System is not recorded in the system list
Hi all,
I am using BI 7 system which is connected with a source system of SAP R/3 system and there is no problem in the connectivity between these sytems.
When I tried to save a user defined ztable in BI system it shows an error below and also the description the error message would be. Please go through the following the let me provide the solution.
error: System BI& is not recorded in the system list.
Explaination of the error follows:
System BI7 is not recorded in the system list
Message no: TR638
Diagnosis
The current transport route configuration does not have the system BI7 in this current system list.
The transport route configuration was probably not maintained after the system setup, or was changed incorrectly.
Procedure for system Administration
The system Administration need to change, activate and distribute the transport route configuration accordingly. All systtems in the transport domain must be in the configuration.
Help this to solve.
--regards,
Durai.S
Hi,
Check in STMS whether your transport route is configured correctly or not. As per error message there is problem in your transport route.
Thanks
Sunny
Similar Messages
-
System Fonts not showing in the font list
After I upgraded Adobe CC 2014.3.1.44, CL78964 on my Windows 8 (64-bit) computer, none of the system fonts are listed within Muse.
Understand two things, one. This used to work fine. I was able to see all of the system fonts, now only the ones on this list show up. Two, and fonts that I add via the web kit doesn't show up either.
I have uninstalled, then reinstalled. Nothing. I have also looked for the elusive fonts.db, which cannot be found on my system. Ideas?
Thanks,
AaronHi Aaron,
Thanks for the prompt response. We are wondering if you could try a few other things that will help isolate the issue. Our theory is the issue might be related to OS user permissions.
Run Adobe Muse CC as an Administrator
Locate the "Adobe Muse CC 2014" shortcut icon in Windows Explorer
Right-click the "Adobe Muse CC 2014" icon and then click "Run as administrator"
When the "User Account Control" is displayed, do one of the following:
If you are logged on as a standard user, or if the user account control is configured to always require credentials, enter the appropriate administrative credentials, and then click "OK"
If you are logged on as an administrator and user account control is not configured to always require credentials, click "Yes" to start the application
After Muse finishes launching, create a new site and inspect the font drop-down
Verify "Local Store" folder permissions
Open a Windows Explorer dialog
In the address field enter "%appdata% and open the folder named "com.adobe.AdobeMuseCC.2014.3".The folder path should be similar to the following with <username> being the current OS user's nameC:\Users\ <username> \AppData\Roaming\com.adobe.AdobeMuseCC.2014.3
Right-click on the folder "Local Store" and select "Properties"
In the "Local Store Properties" tab, select "Security"
Select the current user name from the "Group or user names" list
Observe the section "Permissions for ...." in the "Local Store Properties" dialog. Does the user have full permissions (full control, modify, read & execute, list folder contents, read, write)?
Do you know if the Windows OS user account you are using is an administrator or standard user on your machine? You can find out by navigating to the following in Windows Explorer and selecting "Manage User Accounts":
Control Panel\User Accounts\User Accounts
Please let me know if you need any clarification on what we are asking for.
Thank you for your time in advance.
Regards,
Marc -
Device Id not exists in the system list
device id is not exists in the SYSTEM
how do i add the device id to the system
previously, i have sync a few application and works fine,
yet , after i clean up merep_purge...the device id gone...
how to resolve this..Hi yzme,
Hope your problem is resolved by now.
If not just like to mention following points and i am sure it will definitely answer all your queries.
1. Device ID gets generated only at the time of first time synchronisation with the MI server.
2. You can delete the device ID by running some function module or by uninstalling MI client.
3. but if you have deleted the device ID by mistake, you have to reinstall the application and after sync it will generate a new device ID.
4. When ever you deploy any new application it will generate a new mobile ID.
do not confuse the mobile ID with device ID. mobile ID is different for different application and user on same device.
Regards
Satya -
I ran SP2 and SP2 for Language Pack successfully before.
Here is how it looks:
Product
Version
Status
Language Pack for SharePoint Foundation 2010 - Portuguese/Português (Brasil)
Installed
Microsoft SharePoint Foundation 2010 1046 Lang Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft SharePoint Foundation 2010 1046 Lang Pack Core
14.0.7015.1000
Installed
Service Pack 2 for Microsoft 2010 Server Language Pack (KB2687462) 64-Bit Edition
14.0.7015.1000
Installed
Language Pack for SharePoint, Project Server and Office Web Apps 2010 - Portuguese/Português (Brasil)
Installed
Microsoft Access Services Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Document Lifecycle Components Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Hotfix for Microsoft Office Server (KB2512800)
14.0.5138.5000
Installed
Microsoft Excel Services Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Excel Web App Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft 2010 Server Language Pack (KB2687462) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft InfoPath Form Services Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Office Server Proof (Portuguese (Brazil)) 2010
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Office Web Apps Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft 2010 Server Language Pack (KB2687462) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Office Web Apps Proof (Portuguese (Brazil)) 2010
14.0.7015.1000
Installed
Service Pack 2 for Microsoft 2010 Server Language Pack (KB2687462) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Office Web Apps Shared Coms Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft 2010 Server Language Pack (KB2687462) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft OMUI Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft 2010 Server Language Pack (KB2687462) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Project Server Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft 2010 Server Language Pack (KB2687462) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Search Server 2010 Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Hotfix for Microsoft Office Server (KB2475878)
14.0.5135.5000
Installed
Microsoft Shared Coms Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft SharePoint Foundation 2010 1046 Lang Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft SharePoint Portal Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Slide Library Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Visio Services Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Web Analytics Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Word Server Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft XMUI Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft 2010 Server Language Pack (KB2687462) 64-Bit Edition
14.0.7015.1000
Installed
PerformancePoint Services in SharePoint 1046 Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft SharePoint Foundation 2010
Installed
Microsoft SharePoint Foundation 2010
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft SharePoint Foundation 2010 1033 Lang Pack
14.0.4763.1000
Installed
Hotfix for Microsoft SharePoint Foundation 2010 (KB2512804)
14.0.5138.5000
Installed
Microsoft SharePoint Foundation 2010 Core
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft® Search Server 2010 Express
Installed
Microsoft Office Server Proof (Arabic) 2010
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Office Server Proof (English) 2010
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Office Server Proof (French) 2010
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Office Server Proof (German) 2010
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Office Server Proof (Russian) 2010
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Office Server Proof (Spanish) 2010
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Search Server 2010 Core
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Search Server 2010 English Language Pack
14.0.4763.1000
Installed
Hotfix for Microsoft Office Server (KB2475878)
14.0.5135.5000
Installed
Microsoft Search Server 2010 Express
14.0.4763.1000
Installed
Microsoft Shared Components
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Shared Coms English Language Pack
14.0.4763.1000
Installed
Microsoft SharePoint Foundation 2010 1033 Lang Pack
14.0.4763.1000
Installed
Hotfix for Microsoft SharePoint Foundation 2010 (KB2512804)
14.0.5138.5000
Installed
Microsoft SharePoint Foundation 2010 Core
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Web Analytics English Language Pack
14.0.4763.1000
Installed
Microsoft Web Analytics Web Front End Components
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
However when I try to run February CU or December CU I get the error:
The expected version of the product was not found on the system
it's possible that I messed up because
I think I installed a SharePoint Server Service Pack 2 in a SharePoint Foundation Farm.
these are the files I ran:
1 - SP2 pt-br
oserversp2010-kb2687453-fullfile-x64-pt-br
2 - SP2 for Language Pack pt-br:
oslpksp2010-kb2687462-fullfile-x64-pt-br
3 - ran configuration wizard (had na error message the first time and success in the second try)
4 - December CU or February CU:
Download SharePoint Foundation 2010 February 2014 CU
The expected version of the product was not found on the system
In the first step I think I should have installed
wsssp2010-kb2687464-fullfile-x64-pt-br
Now I try to runthis and I get:
The update is already installed on the system.
Hopefully this is a QA Environment but it would be a pain to start over.
Any suggestion?
Thanks
J.CluaHi,
Here are all errors logged:
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:10:18 PM]: Found a missing feature Id = [81606c80-44b3-47c9-8c24-136bdeb07d64]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:10:18 PM]: The feature with Id 81606c80-44b3-47c9-8c24-136bdeb07d64 is referenced in the database [WSS_Content_Sites_01], but is not installed
on the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:10:18 PM]: Found a missing feature Id = [4b6e8a49-765d-47a1-92f8-91f61d07bbed]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:10:18 PM]: The feature with Id 4b6e8a49-765d-47a1-92f8-91f61d07bbed is referenced in the database [WSS_Content_Sites_01], but is not installed
on the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:10:18 PM]: Found a missing feature Id = [af6d9aec-7c38-4dda-997f-cc1ddbb87c92]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:10:18 PM]: The feature with Id af6d9aec-7c38-4dda-997f-cc1ddbb87c92 is referenced in the database [WSS_Content_Sites_01], but is not installed
on the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:10:18 PM]: Found a missing feature Id = [00bfea71-dbd7-4f72-b8cb-da7ac0440130]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:10:18 PM]: The feature with Id 00bfea71-dbd7-4f72-b8cb-da7ac0440130 is referenced in the database [WSS_Content_Sites_01], but is not installed
on the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:16:17 PM]: Found a missing feature Id = [5daabc0d-5714-4b95-9238-95d58704bc11], Name = [Blog Rating], Description = [This feature allows visitors
to rate blog posts], Install Location = [Blog Rating]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:16:17 PM]: The feature with Id 5daabc0d-5714-4b95-9238-95d58704bc11 is referenced in the database [WSS_Content_AcademiaTI], but is not installed
on the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:23:56 PM]: Found a missing feature Id = [af6d9aec-7c38-4dda-997f-cc1ddbb87c92]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:23:56 PM]: The feature with Id af6d9aec-7c38-4dda-997f-cc1ddbb87c92 is referenced in the database [WSS_Content_GlobalIT], but is not installed
on the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [DEBUG] [3/11/2014 5:25:49 PM]: Retrieving site definition for language 1046...
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:50 PM]: Found 21 web(s) using missing web template 75801 (lcid: 1046) in ContentDatabase WSS_Content_EXP.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:50 PM]: The site definitions with Id 75801 is referenced in the database [WSS_Content_EXP], but is not installed on the current farm. The
missing site definition may cause upgrade to fail. Please install any solution which contains the site definition and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:50 PM]: Found 1 web(s) using missing web template 75802 (lcid: 1033) in ContentDatabase WSS_Content_EXP.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:50 PM]: The site definitions with Id 75802 is referenced in the database [WSS_Content_EXP], but is not installed on the current farm. The
missing site definition may cause upgrade to fail. Please install any solution which contains the site definition and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:53 PM]: Found a missing feature Id = [75a0fea7-2d1e-451a-b445-16bc346d7d8e]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:53 PM]: The feature with Id 75a0fea7-2d1e-451a-b445-16bc346d7d8e is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:53 PM]: Found a missing feature Id = [75a0fea7-5f69-4282-83ae-22808c0fbfd9]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:53 PM]: The feature with Id 75a0fea7-5f69-4282-83ae-22808c0fbfd9 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:53 PM]: Found a missing feature Id = [75a0fea7-6e3f-4d4a-8f78-245bda567b60]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: The feature with Id 75a0fea7-6e3f-4d4a-8f78-245bda567b60 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: Found a missing feature Id = [75a0fea7-040e-4abb-b94b-32f1e7572840]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: The feature with Id 75a0fea7-040e-4abb-b94b-32f1e7572840 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: Found a missing feature Id = [75a0fea7-b5a0-47d5-90e6-4b3205b02278]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: The feature with Id 75a0fea7-b5a0-47d5-90e6-4b3205b02278 is referenced in the database [[OWSTIMER] [SPContentDatabaseSequence] [ERROR]
[3/11/2014 5:25:54 PM]: Found a missing feature Id = [75a0fea7-b5a0-47d5-90e6-4b3205b02278]], but is not installed on the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature
and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: Found a missing feature Id = [f7b9c169-1418-41f3-888f-8ac436e17a0a]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: The feature with Id f7b9c169-1418-41f3-888f-8ac436e17a0a is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: Found a missing feature Id = [75a0fea7-f13a-4670-8b69-97e90d05f7c8]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: The feature with Id 75a0fea7-f13a-4670-8b69-97e90d05f7c8 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: Found a missing feature Id = [75a0fea7-377d-4b4f-b864-984379ed0f42]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: The feature with Id 75a0fea7-377d-4b4f-b864-984379ed0f42 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: Found a missing feature Id = [75a0fea7-9d96-4f02-a800-a3512154efcd]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: The feature with Id 75a0fea7-9d96-4f02-a800-a3512154efcd is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: Found a missing feature Id = [90cd055f-f21f-42c5-b3fe-bb67173583d4]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: The feature with Id 90cd055f-f21f-42c5-b3fe-bb67173583d4 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: Found a missing feature Id = [75a0fea7-0017-4993-85fe-c37971507bbc]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: The feature with Id 75a0fea7-0017-4993-85fe-c37971507bbc is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: Found a missing feature Id = [75a0fea7-fe65-41c3-a965-c5df83fb098b]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: The feature with Id 75a0fea7-fe65-41c3-a965-c5df83fb098b is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: Found a missing feature Id = [75a0fea7-7c51-4a75-92c1-cbaccb371622]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: The feature with Id 75a0fea7-7c51-4a75-92c1-cbaccb371622 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: Found a missing feature Id = [75a0fea7-b0ef-434e-90d6-ce997d970564]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: The feature with Id 75a0fea7-b0ef-434e-90d6-ce997d970564 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: Found a missing feature Id = [75a0fea7-37d2-484b-b362-dcff1538e2a4]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: The feature with Id 75a0fea7-37d2-484b-b362-dcff1538e2a4 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: Found a missing feature Id = [49c44827-4747-4e89-999c-f199ad95cfa8]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:56 PM]: The feature with Id 49c44827-4747-4e89-999c-f199ad95cfa8 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:56 PM]: Found a missing feature Id = [75a0fea7-42e8-4527-8313-f63c4c49a7e6]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:56 PM]: The feature with Id 75a0fea7-42e8-4527-8313-f63c4c49a7e6 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:56 PM]: Found a missing feature Id = [75a0fea7-a4ce-4a83-867d-f6be0ffdd867]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:56 PM]: The feature with Id 75a0fea7-a4ce-4a83-867d-f6be0ffdd867 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPSiteWssSequence] [ERROR] [3/11/2014 5:32:40 PM]: Action 4.0.23.0 of Microsoft.SharePoint.Upgrade.SPSiteWssSequence failed.
[OWSTIMER] [SPSiteWssSequence] [ERROR] [3/11/2014 5:32:40 PM]: Inner Exception: Já existe um campo com este nome.
O nome especificado para este campo é igual ao de outro campo da lista. Escolha outro nome e tente novamente.<nativehr>0x81020013</nativehr><nativestack></nativestack>
[OWSTIMER] [SPSiteWssSequence] [ERROR] [3/11/2014 5:32:40 PM]:
at Microsoft.SharePoint.Library.SPRequestInternalClass.UpdateField(String bstrUrl, String bstrListName, String bstrXML)
at Microsoft.SharePoint.Library.SPRequest.UpdateField(String bstrUrl, String bstrListName, String bstrXML)
[OWSTIMER] [SPSiteWssSequence] [ERROR] [3/11/2014 5:32:40 PM]: Exception: Já existe um campo com este nome.
O nome especificado para este campo é igual ao de outro campo da lista. Escolha outro nome e tente novamente.
[OWSTIMER] [SPSiteWssSequence] [ERROR] [3/11/2014 5:32:40 PM]:
at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)
[OWSTIMER] [SPUpgradeSession] [ERROR] [3/11/2014 5:32:40 PM]: Upgrade [SPSite Url=http://sjkqa41:7779] failed. Microsoft.SharePoint.Upgrade.SPSiteWssSequence has the ContinueOnFailiure bit set. Moving
on to the next object in sequence.
[OWSTIMER] [SPUpgradeSession] [ERROR] [3/11/2014 5:32:40 PM]: Inner Exception: Já existe um campo com este nome.
O nome especificado para este campo é igual ao de outro campo da lista. Escolha outro nome e tente novamente.
[OWSTIMER] [SPUpgradeSession] [ERROR] [3/11/2014 5:32:40 PM]:
at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)
at Microsoft.SharePoint.Library.SPRequest.UpdateField(String bstrUrl, String bstrListName, String bstrXML)
at Microsoft.SharePoint.SPField.UpdateCore(Boolean bToggleSealed)
at Microsoft.SharePoint.SPFieldIndexCollection.IndexOneField(Object field, Boolean bIndexed)
at Microsoft.SharePoint.SPFieldIndexCollection.Add(SPField field)
at Microsoft.SharePoint.Upgrade.RestoreWorkflowAndDatasourceLibraryPermissions.Upgrade()
at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade()
[OWSTIMER] [SPUpgradeSession] [ERROR] [3/11/2014 5:32:40 PM]: Exception: Action 4.0.23.0 of Microsoft.SharePoint.Upgrade.SPSiteWssSequence failed.
[OWSTIMER] [SPUpgradeSession] [ERROR] [3/11/2014 5:32:40 PM]:
at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade()
at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object o, Boolean bRecurse)
[OWSTIMER] [SPUpgradeSession] [ERROR] [3/11/2014 5:37:44 PM]: Upgrade Timer job is exiting due to exception: Microsoft.SharePoint.Upgrade.SPUpgradeException: Upgrade completed with errors.
Review the upgrade log file located in C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS\Upgrade-20140311-164603-307.log.
The number of errors and warnings is listed at the end of the upgrade log file.
at Microsoft.SharePoint.Upgrade.SPUpgradeSession.CheckPoint()
at Microsoft.SharePoint.Upgrade.SPUpgradeSession.LogEnd()
at Microsoft.SharePoint.Administration.SPUpgradeJobDefinition.Execute(Guid targetInstanceId)
Despite all the erros, can I consider these farm updated in terms of SharePoint build?
Thanks
J.Clua -
The ovmcore-console libraries were not found on the system!!
Hi all,
I need help to open serial console from Oracle VM Manager GUI.
I'm using the beta version 3.3 of Oracle VM Manager and the agent with Oracle VM Server 3.1 installed on a SPARC Enterprise T5240.
I created a virtual machine with the manager, but when i try to launch serial console i have the following message:
"Error 404: Page not found.
The ovmcore-console libraries were not found on the system.
Please install the correct ovmcore-console rpm suitable for your system on the Manager server.
See the Oracle VM Installation Guide for additional information."
any help ?Thank you for testing Oracle VM Manager 3.3 beta.
We are still reviewing ovmcore-console package and have not made it public yet. Meanwhile, please use the following workaround to access the VM console:
You can redirect the remote port to local using the ssh(1) command.
1) From Oracle VM Manager UI, find out the UUID of the virtual machine. For example: 0004fb0000060000e98127266687b615.
2) Log into Oracle VM server (dom0), use xm list command to get the domain id. In this example, the domain id is 2. The VNC port number will be 59xx, starting with 5900.
# xm list -l 2 |grep 59
(location 127.0.0.1:5900)
3) From your own desktop, then you can execute the command in a local shell to redirect the port to your desktop:
$ ssh -L 12345:localhost:5900 -N -f root@OVS
4) The "5900" port will be redirected to "12345" of your local desktop, so that you can run the following command to connect the guest console:
$ vncviewer local:12345
5) For Windows, you can set up an ssh tunnel by using PuTTY for example. -
Tax Code does not exist in the system (T007A)
Hi All
When we try to create a receipt for a particular expense type in ESS Travel & Expenses, we get the follwing error "Tax code Z0 does not exist in the system (T007A)". Upon creating a tax code Z0 it gives the following error "Tax code does not exist in the system (T007A)". When we change the Receipt currency to USD instead of Bristish Pound it gets accepted without the error. It works perfectly fine when expense report created using GUI. The error occurs only when we create the expense report using Portal ESS T&E. I was not able to find anything related to this in the SDN. If any of you could help me out, that would be great.
Thanks, RajHello Mr. Raj!
I checked the related issues that other customers reported.
I came up with a list of things you can try that may help you solve your issue.
a) Check if the field V_706D_B-LAND1 is filled with the home country in the IMG step 'Define Global Settings'. So may I ask you to check. Moreover, if this is not the reason, may I also ask you, if you get the same error when using our backend test transaction PR_WEB_1200? Thank you,
b) Could you please check that you don't have any expense type with value " "(blank) in the tax code field in V_T706B1?
c) Apply Note 1129853 - Web: Input tax code for credit card receipts
d) Please follow in IMG:
Financial Accounting
Travel Management
Travel Expenses
Master Data
Control Parameters for Travel Expenses
Define Global Settings
Input Tax
Country { Your country here }
Enter an input tax code for 0% input tax [ ] <<<
If here it's blank, this must be filled with a tax code. I found this out when I set the field "Input Tax per Travel Expense" then I get a warning "Enter an input tax code for 0% input tax".
The reason for this is that in your system, you don't have a "blank" tax code and it looks for this entry. Please kindly define a tax code in this setting.
I hope I was able to help you with this information.
Wilian Segatto
SAP Support - HCM/XSS -
Checklist _ product does not exist in the system
Hello experts,
I am customizing Checklist for CRM 7 Service.
However, I am struggling as I have the following error : "Item 20: The product does not exist in the system". Indeed, I have seen that the checklist creates an item with the item category 'FCHK' in the transaction type. However, the product for this item is empty in 'crmd_order' and creates error in the web_ui. Another error appears, which is linked to the first one, 'Item20:The item category FCHK is not permitted for the product'.
Any help on the checklist customizing would be appreciated.
Regards,
Anaïs JaussaudHi Anais,
Please go through : How to Configure Checklists in SAP Solution Manager 7.1 -- Part 1
Also please see that item category determination has to be set for the check list product other wise no determination will take place properly
<Transaction type> + CKCU = CHKL
/Hasan -
Contract Accounts Receivable and Payable is not installed in the system
Hi ,
while i am executing EC sales list report i am getting the error as "Contract Accounts Receivable and Payable is not installed in the system".
could you please explain me what is contract accounts receivable and payable means and how to install it in the system.
Thank you.
Best regards,
RajeswariTypically this is installed with an Industry Solution, such as Utilities or Schools, were you have thousands of customers/accounts.
Most places probably just use the standard AP/AR functionality.
Thanks,
Tammy -
PO does not exist in the system
Hi,
While creating sales order PO not given and saved the Sales order with out PO No. Again in change mode realised that PO not given and when im trying to give PO following are the error message.
Purchase order 428264 does not exist in the system (see long text)
Message no. V1583
Kindly send the responses.
Thanks
Madhu.Hi,
I am taking two different posts from this thread:
1st:
1. Sales order been created with out PO number.
2. In the change mode system allows to key in PO number.
3. When keying in the PO number system throws an error ' PO 12345 does not exist in the system".
Now my query is how to find the right PO number.
Following are the long text.
Purchase order 12345 does not exist in the system (see long text)
Message no. V1583
Diagnosis
You are creating an order for a consolidated company and must eliminate internal business volume. For this reason, the system tries to determine if the related purchase order exists. This is not the case, however.
Procedure
Enter the relevant purchase order number
This sounds as you go to T. Code: VA02, Keyed-in your Sales Order No. and then hit "Enter". Now inside Sales Order, you are trying to key-in P.O. No.
Now, 2nd post:
Im sorry the issue is not resolved yet. The PO No which user is keying in the sales order is quite unique. When i checked the previous PO's in that series it is there. But the issue is for the given set of sales area it is not there.
Following are the steps performed:
1. In VA02 in search critria given the series (OCJ*).
2. There are set of sales orders available for the given series.
3. But these series of sales order are from different set of sales area.
4. There are no sales order available in the series for the given sales area.
Kindly suggest whether im missing any config setting?
Which suggests as you go to T. Code: VA02, and inside field: Sales Order, you Press F4 (or you have entered P.O. No. under Tab: Search Criteria).
Now, there are few queries:
1. Have you entered P.O. No. within Sales Order, while created? If not, then how come System will search for Sales Order, having specified P.O. No.?
Secondly,
If, you are searching through F4 and you have created Sales Order with the same P.O. No., then within new window that pops-up; go to tab: Sales Document according to Customer PO No.
Field: Purchase Order No.
key in your filter condition (P.O. series with appropriate *) and make Field: Maximum hits, blank. System will throw all the Sales Order, having P.O. Series based upon filter condition.
Now, SORT the output based upon either "Purchase Order No." or "Sales Org".
Hope, i have understood your query, now.
Best Regards,
Amit.
Note: Remember, if there is no such Sales Order with desired P.O. No., system will not list-out it in search. To do so, you have to attach P.O. No. within Sales Order under field: Purchase Order. -
I have rented a movie 8hours ago, and it will NOT play. The system also charged me twice, for the same movie! How can you help me please?
For the film not playing, you can use the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that film and use the 'Report a Problem' link.
Not sure whether you can request a refund for the double charge via the same link, if not then you can contact iTunes support here : http://www.apple.com/support/itunes/contact/ - click on Express Lane, then iTunes > iTunes Store -
System Preferences not working from the Apple Menu
Howyeh!
So I made the mistake (for me) of upgrading to Leopard. Discovered that my version of Quark doesn't work at all with it, so had to downgrade back to Tiger. Having done so, and run the combined update, my System Preferences don't work any more, when I try to access them via the Apple menu. They work fine if I go into the Applications folder and manually open them, just not the Apple menu (or if I option click on the desktop background.)
I've verified/repaired permissions in disk utility, as well run Techtool Pro in an effort to get it working, and deleted the System Preference plists in my users/library/preferences folder.
Finally, I located the cause of this (I think). All the prefPane files located in the system/library/prefpanes folder are set to open with System Preferences 5.0, which I believe is a Leopard component, which has a completely different icon than good ol' 3.5. I notice too that when I try to run System Preferences from the Apple menu, this odd icon version appears in the "recent items" list.
Okay - so the upshot seems to be that the version of system preferences being referenced by the system is the newer leopard version. Only thing I could think of doing was zapping the PRAM, but that didn't do the trick. So how can I revert back to the old version being used?Ooop, just ignore me. Deleted the System Preferences in the Previous System folder, and everything's hunky dory (for now!)
-
How to Uninstall Yosemite? System does not allow Erase the HD, nor does it allow re-install of original O/S Disc (10.6.7). I want Mavericks or even Lion Back. Thanks.
Start with reinstalling Snow Leopard:
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. After you finish Setup Assistant will complete the installation after which
you will be running a fresh install of OS X. You can now begin the update process
by opening Software Update and installing all recommended updates to bring your
installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1 Access the App Store to download Mountain Lion or Yosemite. Mavericks is no longer available since the release of Yosemite. If you purchased Mountain Lion from the App Store, then you can redownload it via your Purchases page in App Store. If not, then you will need to purchase it from Apple;
Purchase a redemption code at the Online Apple Store: OS X Mountain Lion. Mountain Lion is $19.99 plus tax. Use the code to redeem a download of Mountain Lion from the App Store. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless. -
Error message: this computer is not supported by the system recovery media.
I replaced a bad samasung hard drive in my Pavilion dv6z 3200 with a Seagate Momentus XT 750 GB 7200RPM SATA 6Gb/s 32 MB Cache 2.5 Inch Solid State Hybrid Drive ST750LX003 and when trying to restore Windows 7 64 bit OS get the error message "this computer is not supported by the system recovery media"
Is the new hdd at least as large a capacity as the original? Can be larger capacity, but sometimes smaller will cause error.
Enter BIOS by tapping F10 key. Is all system info intact/complete?
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
Error Message: "Skype can not start because the system is not available"
Try to reset all Skype settings. Quit Skype or use Windows Task Manager to kill any Skype.exe process. Go to Windows Start and in the Search/Run box type %appdata% and then press Enter or click the OK button. The Windows File Explorer will pop up. There locate a folder named “Skype”. Rename this folder to something different, e.g. Skype_old. Next go to Windows Start and in the Search/Run box type %temp%\skype and then press Enter or click the OK button. Delete the DbTemp folder. Restart Skype. N.B. If needed, you will still be able to re-establish your call and chat history. All data is still saved in the Skype_old folder.
Okay!
I'm newbie here, but it doesn't matter. I dont want to do here anything else, just write off my opinion about the Microsoft's "new" Skype, and I hope they will read...
This is a cropped image - of course hungarian, because I'm hungarian, but I think many of us could see this as well. How this is possible? "The Skype can not start because the system is not available" *** What kind of system? The Skype was on a P2P system, where is impossible that the system is not available! This is why the skype was much better than the Microsoft's messenger. Then they bought it, and make it wrong...
I found a solution for this problem, this can happen if my client is not updated. But IT IS!
How does it works? Can we use the **bleep** Skype how we would like to use? Or this time we need to find an other application (like Viber), and using that while they not buying that as well, just because that is better?
Edited to conform with the Community Guidelines
Subject/title edited to better reflect post content. -
Trip country IN / trip region do not exist in the system (T702O)
Hi Experts,
While creating Travel request in TCode TRIP I am getting this error"Trip country IN / trip region do not exist in the system (T702O)"
But the table T702O does not exist when i checked in SM30. Can u please tell me how to solve this error.
Thanks and Regards,
ShilpaHi Shilpashree,
I am also facing the same problem. I maintained T702O table, schema & V_T706O. But still facing the same problem.
Please help to sort the issue. Even i had followed some of the SDN links:
Trip country IN / trip region do not exist in the system (T702O)"
Re: Trip country IN / trip region do not exist in the system (T702O)
Error while Creating Travel Request ..thru TRIP
Thanks in Advance
Maybe you are looking for
-
Possible to prevent Acrobat 7 saving private data from a form to temp file?
I have a PDF order form with interactive fields that I want to post on my client's website. The form, created in Acrobat 7, is meant to be completed online then printed for faxing or mailing. It includes a field for a VISA number. I notice that once
-
Hi all, Just looking for some opinions please. My partner has a Samsung soul phone which she hates, and she likes the idea of an iphone, as I have had one for a year now and rave about it constantly. She has a laptop, and loves music, so uses itunes
-
EventListeners, bindingUtils, garbageCollection and you...
Hey everyone, I hope somewhere can help me with this, because I have been running in circles on this. I am developing on a fairly large application and have recently noticed that instances of my class that have event listeners of data binding tied to
-
Offline installer for Adobe Reader
I'm trying to download offline installer of latest Adobe Reader for bulk installations on PCs in my company. It used to be simple and last version I got was 11.02. Latest version forces me to register for distribution of Adobe software. Fair enough,
-
When trying to install Create Cloud get A12E5 - meaning?
I am using the 30 day trial and downloaded it to a desktop only to discover I really need it on my laptop. So I'm attempting to download on my laptop but now I get error A12E5. Does this have something to do with only allowing one download? The er