System info and my RD480 NEO2 FI

could someone else that has this motherboard look and see if the amount of memory is correct in the windows system information. i have 1 gig of memory but it only shows 512. on the other hand if i go into the control panel and look in system/general it shows the correct amount of memory.

all fixed

Similar Messages

Lion disables system info and software update in about this mac

hey guys I have problem with lion when I reboot lion,
it disables system info and software update in "about this mac"
actually it says "this button is disabled because there is no system profiler application" or "this button is disabled because there is no software update application"
and also everytime when I reboot my computer it always changes default applicatons. for example
it changes from VLC player to quicktime, from Archive utility to textEdit and so on.
each time i got to reinstall "Afloat application" if i want to use it.
for making them ok I just need to open software updater from system pref. and the button becomes visible again.
it is same with the system info. I gotto search system profiler via spotlight search and I run, button becomes visible again.
for the archieve utility i got to go to coreservices and open Archieve utility then automatically it becomes default app for .zip files again.
/___sbsstatic___/migration-images/170/17091900-1.png
http://imageshack.us/photo/my-images/689/screenshot20111225at659.png/

Did you just install Lion? If so, you might need to try to reinstall as something got messed up.
Alfoat uses SIMBL which will break at just about every update. The reason you may have to keep installing Afloat is because the Resume feature of Lion is not compatible with SIMBL. See here: http://roaringapps.com/app:383
SIMBL is a low-level system hack and may be causing your problems.

IPS Signature versions doesnt match from system info and dashboard

Hi, I have a customer who has a IPS runing version 6.2(1)e3. after the last auto update, the sig version from the asdm system info shows 377, however from the IDM health dashboard, the sig version shows 373, I am wondering if someone can provide some suggests what might cause the problem, thanks in advance

When this happened to me, I rebooted the sensor and fix it. If the IPS sensor is "inline", be sure you are in Auto bypass mode. Meaning - if the sensor fails, traffic is not halted.
Hope this helps.

This Forum does not report correct system info and thinks I am still using v3.6.x

Visiting the Forums the sidebar info is incorrect. For example I am advised:
System Details
Windows XP
Firefox 3.6.16
Wrong!!
I am using Vista and Firefox 4.0
On this page the info is correct.
These silly inconsistencies suggest that this version has been inadequately tested.
Upgraded and now bitterly regret it! This info is wrong; the Google search bar no longer works correctly - beginning to lose confidence in the browser!

When visiting forums the 'System details' are the details of the user that posted the question, not your system details. For example look at the System details on this page, it correctly identified you as Fx 4.0 on Vista.

I reformated my computer to sell and now I cannot figure out how to find the system info and specs of the computer

I had Apple wipe my computer clean and now it's at the "Welcome" page but I need to find out all the specs like RAM/Hardrive space how can I get that info without running the welcome intro?

if you know the year and CPU speed of this macbook - go to everymac.com and match your specs from the year it was released.
if you can see your serial number - go to the link below and enter the last 3 characters of your serial number and you'll get the specs.
http://www.everymac.com/ultimate-mac-lookup/

EyeTV hybrid not seen in system info and not recognised on usb

Hi
I have an Elgato hybrid usb tv reciever which is not being recognised on my 27" imac. I thought it was faulty but when plugged into my 21" imac it works. I reinstalled the software and it worked until it was rebooted at which point it dosn't work again. I performed a PRAM reset which seemed to work until a reboot. Now neither reinstalling the software or PRAM test get it to work and I'm thinking they didn't solve it before. I have removed all usb devices to try and get the elgato to work. Elgato support say it is a file permissions issue but since I only have one user configured and that is admin level, I don't believe that is the issue.
Other USB devices work in the USB port and the Elgato works on another machine.
Any ideas for me to check?
Thanks in advance

Hello,
To find out if it's system wide or user specific, try this...
Open System Preferences>Accounts, unlock the lock, click on the little plus icon, make a new admin account, log out & into the new account.
Does it work in the new account?

Mismatch in amount of free space, between UI and System Info.

I'm running a 2011 15" MBP, with a 2 TB drive in it, and the UI is indicating that I have about 520 some odd GB left. System Info and Drive Genius indicate about 490 some odd.
I don't foresee this being a huge problem any time soon, but it's bugging me.

Click here and see the note at the bottom of the page.
(120521)

New Radeon 5770 1GB and old MSI RD480 Neo2 motherboard incompatible?

Hi,
Am having problems getting my machine to post after inserting a new graphics card: Sapphire Radeon 5770 1Gb. Have no problems with my old card in the PCI-E slot (X800GTO) - it works fine. But when I insert the 5770, the machine won't even post.
The core of my machine is ~4 years old, with a MSI MS-7194 RD480 Neo2 motherboard. I've updated the PSU to a Corsair 650W and as the light on the graphics card is on and ATI recommend a 450W PSU I doubt it's a power issue (and yes, I have attached a PCI-E power lead to the 5770)...
Is the issue that my motherboard is too old? Or is there a newer BIOS for it? I tried the MSI LiveUpdate tool which said there wasn't.
So I'm a bit stumped! Am in the process of putting a new machine together, but can only buy 1 or 2 parts each month - I was hoping to make the most of the graphics card before I had to cough up for a new CPU/Mobo!
All help gratefully received - thanks!
PS
Here are my system details:
Mobo: MSI MS-7194 1A RD480 Neo2
Bios: 26/2/2006 version (from msinfo32)
CPU: Athlon 64 X2 3800+
RAM: Crucial, 4x512Mb
GPU: Sapphire Radeon HD 5770 1Gb VaporX (no drivers installed as machine won't even post!)
PSU: Corsair TX650W +3.3V: 24A, +5V: 30A, +12V: 50A. Max combined +3.3/+5: 170W.
HD: SATA1: WesternDigital 200GB, SATA2: Samsung Spinpoint F3 1TB.
DVD-RW Sony IDE0, DVD-ROM Sony IDE1
OS: Windows XP SP2

There has been an on going problem with that model # in general and that brand & model in particular not working on a wide variety of MB's. On some MB's that have 2 16x slots it will not work in slot 1 but will in slot 2.

I have an external hard drive from my time capsule that stopped working on me. I am attempting to access the data with a hard drive reader on my MAC. I am able to see the drive in disk utility and under system info USB. But I am unable to access the data.

I have an external hard drive from my time capsule that stopped working on me. I am attempting to access the data with a hard drive reader on my MAC. I am able to see the drive in disk utility and under system info USB. But I am unable to access the data and it does not show on the desktop when connected.

Ok if disk utility was able to verify the drive I doubt there is any problem.. are you trying to open a TM backup??
You need to mount the sparsebundle then check the actual info inside the bundle.
Don't use disk warrior.. if the disk has verified then unless you deliberately deleted files there is nothing that is going to do.
Pondini has a lot of stuff about getting access to the sparsebundle.
http://pondini.org/TM/17.html
But if you have copied info to the TC that is now gone.. and the disk is ok.. I am not sure.. the TC will not have deleted the files itself.

Time machine only copies User Info and Users (Applications, Library, and System are missing) from my quad core Mac Pro. 45 Gb of 162 Gb are missing. Any one having success with time machine copying all folders using Mavericks? What do I need to do dif

Time machine only copies User Info and Users (Applications, Library, and System are missing) from my quad core Mac Pro. 45 Gb of 162 Gb are missing. Any one having success with time machine copying all folders using Mavericks?
What do I need to do differently?

The late, great Pondini was investigating that issue before he passed away.
See here: https://discussions.apple.com/thread/5125969
I think there might be information there on how to reset Time Machine to do a full backup. I think you basically have to reset it and start over.

MSI RD480 Neo2 : HT Link Speed

I've just discovered the HT Link Speed limitation in the current 3.2 bios for the MSI RD480 Neo2 and was wondering if MSI is able/going to fix this issue? and add if possible the 2x,3x,4x,etc HTT links??
Previously this was not an issue since i had an AMD Athlon 3400 (with an AMD set 4x HTT multiplier), this created a HT link of 1,000Mhz when running my cpu/memory to 250 mhz. However with my newer X2 4200 which is factory set at 5x, I'm hitting the HT max mhz limit pretty quick..
For the moment i can set the HT Link from Auto to 200, however the limited bandwidth is really chocking the system.
Regards,

Thanks for the reply Bosskiller.
In the RD480 3.2 bios there are only two options for HT Links. Auto and 200... (it's interesting, the popup menu gives the feel that there was plans for more options.)
From my testing, "auto" seems to take the HT speed burned in by AMD. (800 HT (4x) or 1000 HT (5x))
I've dropped the cpu divider down to x8 on the x2 4200 (11x factory) and the memory divider to 166 speed (i've ran this pc4000 at 250mhz ddr with this exact mb, just with the single core 3400 (800 HT 4x) cpu. But just to take them out of this issue.
(auto)
215 = 1079.4
220 = 1104
225 = 1129
230 = 1153.8
235 = bios hard lock... (cmos reset)
(200)
235 = 235 (boots just fine, currently running prime on the cpu's.)
Regards,

MSI RD480 Neo2-FI

Hi, I have a MSI RD480 Neo2-FI, that presents/displays the following problem, when I connect a sata hard disk mother board does not recognize it because it does not appear in the sata list of devices, when I am going to install winxp I install driver that it brings in disket but when beginning the installation says that there is no device where to install win and it leaves to me the installation, if somebody can help me would thank for it , my english is not perfect, sorry...but they answer to me better in Spanish , thanks...

Likely that one of four things is wrong.
PSU does not have enough 12v amps... Should be 24 or more amps on the 12v rail for even a small A64 system.
Bad process to setup the drive or a bad driver.
Bad Drive
Bad MB
Those are pretty much in order of how they would be checked by a tech as well.
If you have a freind with a machine that uses SATA maybe you can test that drive as there is little you will do on your own to test it.

RD480 Neo2-FI only detects 3 out of 4 gigs of memory HELP!!

Hi guys, I just put together a barebones PC from Tigerdirect. I have 4 1024Mb sticks of ULTRA DDR400 memory, the bios and operating system will only detect 3. I have swapped the sticks around, removed one at a time, ect, and they all seem to work by themselves. Has anyone had an issue like this before? My troubleshooting has been limited as I feel consulting with this forum for ideas is probably better then a day of easter egging the problem. Here are my specs. The Bios is the original that came with the board. I havent updated it because I havent heard of any update fixing this problem nor do I have a floppy drive and the MSI update utility is incompatible with the 64 bit version of windows.
-Motherboard type and model (MSI 7194, RD480 Neo2 FI)
-Bios type and revision (American MegaTrends Version 8.12, SMBIOS/DMI Version 2.30) From SISsandra
-CPU type and model (AMD Athlon 64 3700 SanDiego Core Socket 939)
-Memory name, model and quantity (ULTRA ULT30082 PC3200 400MHz, (4) 1024MB modules)
-Video card name and model plus drivers and version (EVGA e-GeForce 7600 GT KO)
-Power Supply name, model and the amp rating for the +3.3V, +5V and +12V lines plus any limitation on the +3.3/+5V combined watts. ULtra V-series 350W 3.3V@18 AMPS, 5V@ 18AMPS, 12V@ 25Amps
-Hard Drives: Seagate, 8 gig IDA hard drive
-Optical Drives: 1 52x cdr
-Microsoft Widows xp pro x64 edition
thanks any help is better then no help...I'm hoping I am just missing a setting or something..thanks again,
Gene

I think this may be an issue with the processor not the motherboard. Athlon 64 processors have the memory controller built-in on the cpu. I dont think the 939 socket A64 rev E6 memory controller can support 8 banks (4 double-sided ddr modules) at 400 MHz. Try to manually force the memory speed to 266 MHz or 333 MHz and you may be able to access all 4gb of ram.
EDIT: I looked around a little and I see suggestions that the problem of being able to max out the banks at 400mhz was already remedied by the E6 revision memory controller, so this may not be helpful Earlier cores had significant memory controller constraints and could not run 4 gb unless you turned down the memory speed or ran single-sided ram (most 512mb and 1gb modules are dual-sided).

My apple tv is registering on my tv - i can see it on my system info screen but the apple tv doesn't show up, as well my imac doesn't seem to let me share - so i don't know whats wrong, why my apple tv isn't working

anybody able to help me with my setup for apple tv. i've followed the directions in the guide and my tv doesn't seem to register in part. it's weird because my tv system info identifies the apple tv but the screen never went black and it doesn't show anything, too, my imac doesn't seem to register the apple tv unit either

I would try connecting it to another tv to see if it works there if it does
then likely your tv can't handle the default resolution and you should lower it on the other tv
if not then you should connect it by usb to the computer and use itunes to restore it's firmware

So im trying to buy logic pro and just recently put enough money in gift cards on my account but every time i click buy app and go to billing info and then click ok it just shoots me to the first screen and did not charge for app how can i buy it ?

so im trying to buy logic pro and just recently put enough money in gift cards on my account but every time i click buy app and go to billing info and then click ok it just shoots me to the first screen and did not charge for app how can i buy it ?

This may sound stupid, but I'm gonna throw it out there anyway. Is it possible, that if I have enough junk on my desktop it might disrupt the signal? It seems odd, but it kind of looks like my signal is strong and relatively steady now that I've cleaned my desktop. I do tend to get very cluttered. I use a lot of reference images and save text clippings to use later... it just piles up very quickly.
So, I wonder if all that extra effort my system has to do keeping up with the junk might have something to do with the drop outs?

System info and my RD480 NEO2 FI

Similar Messages

Maybe you are looking for