System Landscape page will not show - still loading

Hi,
We have installed EP6.0 after updating SP16 , there are some ivews not showing. When you click system loading then finally we are noat able to see any ivews.
For example - System administation-system configuration -- then we are not able to see any ivews.
Some of the other menus are also same.
We are trying to login as "administrator".
After that we have created user with admin privilagtes , even no user not able to login into the system
Ay suggestions for this.
Thanks,
Chimsik

Hi,
1.Go To System Administration - > Permissions
Set Permissions for your users for Portal Content and check .
2.Also check whether you are using FQDN ie abc.company.com instead of IP address.
3.Also add an entry to c:/Windows/System32/Drivers/etc/host file
eg: 10.11.22.33 abc.company.com
Hope it helps.
Regards,
venkat

Similar Messages

Add Header Footer page will NOT show 100% horizontally

Using Acobat X ver 10.1.13 on WIN 8.1 - new install
when trying to use Add Headers Footers , the page will not show the Right side of the HeadersFooters page (pls see image attached) That is as wide as it will go, even on a large external monitor - so you are unable to enter
information in the other fields.
TIA
Doug

Post a link to the page please. Did you upload the Scripts
folder? If not,
then join the THOUSANDS of others who have made the same
mistake and gotten
their comeuppance here on this board.... (hint, hint)
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"techmanheffley" <[email protected]> wrote
in message
news:g9rumt$p3i$[email protected]..
> Trying to add a flash file in page. Will not show up on
website.
>
> It works if I do a F12 within dreamweaver (preview in
browser). But it
> does not work when I go to my website (tried IE7 and
Safari)

1 sheet with multiple pages will not show various page numbers

I'm having a difficult time differentiating between pages and sheets in Numbers. For example, I have 1 sheet with 5 pages. I am inserting page numbers (done, re-done several times after looking through the forum), but each page will not print with a sequential number (ie. 1, 2, 3, 4, 5). Instead, each page is 1. When I scroll over the number "1" on, say, page 3, the number 3 shows up. But unfortunately t will not print with anything but page number 1.

I am having a problem that is close to this, when I try and preview my site in browser some of the pages show up as a white and gray blocks only. I can not seem to find any reason or connection to what pages are doing this. The only page that has a video seems to work fine. Its almost acting like the links are broken or something. Any help would be welcomed.
Thanks
Mike

Assessment - Planning Page will not show in Custom MSS Role

I have gone through the Notes/Docs for setting up OBN for Performance Management and have implemented the same.
Now if I go to the Standard MSS role and try to open up Assessment > Click on 'Create' for Succession Planning, it works fine by showing up the Talent Assessment window where it can be completed.
Now, we have a custom MSS role copied from the standard one and I have included the same Talent Management workset (with the page, folder inside - just like the standard role).
But when I try the same scenario as above (Z_Manager_role > Talent Management > Assessment (from Service Map) > Click on Create under Succession Planning), I get the following error.
There is no iView available for system "SAP_ERP_HumanResources": object "employee". For more information, contact your administrator.
Why would it work on the standard role and not the copy? Any directions highly appreciated.
FYI. We are on 7.01 SP8, SAP_MSS 600 SP18
Thanks,
BR
Edited by: BR on Oct 5, 2011 12:38 PM
Edited by: BR on Oct 5, 2011 12:39 PM

Thanks Sidharth.
Sorry for not getting back earlier. I had opened a message with SAP. It looks like the problem has to do with Navigation Targets in my custom MSS role - so that is narrowed down now.
The following prerequisite applies: You must include the navigation targets (for the portal pages mentioned below) in your role.
pcd:portal_content/com.sap.pct/line_manager/com.sap.pct.erp.mss.bp_folder/com.sap.pct.erp.mss.14.bp_folder/com.sap.pct.erp.mss.14.pages/com.sap.pct.erp.mss.hcm/com.sap.pct.erp.mss.appraisal_document_wd_ui
pcd:portal_content/com.sap.pct/line_manager/com.sap.pct.erp.mss.bp_folder/com.sap.pct.erp.mss.14.bp_folder/com.sap.pct.erp.mss.14.pages/com.sap.pct.erp.mss.hcm/com.sap.pct.erp.mss.appraisal_document_pmp
How do I include these navigation targets in my custom MSS role? I mean these pages are not part of the role.
Thanks,
BR
Edited by: BR on Oct 14, 2011 11:46 AM

My music page will not show when clicked on?

Hi im having difficulty to get my ipod to load my music page when clicked on and dont know what to do to fix it? I was wondering if someone would be able to help me.

Try the following. Usually the first ones works:
- Reset. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod.

The gmail and Dell start up page will not show content. it says a conflict with browser. don't know what that means.

I'm unable to find what is wrong or how to fix. I also could not view video on websites as per usual but now that seems to be okay again, whether it was something I did or other mystery.

I don't know if this will work and I know nothing about the BT homehub, but it's worth a shot. Reboot the hub, unplug it for about 30 seconds and then plug it in again. Wait until the hub fully boots ups and then see if the iPad will recognize it.

The Index page will not show the title with Bookmarking and the Facebook "like" or "share"

When you utilize the Facebook Like button on your Muse created web pages, it carries the title over (from the Page Properties) and works fine, except for the Index. This also applies to bookmarking pages. When the Facebook like is used (and the sub window for Facebook opens) it is titled “Home” that’s it. When the index page is bookmarked it also says “Home”. Why won’t the whole title be used? Is there any way to correct this?

Hi,
Could you please provide the url of the site and let me take a look to your current settings,

6210 all-in-one -- prints fine on Win 7, but right side of horizontal page will not print.

HP 6210 all-in-one installed now on Windows 7 and prints fine. However, with landscape pages, will not print the right 1.5 inches of any NEW page I prepare, but pages prepared before on XP print fine. I've tried all adjustments and it just doesn't make sense to me whta is going on. HELP!!

I actually solved the problem myself by installing still another replacement set of print heads.
Mary

External Hard drive will not show up on startup

Hello,
When i leave my external hard drive (that I use to back up my system) in, it will not show up on the desktop. Is there any solutions i could try?
Thanks for your help
Brad

Ok, so you can see it, at least with Disk Utility.
OS X journeled is fine, but If you ever expect to use it to boot off of, you'll need to create a primary partition map set to GUID...do that as a first step, then confirm it is OS X format, name it, etc.
Once that is done, it should mount on the desktop - you can expect a message asking if you want to use it as a TM backup drive. You might need to restart to help keep everything updated.

4.01 automatic update today 4.29.11, now pages will NOT load at all, just hangs there saying connecting. Tried system restore, re-installing, only way to get it to work is to boot in safe mode. Running W7, 64bit, I5, 2.53 ghz, 4GB, ati radeon 5470

I've been using firefox 4.01 Today (4.29.11) it downloaded an update and now the pages will not load. I tried disabling the add ons, system restore, un-installed/re-installed but the page hangs there and just says connecting. I booted in safe mode with networking and it worked. Running W7, 64Bit, I5, 2.53GHZ, 4GB, ATI mobility radeon 5470

I've been using firefox 4.01 Today (4.29.11) it downloaded an update and now the pages will not load. I tried disabling the add ons, system restore, un-installed/re-installed but the page hangs there and just says connecting. I booted in safe mode with networking and it worked. Running W7, 64Bit, I5, 2.53GHZ, 4GB, ATI mobility radeon 5470

My facebook page will not load properly just shows the text headings on page no graphics like there should be.

My facebook page will not load properly just shows the text headings on page no graphics like there should be.

You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Page will not load

For two days I have tried to access Mozilla Firefox as my browser. The page will not load.

*http://kb.mozillazine.org/Error_loading_websites
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

I can make a WiFi connection but pages will not load. WiFi works for a laptop using windows

I can make a WiFi connection but pages will not load. WiFi works ok on a laptop using Windows. I have reset the WiFi settings but this makes no difference.

Thanks, Linc, but that almost helped:
Because the retina 15 only has a wifi connection (no ethernet), that's the connection I'm stuck with for the notebook. But on the 27iMac, I did have both ethernet and wifi enabled. When I turned the wifi off on the 27, therer was a brief moment when both computers were showing their counterparts when I tried to make a network connection. BUT, after a few seconds of 'searching', the computer I was trying to connect to disappeared from the Network list.
So I tried the opposite; the retina can only connect thru wifi, so that's a given. I swithched my ethernet off and then enabed the wifi on the 27 and ....same thing: When I try a network connection, there are a few seconds of 'searching', then the ony option I'm left with is share screen, which doesn't work either.
I've read the 'dropped' network is a problem with the retina, but the odd thing is that I never lose my internet connection—that continues to work fine, as does Air Drop—but I can't seem to connect, network-wise.
Any ideas about the dropped network?

A login webpage gives the message "This script requires that jquery.js be loaded first." then will not show the user ID and password login boxes. How can this be corrected?

A login webpage gives the message "This script requires that jquery.js be loaded first." then will not show the user ID and password login boxes. How can this be corrected?

That message is listed in two scripts on the bank's site. One function that can display the message is named PhotoRotator and the other is named PromoRotator. However, I can't seem to trigger the error myself.
If you have any add-ons that alter the page, such as ad blockers, try creating an exception for these sites and see whether that helps:
www.northrim.com 
www.northrimbankonline.com
You also could try this logon page: https://www.northrimbankonline.com/onlineserv/HB/Signon.cgi
(''Obviously you should be cautious about links offered on public forums to ensure you are not being phished! Check them out carefully before entering your username and password.'')

My iphone 4 screen went black and will not come back on, the screen lights up but is still black and will not show anything on the screen, it still vibrates though. help

my iphone 4 screen went black and will not show anything on it, the phone still vibrates and lights up but the screen is black, HELP.

I have a similar problem. I restored my iPhone 5 to the latest available OS. After completing the process the phone never restarted. The phone was fully charged when I restored it but now refuses to charge past the red battery icon. I have been able to get the phone in UFD mode several times and have been able to load the new OS on the phone. The Apple logo does come on and the software fully loads. iTunes tells me the phone will restart but never does. I left it to charge all night but it never appeared to load the battery. This morning I went to the Grand Central Terminal apple store for help. A woman at the store plugged the phone in but it never charged. She absolutely refused to believe that I got my phone in UFD mode and loaded any software on. I don't think it is a battery issue. The only solution I was given was to buy a new phone. Repairing it was out of the question. At this point the phone is completely useless. Thanks in advance for the help.

System Landscape page will not show - still loading

Similar Messages

Maybe you are looking for