System is not allowing GR through MIGO for generic article in SAP Is-Retail

Hi,
I am trying to do a GR into DC through MIGO for a generic article and its variants but system is not allowing it saying " The generic article is not maintained in DC". System by design doesn't allow to maintain generic article for specific site but it does for reference site. It did not say anything at the time of PO creation but throwing error during GR. Looking for help!
Thanks in advance!
Subhankar

awaiting response.

Similar Messages

Merchandise Category creation for Generic Article in SAP IS-Retail

Hi,
Can anyone help me out to with clear and complete process and settings i have to maintain for merchandise category for generic article for shoes of our client. I created merchandise category with the below transaction codes
ct04,clwe,clwe,clw1 and wg21 but when i used to create generic article i have to find characteristics in variants tab in basic data view in mm41 but i didn't find it.
HELP ME with SCREENSHOTS which will HELP ME in FUTURE of our CLIENT
Thanks & Regards
Gopi Krishna
Mobile:+91 9741042296

Hi Manish,
Thank you for your reply which is the procedure for relevance of variants in creation of generic article.My concern is to know complete merchandise category creation with screenshots which i can create by own merchandise category.
Thanks & Regards
Gopi Krishna Potteti

How to remove flag for deletion for an article in SAP IS Retail

Hi,
I wish to know , is it possible to remove flag for deletion at client level for the article (in SAP Retail System) ?
I have already tried to do remove the flag using the tcode MM06 (MM) method.
But the system says that, it cannot be done for the articles maintained using the retail functions.
I there any other Tcode ?
Or it's the end of the road ??
If possible please reply asap.
Regards,
Anirban Roy

awaiting response.

Goods Receipt is allowed through MIGO for PO's though they hav the confirm

Goods Receipt is allowed through MIGO for PO's though they hav the confirmation control key. where as its should allow based on ASN(inbound Delivery).
Not sure if any system changes has to be made or anything else. please suggest.
Thanks

Hi Dear <
You can also recived the goods with reference to inbound Delevery,
1 Select In Confirmation Tab Con con key while in Creating PO
2 Create a Inbound delevry from T.code: VL31n
3 Once you create the Inbound delevery wth reference to PO, The inbound delevery no will be propulated in Confirmation Tab of PO
4 you can Do the mIGO with reference to that Inbound delevery

Without result recording closing system should not allow for usage decesion

Hi
without result recording closing system should not allow for usage decision.I think it is possible through user status. Please tell the procedure .
Thanks and regards,
vairavan

Dear vairavan,
You can check for the authorisation object.I can't remember that authoriation object right now.But surely you can restrict that with authorisation object.
Anyone knows the authoristaion object.
Regards,
Sunil Patil

QA32: Without going in Inspection lot stock screen system should not allow for UD

Hi
At the time of UD "without going in Inspection lot stock screen system should not allow to save the UD".
Please suggest how to restrict.
Regards
Ashish

Please go through the below link & with small changes you can fulfill your requirement using user profile
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/601c82e3-b743-2c10-dbb6-ed4c00167157?QuickLink=index&…

With out goods issue for order system should not allow for order confirmati

Dear all
with out goods issue system should not allow for order/operation confirmation.
how it is possible.
Regrads
Srinivas

Dear ,
In some cases we required to do confirmation or TECO without GI .
We can change it as per req using user exit
Regards,
Ishwar

How to block a payment in F110, when the system does not allow us to block

Hi all
Blocking of a payment happens in the following areas :
1. In a single document Fb02 transaction we can block a document by giving A as option for not paying for that document before going to F110.
2. We can also block a vendor through Vendor master area
3. We can block a Vendor from paying through Xk05.
Now my doubt is that.... i had saved a proposal in F110, after saving it, now i want to block a payment for a vendor. But the system does not allow me to block it. Why the system does not allow the block. Or is there any type of error like this, that system does not allow the block after setting up the proposal for payment.
Can anyone help me out in this...
thanks and regards
SL

Dear,
Even you set payment block after saving the proposal system will execute that payment. So better you delete this proposal and then set payment block in the vendor line item. Thereafter system will pick that bill for payment.
Regards,
Chintan Joshi

System should not allow to delete PO line Item after GR/IR

Hi,
I am working on a SAP Retail Implementation project.
Currently the system is allowing us to delete the PO line items after doing GR or IR against that PO line item. But the clients requirement is that the system should not allow to delete PO line item after doing GR/IR.
We are using Account Assignment Category-N, Item Category-S.
Please let me know if you have the solution for this requirement.
Thanks in advance
Thanks & Regards,
Suresh

Hi,
Standard SAP will not allowed the PO to be deleted once it was GR done. The controlled is on the attributes of message to set as "E"
Message no. 06115
But if invoiced takes place, the is the point that PO can be deleted.
You have to do have a Enhancement using MM06E005, insert you logic here to check PO history tables like EKBE, then check if invoice " Q" (BEWTP) exist, the PO cannot be deleted once the user delete the PO line and SAVE it. Ask you developer to help you on the following coding.
Use MM06E005 and EXIT_SAPMM06E_012
IF SY-TCODE = 'ME22N'.
IF sy-ucomm = 'MESAVE' OR SY-UCOMM = 'YES'..
LOOP AT TEKPO.
IF TEKPO-LOEKZ = 'L'.
SELECT SINGLE BELNR FROM EKBE INTO BELNR1 WHERE EBELN = TEKPO-EBELN AND EBELP = TEKPO-EBELP AND BEWTP = 'E'.
IF SY-SUBRC = 0.
SELECT SINGLE BELNR FROM EKBE INTO BELNR2 WHERE EBELN = TEKPO-EBELN AND EBELP = TEKPO-EBELP AND BEWTP = 'Q'.
IF SY-SUBRC = 0.
Regards,

After creation of PO system should not allow to change the price in PO

Hi There,
In my scenario once PO is created then after send to vendor PO print document,Users are changing the price in PO.so system should not allow to change the price in PO once PO got saved.
So please advice.

Hi,
you could set in customizing for field selection keys the net price
to display for ME22N so that changes can not be made
(transaction OLME -> purchase order -> Define Screen Layout at Document Level).
Please check that you have set all the relevant field selection
groups to display: AKTV, ME22, ME22N... (read and apply note 30316)
Other workaround is try to do by yourself with the badi
ME_PROCESS_PO_CUST and send your own error message.
Regards,
Edit

I have Windows 8 pro on my computer . I un-installed itunes on my computer to re-install itunes 7.1.1 Now the system will not allow the re-install. Can anyone help?

I have Windows 8 pro on my computer . I un-installed itunes on my computer to re-install itunes 7.1.1 Now the system will not allow the re-install. Can anyone help?

I have an HP Officejet Pro 7580 similar to the 8600 you have and after upgrading to Mountain Lion it wouldn't work. HP support site said download updates for Mountain Lion from App Store not their site so I went to software update but there were NO UPDATES FOR 10.8. Tried a million things and could not get printer to work. So I restored back to Lion figuring at least printer worked then only now I can't get it to work with old settings either. I am sick to death of claims by Apple and peripheral manufacturers that everything is compatible all you have to do is get updates well in this case THERE ARE NONE TO BE GOT and I don't have time to **** about trying to find 'work arounds'. There shouldnt be a need for work-arounds. Unless the updates are ready DONT release the new OS. You shouldn't have to be an IT tech to make basic things like printing work. I see also the HP 8600 is even sold by appstore so there is no reason why it shouldn't work with minimum fuss.

System does not allow to void the payment on same day

Dear All,
System does not allow to void the payment on same day in R12. e.g. If payment is made on 18-NOV-2010, system does not allow to void on 18th. We can void payments if void date is greater than payment date.
Please let me know if you have any information to void payments on same day.
Thanks in Adavnce.
Thanks,
Astik

Hello Victor,
the data collection method CCMS_OS_COLLECT is an ABAP report as you can see in the method overview in rz21. This report is used to collect the operating system data and send it to the CCMS.
As soon as you install the sapccm4x agent on an instance the agent will take over the data collection for the operating system subtree (this is also described in [note 522453 |http://service.sap.com/sap/support/notes/522453]. Important: point 4. of the note!). I.e. as soon as the agent is responsible for the data collection you will see the mentioned CCMS_Cpu_Collect_c.
If the MTE doesn't display data you should check if the agent is running.
Regards, Michael

TS3623 I had interruption on rented movie when attempt to return to movie , no library and said to go to downloads , guess what no download setting , will not allow repurchase through Apple TV now have to repurchase through iPad *** have you done to the o

I had interruption on rented movie when attempt to return to movie , no library and said to go to downloads , guess what no download setting , will not allow repurchase through Apple TV now have to repurchase through iPad *** have you done to the old syst

Thanks for the pointers folks. Yeah, 1.5GB is pretty poor isn't it? There are other suppliers, but you have to get a their phone line installed to access the internet so it's an £85 setup fee plus a day off work for a guy to come round and drill a hole in your wall before you even get to the monthly costs.
Don't get me wrong though - I'm certainly not an Apple basher, but am equally frustrated with both them and the ISP.
Virgin Media spend all kinds of money advertising their broadband as the fastest in the UK, but don't tell you (up front anyway) that you'll be cut off if you actually try and use it.
Apple on the other hand carry on with their 'it just works' mantra, but with Apple TV this only applies if you meet certain criteria (again, not mentioned up front).
I guess it aint a biggie, as i was gifted my Apple TV, and love all the other stuff it does, but from the number of posts on this forum can see that there's a lot of angry customers out there who want explanations as to why they're having similar problems to me.
Will be very interesting to see if Apple release any kind of software update that turns the flash drive from a buffer to permanent storage, to at least ease some of the pain...
Message was edited by: McGinty

During PO creation system should not allow to save if it cross the PR value

Hi,
As I said in above subject line while creating the PO system should not allow to create more than the PR value and Quantity.
Always system should allow the person to create the Po with in PR value as well quantity in order to set up please let me know the configuration settings.
thanks in advance.

Hi,
Please search the forum first for your queries for existance and then post queries., coz, the same question has been answered so many times before.

System does not allow to me to change collect method in RZ20

Hi.
I Have the problem with my SAP R/3.
I have productive, based on 4 application servers. In RZ20, alerts of MTE Operating System for one application server is not work. In nodes properties I have collect method "CCMS_Cpu_Collect_c". On other application servers - "CCMS_OS_Collect". System does not allow to me to change collect method
What will I do? Please help me.
Edited by: Viktor Unsub on Jul 18, 2008 4:55 PM

Hello Victor,
the data collection method CCMS_OS_COLLECT is an ABAP report as you can see in the method overview in rz21. This report is used to collect the operating system data and send it to the CCMS.
As soon as you install the sapccm4x agent on an instance the agent will take over the data collection for the operating system subtree (this is also described in [note 522453 |http://service.sap.com/sap/support/notes/522453]. Important: point 4. of the note!). I.e. as soon as the agent is responsible for the data collection you will see the mentioned CCMS_Cpu_Collect_c.
If the MTE doesn't display data you should check if the agent is running.
Regards, Michael

System is not allowing GR through MIGO for generic article in SAP Is-Retail

Similar Messages

Maybe you are looking for