System Image Utility - Create User - Activate Remote Management

When creating an image with system image utility, based on a DVD image instead of a cloned image, I cannot create a user and activate Remote Management.
I have created an installer package with Apple Remote Desktop that is supposed to do both, however it doesn't work. I do not get an error, but no user is created.
I have tried a post-install script however the dscl command is not recognized even if I put the path /usr/bin/dscl.
I even tried to use a popular package out there called "createUser" but that fails as well.
Has anyone had any luck with this when trying to make a moduler image with System Image Utility?
Message was edited by: NeedSomeAnswer

After configuring all the appropriate settings, I
push the "Create" button and it appears to start
working, prompts me for a location to save the actual
image itself, creates a folder with the default name
and then nothing happens.
ok here's the deal: i created a folder in my OSX server home directory labelled "images" and keep our multiple images there. although you CAN have your images on other drives or on the network, that would take a LOOOOOOOONG time to do the data transfer to the invisible netboot folder on your server. my advice: keep local copies of all images. save a ton of time for yourself, eh?
then, when it's time to use the system image suntility to load up an image, i go to that same location each time, call it up and have the app set to the prefs i want or need. i'm on 10.4.7 server and have had no problem using the software.
so try using images locally and then, if that doesn't work, upgrade to 10.4.7

Similar Messages

  • System Image Utility "Create" problem

    We have a new Xserve that we're finally going to be available to use for Open Directory/Net Boot/Net Install/etc in our coporate network. So, this is all new to me but I'm trying to make a Net Install image to export to the server.
    My G5 workstation (Mac OS X 10.4.6, but the imaged drive has 10.4.5) has two hard drives, one of which has our corporate image of software installed on it, "clean". The other hard drive is my own with lots of extra software and customization. I'm trying to use the System Image Utility (v. 10.4.4 (251)) to create an image. I am an administrator user on my computer. After configuring all the appropriate settings, I push the "Create" button and it appears to start working, prompts me for a location to save the actual image itself, creates a folder with the default name and then nothing happens. The spinning gear would seem to indicate that the System Image Utility is doing something, but the "Create" button continues to throb blue. I can click "Create" again and another folder is created when I'm promted to save the image and it continues to remain empty. All I can do is click "Cancel" and start over.
    I was quite frustrated until I logged into my computer as the local administrator user (this user is employed when we're configuring a workstation for the first time to give it the correct file sharing name and bind it to the Active Directory). Creating an image works just find while I'm logged in as the local administrator. (At least as far as creating/exporting the image, getting Net Boot to turn on the Xserve is proving a challenge.)
    So, is there something preventing network administrator users from creating images? I'd really rather have my own e-mail open and running as well as my own bookmarks while I'm working on a project like this, but it doesn't seem possible. Any tips would be appreciated.
    -Doug

    After configuring all the appropriate settings, I
    push the "Create" button and it appears to start
    working, prompts me for a location to save the actual
    image itself, creates a folder with the default name
    and then nothing happens.
    ok here's the deal: i created a folder in my OSX server home directory labelled "images" and keep our multiple images there. although you CAN have your images on other drives or on the network, that would take a LOOOOOOOONG time to do the data transfer to the invisible netboot folder on your server. my advice: keep local copies of all images. save a ton of time for yourself, eh?
    then, when it's time to use the system image suntility to load up an image, i go to that same location each time, call it up and have the app set to the prefs i want or need. i'm on 10.4.7 server and have had no problem using the software.
    so try using images locally and then, if that doesn't work, upgrade to 10.4.7

  • System image utility : creating Leopard & SL Netinstall images to share on Lion

    Hi!
    I have recently upgraded to Lion server from SL server, our server had 1 main purpose: host Leopard & SL Netinstall images as well as some netboot diagnostic drives.
    It seems however that with a fresh install of Lion Server that trying to create a netinstall image from anything other then Lion doesnt work, even whipping out the old 10.6.3 install DVD mounts on the system but image utility shows no valid source.
    i remember going from tiger sever to leopard that i could no longer make tiger images, and had to run from a tiger system to create them, but when i was running SL, i was able to share leopard images without issue.
    So, is there anyway i can (without having to reinstall SL server ) i can create fresh netinstall images of 10.5 & 10.6OS's for my shiny new Lion server to share?
    now unfortunatley the leopard & SL images i had previously are gone (a HDD crash giving me reason to upgrade) (yeah yeah i know, backups.. ) but i thought i would just reimage the files again as that is this servers only purpose.
    Thank you kindly in advance, any help appreciated.
    Richard

    i know that was the case in Leopard and Snow Leopard but i just mounted a leopard image to create a new netrestore on my lion server.  i was not able to boot any of my images created on Leopard or SL when running Lion Server.  I assume i need to recreate the images on Lion.  Right now my Lion server is using a leopard image as the source to create a netrestore i can push on the Lion server.

  • System Image Utility 10.6.3 - fails when creating NetBoot image from DVD

    System Image Utility 10.6.3, trying to create a NetBoot image from a bundled installer disc that came with a 27" Late 2009 iMac (iMac11,1). Image creation fails consistently, since the image that System Image Utility creates is only 901M.
    Anyone see this before?
    Don
    --------- System Image Utility log ----------
    Workflow Started (2010-06-16 14:03:02 -0700)
    Starting action: Define Image Source
    Finished running action: Define Image Source
    Starting action: Create Image
    Starting image creation process...
    Create NetBoot Image
    Initiating NetBoot from Install Media.
    Creating working path at /Library/NetBoot/NetBootSP0/NetBoot of Mac OS X Install DVD
    Creating disk image (Size: 901 MB)
    Finalizing disk image.
    created: /Library/NetBoot/NetBootSP0/NetBoot of Mac OS X Install DVD/NetBoot.dmg
    Attaching disk image
    Installing to destination volume
    2010-06-16 14:03:38.126 installer[2365:6f03] Looking for system packages
    2010-06-16 14:03:38.129 installer[2365:6f03] no system packages found
    2010-06-16 14:03:38.130 installer[2365:6f03] No or Invalid system receipts found on /private/tmp/mnt.LjFArn
    2010-06-16 14:03:38.130 installer[2365:6f03] Attempting fallback using: /System/Library/PrivateFrameworks/SystemMigration.framework/Resources/FallbackS ystemFiles.plist
    2010-06-16 14:03:38.175 installer[2365:6f03] Finding system files...
    2010-06-16 14:03:38.619 installer[2365:6f03] Writing system path cache.
    2010-06-16 14:03:38.623 installer[2365:6f03] Error writing cache to /private/tmp/mnt.LjFArn/Library/Caches/com.apple.FindSystemFiles.plist
    2010-06-16 14:03:38.625 installer[2365:6f03] Failed to enumerate /tmp/mnt.LjFArn/Library/Caches, cannot prune (
    "com.apple.userpictureCache"
    installer: Package name is Mac OS X
    installer: Installing at base path /private/tmp/mnt.LjFArn
    installer: The install failed (There is not enough space on this disk to install the selected items. Deselect at least 6.46 GB and try again.)
    Script is done.
    NetBoot creation failed.
    Image creation process finished...
    Stopping image creation.
    Image creation failed.

    Brian Nesse wrote:
    Hi Don, here's my guess...
    The 901 number is additional space added in the scripts. This indicates that the source image size was 0.
    Since you are making a NetBoot from Install media, under the covers the installer process is being run to create a NetBoot volume. The media shipped with the 27" iMac is most likely CPU specific and thus the installation fails because you are trying to create the image (i.e. install the system) on an unsupported CPU.
    In order to produce a NetBoot from the install media, you'll have to create it on the 27" iMac.
    Hi Brian,
    Thanks for the response. This makes perfect sense. I'll give this a try and shout back!
    Thanks,
    Don

  • System Image Utility / Automator Add User Account no default shell

    I've noticed when creating a customized netrestore flow in System Image Utility for Yosemite, the result of the "Add User Account" action is a user missing a default shell. Noticed this when terminal kept closing as soon as it was opened. dscl -create localhost /Local/Default/Users/USERNAME UserShell /bin/bash fixed the issue but is obviously undesired for provisioning new computers. Any ideas how to configure a default shell for new users created in this way?

    Solved by ensuring the add user account action immediately follows the define image source action.

  • System Image Utility seems stuck in "Create Image" step.

    I'm building a NetRestore image with Snow Leopard 10.6.8 as base OS, but added 3rd party software packages. When I hit the "Run" button, it checkmarked all the steps before "Create Image." So I just left it to run the last step, but it's been running now for three days.
    I didn't add THAT many packages. I checked the Force Quit window today, but SIU is not shown in red saying that it stopped responding. Creating this image shouldn't be taking this long.
    SIU is running in XServe 3,1 with OS 10.6.8, and 24GB RAM.
    Any suggestions?

    I do not believe that's
    The server they have is in english yes.....
    I can not believe!!!
    i will try monday and tell you some thing.
    Brian can you say one more thing
    how do I create a script to insert in the post-install script They have in System Image Utility. "package and post-install script ."
    The file need to be in " .sh "??
    i can put the welcome message appear to select the portuguese language but i need to login in single user and put the;
    /sbin/fsck -fy
    /sbin/mount -uw /
    touch /var/db/.RunLanguageChooserToo
    Shutdown -h now
    And works.
    if i can put this in the installation process i thing it will will work.?
    Thanks again for your help

  • System Image Utility fails to create boot image

    I am not able to successfully build a boot image with the System Image Utility. The build starts and runs for about 1 minute and then I get 100's of ditto messages saying "No space left on device". There's plenty of space left on the device. Eventually I get a GUI message stating the there was an error creating the image. The image is of course unusable. This only happens on a Boot image. I have no problem making an install image from the same source. Is it just me??
    Xserve G5 Dual   Mac OS X (10.4.5)  

    I had simililar problems with much headscratching as the result.
    I found that whenever I tried to create a boot image with System Image Utility (SIU) using an image file of my existing system as the source SIU would fail with the annoying "No space left on device" message everytime. I did a little investigating and found that SIU always created a 400 MB disk image file to copy to. So the error message was correct as my source was way over 4 GB.
    I checked the manual and found the embarrasingly simple solution. It's not mentioned directly, rather it is stated that when you want to create an boot image from an existing system you should boot the machine containing the desired system on disk from an alternate source and the run SIU on that machine. The "trick" is that you're running SIU with the existing system mounted as a disk.
    So I went back to my Xserve, mounted the image so it appeared on the desktop. Ran SIU and chose the mounted volume as the source instead of the image file, and hey presto!
    MacBook Pro, Xserve, eMac, iMac... any Mac I can get my hands on   Mac OS X (10.4.6)  

  • Can I create a system image with System Image Utility and then transfer the image folder to another server?

    I am currently in the process of creating several images to restore for classroom purposes. I am wondering if it is possible to use the System Image Utility on a computer which has Server Admin Tools installed, then transfer that image folder directly to the "NetBoot" folder on our current Apple Netboot Server. Has anyone tried this and/or succeeded? I'd like to get some feedback before attempting it myself on our college's netboot server. Thanks!

    We've run into a few problems concerning this process. When we create the image on a seperate machine from the server using SIU and then place it in the NetBoot folder, not every .nbi folder created works properly. We're running into errors that say "Could not find any scan information. The source needs to be imagescanned before it can be restored". This does not happen with every image, but it does happen with computers which have a lot of programs installed on them. Is there a way to imagescan the .nbi folder and/or resolve this issue without going through the process of making a completely new NetRestore image?

  • Error creating a netboot image with System Image Utility

    Hi all !
    I am trying to create a NetBoot image from my Panther CD, to boot an old iBook.
    I am using System Image Utility version 10.4.11.
    I can create a NetInstall image, but when I create a NetBoot image SIU give me an error.
    I looked in the logs and I can see the error is generated by the script Applications/Server/System Image Utility.app/Contents/Resources/.preinstall
    This command is the culprit:
    /usr/sbin/installer -verbose -lang 'eng' -pkg '/Volumes/Mac OS X Install Disc 1/System/Installation/Packages/OSInstall.mpkg' -target /Library/NetBoot/NetBootSP0/PantBoot3.nbi/mnt -_multiDiscPath /tmp/siuInstallExtras
    The error is (as seen in the logs):
    This package requires authentication to install.
    If I take the command and run it in the terminal using sudo it goes thru, but gives another error:
    installer: Cannot install on volume /Library/NetBoot/NetBootSP0/PantBoot3.nbi/mnt because it is disabled.
    installer: Mac OS X cannot start up from this volume.
    Is this thing supposed to work ?? It seems to me SIU is buggy.
    Any help would be much appreciated.
    Regards
    Mike

    I'm not digging the new SIU at all yet. Maybe I'll get used to it in time. I couldn't get it to accept a Tiger 10.4.6 Install disc the other day to build a NetInstall. Don't know if I was doing something wrong or if it was instinctively rejecting it because I was doing something unsupported.
    I miss NetRestore. I think Mike wants use to use Automator... but I want NetRestore's automated Multicast ASR and Windows image restore. It would take a lot of work to match Mike's shrink-wrapped solution.
    Speaking of NetRestore, its creator Mike Bombich advises against use CCC for mass deployment. This may include what you're doing. It's really a backup tool, but unfortunately a lot of people got into the habit of using it for creating deployment images and these often have problems. It's the best tool for create images that you will deploy onto multiple Macs.

  • Creating 10.5. images in System Image Utility 10.6.2

    Hi folks,
    I need to create NetBoot images for 10.5.x and 10.6.x images. I'm running Snow Leopard 10.6.2 and I have System Image Utility 10.6.2, which is able to create NetBook images ONLY of Mac OS 10.6. Why? How can I create older one? I tried to run System Image Utility 10.5.7 on SL but it ended with an linkage error on startup.
    Is there any chance to create 10.5 NetBoot on SL?
    Thank you. Any help is appreciated.

    Yes, this solution came to my mind, but is way too complicated for us. Why it is not possible to make it with 10.6.2 tool or run 10.5.7 tool on SL? Apple starts annoy me more and more (Dropped context menu, and much more stuff :-/)

  • System image utility set to create NetRestore Image, creates Netboot Disk instead

    Hi, I'm trying to create some OS X 10.10.1 netrestore images and no matter what I do with selecting options SIU makes the image a netboot image instead of a netrestore image. Has anyone any suggestions?
    As a workaround I've created my image and used the .dmg with an old working netrestore image.

    Hi Patrick,
    If you are having issues creating a NetRestore image in System Image Utility, you may find the following articles helpful (apologies if you have already seen them):
    OS X Server: System Image Utility requires Recovery HD partition to create a NetRestore image - Apple Support
    OS X Server: Creating a single NetBoot, NetInstall or NetRestore image for multiple Mac computers - Apple Support
    Regards,
    - Brenden

  • System Imaging Utility + Scripts to create a Netinstall

    I need everyone's help on this one!
    We have an Xserve G5 server that is running Leopard Server 10.5.2. What we want to be able to do is Netinstall Windows’s script to image a drive on a dual boot Mac Pro, meaning partition the drive for Mac and Windows. Currently Netinstall only supports Tiger dual boot it won't work on Leopard. I'm not sure when Bombich will be releasing this on his web site for Leopard. However, is there a script that will work with Windows using the System Imaging Utility that is in Leopard?
    Can someone please give me the steps to do?
    Thank you
    Phil

    I know this is kinda old but netrestore has been updated so i think you should be set now

  • System image utility fails "Unknown error has occurred"

    Hi,
    I can create disk images from 10.8.3 clients but when i'm putting them through system utility on the 10.8 server it fails after hours of running.
    The log is set to debug and shows the image creates upto 83% then jumps to 100% and later shows unknown errors and failed to create image from restore souce.
    I've created several disk images and saved them to different locations on the server as the source and final image.
    Below i've put in the debug log. Someone please help!!
    Workflow Started (2012-01-02 13:56:58 +0000)
    OS X Server 10.8.3 (12D78), System Image Utility 10.8.3 (624)
    Starting action: Define Image Source (1.4)
    Finished running action: Define Image Source
    Starting action: Create Image (1.7.2)
    Starting image creation process...
    Create NetRestore Image
    Initiating NetRestore from installed volume.
    progressPrefix="_progress"
    ++ progressPrefix=_progress
    scriptsDebugKey="DEBUG"
    ++ scriptsDebugKey=DEBUG
    imageIsUDIFKey="1"
    ++ imageIsUDIFKey=1
    imageFormatKey="UDZO"
    ++ imageFormatKey=UDZO
    mountPoint=""
    ++ mountPoint=
    ownershipInfoKey="501:20"
    ++ ownershipInfoKey=501:20
    blockCopyDeviceKey="0"
    ++ blockCopyDeviceKey=0
    dmgTarget="NetInstall"
    ++ dmgTarget=NetInstall
    potentialRecoveryDevice="disk3s3"
    ++ potentialRecoveryDevice=disk3s3
    asrSource="ASRInstall.pkg"
    ++ asrSource=ASRInstall.pkg
    destPath="/Volumes/Macintosh HD/Library/NetBoot/NetBootSP0/NetRestore of Macintosh 10-8_2.nbi"
    ++ destPath='/Volumes/Macintosh HD/Library/NetBoot/NetBootSP0/NetRestore of Macintosh 10-8_2.nbi'
    skipReorderingKey="0"
    ++ skipReorderingKey=0
    sourceVol="/Volumes/Macintosh HD 1"
    ++ sourceVol='/Volumes/Macintosh HD 1'
    postInstallHelperKey="1"
    ++ postInstallHelperKey=1
    . "${1}/createCommon.sh"
    + . /tmp/niutemp.YPRmigsL/createCommon.sh
    # createCommon.sh
    # Common functionality for the Image creation process.
    # sourced in by the various SIU scripts
    # Copyright © 2007-2012 Apple Inc. All rights reserved.
    # Using dscl, create a user account
    AddLocalUser()
    # $1 volume whose local node database to modify
    # $2 long name
    # $3 short name
    # $4 isAdminUser key
    # $5 password data
    # $6 password hint
    # $7 user picture path
    # $8 Language string
    local databasePath="/Local/Default/Users/${3}"
    local targetVol="${1}"
    # Find a free UID between 501 and 599
    for ((i=501; i<600; i++)); do
    output=`/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -search /Local/Default/Users UniqueID $i`
    # If there is already an account dscl returns it, so we're looking for an empty return value.
    if [ "$output" == "" ]; then
    break
    fi
    done
    # Create the user record
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -create $databasePath
    if [ $? != 0 ]; then
    echo "Failed to create '${databasePath}'."
    return 1
    fi
    # Add long name
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath RealName "${2}"
    if [ $? != 0 ]; then
    echo "Failed to set the RealName."
    return 1
    fi
    # Set up the users group information
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath PrimaryGroupID 20
    if [ $? != 0 ]; then
    echo "Failed to set the PrimaryGroupID."
    return 1
    fi
    # Add some additional stuff if the user is an admin
    if [ "${4}" == 1 ]; then
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append "/Local/Default/Groups/admin" GroupMembership "${3}"
    if [ $? != 0 ]; then
    echo "Failed to add the user to the admin group."
    return 1
    fi
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append "/Local/Default/Groups/_appserveradm" GroupMembership "${3}"
    if [ $? != 0 ]; then
    echo "Failed to add the user to the _appserveradm group."
    return 1
    fi
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append "/Local/Default/Groups/_appserverusr" GroupMembership "${3}"
    if [ $? != 0 ]; then
    echo "Failed to add the user to the _appserverusr group."
    return 1
    fi
    fi
    # Add UniqueID
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath UniqueID ${i}
    if [ $? != 0 ]; then
    echo "Failed to set the UniqueID."
    return 1
    fi
    # Add Home Directory entry
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath NFSHomeDirectory /Users/${3}
    if [ $? != 0 ]; then
    echo "Failed to set the NFSHomeDirectory."
    fi
    if [ "${6}" != "" ]; then
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath AuthenticationHint "${6}"
    if [ $? != 0 ]; then
    echo "Failed to set the AuthenticationHint."
    return 1
    fi
    fi
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath picture "${7}"
    if [ $? != 0 ]; then
    echo "Failed to set the picture."
    return 1
    fi
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -passwd $databasePath "${5}"
    if [ $? != 0 ]; then
    echo "Failed to set the passwd."
    return 1
    fi
    # Add shell
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath UserShell "/bin/bash"
    if [ $? != 0 ]; then
    echo "Failed to set the UserShell."
    return 1
    fi
    # Create Home directory
    if [ -e "/System/Library/User Template/${8}.lproj/" ]; then
    /usr/bin/ditto "/System/Library/User Template/${8}.lproj/" "${targetVol}/Users/${3}"
    else
    /usr/bin/ditto "/System/Library/User Template/English.lproj/" "${targetVol}/Users/${3}"
    fi
    if [ $? != 0 ]; then
    echo "Failed to copy the User Template."
    return 1
    fi
    /usr/sbin/chown -R $i:$i "${targetVol}/Users/${3}"
    if [ $? != 0 ]; then
    echo "Failed to set ownership on the User folder."
    return 1
    fi
    # Copies a list of files (full paths contained in the file at $1) from source to the path specified in $2
    CopyEntriesFromFileToPath()
    local theFile="$1"
    local theDest="$2"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    while read FILE
    do
    if [ -e "${FILE}" ]; then
    local leafName=`basename "${FILE}"`
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Copying ${FILE}."
    fi
    /usr/bin/ditto $opt "${FILE}" "${theDest}/${leafName}" || return 1
    fi
    done < "${theFile}"
    return 0
    # Copies a list of packages (full path, destination pairs contained in the file at $1) from source to .../System/Installation/Packages/
    CopyPackagesWithDestinationsFromFile()
    local theFile="$1"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    while read FILE
    do
    if [ -e "${FILE}" ]; then
    local leafName=`basename "${FILE}"`
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Copying ${FILE}."
    fi
    read SUB_PATH
    /usr/bin/ditto $opt "${FILE}" "${mountPoint}/Packages/${SUB_PATH}${leafName}" || return 1
    fi
    done < "${theFile}"
    return 0
    # Create an installer package in ${1} wrapping the supplied script ${2}
    CreateInstallPackageForScript()
    local tempDir="$1"
    local scriptPath="$2"
    local scriptName=`basename "${scriptPath}"`
    local entryDir=`pwd`
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Create installer for script ${scriptName}"
    opt="-v"
    fi
    # shouldn't exist on entry...
    if [ -e "${tempDir}/emptyDir" ]; then
    /bin/rm -rf "${tempDir}/emptyDir"
    fi
    # make some directories to work in
    /bin/mkdir $opt -p "${tempDir}/${scriptName}.pkg/Contents/Resources" || return 1
    /bin/mkdir $opt "${tempDir}/emptyDir" || return 1
    # Create Archive.pax.gz
    cd "${tempDir}/emptyDir"
    /bin/pax -w -x cpio -f "${tempDir}/${scriptName}.pkg/Contents/Archive.pax" .
    /usr/bin/gzip "${tempDir}/${scriptName}.pkg/Contents/Archive.pax"
    cd "${entryDir}"
    # Create the Archive.bom file
    /usr/bin/mkbom "${tempDir}/emptyDir/" "${tempDir}/${scriptName}.pkg/Contents/Archive.bom" || return 1
    # Create the Info.plist
    /bin/cat > "${tempDir}/${scriptName}.pkg/Contents/Info.plist" << END
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>CFBundleIdentifier</key>
    <string>com.apple.SystemImageUtility.${scriptName}</string>
    <key>CFBundleShortVersionString</key>
    <string>1</string>
    <key>IFMajorVersion</key>
    <integer>1</integer>
    <key>IFMinorVersion</key>
    <integer>0</integer>
    <key>IFPkgFlagDefaultLocation</key>
    <string>/tmp</string>
    <key>IFPkgFlagInstallFat</key>
    <false/>
    <key>IFPkgFlagIsRequired</key>
    <false/>
    <key>IFPkgFormatVersion</key>
    <real>0.10000000149011612</real>
    </dict>
    </plist>
    END
    echo "pkmkrpkg1" > "${tempDir}/${scriptName}.pkg/Contents/PkgInfo"
    echo "major: 1\nminor: 0" > "${tempDir}/${scriptName}.pkg/Contents/Resources/package_version"
    # Copy the script
    /bin/cp "$scriptPath" "${tempDir}/${scriptName}.pkg/Contents/Resources/postflight"
    # clean up
    /bin/rm -r "${tempDir}/emptyDir"
    return 0
    # Validate or create the requested directory
    CreateOrValidatePath()
    local targetDir="$1"
    if [ ! -d "${targetDir}" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Creating working path at ${targetDir}"
    fi
    /bin/mkdir -p "${targetDir}" || return 1
    fi
    # If any exist, apply any user accounts
    CreateUserAccounts()
    # $1 volume whose local node database to modify
    local count="${#userFullName[*]}"
    local targetVol="${1}"
    if [ $count -gt 0 ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Adding $count user account(s) to the image"
    fi
    for ((index=0; index<$count; index++)); do
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Adding user ${userFullName[$index]}"
    fi
    #lay down user here
    AddLocalUser "${targetVol}" "${userFullName[$index]}" "${userUnixName[$index]}" "${userIsAdmin[$index]}" "${userPassword[$index]}" "${userPassHint[$index]}" "${userImagePath[$index]}" "${userLanguage[$index]}"
    if [ $? != 0 ]; then
    echo "Failed to create the User '${userUnixName[$index]}'."
    return 1
    fi
    #suppress the Apple ID request
    DisableAppleIDRequestForUser "${targetVol}" "${userUnixName[$index]}"
    done
    # "touch"
    /usr/bin/touch "${targetVol}/private/var/db/.AppleSetupDone"
    /usr/bin/touch "${targetVol}/Library/Receipts/.SetupRegComplete"
    fi
    # retry the hdiutil detach until we either time out or it succeeds
    retry_hdiutil_detach()
    local mount_point="${1}"
    local tries=0
    local forceAt=0
    local limit=24
    local opt=""
    forceAt=$(($limit - 1))
    while [ $tries -lt $limit ]; do
    tries=$(( tries + 1 ))
    /bin/sleep 5
    echo "Attempting to detach the disk image again..."
    /usr/bin/hdiutil detach "${mount_point}" $opt
    if [ $? -ne 0 ]; then
    # Dump a list of any still open files on the mountPoint
    if [ "${scriptsDebugKey}" == "DEBUG" ]; then
    /usr/sbin/lsof +fg "${mount_point}"
    fi
    if [ $tries -eq $forceAt ]; then
    echo "Failed to detach disk image at '${mount_point}' normally, adding -force."
    opt="-force"
    fi
    if [ $tries -eq $limit ]; then
    echo "Failed to detach disk image at '${mount_point}'."
    exit 1
    fi
    else
    tries=$limit
    fi
    done
    # Create the dyld shared cache files
    DetachAndRemoveMount()
    local theMount="${1}"
    local mountLoc=`mount | grep "${theMount}"`
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Detaching disk image"
    # Dump a list of any still open files on the mountPoint
    if [ "${scriptsDebugKey}" == "DEBUG" ]; then
    /usr/sbin/lsof +fg "${theMount}"
    fi
    fi
    # Finally detach the mount (if it's actually mounted) and dispose the mountPoint directory
    if [ "${mountLoc}" != "" ]; then
    /usr/bin/hdiutil detach "${theMount}" || retry_hdiutil_detach "${theMount}" || return 1
    fi
    /bin/rmdir "${theMount}" || return 1
    return 0
    # Turn off the Apple ID request that happens on first boot after installing the OS
    DisableAppleIDRequestForUser()
    local targetUserLib="${1}/Users/${2}/Library"
    # Only do this if the file doesn't exist
    if [ ! -e "${targetUserLib}/Preferences/com.apple.SetupAssistant.plist" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Disabling Apple ID request for user '${2}'"
    fi
    /usr/libexec/PlistBuddy -c "Add :DidSeeCloudSetup bool 1" "${targetUserLib}/Preferences/com.apple.SetupAssistant.plist" > /dev/null 2>&1
    /usr/libexec/PlistBuddy -c "Add :LastSeenCloudProductVersion string 10.8" "${targetUserLib}/Preferences/com.apple.SetupAssistant.plist" > /dev/null 2>&1
    fi
    return 0
    # If the pieces exist, enable remote access for the shell image
    EnableRemoteAccess()
    local srcVol="${1}"
    local opt=""
    if [ -e "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Enabling shell image remote access support"
    opt="-v"
    fi
    # install some things (again which aren't part of BaseSystem) needed for remote ASR installs
    /usr/bin/ditto $opt "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" "${mountPoint}/usr/lib/pam/pam_serialnumber.so.2" || return 1
    if [ -e "${srcVol}/usr/sbin/installer" ]; then
    /usr/bin/ditto $opt "${srcVol}/usr/sbin/installer" "${mountPoint}/usr/sbin/installer" || return 1
    fi
    # copy the sshd config and add our keys to the end of it
    if [ -e "${srcVol}/etc/sshd_config" ]; then
    /bin/cat "${srcVol}/etc/sshd_config" - > "${mountPoint}/etc/sshd_config" << END
    HostKey /private/var/tmp/ssh_host_key
    HostKey /private/var/tmp/ssh_host_rsa_key
    HostKey /private/var/tmp/ssh_host_dsa_key
    END
    fi
    fi
    return 0
    # If it exists, install the sharing names and/or directory binding support to the install image
    HandleNetBootClientHelper()
    local tempDir="${1}"
    local targetVol="${2}"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    if [ -e  "${tempDir}/bindingNames.plist" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Directory Service binding information"
    fi
    /usr/bin/ditto $opt "${tempDir}/bindingNames.plist" "${targetVol}/etc/bindingNames.plist" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/etc/bindingNames.plist"
    /bin/chmod 644 "${targetVol}/etc/bindingNames.plist"
    fi
    if [ -e  "${tempDir}/sharingNames.plist" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Sharing Names support"
    fi
    /usr/bin/ditto $opt "${tempDir}/sharingNames.plist" "${targetVol}/etc/sharingNames.plist" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/etc/sharingNames.plist"
    /bin/chmod 644 "${targetVol}/etc/sharingNames.plist"
    fi
    if [ -e  "${tempDir}/NetBootClientHelper" ]; then
    /usr/bin/ditto $opt "${tempDir}/NetBootClientHelper" "${targetVol}/usr/sbin/NetBootClientHelper" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/usr/sbin/NetBootClientHelper"
    /bin/chmod 555 "${targetVol}/usr/sbin/NetBootClientHelper"
    /usr/bin/ditto $opt "${tempDir}/com.apple.NetBootClientHelper.plist" "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
    /bin/chmod 644 "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
    # finally, make sure it isn't disabled...
    /usr/libexec/PlistBuddy -c "Delete :com.apple.NetBootClientHelper" "${targetVol}/var/db/launchd.db/com.apple.launchd/overrides.plist" > /dev/null 2>&1
    fi
    return 0
    # If any exist, install configuration profiles to the install image
    InstallConfigurationProfiles()
    local tempDir="${1}"
    local targetVol="${2}"
    local profilesDir="${targetVol}/var/db/ConfigurationProfiles"
    if [ -e  "${tempDir}/configProfiles.txt" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Configuration Profiles"
    fi
    /bin/mkdir -p "${profilesDir}/Setup" || return 1
    # Make sure the perms are correct
    /usr/sbin/chown root:wheel "${profilesDir}"
    /bin/chmod 755 "${profilesDir}"
    /usr/sbin/chown root:wheel "${profilesDir}/Setup"
    /bin/chmod 755 "${profilesDir}/Setup"
    /usr/bin/touch "${profilesDir}/.profilesAreInstalled"
    CopyEntriesFromFileToPath "${tempDir}/configProfiles.txt" "${profilesDir}/Setup" || return 1
    # Enable MCX debugging
    if [ 1 == 1 ]; then
    if [ -e  "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" ]; then
    /usr/libexec/PlistBuddy -c "Delete :debugOutput" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
    /usr/libexec/PlistBuddy -c "Delete :collateLogs" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
    fi
    /usr/libexec/PlistBuddy -c "Add :debugOutput string -2" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
    /usr/libexec/PlistBuddy -c "Add :collateLogs string 1" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
    fi
    fi
    # Converts a list of scripts (full paths contained in the file at $1) into packages in $3
    InstallScriptsFromFile()
    local tempDir="${1}"
    local theFile="${2}"
    local targetDir="${3}"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Converting scripts into install packages"
    opt="-v"
    fi
    while read FILE
    do
    if [ -e "${FILE}" ]; then
    # make an installer package out of the script
    CreateInstallPackageForScript "$tempDir" "${FILE}" || return 1
    # copy the resulting package to the Packages directory
    local leafName=`basename "${FILE}"`
    /usr/bin/ditto $opt "${tempDir}/${leafName}.pkg" "${targetDir}/${leafName}.pkg" || return 1
    # clean up
    /bin/rm -r "${tempDir}/${leafName}.pkg"
    fi
    done < "${theFile}"
    return 0
    # Prepare the source by deleting stuff we don't want to copy if sourcing a volume
    PostFlightDestination()
    local tempDir="${1}"
    local destDir="${2}"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Performing post install cleanup"
    opt="-v"
    fi
    # delete the DS indices to force reindexing...
    if [ -e "${mountPoint}/var/db/dslocal/indices/Default/index" ]; then
    /bin/rm $opt "${mountPoint}/var/db/dslocal/indices/Default/index"
    fi
    # detach the disk and remove the mount folder
    DetachAndRemoveMount "${mountPoint}"
    if [ $? != 0 ]; then
    echo "Failed to detach and clean up the mount at '${mountPoint}'."
    return 1
    fi
    echo "Correcting permissions. ${ownershipInfoKey} $destDir"
    /usr/sbin/chown -R "${ownershipInfoKey}" "$destDir"
    # Prepare the source by deleting stuff we don't want to copy if sourcing a volume
    PreCleanSource()
    local srcVol="$1"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    if [ -e "$srcVol/private/var/vm/swapfile*" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Removing swapfiles on $1"
    fi
    /bin/rm $opt "$srcVol/private/var/vm/swapfile*"
    fi
    if [ -e "$srcVol/private/var/vm/sleepimage" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Removing sleepimage on $1"
    fi
    /bin/rm $opt "$srcVol/private/var/vm/sleepimage"
    fi
    if [ -d "$srcVol/private/tmp" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Cleaning out /private/tmp on $1"
    fi
    /bin/rm -r $opt "$srcVol/private/tmp/*" > /dev/null 2>&1
    fi
    if [ -d "$srcVol/private/var/tmp" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Cleaning out /private/var/tmp on $1"
    fi
    /bin/rm -r $opt "$srcVol/private/var/tmp/*" > /dev/null 2>&1
    fi
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Cleaning out devices and volumes on $1"
    fi
    if [ -d "$srcVol/Volumes" ]; then
    /bin/rm -r $opt "$srcVol/Volumes/*" > /dev/null 2>&1
    fi
    if [ -d "$srcVol/dev" ]; then
    /bin/rm $opt "$srcVol/dev/*" > /dev/null 2>&1
    fi
    if [ -d "$srcVol/private/var/run" ]; then
    /bin/rm -r $opt "$srcVol/private/var/run/*" > /dev/null 2>&1
    fi
    # Copy kernel and build the kext cache on the boot image
    PrepareKernelAndKextCache()
    local srcDir="$1"
    local destDir="$2"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Preparing the kernel and kext cache for the boot image"
    opt="-v"
    fi
    # Insure the kext cache on our source volume (the boot shell) is up to date
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Updating kext cache on source volume"
    fi
    /usr/sbin/kextcache -update-volume "${srcDir}" || return 1
    # Copy the i386 and, if it exists, the x86_64 architecture
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing the kext cache to the boot image"
    fi
    # make sure this doesn't exist
    if [ -e "${destDir}/i386" ]; then
    /bin/rm -rf "${destDir}/i386"
    fi
    # Install kextcaches to the nbi folder
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Creating a kernelcache for the boot shell"
    fi
    /bin/mkdir -p $opt "${destDir}/i386/x86_64" || return 1
    /usr/sbin/kextcache -arch x86_64 -L -N -S -z -K "${srcDir}/mach_kernel" -c "${destDir}/i386/x86_64/kernelcache" "${srcDir}/System/Library/Extensions" || return 1

    I am seeing a very similar output trying to make a netrestore image of a 10.8.4 Macbook Air on a 10.8.4 Mac Mini running OSX Server.  Gets to 84% and then shows the -1 progress and then just hangs until I cancel it (I haven't tried leaving it over night but left it that way for hours).
    Did you ever figure out what was going on or have a workaround to create an image?
    Thanks!

  • System Image Utility always fails, why?

    Hi everyone,
    on my clean and fresh install of 10.7.4 Server the System Image Utility always fails to create an image. I want to create a NetInstall image and have put the OS X Lion Installer in /Applications. I can select it in SIU and choose to create a NetInstall image. It asks for the admin pw and always presents an error at the very end: Image creation failed. An unknown error has occured.
    If I select to create a NetBoot image instead it fails directly after clicking on the Create button with this slightly different message: Image creation failed. An error has occured. At least it’s no unknown error…
    Any ideas what might be causing this? I have succesfully created NetInstall images with 10.6 Server and 10.8 Server, but 10.7 Server somehow won’t play nice.
    Thanks
    Björn

    Hi Brian,
    I first deleted the Installer and redownloaded it from the App Store, just to make sure there was no problem with it. Even though I now have the 10.7.4 Installer (had 10.7.0 before) nothing has changed. I then went on to set the log level as suggested. I now get different errors based on the chosen log level.
    Log level set to debug:
    Image creation failed.
    *** -[__NSArrayM insertObject:atIndex:]: object cannot be nil
    Log level set to verbose:
    Image creation failed.
    An unknown error has occurred.
    I did not see anything helpful in the logs unfortunately. The only noticeable thing mentioned was: Failed to create image from installer media.
    Any additional ideas? I will attach both logs here, just in case.
    VERBOSE LOG:
    Starting image creation.
    Workflow Started (2012-09-08 14:08:00 +0200)
    Mac OS X Server 10.7.4 (11E53), System Image Utility 10.7.3 (543)
    Starting action: Define Image Source (1.3)
    Finished running action: Define Image Source
    Starting action: Create Image (1.6.2)
    Starting image creation process...
    Create NetInstall Image
    Initiating NetInstall from Installer media.
    Creating working path at /Users/vm/Desktop/NetInstall of Install Mac OS X Lion
    Creating disk image (Size: 4062 MB)
    Finalizing disk image.
    created: /Users/vm/Desktop/NetInstall of Install Mac OS X Lion/NetInstall.dmg
    Attaching disk image
    Copying /Volumes/Mac OS X Install ESD
    Preparing the kernel and boot loader for the boot image
    /Users/vm/Desktop/NetInstall of Install Mac OS X Lion/i386
    /Users/vm/Desktop/NetInstall of Install Mac OS X Lion/i386/x86_64
    Copying /Volumes/Mac OS X Install ESD/boot.efi
    Copying /Volumes/Mac OS X Install ESD/System/Library/CoreServices/PlatformSupport.plist
    Performing post install cleanup
    Detaching disk image
    "disk4" unmounted.
    "disk4" ejected.
    Correcting permissions. 501:20 /Users/vm/Desktop/NetInstall of Install Mac OS X Lion
    Script is done.
    Failed to create image from installer media.
    An unknown error has occurred.
    NetInstall creation failed.
    Image creation process finished...
    Stopping image creation.
    Image creation failed.
    DEBUG LOG:
    Starting image creation.
    Workflow Started (2012-09-08 13:59:22 +0200)
    Mac OS X Server 10.7.4 (11E53), System Image Utility 10.7.3 (543)
    Starting action: Define Image Source (1.3)
    Finished running action: Define Image Source
    Starting action: Create Image (1.6.2)
    Starting image creation process...
    Create NetInstall Image
    Initiating NetInstall from Installer media.
    progressPrefix="_progress"
    ++ progressPrefix=_progress
    scriptsDebugKey="DEBUG"
    ++ scriptsDebugKey=DEBUG
    imageIsUDIFKey="1"
    ++ imageIsUDIFKey=1
    mountPoint=""
    ++ mountPoint=
    ownershipInfoKey="501:20"
    ++ ownershipInfoKey=501:20
    destVolFSType="HFS+"
    ++ destVolFSType=HFS+
    installSource="/Volumes/Mac OS X Install ESD"
    ++ installSource='/Volumes/Mac OS X Install ESD'
    dmgTarget="NetInstall"
    ++ dmgTarget=NetInstall
    destPath="/Users/vm/Desktop/NetInstall of Install Mac OS X Lion"
    ++ destPath='/Users/vm/Desktop/NetInstall of Install Mac OS X Lion'
    dmgVolName="NetInstall"
    ++ dmgVolName=NetInstall
    . "${1}/createCommon.sh"
    + . /tmp/niutemp.Yv8Z6Mqx/createCommon.sh
    # createCommon.sh
    # Common functionality for the Image creation process.
    # sourced in by the various SIU scripts
    # Copyright © 2007-2011 Apple Inc. All rights reserved.
    # Using dscl, create a user account
    AddLocalUser()
    # $1 volume whose local node database to modify
    # $2 long name
    # $3 short name
    # $4 isAdminUser key
    # $5 password data
    # $6 password hint
    # $7 user picture path
    # $8 Language string
    local databasePath="/Local/Default/Users/${3}"
    local targetVol="${1}"
    # Find a free UID between 501 and 599
    for ((i=501; i<600; i++)); do
    output=`/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -search /Local/Default/Users UniqueID $i`
    # If there is already an account dscl returns it, so we're looking for an empty return value.
    if [ "$output" == "" ]; then
    break
    fi
    done
    # Create the user record
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -create $databasePath
    if [ $? != 0 ]; then
    echo "Failed to create '${databasePath}'."
    return 1
    fi
    # Add long name
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath RealName "${2}"
    if [ $? != 0 ]; then
    echo "Failed to set the RealName."
    return 1
    fi
    # Add PrimaryGroupID
    if [ "${4}" == 1 ]; then
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath PrimaryGroupID 80
    else
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath PrimaryGroupID 20
    fi
    if [ $? != 0 ]; then
    echo "Failed to set the PrimaryGroupID."
    return 1
    fi
    # Add UniqueID
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath UniqueID ${i}
    if [ $? != 0 ]; then
    echo "Failed to set the UniqueID."
    return 1
    fi
    # Add Home Directory entry
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath NFSHomeDirectory /Users/${3}
    if [ $? != 0 ]; then
    echo "Failed to set the NFSHomeDirectory."
    fi
    if [ "${6}" != "" ]; then
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath AuthenticationHint "${6}"
    if [ $? != 0 ]; then
    echo "Failed to set the AuthenticationHint."
    return 1
    fi
    fi
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath picture "${7}"
    if [ $? != 0 ]; then
    echo "Failed to set the picture."
    return 1
    fi
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -passwd $databasePath "${5}"
    if [ $? != 0 ]; then
    echo "Failed to set the passwd."
    return 1
    fi
    # Add shell
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath UserShell "/bin/bash"
    if [ $? != 0 ]; then
    echo "Failed to set the UserShell."
    return 1
    fi
    # Create Home directory
    if [ -e "/System/Library/User Template/${8}.lproj/" ]; then
    /usr/bin/ditto "/System/Library/User Template/${8}.lproj/" "${targetVol}/Users/${3}"
    else
    /usr/bin/ditto "/System/Library/User Template/English.lproj/" "${targetVol}/Users/${3}"
    fi
    if [ $? != 0 ]; then
    echo "Failed to copy the User Template."
    return 1
    fi
    /usr/sbin/chown -R $i:$i "${targetVol}/Users/${3}"
    if [ $? != 0 ]; then
    echo "Failed to set ownership on the User folder."
    return 1
    fi
    # Copies a list of files (full paths contained in the file at $1) from source to the path specified in $2
    CopyEntriesFromFileToPath()
    local theFile="$1"
    local theDest="$2"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    while read FILE
    do
    if [ -e "${FILE}" ]; then
    local leafName=`basename "${FILE}"`
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Copying ${FILE}."
    fi
    /usr/bin/ditto $opt "${FILE}" "${theDest}/${leafName}" || return 1
    fi
    done < "${theFile}"
    return 0
    # Copies a list of packages (full path, destination pairs contained in the file at $1) from source to .../System/Installation/Packages/
    CopyPackagesWithDestinationsFromFile()
    local theFile="$1"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    while read FILE
    do
    if [ -e "${FILE}" ]; then
    local leafName=`basename "${FILE}"`
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Copying ${FILE}."
    fi
    read SUB_PATH
    /usr/bin/ditto $opt "${FILE}" "${mountPoint}/Packages/${SUB_PATH}${leafName}" || return 1
    fi
    done < "${theFile}"
    return 0
    # Create an installer package in ${1} wrapping the supplied script ${2}
    CreateInstallPackageForScript()
    local tempDir="$1"
    local scriptPath="$2"
    local scriptName=`basename "${scriptPath}"`
    local entryDir=`pwd`
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Create installer for script ${scriptName}"
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    fi
    # shouldn't exist on entry...
    if [ -e "${tempDir}/emptyDir" ]; then
    /bin/rm -rf "${tempDir}/emptyDir"
    fi
    # make some directories to work in
    /bin/mkdir $opt -p "${tempDir}/${scriptName}.pkg/Contents/Resources" || return 1
    /bin/mkdir $opt "${tempDir}/emptyDir" || return 1
    # Create Archive.pax.gz
    cd "${tempDir}/emptyDir"
    /bin/pax -w -x cpio -f "${tempDir}/${scriptName}.pkg/Contents/Archive.pax" .
    /usr/bin/gzip "${tempDir}/${scriptName}.pkg/Contents/Archive.pax"
    cd "${entryDir}"
    # Create the Archive.bom file
    /usr/bin/mkbom "${tempDir}/emptyDir/" "${tempDir}/${scriptName}.pkg/Contents/Archive.bom" || return 1
    # Create the Info.plist
    /bin/cat > "${tempDir}/${scriptName}.pkg/Contents/Info.plist" << END
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>CFBundleIdentifier</key>
    <string>com.apple.server.SystemImageUtility.${scriptName}</string>
    <key>CFBundleShortVersionString</key>
    <string>1</string>
    <key>IFMajorVersion</key>
    <integer>1</integer>
    <key>IFMinorVersion</key>
    <integer>0</integer>
    <key>IFPkgFlagDefaultLocation</key>
    <string>/tmp</string>
    <key>IFPkgFlagInstallFat</key>
    <false/>
    <key>IFPkgFlagIsRequired</key>
    <false/>
    <key>IFPkgFormatVersion</key>
    <real>0.10000000149011612</real>
    </dict>
    </plist>
    END
    echo "pkmkrpkg1" > "${tempDir}/${scriptName}.pkg/Contents/PkgInfo"
    echo "major: 1\nminor: 0" > "${tempDir}/${scriptName}.pkg/Contents/Resources/package_version"
    # Copy the script
    /bin/cp "$scriptPath" "${tempDir}/${scriptName}.pkg/Contents/Resources/postflight"
    # clean up
    /bin/rm -r "${tempDir}/emptyDir"
    return 0
    # Validate or create the requested directory
    CreateOrValidatePath()
    local targetDir="$1"
    if [ ! -d "${targetDir}" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Creating working path at ${targetDir}"
    fi
    /bin/mkdir -p "${targetDir}" || return 1
    fi
    # If any exist, apply any user accounts
    CreateUserAccounts()
    # $1 volume whose local node database to modify
    local count="${#userFullName[*]}"
    local targetVol="${1}"
    if [ $count -gt 0 ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Adding $count user account(s) to the image"
    fi
    for ((index=0; index<$count; index++)); do
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Adding user ${userFullName[$index]}"
    fi
    #lay down user here
    AddLocalUser "${targetVol}" "${userFullName[$index]}" "${userUnixName[$index]}" "${userIsAdmin[$index]}" "${userPassword[$index]}" "${userPassHint[$index]}" "${userImagePath[$index]}" "${userLanguage[$index]}"
    if [ $? != 0 ]; then
    echo "Failed to create the User '${userUnixName[$index]}'."
    return 1
    fi
    done
    # "touch"
    /usr/bin/touch "${targetVol}/private/var/db/.AppleSetupDone"
    /usr/bin/touch "${targetVol}/Library/Receipts/.SetupRegComplete"
    fi
    # retry the hdiutil detach until we either time out or it succeeds
    retry_hdiutil_detach()
    local mount_point="${1}"
    local tries=0
    local forceAt=0
    local limit=24
    local opt=""
    forceAt=$(($limit - 1))
    while [ $tries -lt $limit ]; do
    tries=$(( tries + 1 ))
    /bin/sleep 5
    echo "Attempting to detach the disk image again..."
    /usr/bin/hdiutil detach "${mount_point}" $opt
    if [ $? -ne 0 ]; then
    # Dump a list of any still open files on the mountPoint
    if [ "${scriptsDebugKey}" == "DEBUG" ]; then
    /usr/sbin/lsof +fg "${mount_point}"
    fi
    if [ $tries -eq $forceAt ]; then
    echo "Failed to detach disk image at '${mount_point}' normally, adding -force."
    opt="-force"
    fi
    if [ $tries -eq $limit ]; then
    echo "Failed to detach disk image at '${mount_point}'."
    exit 1
    fi
    else
    tries=$limit
    fi
    done
    # Create the dyld shared cache files
    DetachAndRemoveMount()
    local theMount="${1}"
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Detaching disk image"
    # Dump a list of any still open files on the mountPoint
    if [ "${scriptsDebugKey}" == "DEBUG" ]; then
    /usr/sbin/lsof +fg "${theMount}"
    fi
    fi
    # Finally detach the image and dispose the mountPoint directory
    /usr/bin/hdiutil detach "${theMount}" || retry_hdiutil_detach "${theMount}" || return 1
    /bin/rmdir "${theMount}" || return 1
    return 0
    # If the pieces exist, enable remote access for the shell image
    EnableRemoteAccess()
    local srcVol="${1}"
    local opt=""
    if [ -e "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Enabling shell image remote access support"
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    fi
    # install some things (again which aren't part of BaseSystem) needed for remote ASR installs
    /usr/bin/ditto $opt "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" "${mountPoint}/usr/lib/pam/pam_serialnumber.so.2" || return 1
    if [ -e "${srcVol}/usr/sbin/installer" ]; then
    /usr/bin/ditto $opt "${srcVol}/usr/sbin/installer" "${mountPoint}/usr/sbin/installer" || return 1
    fi
    # copy the sshd config and add our keys to the end of it
    if [ -e "${srcVol}/etc/sshd_config" ]; then
    /bin/cat "${srcVol}/etc/sshd_config" - > "${mountPoint}/etc/sshd_config" << END
    HostKey /private/var/tmp/ssh_host_key
    HostKey /private/var/tmp/ssh_host_rsa_key
    HostKey /private/var/tmp/ssh_host_dsa_key
    END
    fi
    fi
    return 0
    # If it exists, install the sharing names and/or directory binding support to the install image
    HandleNetBootClientHelper()
    local tempDir="${1}"
    local targetVol="${2}"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    if [ -e  "${tempDir}/bindingNames.plist" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Directory Service binding information"
    fi
    /usr/bin/ditto $opt "${tempDir}/bindingNames.plist" "${targetVol}/etc/bindingNames.plist" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/etc/bindingNames.plist"
    /bin/chmod 644 "${targetVol}/etc/bindingNames.plist"
    fi
    if [ -e  "${tempDir}/sharingNames.plist" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Sharing Names support"
    fi
    /usr/bin/ditto $opt "${tempDir}/sharingNames.plist" "${targetVol}/etc/sharingNames.plist" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/etc/sharingNames.plist"
    /bin/chmod 644 "${targetVol}/etc/sharingNames.plist"
    fi
    if [ -e  "${tempDir}/NetBootClientHelper" ]; then
    /usr/bin/ditto $opt "${tempDir}/NetBootClientHelper" "${targetVol}/usr/sbin/NetBootClientHelper" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/usr/sbin/NetBootClientHelper"
    /bin/chmod 555 "${targetVol}/usr/sbin/NetBootClientHelper"
    /usr/bin/ditto $opt "${tempDir}/com.apple.NetBootClientHelper.plist" "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
    /bin/chmod 644 "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
    # finally, make sure it isn't disabled...
    /usr/libexec/PlistBuddy -c "Delete :com.apple.NetBootClientHelper" "${targetVol}/var/db/launchd.db/com.apple.launchd/overrides.plist" > /dev/null 2>&1
    fi
    return 0
    # If any exist, install configuration profiles to the install image
    InstallConfigurationProfiles()
    local tempDir="${1}"
    local targetVol="${2}"
    local profilesDir="${targetVol}/var/db/ConfigurationProfiles"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    if [ -e  "${tempDir}/configProfiles.txt" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Configuration Profiles"
    fi
    /bin/mkdir -p "${profilesDir}/Setup" || return 1
    # Make sure the perms are correct
    /usr/sbin/chown root:wheel "${profilesDir}"
    /bin/chmod 755 "${profilesDir}"
    /usr/sbin/chown root:wheel "${profilesDir}/Setup"
    /bin/chmod 755 "${profilesDir}/Setup"
    /usr/bin/touch "${profilesDir}/.profilesAreInstalled"
    CopyEntriesFromFileToPath "${tempDir}/configProfiles.txt" "${profilesDir}/Setup" || return 1
    # Enable MCX debugging
    if [ 1 == 1 ]; then
    if [ -e  "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" ]; then
    /usr/libexec/PlistBuddy -c "Delete :debugOutput" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
    /usr/libexec/PlistBuddy -c "Delete :collateLogs" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
    fi
    /usr/libexec/PlistBuddy -c "Add :debugOutput string -2" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
    /usr/libexec/PlistBuddy -c "Add :collateLogs string 1" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
    fi
    fi
    # Converts a list of scripts (full paths contained in the file at $1) into packages in $3
    InstallScriptsFromFile()
    local tempDir="${1}"
    local theFile="${2}"
    local targetDir="${3}"
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Converting scripts into install packages"
    fi
    while read FILE
    do
    if [ -e "${FILE}" ]; then
    # make an installer package out of the script
    CreateInstallPackageForScript "$tempDir" "${FILE}" || return 1
    # copy the resulting package to the Packages directory
    local leafName=`basename "${FILE}"`
    /usr/bin/ditto $opt "${tempDir}/${leafName}.pkg" "${targetDir}/${leafName}.pkg" || return 1
    # clean up
    /bin/rm -r "${tempDir}/${leafName}.pkg"
    fi
    done < "${theFile}"
    return 0
    # Prepare the source by deleting stuff we don't want to copy if sourcing a volume
    PostFlightDestination()
    local tempDir="${1}"
    local destDir="${2}"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Performing post install cleanup"
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
    opt="-v"
    fi
    fi
    # delete the DS indices to force reindexing...
    if [ -e "${mountPoint}/var/db/dslocal/indices/Default/index" ]; then
    /bin/rm $opt "${mountPoint}/var/db/dslocal/indices/Default/index"
    fi
    # detach the disk and remove the mount folder
    DetachAndRemoveMount "${mountPoint}"
    if [ $? != 0 ]; then
    echo "Failed to detach and clean up the mount at '${mountPoint}'."
    return 1
    fi
    echo "Correcting permissions. ${ownershipInfoKey} $destDir"
    /usr/sbin/chown -R "${ownershipInfoKey}" "$destDir"
    # Prepare the source by deleting stuff we don't want to copy if sourcing a volume
    PreCleanSource()
    local srcVol="$1"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
    opt="-v"
    fi
    fi
    if [ -e "$srcVol/private/var/vm/swapfile*" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Removing swapfiles on $1"
    fi
    /bin/rm $opt "$srcVol/private/var/vm/swapfile*"
    fi
    if [ -d "$srcVol/private/tmp" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Cleaning out /private/tmp on $1"
    fi
    /bin/rm -r $opt "$srcVol/private/tmp/*"
    fi
    if [ -d "$srcVol/private/var/tmp" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Cleaning out /private/var/tmp on $1"
    fi
    /bin/rm -r $opt "$srcVol/private/var/tmp/*"
    fi
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Cleaning out devices and volumes on $1"
    fi
    if [ -d "$srcVol/Volumes" ]; then
    /bin/rm -r $opt "$srcVol/Volumes/*"
    fi
    if [ -d "$srcVol/dev" ]; then
    /bin/rm $opt "$srcVol/dev/*"
    fi
    if [ -d "$srcVol/private/var/run" ]; then
    /bin/rm -r $opt "$srcVol/private/var/run/*"
    fi
    # Copy kernel and build the kext cache on the boot image
    PrepareKernelAndKextCache()
    local srcDir="$1"
    local destDir="$2"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Preparing the kernel and kext cache for t          /bin/rmdir "${theMount}" || return 1
    return 0
    # If the pieces exist, enable remote access for the shell image
    EnableRemoteAccess()
    local srcVol="${1}"
    local opt=""
    if [ -e "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Enabling shell image remote access support"
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    fi
    # install some things (again which aren't part of BaseSystem) needed for remote ASR installs
    /usr/bin/ditto $opt "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" "${mountPoint}/usr/lib/pam/pam_serialnumber.so.2" || return 1
    if [ -e "${srcVol}/usr/sbin/installer" ]; then
    /usr/bin/ditto $opt "${srcVol}/usr/sbin/installer" "${mountPoint}/usr/sbin/installer" || return 1
    fi
    # copy the sshd config and add our keys to the end of it
    if [ -e "${srcVol}/etc/sshd_config" ]; then
    /bin/cat "${srcVol}/etc/sshd_config" - > "${mountPoint}/etc/sshd_config" << END
    HostKey /private/var/tmp/ssh_host_key
    HostKey /private/var/tmp/ssh_host_rsa_key
    HostKey /private/var/tmp/ssh_host_dsa_key
    END
    fi
    fi
    return 0
    # If it exists, install the sharing names and/or directory binding support to the install image
    HandleNetBootClientHelper()
    local tempDir="${1}"
    local targetVol="${2}"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    if [ -e  "${tempDir}/bindingNames.plist" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Directory Service binding information"
    fi
    /usr/bin/ditto $opt "${tempDir}/bindingNames.plist" "${targetVol}/etc/bindingNames.plist" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/etc/bindingNames.plist"
    /bin/chmod 644 "${targetVol}/etc/bindingNames.plist"
    fi
    if [ -e  "${tempDir}/sharingNames.plist" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Sharing Names support"
    fi
    /usr/bin/ditto $opt "${tempDir}/sharingNames.plist" "${targetVol}/etc/sharingNames.plist" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/etc/sharingNames.plist"
    /bin/chmod 644 "${targetVol}/etc/sharingNames.plist"
    fi
    if [ -e  "${tempDir}/NetBootClientHelper" ]; then
    /usr/bin/ditto $opt "${tempDir}/NetBootClientHelper" "${targetVol}/usr/sbin/NetBootClientHelper" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/usr/sbin/NetBootClientHelper"
    /bin/chmod 555 "${targetVol}/usr/sbin/NetBootClientHelper"
    /usr/bin/ditto $opt "${tempDir}/com.apple.NetBootClientHelper.plist" "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
    /bin/chmod 644 "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
    # finally, make sure it isn't disabled...
    /usr/libexmountPoint=`mktemp -d "/tmp/mnt.XXXXXXXX"`
    errExit()
    echo "Execution of '`basename ${0}`' failed. Cleaning up."
    # detach the disk and remove the mount folder
    DetachAndRemoveMount "${mountPoint}"
    /bin/rm -r "${destPath}"
    exit 1
    # Set up for script debugging
    debug_opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
    debug_opt="-v"
    fi
    # Prepare the destination
    CreateOrValidatePath "$destPath" || errExit
    # update progress information
    echo "${progressPrefix}_creatingImage_"
    if [ -e "${installSource}/BaseSystem.dmg" ]; then
    size=$2
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
    echo "Creating disk image (Size: $size MB)"
    fi
    /usr/bin/hdiutil create "$destPath/$dmgTarget" -megabytes $size -volname "${dmgVolName}" -uid 0 -gid 80 -mode 1775 -layout "SPUD" -fs "$destVolFSType" -stretch 500g -ov -puppetstrings || errExit
    echo "${progressPrefix}_copyingSource_"
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
    echo "Attaching disk image"
    fi
    /usr/bin/hdiutil attach "${destPath}/${dmgTarget}.dmg" -owners on -nobrowse -noautoopen -mountpoint "${mountPoint}" -quiet || errExit
    # Copy source Volume base system to
    /usr/bin/ditto $debug_opt "${installSource}" "${mountPoint}" || errExit
    else
    echo "This does not appear to be a Mac OS X Install DVD."
    errExit
    fi
    # If adding any additional packages or scripts
    if [ -e "${1}/OSInstall.collection" ]; then
    /usr/bin/ditto $debug_opt "${1}/OSInstall.collection" "${mountPoint}/Packages/OSInstall.collection" || errExit
    /usr/sbin/chown root:wheel "${mountPoint}/Packages/OSInstall.collection"
    # If adding any additional packages
    if [ -e "${1}/additionalPackages.txt" ]; then
    CopyPackagesWithDestinationsFromFile "${1}/additionalPackages.txt" || errExit
    fi
    # If adding any scripts
    if [ -e "${1}/additionalScripts.txt" ]; then
    InstallScriptsFromFile "${1}" "${1}/additionalScripts.txt" "${mountPoint}/Packages" || errExit
    fi
    fi
    # If it exists, install the partition data onto the install image
    ProcessAutoPartition "${1}" || errExit
    # If it exists, install minstallconfig.xml (AutoInstall data) onto the install image
    ProcessMinInstall "${1}" || errExit
    # update progress information
    echo "${progressPrefix}_buildingBooter_"
    # Copy kernel and boot loader
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Preparing the kernel and boot loader for the boot image"
    fi
    # make sure this doesn't exist
    if [ -e "${destPath}/i386" ]; then
    /bin/rm -rf "${destPath}/i386"
    fi
    /bin/mkdir -p $debug_opt "${destPath}/i386/x86_64" || errExit
    # copy these directly off the install media
    /usr/bin/ditto $debug_opt "${installSource}/boot.efi" "${destPath}/i386/booter" || errExit
    /usr/bin/chflags nohidden "${destPath}/i386/booter"
    # Grab the relevant portion of the com.apple.Boot.plist
    kernelFlags=`/usr/libexec/PlistBuddy -c "print :'Kernel Flags'" "${installSource}/Library/Preferences/SystemConfiguration/com.apple.Boot.plist"`
    /usr/libexec/PlistBuddy -c "add :'Kernel Flags' string ${kernelFlags}" "${destPath}/i386/com.apple.Boot.plist" > /dev/null 2>&1
    /usr/bin/ditto $debug_opt "${installSource}/System/Library/CoreServices/PlatformSupport.plist" "${destPath}/i386/PlatformSupport.plist" || errExit
    # extract the kernel & kernelcache for the boot shell
    /usr/bin/lipo -extract i386 "${mountPoint}/kernelcache" -output "${destPath}/i386/kernelcache" || errExit
    /usr/bin/lipo -extract x86_64 "${mountPoint}/kernelcache" -output "${destPath}/i386/x86_64/kernelcache" || errExit
    # Apply choice changes, if any
    if [ -e "${1}/MacOSXInstaller.choiceChanges" ]; then
    echo "Copy over package choice selection."
    /usr/bin/ditto $debug_opt "${1}/MacOSXInstaller.choiceChanges" "${mountPoint}/Packages/Extras/MacOSXInstaller.choiceChanges"
    fi
    # update progress information
    echo "${progressPrefix}_finishingUp_"
    # perform the final cleanup
    PostFlightDestination "${1}" "$destPath" || errExit
    errExit
    Vol/private/tmp" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Cleaning out /private/tmp on $1"
    fi
    /bin/rm -r $opt "$srcVol/private/tmp/*"
    fi
    if [ -d "$srcVol/private/var/tmp" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Cleaning out /private/var/tmp on $1"
    fi
    /bin/rm -r $opt "$srcVol/private/var/tmp/*"
    fi
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Cleaning out devices and volumes on $1"
    fi
    if [ -d "$srcVol/Volumes" ]; then
    /bin/rm -r $opt "$srcVol/Volumes/*"
    fi
    if [ -d "$srcVol/dev" ]; then
    /bin/rm $opt "$srcVol/dev/*"
    fi
    if [ -d "$srcVol/private/var/run" ]; then
    /bin/rm -r $opt "$srcVol/private/var/run/*"
    fi
    # Copy kernel and build the kext cache on the boot image
    PrepareKernelAndKextCache()
    local srcDir="$1"
    local destDir="$2"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Preparing the kernel and kext cache for tPERCENT:0.000000
    PERCENT:4.332841
    PERCENT:8.985722
    PERCENT:12.358444
    PERCENT:14.524864
    PERCENT:16.617430
    PERCENT:19.522402
    PERCENT:21.614967
    PERCENT:23.535204
    PERCENT:26.070902
    PERCENT:29.271296
    PERCENT:33.111767
    PERCENT:38.847858
    PERCENT:42.343674
    PERCENT:44.707043
    PERCENT:46.578041
    PERCENT:49.138355
    PERCENT:51.772526
    PERCENT:55.563763
    PERCENT:58.567207
    PERCENT:62.210735
    PERCENT:64.795670
    PERCENT:69.719353
    PERCENT:74.741508
    PERCENT:77.055641
    PERCENT:79.591331
    PERCENT:83.013290
    PERCENT:85.548988
    PERCENT:88.010834
    PERCENT:91.728210
    PERCENT:97.710487
    PERCENT:100.000000
    PERCENT:-1.000000
    Finalizing disk image.
    created: /Users/vm/Desktop/NetInstall of Install Mac OS X Lion/NetInstall.dmg
    /bin/rmdir "${theMount}" || return 1
    return 0
    # If the pieces exist, enable remote access for the shell image
    EnableRemoteAccess()
    local srcVol="${1}"
    local opt=""
    if [ -e "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Enabling shell image remote access support"
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    fi
    # install some things (again which aren't part of BaseSystem) needed for remote ASR installs
    /usr/bin/ditto $opt "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" "${mountPoint}/usr/lib/pam/pam_serialnumber.so.2" || return 1
    if [ -e "${srcVol}/usr/sbin/installer" ]; then
    /usr/bin/ditto $opt "${srcVol}/usr/sbin/installer" "${mountPoint}/usr/sbin/installer" || return 1
    fi
    # copy the sshd config and add our keys to the end of it
    if [ -e "${srcVol}/etc/sshd_config" ]; then
    /bin/cat "${srcVol}/etc/sshd_config" - > Creating working path at /Users/vm/Desktop/NetInstall of Install Mac OS X Lion
    Creating disk image (Size: 4062 MB)
    /tmp/ssh_host_dsa_key
    END
    fi
    fi
    return 0
    # If it exists, install the sharing names and/or directory binding support to the install image
    HandleNetBootClientHelper()
    local tempDir="${1}"
    local targetVol="${2}"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    if [ -e  "${tempDir}/bindingNames.plist" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Directory Service binding information"
    fi
    /usr/bin/ditto $opt "${tempDir}/bindingNames.plist" "${targetVol}/etc/bindingNames.plist" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/etc/bindingNames.plist"
    /bin/chmod 644 "${targetVol}/etc/bindingNames.plist"
    fi
    if [ -e  "${tempDir}/sharingNames.plist" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Sharing Names support"
    fi
    /usr/bin/ditto $opt "${tempDir}/sharingNames.plist" "${targetVol}/etc/sharingNames.plist" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/etc/sharingNames.plist"
    /bin/chmod 644 "${targetVol}/etc/sharingNames.plist"
    fi
    if [ -e  "${tempDir}/NetBootClientHelper" ]; then
    /usr/bin/ditto $opt "${tempDir}/NetBootClientHelper" "${targetVol}/usr/sbin/NetBootClientHelper" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/usr/sbin/NetBootClientHelper"
    /bin/chmod 555 "${targetVol}/usr/sbin/NetBootClientHelper"
    /usr/bin/ditto $opt "${tempDir}/com.apple.NetBootClientHelper.plist" "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
    /bin/chmod 644 "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
    # finally, make sure it isn't disabled...
    /usr/libex
    # update progress information
    echo "${progressPrefix}_creatingImage_"
    if [ -e "${installSource}/BaseSystem.dmg" ]; then
    size=$2
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
    echo "Creating disk image (Size: $size MB)"
    fi
    /usr/bin/hdiutil create "$destPath/$dmgTarget" -megabytes $size -volname "${dmgVolName}" -uid 0 -gid 80 -mode 1775 -layout "SPUD" -fs "$destVolFSType" -stretch 500g -ov -puppetstrings || errExit
    echo "${progressPrefix}_copyingSource_"
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
    echo "Attaching disk image"
    fi
    /usr/bin/hdiutil attach "${destPath}/${dmgTarget}.dmg" -owners on -nobrowse -noautoopen -mountpoint "${mountPoint}" -quiet || errExit
    # Copy source Volume base system to
    /usr/bin/ditto $debug_opt "${installSource}" "${mountPoint}" || errExit
    else
    echo "This does not appear to be a Mac OS X Install DVD."
    errExit
    fi
    # If adding any additional packages or scripts
    if [ -e "${1}/OSInstall.collection" ]; then
    /usr/bin/ditto $debug_opt "${1}/OSInstall.collection" "${mountPoint}/Packages/OSInstall.collection" || errExit
    /usr/sbin/chown root:wheel "${mountPoint}/Packages/OSInstall.collection"
    # If adding any additional packages
    if [ -e "${1}/additionalPackages.txt" ]; then
    CopyPackagesWithDestinationsFromFile "${1}/additionalPackages.txt" || errExit
    fi
    # If adding any scripts
    if [ -e "${1}/additionalScripts.txt" ]; then
    InstallScriptsFromFile "${1}" "${1}/additionalScripts.txt" "${mountPoint}/Packages" || errExit
    fi
    fi
    # If it exists, install the partition data onto the install image
    ProcessAutoPartition "${1}" || errExit
    # If it exists, install minstallconfig.xml (AutoInstall data) onto the install image
    ProcessMinInstall "${1}" || errExit
    # update progress information
    echo "${progressPrefix}_buildingBooter_"
    # Copy kernel and boot loader
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Preparing the kernel and boot loader for the boot image"
    fi
    # make sure this doesn't exist
    if [ -e "${destPath}/i386" ]; then
    /bin/rm -rf "${destPath}/i386"
    fi
    /bin/mkdir -p $debug_opt "${destPath}/i386/x86_64" || errExit
    # copy these directly off the install media
    /usr/bin/ditto $debug_opt "${installSource}/boot.efi" "${destPath}/i386/booter" || errExit
    /usr/bin/chflags nohidden "${destPath}/i386/booter"
    # Grab the relevant portion of the com.apple.Boot.plist
    kernelFlags=`/usr/libexec/PlistBuddy -c "print :'Kernel Flags'" "${installSource}/Library/Preferences/SystemConfiguration/com.apple.Boot.plist"`
    /usr/libexec/PlistBuddy -c "add :'Kernel Flags' string ${kernelFlags}" "${destPath}/i386/com.apple.Boot.plist" > /dev/null 2>&1
    /usr/bin/ditto $debug_opt "${installSource}/System/Library/CoreServices/PlatformSupport.plist" "${destPath}/i386/PlatformSupport.plist" || errExit
    # extract the kernel & kernelcache for the boot shell
    /usr/bin/lipo -extract i386 "${mountPoint}/kernelcache" -output "${destPath}/i386/kernelcache" || errExit
    /usr/bin/lipo -extract x86_64 "${mountPoint}/kernelcache" -output "${destPath}/i386/x86_64/kernelcache" || errExit
    # Apply choice changes, if any
    if [ -e "${1}/MacOSXInstaller.choiceChanges" ]; then
    echo "Copy over package choice selection."
    /usr/bin/ditto $debug_opt "${1}/MacOSXInstaller.choiceChanges" "${mountPoint}/Packages/Extras/MacOSXInstaller.choiceChanges"
    fi
    # update progress information
    echo "${progressPrefix}_finishingUp_"
    # perform the final cleanup
    PostFlightDestination "${1}" "$destPath" || errExit
    rrExit
    # Apply choice changes, if any
    if [ -e "${1}/MacOSXInstaller.choiceChanges" ]; then
    echo "Copy over package choice selection."
    /usr/bin/ditto $debug_opt "${1}/MacOSXInstaller.choiceChanges" "${mountPoint}/Packages/Extras/MacOSXInstaller.choiceChanges"
    fi
    # update progress information
    echo "${progressPrefix}_finishingUp_"
    # perform the final cleanup
    PostFlightDestination "${1}" "$destPath" || errExit
    tDestination "${1}" "$destPath" || errExit
    errExit
    Vol/private/tmp" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Cleaning out /private/tmp on $1"
    fi
    /bin/rm -r $opt "$srcVol/private/tmp/*"
    fi
    if [ -d "$srcVol/private/var/tmp" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Cleaning out /private/var/tmp on $1"
    fi
    /bin/rm -r $opt "$srcVol/private/var/tmp/*"
    fi
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Cleaning out devices and volumes on $1"
    fi
    if [ -d "$srcVol/Volumes" ]; then
    /bin/rm -r $opt "$srcVol/Volumes/*"
    fi
    if [ -d "$srcVol/dev" ]; then
    /bin/rm $opt "$srcVol/dev/*"
    fi
    if [ -d "$srcVol/private/var/run" ]; then
    /bin/rm -r $opt "$srcVol/private/var/run/*"
    fi
    # Copy kernel and build the kext cache on the boot image
    PrepareKernelAndKextCache()
    local srcDir="$1"
    local destDir="$2"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    Stopping image creation.
    Terminating script!
    Image creation failed.

  • System Image Utility "volume on diskxsx failed to mount"

    I've been trying to create a NetRestore image using System Image Utility (SIU) for the past couple of days, but no matter what I do it fails.  I was oringally using OSX 10.8.4, but have now upgraded to 10.8.5.
    After reading through the logs, I can see SIU fails whilst it's trying to mount the volume.  Has anyone else had this issue, and if so, were you able to fix it?
    I also noticed the "Create image of /Volume/Macintosh HD/" function stops at 48% instead of 100%.  Is that normal?
    Below is a copy of the log that SIU produced.
    Starting image creation.
    Workflow Started (2013-09-24 08:41:36 +0100)
    OS X Server 10.8.5 (12F37), System Image Utility 10.8.3 (624)
    Starting action: Define Image Source (1.4)
    Finished running action: Define Image Source
    Starting action: Create Image (1.7.2)
    Starting image creation process...
    Create NetRestore Image
    Initiating NetRestore from installed volume.
    progressPrefix="_progress"
    ++ progressPrefix=_progress
    scriptsDebugKey="DEBUG"
    ++ scriptsDebugKey=DEBUG
    imageIsUDIFKey="1"
    ++ imageIsUDIFKey=1
    imageFormatKey="UDZO"
    ++ imageFormatKey=UDZO
    mountPoint=""
    ++ mountPoint=
    ownershipInfoKey="501:20"
    ++ ownershipInfoKey=501:20
    blockCopyDeviceKey="0"
    ++ blockCopyDeviceKey=0
    dmgTarget="NetInstall"
    ++ dmgTarget=NetInstall
    potentialRecoveryDevice="disk4s3"
    ++ potentialRecoveryDevice=disk4s3
    asrSource="ASRInstall.pkg"
    ++ asrSource=ASRInstall.pkg
    destPath="/Users/morgan/Desktop/NetRestore of Macintosh HD_2.nbi"
    ++ destPath='/Users/morgan/Desktop/NetRestore of Macintosh HD_2.nbi'
    skipReorderingKey="0"
    ++ skipReorderingKey=0
    sourceVol="/Volumes/Macintosh HD"
    ++ sourceVol='/Volumes/Macintosh HD'
    postInstallHelperKey="1"
    ++ postInstallHelperKey=1
    . "${1}/createCommon.sh"
    + . /tmp/niutemp.rDvE48RI/createCommon.sh
    # createCommon.sh
    # Common functionality for the Image creation process.
    # sourced in by the various SIU scripts
    # Copyright © 2007-2012 Apple Inc. All rights reserved.
    # Using dscl, create a user account
    AddLocalUser()
    # $1 volume whose local node database to modify
    # $2 long name
    # $3 short name
    # $4 isAdminUser key
    # $5 password data
    # $6 password hint
    # $7 user picture path
    # $8 Language string
    local databasePath="/Local/Default/Users/${3}"
    local targetVol="${1}"
    # Find a free UID between 501 and 599
    for ((i=501; i<600; i++)); do
    output=`/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -search /Local/Default/Users UniqueID $i`
    # If there is already an account dscl returns it, so we're looking for an empty return value.
    if [ "$output" == "" ]; then
    break
    fi
    done
    # Create the user record
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -create $databasePath
    if [ $? != 0 ]; then
    echo "Failed to create '${databasePath}'."
    return 1
    fi
    # Add long name
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath RealName "${2}"
    if [ $? != 0 ]; then
    echo "Failed to set the RealName."
    return 1
    fi
    # Set up the users group information
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath PrimaryGroupID 20
    if [ $? != 0 ]; then
    echo "Failed to set the PrimaryGroupID."
    return 1
    fi
    # Add some additional stuff if the user is an admin
    if [ "${4}" == 1 ]; then
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append "/Local/Default/Groups/admin" GroupMembership "${3}"
    if [ $? != 0 ]; then
    echo "Failed to add the user to the admin group."
    return 1
    fi
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append "/Local/Default/Groups/_appserveradm" GroupMembership "${3}"
    if [ $? != 0 ]; then
    echo "Failed to add the user to the _appserveradm group."
    return 1
    fi
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append "/Local/Default/Groups/_appserverusr" GroupMembership "${3}"
    if [ $? != 0 ]; then
    echo "Failed to add the user to the _appserverusr group."
    return 1
    fi
    fi
    # Add UniqueID
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath UniqueID ${i}
    if [ $? != 0 ]; then
    echo "Failed to set the UniqueID."
    return 1
    fi
    # Add Home Directory entry
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath NFSHomeDirectory /Users/${3}
    if [ $? != 0 ]; then
    echo "Failed to set the NFSHomeDirectory."
    fi
    if [ "${6}" != "" ]; then
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath AuthenticationHint "${6}"
    if [ $? != 0 ]; then
    echo "Failed to set the AuthenticationHint."
    return 1
    fi
    fi
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath picture "${7}"
    if [ $? != 0 ]; then
    echo "Failed to set the picture."
    return 1
    fi
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -passwd $databasePath "${5}"
    if [ $? != 0 ]; then
    echo "Failed to set the passwd."
    return 1
    fi
    # Add shell
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath UserShell "/bin/bash"
    if [ $? != 0 ]; then
    echo "Failed to set the UserShell."
    return 1
    fi
    # Create Home directory
    if [ -e "/System/Library/User Template/${8}.lproj/" ]; then
    /usr/bin/ditto "/System/Library/User Template/${8}.lproj/" "${targetVol}/Users/${3}"
    else
    /usr/bin/ditto "/System/Library/User Template/English.lproj/" "${targetVol}/Users/${3}"
    fi
    if [ $? != 0 ]; then
    echo "Failed to copy the User Template."
    return 1
    fi
    /usr/sbin/chown -R $i:$i "${targetVol}/Users/${3}"
    if [ $? != 0 ]; then
    echo "Failed to set ownership on the User folder."
    return 1
    fi
    # Copies a list of files (full paths contained in the file at $1) from source to the path specified in $2
    CopyEntriesFromFileToPath()
    local theFile="$1"
    local theDest="$2"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    while read FILE
    do
    if [ -e "${FILE}" ]; then
    local leafName=`basename "${FILE}"`
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Copying ${FILE}."
    fi
    /usr/bin/ditto $opt "${FILE}" "${theDest}/${leafName}" || return 1
    fi
    done < "${theFile}"
    return 0
    # Copies a list of packages (full path, destination pairs contained in the file at $1) from source to .../System/Installation/Packages/
    CopyPackagesWithDestinationsFromFile()
    local theFile="$1"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    while read FILE
    do
    if [ -e "${FILE}" ]; then
    local leafName=`basename "${FILE}"`
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Copying ${FILE}."
    fi
    read SUB_PATH
    /usr/bin/ditto $opt "${FILE}" "${mountPoint}/Packages/${SUB_PATH}${leafName}" || return 1
    fi
    done < "${theFile}"
    return 0
    # Create an installer package in ${1} wrapping the supplied script ${2}
    CreateInstallPackageForScript()
    local tempDir="$1"
    local scriptPath="$2"
    local scriptName=`basename "${scriptPath}"`
    local entryDir=`pwd`
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Create installer for script ${scriptName}"
    opt="-v"
    fi
    # shouldn't exist on entry...
    if [ -e "${tempDir}/emptyDir" ]; then
    /bin/rm -rf "${tempDir}/emptyDir"
    fi
    # make some directories to work in
    /bin/mkdir $opt -p "${tempDir}/${scriptName}.pkg/Contents/Resources" || return 1
    /bin/mkdir $opt "${tempDir}/emptyDir" || return 1
    # Create Archive.pax.gz
    cd "${tempDir}/emptyDir"
    /bin/pax -w -x cpio -f "${tempDir}/${scriptName}.pkg/Contents/Archive.pax" .
    /usr/bin/gzip "${tempDir}/${scriptName}.pkg/Contents/Archive.pax"
    cd "${entryDir}"
    # Create the Archive.bom file
    /usr/bin/mkbom "${tempDir}/emptyDir/" "${tempDir}/${scriptName}.pkg/Contents/Archive.bom" || return 1
    # Create the Info.plist
    /bin/cat > "${tempDir}/${scriptName}.pkg/Contents/Info.plist" << END
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>CFBundleIdentifier</key>
    <string>com.apple.SystemImageUtility.${scriptName}</string>
    <key>CFBundleShortVersionString</key>
    <string>1</string>
    <key>IFMajorVersion</key>
    <integer>1</integer>
    <key>IFMinorVersion</key>
    <integer>0</integer>
    <key>IFPkgFlagDefaultLocation</key>
    <string>/tmp</string>
    <key>IFPkgFlagInstallFat</key>
    <false/>
    <key>IFPkgFlagIsRequired</key>
    <false/>
    <key>IFPkgFormatVersion</key>
    <real>0.10000000149011612</real>
    </dict>
    </plist>
    END
    echo "pkmkrpkg1" > "${tempDir}/${scriptName}.pkg/Contents/PkgInfo"
    echo "major: 1\nminor: 0" > "${tempDir}/${scriptName}.pkg/Contents/Resources/package_version"
    # Copy the script
    /bin/cp "$scriptPath" "${tempDir}/${scriptName}.pkg/Contents/Resources/postflight"
    # clean up
    /bin/rm -r "${tempDir}/emptyDir"
    return 0
    # Validate or create the requested directory
    CreateOrValidatePath()
    local targetDir="$1"
    if [ ! -d "${targetDir}" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Creating working path at ${targetDir}"
    fi
    /bin/mkdir -p "${targetDir}" || return 1
    fi
    # If any exist, apply any user accounts
    CreateUserAccounts()
    # $1 volume whose local node database to modify
    local count="${#userFullName[*]}"
    local targetVol="${1}"
    if [ $count -gt 0 ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Adding $count user account(s) to the image"
    fi
    for ((index=0; index<$count; index++)); do
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Adding user ${userFullName[$index]}"
    fi
    #lay down user here
    AddLocalUser "${targetVol}" "${userFullName[$index]}" "${userUnixName[$index]}" "${userIsAdmin[$index]}" "${userPassword[$index]}" "${userPassHint[$index]}" "${userImagePath[$index]}" "${userLanguage[$index]}"
    if [ $? != 0 ]; then
    echo "Failed to create the User '${userUnixName[$index]}'."
    return 1
    fi
    #suppress the Apple ID request
    DisableAppleIDRequestForUser "${targetVol}" "${userUnixName[$index]}"
    done
    # "touch"
    /usr/bin/touch "${targetVol}/private/var/db/.AppleSetupDone"
    /usr/bin/touch "${targetVol}/Library/Receipts/.SetupRegComplete"
    fi
    # retry the hdiutil detach until we either time out or it succeeds
    retry_hdiutil_detach()
    local mount_point="${1}"
    local tries=0
    local forceAt=0
    local limit=24
    local opt=""
    forceAt=$(($limit - 1))
    while [ $tries -lt $limit ]; do
    tries=$(( tries + 1 ))
    /bin/sleep 5
    echo "Attempting to detach the disk image again..."
    /usr/bin/hdiutil detach "${mount_point}" $opt
    if [ $? -ne 0 ]; then
    # Dump a list of any still open files on the mountPoint
    if [ "${scriptsDebugKey}" == "DEBUG" ]; then
    /usr/sbin/lsof +fg "${mount_point}"
    fi
    if [ $tries -eq $forceAt ]; then
    echo "Failed to detach disk image at '${mount_point}' normally, adding -force."
    opt="-force"
    fi
    if [ $tries -eq $limit ]; then
    echo "Failed to detach disk image at '${mount_point}'."
    exit 1
    fi
    else
    tries=$limit
    fi
    done
    # Create the dyld shared cache files
    DetachAndRemoveMount()
    local theMount="${1}"
    local mountLoc=`mount | grep "${theMount}"`
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Detaching disk image"
    # Dump a list of any still open files on the mountPoint
    if [ "${scriptsDebugKey}" == "DEBUG" ]; then
    /usr/sbin/lsof +fg "${theMount}"
    fi
    fi
    # Finally detach the mount (if it's actually mounted) and dispose the mountPoint directory
    if [ "${mountLoc}" != "" ]; then
    /usr/bin/hdiutil detach "${theMount}" || retry_hdiutil_detach "${theMount}" || return 1
    fi
    /bin/rmdir "${theMount}" || return 1
    return 0
    # Turn off the Apple ID request that happens on first boot after installing the OS
    DisableAppleIDRequestForUser()
    local targetUserLib="${1}/Users/${2}/Library"
    # Only do this if the file doesn't exist
    if [ ! -e "${targetUserLib}/Preferences/com.apple.SetupAssistant.plist" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Disabling Apple ID request for user '${2}'"
    fi
    /usr/libexec/PlistBuddy -c "Add :DidSeeCloudSetup bool 1" "${targetUserLib}/Preferences/com.apple.SetupAssistant.plist" > /dev/null 2>&1
    /usr/libexec/PlistBuddy -c "Add :LastSeenCloudProductVersion string 10.8" "${targetUserLib}/Preferences/com.apple.SetupAssistant.plist" > /dev/null 2>&1
    fi
    return 0
    # If the pieces exist, enable remote access for the shell image
    EnableRemoteAccess()
    local srcVol="${1}"
    local opt=""
    if [ -e "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Enabling shell image remote access support"
    opt="-v"
    fi
    # install some things (again which aren't part of BaseSystem) needed for remote ASR installs
    /usr/bin/ditto $opt "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" "${mountPoint}/usr/lib/pam/pam_serialnumber.so.2" || return 1
    if [ -e "${srcVol}/usr/sbin/installer" ]; then
    /usr/bin/ditto $opt "${srcVol}/usr/sbin/installer" "${mountPoint}/usr/sbin/installer" || return 1
    fi
    # copy the sshd config and add our keys to the end of it
    if [ -e "${srcVol}/etc/sshd_config" ]; then
    /bin/cat "${srcVol}/etc/sshd_config" - > "${mountPoint}/etc/sshd_config" << END
    HostKey /private/var/tmp/ssh_host_key
    HostKey /private/var/tmp/ssh_host_rsa_key
    HostKey /private/var/tmp/ssh_host_dsa_key
    END
    fi
    fi
    return 0
    # If it exists, install the sharing names and/or directory binding support to the install image
    HandleNetBootClientHelper()
    local tempDir="${1}"
    local targetVol="${2}"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    if [ -e  "${tempDir}/bindingNames.plist" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Directory Service binding information"
    fi
    /usr/bin/ditto $opt "${tempDir}/bindingNames.plist" "${targetVol}/etc/bindingNames.plist" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/etc/bindingNames.plist"
    /bin/chmod 644 "${targetVol}/etc/bindingNames.plist"
    fi
    if [ -e  "${tempDir}/sharingNames.plist" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Sharing Names support"
    fi
    /usr/bin/ditto $opt "${tempDir}/sharingNames.plist" "${targetVol}/etc/sharingNames.plist" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/etc/sharingNames.plist"
    /bin/chmod 644 "${targetVol}/etc/sharingNames.plist"
    fi
    if [ -e  "${tempDir}/NetBootClientHelper" ]; then
    /usr/bin/ditto $opt "${tempDir}/NetBootClientHelper" "${targetVol}/usr/sbin/NetBootClientHelper" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/usr/sbin/NetBootClientHelper"
    /bin/chmod 555 "${targetVol}/usr/sbin/NetBootClientHelper"
    /usr/bin/ditto $opt "${tempDir}/com.apple.NetBootClientHelper.plist" "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
    /bin/chmod 644 "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
    # finally, make sure it isn't disabled...
    /usr/libexec/PlistBuddy -c "Delete :com.apple.NetBootClientHelper" "${targetVol}/var/db/launchd.db/com.apple.launchd/overrides.plist" > /dev/null 2>&1
    fi
    return 0
    # If any exist, install configuration profiles to the install image
    InstallConfigurationProfiles()
    local tempDir="${1}"
    local targetVol="${2}"
    local profilesDir="${targetVol}/var/db/ConfigurationProfiles"
    if [ -e  "${tempDir}/configProfiles.txt" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Configuration Profiles"
    fi
    /bin/mkdir -p "${profilesDir}/Setup" || return 1
    # Make sure the perms are correct
    /usr/sbin/chown root:wheel "${profilesDir}"
    /bin/chmod 755 "${profilesDir}"
    /usr/sbin/chown root:wheel "${profilesDir}/Setup"
    /bin/chmod 755 "${profilesDir}/Setup"
    /usr/bin/touch "${profilesDir}/.profilesAreInstalled"
    CopyEntriesFromFileToPath "${tempDir}/configProfiles.txt" "${profilesDir}/Setup" || return 1
    # Enable MCX debugging
    if [ 1 == 1 ]; then
    if [ -e  "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" ]; then
    /usr/libexec/PlistBuddy -c "Delete :debugOutput" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
    /usr/libexec/PlistBuddy -c "Delete :collateLogs" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
    fi
    /usr/libexec/PlistBuddy -c "Add :debugOutput string -2" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
    /usr/libexec/PlistBuddy -c "Add :collateLogs string 1" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
    fi
    fi
    # Converts a list of scripts (full paths contained in the file at $1) into packages in $3
    InstallScriptsFromFile()
    local tempDir="${1}"
    local theFile="${2}"
    local targetDir="${3}"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Converting scripts into install packages"
    opt="-v"
    fi
    while read FILE
    do
    if [ -e "${FILE}" ]; then
    # make an installer package out of the script
    CreateInstallPackageForScript "$tempDir" "${FILE}" || return 1
    # copy the resulting package to the Packages directory
    local leafName=`basename "${FILE}"`
    /usr/bin/ditto $opt "${tempDir}/${leafName}.pkg" "${targetDir}/${leafName}.pkg" || return 1
    # clean up
    /bin/rm -r "${tempDir}/${leafName}.pkg"
    fi
    done < "${theFile}"
    return 0
    # Prepare the source by deleting stuff we don't want to copy if sourcing a volume
    PostFlightDestination()
    local tempDir="${1}"
    local destDir="${2}"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Performing post install cleanup"
    opt="-v"
    fi
    # delete the DS indices to force reindexing...
    if [ -e "${mountPoint}/var/db/dslocal/indices/Default/index" ]; then
    /bin/rm $opt "${mountPoint}/var/db/dslocal/indices/Default/index"
    fi
    # detach the disk and remove the mount folder
    DetachAndRemoveMount "${mountPoint}"
    if [ $? != 0 ]; then
    echo "Failed to detach and clean up the mount at '${mountPoint}'."
    return 1
    fi
    echo "Correcting permissions. ${ownershipInfoKey} $destDir"
    /usr/sbin/chown -R "${ownershipInfoKey}" "$destDir"
    # Prepare the source by deleting stuff we don't want to copy if sourcing a volume
    PreCleanSource()
    local srcVol="$1"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    if [ -e "$srcVol/private/var/vm/swapfile*" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Removing swapfiles on $1"
    fi
    /bin/rm $opt "$srcVol/private/var/vm/swapfile*"
    fi
    if [ -e "$srcVol/private/var/vm/sleepimage" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Removing sleepimage on $1"
    fi
    /bin/rm $opt "$srcVol/private/var/vm/sleepimage"
    fi
    if [ -d "$srcVol/private/tmp" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Cleaning out /private/tmp on $1"
    fi
    /bin/rm -r $opt "$srcVol/private/tmp/*" > /dev/null 2>&1
    fi
    if [ -d "$srcVol/private/var/tmp" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Cleaning out /private/var/tmp on $1"
    fi
    /bin/rm -r $opt "$srcVol/private/var/tmp/*" > /dev/null 2>&1
    fi
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Cleaning out devices and volumes on $1"
    fi
    if [ -d "$srcVol/Volumes" ]; then
    /bin/rm -r $opt "$srcVol/Volumes/*" > /dev/null 2>&1
    fi
    if [ -d "$srcVol/dev" ]; then
    /bin/rm $opt "$srcVol/dev/*" > /dev/null 2>&1
    fi
    if [ -d "$srcVol/private/var/run" ]; then
    /bin/rm -r $opt "$srcVol/private/var/run/*" > /dev/null 2>&1
    fi
    # Copy kernel and build the kext cache on the boot image
    PrepareKernelAndKextCache()
    local srcDir="$1"
    local destDir="$2"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Preparing the kernel and kext cache for the boot image"
    opt="-v"
    fi
    # Insure the kext cache on our source volume (the boot shell) is up to date
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Updating kext cache on source volume"
    fi
    /usr/sbin/kextcache -update-volume "${srcDir}" || return 1
    # Copy the i386 and, if it exists, the x86_64 architecture
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing the kext cache to the boot image"
    fi
    # make sure this doesn't exist
    if [ -e "${destDir}/i386" ]; then
    /bin/rm -rf "${destDir}/i386"
    fi
    # Install kextcaches to the nbi folder
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Creating a kernelcache for the boot shell"
    fi
    /bin/mkdir -p $opt "${destDir}/i386/x86_64" || return 1
    /usr/sbin/kextcache -arch x86_64 -L -N -S -z -K "${srcDir}/mach_kernel" -c "${destDir}/i386/x86_64/kernelcache" "${srcDir}/System/Library/Extensions" || return 1
    # Create the i386 and x86_64 boot loaders on the boot image
    PrepareBootLoader()
    local srcVol="$1"
    local destDir="$2"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Preparing boot loader"
    opt="-v"
    fi
    # Copy the boot.efi to the booter shell
    if [ -e "${mountPoint}/System/Library/CoreServices/boot.efi" ]; then
    /usr/bin/ditto $opt "${mountPoint}/System/Library/CoreServices/boot.efi" "${destDir}/i386/booter" || return 1
    else
    /usr/bin/ditto $opt "${srcVol}/System/Library/CoreServices/boot.efi" "${destDir}/i386/booter" || return 1
    fi
    # Unlock the file so we can change its owner later
    chflags nouchg "${destDir}/i386/booter"
    # Copy the PlatformSupport.plist file
    if [ -e "${mountPoint}/System/Library/CoreServices/PlatformSupport.plist" ]; then
    /usr/bin/ditto $opt "${mountPoint}/System/Library/CoreServices/PlatformSupport.plist" "${destDir}/i386/PlatformSupport.plist" || return 1
    else
    /usr/bin/ditto $opt "${srcVol}/System/Library/CoreServices/PlatformSupport.plist" "${destDir}/i386/PlatformSupport.plist" || return 1
    fi
    # If it exists, install the partitioning application and data onto the install image
    ProcessAutoPartition()
    local tempDir="$1"
    local opt=""
    local targetDir=""
    if [ -e "$tempDir/PartitionInfo.plist" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    # Determine if this is an install source, or a restore source
    if [ -d "${mountPoint}/Packages" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Partitioning application and data to install image"
    fi
    targetDir="${mountPoint}/Packages"
    elif [ -d "${mountPoint}/System/Installation/Packages" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Partitioning application and data to restore image"
    fi
    targetDir="${mountPoint}/System/Installation/Packages"
    else
    echo "There doesn't appear to be either an install or restore source mounted at ${mountPoint}"
    return 1
    fi
    # Create the Extras directory if it doesn't exist
    if [ ! -d "${targetDir}/Extras" ]; then
    /bin/mkdir "${targetDir}/Extras"
    fi
    targetDir="${targetDir}/Extras"
    /usr/bin/ditto $opt "$tempDir/PartitionInfo.plist" "${targetDir}/PartitionInfo.plist" || return 1
    /usr/bin/ditto $opt "$tempDir/AutoPartition.app" "${targetDir}/AutoPartition.app" || return 1
    fi
    return 0
    # If it exists, install the minstallconfig.xml onto the install image
    ProcessMinInstall()
    local tempDir="$1"
    local opt=""
    local targetDir="${mountPoint}/Packages/Extras"
    if [ -e "$tempDir/minstallconfig.xml" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing minstallconfig.xml to install image"
    opt="-v"
    fi
    /usr/bin/ditto $opt "$tempDir/minstallconfig.xml" "${targetDir}/minstallconfig.xml" || return 1
    /usr/sbin/chown root:wheel "${targetDir}/minstallconfig.xml"
    /bin/chmod 644 "${targetDir}/minstallconfig.xml"
    fi
    return 0
    # untar the OSInstall.mpkg so it can be modified
    untarOSInstallMpkg()
    local tempDir="$1"
    local opt=""
    # we might have already done this, so check for it first
    if [ ! -d "${tempDir}/OSInstall_pkg" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "uncompressing OSInstall.mpkg"
    opt="-v"
    fi
    /bin/mkdir "${tempDir}/OSInstall_pkg"
    cd "${tempDir}/OSInstall_pkg"
    /usr/bin/xar $opt -xf "${mountPoint}/System/Installation/Packages/OSInstall.mpkg"
    # make Distribution writeable
    /bin/chmod 777 "${tempDir}/OSInstall_pkg"
    /bin/chmod 666 "${tempDir}/OSInstall_pkg/Distribution"
    fi
    # Make a tempdir to mount the image on
    mountPoint=`mktemp -d "/tmp/mnt.XXXXXXXX"`
    mktemp -d "/tmp/mnt.XXXXXXXX"
    ++ mktemp -d /tmp/mnt.XXXXXXXX
    + mountPoint=/tmp/mnt.7E4iD6mQ
    sourceMount=""
    + sourceMount=
    crfsErrExit()
    echo "Execution of '`basename \"${0}\"`' failed. Cleaning up."
    # detach the disk and remove the mount folder
    DetachAndRemoveMount "${mountPoint}"
    # detach the mounted source, if necessary
    if [ "${sourceMount}" != "" ] ; then
    DetachAndRemoveMount "${sourceMount}"
    fi
    # Remove the items we created
    /bin/rm -r "$destPath/i386" > /dev/null 2>&1
    /bin/rm "$destPath/$dmgTarget.dmg" > /dev/null 2>&1
    /bin/rm "$destPath/System.dmg" > /dev/null 2>&1
    # Finally, remove the directory IF empty
    /bin/rmdir "$destPath"
    exit 1
    InstallNetBootClientHelper()
    local tempDir="${1}"
    local destDir="${mountPoint}/Packages/Extras"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    if [ -e "${tempDir}/bindingNames.plist" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Directory Service binding information"
    fi
    /usr/bin/ditto $opt "${tempDir}/bindingNames.plist" "${destDir}/bindingNames.plist" || return 1
    /usr/sbin/chown root:wheel "${destDir}/bindingNames.plist"
    /bin/chmod 644 "${destDir}/bindingNames.plist"
    fi
    if [ -e "${tempDir}/sharingNames.plist" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Sharing Names support"
    fi
    /usr/bin/ditto $opt "${tempDir}/sharingNames.plist" "${destDir}/sharingNames.plist" || return 1
    /usr/sbin/chown root:wheel "${destDir}/sharingNames.plist"
    /bin/chmod 644 "${destDir}/sharingNames.plist"
    fi
    # This is required, make sure it's here
    /usr/bin/ditto $opt "${tempDir}/NetBootClientHelper" "${destDir}/NetBootClientHelper" || return 1
    /usr/sbin/chown root:wheel "${destDir}/NetBootClientHelper"
    /bin/chmod 555 "${destDir}/NetBootClientHelper"
    /usr/bin/ditto $opt "${tempDir}/com.apple.NetBootClientHelper.plist" "${destDir}/com.apple.NetBootClientHelper.plist" || return 1
    /usr/sbin/chown root:wheel "${destDir}/com.apple.NetBootClientHelper.plist"
    /bin/chmod 644 "${destDir}/com.apple.NetBootClientHelper.plist"
    /usr/bin/ditto $opt "${tempDir}/installClientHelper.sh" "${mountPoint}/var/tmp/niu/postinstall/installClientHelper.sh" || return 1
    /usr/sbin/chown root:wheel "${mountPoint}/var/tmp/niu/postinstall/installClientHelper.sh"
    /bin/chmod 555 "${mountPoint}/var/tmp/niu/postinstall/installClientHelper.sh"
    return 0
    InstallBaseSystemToShell()
    local baseSystemDMG="${1}"
    local shellMount="${2}"
    local tempDir=`/usr/bin/dirname "${1}"`
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
    opt="-v"
    echo "Copying Base System bits to the boot shell image"
    fi
    baseMount=`mktemp -d "/tmp/mnt_bs.XXXXXXXX"`
    /usr/bin/hdiutil attach "${baseSystemDMG}" -noverify -owners on -nobrowse -noautoopen -mountpoint "${baseMount}" -quiet || return 1
    # Copy the boot.efi and SystemVersion.plist out to the shell dmg
    /usr/bin/ditto $opt "${baseMount}/System/Library/CoreServices/boot.efi" "${shellMount}/boot.efi" || return 1
    chflags nouchg "${shellMount}/boot.efi"
    /bin/mkdir -p "${shellMount}/usr/standalone/i386" || return 1
    /bin/ln "${shellMount}/boot.efi" "${shellMount}/usr/standalone/i386/boot.efi" || return 1
    /bin/mkdir -p "${shellMount}/System/Library/CoreServices" || return 1
    /bin/ln "${shellMount}/boot.efi" "${shellMount}/System/Library/CoreServices/boot.efi" || return 1
    /usr/bin/ditto $opt "${baseMount}/System/Library/CoreServices/SystemVersion.plist" "${shellMount}/System/Library/CoreServices/SystemVersion.plist" || return 1
    # stash some things we need for later
    /usr/bin/ditto $opt "${baseMount}/System/Library/Caches/com.apple.kext.caches/Startup/kernelcache" "${tempDir}/kernelcache" || return 1
    /usr/bin/ditto $opt "${baseMount}/System/Library/CoreServices/com.apple.recovery.boot/PlatformSuppo rt.plist" "${tempDir}/PlatformSupport.plist" || return 1
    # Clean up
    /usr/bin/hdiutil detach "${baseMount}" || retry_hdiutil_detach "${baseMount}" || return 1
    /bin/rmdir "${baseMount}"
    theDmg=`basename "${baseSystemDMG}"`
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
    echo "Copying ${theDmg} to the boot shell."
    fi
    /usr/bin/ditto $debug_opt "${baseSystemDMG}" "${shellMount}/${theDmg}"
    return 0
    # Set up for script debugging
    debug_opt=""
    + debug_opt=
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
    debug_opt="-v"
    fi
    + '[' DEBUG == VERBOSE -o DEBUG == DEBUG ']'
    + debug_opt=-v
    # Prepare the destination
    CreateOrValidatePath "${destPath}" || crfsErrExit
    + CreateOrValidatePath '/Users/morgan/Desktop/NetRestore of Macintosh HD_2.nbi'
    + local 'targetDir=/Users/morgan/Desktop/NetRestore of Macintosh HD_2.nbi'
    + '[' '!' -d '/Users/morgan/Desktop/NetRestore of Macintosh HD_2.nbi' ']'
    + '[' DEBUG == VERBOSE -o DEBUG == DEBUG ']'
    + echo 'Creating working path at /Users/morgan/Desktop/NetRestore of Macintosh HD_2.nbi'
    Creating working path at /Users/morgan/Desktop/NetRestore of Macintosh HD_2.nbi
    + /bin/mkdir -p '/Users/morgan/Desktop/NetRestore of Macintosh HD_2.nbi'
    # Source in our image building commands
    . "${1}/buildCommands.sh"
    + . /tmp/niutemp.rDvE48RI/buildCommands.sh
    '/System/Library/CoreServices/System Image Utility.app/Contents/Library/Automator/Create Image.action/Contents/Resources/asrFromVolume.sh' "/tmp/niutemp.rDvE48RI" "/Volumes/Macintosh HD" "System" || exit 1
    ++ '/System/Library/CoreServices/System Image Utility.app/Contents/Library/Automator/Create Image.action/Contents/Resources/asrFromVolume.sh' /tmp/niutemp.rDvE48RI '/Volumes/Macintosh HD' System
    progressPrefix="_progress"
    ++ progressPrefix=_progress
    scriptsDebugKey="DEBUG"
    ++ scriptsDebugKey=DEBUG
    imageIsUDIFKey="1"
    ++ imageIsUDIFKey=1
    imageFormatKey="UDZO"
    ++ imageFormatKey=UDZO
    mountPoint=""
    ++ mountPoint=
    ownershipInfoKey="501:20"
    ++ ownershipInfoKey=501:20
    blockCopyDeviceKey="0"
    ++ blockCopyDeviceKey=0
    dmgTarget="NetInstall"
    ++ dmgTarget=NetInstall
    potentialRecoveryDevice="disk4s3"
    ++ potentialRecoveryDevice=disk4s3
    asrSource="ASRInstall.pkg"
    ++ asrSource=ASRInstall.pkg
    destPath="/Users/morgan/Desktop/NetRestore of Macintosh HD_2.nbi"
    ++ destPath='/Users/morgan/Desktop/NetRestore of Macintosh HD_2.nbi'
    skipReorderingKey="0"
    ++ skipReorderingKey=0
    sourceVol="/Volumes/Macintosh HD"
    ++ sourceVol='/Volumes/Macintosh HD'
    postInstallHelperKey="1"
    ++ postInstallHelperKey=1
    # variables we will need
    created_dest="NO"
    + created_dest=NO
    afvErrExit()
    echo "Execution of '`basename \"${0}\"`' failed. Cleaning up."
    # detach the disk and remove the mount folder
    if [ "${created_dest}" == "YES" ]; then
    /bin/rm -r "${destPath}"
    fi
    exit 1
    retrieveBaseSystemDMG()
    local tempDir="${1}"
    local opt=""
    if [ "${potentialRecoveryDevice}" != "" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
    echo "Retrieving BaseSystem bits from Recovery HD"
    opt="-v"
    fi
    recoveryMount=`mktemp -d "/tmp/mnt_rp.XXXXXXXX"`
    /usr/sbin/diskutil mount readOnly -mountPoint "${recoveryMount}" "${potentialRecoveryDevice}" || return 1
    # Now make sure this is what was expected
    if [ -e "${recoveryMount}/com.apple.recovery.boot/BaseSystem.dmg" ]; then
    /usr/bin/ditto $opt "${recoveryMount}/com.apple.recovery.boot/BaseSystem.dmg" "${tempDir}/BaseSystem.dmg" || return 1
    /usr/bin/ditto $opt "${recoveryMount}/com.apple.recovery.boot/BaseSystem.chunklist" "${tempDir}/BaseSystem.chunklist"
    fi
    /usr/sbin/diskutil unmount "${potentialRecoveryDevice}" || return 1
    /bin/rmdir "${recoveryMount}"
    fi
    return 0
    # Insure the working path (dmg destination) exists
    if [ ! -d "${destPath}" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Creating working path at ${destPath}"
    fi
    /bin/mkdir -p "${destPath}" || afvErrExit
    created_dest="YES"
    fi
    + '[' '!' -d '/Users/morgan/Desktop/NetRestore of Macintosh HD_2.nbi' ']'
    # If the volume source is the boot drive we have an asr:// type source
    if [ "${2}" == "/" ]; then
    # Create an empty image to skip the ASR volume creation
    /usr/bin/touch "${destPath}/${3}.dmg"
    # Set aside the needed BaseSystem.dmg
    retrieveBaseSystemDMG "${1}" || afvErrExit
    fi
    + '[' '/Volumes/Macintosh HD' == / ']'
    # Look for an existing System.dmg
    if [ ! -e "${destPath}/${3}.dmg" ]; then
    # Didn't find one, so create it from volume source
    ${1}/makeNetRestoreFromItem.sh "${1}" "${2}" "${3}" || afvErrExit
    fi
    + '[' '!' -e '/Users/morgan/Desktop/NetRestore of Macintosh HD_2.nbi/System.dmg' ']'
    + /tmp/niutemp.rDvE48RI/makeNetRestoreFromItem.sh /tmp/niutemp.rDvE48RI '/Volumes/Macintosh HD' System
    progressPrefix="_progress"
    ++ progressPrefix=_progress
    scriptsDebugKey="DEBUG"
    ++ scriptsDebugKey=DEBUG
    imageIsUDIFKey="1"
    ++ imageIsUDIFKey=1
    imageFormatKey="UDZO"
    ++ imageFormatKey=UDZO
    mountPoint=""
    ++ mountPoint=
    ownershipInfoKey="501:20"
    ++ ownershipInfoKey=501:20
    blockCopyDeviceKey="0"
    ++ blockCopyDeviceKey=0
    dmgTarget="NetInstall"
    ++ dmgTarget=NetInstall
    potentialRecoveryDevice="disk4s3"
    ++ potentialRecoveryDevice=disk4s3
    asrSource="ASRInstall.pkg"
    ++ asrSource=ASRInstall.pkg
    destPath="/Users/morgan/Desktop/NetRestore of Macintosh HD_2.nbi"
    ++ destPath='/Users/morgan/Desktop/NetRestore of Macintosh HD_2.nbi'
    skipReorderingKey="0"
    ++ skipReorderingKey=0
    sourceVol="/Volumes/Macintosh HD"
    ++ sourceVol='/Volumes/Macintosh HD'
    postInstallHelperKey="1"
    ++ postInstallHelperKey=1
    . "${1}/createCommon.sh"
    + . /tmp/niutemp.rDvE48RI/createCommon.sh
    # createCommon.sh
    # Common functionality for the Image creation process.
    # sourced in by the various SIU scripts
    # Copyright © 2007-2012 Apple Inc. All rights reserved.
    # Using dscl, create a user account
    AddLocalUser()
    # $1 volume whose local node database to modify
    # $2 long name
    # $3 short name
    # $4 isAdminUser key
    # $5 password data
    # $6 password hint
    # $7 user picture path
    # $8 Language string
    local databasePath="/Local/Default/Users/${3}"
    local targetVol="${1}"
    # Find a free UID between 501 and 599
    for ((i=501; i<600; i++)); do
    output=`/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -search /Local/Default/Users UniqueID $i`
    # If there is already an account dscl returns it, so we're looking for an empty return value.
    if [ "$output" == "" ]; then
    break
    fi
    done
    # Create the user record
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -create $databasePath
    if [ $? != 0 ]; then
    echo "Failed to create '${databasePath}'."
    return 1
    fi
    # Add long name
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath RealName "${2}"
    if [ $? != 0 ]; then
    echo "Failed to set the RealName."
    return 1
    fi
    # Set up the users group information
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath PrimaryGroupID 20
    if [ $? != 0 ]; then
    echo "Failed to set the PrimaryGroupID."
    return 1
    fi
    # Add some additional stuff if the user is an admin
    if [ "${4}" == 1 ]; then
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append "/Local/Default/Groups/admin" GroupMembership "${3}"
    if [ $? != 0 ]; then
    echo "Failed to add the user to the admin group."
    return 1
    fi
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append "/Local/Default/Groups/_appserveradm" GroupMembership "${3}"
    if [ $? != 0 ]; then
    echo "Failed to add the user to the _appserveradm group."
    return 1
    fi
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append "/Local/Default/Groups/_appserverusr" GroupMembership "${3}"
    if [ $? != 0 ]; then
    echo "Failed to add the user to the _appserverusr group."
    return 1
    fi
    fi
    # Add UniqueID
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath UniqueID ${i}
    if [ $? != 0 ]; then
    echo "Failed to set the UniqueID."
    return 1
    fi
    # Add Home Directory entry
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath NFSHomeDirectory /Users/${3}
    if [ $? != 0 ]; then
    echo "Failed to set the NFSHomeDirectory."
    fi
    if [ "${6}" != "" ]; then
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath AuthenticationHint "${6}"
    if [ $? != 0 ]; then
    echo "Failed to set the AuthenticationHint."
    return 1
    fi
    fi
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath picture "${7}"
    if [ $? != 0 ]; then
    echo "Failed to set the picture."
    return 1
    fi
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -passwd $databasePath "${5}"
    if [ $? != 0 ]; then
    echo "Failed to set the passwd."
    return 1
    fi
    # Add shell
    /usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath UserShell "/bin/bash"
    if [ $? != 0 ]; then
    echo "Failed to set the UserShell."
    return 1
    fi
    # Create Home directory
    if [ -e "/System/Library/User Template/${8}.lproj/" ]; then
    /usr/bin/ditto "/System/Library/User Template/${8}.lproj/" "${targetVol}/Users/${3}"
    else
    /usr/bin/ditto "/System/Library/User Template/English.lproj/" "${targetVol}/Users/${3}"
    fi
    if [ $? != 0 ]; then
    echo "Failed to copy the User Template."
    return 1
    fi
    /usr/sbin/chown -R $i:$i "${targetVol}/Users/${3}"
    if [ $? != 0 ]; then
    echo "Failed to set ownership on the User folder."
    return 1
    fi
    # Copies a list of files (full paths contained in the file at $1) from source to the path specified in $2
    CopyEntriesFromFileToPath()
    local theFile="$1"
    local theDest="$2"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    while read FILE
    do
    if [ -e "${FILE}" ]; then
    local leafName=`basename "${FILE}"`
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Copying ${FILE}."
    fi
    /usr/bin/ditto $opt "${FILE}" "${theDest}/${leafName}" || return 1
    fi
    done < "${theFile}"
    return 0
    # Copies a list of packages (full path, destination pairs contained in the file at $1) from source to .../System/Installation/Packages/
    CopyPackagesWithDestinationsFromFile()
    local theFile="$1"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    while read FILE
    do
    if [ -e "${FILE}" ]; then
    local leafName=`basename "${FILE}"`
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Copying ${FILE}."
    fi
    read SUB_PATH
    /usr/bin/ditto $opt "${FILE}" "${mountPoint}/Packages/${SUB_PATH}${leafName}" || return 1
    fi
    done < "${theFile}"
    return 0
    # Create an installer package in ${1} wrapping the supplied script ${2}
    CreateInstallPackageForScript()
    local tempDir="$1"
    local scriptPath="$2"
    local scriptName=`basename "${scriptPath}"`
    local entryDir=`pwd`
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Create installer for script ${scriptName}"
    opt="-v"
    fi
    # shouldn't exist on entry...
    if [ -e "${tempDir}/emptyDir" ]; then
    /bin/rm -rf "${tempDir}/emptyDir"
    fi
    # make some directories to work in
    /bin/mkdir $opt -p "${tempDir}/${scriptName}.pkg/Contents/Resources" || return 1
    /bin/mkdir $opt "${tempDir}/emptyDir" || return 1
    # Create Archive.pax.gz
    cd "${tempDir}/emptyDir"
    /bin/pax -w -x cpio -f "${tempDir}/${scriptName}.pkg/Contents/Archive.pax" .
    /usr/bin/gzip "${tempDir}/${scriptName}.pkg/Contents/Archive.pax"
    cd "${entryDir}"
    # Create the Archive.bom file
    /usr/bin/mkbom "${tempDir}/emptyDir/" "${tempDir}/${scriptName}.pkg/Contents/Archive.bom" || return 1
    # Create the Info.plist
    /bin/cat > "${tempDir}/${scriptName}.pkg/Contents/Info.plist" << END
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>CFBundleIdentifier</key>
    <string>com.apple.SystemImageUtility.${scriptName}</string>
    <key>CFBundleShortVersionString</key>
    <string>1</string>
    <key>IFMajorVersion</key>
    <integer>1</integer>
    <key>IFMinorVersion</key>
    <integer>0</integer>
    <key>IFPkgFlagDefaultLocation</key>
    <string>/tmp</string>
    <key>IFPkgFlagInstallFat</key>
    <false/>
    <key>IFPkgFlagIsRequired</key>
    <false/>
    <key>IFPkgFormatVersion</key>
    <real>0.10000000149011612</real>
    </dict>
    </plist>
    END
    echo "pkmkrpkg1" > "${tempDir}/${scriptName}.pkg/Contents/PkgInfo"
    echo "major: 1\nminor: 0" > "${tempDir}/${scriptName}.pkg/Contents/Resources/package_version"
    # Copy the script
    /bin/cp "$scriptPath" "${tempDir}/${scriptName}.pkg/Contents/Resources/postflight"
    # clean up
    /bin/rm -r "${tempDir}/emptyDir"
    return 0
    # Validate or create the requested directory
    CreateOrValidatePath()
    local targetDir="$1"
    if [ ! -d "${targetDir}" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Creating working path at ${targetDir}"
    fi
    /bin/mkdir -p "${targetDir}" || return 1
    fi
    # If any exist, apply any user accounts
    CreateUserAccounts()
    # $1 volume whose local node database to modify
    local count="${#userFullName[*]}"
    local targetVol="${1}"
    if [ $count -gt 0 ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Adding $count user account(s) to the image"
    fi
    for ((index=0; index<$count; index++)); do
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Adding user ${userFullName[$index]}"
    fi
    #lay down user here
    AddLocalUser "${targetVol}" "${userFullName[$index]}" "${userUnixName[$index]}" "${userIsAdmin[$index]}" "${userPassword[$index]}" "${userPassHint[$index]}" "${userImagePath[$index]}" "${userLanguage[$index]}"
    if [ $? != 0 ]; then
    echo "Failed to create the User '${userUnixName[$index]}'."
    return 1
    fi
    #suppress the Apple ID request
    DisableAppleIDRequestForUser "${targetVol}" "${userUnixName[$index]}"
    done
    # "touch"
    /usr/bin/touch "${targetVol}/private/var/db/.AppleSetupDone"
    /usr/bin/touch "${targetVol}/Library/Receipts/.SetupRegComplete"
    fi
    # retry the hdiutil detach until we either time out or it succeeds
    retry_hdiutil_detach()
    local mount_point="${1}"
    local tries=0
    local forceAt=0
    local limit=24
    local opt=""
    forceAt=$(($limit - 1))
    while [ $tries -lt $limit ]; do
    tries=$(( tries + 1 ))
    /bin/sleep 5
    echo "Attempting to detach the disk image again..."
    /usr/bin/hdiutil detach "${mount_point}" $opt
    if [ $? -ne 0 ]; then
    # Dump a list of any still open files on the mountPoint
    if [ "${scriptsDebugKey}" == "DEBUG" ]; then
    /usr/sbin/lsof +fg "${mount_point}"
    fi
    if [ $tries -eq $forceAt ]; then
    echo "Failed to detach disk image at '${mount_point}' normally, adding -force."
    opt="-force"
    fi
    if [ $tries -eq $limit ]; then
    echo "Failed to detach disk image at '${mount_point}'."
    exit 1
    fi
    else
    tries=$limit
    fi
    done
    # Create the dyld shared cache files
    DetachAndRemoveMount()
    local theMount="${1}"
    local mountLoc=`mount | grep "${theMount}"`
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Detaching disk image"
    # Dump a list of any still open files on the mountPoint
    if [ "${scriptsDebugKey}" == "DEBUG" ]; then
    /usr/sbin/lsof +fg "${theMount}"
    fi
    fi
    # Finally detach the mount (if it's actually mounted) and dispose the mountPoint directory
    if [ "${mountLoc}" != "" ]; then
    /usr/bin/hdiutil detach "${theMount}" || retry_hdiutil_detach "${theMount}" || return 1
    fi
    /bin/rmdir "${theMount}" || return 1
    return 0
    # Turn off the Apple ID request that happens on first boot after installing the OS
    DisableAppleIDRequestForUser()
    local targetUserLib="${1}/Users/${2}/Library"
    # Only do this if the file doesn't exist
    if [ ! -e "${targetUserLib}/Preferences/com.apple.SetupAssistant.plist" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Disabling Apple ID request for user '${2}'"
    fi
    /usr/libexec/PlistBuddy -c "Add :DidSeeCloudSetup bool 1" "${targetUserLib}/Preferences/com.apple.SetupAssistant.plist" > /dev/null 2>&1
    /usr/libexec/PlistBuddy -c "Add :LastSeenCloudProductVersion string 10.8" "${targetUserLib}/Preferences/com.apple.SetupAssistant.plist" > /dev/null 2>&1
    fi
    return 0
    # If the pieces exist, enable remote access for the shell image
    EnableRemoteAccess()
    local srcVol="${1}"
    local opt=""
    if [ -e "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Enabling shell image remote access support"
    opt="-v"
    fi
    # install some things (again which aren't part of BaseSystem) needed for remote ASR installs
    /usr/bin/ditto $opt "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" "${mountPoint}/usr/lib/pam/pam_serialnumber.so.2" || return 1
    if [ -e "${srcVol}/usr/sbin/installer" ]; then
    /usr/bin/ditto $opt "${srcVol}/usr/sbin/installer" "${mountPoint}/usr/sbin/installer" || return 1
    fi
    # copy the sshd config and add our keys to the end of it
    if [ -e "${srcVol}/etc/sshd_config" ]; then
    /bin/cat "${srcVol}/etc/sshd_config" - > "${mountPoint}/etc/sshd_config" << END
    HostKey /private/var/tmp/ssh_host_key
    HostKey /private/var/tmp/ssh_host_rsa_key
    HostKey /private/var/tmp/ssh_host_dsa_key
    END
    fi
    fi
    return 0
    # If it exists, install the sharing names and/or directory binding support to the install image
    HandleNetBootClientHelper()
    local tempDir="${1}"
    local targetVol="${2}"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    if [ -e  "${tempDir}/bindingNames.plist" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Directory Service binding information"
    fi
    /usr/bin/ditto $opt "${tempDir}/bindingNames.plist" "${targetVol}/etc/bindingNames.plist" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/etc/bindingNames.plist"
    /bin/chmod 644 "${targetVol}/etc/bindingNames.plist"
    fi
    if [ -e  "${tempDir}/sharingNames.plist" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Sharing Names support"
    fi
    /usr/bin/ditto $opt "${tempDir}/sharingNames.plist" "${targetVol}/etc/sharingNames.plist" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/etc/sharingNames.plist"
    /bin/chmod 644 "${targetVol}/etc/sharingNames.plist"
    fi
    if [ -e  "${tempDir}/NetBootClientHelper" ]; then
    /usr/bin/ditto $opt "${tempDir}/NetBootClientHelper" "${targetVol}/usr/sbin/NetBootClientHelper" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/usr/sbin/NetBootClientHelper"
    /bin/chmod 555 "${targetVol}/usr/sbin/NetBootClientHelper"
    /usr/bin/ditto $opt "${tempDir}/com.apple.NetBootClientHelper.plist" "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist" || return 1
    /usr/sbin/chown root:wheel "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
    /bin/chmod 644 "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
    # finally, make sure it isn't disabled...
    /usr/libexec/PlistBuddy -c "Delete :com.apple.NetBootClientHelper" "${targetVol}/var/db/launchd.db/com.apple.launchd/overrides.plist" > /dev/null 2>&1
    fi
    return 0
    # If any exist, install configuration profiles to the install image
    InstallConfigurationProfiles()
    local tempDir="${1}"
    local targetVol="${2}"
    local profilesDir="${targetVol}/var/db/ConfigurationProfiles"
    if [ -e  "${tempDir}/configProfiles.txt" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing Configuration Profiles"
    fi
    /bin/mkdir -p "${profilesDir}/Setup" || return 1
    # Make sure the perms are correct
    /usr/sbin/chown root:wheel "${profilesDir}"
    /bin/chmod 755 "${profilesDir}"
    /usr/sbin/chown root:wheel "${profilesDir}/Setup"
    /bin/chmod 755 "${profilesDir}/Setup"
    /usr/bin/touch "${profilesDir}/.profilesAreInstalled"
    CopyEntriesFromFileToPath "${tempDir}/configProfiles.txt" "${profilesDir}/Setup" || return 1
    # Enable MCX debugging
    if [ 1 == 1 ]; then
    if [ -e  "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" ]; then
    /usr/libexec/PlistBuddy -c "Delete :debugOutput" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
    /usr/libexec/PlistBuddy -c "Delete :collateLogs" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
    fi
    /usr/libexec/PlistBuddy -c "Add :debugOutput string -2" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
    /usr/libexec/PlistBuddy -c "Add :collateLogs string 1" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
    fi
    fi
    # Converts a list of scripts (full paths contained in the file at $1) into packages in $3
    InstallScriptsFromFile()
    local tempDir="${1}"
    local theFile="${2}"
    local targetDir="${3}"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Converting scripts into install packages"
    opt="-v"
    fi
    while read FILE
    do
    if [ -e "${FILE}" ]; then
    # make an installer package out of the script
    CreateInstallPackageForScript "$tempDir" "${FILE}" || return 1
    # copy the resulting package to the Packages directory
    local leafName=`basename "${FILE}"`
    /usr/bin/ditto $opt "${tempDir}/${leafName}.pkg" "${targetDir}/${leafName}.pkg" || return 1
    # clean up
    /bin/rm -r "${tempDir}/${leafName}.pkg"
    fi
    done < "${theFile}"
    return 0
    # Prepare the source by deleting stuff we don't want to copy if sourcing a volume
    PostFlightDestination()
    local tempDir="${1}"
    local destDir="${2}"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Performing post install cleanup"
    opt="-v"
    fi
    # delete the DS indices to force reindexing...
    if [ -e "${mountPoint}/var/db/dslocal/indices/Default/index" ]; then
    /bin/rm $opt "${mountPoint}/var/db/dslocal/indices/Default/index"
    fi
    # detach the disk and remove the mount folder
    DetachAndRemoveMount "${mountPoint}"
    if [ $? != 0 ]; then
    echo "Failed to detach and clean up the mount at '${mountPoint}'."
    return 1
    fi
    echo "Correcting permissions. ${ownershipInfoKey} $destDir"
    /usr/sbin/chown -R "${ownershipInfoKey}" "$destDir"
    # Prepare the source by deleting stuff we don't want to copy if sourcing a volume
    PreCleanSource()
    local srcVol="$1"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    opt="-v"
    fi
    if [ -e "$srcVol/private/var/vm/swapfile*" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Removing swapfiles on $1"
    fi
    /bin/rm $opt "$srcVol/private/var/vm/swapfile*"
    fi
    if [ -e "$srcVol/private/var/vm/sleepimage" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Removing sleepimage on $1"
    fi
    /bin/rm $opt "$srcVol/private/var/vm/sleepimage"
    fi
    if [ -d "$srcVol/private/tmp" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Cleaning out /private/tmp on $1"
    fi
    /bin/rm -r $opt "$srcVol/private/tmp/*" > /dev/null 2>&1
    fi
    if [ -d "$srcVol/private/var/tmp" ]; then
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Cleaning out /private/var/tmp on $1"
    fi
    /bin/rm -r $opt "$srcVol/private/var/tmp/*" > /dev/null 2>&1
    fi
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Cleaning out devices and volumes on $1"
    fi
    if [ -d "$srcVol/Volumes" ]; then
    /bin/rm -r $opt "$srcVol/Volumes/*" > /dev/null 2>&1
    fi
    if [ -d "$srcVol/dev" ]; then
    /bin/rm $opt "$srcVol/dev/*" > /dev/null 2>&1
    fi
    if [ -d "$srcVol/private/var/run" ]; then
    /bin/rm -r $opt "$srcVol/private/var/run/*" > /dev/null 2>&1
    fi
    # Copy kernel and build the kext cache on the boot image
    PrepareKernelAndKextCache()
    local srcDir="$1"
    local destDir="$2"
    local opt=""
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Preparing the kernel and kext cache for the boot image"
    opt="-v"
    fi
    # Insure the kext cache on our source volume (the boot shell) is up to date
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Updating kext cache on source volume"
    fi
    /usr/sbin/kextcache -update-volume "${srcDir}" || return 1
    # Copy the i386 and, if it exists, the x86_64 architecture
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
    echo "Installing the kext cache to the boot image"
    fi
    # make sure this doesn't exist
    if [ -e "${destDir}/i386" ]; then
    /bin/rm -rf "${destDir}/i386"
    fi
    # Install kextcaches to the nbi folder

    After running your command, and using the mounted image as my source for creating the NetRestore image, SIU was able to complete the first two steps, but failed on the rest.  It was able to complete "Creating Image From Source", and "Preparing Image For Restore", but it fails on "Creating Bootable System".
    I've copied and pasted the end of the error log.  Any idea what caused the Bootable System from successfully being created?
    PERCENT:-1.000000
    Finalizing disk image.
    created: /Users/morgan/Desktop/30sept.nbi/System.dmg
    # Set aside the needed BaseSystem.dmg
    retrieveBaseSystemDMG "${1}" || mnrfiErrExit
    + retrieveBaseSystemDMG /tmp/niutemp.3PZq4yzF
    + local tempDir=/tmp/niutemp.3PZq4yzF
    + local opt=
    + '[' disk2s3 '!=' '' ']'
    + '[' DEBUG == VERBOSE -o DEBUG == DEBUG ']'
    + opt=-v
    + echo 'Retrieving BaseSystem bits from Recovery HD'
    Retrieving BaseSystem bits from Recovery HD
    mktemp -d "/tmp/mnt_rp.XXXXXXXX"
    ++ mktemp -d /tmp/mnt_rp.XXXXXXXX
    + recoveryMount=/tmp/mnt_rp.75pVTRHs
    + /usr/sbin/diskutil mount readOnly -mountPoint /tmp/mnt_rp.75pVTRHs disk2s3
    Volume Recovery HD on disk2s3 mounted
    + '[' -e /tmp/mnt_rp.75pVTRHs/com.apple.recovery.boot/BaseSystem.dmg ']'
    + /usr/sbin/diskutil unmount disk2s3
    Volume Recovery HD on disk2s3 unmounted
    + /bin/rmdir /tmp/mnt_rp.75pVTRHs
    + return 0
    # update progress information
    echo "${progressPrefix}_preparingASR_"
    + echo _progress_preparingASR_
    # "Scan the image for restore"
    asr_opt=""
    + asr_opt=
    if [ "${skipReorderingKey}" == 1 ] ; then
    asr_opt="--nostream"
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
    echo "Preparing image for restore without multicast reordering"
    fi
    else
    if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
    echo "Preparing image for restore"
    fi
    fi
    + '[' 0 == 1 ']'
    + '[' DEBUG == VERBOSE -o DEBUG == DEBUG ']'
    + echo 'Preparing image for restore'
    Preparing image for restore
    /usr/sbin/asr imagescan --source "${destPath}/${dmgContainer}.dmg" $asr_opt || mnrfiErrExit
    + /usr/sbin/asr imagescan --source /Users/morgan/Desktop/30sept.nbi/System.dmg
    Checksumming partition of size 63 blocks...done
    Block checksum: ....10....20....30....40....50....60....70....80....90....100
    Reordering:     ....10....20....30....40....50....60....70....80....90....100asr: successfully scanned image "/Users/morgan/Desktop/30sept.nbi/System.dmg"
    # update progress information
    echo "${progressPrefix}_creatingInstallSystem_"
    + echo _progress_creatingInstallSystem_
    restoreSource="${sourceVol}"
    + restoreSource='/Volumes/Macintosh HD'
    # If this is a restore from install media, mount that as our source
    if [ "${restoreSource}" == "(installMedia)" ] ; then
    sourceMount=`mktemp -d "/tmp/mnt_src.XXXXXXXX"`
    /usr/bin/hdiutil attach "${destPath}/System.dmg" -noverify -owners on -nobrowse -noautoopen -mountpoint "${sourceMount}" -quiet || crfsErrExit
    restoreSource="${sourceMount}"
    fi
    + '[' '/Volumes/Macintosh HD' == '(installMedia)' ']'
    # If we don't have a BaseSystem.dmg available to us fail now.
    if [ ! -e "${1}/BaseSystem.dmg" ]; then
    echo "There is no BaseSystem.dmg (Recovery HD) associated with the source ${restoreSource}."
    crfsErrExit
    fi
    + '[' '!' -e /tmp/niutemp.3PZq4yzF/BaseSystem.dmg ']'
    + echo 'There is no BaseSystem.dmg (Recovery HD) associated with the source /Volumes/Macintosh HD.'
    There is no BaseSystem.dmg (Recovery HD) associated with the source /Volumes/Macintosh HD.
    + crfsErrExit
    basename "${0}"
    ++ basename '/System/Library/CoreServices/System Image Utility.app/Contents/Library/Automator/Create Image.action/Contents/Resources/createRestoreFromSources.sh'
    + echo 'Execution of '\''createRestoreFromSources.sh'\'' failed. Cleaning up.'
    Execution of 'createRestoreFromSources.sh' failed. Cleaning up.
    + DetachAndRemoveMount /tmp/mnt.nfN5nVgM
    + local theMount=/tmp/mnt.nfN5nVgM
    mount | grep "${theMount}"
    ++ mount
    ++ grep /tmp/mnt.nfN5nVgM
    + local mountLoc=
    + '[' DEBUG == VERBOSE -o DEBUG == DEBUG ']'
    + echo 'Detaching disk image'
    Detaching disk image
    + '[' DEBUG == DEBUG ']'
    + /usr/sbin/lsof +fg /tmp/mnt.nfN5nVgM
    + '[' '' '!=' '' ']'
    + /bin/rmdir /tmp/mnt.nfN5nVgM
    + return 0
    + '[' '' '!=' '' ']'
    + /bin/rm -r /Users/morgan/Desktop/30sept.nbi/i386
    + /bin/rm /Users/morgan/Desktop/30sept.nbi/NetInstall.dmg
    + /bin/rm /Users/morgan/Desktop/30sept.nbi/System.dmg
    + /bin/rmdir /Users/morgan/Desktop/30sept.nbi
    + exit 1
    Script is done.
    Bridge exited with status 256
    Failed to create image from restore source.
    An unknown error has occurred.
    An unknown error has occurred.
    Image creation process finished...
    Stopping image creation.
    Image creation failed.
    Thanks.

Maybe you are looking for