System is not exploding correct component.
Dear Sir
I have a material X.The BOM of this material contain component P.I created a change no. with release key.During creation i didn't specify the release key.I changed component of X's BOM to Q.When i create i production order for X the system explodes P instead of Q.What is the reason for that.
With Regards
Debasish
ON what date you have changed the BOM with Change no.? Changes will applicable from on that day onwards,
is the production order start date is After the change date?
IF not , change the order start Date to current date or future date and Re read master data again and check the result.
Similar Messages
-
System is not exploding right component during order creation.
Dear Sir
I have a material X.The BOM of this material was created with a component P on 02.11.10.Then i changed the BOM on 02.12.10 with a change number whose validity from date is 22.11.10.I change the component from P to Q.When i try to create production order for X the system explodes P instead of Q.What is the reason for that.I think system should explode Q.
With Regards
DebasishDebasish,
Please check whether your change number is released? Also check whether the order start date falls before 22.11.2010, you can also verify the BOM explosion date in the order header "Master Data" tab.
Regards,
Prasobh. -
System Update not working correctly
Hi forum,
System Update (Version 4.00.0024) is not working correctly on my T500 with Windows 7.
1: Not detecting old versions
SU is not detecting, that there is an old version of Access Connection (5.42) installed although there is a new version 5.50 avaliable. I had to do a manual update.
2: Not installing a suggested update
Each time I run SU, I get a suggested update for "Fix for Issue of HDD with HDP Detection for Windows Vista/7". After downloading there comes a meaningless message "package was not installed" (Paket wurde nicht installiert). No hint for any error.
3: Some drivers (e.g. for the ultranav) have not been downloaded at all - I had to test the functions of some hardware components and download the appropriate drivers manually in case of malfuncion.
Probably there is a solution known within the forum community, at least this should be a message to lenovo (I received no response from the help desk when reporting this finding).
Regards
AH_DEDear Herik,
thanks for your answer.
I checked the log file and found thousands of entries. Here are the lines related to "Fix for ...".
Info 2010-02-03 , 08:40:37
bei Tvsu.Gui.CustomComponents.UpdatePanel.SynchronizeBoxPackage(Object sender, EventArgs args)
Message: Selected to install: Fix for Issue of HDD with HDP Detection for Windows Vista/7, with
Info 2010-02-03 , 08:40:43
bei Tvsu.Coreq.LoadCoreqsProcessor.ProcessUpdatesImplementation(Update[] ups)
Message: Candidate list:
Fix for Issue of HDD with HDP Detection for Windows Vista/7[reboot type 3]
Info 2010-02-03 , 08:40:57
bei Tvsu.GenericPackageInstaller.GenericPackageInstaller.ExtractFiles(String extractCommand)
Message: osfq03ww.exe -s -ex -fC:\SWTOOLS\OSFIXES Extract command was executed sucessfully in Fix for Issue of HDD with HDP Detection for Windows Vista/7 update
Info 2010-02-03 , 08:40:57
bei Tvsu.GenericPackageInstaller.CmdInstaller.InstallUpdate()
Message: Update Fix for Issue of HDD with HDP Detection for Windows Vista/7 is being install using Windows Service
Info 2010-02-03 , 08:40:57
bei Tvsu.Engine.Process.PackageInstallerProcess.InstallNewUpdates()
Message: Update Fix for Issue of HDD with HDP Detection for Windows Vista/7 installation failed
ADDITIONAL ENTRIES
Info 2010-02-03 , 08:40:57
bei Tvsu.Gui.FlowScreens.Results.AdjustComponent()
Message: System updated:
Installed=0
Not Installed=Tvsu.Beans.Update[]
Deferred=0
Download Failed=0
Hidden=0
Severe 2010-02-03 , 08:41:17
bei Tvsu.Sdk.SuSdk.ShutDownApplication()
Message: Has happened an exception while the UNCAuthenticator.Shutdown() was executedShare name can not be null or empty
Since I'm a normal user only, I can't interprete this information. Do you know what to do?
Kind Regards
AH_DE -
System Information Not Working Correctly
I have a MacBook Pro Retina 15" (Mid-2014) running OS X 10.10 (Yosemite). When accessing the System Information utility, details about the hardware does not show up correctly or not at all. This only happens when accessing System Information using the following 2 methods:
Holding the "option" key, clicking on Apple, and selecting "System Information. . ." or
Accessing the "System Information" application from Launchpad.
When "System Information" is access by selecting "System Report" from "About This Mac", details about the hardware are presented correctly.
Here are 2 images showing that the details show up incorrectly or not at all:
Now, here are the good examples:
Does anyone know why this is happening how to fix it? The information should be the same, regardless of the way I access the "System Information" utility, right?Have a look at
Re: System Information is blank?
From RáNdÓm GéÉzÁ: bug related to System Preferences/Scroll bars always on.
Work around: set Scroll bars on Automatic mode. -
Active Directory System Discovery not discover 'correctly'
Hi,
I am having a very strange problem with some devices in my environment.
The operating system of these is discovered as 'Windows 7 Entreprise 6.1' which causes a lot of my queries to fail.
Normal from my point of view would be 'Microsoft Windows NT Workstation 6.1' (which is correct at 90% of devices in the same OU)
Where is the difference to others?
I already deleted those devices fully from SCCM and I checked the AD for 'Operating System' attribute (which is the same for both types of devices.i checked my console and i see all the entries for operating system are start with ' Microsoft windows NT'.the value that you are referring in the screen is custom attribute called 'operatingSystem' and that value cannot be seen in the console .and it
is not added to the discovery method by default. May be you can try deleting the computer object from SCCM and let the discovery happens again.
Eswar Koneti | Configmgr Blog: www.eskonr.com | Linkedin: Eswar Koneti
| Twitter: eskonr -
System Events not working correctly with Acrobat Professional
Hey Guys, I have a script that I have written that automatically enables security settings on a PDF through Acrobat Professional. Because of Acrobats poor scriptability I am forced into doing much though System Events.
This is not a major problem... however when activating some settings in the security settings, often warning Alert dialog boxes appear when you tell System Events to enable particular settings. These Alerts do not have a title... The only way I have been able to get the script to deal with them is with the following code:
if title of front window is "" then
tell front window
click button "OK"
end tell
end if
I guess this is an ok solution... bit hard to identify windows when they don't have titles...
BUT this is not my main problem. The main problem is that the script gets to one of these alert dialog boxes and just sits there... It sits there for like 10 seconds and then it performs the "click button "OK"" command.
This is a problem as there are like 3 of these instances and it really adds up. Can anybody help me... I am using Acrobat Professional 8.2.0 and the entire code is:
tell application "System Events"
try
tell process "Acrobat"
-- Enable security settings
click menu item "Properties..." of menu "File" of menu bar item "File" of menu bar 1
tell window "Document Properties"
tell tab group 1
click radio button "Security"
tell group "Document Security"
click pop up button 1
click menu item 2 of menu 1 of pop up button 1
end tell
end tell
end tell
tell window "Password Security - Settings"
click pop up button 1
click menu item 4 of menu 1 of pop up button 1
tell group "Permissions"
click checkbox "Restrict editing and printing of the document. A password will be required in order to change these permission settings."
click text field 1
keystroke pdfPassword
click pop up button 1
click menu item 2 of menu 1 of pop up button 1
click pop up button 2
click menu item 4 of menu 1 of pop up button 2
end tell
click button "OK"
end tell
if title of front window is "" then
tell front window
click checkbox 1
click button "OK"
end tell
end if
tell window "Adobe Acrobat - Confirm Permissions Password"
click text field 1
keystroke pdfPassword
click button "OK"
end tell
if title of front window is "" then
tell front window
click checkbox 1
click button "OK"
end tell
end if
tell window "Document Properties"
click button "OK"
end tell
end tell
on error
display alert "System Events was unable to Enable Commenting. This may be because Acrobat has modified its menu system. Please contact your system administrator."
end try
end tell
A delay does not work... its like as soon as I click the "OK" button it stalls for 10 seconds or does not know that is meant to continue... because I did this:
tell window "Password Security - Settings"
click button "OK"
end tell
beep
In this situation it still takes like 10 seconds for the beep to occur after the click button "OK" command.Hey Guys, I have a script that I have written that automatically enables security settings on a PDF through Acrobat Professional. Because of Acrobats poor scriptability I am forced into doing much though System Events.
This is not a major problem... however when activating some settings in the security settings, often warning Alert dialog boxes appear when you tell System Events to enable particular settings. These Alerts do not have a title... The only way I have been able to get the script to deal with them is with the following code:
if title of front window is "" then
tell front window
click button "OK"
end tell
end if
I guess this is an ok solution... bit hard to identify windows when they don't have titles...
BUT this is not my main problem. The main problem is that the script gets to one of these alert dialog boxes and just sits there... It sits there for like 10 seconds and then it performs the "click button "OK"" command.
This is a problem as there are like 3 of these instances and it really adds up. Can anybody help me... I am using Acrobat Professional 8.2.0 and the entire code is:
tell application "System Events"
try
tell process "Acrobat"
-- Enable security settings
click menu item "Properties..." of menu "File" of menu bar item "File" of menu bar 1
tell window "Document Properties"
tell tab group 1
click radio button "Security"
tell group "Document Security"
click pop up button 1
click menu item 2 of menu 1 of pop up button 1
end tell
end tell
end tell
tell window "Password Security - Settings"
click pop up button 1
click menu item 4 of menu 1 of pop up button 1
tell group "Permissions"
click checkbox "Restrict editing and printing of the document. A password will be required in order to change these permission settings."
click text field 1
keystroke pdfPassword
click pop up button 1
click menu item 2 of menu 1 of pop up button 1
click pop up button 2
click menu item 4 of menu 1 of pop up button 2
end tell
click button "OK"
end tell
if title of front window is "" then
tell front window
click checkbox 1
click button "OK"
end tell
end if
tell window "Adobe Acrobat - Confirm Permissions Password"
click text field 1
keystroke pdfPassword
click button "OK"
end tell
if title of front window is "" then
tell front window
click checkbox 1
click button "OK"
end tell
end if
tell window "Document Properties"
click button "OK"
end tell
end tell
on error
display alert "System Events was unable to Enable Commenting. This may be because Acrobat has modified its menu system. Please contact your system administrator."
end try
end tell
A delay does not work... its like as soon as I click the "OK" button it stalls for 10 seconds or does not know that is meant to continue... because I did this:
tell window "Password Security - Settings"
click button "OK"
end tell
beep
In this situation it still takes like 10 seconds for the beep to occur after the click button "OK" command. -
System variables not showing correctly in body pages
Can anyone help with a problem I'm having with system variables please?
I have created a template and multiple documents which all use a system variable for placing the chapter number and page number in the footer: <$chapnum>-<$curpagenum>
I have just created a new document and want to use the same variable on the main pages of the document but I want to use a different page number variable on the TOC. For some reason now, when I create a new variable of <$curpagenum> it doesn't show correctly on the document; it's showing as: <$curpagenum
I've also tried using the format of <$chapnum>-<$curpagenum> that has worked on other documents but now this shows in the document footer as: <$chapnum<$curpagenum
Has anyone seen this problem before?
ThanksHi Art, thanks for the reply.
In my original documents I'd edited the Current Page system variable from <$curpagenum> to <$chapnum>-<$curpagenum>. This worked correctly.
In the new document I tried both the picking-and-clicking method and typing the string to get the same footer but neither worked.
I've now changed it as you suggested, selecting the two seperate system variables of <$chapnum> and then <$curpagenum> and this seems to have solved the problem.
I'll know to keep things simple in future!
Thanks. -
System will not reinstall correctly
I have a Toshiba Satellite P70-A. Since day one it has always had updating crashes and problems. I have tried to reinstall from scratch several times and it still crashes during installation and giving errors. This is even after wiping the drive and reinstalling the factory image. The factory image I have may be bad. What do I do?
RobThis is even after wiping the drive and reinstalling the factory image. The factory image I have may be bad.
The probability of the factory image being bad and still being able to restore it is close to zero.
I think you can safely conclude that the software on the hard drive is not to blame.
-Jerry -
Icon in system prefs not displaying correctly
In the system prefs pane, the speech icon is being dispayed as a box with a light switch and the text cut off. Any ideas on how to get this back to the original microphone. Thanks.
chris,
Welcome to Apple Discussions.
According to MarkDouma®:
Quit System Preferences if it's running and trash the following file:
/Users/~/Library/Caches/com.apple.preferencepanes.cache
Then launch System Preferences and hopefully the icons should appear properly.
;~) -
System does not boot during Hyper V installation
Hi -
I was trying to install Hyper V on my Windows 8.1 professional edition, 64 bit OS. The installation was through ISO downloaded through MSDN. During installation I had to hard boot my system through switch off. Now my system does not boot correctly and during
boot it flashes a message "The last windows installation did not complete please install the setup". Does this mean that my existing 8.1 OS has crashed ? how can i come out of this and recover my data ?
My hardware configuration is :
i7 processor, 16GB RAM, intel graphics Card, windows 8.1 professional 64 bit OS.Hi RahuIM,
You can try to enter safe mode then copy your personal data to the data volume then reinstall the system.
The related KB:
Start your computer in safe mode
http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7
Step-By-Step: Enabling Hyper-V for use on Windows 8.1
http://blogs.technet.com/b/canitpro/archive/2014/03/11/step-by-step-enabling-hyper-v-for-use-on-windows-8-1.aspx
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
JSP page not rendering correctly for remote system
I have a jsp page that has an HtmlGraphicImage component that gets set by a method in a java bean using
image2.setUrl( imageFilename );
When I run the application on my local system (my development system running Studio Creator) the page comes up on my web browser with the proper image.
However, when I try to access the page from a remote PC, the page comes up okay with all the static components, but the image is blank. When I look at the page source on that browser, the image url is set to blank (i.e. nothing inside quotes).
Any ideas why this image is rendered correctly on my local system and not remotely?<title>Home</home>Find the mistake!
-
I have the same problem as many other users: updated iTunes on Windows 7 on Jan 26, 2014 and iTunes does not open. First message "unable to locate component- MSVCR80.dll was not found" then "iTunes was not installed correctly. Please reinstall iTunes - Error 7 (Windows error 126)". When will Apple fix this? Don’t feel like uninstalling all Apple software and then re-installing it as suggested, as I am on a terribly slow internet connection while travelling in the DR Congo.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall press on)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
PPOMA_CRM - System does not find the correct Organizational Unit
Dear Experts,
we have done the following:
1. We created a new Z-Field within table CRMD_ORDERADM_H with the Application Enhancement Tool. The name of the field is: ZZFLD000000.
2. The we changed the View-Cluster T77OMATTR and added the attribute ZZFLD00000 (Name Postal Code).
3. We added the attribute to the View in Component BT126H_APPT.
4. In PPOMA_CRM we added the Z-Attribute to the Organizational Unit 'A' with a number range from '08030' to '08035'.
5. Then we changed created a new Org. Determination Rule and assigned the new Determination Rule to a new Org. Data Profile which we assigned to the transaction type. We made a try and the determiantion rule is working!
The point is, when we create an activity the user puts the postal code (in this example '08032') into the created Z-Field and then we expect that the specific organizational unit 'A' will be assigned like Service Organization.
To solve the problem we put a breakpoint to all SET and GET Methods of the Attribute but the system is not stopping there. We missed something but we can not find really the problem.
Which method we have to redefine so that SAP CRM is looking at the new created Z-Field and is searching within the Organizational Structure for the correct Organizational Unit?
Best Regards
OliverHi,
This is my idea, I don't check this.
But, I think it's have to work.
Pass guid to CRM_ORDER_READ, and get parameters.
After that, check where you can read postal code.
I think it's in lT_CUSTOMER_H
For example,
call function 'CRM_ORDER_READ'
EXPORTING
it_header_guid = ZGUID
IMPORTING
ZCUSTOMER_H = lT_CUSTOMER_H
EXCEPTIONS
DOCUMENT_NOT_FOUND = 1
ERROR_OCCURRED = 2
DOCUMENT_LOCKED = 3
NO_CHANGE_AUTHORITY = 4
NO_DISPLAY_AUTHORITY = 5
NO_CHANGE_ALLOWED = 6. -
Hi!
So i think i closed the wrong service at some point a few weeks back (apple mobile device) but iTunes remained working after that for another week. I then updated iTunes and i get the same "Service ‘Apple Mobile Device’ (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services." every time. If i click ignore, just so i can access iTunes with out syncing my iPod (touch 2nd gen) i then get 'iTunes was not installed correctly. Please re-install iTunes. Error 7 (Windows error 193)" when it has all installed. I don't understand what the problem is anymore as I have looked at other questions on the apple website, carried out the advice and it hasn't work. Any of them.
Tings I have done:
- Wiped all iTunes and Apple data from my computer (if you search for 'iTunes' or 'Apple' nothing comes up apart from applets from system code.
- Attached iPod before iTunes install and updated drivers.
- Installed iTunes as 'Run as administrator'
- Uninstalled and re-installed the software nearly 20 times now and rebooted the computer in between everytime.
Please someone help because i really need to get music on my ipod and i enjoy the ease of use of iTunes compared to spotify or Windows Media Player.For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
Regarding AMDS failures there is a hint in another thread that disabling the Windows Firewall before attempting to reinstall may help, otherwise take a look at the steps outlined in this post. Re: Can't install iTunes 12.1 on Windows 7 64-bit. I know they look a little daunting, but the process of generating the logs themselves isn't that hard to do. Extracting useful information from them is still a challenge but maybe something will leap out. If you want to post the log for the failed components for me to have a look at here or in the other thread please edit out any personal information, particularly your email address, first.
tt2 -
Can someone please help me to get to my i Tunes library? I am getting the following message when trying to access i Tunes=i Tunes. exe-System error-can't start because MSVCR 80.dll is missing-Try reinstalling program. Also i Tunes was not installed correctly-Please reinstall i Tunes.-Error7(Windows error 126).
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates
Maybe you are looking for
-
How in Bridge to view AVCHD files using Adobe Media Player
a) AVCHD is not in the list under Edit / preferences / File association !!! b) Where is the Adobe player located ? Operating System: Windows 7
-
I updated iTunes and now my 160 GB iPod Classic makes iTunes freeze.
I have done everything from resetting the iPod to uninstalling and reinstalling iTunes. I have formatted and reformatted the iPod. The iPod actually works, I can go through and fix the settings to my liking. But when I go to sync with my iTunes, i
-
Process code or Fmodule for Idoc type PREQCR101 and message type PREQCR1
hi all, Iam unable to find the process code or function module for the idoc type PREQCR101 and message type PREQCR1 for inbound process. help from some one would be a lot appretiated.
-
I'm using the professional version 8. I have a form I'm filling in the blanks and at the bottom of the page I need to insert a photo. I know how to attach the photo but you have to click the paper clip and then the photo for it to open. Is there a wa
-
Open photos always in Photoshop
How do I make sure that my photos open always in Photoshop format rather than in Preview?