System Image Utility App. 10.5.7 does not recognize any 10.6 disc...

i hope someone can help with this, i have not found anything related yet.
i am trying to create an netinstall image from any (upgrade, box set) 10.6 DVD and it is not being recognized by System Image Utility App. 10.5.7
the 10.6 DVDs mount fine on the desktop and in the finder.
the 10.6 DVDs do not show up in the left hand pane. according the SystemImaging_and_SW_Update_Adminv10.5.pdf I should see them there but they never show up.
is there something i am doing wrong? i have successfully created a netinstall image with a 10.5 DVD using the same software.
thanks in advance.

so after some googe-ling, i found out i need to download and install the 10.6 server admin tools and use the latest version of System Imaging Utility even though I am running 10.5.8 on my computer.
the current 10.6 server admin tools are available here: http://support.apple.com/kb/DL914?viewlocale=en_US if anyone needs it.

Similar Messages

  • For one Urgent Change during performing the Approval(chnging the status to 'To be Tested') system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.

    For one Urgent Change while performing the one of the Approval before changing the status to 'To Be Tested'
    We are getting below error.
    The system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.
    COuld anyone please help us to know, How it can be resolved?
    We also have this below error.
    System Response
    If the PPF action is a condition check, the condition is initially considered as not met, and leads to another warning, an error message, or status reset, depending on the configuration.
    If the PPF action is the execution of a task in the task list, and the exception is critical, there is another error message in the document.
    Procedure
    The condition cannot be met until the cause is removed. Analyze all messages in the transaction application log.
    Procedure for System Administration
    Analyze any other messages in the task list application log, and the entries for the object /TMWFLOW/CMSCV
    Additional Information:
    System cancel RFC destination SM_UK4CLNT005_TRUSTED, Call TR_READ_COMM:
    No authorization to log on as a trusted system (Tr usted RC=0).
    /TMWFLOW/TU_GET_REQUEST_REMOTE:E:/TMWFLOW/TRACK_N:107
    For above error Table /TMWFLOW/REP_DATA_FLOWwas refreshed as well but still the same error.

    If you are in Test System, you can use function module AA_AFABER_DELETE to totally delete the depreciation area (tcode SE37, specify chart of depreciation and depreciation area), After that recreate your depreciation area and run AFBN. But before you do that, have you created a retirement transaction type that limits the posting on your new depreciation area? If not create one.
    Hope this helps.
    Thanks!
    Jhero

  • My imac is not recognizing any external dvd writer drive. I have imac with Core i7 and Mac OS 10.6.8. I have tried external dvd writers from Samsung and Amazon Essentials but the computer does not recognize any of them. Which Dvd writer is compatible?

    My imac is not recognizing any external dvd writer drive. I have imac with Core i7 and Mac OS 10.6.8. I have tried external dvd writers from Samsung and Amazon Essentials but the computer does not recognize any of them. Which Dvd writer is compatible?

    I have an external firewire burner; it never shows on the desktop unless I insert a CD or DVD - that icon will then show (if I have my preferences set to show those on the desktop). Hae you checked in Disk Utility (Applications > Utilities) to see if it is listed under drives?

  • Windows XP re-installation does not recognize any hard drive - help

    Hi,
    I have X60s Model: 17044JU
    I have original XP installed.
    My computer is very slow and I am trying to reinstall XP from my CD (and format HD so I clean everything).
    When Windows installations blue screen shows up and loads drivers etc then it tells me that it does not recognize any hard drive.
    I thought I may need SCSI or RAID drivers but since I don't have floppy I can not load them.
    Any help how to install new XP would be appreciated.
    Thank you
    Miron
    Moderator edit: Masked serial number to prevent mis-use.
    Solved!
    Go to Solution.

    Hi
    I changed BIOS setup from AHCI to Compatibility and indeed it worked.
    However there is easier way to reload new system on thinkpad.
    I didn't know that but you can press ThinkVantage button when you start your laptop and IBM utilities start up.
    Then there is an option to reload the system to be in original state as shipped from the factory. It loads or drivers and initial programs. It also formats your hard drive.
    I found it pretty convenient.
    Thanks for help.
    mc

  • I am now able to receive emails in MAIL, but Yosemite's Mail program does not recognize any of the server's connections that have worked for years!  What do I do next?

    Yesterday, I was unable to receive emails from Google but was able to receive them from another server - but then receiving them began to work again - but now I am unable to send any mail - Yosemite's Mail program does not recognize any of the server's connections that have worked for years, !  What do I do next?

    Mail troubleshooting - Yosemite
    What does Mail/Window/Connection Doctor Show? If the server is red, select it and look at the Show Details box.
    Troubleshooting sending and receiving email messages
    Troubleshooting sending email messages

  • Hi I bought an America iPhone 5 and went on all mobile networks was blocked when I got home in Romania phone does not recognize any SIM not working sorry my english not good please can you help me

    hi I bought an America iPhone 5 and went on all mobile networks was blocked when I got home in Romania phone does not recognize any SIM not working sorry my english not good please can you help me

    Ask the carrier in the US who the phone is locked to if they will unlock it for you - put an unlock request into that carrier.
    Other than that and if they refuse to unlock it, then there is nothing you can do except buy a new phone.

  • HT4623 My IPhone 4S does not recognize any wi-fi network.  I have turned it off and on a dozen times and tried 6 places which have wi-fi.  Help

    My IPhone 4S does not recognize any wi-fi network.  I have turned it off and on a dozen times and tried 6 places which have wi-fi. 
    I am trying to update to 7.0.2 and cannot because I cannot access a wi-fi.

    Give this a whirl and see if this helps.
    Forget the network on the device and turn wifi off.
    Turn bluetooth off. (Not sure why, but seemed to help with others)
    Turn on airplane mode and then off again.
    Reconnect to you network and open up a browser to confirm connection.

  • My printer does not recognize any network

    my e-Station does not recognize any network

    Hey there!
    Exactly which model are you using? Any additional information would be great, such as what type of network you're trying to connect to and if you are connecting through a wireless or wired connection. Thanks!
    Help the community by marking this post as a solution if it solved your issue!.
    If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

  • Itunes does not recognize any calender to synchronize with

    My computer is repared and has a new hard disk.
    I have installed the latest version of iTunes and Outlook 2010 on my computer.
    I want to synchronize my iPad with my computer, but iTunes does not recognize any calender to sync with.
    In the old situation I synchronized my iPad with Outlook 2003. That worked fine.
    During the repare-time my iPad has become leading.
    How can I solve my problem

    Hello SCorky,
    The following article provides steps that can help get your devices back into iTunes.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Allen

  • Premiere Elements 12 does not recognize blank Blu-ray disc.

    I just upgraded from Premiere Elements 8 to PRE12.  Now when I insert a blank Blu-ray disc in the BR burner, I get a message "Media Not Present".  It does recognize the burner, but not the blank disc.  Yet when I open PRE 8, PRE 8 does recognize this very same disc in the same burner!  Also, PRE 12 can burn a blank DVD in this same burner.  The Blu-ray disc also appears as a completely blank in Windows File Explorer.  And this is a problem even after updating to release 12.1.  The Adobe chat representative tells me this is a know issue with PRE12.    I find that difficult to accept, since why would Adobe change in PRE 12 something that was not broken? What's the truth, and when and how can it be fixed?

    First, I tried uninstalling, register cleaning and reinstalling Premiere Elements.  This was a mess.  I kept getting error messages when trying to reinstall.  So I had to do a system restore to just before I uninstalled PRE.  After that restore, PRE would not open.  So I did another uninstall from Control Panel and reinstall, without touching the registry.  Then, I was back in operation, several frustrating hours later. But still the BR drive would not recognize Blu-ray discs.
    So then I loaded a BR-RE disc, instead of a BR-R, and still no recognition.
    Then I installed the external Blu-ray burner, and finally PRE12 recognized the blank Blu-ray disc.  I had a sign that this would work when I attached an external DVD drive to burn a AVCHD file, and PRE12 recognized the blank media, whereas it did not recognize any blank DVDs in the internal BR drive for burning AVCHD files.  As a alternative to borrowing an external BR drive to see if this fixes the Media not Present message, I suggest using a much more readily available external DVD drive and try to burn a AVCHD file first.  If that works, then one can be much more confident that purchasing an external Blu-ray drive will provide the solution.
    Yet I deeply resent having to purchase a $125 piece of hardware, which is otherwise useless to me, to fix a bug in a program.  The box promises the ability to export a Blu-ray disc.  Since their lawyers use the weasel word "compatible" Blu-ray burner required, I fully expect them to take the position that now only an external burner is "compatible", and do nothing to fix the compatibility with internal burners.  Potential buyers be forewarned!
    As an alternative to paying more money to make their software work as indicted on the box, one might want to settle for only being able to write AVCHD files to a DVD.  Most every computer (except Ultrabooks) has an internal DVD burner, which supposedly all that would be needed to burn this kind of HD file.  But first, we all need to know, will PRE12 return a Media not Present message when burning a AVCHD file to an internal DVD burner?  What are the field reports of any problems incurred doing this procedure?  Please advise.
    And one more question.  When I burn an AVCHD file to a DVD, the DVD is not finalizied by PRE12.  After burning the AVCHD file, the DVD shows free space available, but after burning a DVD Video, there is no free space available.  Moreover, ImgBurn does finalize DVDs after burning AVCHD files to them.  So Is this failure by PRE12 to finalize another bug?  Can ImgBurn now finalize an unfinalizied AVCHD disc left by PRE12 -- without having to run another session of PRE to burn to a folder now, of course?  If so, how?

  • My computer does not recognize Photoshop CS5 Extended disc

    my computer does not recognize CS5 Extended disc. Can anyone help me?

    if you follow all 7 steps you can dl a trial here:  http://prodesigntools.com/all-adobe-cs5-direct-download-links.html
    and activate with your serial.
    if you have a problem dl'g, you didn't follow all 7 steps.  the most common error involves failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).

  • HP Pavilion Elite e9120y bios does not recognize any cd/dvd/bluray or hard disk drives

    I erased my hard disk to install Windows 7.  Now my computer intermittently does not recognize that there are any drives attached to the sata ports.  I go into BIOS pressing F10 and it does not list any drives at all.  I have a DVD burner and a bluray and a western digital 1TB hard drive connected.  Sometimes they show that they are connected other times it doesn't.  It's strange.
    When it does recognize there are drives connected, I boot up from the Windows 7 DVD.  Then I try to create a partition on the hard drive.  The installation recognizes a 930GB hard drive with no partitions.  Every time I try to create a partition, it says I need a driver for the hard drive.  I have a driver that I downloaded off of HP's website yesterday, the driver for nvidia sata.  I put it on my usb drive.  It recognizes it but says it is the wrong driver.  I don't know what else to do.  I have built dozens of computer and repaired hundreds, but I have never run across a problem like this and I hope you can help me.

    Thanks for your help, but that's exactly the driver I used.  It didn't work.
    My problem is not just with the hard drive.  All three drives (two optical, one hard disk) should show up in bios, whether or not there is a disk in the optical drive or a partition on the hard drive.  It intermittently stops detecting the drives.  One time I boot and go into BIOS they are there, and I can run installation of Windows (partially).  But if a turn off the computer and turn it back on, they've disappeared.  Sometimes they will be detected, sometimes they won't.
    I'm thinking the driver problem with the Windows 7 Professional x64 installation is somehow connected to the drives randomly not showing up.  All drives stop showing up at the same time, not just the hard drive.  So it's not a driver issue.  It has to be connected to the BIOS and motherboard.
    This computer is only 4 months out of warranty.
    Any more help would be appreciated.

  • DVD drive does not recognize my Windows 7 disc

    I'm using a macbook pro purchased September 2009.
    I purchased Windows 7 home premium full version and when I insert the installation disc, both 32 and 64 bit versions, the DVD drive on the computer does not recognize the disc. It spits it back out. Anyone else having this problem?
    My external dvd drive works fine. I tried going through the install process this way but when the computer restarts, I get a screen that says no bootable device, press any button to continue.
    Need some help please.

    I am having the exact same problem! I currently am running Windows XP Pro in bootcamp and would like to use a Windows 7 Upgrade disk to upgrade my partition. (or clean install) But for some reason my Macbook Pro (also purchased recently) will not read the Upgrade DVD at all! I tied running it on startup, in Snow Leopard, and even in XP.
    Out of desperation, I ran the disk on my iMac (that has not been updated to Snow Leopard yet) and it read the disk perfectly! I then began to question if my Macbook's disk drive was working properly. So I then ran a random CD and then a DVD on it and both read flawlessly!
    Some people claim that they have fixed this problem simply by cleaning the Upgrade disk. This, however, did not work for me. There seems to be a trend with MacBooks having this trouble, but that could be completely coincidental! Apple has also announced that they will release an update that will officially provide support for Windows 7. Maybe this will provide a solution.
    I'm about out of ideas so any help would be greatly appreciated!

  • DNG Converter 6.4 does not recognize any RAW files

    Hi,
    I have updated DNG Converter from 6.2 RC to 6.3 and 6.4. DNG Converter 6.2 RC from Adobe Labs recognizes all my RAW files (Canon PowerShot S50, PowerShot SX1IS, EOS 400D). The official releases of 6.3 and 6.4 do not recognize any RAW files of these cameras.
    I select a directory, where the raw files are located, but DNG Converter tells me that no files where selected. With 6.2 RC, I select the directory and everything just works fine.
    What's wrong with this picture?
    atb,
    MOS-6502

    Ahh, I forgot:
    System is Windows Vista Ultimate 32bit, patched up to date.
    atb,
    MOS-6502

  • Itunes does not recognize any of my devices

    I connect my iPhone or iPad(s) and Itunes does not recognize they are there. I have Itunes latest version. My last backup I was able to do was back in January. I tried to delete and reload itunes and that does not help. My computer recognizes my devices are connected and I can back up my photots. Just Itunes fails to recognize they are connected. ALL my devices have the latest software.

    Hello SCorky,
    The following article provides steps that can help get your devices back into iTunes.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Allen

Maybe you are looking for