System Landscape Management Overview - no CCMSPING data available!

Hi All
We are currently trying to fully configure monitoring for our SAP landscape Java and ABAP so it can be viewed in the Work Center Web page.
However, on the 'System Landscape Management Overview' we have the message 'no CCMSPING data available' for all of our systems, even though we have CCMS ping setup.
Does any one know what I can check?
Thanks
Phil

Hi Vital
I have gone through those setting in RZ20, and RZ21 however we do seem to have a multitude of red and I am note sure where to start getting them set up or actioned. I have the following marked as red:
Transaction RZ20 "SAP CCMS Technical Expert Monitors -> Selfmonitoring CCMS Agents", the CCMSPING should show green.
CSMS Selfmonitoring -> Tool Dispatching -> Messages ->
             Background method dispatching not possible - job does not exist
CSMS Selfmonitoring -> Central Performance History ->General CPH status information
        Data collection message           No central data collection (hourly values) for system SMP Reorganization message            The CPH reorganization has not been executed for a long time
MoniInfra_ARMIDALE_SMP_00 -> Tooldispatching (short running tasks)
        Messages             Cannot start tool CCMS_MSS_APP_SLOW_SQL
STARTUPTOOL_00026    Startup method error: CCMS_MSS_APP_SLOW_SQL (method dispatcher: SAP_CCMS_STARTUP_TOOL_DP, Time: 21.05.2008, 09:24:09, Status: LAUNCHED)
STARTUPTOOL_00033    Startup method error: CCMS_MSS_PERF_CPU (method dispatcher: SAP_CCMS_STARTUP_TOOL_DP, Time: 21.05.2008, 09:24:09, Status: LAUNCHED)
STARTUPTOOL_00034    Startup method error: CCMS_MSS_PERF_DATACACHE (method dispatcher: SAP_CCMS_STARTUP_TOOL_DP, Time: 21.05.2008, 09:24:09, Status: LAUNCHED
STARTUPTOOL_00035    Startup method error: CCMS_MSS_PERF_IOSTATS (method dispatcher: SAP_CCMS_STARTUP_TOOL_DP, Time: 21.05.2008, 09:24:09, Status: LAUNCHED)
STARTUPTOOL_00036    Startup method error: CCMS_MSS_PERF_PROCACHE (method dispatcher: SAP_CCMS_STARTUP_TOOL_DP, Time: 21.05.2008, 09:24:09, Status: LAUNCHED)
STARTUPTOOL_00058    Startup method error: WS: SRT_Data_Collector (method dispatcher: SAP_CCMS_STARTUP_TOOL_DP, Time: 21.05.2008, 09:24:09, Status: LAUNCHED)
SMP\CCMS database self-monitoring\... -> Database self-monitoring
        SQL Server    create_mss_space_mgmt: function call SALI_MT_GET_TID_BY_NAME failed with exception NAME_NOT_FOUND. Affected MTE: ., Red 21.05.2008 , 09:24:09
I think I will need to get this fixed first - I am just suprised we have all of these errors when we have only installed the CCMSPING service?
An help or advice would be great
Thanks
Phil

Similar Messages

  • System Landscape directory not available error,

    I am still a beginner, and I am having some slight trouble understanding, what tools would be needed, and how to install. I am using the forums.
    We have the MII Discovery Server up and running.
    NWDS Server installation is done.
    We have the MII track ready to be used for Development(SLD URL is available) , Userid and password available
    I am working on installing the NWDS 7.3 Developer Workspace.
    Would I also need to do NWDS Server install on my laptop?
    Would these steps be sufficient?
    1. Download and install JDK 1.6
    2. Copy the file nwds-extsoa-7.3-SP00-PAT0000-win32.zip from:
    <your download location>\51039309\DATA_UNITS\JAVA_IDE\distros\com.sap.netweaver.developerstudio.distribution.complete.extsoa\8.30.0.101020102100
    to a convenient folder.
    3. Extract the content and you will have a folder with name eclipse.
    4. Launch the Netweaver Developer Studio from folder eclipse, you may want to create a shortcut on the Desktop.
    5. If you haven't maintained JAVA_HOME property or if it's pointing to some other java version, eclipse will complain about it. In the dialog window locate the JDK 1.6 installation. Path to JDK 1.6  should be something like
    C:\Program Files\Java\jdk1.6.0_25\bin
    6. Restart the NWDS after this and select a suitable workspace.
    7. Set the run time engine in NWDS, by going through the menu path:
    Window->Preferences->SAP AS JAVA
    Question:
    1. I am unable to Set the run time engine in NWDS, please could  you give me details steps with what I would need to enter for Instance Hostname and Instance Number...etc
    2. As part of Development installation do I have to Modifying the Logon Page? Do I have to go thru the Server installation in order to start developing on eclipse environment?
    I do not have the war file. How do i  Copy the war file tcsecumelogonui.war from
    <Installation drive>:\usr\sap\<SID>\J00\j2ee\cluster\apps\sap.com\com.sap.security.core.logon\servlet_jsp\logon_ui_resources\tcsecumelogonui.war
    3. System Landscape directory not available error,
        In the Component Browser when I right click and select New u2013 Development Configuration u2013 Import From System Landscape Directory (SLD) u2013 Next (Enter UserID and Password)
    Thank you

    Hello,
    For the SLD error, please,  configure SLD following as per this docuemtnation:
    http://help.sap.com/saphelp_nw04/helpdata/EN/bb/c2b6421a75da11e10000000a155106/frameset.htm
    Regarding the settings to enter NWDS to connect to AS Java, you have to enter the java instance data so that NWDS can connect to it in order to make deployments, etc....
    Please, see also the following documentation that explains stp by step how to work with NWDS.
    http://help.sap.com/saphelp_nw04/helpdata/en/fe/a3996fa314f94f8a0c3475b08636d0/frameset.htm
    I hope this helps you.
    Regards,
    Blanca

  • CCMSPING rz20 availability shows 100% - turns grey - satellite system down

    Hello All
    I have an issue in CCMSPING RZ20 availability reporting.
    Even if the satellite system is down completely (3 app server + 1 CIDB), its availability reporting in RZ20 for CI instance shows 100% - turns grey after soem time still showing 100% - Value is obsolete after some time still showing 100% in grey.
    My solution manager is on EHP1 SP04 (SPS20) recently upgraded from EHP1 SP02 (SPS18). Prior to upgrade it was working fine all the availability reporting used to show 0% when system is down. however after upgrade this weired behaviour started.
    As it now showing 100% always no matter system is down completely, we are not able to trigger alerts in this case.
    If anybody faced the same issue and found the solution to it, kindly assist.
    Thanks
    Shoeb

    Dear  Shoeb Ali,
    I am consient that your message is old! But I have the same issue on my system and I wondering if you had found a solution for this issue?
    Many thanks for your help..
    Regards,
    Emmanuel Coindre.
    [www.emmanuelcoindre.fr|http://www.emmanuelcoindre.fr]

  • No system load data available in st03

    Dear Guru,
                  When i am executing Tcode ST03 it is showing that "No system load data available"
    when i am executing "RSSTAT83" report then its thriwing "LOGDB_SSCR_NOT_FOUND" dump.
    statndard job getting cancelled thats why i hae change the status of all standard btc jobs.
    but system is still too much slow. Right now there is no job running.my patch level is also 14 of both abap & basis.
    What to do......

    Hi Gaurav
    this kind of error belongs to In correct time Zones, OS Time and R/3 Time was different, please set both time zones same in all clients using STZAC Tcode
    again if not slove your problem then fallow this procedure.
    It is possible that the workload collector is not schedule. To schedule the collector, choose, in Expert user mode, Collector -> Perf. Monitor Collector -> Execution Times in the left subscreen. The system displays the Contents of table TCOLL screen. Ensure that the report RSSTAT83 is scheduled hourly.
    if not scheduled hourly, then execute aboue report in SE38
    Regards
    Bandla

  • Info IDoc received with status 8 in BI but Data available in source system

    Hello Experts,
    I am loading Budget Period (attributes) into PSA in BI.
    Budget Period data Loading Issue : No data available while loading. But source system ie ECC has data in that data source
    Data source: 0PU_BDGTID_ATTR
    This is full load.
    I checked that whether I am making any mistake during data selection. I could not find any issue. Message while loading data into PSA (Yellow Traffic light)
    No data available
    Diagnosis
    The data request was a full update.
    In this case, the corresponding table in the source system does not
    contain any data.
    System Response
    Info IDoc received with status 8.
    Procedure
    Check the data basis in the source system.
    Already looked this thread and googled also.
    Re: IDoc received with status 8.
    Check points:
    sm58 - NO issue
    BD87 in ECC (RSINFO Idoc status: 03) -sucessful
    BD87 in BI (RSINFO Idoc status : 53)
    ST22 - NO issue
    sm37 - Job is successful (I could see Idoc no in ECC source system in Job log)
    I am not sure if I am missing any thing.
    Thanks
    Rana

    Hi all,
    I've got exactly the same issue with several extractors. I'm inialising the Master Data in a all new system, in the Quality the loads succeeded but in Prod it failed.
    For instance with the basic DataSource "0FUNCT_LOC_TEXT", I've made the following test:
    RS3 (R/3) - > 0 data
    ST22 -> no short dump
    WE05 (Idoc) - > everything is ok
    I reactivated the Datasource in R/3 (RSA5) and then deleted it and replicated it in BW but the same issue occured.
    Any ideas?
    Thanks
    jak

  • [Integration Engine Configuration Data] Error: No access to system landscap

    Hi all,
    When configuring Integration Engine Data (To go to 'Integration Engine Configuration Data' screen: Tcode: SXMB_ADM -> Choose: Integration Engine Configuration -> F8), we want to load Configuration from System Lanscape by choose F6, an error occur with message as below:
    No access to system landscap
    So that we can't load configuration from our System Landscape.
    We have correctly configured other below:
         - We use http port for corresponding Integration Server.
         - Business System with role 'Integration Server' created correctly in SLD.
         - T-code SLDCHECK is all OK.
         - T-code SXI_CACHE is all OK.
    Anyone can please help me correct this error ?
    Point will be reward for any valuable answer,
    Thanks a lot,
    Vinh Vo

    Please can you check if your RFC destination SAPSLDAPI and LCRSAPRFC are working both ABAP and Java stack.
    just check the reply from Udo and jai's reply
    R3 Connecte XI 3.0  Problem
    also check page no 18
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bd5950ff-0701-0010-a5bc-86d45fd52283

  • TS3276 Most attachments from a specific address (work) can not be opened, identified as winmail.data and no data available. Not sure if this is based on the e-mail coming from a windows based system, too old of a windows based system or simply how i have

    Most attachments from a specific address (work) can not be opened, identified as winmail.data and no data available. Not sure if this is based on the e-mail coming from a windows based system, too old of a windows based system or simply how i have it set on my Mac.

    Brightbleu wrote:
    Most attachments from a specific address (work) can not be opened, identified as winmail.data and no data available. Not sure if this is based on the e-mail coming from a windows based system, too old of a windows based system or simply how i have it set on my Mac.
    Winmail.data are not usable files. They just preserve RTF within the message.
    http://support.microsoft.com/kb/278061
    Cheers
    Pete

  • System Landscape Availability Application

    Hi,
    I am trying to create an application which would display the System Landscape Availability. Like when the portal was restarted, till what time it was available, when the back up portal was available, etc.
    Where I can find such System information? What API I need to use? Are there any standard iviews which would fulfill my requirement?
    Regards,
    Vaibhav
    Edited by: Vaibhav Khairnar on Aug 19, 2010 4:22 AM

    Hi,
    Please go thr the below links, i hope it will help you
    http://help.sap.com/saphelp_nw04s/helpdata/en/9a/e74d426332bd30e10000000a155106/frameset.htm
    /message/8039639#8039639 [original link is broken]
    Thanks,
    Sreeni.

  • Change name system landscape in System Landscape overview

    Hello colleagues,
    How to change the name productivo in system landscape overview?
    In the properties object i cant modify,
    Thanks

    right click to the object select open --> properties and change the name... (make sure you click on modify properties)

  • Defining CMS Track Data for 4 systems landscape

    Hi all,
    We are configuring CMS for 4 system landscape (DEV - TEST - QA - PROD).
    The Track Data only allow 3 system landascape , as we can see "Landscape Configurator " and also in the following documentation:
    http://help.sap.com/saphelp_nw04/helpdata/en/e9/c7cb6545a3446b92eff4f9ba876072/frameset.htm
    XI Repository URL DEV
    HTTP address of the server on which the XI development system is installed
    XI Repository URL CONS
    HTTP address of the server on which the XI consolidation system is installed
    XI Repository URL PROD
    HTTP address of the server on which the XI production system is installed
    The question is :
    " How can we define Track Data for 2 Consolidation Landscapes " ?
    Thanks
    Artur Moreira

    Hi,
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f85ff411-0d01-0010-0096-ba14e5db6306
    Also...
    How to configuring the CMS for XI?
    Please see the below links
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d8f7b2-0701-0010-b09a-cda4cca2c98e
    Where can I get installation files of DTR, CBS, and CMS?
    https://websmp201.sap-ag.de/~form/sapnet?_SHORTKEY=01200252310000071155&_SCENARIO=01100035870000000202 -> How to Guide on
    'How ToTransport XI Content Using CMS'.
    /people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
    Regards
    Chilla

  • System Landscape Availability

    Hi,
    I am trying to create an application which would display the System Landscape Availability. Like when the portal was restarted, till what time it was available, when the back up portal was available, etc.
    Where I can find such System information? What API I need to use? Are there any standard iviews which would fulfill my requirement?
    Regards,
    Vaibhav

    Hi,
    Please go thr the below links, i hope it will help you
    http://help.sap.com/saphelp_nw04s/helpdata/en/9a/e74d426332bd30e10000000a155106/frameset.htm
    /message/8039639#8039639 [original link is broken]
    Thanks,
    Sreeni.

  • ST03 No System Load data available

    Hi Experts,
           When am trying to execute ST03, it displaying the alert message like: No System Load Data available, can u plz, tell me why it's happening.
    Regards
    Mark

    hi mark,
    make sure all the default background jobs are running properly, make sure the following profile parameters are set
    stat/as_collect   = 2
    stat/as_level  =   1
    the following specify the maxiimum  number of simultaneously existing dialog step or application statistics before the oldest data is deleted.
    stat/as_max_files
    stat/max_files
    you must also activate the individual components of the application statistics by calling st03n and choosing
    collector & perf. database -> statistics records & file -> application statistics

  • ST03N, No System Load Data Available,  RSSTAT83, LOGDB_SSCR_NOT_FOUND

    Dear SAP Experts
    I am unable to execute "ST03N", the message is "No System Load Data Available".
    System information said that I have to schedule RSSTAT83 hourly in TCOLL table, and I did that.
    (For your information, I also already schedule RSCOLL00 hourly)
    But when the job RSSTAT83 run, it was cancelled.  The ABAP DUMP says "LOGDB_SSCR_NOT_FOUND". Error in SAP Kernel, The current ABAP "RSSTAT83" program had to be terminated because ABAP processor detected an internal system error.  Internal program table SSCR not found. I checked SSCR table through SE11 and the table exists.
    Strangely this only happen in my Production system, my Development running well with ST03N
    And Yes I have been searching through this forum and Google, but not yet found the solution. The only solution I've got is update my kernel.
    Are there any solutions for this problem?
    Regards,
    Kursteilnehmer

    Hi
    Your Database Not supported . Please check background job log.
    Run se38 and execute RSCOLL00 one by obe via debug mode.
    You get the result
    Regards
    Ravi.S

  • "No management data available" message in SARA transaction

    Hi,
    I am trying for CRM data Archiving. After scheduling a job by "Write" button, when i click on "Management" button, it gives me a message "
    No management data available"
    I want to know why is this showing and is there is any configuration missing for this.
    Regards,
    Preetesh

    Hi Christophe,
    Thanks for your reply.
    In CRM_JEST table there are records which have status as "Can be archived" (I1100).
    Also when i schedule the job from SARA, it gets started then finished, but no spool list gets generated.
    I have activated the info structure also but no data is displayed.
    Plz let me know if I am missing any configutation.
    Regards,
    Preetesh.

  • System Landscape Overview iview not working

    Hi all,
    We are having problem with the System Landscape Overview iview, it doesn't load, and all i get is error saying check the logs, not sure what log to check.
    Please Help.

    Hi,
    Was this issue resolved ?  If so, how?  I am having the same issue and have the following message in the default trace file :
    #1.5#0003BAA58E77005800000007000007AE0003F5B7E82D27E3#1114595153225#com.sap.portal.ivs.semantic.systemLandscape#sap.com/irj#com.sap.portal.ivs.semantic.systemLandscape#Administrator#517####2544b390b70111d996150003baa58e77#SAPEngine_Application_Thread[impl:3]_2##0#0#Error#1#/System/Server#Java###System Landscape Overview errSN0001: Error in creating the iView.##
    Can anyone help please?
    Samir

Maybe you are looking for