System Imode too large

Dear all,
I am a BW guy. i have written ABAP program.
I have delivered the Program to Production .This program runs fine in all development and QA systems .But the program is throwing dump in the Production ( with an error SYSTEM_IMODE_TOO_LARGE).I got input as this is a memory issue and can be rectified by fine tuning the program
Could anyone help on this.
Please find the program in below link
[Program|http://www.4shared.com/file/144544927/3a37f230/REPORT_YSBWVASVAP_no_standard_page_heading.html]
Regards
Bala

It is indeed a memory issue, but since I'm not able to look at your code right now I can only suggest you have a look at the memory your report is consuming. You can use the memory analyzer for that (there is a blog / article on SCN somewhere). In general I guess that some of your internal tables are 'too big' (too many entries), so initializing them could help (FREE). On the other hand, it is also possible to change the profile parameter abap/max_imode (basis administrator).

Similar Messages

Dump - system imode too large

I am getting a dump saying SYSTEM_IMODE_TOO_LARGE. Any document available for this other than note 548845.
It is a zprogram.
Thanks,
Shweta

hi
good
See OSS Note 548845.
thanks
mrutyun^

BW System QBW: Result too large

Hi Everyone,
when i am running webi report its giving error.
we are using BO : 4.0 with conncetion.
BW System QBW: Result too large (917 070 cells);
data collection is limited by configuration
(maximum - 500000 cells) (WIS 00000)
Pls give me any solution for this issue......
Regards,
G

Hi Bhargav G,
If you still facing this issue.
Check the below link
BO 4 webi reports on Bex Query (BI 7.3)
It might be help you.
Regards,
Anish

ALTER SYSTEM SET processes=1000 generates ORA-00064: object is too large to

Hi All
I'm using Oracle Release 10.2.0.1.0.
When performing:
=============
ALTER SYSTEM SET processes=10000 SCOPE=SPFILE;
We can't start the 10g DB: ORA-00064: object is too large to allocate on this O/S (1,5282400)
When reducing the size to 150 there is no problem starting the db. I can not start it. ORA-00064: object is too large to allocate on this O/S (1,5282400)
I refered to ORA-00064: object is too large to allocate on this O/S :::Plz Help Me
But I can not resolve this problem.
Please help me.
thiensu

Not sure, because i haven't got ORA-00064 yet.
ORA-00064: object is too large to allocate on this O/S num, num
Cause: The initialization parameter DB_BLOCK_SIZE is set to a value that calls for more contiguous space than can be allocated on the operating system being used.
Action: Reduce the value of DB_BLOCK_SIZE so that the requested contiguous space is within the capacity of the operating system.
http://www.pitt.edu/~hoffman/oradoc/server.804/a58312/newch2a1.htm
Regards
Girish Sharma

BW Web Report Issue - Result set too large

Hi,
When I execute a BEx Query on Web I am getting “Result set too large ; data retrieval restricted by configuration (maximum = 500000 cells)”.
Following to my search in SDN I understood we can remove this restriction either across the BW system globally or for a specific query at WAD template.
In my 7x Web template I am trying to increase default max no of rows parameters, As per the below inputs from SAP Note: 1127156.
But I can’t find parameter “Size Restriction for Result Sets” for any of the web items (Analysis/Web Template properties/Data Provider properties)….in the WAD Web template
Please advise where/how can I locate the properites
Instructions provided in SAP Note…
The following steps describe how to change the "safety belt" for Query Views:
1. Use the context menu Properties / Data Provider in a BEx Web Application to maintain the "safety belt" for a Query View.
2. Choose the register "Size Restriction for Result Sets".
3. Choose an entry from the dropdown box to specify the maximum number of cells for the result set.
The following values are available:
o Maximum Number
o Default Number
o Custom-Defined Number
Behind "Maximum Number" and "Default Number" you can find the current numbers defined in the customizing table RSADMIN (see below).
4. Save the Query View and use it in another Web Template.
Thanks in advance

Hi Yasemin,
Thanks for all help...i was off couple of days.
To activate it I can suggest to create a dummy template, add your query in it, add a menu bar component add an action to save the query view. Then you run the template and change the size restriction for result set then you can save it by the menu.
Can you please elaborate on the solution provided,I created dummy template with analysis and Menu bar item...i couldn't able to configure menu bar item...
Thanks in advance

Since upgrade to iOS 7 Email error on over 100KB emails "Cannot Send Mail The message was rejected by the server because it is too large." Connecting to Exchange via Activesync

Hi,
Following the upgrade to iOS 7.0.3 on all our iPhone and iPad devices, it has been identified that when sending emails around 100KB in size and over an error message appears on the device stating “Cannot Send Mail The message was rejected by the server because it is too large.” See error message below. The send/receive limit is over 10MB so this is not the issue.
We are in an Exchange Environment using Microsoft Activesync. This issue is not evident in iOS 6. This has been tested on an iPhone 3GS running version iOS 6.1.3. We have been unable to repeat the issues seen on iOS 7 on the older OS. It is not possible to roll back to the older operating system as Apple are no longer signing the software.
We use Microsoft Active Sync to connect to our Exchange servers through a TMG. The issue is very inconsistent, some identical emails go through, some fail. This is not an issue with the send/receive limit as this is over 10MB. The error message when it fails on the TMG is Status: 413 Request Entity Too Large, which we believe is from IIS on the CAS server.
Does anyone have any suggest course of actions to take?
Many Thanks

This resolution have to attend at the server not with the ios device. My employer's mail administrator reject me to correct it from the server. As his concern is, if ither ios devices works why don't mine? So I am helpless than changing my iphone. It works fine for early versions of ios and with androids. And also one of my friends iphone4 with ios 7 (similar as mine) works too. So I guess it's something wrong with my iPhones settings. But basic question I cannot understand is it works in my phone before this ios7 upgrading. And currently working with my yahoo account too. Favourable reply expected.

ACROBAT XI Pro -EDIT TOOL SET - POP-UP WINDOW IS TOO LARGE

Good Day -
I've been experiencing very nagging problem since installing recent Acrobat Xi Pro uodate (on windows 7 system):
Specifically - I cannot edit/change the TOOL SET to include needed TOOLS (i.e., that were all previously in my Tool set) as the EDIT TOOL SET WINDOW (i.e., pop-up
window) is TOO LARGE and does not allow scrolling/ or moving down to SAVE any tool sets and or tool set changes. Very frustrating as all attempts (and recommendations from reviews/support) for decreasing the size of EDIT TOOL SET WINDOW (popup) in order to save (i.e. include ANY) tools have been unsuccessful. So for past week I've been unable to include/use any TOOLS for working in (i.e., editing/commenting etc) pdf's. Has anyone else experienced this problem? Would greatly appreciate any / all steps & recommendations for fixing.
Thank-you!

First, make sure you are on the latest update 11.0.09. Help->check for updates should get you there.
If check for updates says that you have the latest, see if the setting: Edit->Settings->General->Basic Tools->Scale for screen resolution and try various options (you'll have to restart Acrobat with each selection)

TIme Machine backup grows too large during backup process

I have been using Time Machine without a problem for several months, backing up my imac - 500GB drive with 350g used. Recently TM failed because the backups had finally filled the external drive - 500GB USB. Since I did not need the older backups, I reformatted the external drive to start from scratch. Now TM tries to do an initial full backup but the size keeps growing as it is backing up, eventually becoming too large for the external drive and TM fails. It will report, say, 200G to back up, then it reaches that point and the "Backing up XXXGB of XXXGB" just keeps getting larger. I have tried excluding more than 100GB of files to get the backup set very small, but it still grows during the backup process. I have deleted plist and cache files as some discussions have suggested, but the same issue occurs each time. What is going on???

Michael Birtel wrote:
Here is the log for the last failure. As you see it indicates there is enough room 345g needed, 464G available, but then it fails. I can watch the backup progress, it reaches 345G and then keeps growing till it give out of disk space error. I don't know what "Event store UUIDs don't match for volume: Macintosh HD" implies, maybe this is a clue?
No. It's sort of a warning, indicating that TM isn't sure what's changed on your internal HD since the previous backup, usually as a result of an abnormal shutdown. But since you just erased your TM disk, it's perfectly normal.
Starting standard backup
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Ownership is disabled on the backup destination volume. Enabling.
2009-07-08 19:37:53.659 FindSystemFiles[254:713] Querying receipt database for system packages
2009-07-08 19:37:55.582 FindSystemFiles[254:713] Using system path cache.
Event store UUIDs don't match for volume: Macintosh HD
Backup content size: 309.5 GB excluded items size: 22.3 GB for volume Macintosh HD
No pre-backup thinning needed: 345.01 GB requested (including padding), 464.53 GB available
This is a completely normal start to a backup. Just after that last message is when the actual copying begins. Apparently whatever's happening, no messages are being sent to the log, so this may not be an easy one to figure out.
First, let's use Disk Utility to confirm that the disk really is set up properly.
First, select the second line for your internal HD (usually named "Macintosh HD"). Towards the bottom, the Format should be +Mac OS Extended (Journaled),+ although it might be +Mac OS Extended (Case-sensitive, Journaled).+
Next, select the line for your TM partition (indented, with the name). Towards the bottom, the Format must be the same as your internal HD (above). If it isn't, you must erase the partition (not necessarily the whole drive) and reformat it with Disk Utility.
Sometimes when TM formats a drive for you automatically, it sets it to +Mac OS Extended (Case-sensitive, Journaled).+ Do not use this unless your internal HD is also case-sensitive. All drives being backed-up, and your TM volume, should be the same. TM may do backups this way, but you could be in for major problems trying to restore to a mis-matched drive.
Last, select the top line of the TM drive (with the make and size). Towards the bottom, the *Partition Map Scheme* should be GUID (preferred) or +Apple Partition Map+ for an Intel Mac. It must be +Apple Partition Map+ for a PPC Mac.
If any of this is incorrect, that's likely the source of the problem. See item #5 of the Frequently Asked Questions post at the top of this forum for instructions, then try again.
If it's all correct, perhaps there's something else in your logs.
Use the Console app (in your Applications/Utilities folder).
When it starts, click +Show Log List+ in the toolbar, then navigate in the sidebar that opens up to your system.log and select it. Navigate to the +Starting standard backup+ message that you noted above, then see what follows that might indicate some sort of error, failure, termination, exit, etc. (many of the messages there are info for developers, etc.). If in doubt post (a reasonable amount of) the log here.

(413) Request Entity too large intermittent error

I have page in a SharePoint 2013 website which is viewed over https. The page has several input fields including two file upload controls. I am trying to upload a sample picture less than 1MB for each of the controls.
I am calling a BizTalk WCF service on Submit. Sometimes, when I try to submit I get ‘413 Request Entity Too Large'. This error happens intermittently though because if I try submitting the same data a number of times, it fails sometimes and works other times.
The binding settings for the service are set in code (not in Web.Config) as shown below ...
var binding = RetrieveBindingSetting();
var endpoint = RetrieveEndPointAddress(“enpointAddress”);
var proxy = new (binding, endpoint);
proxy.Create(request);
public BasicHttpBinding RetrieveBindingSetting()
var binding = new BasicHttpBinding
MaxBufferPoolSize = 2147483647,
MaxBufferSize = 2147483647,
MaxReceivedMessageSize = 2147483647,
MessageEncoding = WSMessageEncoding.Text,
ReaderQuotas = new System.Xml.XmlDictionaryReaderQuotas
MaxDepth = 2000000,
MaxStringContentLength = 2147483647,
MaxArrayLength = 2147483647,
MaxBytesPerRead = 2147483647,
MaxNameTableCharCount = 2147483647
Security =
Mode = BasicHttpSecurityMode.Transport,
Transport = { ClientCredentialType = HttpClientCredentialType.Certificate }
return binding;
I have also set the uploadReadAheadSize in applicationHost.config file on IIS as by running the command below, as suggested here ...
appcmd.exe set config "sharepoint" -section:system.webserver/serverruntime /uploadreadaheadsize:204800 /commit:apphost
Nothing I do seems to fix this issue so I was wondering if anyone had any ideas?
Thanks

Sounds like it's not a SharePoint problem, does the page work correctly if you don't call the BizTalk WCF service? And what happens if a console app is calling the WCF service independently of SharePoint, does it fail then as well? In both cases, it would
limit the troubleshooting scope to the WCF service, which gets you a step further.
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

Sandbox WebPart Postback too Large?

Hi guys, I've done some research and it looks like the error I'm running into (when saving the web part properties) is that my post back is too large.
This is a simple sandbox web part I'm building, which works great until I added the last configuration option which put me over the limit.
Web Part Code (.cs)
using System;
using System.ComponentModel;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using Microsoft.SharePoint;
using Microsoft.SharePoint.WebControls;
namespace P.SPS.UI.Web_Parts.jQuery_UI_Accordion_Zone
[ToolboxItemAttribute(false)]
public class jQuery_UI_Accordion_Zone : WebPart
#region custom web part properties
[WebBrowsable(true),
Category("JQuery Options"),
Personalizable(PersonalizationScope.Shared),
WebDisplayName("Include jQuery"),
WebDescription("Check to include reference to jQuery. * Google CDN")]
public bool includejQuery { get; set; }
[WebBrowsable(true),
Category("JQuery Options"),
Personalizable(PersonalizationScope.Shared),
WebDisplayName("Include jQuery UI"),
WebDescription("Check to include reference to jQuery UI. * Google CDN")]
public bool includejQueryUI { get; set; }
[WebBrowsable(true),
Category("JQuery Options"),
Personalizable(PersonalizationScope.Shared),
WebDisplayName("Include jQuery UI CSS"),
WebDescription("Check to include reference to jQuery UI CSS. * Google CDN")]
public bool includejQueryUICSS { get; set; }
[WebBrowsable(true),
Category("JQuery Options"),
Personalizable(PersonalizationScope.Shared),
WebDisplayName("Include SPAccordions Script"),
WebDescription("Check to include the custom spaccordions() jQuery function.")]
public bool includeSPAccordionsScript { get; set; }
[WebBrowsable(true),
Category("JQuery Accordion() Properties"),
Personalizable(PersonalizationScope.Shared),
WebDisplayName("Width (px)"),
WebDescription("If set a min and max width will be applied to the tab container. (integer)"),
DefaultValue(0)]
public int dataWidth { get; set; }
[WebBrowsable(true),
Category("JQuery Accordion() Properties"),
Personalizable(PersonalizationScope.Shared),
WebDisplayName("Active"),
WebDescription("Which panel should be open? (integer)"),
DefaultValue(0)]
public int dataActive { get; set; }
[WebBrowsable(true),
Category("JQuery Accordion() Properties"),
Personalizable(PersonalizationScope.Shared),
WebDisplayName("Scroll to Top on Activate"),
WebDescription("When set to true, the accordion will stay in view while switching headers.")]
public bool dataScrollToTop { get; set; }
[WebBrowsable(true),
Category("JQuery Accordion() Properties"),
Personalizable(PersonalizationScope.Shared),
WebDisplayName("Collapsible"),
WebDescription("When set to true, the active panel can be closed.")]
public bool dataCollapsible { get; set; }
[WebBrowsable(true),
Category("JQuery Accordion() Properties"),
Personalizable(PersonalizationScope.Shared),
WebDisplayName("Disabled"),
WebDescription("If set the accordion will be disabled.")]
public bool dataDisabled { get; set; }
[WebBrowsable(true),
Category("JQuery Accordion() Properties"),
Personalizable(PersonalizationScope.Shared),
WebDisplayName("Event"),
WebDescription("The type of event that the headers should react to activate the panel. (event in quotations and comma seperated)")]
public string dataEvent { get; set; }
public enum dataHeightStyleOptions { auto, fill, content }
[WebBrowsable(true),
Category("JQuery Accordion() Properties"),
Personalizable(PersonalizationScope.Shared),
WebDisplayName("Height Style"),
WebDescription("Controls the heigh of the accordion widget and each panel.")]
public dataHeightStyleOptions dataHeightStyle { get; set; }
#endregion
protected override void Render(HtmlTextWriter writer)
if (includejQuery)
writer.WriteLine("<script src=\"//ajax.googleapis.com/ajax/libs/jquery/1.11.0/jquery.min.js\"></script>");
if (includejQueryUI)
writer.WriteLine("<script src=\"//ajax.googleapis.com/ajax/libs/jqueryui/1.10.4/jquery-ui.min.js\"></script>");
if (includejQueryUICSS)
writer.WriteLine("<script language=\"javascript\">$('head').append('<link rel=\"stylesheet\" href=\"//ajax.googleapis.com/ajax/libs/jqueryui/1.10.4/themes/smoothness/jquery-ui.css\" />');</script>");
if (includeSPAccordionsScript)
writer.WriteLine("<script language=\"javascript\">$(document).ready(function(){if((document.getElementById(\"MSOLayout_InDesignMode\").value==1)?false:true){$(\".spaccordions\").spaccordions()}});(function(a){a.fn.spaccordions=function(){var e=a(this).data(),b={active:(e.active)?e.active:0,collapsible:(e.collapsible==1)?true:false,disabled:(e.disabled)?e.disabled:false,heightStyle:(e.heightstyle)?e.heightstyle:\"auto\",event:(e.event)?e.event:\"click\"};if(e.scrolltotop){b.activate=function(g,l){var k;if(l.newHeader.length==1){k=a(l.newHeader[0])}else{k=a(this).find(\".ui-accordion-header\").eq(0)}var i=a(window).height();var o=(a(window).scrollTop()==0)?a(\"#s4-workspace\").scrollTop():a(window).scrollTop();var h=k.height();var j=k.offset().top;var m=a(\"#s4-ribbonrow\").height();var n=j+o-m;console.log(\"elementScrollY \"+j);console.log(\"screenY \"+i);if(j>=m&&j<=i){}else{a(window).scrollTop(n);a(\"#s4-workspace\").scrollTop(n)}}}var f=a(this).parents(\"table\").eq(1);var d=a('<div class=\"accordion\">');if(e.width>0){d.width(e.width)}var c=a(\"\");a(this).parents(\"tr\").eq(1).remove();f.find(\".s4-wpTopTable\").each(function(h){var g=a(this).find(\" > tbody > tr > td\");c=c.add(\"<h3>\"+a(g[0]).find(\".ms-WPTitle\").text().trim()+\"</h3>\");c=c.add(\"<div>\"+a(g[1]).html()+\"</div>\")});d.append(c);f.before(d);f.hide();d.accordion(b);return this}})(jQuery);</script>");
writer.WriteBeginTag("div");
writer.WriteAttribute("class", "spaccordions");
// build custom jquery Accordion() options
if (!isEmptyorNull(Convert.ToString(dataWidth.ToString())))
writer.WriteAttribute("data-width", dataWidth.ToString());
if (!isEmptyorNull(Convert.ToString(dataActive)))
writer.WriteAttribute("data-active", dataActive.ToString());
if (!isEmptyorNull(Convert.ToString(dataCollapsible)))
writer.WriteAttribute("data-collapsible", Convert.ToString(dataCollapsible).ToLower());
if (!isEmptyorNull(dataDisabled.ToString()))
writer.WriteAttribute("data-disabled", dataDisabled.ToString());
if (!isEmptyorNull(dataEvent))
writer.WriteAttribute("data-event", dataEvent);
if (!isEmptyorNull(Convert.ToString(dataHeightStyle)))
writer.WriteAttribute("data-heightstyle", dataHeightStyle.ToString());
if (!isEmptyorNull(Convert.ToString(dataScrollToTop)))
writer.WriteAttribute("data-scrolltotop", Convert.ToString(dataScrollToTop).ToLower());
writer.Write(HtmlTextWriter.TagRightChar);
writer.WriteEndTag("div");
writer.WriteLine("<p>Use the web part properties menu to configure options for <a href=\"http://jqueryui.com/accordion/\" target=\"_blank\">jQuery UI Accordion</a>.</p>");
base.Render(writer);
protected void Page_Load(object sender, EventArgs e)
public bool isEmptyorNull(string value)
if (string.IsNullOrEmpty(value) || value == "0")
return true;
return false;
Now can anyone recommend how I could solve this issue? I'm not a back-end programmer :/.
Error after Post:
Web Part Error: Unhandled exception was thrown by the sandboxed code wrapper's Execute method in the partial trust app domain: An unexpected error has occurred.
Show Error Details
Debugger doesn't show anything so I know it wasn't reaching my code.

Hi,
What the last configuration option did you add?
Try to disable the ViewState of the .Net control in the web part.
Or
Add following into web.config(C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\ 14\UserCode) to avoid sandbox webpart error after post back.
<httpRuntime requestLengthDiskThreshold=”4096” /> (or set value as per your requirement)
Here is a blog for you to take a look at:
http://sohilmakwana.wordpress.com/2013/11/29/sandbox-error-unhandled-exception-was-thrown-by-the-sandboxed-code-wrappers-execute-method-in-the-partial-trust-app-domain/
If you want to achieve an Accordion web part, the following links for your reference:
http://altfo.wordpress.com/2013/06/18/jquery-accordion-based-announcement-web-part/
http://fitandfinish.ironworks.com/2010/02/how-to-create-an-accordion-web-part.html
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

Attachment too large !

Since I reinstalled OS ver 1.0.7.3312 on my Playbook, I an getting this message in all my mail attachments: " Attachment too large " making impossible to download them. When the help buttom next to this message is clicked you get this other message: " The attachment exceeds the download size set by your administrator "
The afore mentioned message appears too when I try to compose a new mail with attachments. This happens ALWAYS, no matter which email account I am using. Otherwise in my bridged BB Bold 9700, attachments are not an issue nor are they in the mail accounts when entered directly trough Playbook's web browser... seems the problem is in the bridged mail client on the Playbook.
Question: How can this fixed?... Already deleted bridge in both equipments and reinstalled it without any result, already did a complete as of factory system install...

I have the same probelm, having just purchased the PB. n my second call to BB, after waiting 20 minutes, I reported tpo them that my BES provider was on version 4.1.4. Response was they need to have 4.1.5 or go to 5.0.3 and i will solve the problem. You'd think they would have had testing this before re;leasing the PB upgrade which triggered the problem. I'm no techie, but after debating on PB and using BB's for many years, this is becomeing to much of a hassle!!
Great products that don't work when you buy it, are simply junk!

Query Error Information: Result set is too large; data retrieval ......

Hi Experts,
I got one problem with my query information. when Im executing my report and drill my info in my navigation panel, Instead of a table with values the message "Result set is too large; data retrieval restricted by configuration" appears. I already applied "Note 1127156 - Safety belt: Result set is too large". I imported Support Package 13 for SAP NetWeaver 7. 0 BI Java (BIIBC13_0.SCA / BIBASES13_0.SCA / BIWEBAPP13_0.SCA) and executed the program SAP_RSADMIN_MAINTAIN (in transaction SE38), with the object and the value like Note 1127156 says... but the problem still appears....
what Should I be missing ?????? How can I fix this issue ????
Thank you very much for helping me out..... (Any help would be rewarded)
David Corté

You may ask your basis guy to increase ESM buffer (rsdb/esm/buffersize_kb). Did you check the systems memory?
Did you try to check the error dump using ST22 - Runtime error analysis?
Edited by: ashok saha on Feb 27, 2008 10:27 PM

Result Set Too Large : Data Retrieval restricted by configuration

Hi Guys,
I get the above error when running a large dataset, with a hierarchy on - but when I run without a hierarchy I am able to show all data.
The Basis guys increased the ESM buffer (rsdb/esm/buffersize_kb) but it still causes an issue.
Anyone any ideas when it comes to reporting large volumes with a hierarchy?
Much appreciated,
Scott

Hi there
I logged a message on service marketplace andg got this reply from SAP:
' You might have to increase the value for parameters
BICS_DA_RESULT_SET_LIMIT_DEF and BICS_DA_RESULT_SET_LIMIT_MAX as it
seems that the result set is still too large. Please check your
parameters as to how many data cells you should expect and set the
parameter accordingly.
The cells are the number of data points that would be send from abap
to java. The zero suppression or parts of the result suppression are
done afterwards. As a consequence of this, the number of displayed
data cells might differ from the threshold that is effective.
Starting with SPS 14 you get the information how many data cells are
rejected. That gives you better ways to determine the right setting.
Currently you need to raise the number to e.g. 2.000.000 to get all
data.
If BICS_DA_RESULT_SET_LIMIT_MAX is set to a lower value than
BICS_DA_RESULT_SET_LIMIT_DEF, it would automatically cut the value of
BICS_DA_RESULT_SET_LIMIT_DEF down to its own..
Please note that altough this parameter can be increased via
configuration, you should do a proper system sizing according to note
927530 to ensure that the system can handle the number of users and
resultset sizes you are expecting."
Our basis team have subsequently apllied these changes, and I will be testing today.
Thx

Trx F-53, The difference is too large for clearing Message no. F5263

Hi,
I created a PO, then I posted the goods receipt, the invoice and I was trying to
post the payment by F-53 trx.
When I select an open item from the list and I try to simulate the posting by the menu (Document, simulate), system replies by:
"*The difference is too large for clearing
Message no. F5263*"
Cannot understand why it is not possible to post the outgoing payment
Regards

Dear Sappione,
did You check the tolerances?
Check in transaction OBY6 the indicator 'No forex rate diff. when
clearing in LC' is not set the amount is converted with the exchange
rate valid at clearing date, in case You're clearing in LC a foreign document.
When you post a clearing transaction with rounding
differences, those differences are posted to an additional line item
GL accounts. This account determination is customized as follows :
FBKP - Exchange rate differences -
Exchange rate difference in open items - KDF -a/c XXXXXXXXX
(Realized gain exchange rate difference)
The accounts used for rounding differences when clearing
are the realized gain/loss exchange rate accounts.
please check all the 3 suggestions.
Mauri

Query is too large

Hi,
Can any one give me the solution to develop this report.
I have 12 columns under each vertical.Like that i have 12 verticals for my Gross margin Report.
Then 12* 12=144 coloumns.total are 144.
But in Bi-Bex it will allow only limited columns. When i execute the report i'm getting the error that query is too large.Kow to overcome this.
Note Points :
Vertical1 : ITG
This Vertical consists of 20 Profit centers
Vertical2 : UTG
                This Vertical consists of 60 Profit centers
Vertical3 : SBI
                This Vertical consists of 50 Profit centers
Vertical4 : SERVICEDIVISIONS
                This Vertical consists of 10 Profit centers
Vertical5 : ENGG
                This Vertical consists of 50 Profit centers
Vertical6 : HITECH
                This Vertical consists of 10 Profit centers
u2022     Data Before Eliminations is Total of All the Verticals Data.
u2022     Eliminations Contains Values For Each Month for any of the above profit centers.
u2022     Data After Eliminations is Data Before Eliminations + Eliminations Data.
I searched in SDN but no luck..........
Thanks

hi sony,
one way to go about this is to increase the "Size Restriction for Result Sets". This is pretty tricky. I wouldn't really recommend this since this can have performance issues.
you can increase the size for result sets by running the abap report SAP_RSADMIN_MAINTAIN , Again be carefull when you are doing this.
Follow the below steps.
1)     Transaction Code SA38 or SE38
2)     In the program field, enter the report name SAP_RSADMIN_MAINTAIN and choose Execute.
3)     For OBJECT, enter one of the following parameters;
        BICS_DA_RESULT_SET_LIMIT_DEF
        BICS_DA_RESULT_SET_LIMIT_MAX
For VALUE, enter the value for the size of the result set, and then execute the program:
Also, for your information, the default setting for the result set of Web applications is 500,000 cells. If the result set exceeds the size specified using the report, a message is displayed to inform the user.
I would again ask you to be careful when you are modifying these values.
Best would be to make sure that you check the table RSADMIN, whether you have the above entries (BICS_*), if you don't u can update these entries in the system. via the above said abap report.
Hope this helps.
regards,
Sree.
Edited by: Sree Nair on Aug 18, 2009 1:14 PM
Edited by: Sree Nair on Aug 18, 2009 1:23 PM

System Imode too large

Similar Messages

Maybe you are looking for