System is looking in the wrong place for modules.[SOLVED]

I did a pretty big system update last night that ended up breaking a pretty big portion of everything. No usb, network interfaces, trackpad, etc. Checking logs the biggest issue is clearly this:
modprobe: FATAL: Could not load /lib/modules/2.6.26-ARCH/modules.dep: No such file or directory
And yeah, that directory doesn't exist, there is a 2.6.27-ARCH in there though, but the system is using the 2.6.26 kernel, and 2.6.27 is not in /boot
Ideas?
Last edited by nxn (2008-11-11 06:25:40)

Code:
modprobe: FATAL: Could not load /lib/modules/2.6.26-ARCH/modules.dep: No such file or directory
And yeah, that directory doesn't exist, there is a 2.6.27-ARCH in there though, but the system is using the 2.6.26 kernel, and 2.6.27 is not in /boot
Hmm... modprobe manpage says that you can override the kernel version found by uname. You have to use
modprobe --set-version 2.6.27-ARCH yourmodule
for modprobe to look up the file in the right directory. HTH
joe

Similar Messages

IPhoto - My iPhoto is not responding. When I click on iPhoto I get a never ending spinning beachball. I almost think it is looking in the wrong place for the pictures. How do I redirect it back to the Mac hard drive?

My iPhoto is not responding. Whenever I click on the iPhoto icon I get a twirling beachball. It is as if the machine is looking in the wrong place for the photos. How can I see where the machine is looking to find out if this is really the problem. How can I see the path?

Try this: launch iPhoto with the Option key held down and create a new, test library. Import some photos and check to see if the same problem persists. If it doesn't then the problem lies with your current library.
If that's the case Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Glossary tab is looking in the wrong place for the Glossary file

Running 11.0.3.268.
I am testing the Responsive layout. In my test project, the TOC, Index, and Search tabs are all functional, but when I click the Glossary tab, I get the IE "This page can't be displayed" message. The path listed on this page is:
C:\My_Stuff\Docs\Help Output\ResponsiveHTML5\ProfitX\template\PROFITX_2\glossary1.htm
I can see, however, that the glossary file is actually located at:
C:\My_Stuff\Docs\Help Output\ResponsiveHTML5\ProfitX\glossary.htm
Can anyone tell me where can I adjust my settings so that the generated project will be able to find the glossary file?
Thanks!

Thank you for clarifying where I needed to look. After modifying the Glossary.slp references in the Index, Table of Contents, and Topic .slp files, I was able to get the Glossary content to show up in the generated responsive layout, at all resolutions. Getting this fixed is great. Thanks!
Curiously though, when I now click the Search tab/button, I get this:
Since this used to work, all I can think is that I've unintentionally broken something in an .slp file. I didn't touch any reference to Search in those files, but something isn't right. I'd appreciate it if you could glance through the recently modified sections of the .slp files (below) and let me know if anything looks amiss. Thank you.

I am trying to configure my SCXI-1540 card for excitation voltage and frequency using MAX - but it is not giving me that option when I click on the card and then properties, am I looking in the wrong place?

I am trying to configure my SCXI-1540 w/1315 card for excitation voltage and frequency using MAX - but it is not giving me that option when I click on the card and then properties, am I looking in the wrong place?
I have LabVIEW Express 7.0 Professional - SCXI-1000 Chassiss - along with SCXI-1112, and SCXI 1520/1314 - cable to the PCI-6052E is attached to the 1520 card.
MAX says it recognizes all the cards in the chassiss.

Jeremy, Thanks for the reply.
I tried to set up the system as DAQmx.
I had MAX auto-detect the set-up - and it recognized all the cards - but did not select the 1315 accessory on the 1540 card - I had to do that manually - but in the configuration section I would select the accessory and it would deselect itself. I had to get out of the set-up and then right click on the 1540 card and click on the "Accessories" tab and select the 1315 terminal block that way.
It didn't seem right that the system should behave that way, but I pressed onward.
I then tried to create a new DAQmx Task
When I create new DAQmx task and then click on Analog Input no "Position" Tab appears for me to select, all I get are:
Analog>>Voltage
Analog>>Temperature
Ana
log>>Strain
Analog>>Current
Analog>>Resistance
Analog>>Frequency
Analog>>Custom Voltage with Excitation
Do you think there might be something wrong with either my hardware or perhaps my configuration that is not allowing it to recognize the 1540/1315 in DAQmx?
I had included the system report of what programs I am using, etc. as attached file nireport.txt
After the DAQmx did not work I tried installing everything as Traditional DAQ and it did let me set-up the 1540 Card with Excitation Voltage and Frequency and gain - I then went in to the VI that I had built and tried to use the Express DAQ Assisant to read the channel that I am connected to on the 1315/1540 - when I try to use DAQ Assistant it gives me an error saying that "Device not available in NI-DAQmx. It is possible that the device is being use by traditional NI-DAQ"
Which I guess it is since both configurations are now set-up in MAX.
I would PREFER to use the DAQmx set-up, but I am confused as to WHY it won
't come up with
Analog input>>POSITION>>LVDT
When I try to create a new DAQmx task.
Thanks for the help so far! As you can probably tell I am new at this.
Ryan
Attachments:
nireport.txt ‏2 KB

I have logic pro, soundtrack pro will not open i get an error message what do i do? i cant find the receipts ive checked my library am i looking in the wrong place?

I have logic pro, soundtrack pro will not open i get an error message what do i do? i cant find the receipts ive checked my library am i looking in the wrong place?

I get the same kind of thing..
I'm on osx 10.7.2 and once I click the soundtrack pro icon I get an error message. I had problems with logic pro & my digi002r soundcard midi drivers but now is fixed (using a midi adapter).
here is the code:
Process:         Soundtrack Pro [1705]
Path:            /Applications/Soundtrack Pro.app/Contents/MacOS/Soundtrack Pro
Identifier:      com.apple.soundtrackpro
Version:         3.0.1 (960)
Build Info:      SoundtrackProProject-9600000~277
Code Type:       X86 (Native)
Parent Process: launchd [140]
Date/Time:       2011-10-18 13:12:05.201 +0200
OS Version:      Mac OS X 10.7.2 (11C74)
Report Version: 9
Interval Since Last Report:          195725 sec
Crashes Since Last Report:           3
Per-App Crashes Since Last Report:   2
Anonymous UUID:                      23728D81-590B-4C3A-8C67-1709945CD132
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: /Library/Application Support/ProApps/*/ProFX.framework/Versions/A/ProFX
Referenced from: /Applications/Soundtrack Pro.app/Contents/MacOS/Soundtrack Pro
Reason: image not found
Binary Images:
    0x1000 -   0x7f7ff8 com.apple.soundtrackpro (3.0.1 - 960) <77CF322B-8BBE-AAEA-173F-75A237035319> /Applications/Soundtrack Pro.app/Contents/MacOS/Soundtrack Pro
0x947000 -   0x94bfe6 +STPInterleave (??? - ???) <E87D1F34-6D97-63DB-454C-CF3D1B03F8E5> /Applications/Soundtrack Pro.app/Contents/Frameworks/STPInterleave.framework/Versions/A/STPInterleave
0x952000 -   0x98ffff com.apple.vmutils (4.2.1 - 107) <43B3BFA5-8362-3EBD-B44B-32DCE9885082> /System/Library/PrivateFrameworks/vmutils.framework/Versions/A/vmutils
0x9a9000 -   0x9f5ffb com.apple.audio.midi.CoreMIDI (1.8 - 42) <CBD34EBC-0FFD-34B4-B55A-BE1F61EF4BD8> /System/Library/Frameworks/CoreMIDI.framework/Versions/A/CoreMIDI
0xa18000 -   0xc3eff7 com.apple.prokit (7.1.1 - 1511) <498819A4-1BDD-3671-8796-E11865BCFBCE> /System/Library/PrivateFrameworks/ProKit.framework/Versions/A/ProKit
0xd49000 -   0xd49fff com.apple.iokit.dvcomponentglue (2.0.7 - 2.0.7) <1CFA5944-AB33-3A41-B4D2-4A624A514C0D> /System/Library/Frameworks/DVComponentGlue.framework/Versions/A/DVComponentGlue
0xd4d000 -   0xd54fff com.apple.AEProfiling (1.2 - 22) <43A46C32-8E13-82DD-8AF1-2A40690BF810> /Applications/Soundtrack Pro.app/Contents/Frameworks/AEProfiling.framework/Versions/A/AEProfiling
0xd5e000 -   0xd6dfff com.apple.AERegistration (1.2 - 77) <5D18C47F-6F9E-0C4C-8875-24A14A97186D> /Applications/Soundtrack Pro.app/Contents/Frameworks/AERegistration.framework/Versions/A/AERegistration
0xd81000 -   0xd83fff com.apple.ExceptionHandling (1.5 - 10) <6CA9446C-7EF9-35EE-BDF2-AA8D51E93E9E> /System/Library/Frameworks/ExceptionHandling.framework/Versions/A/ExceptionHand ling
0xd89000 -   0xe49fff com.apple.omf_framework (1.1.0 - 1.0) <ED5F21BC-18CD-D7F7-3D2E-F7F856BC0D40> /Applications/Soundtrack Pro.app/Contents/Frameworks/OMF.framework/Versions/A/OMF
0x11000000 - 0x1102afeb com.apple.proapps.ControlSurfaceSupport (2.0 - 68) <BD914236-49D8-9C9A-E8D6-CBC1738850B3> /Applications/Soundtrack Pro.app/Contents/Frameworks/ControlSurfaceSupport.framework/Versions/A/ControlS urfaceSupport
0x8fe88000 - 0x8feba9c7 dyld (195.5 - ???) <134323A7-49DC-3A9D-ACFD-32FAD0FD6BA2> /usr/lib/dyld
0x90840000 - 0x90992fff com.apple.audio.toolbox.AudioToolbox (1.7.1 - 1.7.1) <7646E131-08EE-3D72-ADA2-4A61C562B36E> /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
0x90993000 - 0x90993ff2 com.apple.CoreServices (53 - 53) <7CB7AA95-D5A7-366A-BB8A-035AA9E582F8> /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
0x91e60000 - 0x92036fe3 com.apple.CoreFoundation (6.7.1 - 635.15) <AC9F6462-6315-3D89-8075-D048DB4DBF7E> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x924a8000 - 0x92509ffb com.apple.audio.CoreAudio (4.0.1 - 4.0.1) <089D78E0-46A6-38DB-9545-7F35CC815939> /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
0x93281000 - 0x9328ffff com.apple.opengl (1.7.5 - 1.7.5) <81166D23-DE8E-3938-AAD3-29B1FA5E446E> /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
0x93331000 - 0x93331fff com.apple.vecLib (3.7 - vecLib 3.7) <8CCF99BF-A4B7-3C01-9219-B83D2AE5F82A> /System/Library/Frameworks/vecLib.framework/Versions/A/vecLib
0x93332000 - 0x93493ffb com.apple.QuartzCore (1.7 - 270.0) <0916DA83-6400-3FEA-BC53-5F4BA4D126EC> /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore
0x94326000 - 0x9436dfff com.apple.SystemConfiguration (1.11.1 - 1.11) <CA6CE2B6-DC18-31FF-9668-70BB2FD8D7BB> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x94420000 - 0x946a5fe3 com.apple.QuickTime (7.7.1 - 2306) <F8C64DC4-3FE4-3A06-B10B-59E7F3BA6FDD> /System/Library/Frameworks/QuickTime.framework/Versions/A/QuickTime
0x97dd0000 - 0x98082ff7 com.apple.security (7.0 - 55010) <BE0350C5-5221-3BFF-B674-646AB1BA0F2E> /System/Library/Frameworks/Security.framework/Versions/A/Security
0x99d12000 - 0x99d76fff com.apple.framework.IOKit (2.0 - ???) <D14460ED-2B6C-375D-B3A4-B8C82E922666> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x9adc8000 - 0x9adc8fff com.apple.audio.units.AudioUnit (1.7.1 - 1.7.1) <2E71E880-25D1-3210-8D26-21EC47ED810C> /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
0x9aef1000 - 0x9aef1fff com.apple.Carbon (153 - 153) <6FF98F0F-2CDE-3888-A304-4ED447D24CE3> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
0x9b2ec000 - 0x9b2ecfff com.apple.Cocoa (6.6 - ???) <650273EF-1ABC-334E-B745-B75AF028F9F4> /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
Model: iMac12,1, BootROM IM121.0047.B0A, 4 processors, Intel Core i5, 2.5 GHz, 4 GB, SMC 1.71f21
Graphics: AMD Radeon HD 6750M, AMD Radeon HD 6750M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x02FE, 0x45424A3231554538424655302D444A2D4620
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x02FE, 0x45424A3231554538424655302D444A2D4620
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.58.4-P2P
Bluetooth: Version 4.0.1f4, 2 service, 18 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: WDC WD5000AAKS-402AA0, 500,11 GB
Serial ATA Device: HL-DT-STDVDRW GA32N
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 3
USB Device: USB to Serial-ATA bridge, 0x04fc (SUNPLUS TECHNOLOGY CO., LTD.), 0x0c25, 0xfa120000 / 6
USB Device: iLok, 0x088e, 0x5036, 0xfa130000 / 5
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 7
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x850b, 0xfa200000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: UM-2G, 0x0582 (Roland Corporation), 0x0106, 0xfd140000 / 5
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfd110000 / 3
FireWire Device: Digi 002Rack, Digidesign, 400mbit_speed
thanks everyone
e

Have os x 10.8.5. have downloaded and installed melodyne essential but when i open garage band i cannot see this vst plugin with my other effects. i also have Reaper installed and it shows up as a vst plugin there. am i looking in the wrong place ? ?

have never used this forum before (obviously) and thought the "ask a question" space was all i had. m;y app.
2 more questions : is melodyne essential compatible with garrage band.
would having Reaper installed interfere with the plugin being installed in GB ?
any help app
rogerdc

answered my own question - i was looking in the wrong place

Menus looking in the wrong pace for files

Several of the pages that are getting called (clicked
on/moused over) have had the subsection name replaced by the word
"templates".
This is happening to all pages which get copy corrections.
I make my modifications to the files sitting on my local
machine.
I save them with "Ctrl S"
I highlight the file in the file list that was still showing
"local view" and then clicked the and small plug icon that makes
the computer "connected to the remote host" I click on the blue up
arrow.
IT WORKS FINE WHEN:
We start at the home page. (www.SDFTI.com.)
Then clicked "About Us" in the menu bar. (This initial
section's index.html page was NOT modified)
Then put the mouse over "Who we are" to activate the drop
down menu, and then clicked "About San Diego."
The "About San Diego" (sandiego.html) page displays and seems
fine. The target being called when it works like this is correctly
shown as www.sdfti.com/about/sandiego.html.
"About San Diego" was modified this morning.
I was careful to only change copy and text alignment.
HOWEVER, THE WEBSITE FAILS AFTER VISITING A MODIFIED PAGE IN
A SECTION:
Trying to connect to ANY of the other pages available from
ANY of the dropdown menus in the "About SDFTI" section fails after
visiting a modified page in that section.
Running the mouse over these other dropdowns selections, in
this condition, shows the target calling for an html page preceded
by www.sdfti.com/template/*.html.
There is a bigger problem with the Student Services section.
I modified the copy to the index.html.
The only links that work are those on the menu bar going to
one defined page and the schedule point link in the left-hand image
links.
The links that fail are those from the dropdown menu labeled
"links" and those from the left-hand image labled "Enjoy San Diego"
and "Weather Links."
What did I do wrong? How do I correct it? How do I prevent
it?

> the subsection name replaced by the word "templates".
This means that you have improperly made the links in your
template file.
Can you upload it and post a link to it?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"SD Dazed n Confused" <[email protected]>
wrote in message
news:[email protected]...
> Several of the pages that are getting called (clicked
on/moused over) have
> had
> the subsection name replaced by the word "templates".
> This is happening to all pages which get copy
corrections.
> I make my modifications to the files sitting on my local
machine.
> I save them with "Ctrl S"
> I highlight the file in the file list that was still
showing "local view"
> and
> then clicked the and small plug icon that makes the
computer "connected to
> the
> remote host" I click on the blue up arrow.
>
> IT WORKS FINE WHEN:
> We start at the home page. (www.SDFTI.com.)
> Then clicked "About Us" in the menu bar. (This initial
section's
> index.html
> page was NOT modified)
> Then put the mouse over "Who we are" to activate the
drop down menu, and
> then
> clicked "About San Diego."
> The "About San Diego" (sandiego.html) page displays and
seems fine. The
> target being called when it works like this is correctly
shown as
> www.sdfti.com/about/sandiego.html.
> "About San Diego" was modified this morning.
> I was careful to only change copy and text alignment.
>
> HOWEVER, THE WEBSITE FAILS AFTER VISITING A MODIFIED
PAGE IN A SECTION:
> Trying to connect to ANY of the other pages available
from ANY of the
> dropdown
> menus in the "About SDFTI" section fails after visiting
a modified page in
> that
> section.
> Running the mouse over these other dropdowns selections,
in this
> condition,
> shows the target calling for an html page preceded by
> www.sdfti.com/template/*.html.
>
> There is a bigger problem with the Student Services
section.
> I modified the copy to the index.html.
>
> The only links that work are those on the menu bar going
to one defined
> page
> and the schedule point link in the left-hand image
links.
> The links that fail are those from the dropdown menu
labeled "links" and
> those
> from the left-hand image labled "Enjoy San Diego" and
"Weather Links."
>
>
> What did I do wrong? How do I correct it? How do I
prevent it?
>
>
>

Looking in the wrong directory for class file

My javabean looks like this:
<jsp:useBean id="mailer" class="MailerBean">
<jsp:setProperty name="mailer" property="*"/>
<% mailer.sendMail(); %>
</jsp:useBean>
The actual MailerBean.class file is in ROOT/public_html/servlets directory. The file that uses the above javabean is in ROOT/public_html/clearresults directory. I have tried a bunch of different lines of code to point to the servlets directory with no success. The javabean continues to point to the ROOT/public_html/clearresults/MailerBean.class file when it should point to ROOT/public_html/servelts/MailerBean.class. How can I point the MailerBean class to the servlets directory without moving the file that uses the javabean?

Generally you don't have to write code to say where a class is, and I don't know what "pointing" a class is. Things that run servlets and JSPs have rules about where they will look for classes. All you have to do is put your MailerBean class where the rules say to put it. Often that's a directory called something like .../WEB-INF/classes, but check out the rules for your product.

Lib32-gtk2 looks for theme engines in the wrong place

When starting a 32 bit gtk-app in a 64 bit environment with DE KDE4 I get the following error:
Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/engines/libqtcurve.so: wrong ELF class: ELFCLASS64
I have qtcurve installed as well as lib32-qtcurve from AUR (amongst all other 32 bit libs I need). But lib32-gtk2 seems to look in the wrong directory for loading 32 bit themes. lib32-qtcurve is in /opt/lib32/usr/lib/gtk-2.0/2.10.0/engines/libqtcurve.so instead of the path mentioned in the error warning.
Seems like lib32-gtk2 has a wrong path compiled in. Or is there any lib32-specific conf-file I have to edit?
Harvey

Well, since nobody seems to have a clue I filed a bug report for lib32-gtk2and see what happens.
Harvey
Last edited by Harey (2010-03-15 11:50:25)

Hey, it could be that I'm in the wrong place, but I have a question.

Hey, it could be that I'm in the wrong place, but I have a question.
So we are a gaming community, and we have the privilege of setting up tournaments in (exm) StarConflict.
My question is , where looking for sponsers. I'm not asking mutch (like laptops or what ever) i'm just asking for like steam gift's to or members.
And steam Gift's that we can give away as a price in or tournament... (or any way that we cud get sponserd)
If I'm at the wrong place for this cud you redirect me to the right place?
Thank you for your time, GrZ .

I believe this is a question you need to ask MSI support...mailto:[email protected] They should be able to provide you with the information your looking for, or at least provide you with the direction of where to go. You could also contact some of the other MSI sponsored teams, and look to join them, or ask them how they became sponsored...

Sorry if this is the wrong area for this post.

I am thinking abut the Studio High Definition Powered Isolation Headphones with Noise Cancellation. In trying to find the place with the 2 miles/$1 spent and the lowest price is too much for my drained brain to handle. If anybody knows the place that gives the 2 miles/$ spent and the best price for the exact product please sent it my way. (Not the product but the answer) lol.
I do have a question at Newegg they have a special add-on which I am not sure if it is worth getting. is there somebody who can tell me what this is and if it is worth getting the two together. Finally, the Headphones, I assume, plug into any MBP without any special connector. It would be awesome if they plug into the iPods too but I think there might be a small adapter.
OK back to my main question, should I get the # Monster AICYP 200 S Y-Splitter With Volume Control/Mute. The detail about this combo is helpful to me but still I do not have enough info and lack the practical skills to make the right decision.
newegg show details
newegg hide details
Model
Brand Monster
Model AICYP 200 S
Type Accessories
Features
Features Connects two sets of headphones to iPhone, iPod, MP3 player, laptop, portable CD/DVD/game system, and SmartPhone.
Plugs into any standard 1/8" (3.5mm) mini-headphone jack.
Dual volume controls enable individual listening levels.
Built-in mute switch allows quick breaks without interrupting other listener or pausing device.
Rugged, compact construction ideal for travel and on-the-go use.
Beats by Dr. Dre Studio High-Definition Headphones from Monster newegg
2. Beats by Dr. Dre Studio High-Definition Headphones from Monster
newegg show details
Thanks for any help/advice on the volume/mute add-on.
This s what is holding the big purchase back.

Definitely the wrong place for this post. Try Amazon's forums or Newegg's forums. Also, Google is your friend.

Probably the wrong place to ask this.

I'm not sure where to ask this, but I'm interested in working as an Apple technical support person. My dad wants to know if I can work from my home, but I always thought the Apple tech support people worked in an office somewhere. And would degree or certificate would you need?
Thanks, and I"m sorry that this is the wrong place for this question, I"m just not sure where to ask.

Here's the listing of tech support and related job opportunities. Several pages; some job positions have odd-ish names, but if you click the link under Job Title you'll get a description.
Apple - Jobs at Apple - Search Results

I dont know if im in the wrong place but Im looking for a white MacBook Pro

I dont know if im in the wrong place but Im looking for a white MacBook Pro, I was told the white is cheaper but its not advertised anymore so I had to talk in here to get info? Can somebody please help.THANKS!
<Email Edited by Host>

Click the grey store tab at the top of this site & compare for yourself.

I have been editing project for two weeks and now I get ghosts of other images fromt eh project coming up in the wrong places even though the thumbnail looks right. Help.

Help. I have been editing a project for two weeks and now it gets ghosts of ohter images from the project coming up in the wrong places. The thumbnail has the correct image but the image either does not display and its black or an old image or another one shows.

When I have problems like this I do two things. First I shut down and restart iMovie. Sometimes that rejuggles the date. But I am sure you have been doing that in such a long project.
The Second thing I do is delete iMovie preferences, which can get corrupted.
Home-library-preferences-com.apple.imoviepref
Hugh

Pacman looking for pacman.conf in the wrong place?

When using yaourt, I had been getting an error message to do with pacman.conf not being found. I fixed this by creating my own and saving it in
/usr/local/etc/pacman.conf
(it's the only file in /usr/local/etc)
I then got the error message:
failed to initialize alpm library (could not find or read directory)
After some googling and learning about the find command, I found the following files:
/usr/lib/libalpm.so
/usr/lib/libalpm.so.8
/usr/lib/pkgconfig/libalpm.pc
/usr/lib/libalpm.so.8.0.2
So I'm guessing that I do have the alpm library, but pacman (or Yaourt?) isn't finding it.
Further use of 'find' found the following versions of pacman:
/usr/local/etc/pacman.conf
/etc/pacman.conf
Which then lead me to believe that I have the necessary files but they are in the wrong place or there is a config file (or something) that I need to alter.
Any ideas what I've done wrong and how to correct it?
Thanks, James

I've just tried
pacman -S man-pages
as a test, and it worked ok.
So, Bug Wrangler is probably right. Any ideas how I fix it, or is the solution to start again? If I need to start again, is there an easy way to remove yaourt?
Last edited by james13 (2014-10-05 18:57:00)

System is looking in the wrong place for modules.[SOLVED]

Similar Messages

Maybe you are looking for