System landscpe_implementation content

Dear friends,
I wants to upload implementation content for Supply chain ,SCM 5.0 in solution manager 4.0. from where i can upload that to solution manager?
I am refering OSS Note:883773. In this they have mentioned about so many product instances. What is mean by product instances?
In what way these instances bocomes important for uploading implementation content for SCM 5.0?
Please guide me
Senthil

Hi Dolores,
In Solar01, In "structure"tab, under secnario name, if i press F4, i am getting
SAP for consumer products. Under this i am having the following:
1.Brand management
2.DSD paperbased
3.Global data synchronization
4.Mobile DSD order to cash
5.Mobile DSD Van sales
<b>6.Responsive replenishment</b>--- Under this node i am having SAP ECC 6.0 & SCM 5.0, R/3 47 X 200 & SCM 4.1
7. Trade promotion management
My support pack level are:
ST-ICO-150_700-<b>0006</b>-SAPK-15076INSTPL
But what u told as latest is level 0007. What we have is 0006. How to upgrade the patch level?
Senthil

Similar Messages

Project Systems Business Content - Residual Order Plan

Hi all,
I a issue which I hope someone can help me with:
I am lodading data into cube 0PS_C08 and then into 0PS_C04 as per the BC. When I view the BC restricted key figure "residual order plan" i get nothing (blank).
I look in R/3 I have values for residual order plan. I have looked at the Help on SAP and they say there is some config that needs to be done in SPRO. I dont really understand what config needs to be done can someone help?
Many thanks,
Leo

Hi,
We are searching for project versions(project systems) business content :
Base tables :
VSAFVC_CN     Version: Operation in order
VSAFVV_CN     Version: Quantities/Dates/Values in order operation
VSAUFK_CN     Version: Order master data
VSEBAN_CN     Version: Purchase requisition
VSEBKN_CN     Version: Purchase requisition account assignment
VSJEST_CN     Version: Individual status per object
VSJSTO_CN     Version: Information on status object
VSKBED_CN     Version: Capacity requirement records
VSKBEZ_CN     Version: Additional data for table KBED (ind. capacities)
VSKBKO_CN     Version: Capacity requirements header for an order
VSKOPF     Version: Header - general data for a version -
VSKPER_CN     Version: Workforce Planning
VSMLST_CN     Version: Milestone
VSNPTX_CN     Version: PS texts (network)
VSPRHI_CN     Version: WBS, edges (hierarchy pointer)
VSPROJ_CN     Version: Project definition
VSPRPS_CN     Version: WBS element (work breakdown struc. ele.) mast. data
VSPRTE_CN     Version: Scheduling data for project item
VSPRTX_CN     Version: PS texts (WBS)
VSPSTX_CN     Version: PS texts (header)
VSRPSCO_CN     Version: Cumulation table for project reporting
VSSTEU     Version: Control table - one entry per version object -
I didn't find any relevent business content for above tables.
If anybody extracted these ,please let me know where and how they extracted.I will assign points.
Thank you,
GSR

Project Systems - Business Content

Hi,
We are trying to install Project Systems Business Systems. We are in process of creating technical specs.
In the help.sap.com or best practices ,There is no detail explanation is available (Source field,source table or logic to get the field).
Some of the data sources don't have documentation.
I hope many of you implemented Project Systems.
Please share your experiences about finding Source fields and tables.
Please share the documents : [email protected]
Thank you,
GSP
Thank you,
GSR

Hi,
We are searching for project versions(project systems) business content :
Base tables :
VSAFVC_CN     Version: Operation in order
VSAFVV_CN     Version: Quantities/Dates/Values in order operation
VSAUFK_CN     Version: Order master data
VSEBAN_CN     Version: Purchase requisition
VSEBKN_CN     Version: Purchase requisition account assignment
VSJEST_CN     Version: Individual status per object
VSJSTO_CN     Version: Information on status object
VSKBED_CN     Version: Capacity requirement records
VSKBEZ_CN     Version: Additional data for table KBED (ind. capacities)
VSKBKO_CN     Version: Capacity requirements header for an order
VSKOPF     Version: Header - general data for a version -
VSKPER_CN     Version: Workforce Planning
VSMLST_CN     Version: Milestone
VSNPTX_CN     Version: PS texts (network)
VSPRHI_CN     Version: WBS, edges (hierarchy pointer)
VSPROJ_CN     Version: Project definition
VSPRPS_CN     Version: WBS element (work breakdown struc. ele.) mast. data
VSPRTE_CN     Version: Scheduling data for project item
VSPRTX_CN     Version: PS texts (WBS)
VSPSTX_CN     Version: PS texts (header)
VSRPSCO_CN     Version: Cumulation table for project reporting
VSSTEU     Version: Control table - one entry per version object -
I didn't find any relevent business content for above tables.
If anybody extracted these ,please let me know where and how they extracted.I will assign points.
Thank you,
GSR

How to update content types enheriting from the System Page Content type

After importing a design package I found out that my content types was missing some columns. I could add the missing columns to my "page" and "Article Page" site content type. When adding the exisiting columns I could choose to update
everything that inherits from this type:
This is working. However I still miss 2 columns in the "Page" Content type:
1. Rollup Image
2. Hide physical URLs from search
If I roll back my dev environment I can see that these are inherited from the "System Page" content type which is not editable. The columns are in the "System Page" content type but They are gone in "Page" content type that
should inherit the columns.
So how do I update these?
Thanks

Hi Alex,
Thank you for replying. I totally agree with you regarding not to modify the OOB content types. The content types I have created/modified is also my own "new" content types.
However the designpackage import messed up the OOB content types somehow so I'm only trying to get back to the state before the import. The only thing I see is still missing is the two previously mentioned columns in the "page" content type.
Do you have any other suggestions in how to get back to the "OOB State"?
Thank you
Update: this is my page content type. It's not set to read only so it should update the last two missing columns from its parent (system page content type) right?

Presentable Content is not listed in a Lync Room System's "Content" page

I am using a Lync Room System version 15.11. I have problem getting the pre-loaded "Presentable Content"
I pre-loaded several PowerPoint and pre-worked some whiteboard for a scheduled Lync Meeting. Other Presenters using Lync 2013 client were able to check and browse these pre-loaded content using the "Manage Presentable Content".
However, the LRS (also a presenter) could only see an EMPTY CONTENT LIST.
Can anyone explain this?
Albert

Hi,
Did the issue happen just for one time or multiple times?
Please try to change the Permissions of Presentable Content from “Presenters” to “Everyone” then check again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

InfoPackages Missing in Project Systems Business Content

Hi all,
Just installed PS business content in a BW 3.5 system. Cubes, ODS's, etc are all OK. But should there be InfoPackages supplied?
Thanks!
Gerry.

Gerry
Welcome To SDN
Usually we will create our own info Packages based on our requirements like what cubes or ODS it should load also it is Delta/init/full. All these settings could be done in our info Packages based on our requirements.
Hope this helps
Thnaks
sat

Can't create user into backend system and contents in portal.

hi expert,
I installed EP(EP,BI-JAVA) as add in installation on existing BI-ABAP system based NW04s.
I can log on portal by abap user. But unubale to create any content and user in ABAP through portal.
What must be done after setup Addin JAVA STACK??
I assign following roles to test user.
Administrators :UME Database
Authenticated Users:Built-in Group Authenticated Users Built-in Groups Adapter
Everyone
but the error message is like "An error occurred in the persistence. The original and possible not translatet message was: "BAPI_USER_CREATE1@BWBCLNT100: ID=01, NUMBER=491, MESSAGE=You are not authorized to create users in group". Contact your system administrator. "
If anyone can advice me, it would be appreciated very much.
Regards
MASAKI

If this is what you mean "But unubale to create any content and user in ABAP through portal"....
creating users in portal is not possible since your UME is now linked to the ABAP in an add-in installation or a dual stack system users can only be created in the ABAP system and with the roles SAP_BC_JSF_COMMUNICATION_RO /without RO should let you create users in the ABAP stack....
you can only assign roles to users on the Portal for the ABAP users ...
heres the reason...
Combined AS for ABAP + Java installation
If you install an AS for ABAP + Java, UME is automatically set up to use the ABAP user management of the same Web AS installation. This option uses the configuration file dataSourceConfiguration_abap.xml.
AS for Java installation
If you install SAP Net Weaver AS for Java the UME is linked to the java database with users and groups in the Java system database, or if you want to subsequently connect an LDAP directory to the UME. This option uses the configuration file dataSourceConfiguration_database_only.xml

Multiple SAP systems - Single Content Server

In a production landscape with multiple SAP systems and a single Content Server, would it be more efficient to allow each Web AS to access the Content Sever directly or should there be a single dedicated Web AS to access the single Content Server?
We do not have any load data; we are trying to find out if there are any heuristics for such a configuration.
Message was edited by: John Ryan

You may use the SAP Content server for data archiving. If you use content server, you may not be be able to satisfy the legal requirements as SAP content server cannot support a WORM devise.
SAP do not recomment using SAP CS for Data archiving as well. SAP CS could be best used as a temporary content stoarge for non legal document images.

Content Server with File System Based Content Repository

Typically the SAP Content Server is installed with a SAPDB database. The content server software serves the content from the content repository - the SAPDB database.
I recall reading a few years ago about (unofficial?) plans from SAP to support file system based repositories, with the content server controlling access. So from a KPRO application perspective, whether the document was in a database or on a filesystem is hidden.
Can anyone tell me whether this is available yet? And if so, under Windows operating systems?
Regards
Andrew

HI Frank Weitzdörfer ,
Could you share about architecture of this scenario ?
Can I use a simple PC as content repository and keep content server and R/3 System in the same box and define some link between CS & PC based repository.
Regards
Gopal Jaiswal

How cacn I clear the system clipboard content? and notify

Hi all,
I have any question please,
-How can I clear the content of system clipboard?
-How can I notify if a paste failed, the application which start the cut, so not remove the elements which selected for cut? /Cut & paste between two applications/
Thx.

Hi,
try to search the forum as I did:
http://onesearch.sun.com/search/onesearch/index.jsp?charset=utf-8&qt=how+to+use+clipboard&rf=0&rt=1&nh=10&cs=0&y=0&x=0&col=developer-forums
L.P.

System Profiler Content File Directory Location?

Hello,
I recently changed out my microprocessor in my PowerBook G3 because my old one was not working properly. All works fine now as it is smoothly running 10.4.11. However, I look in system profiler and the serial number has changed to the new microprocessor and does not match the sticker on the bottom on the machine. I managed to modify the "About This Mac" and "Login Window" serial number just fine, but I am stumped regarding system profiler. I did research and found that in 10.5, you can manually input the serial by finding a "SMBIOS" type file architecture in the extensions folder of System>Library. My question is:
Where can I find the system files that give System Profiler its information. or Where can I find the equivalent in 10.4 to 10.5's SMBIOS system files.I appreciate any advice. Please indicate the entire file directory so I can easily find the location of the files I need to modify. Have a nice day.

I suspect that System Profiler gets the serial number either by an internal call to the I/O registry which in turn has gotten it from the logic board firmware, or else directly from the firmware itself. If either of these mechanisms is correct, then there are NO files that carry the serial number, and therefore I think there is probably nothing you can change. This may be incorrect, but so far I've seen no evidence of a datafile that has this information.
By way of background, here is my understanding. Hopefully I will be corrected if I am wrong:
A file is a particular type of data structure, a collection of bytes assembled by the operating system in a specific way. Files usually reside on physical storage devices such as disk drives, and persist even after the computer is turned off. A user with sufficient privileges can generally access the information stored in a file.
There are, however, other types of OS data structures in the "kernel," below the level of the user interface. These structures are not files - it is not that they are "hidden files" or "system files" - they are not files at all. These data structures exist in a protected space that users cannot alter.
ioreg -l | grep IOPlatformSerialNumber | awk '{ print $4 }'
I have no idea exactly "where" this piece of information is coming from, meaning the serial number that appears. It would be greatly appreciated if you could help me track down exactly where on the system the terminal command here is pulling this info from. It clearly gets it from some place, but it just may not be something we can see on the system as an object.
According to the link I posted earlier, the ioreg terminal command directly displays (but cannot alter) the I/O registry. This data structure is not a file, and does not exist in the filesystem that you access via the GUI or via Terminal filesystem commands. Even worse, the link said:
the Registry is not stored on disk or archived between boots. Instead, it is built at each system boot and resides in memory
What this means is that the I/O Registry resides only in RAM - it is completely destroyed when you turn off the computer, and gets rebuilt when you start back up. And again, it is not a file.
That's why I said "This doesn't sound promising"!
there has to be a way to override the "connection" between the dynamic database itself and how it obtains information from it.
If System Profiler.app does either read the I/O registry or read the firmware directly, then this instruction may be hardcoded in the app itself. I don't know this, but if so then I don't think there is any way to get it to look "somewhere else."
Good luck, but I think this project is going to be "The Impossible Dream"

How to write program to list the system directory(content of pc)

how to write a program that will display all the folder n directory of the pc like:
+My Computer
+c:
+d:

Copy this line and save it in a file named "dirlist.bat":
for %%* in (%1) do dir /b %2 %1To use it, change to the directory it's in and at the command prompt type
dirlist directory [/s] directory is the name of the directory that you want listed.
/s is optional and will list the contents of all subdirectories also.
(You didn't say it had to be Java - use the right tool for the job)

New Cubes in Project System Business Content

Hi
I am going through the business Content Help. We have standard Cubes like 0PS_C02 for dates 0PS_C04 for Controlling, 0PS_C07 for Claims and so on
Also I see new cubes 0PS_C021 with different description Dates ( Identification using GUID) and 0PS_C041 FOR Controlling (Identification using GUID) and so on.
My question is what for these new cubes with Description Identification using GUID.
Thanks
Satish

Hi Satish,
I believe the 0PS_C041 , 0PS_C021 are the used when you create projects in R/3 using cProjects or xRPM. When you create a project in cProjects and replicate it, a corresponding project is created in R/3 which is identified by a 24 character String(this is the GUID). And the cubes 0PS_C041, 0PS_C021 in BW.... are used to store such projects information.
Hope this helps!!!
Rajesh.

Clipboard issue- Automatically copying content past into another system across the network.

Hi,
I am facing issue related clipboard in all windows platform in our organization. Say example: Person A copying something from any application or browser in his system and when he is going to past into another apps(word file or text file) in the same system,
its pasting some other text content, which is copied in another system, which is using by person B. Again Person B when is going to copy and paste something in his system, pasting content is from person C's system. It is happening in all system in our organization.
It is very terrific problem, which is seen first time in my life. It is happening intermittently in all system.
Our organization is mainly R&D and software development company, Developers using windows clipboard in local system, but not
in another system thru n etwork or LAN. I have installed updated windows patch, Forefront antivirus in all system and also run scan. Not found any virus. We are continuously trying to identify the issue. Yet we did not get any solution.
We are enterprise customer of Microsoft and we using many enterprise solution of Microsoft. I hope any one can help me on the same.
Thanks,
Nirupam Dandapat

Hi Nirupam,
This is weird. Please disconnect the network from these computer to check if they work fine.
This is also might be caused by some third-party software conflict. In such situation, I would suggest you perform a clean boot in Windows clients to rule out the cause of third party programs.
How to perform a clean boot in Windows
http://support.microsoft.com/kb/929135
Karen Hu
TechNet Community Support

Integrating Microsoft Filenet content Management system with oracle portal

1. Client is having Microsoft Filenet system as content management.
2. Client wants to integrate Filenet system with oracle portal.
3. Please confirm whether it is feasible or not and kindly suggest us the
document for integration process.

I think clue is on the this line;
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
make sure LDAP connection is working. Make sure use default ports for all connections. Most of the samples on the OTN uses default port, if you change them you, you have to modify sample code.

System landscpe_implementation content

Similar Messages

Maybe you are looking for