System Integrator Job Opening

We're looking for someone with experience in designing, developing and building automated test systems. 3 years LabVIEW experience is required. Please email resume to [email protected] Questions can be forwarded to the same email.
Must be able to work at our office in Greater Toronto Area (Canada).
Thank You
Michael Aivaliotis
Michael Aivaliotis
VI Shots LLC

Dear Sir / Madam,
I am an experienced engineering professional skilled in Post Silicon Validation by Automating using LabVIEW, Power Measurements, Jitter Measurement & Analysis, Audio Characterizations, Silicon Validation Test Cases, Multi-Channel Data acquisition and Triggering using NI DAQ Cards, Control Systems, Serial Communications using VISA and Serial I/O Interface, Code Native Interfaces, Call Library functions to interface with third party and custom dlls, ATMEL and PIC Micro Controller programming, Temperature Controllers like Honeywell, ESPEC-641, TestEquity 115, Hand held terminal programming to drive servo motors, C/C++/VB Programming for developing embedded applications.
Good experience on Windows API, protocol implementations, ARM11 & ARM7TDMI on-chip programming using Register Map and Pinout Specs using C/C++ Metrowerks Code Warrior and MULTI-ICE for ARM Debugger.
Looking for L1/H1 Job
Thank you for your time and consideration.
Please find an attachment of my resume in MS-Word format.
Sincerely yours,
K.Sowjanya. B.Tech
Message Edited by Support on 04-04-2008 08:39 AM

Similar Messages

LabView Control System Engineer Job Opening - Seattle

LabView Control System Engineer Job Opening - Seattle
Seattle Safety is looking for a qualified individual to fill an
opening for Software Controls Engineer. Seattle Safety designs,
manufactures, and installs advanced crash test sled systems that are
used in automotive and aeronautical industries. The duties of the
Controls Engineer include:
Maintain existing control software code base, written in LabVIEW (including the Real-Time Module).
Improve existing software based on requirements and requests from customers and colleagues.
Troubleshoot and repair any functional software bugs that may arise.
Continuously investigate opportunities for system improvement through new or alternative hardware or software approaches.
Support installations of crash test equipment at on-site locations worldwide.
Provide technical support for team members locally and abroad
in subject matters concerning performance, installation, and
maintenance of software and data acquisition hardware.
Maintain professional relationships with suppliers and vendors in order to keep up with industry developments.
Furthermore, the ideal candidate would possess the following skills:
Beginner-to-intermediate knowledge of LabVIEW.
Passing understanding of binary logic.
Familiarity with at least one low-level programming language (Assembly, C, COBOL, etc)
Ability to analyze empirical data against theoretical predictions to enhance and improve mathematical model of system.
Familiarity with data acquisition concepts and hardware.
Ability to troubleshoot electrical and electronic systems at the module and equipment level.
Discipline and organization with respect to software
maintenance and version management. Experience with source
configuration management tools a plus (CVS, ClearCase, Perforce, etc.)
Experience with sophisticated high-speed feedback control systems
General skills in areas such as frequency domain analysis,
systems analysis, digital filtering, and both linear and non-linear
signal processing.
BSCS, BSEE, or BSCmpE are preferred but not required depending on experience.
Ability to work both alone and with colleagues to solve problems and to weigh the merits of differing approaches.
Pay is commensurate with skills and qualifications of the applicant.
Contact:
Seattle Safety
John Covey
(253)395-4321
822 3rd Ave S
Kent, WA 98032
[email protected]

Dear Sir / Madam,
I am an experienced engineering professional skilled in Post Silicon Validation by Automating using LabVIEW, Power Measurements, Jitter Measurement & Analysis, Audio Characterizations, Silicon Validation Test Cases, Multi-Channel Data acquisition and Triggering using NI DAQ Cards, Control Systems, Serial Communications using VISA and Serial I/O Interface, Code Native Interfaces, Call Library functions to interface with third party and custom dlls, ATMEL and PIC Micro Controller programming, Temperature Controllers like Honeywell, ESPEC-641, TestEquity 115, Hand held terminal programming to drive servo motors, C/C++/VB Programming for developing embedded applications.
Good experience on Windows API, protocol implementations, ARM11 & ARM7TDMI on-chip programming using Register Map and Pinout Specs using C/C++ Metrowerks Code Warrior and MULTI-ICE for ARM Debugger.
Looking for L1/H1 Job
Thank you for your time and consideration.
Please find an attachment of my resume in MS-Word format.
Sincerely yours,
K.Sowjanya. B.Tech
Message Edited by Support on 04-04-2008 08:39 AM

High-Level LabView Control System Engineer Job Opening - Seattle

High-Level LabView Control System Engineer Job Opening - Seattle
Seattle Safety is looking for a qualified individual to fill an opening for Senior Software Controls Engineer. Seattle Safety designs, manufactures, and installs advanced crash test sled systems that are used in automotive and aeronautical industries. The duties of the Controls Engineer include:
Maintain existing control software code base, written in LabVIEW (including the Real-Time Module).
Improve existing software based on requirements and requests from customers and colleagues.
Troubleshoot and repair any functional software bugs that may arise.
Continuously investigate opportunities for system improvement through new or alternative hardware or software approaches.
Support installations of crash test equipment at on-site locations worldwide.
Provide technical support for team members locally and abroad in subject matters concerning performance, installation, and maintenance of software and data acquisition hardware.
Maintain professional relationships with suppliers and vendors in order to keep up with industry developments.
Furthermore, the ideal candidate would possess the following skills:
Intermediate-to-advanced knowledge of LabVIEW.
Ability to analyze empirical data against theoretical predictions to enhance and improve mathematical model of system.
Familiarity with data acquisition concepts and hardware.
Ability to troubleshoot electrical and electronic systems at the module and equipment level.
Discipline and organization with respect to software maintenance and version management. Experience with source configuration management tools a plus (CVS, ClearCase, Perforce, etc.)
Experience with sophisticated high-speed feedback control systems
General skills in areas such as frequency domain analysis, systems analysis, digital filtering, and both linear and non-linear signal processing.
BSEE, BSME or BS Physics may be a good fit, but not limited to these areas.
Ability to work both alone and with colleagues to solve problems and to weigh the merits of differing approaches.
Pay is commensurate with skills and qualifications of the applicant.
Contact:
Seattle Safety
Tom Wittmann
(253)395-4321
1222 6th Av N
Kent, WA 98032
[email protected]
Attachments:
ServoSled Brochure.pdf ‏1215 KB

Dear Sir / Madam,
I am an experienced engineering professional skilled in Post Silicon Validation by Automating using LabVIEW, Power Measurements, Jitter Measurement & Analysis, Audio Characterizations, Silicon Validation Test Cases, Multi-Channel Data acquisition and Triggering using NI DAQ Cards, Control Systems, Serial Communications using VISA and Serial I/O Interface, Code Native Interfaces, Call Library functions to interface with third party and custom dlls, ATMEL and PIC Micro Controller programming, Temperature Controllers like Honeywell, ESPEC-641, TestEquity 115, Hand held terminal programming to drive servo motors, C/C++/VB Programming for developing embedded applications.
Good experience on Windows API, protocol implementations, ARM11 & ARM7TDMI on-chip programming using Register Map and Pinout Specs using C/C++ Metrowerks Code Warrior and MULTI-ICE for ARM Debugger.
Looking for L1/H1 Job
Thank you for your time and consideration.
Please find an attachment of my resume in MS-Word format.
Sincerely yours,
K.Sowjanya. B.Tech
Message Edited by Support on 04-04-2008 08:39 AM

How do I stop the system integration box opening on start up

I don't want to set thunderbird as my default email client. I have been in and unchecked to check on start up but it is stall asking me ever time I start up. How do I stop this. Running windows 7 SP1

We went around this one a while ago. It turned out that the poster wanted to use webmail by default, but a browser won't by itself be recognized as a valid email client.
Is there an alternative email client you want to use as default? What happens if you set it as the default?
If you want to use the browser you'll probably need to find a notifier add-on or applet that can field any requests for email management and thereby launch the browser. .

LabView Software Programmer Job Opening - Seattle

LabView Software Programmer Job Opening - Seattle
Seattle Safety is looking for a qualified individual to fill an opening for Software Programmer. Seattle Safety designs, manufactures, and installs advanced crash test sled systems that are used in automotive and aeronautical industries. The duties of the Software Programmer include:
Work with current team members with varying levels of LabView to restructure existing crash test software and to do so in such a manner as to ensure each are able understand and work with code.
Supports all aspects of software application design, development, testing, deployment, and support.
Analyze the current and future needs of the software in order to properly select the type of architecture and structure best suited for the new application.
Perform software testing at a unit and integration level to ensure expected behavior.
Comments code clearly and consistently throughout the development process.
Prepare and maintain software flowcharts, layouts, and diagrams as needed to demonstrate solutions to outside staff.
Troubleshoot and repair any functional software bugs that may arise.
Investigate opportunities for system improvement through new software approaches.
Furthermore, the ideal candidate would possess the following skills:
Expert knowledge of LabVIEW.
Passing understanding of industrial controls.
Familiarity with a minimum one low-level programming language (C, C#, VB, Ladder, etc)
Familiarity with data acquisition concepts and hardware.
Discipline and organization with respect to software maintenance and version management. Experience with source configuration management tools a plus (CVS, ClearCase, Perforce, etc.)
Experience with sophisticated feedback control systems.
Experience with LabVIEW RTOS and PC Real Time Computers
BSCS, BSEE, or BSCmpE are preferred but not required depending on experience.
Ability to work both alone and with colleagues to solve problems and to weigh the merits of differing approaches.
Pay is commensurate with skills and qualifications of the applicant.
Porsche ServoSled facility near Stutgart Germany

Job is open again, see updated description here.
Please note at this time we are NOT accepting applications from outside the US.

Labview Programmer Job Opening - Santa Clara, CA

Software
Engineer/LabView Programmer
OptiMedica
is looking for an experienced Software Engineer/LabVIEW Programmer to support
the development and production of its expanding line of innovative ophthalmic
instruments. Candidate must be familiar with LabView programming and Software
best practices, be familiar with medical device environment and its
regulations, and have the ability to quickly solve challenging problems. Candidate will function as a key software architect
for complex medical systems.
Strong skills and
experience with LabVIEW programming for FPGA, LabVIEW applications, and higher
level applications on Windows operating systems are required in order to develop
automated test, measurement, data acquisition, and control systems. Must be able to work with limited
guidance/supervision and be able to test, evaluate, document, qualify and
release designs for complex projects involving medical laser equipment in a
focused, highly collaborative multidisciplinary environment.
Skills/Experience
Requirements:
o
Highly
developed problem solving, communication and collaborative skills.
o
At
least five years experience developing automated test, measurement, data acquisition,
and control systems using LabVIEW. Experience
developing OEM products a plus.
o
At
least five years experience working with product development team to transfer new
products into production for commercial sale.
o
Key
participation in the test and integration of successfully shipped medical
products is strongly preferred.
o
Successful
track record delivering innovative software solutions to complex problems.
o    Familiar with
Electrical Safety, EMC/EMI Qualification Testing & Design Requirements for
Medical Equipment.
o
Fast
and eager at learning and applying new technology.
o
Familiarity
and experience with verification and validation phases for medical device
software.
o    Knowledge, experience
and understanding of software development standards.
o
Experience
with lasers, optics, motion control, and image processing.
o
Experience
with National Instruments hardware (especially FPGA); experience with a variety
of programmable instruments a plus.
o
Experience
using structured, specification driven, requirements-based approach to software
design and development.
o    Must be well
organized and enjoy working in a dynamic environment.
o    Facility with Qt, MATLAB and C++ beneficial.
Responsibilities:
o
Design,
develop, qualify, implement and release designs for FDA-approved medical laser
equipment using LabVIEW.
o
Support
R&D, Production, and Field Service of FDA-approved medical products in the form of
automated tests and control systems using LabVIEW.
o
Participate
in design review and hazard/risk analysis meetings.
o
Create
test procedures to verify the safe and proper software operation of FDA-approved
medical products.
o
Pursue
continuing education and certifications, including NI Certified LabVIEW
Developer and Architect.
o
Work
in a team environment with other engineers (of varied disciplines) as well as executives
and manufacturing personnel to sustain existing products and deliver new
products to market.
o
Apply
software principles and concepts to evaluate new designs for function and
performance. System integration of new
components and designs into high performance optical and opto-mechanical systems
and sub-systems.
o
Collect/
review data and communicate both status and recommendation on technical issues
by preparing technical reports and presentations.
o
Initiate,
execute & review product changes via OptiMedica’s ECO process.
o
Provide
continuous support for manufacturing and resolve complex manufacturing issues.
o
Develop
test methods, system test procedures and create test and qualification reports
for new product introduction.
o
Reports
to Director of Product Development.
Education Requirements:
o
Bachelor’s
degree in Computer Science, Electrical Engineering or equivalent strongly
preferred.
Site Location/Contact
Information:
o
Santa
Clara, California
Note:
Candidates must be legally authorized to work in the United States.
NOTE: This job description is not intended to be
all-inclusive. Employee may perform
other related duties as negotiated to meet the ongoing needs of the
organization.
Contact:
Debbie Goedicke - 650-585-6784
[email protected]

Labview Programmer

What is the role of system integration?

hi friends,,
i got job in one company. they gave me the role of system integration. may i know what is the role of it? what type of topics i should prepare tharoughly? give me suggestions and some work

Hi Srinivas
Pls follow the below mentioned links to know more about system integrator's job:
http://en.wikipedia.org/wiki/System_integrator
http://www.cmcltd.com/sbu/systems_integration.htm
http://www.artima.com/lejava/articles/javaone_2007_talend.html
http://www.bitpipe.com/tlist/Systems-Integration.html
Pls reward points.

Unit testing and system integration testing for crystal report

Hi gurus,
I am creating crystal report by oracle procedure, will you please tell me how to do unit testing and system integration testing? appreciate very much.

The focus of this forum is report design. The actual testing of reports would be subject to your own internal policies and procedures.
Jason

Download to application server using job open/close

Hello people,
Currently I am using open/close dataset to download to the application server automatically. What I do here is submit a program execute in background when the report is done the report is automatically downloaded to the application server.
My problem now is that I want to use job open/close. With this, unfortunatley, my current method of open/close dataset will be unsuable to download to application server once the background job is done.
My question is, is there a way for me to automatically download a file to the application server using the job open/close method?
Thank you so much and take care.

<b>Hi,
What you can do is to write a report program that downloads the data to the file on the app server.
Now, you can use the JOB_OPEN and JOB_CLOSE and submit this program in the background which will write the file.
Regards,
Ravi</b>
So what you are saying is that I create two programs, where the job open/close program is the one I will run?
Problem is that I plan to get the values of the selection-options from the original program using the program with the job open/close. How will that work.
Thanks

Error in Local Message System: Error when opening an RFC connection Message

Hi Gurus,
We are not able to create support messages in our ECC production system but it can created in Development and Quality. Support message created appears in solution manager system. ECC System displays error message as
Error in Local Message System: Error when opening
an RFC connection Message was Not Created
I have checked RFC connection between ECC and Solution Manager which displays following message
Logon     Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: partner "local:sapgw00' not reached
Error Details     LOCATION: SAP-Gateway on host local / sapgw05
Error Details     DETAIL: NiPConnect2
Error Details     CALL: connect
Error Details     COMPONENT: NI (network interface)
Error Details     COUNTER: 40142
Error Details     ERROR NUMBER: 10060
Error Details     ERROR TEXT: WSAETIMEDOUT: Connection timed out
Error Details     MODULE: nixxi.cpp
Error Details     LINE: 2835
Error Details     RETURN CODE: -10
Error Details     SUBRC: 0
Error Details     RELEASE: 701
Error Details     TIME: Wed Jan 11 23:26:54 2012
Error Details     VERSION: 38
Kindly Help.....

Hi
Based on the instance number of the servers, you can determine the gateway to be used.
IF your ECC instance number is , 01 then gateway would be , sapgw01 (in ECC system)
So check and change the settings accordingly, in the RFC connection. Also check, if this entry sapgw01 is made in /etc/service file. Also check, in transaction smgw for gateway parameters.
Hope this info helps,
~ Raj

Under APPLE MENU system preferences only opens sporadically, mostly not

Under APPLE MENU system preferences only opens sporadically, mostly not. I booted up with installation disk and ran a check but everything was alright. However, when I tried to click on items using the disk as a startup disk it frequently wouldn't function.

George,
Thanks for asking that question.
I offered this solution based upon similar successful advice which was given to another poster who solved this problem:Long story short I ended up reinstalling Mac OS X using Archive and Install. When I first used the computer following reinstalling Mac OS X, I was able to access the System Preferences by selecting them under the Apple in the menu bar. However, I have now updated my software using Software Update, and now I can't access System Preferences when I click on them under the Apple in the menu. The computer just acts like I never selected System Preferences.
Where have System Preferences gone??? provides another example of Previous Systems folder interfering with System Preferences.
Applications don't work after reinstalling Mac OS X explains a different problem with a Previous Systems folder: Example 1: You downgrade by performing an Archive and Install installation, but do not update to a later version of Mac OS X. The Previous Systems folder contains later versions of applications that may contribute to this issue.If you have proper backups, I recommend trashing the Previous Systems folder as soon as you can determine that the new system is functioning properly. The Previous Systems folders will either take up too much space or contribute to unexplained system problems.
;~)

Unable to find my system in Job and BI monitoring workcenter after configuring BPMon.

Dear Experts,
I had configured BPMon for background job monitoring, I had activated monitoring objects but could not see my system in Job and BI monitoring workcenter. Please provide some inputs on how to debug this.
Thanks,
Phani.

i see it this way, as long as the underlying existing call interface supports the existing database type it should be just working fine

Software Job Opening (Ann Arbor, MI)

You can view the job opening at this link. Do not contact me as you MUST follow the link and proper process.
http://tbe.taleo.net/NA9/ats/careers/requisition.jsp?org=ADVANCEDPHOTONIX&cws=1&rid=13

Mmmm. Not in academics or football.
I'd like to point out that our coach did not have a heart attack from the shock of beating ND.
[Prayers for his recovery]
You do have good women though...or at least you did when I found my wife there many years ago.

BI System Integration using EP iView Template

Hi,
Can u plz provide me POC, step by step process of below 2 que.
1. BI System Integration using EP iView Template.
2. BI System Integration using Federated Porta
Thanks
Prakash

Hi,
select your workset or folder where you should create the iview. Right click, it show you context menu, put create iview. You will have any options, one is BI, select this option.
Best Regards,
Conrado
www.forosap.com spanish forums

In System Prefereneces, when I am in Desktop and Screen Saver, I am unable to remove folders. I can click the "-" and the folder appears to be gone, but when I close and then reopen System Preferences, and open Desktop and Screen Saver, the folder reappea

In System Prefereneces, when I am in Desktop and Screen Saver, I am unable to remove folders. I can click the "-" and the folder appears to be gone, but when I close and then reopen System Preferences, and open Desktop and Screen Saver, the folder reappears in the list. I have tried deleting preferences "plist" but I am totally unable to remove the folders.

I've seen one other report like yours, and I think the issue is caused by a bug, but I don't know what triggers it.
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

System Integrator Job Opening

Similar Messages

Maybe you are looking for