System Installer & Backlighting
I wanted to restore my system from a Time Machine backup, so I popped in my Leopard install disc last night. It went through the normal process, rebooting and bringing me to the language select menu. Right when the language select menu comes up, the display turns its backlight off, making it impossible to see anything. I've had to navigate System Installer with the light from my iPhone. I chose to exit System Installer, and boot up from my startup disk, which it did, no problem. The backlight came on when it restarted, and remained on during use. I decided to give it another shot, and went to the System Installer again. The computer restarted, backlight on, then right when the language select menu came up, the backlight went off again. I restored my system using Time Machine backup and, sadly, with the help from my iPhone's backlight.
I find this odd, because I just used System Installer two nights ago without a problem. However, my MBP has been having trackpad issues ONLY in System Installer since I bought it, where the trackpad is lagging and choppy, but still functional to get me around. My MBP was purchased in March, right when the new ones were released.
Thanks for any replies, and I appreciate any comments!
I found the issue. Apparently, both of my Leopard install disks were scratched, so when I tried an alternative one, it worked beautifully. Also, the mouse/trackpad lag problem went away, showing that the damaged DVDs were more than likely the culprit.
Happy computing,
Ian B.
Similar Messages
-
Hi I have a 4 node Windows server 2012 Hyper-V cluster. When I try to run a cluster validation report, everything else is fine but it fails at validate the Operating System Installation Option step. I did some research but couldn't really find any solution.
Anyone knows how to pass this test? Thanks.
Here's the error I get when run the test:
An error occurred while executing the test.
The operation has failed. An error occurred while getting the operating system installation option for node "server1"Hi JasonLiu2002,
Please post the original error information, the current information is so wide that difficult to determine where may have issue and please offer more information about your
server configuration, you can refer the following article to prepare your cluster environment first.
Windows Server 2012 Hyper-V Best Practices (In Easy Checklist Form)
http://blogs.technet.com/b/askpfeplat/archive/2013/03/10/windows-server-2012-hyper-v-best-practices-in-easy-checklist-form.aspx
When you preparing the new cluster on Server 2012 please install the Recommended hotfixes and updates for Windows Server 2012-based failover clusters updates.
http://support.microsoft.com/kb/2784261
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
i have heard about using your system installer disk to "clean-up" your mac. i have two disks, is it the first or second?
and is this the correct route:
1. start mac using disk: (do i insert the disk as the computers turning on.)
2. run app and check/repair permissions: (will this fix any probs automatically or do i have to go in and do it manually)
anything i missed?Hello and welcome to Apple Discussions,
Using your system installer disc, you can use Disk Utility to Verify/Repair disks as well as system permissions. With the machine powered on, insert the first disc. Then, restart your Mac holding down the "c" key until you see the apple. It will now boot from the disk and you can utilize Disk Utility via the Utilities menu. I hope this helps! Here is a website that show you visuals.
Jason -
Hi there
Wonder if anyone can advise me on a BDD 2007 OS deployment issue? (Apologies if this is in the wrong forum, I couldn't see a forum for BDD 2007.)
First of all, this BDD 2007 server and the OSD config was not done by me. For info, it is part of a SMS 2003 infrastructure.
I am trying to get the XP Pro build process working. I am led to believe the config has been completed.
Unfortunately, after booting the pc from the nic, I get an error. This is the order:
- the 'Initializing Windows PE' splash appears for perhaps 15 seconds
- very briefly, the text changes to 'Initializing Network'
- for a second or two only 'Initializing Windows PE' appears again
- then this error message appears:
"SMS Operating System Deployment - The Operating System Installation failed. Please contact your system administrator for assistance. Unspecified Error (80004005)"
I've spent some time looking into this error (80004005) and from what I can gather it possibly means 'access denied'.
I'm assuming after Windows PE loads the first Task Sequence begins, and if this possibly is where the issue lies?
One thing I cannot understand - the first Task Sequence (Initialization) has this command line (as do most, with different .wsf file):
cscript.exe "%SCRIPTROOT%\ZTIGather.wsf" /localonly
However, I cannot access %SCRIPTROOT% at all, Windows says it can't find it. I can run other variables such as %USERPROFILE%, %SYSTEMROOT%, etc, but cannot open %SCRIPTROOT%.
Is it simply the case that I should create a new system variable (that has not been created by whoever built the server)?
Thanks
John HenrySince no one has answer this post, I recommend opening a support case with CSS as they can work with you to solve this problem.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ -
SAP & Microsoft System Installer
Hi all,
Does anyone know if SAP plans to provide MSI (Microsoft System Installer) files for Vista? I believe Vista is requiring this for applications to be Vista certified. Also, do you know if they plan to begin using cab files?
Thanks,
MimiThanks Frank.
From the note #836310 I have got the anser for MSI already.
But for cab file, we still want to know whether SAP will create cab files to work with SMS 2003 for SAP software updates and distribution via SMS? The cab file here doesn't mean a componment of installation, actually it's configured to do SAP
software updates via SMS Software distribution.
I know we can carry out it by SAP Installation Server as well, but seems it's easy to use SMS here...
Thanks,
Wen -
EPM System Installer Prerequisites, 11.1.1.1
hello,
I am starting to install version 11.
The Hyperion EPM System Installer Prerequisites shows an error on the first installer screen:
"Hostname resolved to an IP address".
Did anyone face this error?
I´ve checked the help button and found following tip:
"If you are using a hosts file to resolve your hostname, the host name resolves to the first entry in your hosts file. To prevent potential communication problems in a distributed environment, make sure that the first entry in your hosts file is the machine's fully qualified domain name so that the fully qualified name is stored in the Shared Services Registry."
How can I resolve this issue on my virtuell mashine?
OS:Windows Server 2003, EPM 11.1.1.1, SQL Server 2005
thank you and regardsWe've seen this as well - and the web client is not supported in IE 9 - it's only supported in: Internet Explorer 6.0, , Internet Explorer 7.x, Internet Explorer 8.x, and Firefox 2.0.x.
Considering that IE 9 is being pushed out as an automatically selected important update and Firefox is up to v4.x (Firefox 2.0.x is not even supported anymore), this has already caused us a huge headache. -
"Add Operating System Installer Wizard" Throws Error When Adding OS's
Good Afternoon All -
Okay - I just installed SCCM 2012 in our production environment - whoo hoo!
Going through the initial setup and configuration, I had a few errors that I had to take care of, but was able to figure out what caused them OR just uninstall / reinstall them fixed it. I've got a new issue I can't figure out, though.
On my SCCM 2012 Primary Site Server, I created a folder named Images and shared it to my SCCMAdmin account (full) and SCCM Admin group (full). Inside of it, I created sub folders for each of the OS's that I want to have installers for. For now,
I am working with Windows 7 Professional SP1 x64.
In the console (signed in as SCCMAdmin), I go to Software library, then Add Operating System Installer Wizard. I type in the UNC path going to shared folder, then sub folder holding the ISO file and click Next. I then get an error saying
"The specified path does not contain a valid operating system or you do not have permission to access it. Specify a valid path."
Perhaps I'm doing something wrong, but here's what I've tried to fix it so far...
- Tried pointing it to a folder with the ISO's contents extracted as well as to the Sources folder
- Downloaded the ISO from TechNet so that I know it was fresh - nogo
- Tried adding a Windows 8 ISO I had laying around - nogo
- Checked folder share permissions as well as security ones. I even gave Everyone full access - nogo
- Checked SCCM component and site status - green across the board.
Any ideas? - Thanks!
Ben K.Sorry to bring up a relatively old post, but wanted to relay my experience with this same problem. In my case, I knew all permissions were correct, but I received the same error message. Turns out the problem was that I had only copied the
install.wim file to my Images directory. I then directed SCCM to the Images directory and got the error message. The reason for the error was that SCCM is looking for the folder structure that is on the DVD, namely, the "sources" directory.
By the time I figured this out, I had already copied the entire "sources" directory to the root of my Images directory. I moved all of these files under the Images\Sources directory and went ahead and copied the rest of the DVD to the Images directory.
After doing that, I was able to complete the wizard as expected. Hope that helps someone to not have to waste the same 2 hours that I just did. :) -
Disk utility stuck in the middle of system installation
I have just fitted a new solid state hard drive. My old drive is now where my non functioning Superddrive users to be, which is working fine.
I started by giving my new drive one partition with disk utility. That was fine and I began to install OS Lion. The machine restarted.
Then I got a message to say that my disk was damaged and that I should run disk utility. Within the installer programme I went back and clicked on 'Repair disk'. However disk utility reported no problems. So I tried to repartition my drive. This is where the utility got stuck 'waiting for disks to reappear'. Eventually the machine started getting hot, so a hard restart seemed my only option. Soon I was back in disk utility and still there was no reported damage to my drive. Partition restored, (by selecting 'Erase' rather than 'Partition'), I went on with my installation, but this time was told a recovery partition couldn't be created. Back into disk utility, still no damage but the partition 'erase' is trying to restore is taking forever!
What should I do now? It looks like my plans for a faster system are doomed!I forgot to update you on what has happened since.
I wanted to get back into the system on my old hard drive. Disk Utility was totally stuck and so I hard restarted once more. I seemed to be going round in circles but was glad to see that every time I asked D.U. to repair my new drive it reported that all was well. Eventually, holding down the option key in the vain hope of getting back onto my old drive I found a screen wheere I had the opportunity to start up from the recovery drive, presumeably of my old drive since it had told me it couldn't create one on the new drive.
I followed this and went through the process again. This time it asked me to sign in and get connected to the internet. I soon realised that it was trying to download the install programme which I know takes ages as I did it yesterday. So I quit out of that and was then finally offered the chance of starting up in my old drive.
Running D.U. from my old drive revealed loads of red writing. I'm currently searching for my Disk Warrior CD in the hope that it may be reparable as D.U. doesn't seem to be able to do much.
I can't believe these SSDs are so fragile! They are surely the same technology as the seemingly indestructible flash drives we all carry around on our keyrings and yet I've now had two of these fail me on system installation. Maybe I should just put a flash drive in my computer and have done with it! -
In ABAP+Java system installation
Hi,
I installed ABAP+Java system On that i installed XI 3.0 SR1.I after applying the J2EERTOS11_0-20000118.SAR patch on J2EE engine.This patch consist of lot of bugs.I just stopped the installation of patch.After again when i log on to J2EE engine with port 50000.Its showing no page dispaly on localhost.I checked the J2EE instance.J2EE instance running properly.Even i can't log in to SDM and J2EE administartor.
Before patching I can able to log in.But now its loging failing.
May be the error is at 50000 port.I installed everything on one Central instance.
Need urgent reply.Hello,
i think that you want to patch your j2ee-server. Therefore you have to download four parts for PATCH SP11.
Support Packages and Patches > SAP NetWeaver > SAP NETWEAVER SAP NETWEAVER 04 > Java Server:
J2EERT11_0-10001982.SAR (Part 4/4)
SAPINST10_0-20000118.SAR
J2EERTOS11_0-20000118.SAR
CTRL<database>11_0-20000118.sar
You have to download all these files and extract then in one folder - there you have to use the sapinst and install the patch.
I hope i understood your requirement the right way.
Regards,
Andr'e -
ERROR in SAP System Installation
Hi gurus!!
We are trying to install a SRM system (EBP4.0) into existing database (oracle 9.2) - MCOD mode - but when we run the installation the process terminates with the next error in sapinst.log
ERROR 2008-08-29 11:16:50
CJS-00084 SQL Statement or Script failed. Error Message: Executable /oracle9/app/product/9.2/bin/sqlplus returns 1.
We also see in the ora_sql_results.log the next error:
2008-08-29, 11:16:50 SAPINST ORACLE start logging for
connect / as sysdba ;
@@"/tmp/sapinst_instdir/oradbusr.sql"
exit;
Output of SQL executing program:
Error 6 initializing SQL*Plus
Message file sp1<lang>.msb not found
SP2-0750: You may need to set ORACLE_HOME to your Oracle software directory
SAPINST: End of output of SQL executing program /oracle9/app/product/9.2/bin/sqlplus.
SAPINST found errors.
SAPINST The current process environment may be found in sapinst_ora_environment.log.
2008-08-29, 11:16:50 SAPINST ORACLE stop logging
We think that the problem is that the installation process set the oracle_home environment variable as "/oracle/<SID>/920_64" although we specified in the input fields of the installation screens that the oracle_home must be other one (we can see the environment variables set up by the installation process in the sapinst_ora_environment.log file)
2008-08-29, 11:16:50 SAPINST Current process environment:
_=./sapinstexe
LANG=en_US
LOGIN=root
MAQ=oracle2desa
PATH=/usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/bin/X11:/sbin:/usr/java14/jre/bin:/usr/java14/bin:/usr/local/bin:/usr/opt/ifor/ls/os/aix/
bin:/oracle9/app/product/9.2/bin
LC__FASTMSG=true
EDITOR=/usr/bin/vi
HISTFILE=//.history/root_U233767
LOGNAME=root
MAIL=/usr/spool/mail/root
ORACLE_SID=BYD
LOCPATH=/usr/lib/nls/loc
PS1=$MAQ ($LOGNAME) $PWD->
USER=root
AUTHSTATE=compat
DEFAULT_BROWSER=netscape
DISPLAY=HOR491702K:0.0
SHELL=/usr/bin/ksh
ODMDIR=/etc/objrepos
JAVA_HOME=/usr/java14/jre
HOME=/
TERM=vt220
MAILMSG=[YOU HAVE NEW MAIL]
ORACLE_HOME=/oracle/BYD/920_64
PWD=/tmp/sapinst_instdir
TZ=NFT-1DFT,M3.5.0,M10.5.0/03:00
TTYUSER=U233767
A__z=! LOGNAME
NLSPATH=/usr/lib/nls/msg/%L/%N:/usr/lib/nls/msg/%L/%N.cat
LIBPATH=/tmp/sapinst_instdir:/sapmnt/BYD/exe
dbms_type=ORA
dbs_ora_schema=SAPR3
dbs_ora_tnsname=BYD
DIR_LIBRARY=/sapmnt/BYD/exe
NLS_LANG=AMERICAN_AMERICA.WE8DEC
ORACLE_BASE=/oracle
SAPDATA_HOME=/oracle/BYD
SAPSYSTEMNAME=BYD
SAPINST: End of current process environment.
Maybe if we changed the control.xml file we could solve the problem but we have already try it without luck, so can anybody tell us wich line of control.xml file must we change?
Anybody knows other solution for this issue?
Thank you very much in advanced,
Edorta RamosIF it is windows OS. Please right click on My computer icon on the desktop> properties>Advanced --> Environmental Variables > Click on NEW> Give variable name as JAVA_HOME and variable value as path of jre (Ex: C:\j2sdk1.4.2_04\jre) Once entered say OK.
In System variables section. select for path and click on edit. go the last and enter ";" and give the path for bin directory (Ex: C:\j2sdk1.4.2_04\bin).
Hope it is help full. -
I have encountered the dreaded "The specified path does not contain a valid operating system or you do not have permission to access it. Specify a valid path" message that seems to be popular in many forums .... BUT, so far none of the "solutions"
have fixed the problem (of I don't understand the fix)
Configuration
SCCM 2012 SP1 5.0.7804.1000
WADK 8.100.26629.0 < Suggested Fix
Server 2008 R2
SCCM Administrator with UserID = SCCMAdmin
Steps / Fixes I have followed
I have configured a administrative share
\\caleb\sources$ to hold directories (such as Apps, Drivers, and OS) with the following NTFS Permissions
EVERYONE has Read and Execute, List folder, Read permissions<o:p></o:p>
SYSTEM has Full Control
<Suggested Fix
SCCMManagers (our group that has all SCCMManagers) has Full Control<o:p></o:p>
SCCMAdmin (the SCCM Admin account that we are using to import image) has Full Control<o:p></o:p>
Local Administrators (the local machine administrator) has Full Control
<Suggested Fix
<o:p></o:p>
Another Fix is to explicitly grant all permissions to the SCCM Administrator
<Suggested Fix
>Administrative Users ...
Properties of the SCCM Administrator (for us that is SCCMAdmin) has all the boxes checked<o:p></o:p>
Another suggestion I was able to glean was to Specify the Network Access Account
so I configured SCCMAdmin as the Network Access Account.
Another potential fix is that the image ISO file that has been downloaded is corrupt. So, I downloaded the Win 7 (and Win 8.1) ISO's from MSDN and did a Checksum check.
I then mounted the ISO (on 2008R2 I use VirtualClone Drive) and copied the contents of the image to
E:\Sources\OS\en_windows_7_professional_with_sp1_vl_build_x86_dvd_u_677896 for Windows 7 with SP1
To double check,
I computed the Hash on the Install.WIM located in the Sources directory and compared with
the computed Has Tag for the Install.WIM on the ISO Image ... and the Hash tag of the WIM's matched (extracted vs what is contained within the ISO)<o:p></o:p>
I tried to load the images into SCCM 2012 using the "Operating System Installers" option
UNC to installer
\\caleb\sources$\OS\en_windows_7_professional_with_sp1_vl_build_x86_dvd_u_677896
Then I receive the lovely message <o:p></o:p>
"The specified path does not contain a valid operating system or you do not have permission to access it. Specify a valid path"<o:p></o:p>
<o:p> </o:p>
From
C:\Program Files (x86)\Microsoft Configuration
Manager\AdminConsole\AdminUILog\SmsAdminUI.log<o:p></o:p>
<o:p> </o:p>
\r\nSystem.Management.ManagementException\r\nGeneric failure \r\n
at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus
errorCode)
at System.Management.ManagementObject.InvokeMethod(String
methodName, ManagementBaseObject inParameters, InvokeMethodOptions options)
at
Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.ExecuteMethod(String
methodClass, String methodName, Dictionary`2 methodParameters, Boolean
traceParameters)\r\nManagementException details:
instance of SMS_ExtendedStatus
Description = "Failed to get the image property from the source WIM
file due to error 80070002";
ErrorCode = 2147942402;
File ="e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\\sspimagepackage.cpp";
Line = 586;
Operation = "ExecMethod";
ParameterInfo = "SMS_OperatingSystemInstallPackage";
ProviderName = "WinMgmt";
StatusCode = 2147749889;
\r\n<o:p></o:p>
What am I missing ???? I assume something simple but, darn I'm stumped!!!Hi,
Configuration Manager version
Windows AIK or Windows ADK Version
Windows PE versions for boot images customizable from the Configuration Manager console
Supported Windows PE versions for boot images not customizable from the Configuration Manager console
System Center 2012 Configuration Manager with no service pack
Windows AIK for Windows 7
Windows PE 3
None
System Center 2012 Configuration Manager with SP1
Windows ADK for Windows 8
Windows PE 4
None
System Center 2012 Configuration Manager with SP1 and cumulative update 2
Windows ADK for Windows 8
Windows PE 4
Windows PE 3.11
System Center 2012 Configuration Manager with SP1 and cumulative update 3
Windows ADK for Windows 8
Windows PE 4
Windows PE 3.11 and Windows PE 5
System Center 2012 R2 Configuration Manager
Windows ADK for Windows 8.1
Windows PE 5
Windows PE 3.11
Please try to install the Windows ADK for Windows 8.
http://www.microsoft.com/en-us/download/details.aspx?id=30652
For more information, please review the link below:
http://technet.microsoft.com/en-us/library/gg682187.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Initial Settings in SAP PI 7.3 after System Installation
Hi,
We are installing SAP PI 7.3 here. After media installation by BASIS team, what all other things an SAP PI consultant should maintain/configure(initially before start working on scenarios) ?
Since I have worked on SAP PI scenarios where the SAP PI server was completely ready(set up). This is the 1st time I'm working on completely new SAP PI system.
So please guide me at the earliest.
Thanks,
Amit PatilHi All,
This document explains more of "How to set up demo examples?"
But I want to do initial settings in fresh SAP PI 7.31 system post-installation. Since I have not done this before at all, I need the help step by step.
I am aware of what all things to be done in fresh SAP PI system like
RFC connections between ECC-PI and CRM-PI,
SLD connections between ECC-PI and CRM-PI,
Maintain Integration and Application Systems in SLD,
Checking Adapter & Integration Engine Status in PI,
Etc.
Please I need help desperately. -
Thanks,
Amit Patil
Message was edited by: Moderator -
Got stuck at import abap phase during system installation from system copy
hi,
we have ECC6 ehp4 sp5 level system (linux + db2), due to some reasons our quality system was crashed, we took homogeneous system copy of Production server through sapinst and now we are restoring in Quality server through sapinst. during import ABAP phase its taking long time to pass and system message its showing is
waiting 6134 minites for DDL template file DDLDB6.tpl in dump directories.
i stopped installation and once again started restoration through system copy. Now the system go stuck at the same phaseHi,
AFAIK, report SMIGR_CREATE_DDL should be run in se38 before starting the export. This generates the required DDL statements which are needed for system copy.
For more info, refer system copy guide in http://service.sap.com/instguides. Hope this helps.
Rgds,
Soujanya -
OS X system installation always starts on reboot.
Using OSX 10.7.5 on my iMac 2006.
The problem started when my address book always crashed on startup.
Would try and log in as another user to see if the address book started.
Started wrong login user = Guest, and it wanted to install osx. I stopped by rebooting.
The only way to get the computer to not start installing osx on startup is that I hold
down the shift key and start in safe mode.
Any idea of getting the computer to not start with the installation of osx or not to start in safe mode?
Checked startup accounts, users, startup items.
No USB sticks, CD / DVDs or hard drives connected.
FredrikHello Fredrik,
Thank you for providing so much detail with the startup issue you are experiencing. I found a couple of resources that may help with the issue you are experiencing.
First, I recommend verifying Macintosh HD OS X, 10.7.5 is selected as the Startup Disk in System Preferences:
Change your startup disk for every startup
Choose Apple menu > System Preferences, and then click Startup Disk.
If necessary, click the lock icon and type the name and password for an administrator user.
Click the icon of the disk you want to use, and then click Restart.
You can find the full article here:
OS X Lion: Change your startup disk
http://support.apple.com/kb/PH3706
If the issue persists after verifying this setting, I recommend resetting the NVRAM/PRAM on your computer:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
You can find the full article here:
About NVRAM and PRAM
http://support.apple.com/kb/HT1379
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Hi SAP Gurus,
i want to install a indipendend sap teststing system (Netweaver 7.4).
I installed the system and the installation was finished completely. But i can not see SAP_APPL on the system?
For the installation i have used Software Provisioning Manager 1.0 and following options
SAP NetWeaver 7.4
MS SQL Server
SAP Systems
Application Server ABAP
Standard System
Do i need to activate it in transaction SPRO or have i used the wrong installation medium?
Best regards,
KlausHi,
You can read the following notes to see what SW components come with SAP Netweaver and SAP ERP.
789220 - Support Package levels for SAP NetWeaver install./upgrades
774615 - Support Package levels of ERP/ECC installations/upgrades
Regards
Maybe you are looking for
-
Raw update on Lightroom - problem with photos during import
Hi I recently did an update provided by Adobe to help improve the "raw converter /import" or something like that, and now when I upload my photos - they change and become dark, the histogram looks awful... how do i go back to the way it was before..
-
Cashflow reporting based on TB as per IFRS
Hello, I have a client who recently migrated from SAP Business one 8.81 to 9.0 PL8. They have been using the cash flow selection criteria to create a cash flow statement based on the Chart of Accounts and then make manual adjustment to fit IFRS repo
-
I need to remote program an HP4193A vector impedance meter, but I do not have a manual nor can I find a Labview driver. I basically need to know the gpib syntax for setting the frequency. I can read the values just by sending a read command. Please h
-
File Error: could not complete your request because an unexpected end-of-file was encountered
I saved a painting I was working on in photoshop for the past week, went to open it up this morning and got the following error: could not complete your request because an unexpected end-of-file was encountered. I tried opening it up in other program
-
Zone alarm has been disabled.
Firefox updated and disabled Zone Alarm. Does this mean I no longer have a firewall? So my computer is not as protected as it was?