that some modem/router software may cause Firefox and other browsers to loose performance and/or stability. If updating doesn't fix your issue, try other versions of the software, if possible. If you need support with this, contact your modem/router manufacturer. If this doesn't help, proceed;
#clean up your OS registry, using appropriate software. Make sure you've followed my instructions correctly, but if this all doesn't work, [http://support.mozilla.com/en-US/kb/Managing+profiles create a new Firefox profile] (this can be temporary, of course) and see if the issues persist. Report here the results, so we can't help you further.

Thunar-vfs-pixbuf-thumbnailer-1 using too much CPU

thunar-vfs-pixbuf-thumbnailer-1 process is using too much CPU, noticeably slowing my system...
here's the screenshot: http://i15.tinypic.com/8fmu8nl.png
I've tried to kill it, but nothing happens...
what should I do?

Hello,
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Thank you.

SpamAssassin and too much CPU load

I have been testing my messaging server and SpamAssassin integration. Everything seems fine except too much CPU load coming from spamd (SpamAssassin's daemon). I am testing them on a UltraSparcII-i, 256MB, Solaris 10 box. When I loaded it with 4msg/min containing 50K ascii text each on the receiving side, the spamd process went up to 90% of CPU load, and then just died silently. My questions;
1) Is there any performance tuning that I should do to avoid that much CPU load? Or is this just normal?
2) I have heard of another anti-spam product called dspam. How can I integrate dspam with the Java Messaging Server?
Thanks!

Installation of JES Messaging Server by itself suggests 1.2 gig of RAM. SpamAssassin adds to that suggestion.
You have less than 1/4 of the suggested RAM. You're 'way short.
SpamAssassin will use cpu. I found that nx x86 box was far less expensive to feed, and works extremely well for Messaging and SpamAssassin. 1 gig or ram for my PC costs about $75. Adding ram to your Sparc will cost mor than a PC complete.
4 messages/min isn't much, but. . .
You're likely swapping pretty hard. Check for "I/O wait". I often use "top" for a quick look at such.
When I switched from an "ultra-5" with 384 megs ram, to an AMD 1200+ with 1 gig of ram, my system went from feeling totally buried to feeling mostly un-used. I'm currently able to handle far more than 4 message/minute, with no overload or swapping.

Theater 550 Pro's PowerCinema 4 take too much CPU resource?

Hello all Theater 550 Pro users,
I am experiencing Power Cinema 4 is taking too much CPU utilization on my PC, versus any other TV viewer apps like WinAmp TV, FlyTV, etc. CLCapSvc.exe is the process that blatantly taking most juice out of the CPU, causing TV viewing experience on Power Cinema 4 bad. Anyone know how to fix this? Any known patch for Powercinema4?
Now I'm using WinAmp's TV plugin until I find a better TV Viewer prog. Any suggestion?
Do you guys use any other TV Viewer app?

Thanks Stu. I'm still figuring how to get mediaportal working on my PC as over here only have analog TV, no EPG, no scheduler, no nothing... just plain old TV Viewer is all I want. However, PowerCinema4's CLCapSvc.exe issue shouldn't be ignored too...

Apple mobile device service uses too much cpu time

Apple mobile device service uses too much cpu time, from 88% to 99% of the CPU time.

The best way to fix this is to completely remove all aspects of iTunes then reinstall. Step by step directions are on this article. Good luck
http://support.apple.com/kb/HT1925?viewlocale=en_US

Server0 process taking too much time

Hi All,
Once i start the Netweaver server, the server) process taking too much time.
When i was installed Netweaver that time 13 min, after 2 months 18 min.. then 25 min now it is taking 35 minutes.... to become green color.
Why it is taking too much time, what might be the cause.....
Give some ideas to solve this problem..............
The server0 developer trace has this information continuously 6 to 7 times...
[Thr 4204] *************** STISEND ***************
[Thr 4204] STISEND: conversation_ID: 86244265
[Thr 4204] STISEND: sending 427 bytes
[Thr 4204] STISearchConv: found conv without search
[Thr 4204] STISEND: send synchronously
[Thr 4204] STISEND GW_TOTAL_SAPSEND_HDR_LEN: 88
[Thr 4204] NiIWrite: hdl 0 sent data (wrt=515,pac=1,MESG_IO)
[Thr 4204] STIAsSendToGw: Send to Gateway o.k.
[Thr 4204] STIAsRcvFromGw: timeout value: -1
[Thr 4204] NiIRead: hdl 0 recv would block (errno=EAGAIN)
[Thr 4204] NiIRead: hdl 0 received data (rcd=3407,pac=2,MESG_IO)
[Thr 4204] STIAsRcvFromGw: Receive from Gateway o.k.
[Thr 4204] STISEND: data_received: CM_COMPLETE_DATA_RECEIVED
[Thr 4204] STISEND: received_length: 3327
[Thr 4204] STISEND: status_received: CM_SEND_RECEIVED
[Thr 4204] STISEND: request_to_send_received: CM_REQ_TO_SEND_NOT_RECEIVED
[Thr 4204] STISEND: ok
[Thr 4204] STIRCV: new buffer state = BUFFER_EMPTY
[Thr 4204] STIRCV: ok
[Thr 4204] *************** STSEND ***************
[Thr 4204] STSEND: conversation_ID: 86244265
[Thr 4204] STISearchConv: found conv without search
[Thr 4204] STSEND: new buffer state = BUFFER_DATA
[Thr 4204] STSEND: 106 bytes buffered
[Thr 4204] *************** STIRCV ***************
[Thr 4204] STIRCV: conversation_ID: 86244265
[Thr 4204] STIRCV: requested_length: 16000 bytes
[Thr 4204] STISearchConv: found conv without search
[Thr 4204] STIRCV: send 106 buffered bytes before receive
[Thr 4204] STIRCV: new buffer state = BUFFER_DATA2
[Thr 4204] *************** STISEND ***************
then
[Thr 4252] JHVM_NativeGetParam: get profile parameter DIR_PERF
[Thr 4252] JHVM_NativeGetParam: return profile parameter DIR_PERF=C:\usr\sap\PRFCLOG
this message continuously
Can i have any solution for the above problem let me know .
Thanks & regards,
Sridhar M.

Hello Manoj,
Thanks for your quick response, Previously the server has 4GB RAM and now also it has same.
Yesterday i found some more information, like deployed(through SDM) applications also take some memory at the time of starting the J2EE server...Is it right?
Any other cause...let me know
Thanks & Regards,
Sridhar M.

I cannot watch Flash vids because Firefox uses too much CPU.

Firefox has become untenable because it uses too much CPU and disrupts Flash videos.
I've tried disabling or changing the values of plugins. Installing older versions. Nothing helps. It just sucks. It makes me want to pull someone's lungs out.

Everyone has this problem, since Firefox rigged one of its Plug-ins (something to do with crash reports) about 06 months ago, to max out CPU, thereby sabotaging computer performance (including Flash videos).
Why or how they haven't fixed it before now strains belief. I have seen the same complaint everywhere. It is a major fuck-up. People want to abandon Firefox in droves, except that none of the other browsers have decent add-ons like pop-up blocker.
Sort it out, Firefox.

Which oracle process takes how much cpu?

give me a query to find out
which oracle processes takes how much cpu?

Monitor how much a user is consuming CPU

ICloud photos process takes too much network resources

Photos of iCloud process takes too much network resources in the background and slows down a lot the iMAC. Almost impossible to navigate or use applications that uses internet connections.
I would like to pause the process or to configure it somehow to prevent excesive network utilization.

Do you have iPhoto setup to import all Photo Stream photos into your library? If so uncheck the circled checkbox in this screenshot and see if that will speed up things:
You'll have to manually import from the Photo Stream after that.
OT

SYSTEM IDLE PROCESS SHOWING TOO MUCH CPU USAGE

Similar Messages

Maybe you are looking for