System in English, except for log-in screen which is Spanish. How to fix?

Hello,
When in Barcelona recently my hard-drive pretty much and I had to get a new one installed. I've changed everything back to English, and it's as you were (minus the files i didn't manage to save, naturally)...
However the log in screen remain in Spanish, all 'usario', 'contraseña', etc. I understand Spanish extremely well, but I would like to revert this screen to English. Everything else, in every aspect, is English.
Any ideas guys?

Should have said above, *pretty much died

Similar Messages

Has anyone had there ipod touch repaired or serviced through apple for a broken screen (internal) if so how long did it take to get it sent back

has anyone had there ipod touch repaired or serviced through apple for a broken screen (internal) if so how long did it take to get it sent back

Not really. Is say "pending"
pend·ing
/ˈpendiNG/
Adjective
Awaiting decision or settlement.
Preposition
Until (something) happens or takes place: "they were released on bail pending an appeal".
Synonyms
adjective.
pendent - undecided - unsettled - outstanding - pendant
preposition.
during - until - till - to

Same here, Just upgraded to 6, and no WiFi, just goes to a Apple log-in screen, which it can't find. HELP

Same here, Just upgraded to 6, and no WiFi, just goes to a Apple log-in screen, which it can't find. HELP

Make sure your Apple TV is on the same network as your iPad. The SSID and password of router must be set in your Apple TV.
http://i1224.photobucket.com/albums/ee374/Diavonex/491f4b34c45018abef609c832b0f2 56a_zps0d1c18e7.jpg
Message was edited by: Diavonex

IPad turned into blue screen then shut down how to fix?

iPad turned into blue screen then shut down how to fix I cannot play games..

Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, restore your iPad using iTunes or iCloud > iOS: Back up and restore your iOS device with iCloud or iTunes

Aperture 3.1.2 When exporting files to Finder is creating a folder for each file, that means export 200 files is creating 200 folders for each files. Does anyone knows how to fix this. Thanks

Aperture 3.1.2 When exporting files to Finder is creating a folder for each file, that means export 200 files is creating 200 folders for each files. Does anyone knows how to fix this. Thanks

No. This is NOT true. I've been battling with this for a couple hours.
I choose Export>Versions
choose
Subfolder Format: Project Name
no custom subfolder
Name Format: Current Version Name.
Aperture creates project folders for each image and names them Projects1, Projects2, Projects3 etc.
To be sure, I have no project named Projects
x
This particular Aperture library has 16 projects. you can see in the screen grab it's created more than 30 folders
If I uncheck the Subfolder, that is say NONE, I just get images and images and images, not in their project folders (of course, because I've said NONE, so why would it put them in project folders?)
I just want to export the entire library and have the versions placed in folders named by the projects from which they came.... ez enough, no?

The wifi i have been using for months quit working yesterday. any ideas how to fix this?

the wifi i have been using for months quit working yesterday. any ideas how to fix this?
HELP!!!

Is your Wi-Fi visible?
iOS: Wi-Fi or Bluetooth settings grayed out or dim
iOS: Troubleshooting Wi-Fi networks and connections
Did you check your router?
iOS: Recommended settings for Wi-Fi routers and access points

Why all of a sudden am I having difficulty sending Gmail emails? I get a send error. When I run diagnostics there is a SMTP and IMAP account for Gmail and I am not sure how to fix this.

Why all of a sudden am I having difficulty sending Gmail emails? I get a send error. When I run diagnostics there is a SMTP and IMAP account for Gmail and I am not sure how to fix this.

Hi jodilynnf,
When using Connection Doctor to see what is could be causing the issue, look for the red dots to let you know what is wrong. Then all you have to do is correct that information. You can double click on the section that is giving you issue and it will take you there. Most issues could be just password being entered incorrectly. Take a look at the article below to walk you through troubleshooting issues with Mail.
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/en-us/TS3276
Take it easy,
-Norm G.

Start up Log In screen (box) shows "Other", how can I get rid of this user.

My Log In screen (start up box) shows my normal user names and something called "Unknown". How do I get rid of this Unknown name?
I tried deleting "Unknown" in the System > Accounts, but he is not there.
Cheers.
Message was edited by: ShakuZen

I followed your link supplied, #5 below is an issue, I have no "Edit..." button to click. There is a "Network Account Server: Join..." button.
How to disable the root user
Mac OS X v10.6 and later
1. From the Apple menu choose System Preferences....
2. From the View menu choose Accounts.
3. Click on the lock and authenticate with an administrator account.
4. Click Login Options....
5. Click the "Edit..." button at the bottom right
6. Click the "Open Directory Utility..." button.
7. Click the lock in the Directory Utility window.
8. Enter an administrator account name and password, then click OK.
9. Choose Disable Root User from the Edit menu.
Also, In the left area of this Accounts screen it reads:
My Account
Dick (Admin)
Other Accounts
Guest Account (Disabled)
Jane (Admin)

My ITunes works perfectly except for the ITunes Store which gives me the following message "I Tunes could not connect to the I Tunes Store. An unknown error ocurred (-3221)

Whenever I try to connect to the I Tunes Store, I get the following message " I Tunes could not connect to the I Tunes Store. An unknown error occcured (-3221).
Make sure your network connection is active and try again.
But my network connection is active.
Help!

Hi davwatto thanks for taking the time to reply.
ok, so tried to open my safari which was version 5.1.7 and i received the error message:
safari can't connect to the server
safari can't open the page http://www.apple.com/startpage/ because safari can't connect to the server www.apple.com
The same error occurred with whatever site I tried to access, so I uninstalled Safari, then reinstalled version 3.2.3 and this time I got the error message:
The same error message occurred with any website I tried to access. I am able to access all websites including banking etc on IE and firefox.
Safari can’t open the page.
Safari can’t open the page “http://www.apple.com/startpage/”. The error was: “unknown error” (kCFErrorDomainWinSock:10013) Please choose Report Bugs to Apple from the Help menu, note the error number, and describe what you did before you saw this message.
Not sure how to check the logs for itunes though
If you have any idea how to fix this issue that would be great as im at a total loss.
Thanks

Ipod shuffle 4th generation device not shown on itunes, not charging. Seeing red light when connecting to USB charger for a few seconds, then nothing. How to fix this?

My ipod shuffle 4th generation was working fine for a few months. My son then bit the USB charger. I bought a new USB charger, but the shuffle is not charging and not showing up under the devices in itunes. It also doesn't appear in my windows under my computer. Just to note. I also have a new ipod touch. I am able to charge that fine on the same computer using the USB charger. The device (Ipod touch) does show up in windows and in itunes. The shuffle doesn't show in either place.
I have tried to use the apple support page. I went through each step. I made all of my USB drives not shut down, I had my computer on all night to try and charge the shuffle. All I see is a red light that appears on the shuffle for a few seconds when I first connect the USB charger to the computer. Then, nothing. Since this was working a bit ago, I don't think that I have a defective shuffle. The USB charger is brand new, I just picked it up yesterday from the apple store. I have the short one, and the longer cable as well.
Any help that you might be able to give to me would be much appreciated. My daughter is missing listening to her music. Thanks!

Instead of "charger," you should call it the "USB cable" to avoid confusion. When started reading your post, I was thinking, how can your son break a USB power adapter (the "charger" that plugs into a wall socket) by biting it...
Since you got the product with the two USB cables at the Apple Store, you have the right replacement (some third-party replacements are for the 2nd gen shuffle and do not work with the 4th gen shuffle). Make sure you are completely inserting the plug into the headphones jack. The fit may be tighter than expected, since the connectors are new.
http://support.apple.com/kb/TS3572
If you tried both of those cables, it would be unlikely that you got two faulty cables in one package. If a new USB device has been added to the computer between the time it worked with the old cable and now, there could be a problem on the USB bus (such as not enough power or a device conflict).
As a test, you should shut down (power off) the computer and disconnect all USB devices (including any hub), except for standard keyboard and mouse (if used). Do this to reset the shuffle
http://support.apple.com/kb/ht1655
Start up computer, run iTunes, and connect the shuffle by itself to a direct USB port on the computer.

I downloaded a movie but when i try to play it, it just shows a black screen. Anyone know how to fix this?

I downloaded a movie but when i try to play it itjust shows a black screen and wont play. Anyone know how to fix this?

Are you getting an "iTunes has stopped working" message after the black, screen? Or is something a bit different going on?

When I am downloading a free application (foursquare) in the App Store, it came up with a message saying Verification Required which means I need to pay for it. Can anyone tell me how to fix this problem?

I am currently using iPhone 3GS and when I am going to download foursquare which is a FREE application in the App Store, it came up with a message saying Verification Required which means I need to pay for it. Can anyone tell me how to solve the problem? For further informations, I am currently using Windows running Vista. Special thanks to those who replied.

Your iTunes account sounds like it does not have a credit card or payment attached to it. Even free apps require that you have entered payment information even though you won't be charged for the app.

My wife and I have separate AppleID accounts and always have. For some reason after she bought the iPhone 5c, whenever she tries to update her apps, it comes up for my AppleID and asks for my password. Please help on how to fix this!

My wife and I have separate AppleID accounts. Ever since she updated to the iPhone 5c, for some reason when she tries to update her apps, it comes up with my AppleID and asks for my password. I cannot figure out why this happening and how to fix this. Please help!

I have had this issue lately.
I can only put it down to using the one computer to update all our IPads for me and my wife.
Some of our apps, although downloaded from both our seperate accounts on our IPads, are the same.
However after plugging her IPad into the computer when my AppleID is on ITunes, I think something strange has happened and when she then tries to update Apps on her IPad and I try on mine it now asks for the others Apple ID password.
The only way I have found to counteract this is to update an app one at a time, if that app asks for your wifes password then delete it and then reinstall it.
That has solved it for me.
Hope this helps

Twitchy green screen... How to fix it???

Hi, I've had my iPhone 4s for 7 months now. I haven't dropped it or anything but whenever I go in a video or photo, a weird green twitchy light appears on the dark places (black hair for example). Does anyone know how to fix it. It's been happening ever since I bought it.

Nowadays with all the chips/circuitry so embedded into single chip sets and boards a problem in one area will effect the unit as a whole and is unfixable other than to replace the whole board unfortunately but welcome to the disposable generation is one of the downsides of downsizing (pun intended) electrical equipment. you could try to find a repair centre to look at it but it sounds like you have multiple failures over multiple portions of the elec board and i would say by the time you had replaced all the damaged components the total cost with labour and all would be far and above the cost of a new phone sorry but i reckon unless you can live with the issues (which will probably get worse over time as more components are affected) i would suggest looking at buying a new one

Love the X2 except for 3 main issues which I need help or clarification with

Hi Everyone, I have pretty much copied and pasted my post from the Motorola forums (with a few minor edits) over here as I do need a little bit of help or insight on my issue.
I have scoured through the Droid X section trying to find solutions to my problems and I haven't been able to get a solid answer anywhere (here or on other Android/X2 forums).
I have an X2. I really like this phone. It is solid and has crystal clear sound quality. However, ever since I have had it I have seen intermittent issues pop up and I would like to get some feedback on them or get things put into perspective that it is a known glitch in the interface between the Android OS and the hardware. I bought the phone at Best Buy and every time I bring it in (either back to Best Buy or a Verizon store), as the issue is intermittent, they won't replace the phone. The people at Best Buy have told me to "do a battery pull every morning" which completely offends me as I never had to do anything so drastic with my original Droid until it finally decided to reboot on me every 2 hours (this is when I upgraded to the X2). I had to pick it up from Best Buy as I needed a functional phone immediately and no Verizon store in the area had the X2 in stock.
The first (and most important issue)... Every once in a while, even though I have full signal, when somebody calls me, my phone will not ring or vibrate. It will ring the full six times on their end but does not show up on my phone as ever receiving or missing the call. After the six rings on their end, it goes to voicemail and after they leave the message, only the voicemail indicator shows up. Over the past month this has happened multiple times (once or twice a week). Those who don't leave messages have had to hunt me down because they thought I had left my phone elsewhere as it never rang or notified me of an incoming call.
The next two issues are still important to me but they are more of an inconvenience than anything else.
Sometimes (yes, this is intermittent too but it happens daily), when I wake my phone from sleep, all of the antennas seem to be off and it takes a good second or two to show back up in the status bar (3G, Bluetooth, etc). My question is, have all of the non-CDMA antennas "gone to sleep"? The signal bar for the actual cell service are still there, just not the other services (3G/1X) or wireless settings (Bluetooth/WiFi) for a couple seconds.
Lastly (and this may be a direct link to the previous question), when I use the "Google Talk" application, the messages I send go through very quickly, but sometimes I do not get replies for a long time after they are sent (30 minutes to and hour later). If I wake the phone, sometimes a previously sent message will come through, and when I check the chat log in Gmail itself, the message was sent from quite a while back (15 minutes to an hour).
I know I am brand new to your community, and I am sorry to have to burden you all with a post like this as my initial post. However, I have always liked and used Motorola phones with Verizon/GTE (all the way back to the MicroTAC series of the early 90s) without issues or incidents for the most part. As my original Droid was starting to act up I decided to jump on the X2 as it was just released. I understood that it was not going to initially come with Gingerbread and I said I would be patient for the update to come and hopefully it would bring a new level to the phone itself as well as solve some (if not all) of the issues. However, now that it is past my return date, and there is no update as of yet, I do require assistance.
Thanks in advance for any assistance or insight,
Tuan

Thanks for the replies everyone.
The responses I received over at the Moto forums said the same thing about the battery saver mode. However, I have had the same issue with the radios shutting off during the day while it is in "Nighttime savings mode" so I'm just thinking it's an oddball glitch with the phone's power management settings and clock. I have recently changed the battery mode to "Performance Mode" from Nighttime Savings" as I have the phone plugged into the charger at night anyways. I'm hoping that will take care of both my radio and gtalk issues.
@Wildman: I have heard the same thing about the GB update from a Verizon rep very recently myself. I am still going to hope for an update sometime in the near future, but I do recall the first update for my Original Droid was months down the line from the release day.
@Droiddude: Are you just cycling the power? Or are you actually doing physical battery pulls? If cycling the power works for you it would lessen the burden of pulling that Incipio case (Verizon Double Cover) off my phone every time to do battery pulls. It's a great case but wow it's a tight/snug fit.
@vereyezuhn: I understand that there are possible dead areas in which my main issue may occur. I even have a prepaid phone for the times I am in a Verizon dead zone. However, when my issue occurs, I will be in the same spot for a while. I will receive all my calls, miss one in the manner I have spoken, then receive the following calls normally (SMS/MMS does not seem to be affected either as I seem to receive all of those). This is why I have this specific issue. I have recently cleared the phone's cache partition as well as update the PRL using *228 option 2. We will see over time if this eliminates the issue or at least makes it much more rare.

System in English, except for log-in screen which is Spanish. How to fix?

Similar Messages

Maybe you are looking for