System is getting hanged while creating Adobe Form Layout

Hello,
I have Adobe Lifecycle Designer and Adobe Document Service Installed on our server, i have created Adobe form interface in transaction SFP and then a new form created with this interface passing the parameter carrid.
While creating from layout, through library section I used Text function, as I drag and drop text in to the layout, system is getting hanged everytime with message 1.275 bytes transferred.
Gurus please help me to understand this error.
Thanks,
Avinash

Get Adobe life cycle designer updated vesrion.
Also check your desktop/laptop if it has good RAM .
Adobe is quite fat application which depend upon ur sys prefomanc.
Hope this will help.
Thanks Dhiraj.

Similar Messages

Getting Error while generate Adobe form

Hi,
I am new to adobe smartforms, i am getting one error while activate smartform. we need to set anything in SICF setting for Adobe smartform??. i am get error like "this forms refers to external file which is not found in compters.please create connection to folder so thatt these should be found.

Hi
Are you talking about adobe forms or smartforms. These are 2 different types of forms. For Adobe forms you need an ADS which sits on the java stack and needs to be configured properly. Some services need to be activated in SICF for the configuration as well. A conplete guide on how to configure the ADS is found on the following link
[https://www.sdn.sap.com/irj/sdn/adobe?rid=/webcontent/uuid/90355269-4d89-2a10-0bb9-f388704f1dcd]
Regards
Thashin

Getting dump while calling adobe form

Hello All,
I am working on a webdynpro application and within the application I am calling a adobe form, when I call the adobe form I am getting the following short dump:
Error in the ABAP Application Program
The current ABAP program "CL_WD_ADOBE_SERVICES==========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "/1BCDWB/SAPLSM00000027 " in
include "/1BCDWB/LSM00000027F01 " in
line 587:
"Field "BKPF-WAERS" is unknown. It is neither in one of the specified t"
"ables nor defined by a "DATA" statement. ."
I looked at the adobe form and the interface and the field WAERS is being defined there but I am not sure then why I am getting this dump.
Can you please help me on this.
Thanks,
Rajat
Moderator message: wrong forum, please have a look in the dedicated "Web Dynpro ABAP" forum.
Edited by: Thomas Zloch on Feb 9, 2011 3:23 PM

Hi,
Try to generate the interface and adobe form and also the generated FM "/1BCDWB/SAPLSM00000027"
Regards,
Srini.

Error while downloading adobe form layout in sap

Hi all,
When I try to download adobe form it is showing the following pop up boxes and not allows me to download the layout .Please suggest me how to solve this issue.
Thank You,
Suneel.

Hi Suneel,
it seems like its an issue with permissions.
Make sure your user has permission to write (save) a file to your computer.
Adam

While transfering Adobe form to PS(Project system) getting Error.

Hi Experts,
I am getting error While transfering Adobe form to PS getting Error.
The asdobe form we are using is DPR_STATUS_REPORT_AIF and enhancement implementation is DPR_STATUS_REPORT_AIF.
I am getting the following error.
Error occurred when generating the print preview (function module: /1BCDWB/SM00000006)
ADS: com.adobe.ProcessingException: com.adobe.Processin(200101 )
Please help me with this.
Thanks in advance
Subhaskar

Hi Max,
Yes its in Active. Even i can be able to see the print form in SFP transaction.
But the problem is coming when we are transfering the adobe form to PS(Project System).
Regards
Subhaskar

Getting special character while saving adobe form from portal

Hi All,
I am getting Special character while saving adobe form. I am using webdynpro java application, in which I am using download file UI element.We are facing this issue after support packs were implemented in staging system.
Kindly advise.
Regards
Shashwat

Hi,
We have ABAP system as backend system seperately and Single sign on is configured.
when we access the portal with domain name line http://hostname.domain/52000/irj/portal, we are able to access the adobe form which is develope on abap system without any issue.
but our issue started when we are trying to access portal only with hostname as http://hostname:52000/irj/portal
we are able to login to portal but when we are trying to open the adobe form we are getting error
No switch to HTTPS occurred, so it is not secure to send a password
Since you have configured SSL, I assume that this configuration is done with fully qualified hotsname. Hence the certificate is generated based on this hostname.
Now when you access your portal without typing fully qualified hostname, system is unable to locate a relevant certificate. Hence it lands up with a message "No switch to HTTPS occurred, so it is not secure to send a password"
Hope this answers your query
Regards,
Deepak Kori

Error occured while showing adobe form in abap webdynpro application

Dear SAP-Masters ,
This is the mail regarding the error occured while showing adobe form in abap webdynpro application .
When i run the adobe form seperately it works fine but with abap web dynpro , i'll get following error .
Pls tell me how to resolve this problem .
The following error text was processed in the system D35 : WebDynpro Exception:
The error occurred on the application server DV35_D35_00 and in the work process 2 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: UPDATE_PDF of program CL_WD_ADOBE_SERVICES==========CP
Method: CREATE_PDF of program CL_WD_ADOBE_SERVICES==========CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L7STANDARD==============CP
Method: CONV_VIEW_INTO_VE_ADAPTER_TREE of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
Method: SET_CONTENT_BY_WINDOW of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
Method: RENDER_WINDOWS of program CL_WDR_CLIENT_SSR=============CP

Hi Arjun ,
            Thanx for ur reply ,
            i got following results in ST22 dump analysis :
' An exception occurred that was not caught ' .
        and
Source Code Extract
Line
SourceCde
79
x_xml = get_wd_context_as_xml( data_source = data_source ).
80
m_pdf_object->set_data( formdata = x_xml ).
81
catch cx_fp_exception into lr_fpexc.
82
raise exception type cx_wd_general
83
exporting
84
previous = lr_fpexc.
85
endtry.
86
if fillable = abap_true.
87
       if m_version is initial.
88
         m_version = m_pdf_object->get_version_info( ).
89
       endif.
90
       if version < ''.
91
         set_usage_rights( m_pdf_object ).
92
       endif.
93
endif.
94
endif.
95
endif.
96
97
only call the ads if requested
98
if execute_ads_call = abap_true.
99
try.
100
      set document
101
m_pdf_object->set_document( pdfdata = pdf ).
102
103
      execute, call ADS
104
m_pdf_object->execute( ).
105
106
      get result
107
m_pdf_object->get_document( importing pdfdata = pdf ).
108
catch cx_fp_exception into lr_fpexc.
>>>>>
raise exception type cx_wd_general
110
exporting
111
previous = lr_fpexc.
112
endtry.
113
endif.
114
115
endmethod.
and
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_WD_GENERAL', was not caught and
therefore caused a runtime error.
The reason for the exception is:
WebDynpro Exception:
The occurrence of the exception is closely related to the occurrence of
a previous exception "CX_FP_RUNTIME_SYSTEM", which was raised in the program
"CL_FP_PDF_OBJECT==============CP",
specifically in line 255 of the (include) program
"CL_FP_PDF_OBJECT==============CM02Y".
The cause of the exception was:
ADS: com.adobe.ProcessingException: PDF is not interactive. Data can only be
|    imported into interactive forms.(201501).

Transaction code for creating adobe forms

hi guys,
i was trying to learn adobe forms. can anyone tell me the t.code like where to create adobe forms.
points will be awarded generously.

Hi,
t.code SFP.
definition:
Interactive Forms based on Adobe software is SAP's new solution for forms development. Its first release has the focus on interactive use of forms. High-volume printing is supported in principle, but - being a new solution - the performance has not yet reached the same level as Smart Forms or SAPscript, two established solutions that had years to grow. Interactive Forms is the only solution that will continue to be enhanced with new features, while SAPscript and Smart Forms will be supported without limitations.
When (or if) to move to Interactive Forms depends on your requirements. For interactive forms usage, i.e. the new functions, you have no choice, as the existing solutions don't support it. High-volume print scenarios need to be carefully analyzed to see whether your concrete requirements can be met at this point.
However, it is possible to move to Smart Forms and design your forms in such a way that a migration at any point in the future would be but a small step. Smart Forms offers from Web AS 6.40 a migration wizard to Interactive Forms. Technically, everything can be migrated, but we recommend against things like ABAP program nodes, for example.
You are not forced to ever go to Interactive Forms if you don't want to. It really depends on whether your client needs any of the new features in Interactive Forms. Also, if they are currently working with JetForms, they could enquire with Adobe directly what migration path they offer to the joint solution.
go thru this links
http://help.sap.com/saphelp_nw04/helpdata/en/d2/4a94696de6429cada345c12098b009/frameset.htm
example
To get an overview idea about Adobe forms ,
Using SFP , first you need to create a interface . in interface you can declare the import and export parameters and also the declaration part, coding etc : This is nothing but similar to Function module interface.
And now we have to create the Form which is interactive. Create the form and enter the interface name which you have created in first step, so that the parameters , declarations of fields etc : will be copied and available in the form layout. So that you can drag and drop these declared fields ( dclared fields of interface ) to the layout.
Create the context and layout in the form.
The layout generated can be previewed and saved as PDF output.
Now we need to integrate the driver program and the PDF form to get the final output as per the requirement.
On activating and executing the form you will get a function module name just similar to smartforms.
The driver program needs to call this FM.
Refer to the below sample code :
DATA : is_customer TYPE scustom.
DATA : it_bookings TYPE ty_bookings.
DATA : iv_image_url TYPE string.
DATA : iv_sending_country TYPE adrc-country.
DATA : it_sums TYPE TABLE OF flprice_t.
DATA : docparams TYPE sfpdocparams.
DATA : formoutput TYPE fpformoutput.
DATA : outputparams TYPE sfpoutputparams.
PARAMETERS : pa_cusid TYPE scustom-id.
SELECT SINGLE * FROM scustom INTO is_customer
WHERE id = pa_cusid.
SELECT * FROM sbook
INTO CORRESPONDING FIELDS OF TABLE it_bookings
WHERE customid = pa_cusid.
outputparams-nodialog = 'X'.
outputparams-getpdf = 'X'.
*outputparams-adstrlevel = '02'.
CALL FUNCTION 'FP_JOB_OPEN'
CHANGING
ie_outputparams = outputparams
EXCEPTIONS
cancel = 1
usage_error = 2
system_error = 3
internal_error = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
docparams-langu = 'E'.
docparams-country = 'US'.
docparams-fillable = 'X'.
CALL FUNCTION '/1BCDWB/SM00000043'
EXPORTING
/1bcdwb/docparams = docparams
is_customer = is_customer
it_bookings = it_bookings
IV_IMAGE_URL =
iv_sending_country = 'US'
IT_SUMS =
IMPORTING
/1bcdwb/formoutput = formoutput
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'FP_JOB_CLOSE'
IMPORTING
E_RESULT =
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Reward points
Regards
pc

Berkeley DB JE is getting hanged while calling environment sync method.

Hi,
I am developing an application in Java and I am using JE edition of Berkeley. I am facing an issue, during shutdown operation I am calling syn method of EntityStore class and Environment class.
The EntityStore.sync() is getting completed but during executing of Environment.sync() the control is not coming out of this statement. Below is the code that I am using to perform sync operation.
if (myEnv != null) {
try {
entityStore.sync(); //Calling sync method of Entity Store Class.
log.error("Finished Syncing of Entity Store");
myEnv.sync(); // Calling Sync method of Environment Class. Control is not coming out of this sync call.
log.error("Finished Syncing of Environment");
} catch (DatabaseException dbe) {
log.error("DataBase exception duing close operation ",dbe);
} catch (IllegalStateException ie) {
logger.fatal("Cursor not closed: ", ie);
During my unit testing I was changing system date and perfoming some db operation. While I during down the application the the above code gets executed but the system is getting hanged and control is not coming out of Environment sync method call. Can some one tell why the sync is causing the system to hang.
Thanks in advance.

Hello,
You did not mention the version of BDB JE. In any case for BDB JE questions the correct forum is at:
Berkeley DB Java Edition
Thanks,
Sandra

Getting error while creating the Shopping cart.

Hi ,
I am getting error while creating the Shopping cart.
a.Error in account assignment for item 1 (Item Testing SC )
b.Duplicates of Cost Centre T10063 are defined in SRM (Item Testing SC )
Kindly provide the solutions.
Thanks,
Dev

Try the following in the ERP backend system:
Standard Hierarchy Inconsistencies
Issue: one Cost Center is repeating in more than one node in Cost Center Standard Hierarchy.
Update from SAP Global support, the following was the email received:
in transaction KSH3 please run both the ambiguity and completeness check(Menu -> Extras -> Check and Help functions).
If you think that your standard hierarchy is inconsistent you can check that as following:
Run transaction Extras -> Hierarchy - Master data -> Test. The result shows you if there are in consistencies. If that is the case run also Extras -> Hierarchy - Master data -> Comparison.
Alternatively, you can run the report 'RKCORRH1' (TN SE38).
Run both the Hierarchy->Master data->test and the
Hierarchy->Master data->comparison.
As stated above inconsistency message showed after Test. Run the comparison and you get a similar message.
Once the above two are run, again when you go to test, the inconsistency disappears.

GUI crashes while Executing ADOBE Form

Dear Expert,
Please resolve my Problem,
whenever I am trying to Execute Adobe Form, GUI is getting Crashed, Whereas when ever Basis Person is opening on his System he is able to Execute ADOBE Form, He told that there is a memory Problem, Memory Required For Executing this adobe Form should be at least 1GB RAM, But i have 504 MB RAM. Please tell me is it the Reason For Crashing GUI whenever Executing Adobe Form or Something Else.
On my system i have Adobe Reader 9.
Regards
Shelly Malik

Check your installation using [Adobe Document Services Configuration Guide|http://help.sap.com/saphelp_NW70EHP1/helpdata/en/37/504b8cbc2848a494facfdc09a359b1/frameset.htm] and also check OSS [ Note 944221 - Troubleshooting if problems occur in forms processing|https://service.sap.com/sap/support/notes/944221]
Regards,
Raymond

Unable to see web service listed while creating the form on webservice

Hi All,
i created a web service reference and tested it and i m even getting the response of it .
but i m unable to see the webservice being listed ...while creating a form on webservice .
whereas if i create a process on webservice .. i can find webservices in the webservice list .(.the webservice which i created in the shared component)
can anyone help me ...
Thanks & Regards,
Nandini Thakur.

that should be an easy one. you might not have the GP roles needed. give to your user the caf roles in the UME

Getting error while creating users in Peoplesoft

Have a good day
new fresh instance installed , getting error while creating users in peoplesoft
SQL ERROR FUNCTION SQLExec
ERROR POSISTION 52
RETRUN 904- ORA-00904 PSWDREQUPPER invalid identifier statement, select minpsdlength
pswdreqspecial pswdreqlower
PSWDREQUPPER, PSWDREQDIGITS,ALLOWDOPRID,PSWDEXPIRESDAYS FROM PSSECOPTIONS
original statement: SELECT MINPSWDLENGTH PSWDREQSPECIAL PSWDREQLOWER PSWDREQUPPERS
PSWDREQDIGITS, ALLOWOPRID, PSWDEXPIRESDAYS FORM PSSECOPTIONS

>
RETRUN 904- ORA-00904 PSWDREQUPPER invalid identifier statement, select minpsdlength
pswdreqspecial pswdreqlower
PSWDREQUPPER, PSWDREQDIGITS,ALLOWDOPRID,PSWDEXPIRESDAYS FROM PSSECOPTIONS
original statement: SELECT MINPSWDLENGTH PSWDREQSPECIAL PSWDREQLOWER PSWDREQUPPERS
PSWDREQDIGITS, ALLOWOPRID, PSWDEXPIRESDAYS FORM PSSECOPTIONS
>
How is it possible that the first statement has ALLOWDOPRID column that does not exist, where as the original statement has ALLOWOPRID which does exist?
How is it possible that the second original statement has two more errors:
PSWDREQUPPERS should be PSWDREQUPPER
FORM should be FROM.
Please provide the actual error which is being raised, without editing.
Hakan

Getting error while creating the variable of Schema Element type

Hi everybody,
For creating a variable of schema element type I am doing the following steps...
Select 'Variables' after right clicking on bpel process. IN this window, go to 'Create VAriable' then select 'Element' type. Now in Type Choose, I expanded the my imported schema files. And selected a element type, then click ok to create this variable... I am getting the message...
IN ORDER TO SAVE IMPORTED WSDL/SCHEMA FILES, YOU MUST HAVE A PARTNER LINK LOCATED UNDER THE CURRENT PROJECT DIRECTORY.
What is mean by that.
I have imported the schema files in project. AFter that I have imported them into the WSDL also. Now why I am getting error while creating the variable. However I can create variable directly in .BPEL file then everything is fine. And it is working also. But what is mean with the above error? Why I am not able to create variable through GUI?
Thanks.

Hi,
I have this same problem this morning, and I was going crazy, until I found this webpage on the internet:
[http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process|http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process]
The idea is that the jdeveloper is not very good working with directories with spaces on the directory name. If you move all your work to a directory without spaces, it will work smoothly. At least, it had worked for me.
Regards,
Nacho

Error when create adobe form

Hi,
When i created adobe form, i found an error :
Could not start Layout Designer (see long text)
Message no. FPUIFB086
Diagnosis
The forms design tool for developing the form layout could not be started; either it is not installed or there are errors in the installation.
Procedure
Make sure that you have the forms design tool installed on your desktop (the tool is part of the SAPGUI installation).
Also read SAP Note 801524.
In my computer Adobe Life Cycle Designer 8.0 installed, why it happen?
Please help me.
Thank you.
regards,
Ferry

Good to know — there is no such application as "Adobe XI".
"Adobe" is the name of the company.
"XI" is indicative of the use of either Acrobat XI or Reader XI.
Neither Acrobat XI Pro (for which Adobe provides a free, fully functional 30-day trial) nor Adobe Reader XI (the free to download and use PDF viewer that Adobe provides) have an "Export PDF" entry under "File".
"Export PDF" only is present in Adobe Reader XI over on the right on the "Tools" panel.
The "Tools" panel provides a way for a user of Adobe Reader XI to connect to various By Subscription online services (gotta pay eh).
Export PDF is one of these. A subscription lets you send a PDF file to the online internet service (aka "cloud" service). The service then exports to a supported file format (Word / Excel / ...) and the user selects / directs where the output file is to be saved on the user's local machine.
Of course to use any of the online subscription services one must have an active (paid up in full) subscription to the service.
So ---- As described the puzzle pieces don't fit eh.
What specific Adobe (the company) applications are you using?
Acrobat XI Pro? Adobe Reader XI? Both?
Be well....

System is getting hanged while creating Adobe Form Layout

Similar Messages

Maybe you are looking for