System is not firming schedule line automatically

Hello,
I want to know how the end and start date of planning time fence is calculated and why system is not firming schedule line automatically.
In Material master I am using MRP type P1 and GR processing time 1 day, planned delivery time 1 day, planning time fence is 7 days. Lot size key EX
Today is 19.11.2008. And I have requirement of this material coming from FG on 20.11.2008.In MD04 transaction system is showing End of planning time fence is 28.11.2008 which is fine as per material master (+ 7 days excluding sat & Sunday).
When I run MRP for FG, system generates schedule line for this material procured form vendor for the required qty on 28.11.2008 with exception message (30-Plan process according to schedule20.11.08).
As per firming type P1 system should automatically firm the order since requirement date is on 20.11.2008 and it should show the schedule line on 20.11.2008 not on 28.11.2008
But when I change the delivery date manually from 28.11.2008 to 20.11.2008 it firms the schedule line.
Please suggest what can be the solution
Regards
Nanhe Babu

Dear,
Check your MRP type and Planning time fence defined in mrp 1 view of material master?
Firm zone (go-ahead for production)
One of two periods specifying the degree to which the delivery schedule lines of a scheduling agreement release are classified as firm or semi-firm.
Use
! Firm zone I Trade-off zone I
!--!-II> Days
SA release creation date Schedule line date
Firm zone: (go-ahead for production)
If the date of a schedule line lies within the firm zone, the vendor has the go-ahead to produce the relevant quantity with the assurance that the orderer will bear any and all material and production costs associated with the scheduled quantity in the event of subsequent cancellation by the latter.
1. Another way of handling your issue is by using the manual firming .
2. In mdo4 in the Edit menu u will find a Set firming date.
3. Now you can select this and this will give u a popup for entering a date.
4.When u give a date in this and hit enter.
Also please note delivery schedule lines in ME38 (even it is created automatically), in Planning time fence, will get affected by MRP run.
Hope clear to you.
Regards,
R.Brahmankar

Similar Messages

MRP in third party scenario. System not creating schedule lines

HI
I am using third party subcontracting scenario. As i am purchasing material but i am not taking material in under my company. I am paying to my vendor but the delivery is going to my subcontractor.
Here i am able to create planned order or purchase requisition. But MRP is not generating schedule lines for that vendor.
Regards,
Anand.

Hello,
Check the following settings.
1. Source list active in Material master.
2. Valididy of the source list.
3. Any quota arrangement
4. Purchase infor record.
Note: all are OK, but still PR's only created, then check for the requirement date, if the requirement date lies before the validity of the source list then also system will create only purchase requisitions.
for this calculation you have to check the lead time for procurement cycle you have to check. Based on this no. of days only system will try to create the procurement proposals.
If the lead time is very high and this is going beyond the sourcelist validity, then also PR's only created.
So there are so many possibilities. check for the above said things and revert back.
regards,
<Manick>

MD04 firm schedule line - ME38 schedule line manualy changed

Hello Gurus,
many users change manually quantity in schedule lines but then the schedule is locked and becomes firm in MD04 ( * ) so that MRP does not take this quantity into account.
How to change this behaviour as I want the MRP to take this modification into account ?
Thanks a lot.

Hi,
When your users change a schedule line they are automatically firmed as the system can only assume that they know more about the supply position than it does.
MRP does take the quantity into account, however, it is not allowed to change the date nor the quantity, so any increase or decrease in demand is reflected in the first unfirmed schedule line.
This behaviour is not configurable.
If the firmed schedule line is not correct because the user has made a change in error then you need to set the quantity to zero so that the schedule line is deleted. MRP will then create a new schedule line in line with the planning parameters and current stocks / demand.
Hope that has answered your question
Alex Dixon

MRP Type P1 and late firm schedule lines

Hello All,
     We are using MRP Type P1 which firms our schedule agreement schedule lines within the planning time fence (as desired). However, sometimes the supplier is late on delivery and the firm schedule line goes into the past.
     Is it possible to have MRP move the firm schedule line delivery date to today instead of going into the past?
     Thank you,
     Jerry

Hi ,
Bring process forward (reschedule in)
Within this rescheduling horizon, the net requirements calculation checks whether, after a requirement, a firmed receipt exists, which can be used to cover this requirement. Then the system displays a rescheduling date as well as the exception message Bring process forward for this receipt. The net requirements calculation then uses this receipt and the system will only create another procurement proposal if the receipt quantity is not sufficient to cover the complete requirement. Several firmed receipts can be used to cover one requirement.
It does not take in to account the GR processing time and it is purely based on the stock requirement date , parameters in Procurement and Scheduling in the Material Master
So it will consume the requirement backward scheduling and bring the Process forward.
Kumar which strategy are you using ? scheduling agreement is of weekly , daily or monthly bucket ?
How many days SA bring to Production and How many days SA for forecast you are doing ?
Are you using any Program to convert these SA in to PIR and upload ( using any program ) .
Regards,
Jayavimal
Edited by: jaya vimal on Jun 16, 2010 1:33 PM

Item does not match schedule line (program error)

Dear Experts,
I Transaction VA02/VA03 when i put Sales order number and try to get in to the system system through error and terminate the transaction
ERROR is "Item does not match schedule line (program error)" with Message no. V1427
when i check Table level and analyse thr Debuging i found that
Table VBAP line item 10 is missing and table VBEP line item 10 is there due to this miss match its shows above error
Question
Why and How it happen and how to fix this issue???
Best Regards
hanumant

Check Note 442831 - V1427: Item does not match schedule line (program error)
thanks
G. Lakshmipathi

Firmed Schedule lines.

Hi Gurus,
I have an Issue in Schedule lines. Delivery schedule lying with in the firm zone has firm indicator 1(Firm zone) in ME33l. The same schedule line shows in MD04 with * Symbol as firmed. In some of the cases Delivery schedules push out from the Firm Zone does not have a Firm Indicator in ME33l but it is firmed in MD04 with * symbol due to reschedule in.In which table & field I can Identify the Firmed schedule lines with * symbol in MD04.Please Help me.
Regards,
Senthil.K

Check table MDBS

How to gen Schedule line automatical.y by BAPI_SALESORDER_CREATEFROMDAT2

Dears,
   I am using BAPI_SALESORDER_CREATEFROMDAT2 to create Sales Order,
everything goes on well, but the only problem is i have to input the schedule line myself by providing the   SCHEDULE_LINES& SCHEDULE_LINESX parameter.
Just wondering...is there any way to let
BAPI_SALESORDER_CREATEFROMDAT2 create schedule line automatically,
just like what we do in frontend, after we input the order quantity in line item , the
schedule line will be generated automatically...

Hello,
You can use FM: BAPI_SALESORDER_CHANGE with update indicator I (insert)
call function 'BAPI_SALESORDER_CHANGE'
    exporting
      salesdocument    = l_vbeln
      order_header_inx = l_wa_order_header_inx
      simulation       = l_simulation
    tables
      return           = l_i_return
      order_item_in    = l_i_order_item
      order_item_inx   = l_i_order_item_inx
      partners         = l_i_partners
      schedule_lines   = l_i_schedule_lines
      schedule_linesx = l_i_schedule_linesx
      extensionin      = l_i_extensionin.
Thanks
Subhankar

Item does not match schedule line (program error) in sap

Dear Expert.
Greetings!
We are currently facing with this error (V1 427 item does not match schedule line (program error) in sap), when we open the sales order(VA02/03).
The error is occurring due inconsistency on the database tables, some Item is in table VBEP, but it is missing from table VBAP. This is what is causing the error message.
I checked various related notes - 442831 , 401463 , 389687 etc . These are quite old notes and I am in release ECC 6.0 .
Report SD_CONSISTENT_CHECK_EXT and SD_CONSISTENT_CHECK are already available.
Bapi BAPI_SD_SALES is also active.
Please let me know if anybody has any idea on the same.
regards
Praveen

Hi,
Refer the KBA: 1464620 - Error V1427: Item does not match schedule line which explains the reason and the solution for the issue.
Regards,
AKPT

Cisco 1130 ag - The system is not configured to boot automatically

I have a problem on a 1131ag Access point on recycle it stops and makes me maunually type BOOT at the ap: prompt
----------VVVVVVVVVVVVV----------------
ap: Xmodem file system is available.
flashfs[0]: 282 files, 13 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 15998976
flashfs[0]: Bytes used: 9497088
flashfs[0]: Bytes available: 6501888
flashfs[0]: flashfs fsck took 33 seconds.
Base ethernet MAC Address: 00:12:d9:2b:39:0c
Initializing ethernet port 0...
Reset ethernet port 0...
Reset done!
ethernet link up, 100 mbps, full-duplex
Ethernet port 0 initialized: link is up
The system is not configured to boot automatically. The
following command will finish loading the operating system
software:
boot
C1130 Boot Loader (C1130-BOOT-M) Version 12.3(2)JA, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Compiled Mon 08-Nov-04 12:40 by ccai
[I have to type "boot" here to load system]
ap: boot
Loading "flash:/c1130-k9w7-mx.123-7.JA4/c1130-k9w7-mx.123-7.JA4"...#############
File "flash:/c1130-k9w7-mx.123-7.JA4/c1130-k9w7-mx.123-7.JA4" uncompressed and 0
executing...
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C1130 Software (C1130-K9W7-M), Version 12.3(7)JA4, RELEASE )
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Tue 05-Sep-06 14:14 by alnguyen
Image text-base: 0x00003000, data-base: 0x00683F60
Initializing flashfs...
flashfs[1]: 282 files, 13 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 15998976
flashfs[1]: Bytes used: 9497088
flashfs[1]: Bytes available: 6501888
flashfs[1]: flashfs fsck took 4 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.
[Legal notes removed]
cisco AIR-AP1131AG-A-K9 (PowerPCElvis) processor (revision B0) with 24566K/8.
Processor board ID FOC08514JMF
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
1 FastEthernet interface
2 802.11 Radio(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:12:D9:2B:39:0C
Part Number : 73-8962-06
PCA Assembly Number : 800-24818-06
PCA Revision Number : B0
PCB Serial Number : FOC08514JMF
Top Assembly Part Number : 800-25544-01
Top Assembly Serial Number : FTX0909T049
Top Revision Number : A0
Product/Model Number : AIR-AP1131AG-A-K9
-----------^^^^^^^^^^^^------------------
I have already performed the ap: set BOOT etc commands a dozen times with the same results.
It says: The system is not configured to boot automatically.
I've been trying to get this one going for 4 months now..it was knocked out during a power outage while upgrading it.

I didn't know how to get to global configuration mode - I did manage to get there with a bit of guess work.
You use AP: Boot
Let it go through the boot process then at the AP> prompt, [enable] priviledged command set, type in password.
At AP# prompt type [config] then press enter for [terminal] at AP#[config] type NO BOOT MANUAL press [Enter] key and reboot AP.
Question...Do I have to use a WRITE command to write the configuration to CMOS?
I did just play it safe.

Items does not match schedule line

Item does not match schedule line (program error) - message V1427 getting while accessing the Sales Order via VA02/VA03.
While we see in table VBAP we can see all the line items except the Item number 10 for the order. However, in the table VBEP, we see 5 line items for the Sales Order.
It is not allowing us to enter the Sales Order. Kindly help.
Thanks in advance.
Message was edited by:
Praveen Kumar

Hello,
we've got the same problem.
Because of some changes in an SD-Userexit the problems have been generated.
In our case the SAP-notes can't help to solve the problem with VBAP/VBEP.
I wrote an report which check and delete the excessive positions of both tables.
Hope it helps.

How to delete firmed schedule line collectively.

Dear All,
Greetings...
Please give your valuable input to carry out the collective deletion of firmed schedule lines.
Thanks in advanc,
VIjay

please check this link..
[https://forums.sdn.sap.com/click.jspa?searchID=25906013&messageID=4862339]
karthick

Delivery not happening, Schedule lines

Dear Gurus,
End users created sales orders and saved, when trying to make delivery system through error
No delivery-relevant items in order 00000xxxx, order type xxxx
Message no. VL455
Diagnosis
The sales order you want to deliver, sales order 00000xxxx with order type xxxx, either contains no delivery-relevant items or its delivery-relevant items have already been delivered.
After analysis i come to know that in schedule line 'item relevant for delivery' field was unchecked, i checked it present system is allowing delivery and billing.
But Present problem is the sales orders which were created before this configuration were not able to deliver. system through same error.
how to overcome this,
thanking you
Regards,
Sudheer.U

Sudheer,
Open the sales order in VA02 and select the line item in question and click the "Check item availability" button on the bottom. this should propose new dates in the schedule line and subsequently you should be able to deliver the old items as well with the newly proposed dates. This is assuming you have updated the schedule line with the correct config.
Hope this helps,
Ravin

Reschedule does not update schedule line after upgrade

Dear All,
After upgrade to ECC6.0, the reschedule does not update EKET any more but it update ekpo as usual.I debugged it , before the function module SD_BACKORDER_**_SAVE everything is ok.
I also checked the sap note for the new field in T161V.But When I choose other option about customzing. eket are updated every time when the reschdule program run.This will lead double delivery.
Do you have any suggestion？
Edited by: Edward on Feb 23, 2010 9:03 PM

Hi,
On the initial screen of V_V2
Remove tickmark of SIMULATION, Then it will update schedule lines in sales document
Kapil

MRP does not creates Shcedule Line

I have a valid scheduling agreement LPA in place. Scheduling Agreement is approved and released status.
I have source list also maintained for same scheduling agreement with long validity and MRP indicator as 2 - Create Schedule line automatically.
I am running MRP using following parameters in MD02.
Processing key          NETCH               Net Change in Total Horizon
Create purchase req.    3                   Planned orders
Delivery schedules      3                   Schedule lines
Create MRP list         1                   MRP list
Planning mode           3                   Delete and recreate planning data
Scheduling              2                   Lead Time Scheduling and Capacity Planni
Even schedule line and other parameters maintained properly, MRP creates planned order and does not creates Schedule Line automatically. Material Master is maintained MRP Type PD, Lot Size as Replenishment to maximum stock level, Safety stock, No strategy and availability on.
What I am doing wrong? With same setting in other system it is working perfectly fine.
Any feedback appreciated.
Thanks
PP

Hi
Check whether the Agreement Open Target value .
If the target quantity was completed . so system will not create the Schedule lines for the material
2. If you mainatian the open period in the smk.
so system will create the planned order instead of schedule agreement. check

JIT schedule lines not created automatically

Hello All,
I'm not able to get the JIT schedule lines automatically for some of the scheduling agreements. I'm familiar with the SA process and schedule lines, but never came across JIT and SA release. Can anybody help me to provide possible reasons of not getting the JIT schedule lines created for SA.
Thanks,
Amit

Hi,
Check following points -
1) Scheduling agreement is released.
2) In Source list of the material, the Scheduling Agreement & the relevant line item is mentioned. In the MRP area the option '2 - Scheduling Agreement delivery schedule generated automatically.
3) If required quota arrangement is also maintained.
Regards,
Prashant

System is not firming schedule line automatically

Similar Messages

Maybe you are looking for