System is not creating in CMC the "Server Intelligence Agent"

Hi Experts,
I installed SBOP Enterprise 4.0 SP2 under
Windows Server 2008 Standard
with .NET Framework 3.5 SP1
without integrated database,
I put it SQL SERVER for CMS and Audit, created from ODBC connection.
before installation whole checks were succeeded
Its make whole installtion fine... but,
when I go to check service in central Configuration Manager
- Apache Tomcat
- BW publisher Services
- SAP BO Authenticaton Mobile server
- SAP BO Processig Mobile Server.
the "Server Intelligence Agent" is not appearing.
I reinstalled many times, its always occuring.
Any1 can have a good solution for this?
thanks
regards

Hi,
I have too experienced this problem in the past. Usually re-installation works , but keep in mind few things while re-installing:
1) If possible do not install in C:/Program Files or C:/Program Files (x86)
2) Always change the SIA name everytime you do a re-installation, and is possible SIA port too.
Regards,
Sonia

Similar Messages

  • The Server Intelligence Agent for this server is unavailable

    Folks,
    Issue surfaces after clustering,above mentioned error appears in properties of each server irrespective of servers  running(pretend) and not running.
    Here,we tried to cluster 4 nodes,first 2 nodes are good no issues,but 3 and 4 nodes have issue.
    I also noticed below message under properties
    " The server is not managed by Server Intelligence Agent. Current command line arguments could not be retrieved. Server restart would be required if the command line arguments are modified. Current command line arguments could not be retrieved. Server restart is required if the command line arguments are modified".
    Environment
    =========
    BOXI3.1 SP5
    Win 2008

    Hi,
    Check attached sap notes.
    1432354 - Error "The server is not managed by Server Intelligent Agent" in a clustered environment
    1498863 - Error: "The server is not managed by Server Intelligence Agent." in all Business Objects Server's properties in Central Management Console.
    Regards,
    Amit

  • Server Intelligence Agent won't start after repair of Business Objects 4.0

    I migrated our company's business objects contents and documents from previous BO 3.1 server to new BI 4.0  server using standard BI tools. (That is, using the export wizard in BO 3.1 to create BIAR file and using upgrade management tool to import this biar file to new BI 4.0 server).
    After that, everything looks fine, I can log in to launch pad and can see all the folders, reports, etc have been moved over.
    But Life Cycle Management stopped working. I guess the reason is, when I created the biar file from source 3.1 server, I basically included everything that may include LCM folder as well, and this folder overwrite the LCM folder in BI 4.0 server. In order to fix this issue, I did "repair" of BI platform. After this, the Server Intelligen Agent won't start.
    Tried to log on to cmc, got error message 
    "Error: Server SERVERTest:6400 not found or server may be down (FWM 01003) null"
    Tried to start the Server Intelligence Agent from "services", got message:"windows could not start the server intelligence agent (servertest) from local computer..." Checked the event log, no much useful information.
    Can anyone please give me some ideas? what might have caused this issue? where should I look to? I hope we don't have to go through uninstall/reinstall.
    thanks.

    Hi,
    check the Task Manager if you have running the processes running "SIA.exe" ans "cms.exe"
    Regards
    -Seb.

  • The system could not create any outputs for mv type 561

    Hi,
    I tried to print out a goods receipt others in MIGO and i received "The system could not create any outputs" when i tick on output control. I tried to follow the steps in How to print the material document in MB1C movement 561 I stuck at step 4 where i cannot find MvT 561. Please help
    Chk your setting as below to get GR print out.
    . Maintain the Printer Name in MM->Inv Mgmt and Phy Inv->Print Control-> Gen Settings-> Printer Setting Enter the local printer where you want to print your Goods posting document
    2. Ensure that in MM->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
    3. In MM->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
    4. In MM->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for Goods Receipt/GI/Transfer Posting Documents
    Here for Particular mvt type 101,201,121,311,313,501,521,561 etcu2026 Maintain the Print item as 1--Material document printout
    5. In MM->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the following--
    Select the particular Output type then goto Details
    a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Transmission medium is 1
    b. Print Parameter is 7
    6. In MM->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Printer Determination by Plant/Str Loc , Maintain the Output device for all your Plants
    7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
    Now the settings are ready for Printing Material doc
    8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
    9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately.

    issue is resolved

  • System should not allow to do the changes in PO once the ID created.

    Hi All,
    Once the Inbound Delivery is Created based on the Purchse Order, System should not allow to do the changes in the Purchase Order like Deletion of Item, etc..
    Any Configuration Changes is avaliable. ?
    Regards,
    Sudhakar

    Dear,
    Please check the staus in order
    Current order status xxxx does not allow goods receipt (Message no. C6009)? is this the message?
    This will not allow you to do GR for production order when you activate status profile "SAT1" in the production order. After that when you confirm order it will automatically assign next user status i.e. "SAT2" (if not assign it manually in CO02) it will allow you to do GR for that production order.
    Regards,
    R.Brahmankar

  • User weblogic is not permitted to boot the server

    Hi,
    I am new to OES and after running the configtool, creating the ASIAuthorizationProvider and ASIRoleMapperProvider (both has Defaul Identity Directory: wls_dir and Application Deployment Parent: //app/policy/wls_app), binding the SSM, i get this error when starting the WLS admin server:
    15:33:26.312 EVENT Starting Jetty/4.2.25
    15:33:26.859 WARN!! Delete existing temp dir C:\BEA_HOME_10\ales32-ssm\wls-ssm\i
    nstance\wls_ssm\work\jar_temp\Jetty__8000__ for WebApplicationContext[/,jar:file
    :/C:/BEA_HOME_10/ales32-ssm/wls-ssm/webapp/arme.war!/]
    15:33:30.515 EVENT Started WebApplicationContext[,ARMEService]
    15:33:32.562 EVENT Started SocketListener on 0.0.0.0:8000
    15:33:32.562 EVENT Started org.mortbay.jetty.Server@176bf9e
    ARME is started now
    <Mar 5, 2010 3:33:33 PM SGT> <Notice> <Security> <BEA-090082> <Security initiali
    zing using security realm wls.>
    <Mar 5, 2010 3:33:34 PM SGT> <Critical> <Security> <BEA-090404> <User weblogic i
    s not permitted to boot the server; The server policy may have changed in such a
    way that the user is no longer able to boot the server.Reboot the server with t
    he administrative user account or contact the system administrator to update the
    server policy definitions.>
    <Mar 5, 2010 3:33:34 PM SGT> <Critical> <WebLogicServer> <BEA-000386> <Server su
    bsystem failed. Reason: weblogic.security.SecurityInitializationException: User
    weblogic is not permitted to boot the server; The server policy may have changed
    in such a way that the user is no longer able to boot the server.Reboot the ser
    ver with the administrative user account or contact the system administrator to
    update the server policy definitions.
    weblogic.security.SecurityInitializationException: User weblogic is not permitte
    d to boot the server; The server policy may have changed in such a way that the
    user is no longer able to boot the server.Reboot the server with the administrat
    ive user account or contact the system administrator to update the server policy
    definitions.
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.do
    BootAuthorization(Unknown Source)
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.in
    itialize(Unknown Source)
    at weblogic.security.service.SecurityServiceManager.initialize(Unknown S
    ource)
    at weblogic.security.SecurityService.start(SecurityService.java:141)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    Truncated. see log file for complete stacktrace
    >
    <Mar 5, 2010 3:33:34 PM SGT> <Notice> <WebLogicServer> <BEA-000365> <Server stat
    e changed to FAILED>
    <Mar 5, 2010 3:33:34 PM SGT> <Error> <WebLogicServer> <BEA-000383> <A critical s
    ervice failed. The server will shut itself down>
    <Mar 5, 2010 3:33:34 PM SGT> <Notice> <WebLogicServer> <BEA-000365> <Server stat
    e changed to FORCE_SHUTTING_DOWN>
    Stopping PointBase server...
    PointBase server stopped.
    from the WLS AdminServer.log:
    ####<Mar 5, 2010 3:33:05 PM SGT> <Info> <Socket> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774385687> <BEA-000436> <Allocating 3 reader threads.>
    ####<Mar 5, 2010 3:33:05 PM SGT> <Info> <Socket> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774385687> <BEA-000446> <Native IO Enabled.>
    ####<Mar 5, 2010 3:33:06 PM SGT> <Info> <IIOP> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774386531> <BEA-002014> <IIOP subsystem enabled.>
    ####<Mar 5, 2010 3:33:11 PM SGT> <Info> <Security> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774391656> <BEA-000000> <Starting OpenJPA 1.0.0.1>
    ####<Mar 5, 2010 3:33:17 PM SGT> <Info> <Security> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774397171> <BEA-090516> <The Authenticator provider has preexisting LDAP data.>
    ####<Mar 5, 2010 3:33:33 PM SGT> <Info> <Security> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774413421> <BEA-090516> <The CredentialMapper provider has preexisting LDAP data.>
    ####<Mar 5, 2010 3:33:33 PM SGT> <Info> <Security> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774413500> <BEA-090663> <The DeployableRoleMapper "com.bea.security.providers.authorization.asi.RoleProviderStub" implements the deprecated DeployableRoleProvider interface.>
    ####<Mar 5, 2010 3:33:33 PM SGT> <Info> <Security> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774413531> <BEA-090662> <The DeployableAuthorizer "com.bea.security.providers.authorization.asi.AuthorizationProviderStub" implements the deprecated DeployableAuthorizationProvider interface.>
    ####<Mar 5, 2010 3:33:33 PM SGT> <Info> <Security> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774413796> <BEA-090093> <No pre-WLS 8.1 Keystore providers are configured for server AdminServer for security realm wls.>
    ####<Mar 5, 2010 3:33:33 PM SGT> <Notice> <Security> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774413796> <BEA-090082> <Security initializing using security realm wls.>
    ####<Mar 5, 2010 3:33:34 PM SGT> <Critical> <Security> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774414234> <BEA-090404> <User weblogic is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.>
    ####<Mar 5, 2010 3:33:34 PM SGT> <Critical> <WebLogicServer> <SGBLM010> <AdminServer> <main> <<WLS Kernel>> <> <> <1267774414234> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: User weblogic is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.
    weblogic.security.SecurityInitializationException: User weblogic is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(Unknown Source)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(Unknown Source)
         at weblogic.security.service.SecurityServiceManager.initialize(Unknown Source)
         at weblogic.security.SecurityService.start(SecurityService.java:141)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
    >
    ####<Mar 5, 2010 3:33:34 PM SGT> <Notice> <WebLogicServer> <SGBLM010> <AdminServer> <main> <<WLS Kernel>> <> <> <1267774414328> <BEA-000365> <Server state changed to FAILED>
    ####<Mar 5, 2010 3:33:34 PM SGT> <Error> <WebLogicServer> <SGBLM010> <AdminServer> <main> <<WLS Kernel>> <> <> <1267774414328> <BEA-000383> <A critical service failed. The server will shut itself down>
    ####<Mar 5, 2010 3:33:34 PM SGT> <Notice> <WebLogicServer> <SGBLM010> <AdminServer> <main> <<WLS Kernel>> <> <> <1267774414328> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
    ####<Mar 5, 2010 3:33:34 PM SGT> <Info> <WebLogicServer> <SGBLM010> <AdminServer> <main> <<WLS Kernel>> <> <> <1267774414359> <BEA-000236> <Stopping execute threads.>
    also, i just noticed that when staring OES admin server i get the following from the logs:
    system_console.log:
    2010-03-05 15:19:04,218 [JettySSLListener1-1] ERROR com.wles.soap.BLM.BlmBindingImpl - getUndistributedAttributeChanges has not been implemented properly.
    2010-03-05 15:27:17,656 [Thread-31] WARN com.bea.security.ssl.axis.AxisClientSocketFactory - Error during SSL handshake; host: SGBLM010, port: 8,000.
    2010-03-05 15:27:17,687 [Thread-31] ERROR com.bea.security.pdws.Distributor - unable to bind unbound arme
    Communication Error:; nested exception is:
         javax.net.ssl.SSLHandshakeException: Error during SSL handshake; host: SGBLM010, port: 8,000.
    2010-03-05 15:27:17,687 [Thread-31] ERROR com.bea.security.pdws.ARMEGroup - arme group '//bind/wls' error report, policyno = 52:
    2010-03-05 15:27:17,687 [Thread-31] ERROR com.bea.security.pdws.ARMEGroup - arme 'asi.null.ARME.wls_ssm.asi.SGBLM010':
    2010-03-05 15:27:33,015 [Thread-32] WARN com.bea.security.ssl.axis.AxisClientSocketFactory - Error during SSL handshake; host: SGBLM010, port: 8,000.
    2010-03-05 15:27:33,015 [Thread-32] ERROR com.bea.security.pdws.Distributor - unable to bind unbound arme
    Communication Error:; nested exception is:
         javax.net.ssl.SSLHandshakeException: Error during SSL handshake; host: SGBLM010, port: 8,000.
    WLESWebLogic.wrapper.log:
    INFO | jvm 1 | 2010/03/05 15:27:17 | Processing AxisFault, cause: javax.net.ssl.SSLHandshakeException: Error during SSL handshake; host: SGBLM010, port: 8,000.
    INFO | jvm 1 | 2010/03/05 15:27:17 | Re-throwing the fault...
    INFO | jvm 1 | 2010/03/05 15:27:18 | error.jsp: Client has closed the connection, error not reported to client.
    INFO | jvm 1 | 2010/03/05 15:27:18 | error.jsp: The exception is: com.bea.wles.management.console.utils.NestedJspException: Connection reset by peer: socket write error
    INFO | jvm 1 | 2010/03/05 15:27:33 | Processing AxisFault, cause: javax.net.ssl.SSLHandshakeException: Error during SSL handshake; host: SGBLM010, port: 8,000.
    INFO | jvm 1 | 2010/03/05 15:27:33 | Re-throwing the fault...
    although, it seems that the OES admin server is up since i am able to access the OES admin console.
    i have tried playing around the policies to grant the "weblogic" the priviliges for an Admin but is still get the same issue. Although, when i try to distribute the changes in the policy, "ASI ( Policy for entire Oracle Entitlements Server system ) " still appears in the list of changes.
    any thoughts on what the problem is? is there a way to force the distribution of the policy? maybe through the command prompt or other console?
    Edited by: user9056644 on Mar 5, 2010 12:02 AM

    Have you applied CP2 or CP3 to OES? There were enhancements that allows these policies to be scoped within an organization. I only ask to help guide you on distributing policies for the runtime WLS domain. The ASI domain is only for the admin. There should have been a set of resources and policies created as a result of running ConfigTool for your new instance (looks like you named it 'wls'). If no CP, it will be in DefaultApp next to ASI.
    You have to distribute policies for 'wls' immediately following running ConfigTool before starting WebLogic or you will put it into a state where it can't be started. The corrective action is to remove the state.ck file under C:\BEA_HOME_10/ales32-ssm/wls-ssm/instance/wls_ssm/work/runtime, distribute policies, restart WebLogic.
    If you need to re-run ConfigTool (after installing CP for instance), revert the following files:
    <domain>/config/config.xml
    <domain>/bin/startWebLogic.sh | .cmd
    Revert from the no-ales backups created. Remove the instance folder under C:\BEA_HOME_10\ales32-ssm/wls-ssm/instance. You can then re-run ConfigTool if you have to.

  • Error:Cannot connect to WMI provider. You do not have permission or the server is unreachable

    I'm getting the below message when i try and access SQL Config Manager on my Windows Server 2003 R2
    "Cannot connect to WMI provider. You do not have permission or the server is unreachable. Note that you can only manage SQL Server 2005 and later servers with SQL Server Configuration Manager.
    Generic failure [0x80041001]"
    Also tries with the below solution but still the error persists
    The solution is to go to a command prompt as administrator and then run mofcomp.
    C:\Program Files\Microsoft SQL Server\90\Shared>mofcomp "C:\Program Files\Microsoft SQL Server\90\Shared\sqlmgmproviderxpsp2up.mof"
    Below was the output of the command:
    Microsoft (R) 32-bit MOF Compiler Version 5.2.3790.1830
    Copyright (c) Microsoft Corp. 1997-2001. All rights reserved.
    Parsing MOF file: C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmp
    roviderxpsp2up.mof
     (1): error SYNTAX 0X8004402f: Error creating temporary file
    Compiler returned error 0x8004402f
    C:\Program Files (x86)\Microsoft SQL Server\100\Shared>
    Can anyone tell how this problem can be solved?

    Sorry for the mistake.The command prompt is
    C:\Program Files (x86)\Microsoft SQL Server\100\Shared>mofcomp "C:\Program Files  (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof"
    And error i got is
    Microsoft (R) 32-bit MOF Compiler Version 5.2.3790.1830
    Copyright (c) Microsoft Corp. 1997-2001. All rights reserved.
    Parsing MOF file: C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmp
    roviderxpsp2up.mof
     (1): error SYNTAX 0X8004402f: Error creating temporary file
    Compiler returned error 0x8004402f
    C:\Program Files (x86)\Microsoft SQL Server\100\Shared>
    I hav checked that sqlmgmproviderxpsp2up.mof is in C:\Program Files  (x86)\Microsoft SQL Server\100\Shared\ folder.

  • After creation of PO system should not allow to change the price in PO

    Hi There,
    In my scenario once PO is created then after send to vendor PO print document,Users are changing the price in PO.so system should not allow to change the price in PO once PO got saved.
    So please advice.

    Hi,
    you could set in customizing for field selection keys the net price      
    to display for ME22N so that changes can not be made         
    (transaction OLME -> purchase order -> Define Screen Layout at Document Level).
    Please check that you have set all the relevant field selection      
    groups to display: AKTV, ME22, ME22N... (read and apply note 30316)                                                                               
    Other workaround is try to do by yourself with the badi                      
    ME_PROCESS_PO_CUST and send your own error message.    
    Regards,
    Edit

  • Cannot start weblogic 8.1 User is not permitted to boot the server

    Hi,
    Sorry to cross-post, but I didn't seem to get any feedback on this in the 'security' newsgroup.
    I have installed Weblogic 8.1SP3 on two identical workstations as well as deployed our application. On one server WL8.1 starts up fine. On another, it says "BEA-090404 user weblogic 8.1 is not permitted to boot the server".
    The OS'es are identical: Windows XP Pro SP2.
    The only difference I can think of: one is logged into a windows-domain, the other directly onto the PC.
    I've ran diffs-ignoring-whitespace (i.e. diff -w) on the important-looking files (.ldift and config.xml) and don't see any differences that would warrant such difference.
    Any suggestions?
    thanks,
    bill

    when you installed the WLS , which admin user did you >create ?Admin user 'weblogic'. Actually someon did this long ago and checked in the generated config files (boot.properties) into our source tree?
    So, in which mode do you start the WLS ? development or >production ?This I don't know.
    Our setup is as follows:
    1) We install weblogic (server only)
    2) Run our ant scripts
    3) Ant populates and deploys the config files and pe.ear file to a new domain.
    4) we start weblogic from a script in that domain: startWeblogic.cmd
    <Jul 20, 2007 8:17:35 AM CDT> <Info> <Configuration Management> <BEA-150016> <This server is being started as the administration server.>
    <Jul 20, 2007 8:17:35 AM CDT> <Info> <Management>
    We use a few app servers and use a similar paradigm: install, deploy from build tree, start from script.
    My question: where do you specify that 'user weblogic is member of the administrator group' ?

  • How to resolve "The server is unavailable and could not be accessed. The server is probably disconnected from the network." error in Sharepoint serach crawl.

    Hi all,
    I have created a content source in Search service application for a particular site collection "http://spwebapp/sites".
    I performed reset crawl index of Search service application and then performed a full crawl.
    But i get errors on running crawl on this content source for most of the files. The error is "The server is unavailable and could not be accessed. The server is probably disconnected from the network." Though the site is accessible.
    But before performing reset index the crawl was working fine on this content source. Crawl is working fine for other site collections. Only one site collection is facing this problem. Please let me know if what I can do to resolve this error.
    Thanks in advance.

    Are you seeing any error messages in the URL related to the Gatherer?  And in your content source, are there any site URLs that are no longer active or do you have any crawl rules set up that might be affecting access to the site collection?
    I've seen this happen for a variety of reason, SSL issues, proxy issues, permissions issues.  The Eventvwr and ULS logs should help you narrow down the real problem.
    Sometimes this is an issue because the indexer and the site are sitting on the same box, you could try doing a disable loopback check to see if that resolves the issue and if it does then go through the hassle of setting up a specific LSA :
    http://iedaddy.com/2009/04/sharepointdisable-loopback-check/
    ieDaddy
    Blog: http://iedaddy.com
    Twit: @iedaddy

  • Microsoft Access will not Sync to SharePoint - Publish Failed: The Object Could not be Committed to the Server

    I created a very simple Microsoft Access database with one table and one form. When I published it to SharePoint, everythng worked fine. It published succesfully and there were no errors. I continued to make enhancements to the database and when I attempted
    to sync to SharePoint, I got a message that the operation failed. I clicked OK and the issues table noted the following:
    Move to SharePoint Site Issues
    Issue
    Reason
    Object Type
    Object Name
    Field Name
    The object could not be committed to the server.
    Table
    Vendor Location Information
    The object could not be committed to the server.
    Form
    Add a New Vendor
    The object could not be committed to the server.
    Navigation Pane
    Navigation Pane
    The object could not be committed to the server.
    VBA Properties
    VBA References
    The object could not be committed to the server.
    Database Properties
    DBProps
    An error occurred while recording the local application status. Please re-synchronize with the Web application. No current record.
    <tfoot></tfoot>
    I thought this was weird so I downloaded the Assets database from Microsoft to determine if it was my database or something else. After it was downloaded and saved to my computer, I attempted to publish it to SharePoint and I got the same error.
    What is weird, though, is that if I use the assets web database template in SharePoint (the one that is preloaded), it works fine. Once I open that database it in Access though and click sync, I get the same error message.
    Does anyone know why this is happening?

    I tried it again this morning creating a completely new table / form and this is the error I get:
    Move to SharePoint Site Issues
    Issue
    Reason
    Object Type
    Object Name
    Field Name
    The object could not be committed to the server.
    Table
    VLI
    The object could not be committed to the server.
    Form
    ANV
    The object could not be committed to the server.
    Navigation Pane
    Navigation Pane
    The object could not be committed to the server.
    VBA Properties
    VBA References
    The object could not be committed to the server.
    Database Properties
    DBProps
    An error occurred while recording the local application status. Please re-synchronize with the Web application. No current record.
    <tfoot></tfoot>

  • CO-PA document is not created while doing the sale order cycle

    Dear Experts,
    I have 4 company codes in my controlling area. I did all CO-PA configuration. But CO-PA Document is generated in Only one company code. Remaining company codes CO-PA document is not created while doing the sale order cycle
    I’ve carried a standard sales cycle that contains sales order (VA01),
    and (VF04,VF02). System should generate 4
    documents as follows
    1) FI Document
    2) CO Document
    3) Profit Center Accounting Document
    4) COPA Document
    But in my case for 3 company codes only 3 documents are generated instead of CO-PA. But for one company code 4 documents are generated.
    In my case i did all settings Operation concern level and assign to controlling area. I can,t Understood why system is generating CO-PA document for Only one company
    Please suggest me where i miss the settings..
    Regards,
    Krishna.V

    Dear Ajay,
    Cost element category is 01. Because hear is one another company they have FI only all transactions they maintain through FI only. so hear we maintain Cost elements category 01.
    I think it is not a problem. because hear i got CO-PA document from one company. Remaining 3 company is not generated.
    Hear we maintained all gl's chart of acc level and cost elements also.
    Please suggest me...
    Regards,
    Krishna. v

  • What's wrong with this MySQL connection? "Could not create connection to database server"

    I'm able to connect to other MySQL databases but this one particular remote MySQL connection isn't working and I cannot figure it out.  It probably has something to do with the remote server, not CF, but I thought I'd post it here if anyone had an idea.  The MySQL account has full priviledges.
    Here is the message when I try to validate the data source:
    Connection verification failed for data source: test
    com.mysql.jdbc.exceptions.jdbc4.MySQLNonTransientConnectionException:  Could not create connection to database server. Attempted reconnect 3  times. Giving up.
    The root cause was that:  com.mysql.jdbc.exceptions.jdbc4.MySQLNonTransientConnectionException:  Could not create connection to database server. Attempted reconnect 3  times. Giving up.

    This happened on two servers.  One one, the cause was that skip-networking was turned on.  In the other situation, it appears that the database name was case sensitive, so TEST was not the same as test.  Even though I edited the data source in the CF administrator, it still didn't work (very misleading).  When a coworker entered a new data source with the same information (uppercase database name this time from the start), it worked.
    Has anyone else seen this problem with the case sensitive database names?  And with the data source in CF not updating the case correctly?  Seems like a bug in CF.

  • Admin Server satrtup failing with the error User weblogic is not permitted to boot the server

    Hi ,
    The admin server is not coming up , its failing with the below error.
    <May 25, 2014 10:28:35 PM PDT> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: User weblogic is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.
    weblogic.security.SecurityInitializationException: User weblogic is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.
            at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:1010)
            at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1054)
            at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
            at weblogic.security.SecurityService.start(SecurityService.java:141)
            at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
            Truncated. see log file for complete stacktrace.
    I have tried resetting the password as per below link , it hasn't helped. Still facing issue. Please help
    http://www.weblogic-tips.com/wls-security/
    Thanks,
    Pradeep

    Creating New user did not help . Still same error.
    <May 26, 2014 8:56:31 PM PDT> <Critical> <Security> <BEA-090404> <User weblogicNew is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.>
    <May 26, 2014 8:56:31 PM PDT> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: User weblogicNew is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.
    weblogic.security.SecurityInitializationException: User weblogicNew is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.
            at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:1010)
            at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1054)
            at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
            at weblogic.security.SecurityService.start(SecurityService.java:141)
            at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
            Truncated. see log file for complete stacktrace
    >
    <May 26, 2014 8:56:31 PM PDT> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>"

  • LS Getting the error "The data could not be saved because the server could not be contacted" when deploying on my local desktop

    Hi:
    I have a very simple test LS App:
    1 Table "Person" with 1 property "Name"
    One totally standard Editable Grid
    So no complicated calculations that could timed out...
    When I hit F5 the screen launches and shows the data, but when I try to create a new Person it waits for about 2 minutes and then the following error appears:
    The data could not be saved because the server could not be contacted. Please check your network connection and try saving again. The Operation timed out.
    Despite the error the data gets persisted on the database.
    I am on VS 2013 Pro Update 4 and SQL Server LocalDB 2012 (v11.0).

    If you decide to try again I would:
    1) Uninstall Visual Studio
    2) Uninstall SQL Server (all versions)
    3) Re-install SQL Server
    4) Re-Install Visual Studio
    Unleash the Power - Get the LightSwitch 2013 HTML Client / SharePoint 2013 book
    http://LightSwitchHelpWebsite.com

Maybe you are looking for

  • 1st Gen iPod Touch v. Current Gen Model

    So, I'm debating about buying an iPod touch to help with time & task management (I'm a bit disorganized), and noticed that Apple has some refurbished models of the 1st generation iTouch for sale at a decent discount. I'm wondering what the difference

  • Am I able to use my Blackberry as a Internet sourse for my iPad

    Does anyone know if I can use my Sprint BlackBerry and a internet sourse with my iPad

  • ESS WD Java travel logger

    Hi All, I have the following question; when i look at the WD Java code of esstratre i see that SAP made a java Class named LOGGER. I would like to know where i can find all the written txt writeen by the  LOGGER class and i hope somebody can tell wha

  • Iphone4 will not play any videos from safari or youtube.

    There are several comments on here saying to turn 'plug ins' on, but there is no setting for this under the safari option in setting.  Am I missing something obvious?

  • Iphone4s battery keeps draining....

    ....i have not changed any of my settings and it started doing this after the ios6.1 update....PLEASE HELP!!  It will drain the battery just sitting there.  I don't have my email on push, wifi is not on, and I have limited what I have location servic